From 4689aabbe4c21d6721de1b5b742bb3df3af74317 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 21 Jul 2021 21:28:49 +0530 Subject: doc: board: j721e_evm: Add documentation for firmware loading Add documentation for loading firmwares to be used by remote cores in the system including the environment variables that has to be set to load the firmwares. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lokesh Vutla Link: https://lore.kernel.org/r/20210721155849.20994-21-kishon@ti.com --- doc/board/ti/j721e_evm.rst | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'doc') diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst index 8b460709d1..44dc316afd 100644 --- a/doc/board/ti/j721e_evm.rst +++ b/doc/board/ti/j721e_evm.rst @@ -314,3 +314,18 @@ Flash layout for OSPI: | ospi.rootfs(UBIFS) | | | +----------------------------+ + +Firmwares: +---------- + +The J721e u-boot allows firmware to be loaded for the Cortex-R5 subsystem. +The CPSW5G in J7200 and CPSW9G in J721E present in MAIN domain is configured +and controlled by the ethernet firmware that executes in the MAIN Cortex R5. +The default supported environment variables support loading these firmwares +from only MMC. "dorprocboot" env variable has to be set for the U-BOOT to load +and start the remote cores in the system. + +J721E common processor board can be attached to a Ethernet QSGMII card and the +PHY in the card has to be reset before it can be used for data transfer. +"do_main_cpsw0_qsgmii_phyinit" env variable has to be set for the U-BOOT to +configure this PHY. -- cgit v1.2.3