From ace3be4f15875d74344336b9754c14274f940969 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 27 May 2016 14:28:04 +0100 Subject: MIPS: Move cache sizes to Kconfig Move details of the L1 cache line sizes & total sizes into Kconfig, defaulting to 0. A new CONFIG_SYS_CACHE_SIZE_AUTO Kconfig entry is introduced to allow platforms to select auto-detection of cache sizes, and it defaults to being enabled if none of the cache sizes are set by the configuration (ie. sizes are all the default 0), and code is adjusted to #ifdef on that rather than on the definition of the sizes (which will always be defined even if 0). Signed-off-by: Paul Burton --- board/qca/ap121/Kconfig | 9 +++++++++ board/qca/ap143/Kconfig | 9 +++++++++ 2 files changed, 18 insertions(+) (limited to 'board/qca') diff --git a/board/qca/ap121/Kconfig b/board/qca/ap121/Kconfig index c3ecc8f62f..f28ea1cd44 100644 --- a/board/qca/ap121/Kconfig +++ b/board/qca/ap121/Kconfig @@ -12,4 +12,13 @@ config SYS_CONFIG_NAME config SYS_TEXT_BASE default 0x9f000000 +config SYS_DCACHE_SIZE + default 32768 + +config SYS_ICACHE_SIZE + default 65536 + +config SYS_CACHELINE_SIZE + default 32 + endif diff --git a/board/qca/ap143/Kconfig b/board/qca/ap143/Kconfig index 5ea5d6fbb0..ff02236d5d 100644 --- a/board/qca/ap143/Kconfig +++ b/board/qca/ap143/Kconfig @@ -12,4 +12,13 @@ config SYS_CONFIG_NAME config SYS_TEXT_BASE default 0x9f000000 +config SYS_DCACHE_SIZE + default 32768 + +config SYS_ICACHE_SIZE + default 65536 + +config SYS_CACHELINE_SIZE + default 32 + endif -- cgit v1.2.3