From 918e9c3d638722e5169091594846462e7af69f47 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Mon, 25 May 2020 12:19:43 +0200 Subject: board: st: create common file stpmic1.c Move function board_ddr_power_init() in a new file stpmic1 in board/st/common to avoid duplicated code in each board using stpmic1 Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- board/dhelectronics/dh_stm32mp1/Makefile | 2 +- board/st/common/Makefile | 1 + board/st/common/stpmic1.c | 164 +++++++++++++++++++++++++++++++ board/st/stm32mp1/board.c | 158 ----------------------------- 4 files changed, 166 insertions(+), 159 deletions(-) create mode 100644 board/st/common/stpmic1.c (limited to 'board') diff --git a/board/dhelectronics/dh_stm32mp1/Makefile b/board/dhelectronics/dh_stm32mp1/Makefile index e8f218da08..5758d9816b 100644 --- a/board/dhelectronics/dh_stm32mp1/Makefile +++ b/board/dhelectronics/dh_stm32mp1/Makefile @@ -7,7 +7,7 @@ ifdef CONFIG_SPL_BUILD obj-y += ../../st/stm32mp1/spl.o endif -obj-y += ../../st/stm32mp1/board.o board.o +obj-y += ../../st/common/stpmic1.o board.o obj-$(CONFIG_SYS_MTDPARTS_RUNTIME) += ../../st/common/stm32mp_mtdparts.o obj-$(CONFIG_SET_DFU_ALT_INFO) += ../../st/common/stm32mp_dfu.o diff --git a/board/st/common/Makefile b/board/st/common/Makefile index aa030bacd8..012bfbbe8e 100644 --- a/board/st/common/Makefile +++ b/board/st/common/Makefile @@ -4,6 +4,7 @@ # obj-$(CONFIG_CMD_STBOARD) += cmd_stboard.o +obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o ifeq ($(CONFIG_ARCH_STM32MP),y) obj-$(CONFIG_SYS_MTDPARTS_RUNTIME) += stm32mp_mtdparts.o diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c new file mode 100644 index 0000000000..41111c5923 --- /dev/null +++ b/board/st/common/stpmic1.c @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include +#include +#include +#include +#include +#include +#include + +int board_ddr_power_init(enum ddr_type ddr_type) +{ + struct udevice *dev; + bool buck3_at_1800000v = false; + int ret; + u32 buck2; + + ret = uclass_get_device_by_driver(UCLASS_PMIC, + DM_GET_DRIVER(pmic_stpmic1), &dev); + if (ret) + /* No PMIC on board */ + return 0; + + switch (ddr_type) { + case STM32MP_DDR3: + /* VTT = Set LDO3 to sync mode */ + ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); + if (ret < 0) + return ret; + + ret &= ~STPMIC1_LDO3_MODE; + ret &= ~STPMIC1_LDO12356_VOUT_MASK; + ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL); + + ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + ret); + if (ret < 0) + return ret; + + /* VDD_DDR = Set BUCK2 to 1.35V */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_VOUT_MASK, + STPMIC1_BUCK2_1350000V); + if (ret < 0) + return ret; + + /* Enable VDD_DDR = BUCK2 */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VREF */ + ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, + STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VTT = LDO3 */ + ret = pmic_clrsetbits(dev, + STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + break; + + case STM32MP_LPDDR2_16: + case STM32MP_LPDDR2_32: + case STM32MP_LPDDR3_16: + case STM32MP_LPDDR3_32: + /* + * configure VDD_DDR1 = LDO3 + * Set LDO3 to 1.8V + * + bypass mode if BUCK3 = 1.8V + * + normal mode if BUCK3 != 1.8V + */ + ret = pmic_reg_read(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3)); + if (ret < 0) + return ret; + + if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V) + buck3_at_1800000v = true; + + ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); + if (ret < 0) + return ret; + + ret &= ~STPMIC1_LDO3_MODE; + ret &= ~STPMIC1_LDO12356_VOUT_MASK; + ret |= STPMIC1_LDO3_1800000; + if (buck3_at_1800000v) + ret |= STPMIC1_LDO3_MODE; + + ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + ret); + if (ret < 0) + return ret; + + /* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/ + switch (ddr_type) { + case STM32MP_LPDDR2_32: + case STM32MP_LPDDR3_32: + buck2 = STPMIC1_BUCK2_1250000V; + break; + default: + case STM32MP_LPDDR2_16: + case STM32MP_LPDDR3_16: + buck2 = STPMIC1_BUCK2_1200000V; + break; + } + + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_VOUT_MASK, + buck2); + if (ret < 0) + return ret; + + /* Enable VDD_DDR1 = LDO3 */ + ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VDD_DDR2 =BUCK2 */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VREF */ + ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, + STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + break; + + default: + break; + }; + + return 0; +} diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c index c218d37ecc..00c61c2886 100644 --- a/board/st/stm32mp1/board.c +++ b/board/st/stm32mp1/board.c @@ -4,13 +4,9 @@ */ #include -#include #include -#include #include #include -#include -#include #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) @@ -38,157 +34,3 @@ void board_debug_uart_init(void) #endif } #endif - -#ifdef CONFIG_PMIC_STPMIC1 -int board_ddr_power_init(enum ddr_type ddr_type) -{ - struct udevice *dev; - bool buck3_at_1800000v = false; - int ret; - u32 buck2; - - ret = uclass_get_device_by_driver(UCLASS_PMIC, - DM_GET_DRIVER(pmic_stpmic1), &dev); - if (ret) - /* No PMIC on board */ - return 0; - - switch (ddr_type) { - case STM32MP_DDR3: - /* VTT = Set LDO3 to sync mode */ - ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); - if (ret < 0) - return ret; - - ret &= ~STPMIC1_LDO3_MODE; - ret &= ~STPMIC1_LDO12356_VOUT_MASK; - ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL); - - ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), - ret); - if (ret < 0) - return ret; - - /* VDD_DDR = Set BUCK2 to 1.35V */ - ret = pmic_clrsetbits(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), - STPMIC1_BUCK_VOUT_MASK, - STPMIC1_BUCK2_1350000V); - if (ret < 0) - return ret; - - /* Enable VDD_DDR = BUCK2 */ - ret = pmic_clrsetbits(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), - STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - /* Enable VREF */ - ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, - STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - /* Enable VTT = LDO3 */ - ret = pmic_clrsetbits(dev, - STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), - STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - break; - - case STM32MP_LPDDR2_16: - case STM32MP_LPDDR2_32: - case STM32MP_LPDDR3_16: - case STM32MP_LPDDR3_32: - /* - * configure VDD_DDR1 = LDO3 - * Set LDO3 to 1.8V - * + bypass mode if BUCK3 = 1.8V - * + normal mode if BUCK3 != 1.8V - */ - ret = pmic_reg_read(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3)); - if (ret < 0) - return ret; - - if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V) - buck3_at_1800000v = true; - - ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); - if (ret < 0) - return ret; - - ret &= ~STPMIC1_LDO3_MODE; - ret &= ~STPMIC1_LDO12356_VOUT_MASK; - ret |= STPMIC1_LDO3_1800000; - if (buck3_at_1800000v) - ret |= STPMIC1_LDO3_MODE; - - ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), - ret); - if (ret < 0) - return ret; - - /* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/ - switch (ddr_type) { - case STM32MP_LPDDR2_32: - case STM32MP_LPDDR3_32: - buck2 = STPMIC1_BUCK2_1250000V; - break; - default: - case STM32MP_LPDDR2_16: - case STM32MP_LPDDR3_16: - buck2 = STPMIC1_BUCK2_1200000V; - break; - } - - ret = pmic_clrsetbits(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), - STPMIC1_BUCK_VOUT_MASK, - buck2); - if (ret < 0) - return ret; - - /* Enable VDD_DDR1 = LDO3 */ - ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), - STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - /* Enable VDD_DDR2 =BUCK2 */ - ret = pmic_clrsetbits(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), - STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - /* Enable VREF */ - ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, - STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - break; - - default: - break; - }; - - return 0; -} -#endif -- cgit v1.2.3