From 2d0401b1182e70234a184d73da57f5745f1c0598 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Fri, 2 Apr 2021 17:52:50 +0100
Subject: ARM: imx: udoo: Convert block devices to DM

Enable DM block, DM MMC and DM SATA support on iMX6 Udoo
convert board code to match the DM support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 board/udoo/udoo.c | 30 ------------------------------
 1 file changed, 30 deletions(-)

(limited to 'board/udoo')

diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c
index d83f23dd35..c1acc25a9d 100644
--- a/board/udoo/udoo.c
+++ b/board/udoo/udoo.c
@@ -19,8 +19,6 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/sata.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
@@ -56,15 +54,6 @@ static iomux_v3_cfg_t const uart2_pads[] = {
 	IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
 static iomux_v3_cfg_t const wdog_pads[] = {
 	IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19),
@@ -176,13 +165,6 @@ static void setup_iomux_wdog(void)
 	gpio_direction_input(WDT_TRG);
 }
 
-static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	return 1; /* Always present */
-}
-
 int board_eth_init(struct bd_info *bis)
 {
 	uint32_t base = IMX_FEC_BASE;
@@ -217,15 +199,6 @@ free_bus:
 	return ret;
 }
 
-int board_mmc_init(struct bd_info *bis)
-{
-	SETUP_IOMUX_PADS(usdhc3_pads);
-	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-	usdhc_cfg.max_bus_width = 4;
-
-	return fsl_esdhc_initialize(bis, &usdhc_cfg);
-}
-
 int board_early_init_f(void)
 {
 	setup_iomux_wdog();
@@ -248,9 +221,6 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-#ifdef CONFIG_SATA
-	setup_sata();
-#endif
 	return 0;
 }
 
-- 
cgit v1.2.3