From aa697e6904ba1b3144a46ec642d4695e7c0cdc3e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 22 May 2021 08:47:10 -0400 Subject: arm: Remove nsa310s board These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Gerald Kerma Cc: Tony Dinh Cc: Luka Perkov Signed-off-by: Tom Rini --- board/zyxel/nsa310s/Kconfig | 18 ------ board/zyxel/nsa310s/MAINTAINERS | 8 --- board/zyxel/nsa310s/Makefile | 7 -- board/zyxel/nsa310s/kwbimage.cfg | 41 ------------ board/zyxel/nsa310s/nsa310s.c | 135 --------------------------------------- board/zyxel/nsa310s/nsa310s.h | 46 ------------- 6 files changed, 255 deletions(-) delete mode 100644 board/zyxel/nsa310s/Kconfig delete mode 100644 board/zyxel/nsa310s/MAINTAINERS delete mode 100644 board/zyxel/nsa310s/Makefile delete mode 100644 board/zyxel/nsa310s/kwbimage.cfg delete mode 100644 board/zyxel/nsa310s/nsa310s.c delete mode 100644 board/zyxel/nsa310s/nsa310s.h (limited to 'board') diff --git a/board/zyxel/nsa310s/Kconfig b/board/zyxel/nsa310s/Kconfig deleted file mode 100644 index 801d6966ea..0000000000 --- a/board/zyxel/nsa310s/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 -# Gerald Kerma -# Tony Dinh - -if TARGET_NSA310S - -config SYS_BOARD - default "nsa310s" - -config SYS_VENDOR - default "zyxel" - -config SYS_CONFIG_NAME - default "nsa310s" - -endif diff --git a/board/zyxel/nsa310s/MAINTAINERS b/board/zyxel/nsa310s/MAINTAINERS deleted file mode 100644 index d153758c21..0000000000 --- a/board/zyxel/nsa310s/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -NSA310S BOARD -M: Gerald Kerma -M: Tony Dinh -M: Luka Perkov -S: Maintained -F: board/zyxel/nsa310s/ -F: include/configs/nsa310s.h -F: configs/nsa310s_defconfig diff --git a/board/zyxel/nsa310s/Makefile b/board/zyxel/nsa310s/Makefile deleted file mode 100644 index 2131e28db3..0000000000 --- a/board/zyxel/nsa310s/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 -# Gerald Kerma -# Tony Dinh - -obj-y := nsa310s.o diff --git a/board/zyxel/nsa310s/kwbimage.cfg b/board/zyxel/nsa310s/kwbimage.cfg deleted file mode 100644 index 9ebdeab94d..0000000000 --- a/board/zyxel/nsa310s/kwbimage.cfg +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 -# Gerald Kerma -# Tony Dinh -# Refer to doc/README.kwbimage for more details about how-to -# configure and create kirkwood boot images. -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -DATA 0xFFD01400 0x43010c30 -DATA 0xFFD01404 0x39543000 -DATA 0xFFD01408 0x22125451 -DATA 0xFFD0140C 0x00000833 -DATA 0xFFD01410 0x0000000C -DATA 0xFFD01414 0x00000000 -DATA 0xFFD01418 0x00000000 -DATA 0xFFD0141C 0x00000652 -DATA 0xFFD01420 0x00000004 -DATA 0xFFD01424 0x0000F17F -DATA 0xFFD01428 0x00085520 -DATA 0xFFD0147c 0x00008552 -DATA 0xFFD01504 0x0FFFFFF1 -DATA 0xFFD01508 0x10000000 -DATA 0xFFD0150C 0x00000000 -DATA 0xFFD01514 0x00000000 -DATA 0xFFD0151C 0x00000000 -DATA 0xFFD01494 0x00010000 -DATA 0xFFD01498 0x00000000 -DATA 0xFFD0149C 0x0000E403 -DATA 0xFFD01480 0x00000001 -DATA 0xFFD20134 0x66666666 -DATA 0xFFD20138 0x66666666 -DATA 0x0 0x0 diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c deleted file mode 100644 index cd4a7723b1..0000000000 --- a/board/zyxel/nsa310s/nsa310s.c +++ /dev/null @@ -1,135 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2015 - * Gerald Kerma - * Tony Dinh - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "nsa310s.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(NSA310S_VAL_LOW, NSA310S_VAL_HIGH, - NSA310S_OE_LOW, NSA310S_OE_HIGH); - - /* (all LEDs & power off active high) */ - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, - MPP13_GPIO, - MPP14_GPIO, - MPP15_GPIO, - MPP16_GPIO, - MPP17_GPIO, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ - u16 reg; - u16 phyaddr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* read PHY dev address */ - if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) { - printf("could not read PHY dev address\n"); - return; - } - - /* set RGMII delay */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG); - miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®); - reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL); - miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg); - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0); - - /* reset PHY */ - if (miiphy_reset(name, phyaddr)) - return; - - /* - * ZyXEL NSA310S uses the 88E1310S Alaska (interface identical to 88E1318) - * and has an MCU attached to the LED[2] via tristate interrupt - */ - - /* switch to LED register page */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_LED_PG); - /* read out LED polarity register */ - miiphy_read(name, phyaddr, MV88E1318_LED_POL_REG, ®); - /* clear 4, set 5 - LED2 low, tri-state */ - reg &= ~(MV88E1318_LED2_4); - reg |= (MV88E1318_LED2_5); - /* write back LED polarity register */ - miiphy_write(name, phyaddr, MV88E1318_LED_POL_REG, reg); - /* jump back to page 0, per the PHY chip documenation. */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0); - - /* set PHY back to auto-negotiation mode */ - miiphy_write(name, phyaddr, 0x4, 0x1e1); - miiphy_write(name, phyaddr, 0x9, 0x300); - /* downshift */ - miiphy_write(name, phyaddr, 0x10, 0x3860); - miiphy_write(name, phyaddr, 0x0, 0x9140); -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/zyxel/nsa310s/nsa310s.h b/board/zyxel/nsa310s/nsa310s.h deleted file mode 100644 index d8bd9a586f..0000000000 --- a/board/zyxel/nsa310s/nsa310s.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 - * Gerald Kerma - * Tony Dinh - */ - -#ifndef __NSA310S_H -#define __NSA310S_H - -/* low GPIO's */ -#define HDD1_GREEN_LED (1 << 16) -#define HDD1_RED_LED (1 << 13) -#define USB_GREEN_LED (1 << 15) -#define USB_POWER (1 << 21) -#define SYS_GREEN_LED (1 << 28) -#define SYS_ORANGE_LED (1 << 29) - -#define COPY_GREEN_LED (1 << 22) -#define COPY_RED_LED (1 << 23) - -#define PIN_USB_GREEN_LED 15 -#define PIN_USB_POWER 21 - -#define NSA310S_OE_LOW (~(0)) -#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER) - -/* high GPIO's */ -#define HDD2_GREEN_LED (1 << 2) -#define HDD2_POWER (1 << 1) - -#define NSA310S_OE_HIGH (~(0)) -#define NSA310S_VAL_HIGH (HDD2_POWER) - -/* PHY related */ -#define MV88E1318_PGADR_REG 22 -#define MV88E1318_MAC_CTRL_PG 2 -#define MV88E1318_MAC_CTRL_REG 21 -#define MV88E1318_RGMII_TX_CTRL (1 << 4) -#define MV88E1318_RGMII_RX_CTRL (1 << 5) -#define MV88E1318_LED_PG 3 -#define MV88E1318_LED_POL_REG 17 -#define MV88E1318_LED2_4 (1 << 4) -#define MV88E1318_LED2_5 (1 << 5) - -#endif /* __NSA310S_H */ -- cgit v1.2.3