From 39920c81ce4431b7ea08f5e80feb5ec8b156864e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 3 Aug 2015 19:20:26 +0200 Subject: sunxi: display: Add composite video out support Add composite video out support. This only gets enabled on the Mele M3 for now, since that is were it was tested. It will be enabled on more boards after testing. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- doc/README.video | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/README.video b/doc/README.video index d0a3ad6e8d..4f7a4b5db5 100644 --- a/doc/README.video +++ b/doc/README.video @@ -40,12 +40,15 @@ requires the CONFIG_VIDEO_LCD_MODE Kconfig value to be set. The sunxi u-boot driver supports the following video-mode options: -- monitor=[none|dvi|hdmi|lcd] - Select the video output to use +- monitor=[none|dvi|hdmi|lcd|vga|composite-*] - Select the video output to use none: Disable video output. dvi/hdmi: Selects output over the hdmi connector with dvi resp. hdmi output format, if edid is used the format is automatically selected. lcd: Selects video output to a LCD screen. - vga: Selects bideo output over the VGA connector. + vga: Selects video output over the VGA connector. + composite-pal/composite-ntsc/composite-pal-m/composite-pal-nc: + Selects composite video output, note the specified resolution is + ignored with composite video output. Defaults to monitor=dvi. - hpd=[0|1] - Enable use of the hdmi HotPlug Detect feature -- cgit v1.2.3