From b05cebb5f244f2891b40397ce2eb0f4596fec659 Mon Sep 17 00:00:00 2001 From: Patrick Wildt Date: Sat, 8 Jan 2022 16:34:17 +0100 Subject: imx8mq: Generate a single bootable flash.bin again All i.MX8MQ boards have been converted to binman, which makes it necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to the conversion, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mq_evk.rst to remove the u-boot.itb copy step. This is a cherry-pick of 028abfd9b157 ("imx8mm-evk: Generate a single bootable flash.bin again") adjusted to apply to i.MX8MQ. Signed-off-by: Patrick Wildt Reviewed-by: Fabio Estevam --- doc/board/nxp/imx8mq_evk.rst | 1 - 1 file changed, 1 deletion(-) (limited to 'doc') diff --git a/doc/board/nxp/imx8mq_evk.rst b/doc/board/nxp/imx8mq_evk.rst index 92eeda79aa..aa1ecfb47a 100644 --- a/doc/board/nxp/imx8mq_evk.rst +++ b/doc/board/nxp/imx8mq_evk.rst @@ -50,7 +50,6 @@ Burn the flash.bin to MicroSD card offset 33KB: .. code-block:: bash $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc - $sudo dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=notrunc Boot ---- -- cgit v1.2.3