From 6150295061cc5f4d362d9fbdb7f268edc2d90902 Mon Sep 17 00:00:00 2001 From: Oleksandr Suvorov Date: Fri, 23 Jul 2021 09:39:47 +0300 Subject: board: colibri-imx8x: update building documentation Update the documentation on how to build the u-boot image for Colibri iMX8QXP, adding support of V1.0D revision of the module. Signed-off-by: Oleksandr Suvorov --- doc/board/toradex/colibri-imx8x.rst | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) (limited to 'doc/board') diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst index 616f40ae0f..545568c844 100644 --- a/doc/board/toradex/colibri-imx8x.rst +++ b/doc/board/toradex/colibri-imx8x.rst @@ -1,6 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0+ -Colibri iMX8QXP V1.0B Module +Colibri iMX8QXP V1.0D Module ============================ Quick Start @@ -18,34 +18,23 @@ Get and Build the ARM Trusted Firmware .. code-block:: bash - $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf - $ cd imx-atf/ - $ make PLAT=imx8qxp bl31 + $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git/ + $ make PLAT=imx8qx bl31 -C imx-atf Get scfw_tcm.bin and ahab-container.img --------------------------------------- .. code-block:: bash - $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/ - toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes- - bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true - $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin - $ chmod +x firmware-imx-8.0.bin - $ ./firmware-imx-8.0.bin - -Copy the following binaries to the U-Boot folder: - -.. code-block:: bash - - $ cp imx-atf/build/imx8qxp/release/bl31.bin . - $ cp u-boot/u-boot.bin . + $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin + $ sh imx-seco-3.7.4.bin --auto-accept Copy the following firmware to the U-Boot folder: .. code-block:: bash - $ cp firmware-imx-8.0/firmware/seco/ahab-container.img . + $ cp imx-atf/build/imx8qx/release/bl31.bin . + $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img Build U-Boot ------------ -- cgit v1.2.3