From 3e0cda071a67cb5709e3fa4faf6b31a731859acc Mon Sep 17 00:00:00 2001 From: Stelian Pop Date: Sun, 9 Nov 2008 00:14:46 +0100 Subject: AT91: Enable PLLB for USB At least some (old ?) versions of the AT91Bootstrap do not set up the PLLB correctly to 48 MHz in order to make USB host function correctly. This patch sets up the PLLB to the same values Linux uses, and makes USB work ok on the following CPUs: - AT91CAP9 - AT91SAM9260 - AT91SAM9263 This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all the relevant AT91CAP9/AT91SAM9 atmel boards. Signed-off-by: Stelian Pop Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- cpu/arm926ejs/at91/usb.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'cpu') diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c index 7cb082db1b..2f5c337474 100644 --- a/cpu/arm926ejs/at91/usb.c +++ b/cpu/arm926ejs/at91/usb.c @@ -31,6 +31,15 @@ int usb_cpu_init(void) { + +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ + defined(CONFIG_AT91SAM9263) + /* Enable PLLB */ + at91_sys_write(AT91_CKGR_PLLBR, CFG_AT91_PLLB); + while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) + ; +#endif + /* Enable USB host clock. */ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); #ifdef CONFIG_AT91SAM9261 @@ -51,6 +60,15 @@ int usb_cpu_stop(void) #else at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); #endif + +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ + defined(CONFIG_AT91SAM9263) + /* Disable PLLB */ + at91_sys_write(AT91_CKGR_PLLBR, 0); + while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0) + ; +#endif + return 0; } -- cgit v1.2.3