From ba787bb458b39117341c0098f5d99a9ce9f3d278 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 30 May 2022 17:01:22 -0400 Subject: spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files - Move all PowerPC (and some shared with Layerscape) options to common/spl/Kconfig.nxp - Move all other TPL related options to common/spl/Kconfig.tpl - Move all VPL related options to common/spl/Kconfig.vpl This makes the whole of common/spl/Kconfig slightly more readable. Signed-off-by: Tom Rini --- common/spl/Kconfig.nxp | 124 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 common/spl/Kconfig.nxp (limited to 'common/spl/Kconfig.nxp') diff --git a/common/spl/Kconfig.nxp b/common/spl/Kconfig.nxp new file mode 100644 index 0000000000..8da85539af --- /dev/null +++ b/common/spl/Kconfig.nxp @@ -0,0 +1,124 @@ +menu "PowerPC and LayerScape SPL Boot options" + depends on (PPC && SUPPORT_SPL && !SPL_FRAMEWORK) || \ + ((ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && SUPPORT_SPL) + +config SPL_NAND_BOOT + bool "Load SPL from NAND flash" + depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) + +config SPL_MMC_BOOT + bool "Load SPL from SD Card / eMMC" + depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) + +config SPL_SPI_BOOT + bool "Load SPL from SPI flash" + depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) + +config SPL_FSL_PBL + bool "Create SPL in Freescale PBI format" + depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \ + SUPPORT_SPL + help + Create boot binary having SPL binary in PBI format concatenated with + u-boot binary. + +config SPL_SYS_CCSR_DO_NOT_RELOCATE + bool "Ensures that CCSR is not relocated" + depends on PPC + help + If this is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a + value that ensures that CCSR is not relocated. + +config TPL_SYS_CCSR_DO_NOT_RELOCATE + def_bool y + depends on SPL_SYS_CCSR_DO_NOT_RELOCATE + +menu "PowerPC SPL / TPL specific options" + depends on PPC && (SPL && !SPL_FRAMEWORK) + +config SPL_INIT_MINIMAL + bool "Arch init code will be built for a very small image" + +config SPL_FLUSH_IMAGE + bool "Clean dcache and invalidate icache after loading the image" + +config SPL_SKIP_RELOCATE + bool "Skip relocating SPL" + +config SPL_GD_ADDR + hex "Address to use for global data (gd) in SPL" + depends on !SPL_INIT_MINIMAL + +config SPL_RELOC_TEXT_BASE + hex "Address to relocate SPL to" + default SPL_TEXT_BASE + help + If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no + relocation is done). + +config SPL_RELOC_STACK + hex "Address of the start of the stack SPL will use after relocation." + help + If unspecified, this is equal to CONFIG_SYS_SPL_MALLOC_START. Starting + address of the malloc pool used in SPL. When this option is set the full + malloc is used in SPL and it is set up by spl_init() and before that, the + simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. + +config SPL_RELOC_MALLOC + bool "SPL has malloc pool after relocation" + +config SPL_RELOC_MALLOC_ADDR + hex "Address of malloc pool in SPL" + depends on SPL_RELOC_MALLOC + +config SPL_RELOC_MALLOC_SIZE + hex "Size of malloc pool in SPL" + depends on SPL_RELOC_MALLOC + +config TPL_GD_ADDR + hex "Address to use for global data (gd) in TPL" + depends on TPL + +config TPL_RELOC_TEXT_BASE + hex "Address to relocate TPL to" + depends on TPL + default TPL_TEXT_BASE + help + If unspecified, this is equal to CONFIG_TPL_TEXT_BASE (i.e. no + relocation is done). + +config TPL_RELOC_STACK + hex "Address of the start of the stack TPL will use after relocation." + depends on TPL + help + If unspecified, this is equal to CONFIG_SYS_TPL_MALLOC_START. Starting + address of the malloc pool used in TPL. When this option is set the full + malloc is used in TPL and it is set up by spl_init() and before that, the + simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. + +config TPL_RELOC_MALLOC + bool "TPL has malloc pool after relocation" + depends on TPL + +config TPL_RELOC_MALLOC_ADDR + hex "Address of malloc pool in TPL" + depends on TPL_RELOC_MALLOC + +config TPL_RELOC_MALLOC_SIZE + hex "Size of malloc pool in TPL" + depends on TPL_RELOC_MALLOC + +config TPL_PAD_TO + hex "Offset to which the TPL should be padded before appending the TPL payload" + depends on TPL && !TPL_FRAMEWORK + default TPL_MAX_SIZE + help + Image offset to which the TPL should be padded before appending the + TPL payload. By default, this is defined as CONFIG_TPL_MAX_SIZE, or 0 if + CONFIG_TPL_MAX_SIZE is undefined. CONFIG_TPL_PAD_TO must be either + 0, meaning to append the TPL payload without any padding, or >= + CONFIG_TPL_MAX_SIZE. +endmenu + +endmenu + -- cgit v1.2.3