From ed205e677b6f99fed7bb51155a69ad8f5c9df8e1 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Thu, 18 Jul 2019 00:33:49 -0700 Subject: doc: driver-model: Convert README.txt to reST Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng Reviewed-by: Heinrich Schuchardt --- doc/driver-model/README.txt | 914 ------------------------------------------ doc/driver-model/design.rst | 939 ++++++++++++++++++++++++++++++++++++++++++++ doc/driver-model/index.rst | 2 + 3 files changed, 941 insertions(+), 914 deletions(-) delete mode 100644 doc/driver-model/README.txt create mode 100644 doc/driver-model/design.rst (limited to 'doc') diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt deleted file mode 100644 index 532a771f68..0000000000 --- a/doc/driver-model/README.txt +++ /dev/null @@ -1,914 +0,0 @@ -Driver Model -============ - -This README contains high-level information about driver model, a unified -way of declaring and accessing drivers in U-Boot. The original work was done -by: - - Marek Vasut - Pavel Herrmann - Viktor Křivák - Tomas Hlavacek - -This has been both simplified and extended into the current implementation -by: - - Simon Glass - - -Terminology ------------ - -Uclass - a group of devices which operate in the same way. A uclass provides - a way of accessing individual devices within the group, but always - using the same interface. For example a GPIO uclass provides - operations for get/set value. An I2C uclass may have 10 I2C ports, - 4 with one driver, and 6 with another. - -Driver - some code which talks to a peripheral and presents a higher-level - interface to it. - -Device - an instance of a driver, tied to a particular port or peripheral. - - -How to try it -------------- - -Build U-Boot sandbox and run it: - - make sandbox_defconfig - make - ./u-boot -d u-boot.dtb - - (type 'reset' to exit U-Boot) - - -There is a uclass called 'demo'. This uclass handles -saying hello, and reporting its status. There are two drivers in this -uclass: - - - simple: Just prints a message for hello, doesn't implement status - - shape: Prints shapes and reports number of characters printed as status - -The demo class is pretty simple, but not trivial. The intention is that it -can be used for testing, so it will implement all driver model features and -provide good code coverage of them. It does have multiple drivers, it -handles parameter data and platdata (data which tells the driver how -to operate on a particular platform) and it uses private driver data. - -To try it, see the example session below: - -=>demo hello 1 -Hello '@' from 07981110: red 4 -=>demo status 2 -Status: 0 -=>demo hello 2 -g -r@ -e@@ -e@@@ -n@@@@ -g@@@@@ -=>demo status 2 -Status: 21 -=>demo hello 4 ^ - y^^^ - e^^^^^ -l^^^^^^^ -l^^^^^^^ - o^^^^^ - w^^^ -=>demo status 4 -Status: 36 -=> - - -Running the tests ------------------ - -The intent with driver model is that the core portion has 100% test coverage -in sandbox, and every uclass has its own test. As a move towards this, tests -are provided in test/dm. To run them, try: - - ./test/py/test.py --bd sandbox --build -k ut_dm -v - -You should see something like this: - -(venv)$ ./test/py/test.py --bd sandbox --build -k ut_dm -v -+make O=/root/u-boot/build-sandbox -s sandbox_defconfig -+make O=/root/u-boot/build-sandbox -s -j8 -============================= test session starts ============================== -platform linux2 -- Python 2.7.5, pytest-2.9.0, py-1.4.31, pluggy-0.3.1 -- /root/u-boot/venv/bin/python -cachedir: .cache -rootdir: /root/u-boot, inifile: -collected 199 items - -test/py/tests/test_ut.py::test_ut_dm_init PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_bind] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_multi_channel_conversion] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_multi_channel_shot] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_single_channel_conversion] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_single_channel_shot] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_supply] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_adc_wrong_channel_selection] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_autobind] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_autobind_uclass_pdata_alloc] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_autobind_uclass_pdata_valid] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_autoprobe] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_post_bind] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_post_bind_uclass] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_pre_probe_uclass] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_children] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_children_funcs] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_children_iterators] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_data] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_data_uclass] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_ops] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_platdata] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_platdata_uclass] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_children] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_clk_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_clk_periph] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_device_get_uclass_id] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_eth] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_eth_act] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_eth_alias] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_eth_prime] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_eth_rotate] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_fdt] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_fdt_offset] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_fdt_pre_reloc] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_fdt_uclass_seq] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_gpio] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_gpio_anon] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_gpio_copy] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_gpio_leak] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_gpio_phandles] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_gpio_requestf] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_bytewise] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_find] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_offset] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_offset_len] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_probe_empty] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_read_write] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_i2c_speed] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_leak] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_led_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_led_gpio] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_led_label] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_lifecycle] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_mmc_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_net_retry] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_operations] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_ordering] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_pci_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_pci_busnum] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_pci_swapcase] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_platdata] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_pmic_get] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_pmic_io] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_autoset] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_autoset_list] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_get] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_current] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_enable] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_mode] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_voltage] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_pre_reloc] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_ram_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_regmap_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_regmap_syscon] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_remoteproc_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_remove] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_reset_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_reset_walk] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_rtc_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_rtc_dual] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_rtc_reset] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_rtc_set_get] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_spi_find] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_spi_flash] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_spi_xfer] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_syscon_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_syscon_by_driver_data] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_timer_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_uclass] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_uclass_before_ready] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_find] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_find_by_name] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_get] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_get_by_name] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_flash] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_keyb] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_multi] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_remove] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree_remove] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree_reorder] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_base] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_bmp] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_bmp_comp] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_chars] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_context] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation1] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation2] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation3] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_text] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype_bs] PASSED -test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype_scroll] PASSED - -======================= 84 tests deselected by '-kut_dm' ======================= -================== 115 passed, 84 deselected in 3.77 seconds =================== - -What is going on? ------------------ - -Let's start at the top. The demo command is in common/cmd_demo.c. It does -the usual command processing and then: - - struct udevice *demo_dev; - - ret = uclass_get_device(UCLASS_DEMO, devnum, &demo_dev); - -UCLASS_DEMO means the class of devices which implement 'demo'. Other -classes might be MMC, or GPIO, hashing or serial. The idea is that the -devices in the class all share a particular way of working. The class -presents a unified view of all these devices to U-Boot. - -This function looks up a device for the demo uclass. Given a device -number we can find the device because all devices have registered with -the UCLASS_DEMO uclass. - -The device is automatically activated ready for use by uclass_get_device(). - -Now that we have the device we can do things like: - - return demo_hello(demo_dev, ch); - -This function is in the demo uclass. It takes care of calling the 'hello' -method of the relevant driver. Bearing in mind that there are two drivers, -this particular device may use one or other of them. - -The code for demo_hello() is in drivers/demo/demo-uclass.c: - -int demo_hello(struct udevice *dev, int ch) -{ - const struct demo_ops *ops = device_get_ops(dev); - - if (!ops->hello) - return -ENOSYS; - - return ops->hello(dev, ch); -} - -As you can see it just calls the relevant driver method. One of these is -in drivers/demo/demo-simple.c: - -static int simple_hello(struct udevice *dev, int ch) -{ - const struct dm_demo_pdata *pdata = dev_get_platdata(dev); - - printf("Hello from %08x: %s %d\n", map_to_sysmem(dev), - pdata->colour, pdata->sides); - - return 0; -} - - -So that is a trip from top (command execution) to bottom (driver action) -but it leaves a lot of topics to address. - - -Declaring Drivers ------------------ - -A driver declaration looks something like this (see -drivers/demo/demo-shape.c): - -static const struct demo_ops shape_ops = { - .hello = shape_hello, - .status = shape_status, -}; - -U_BOOT_DRIVER(demo_shape_drv) = { - .name = "demo_shape_drv", - .id = UCLASS_DEMO, - .ops = &shape_ops, - .priv_data_size = sizeof(struct shape_data), -}; - - -This driver has two methods (hello and status) and requires a bit of -private data (accessible through dev_get_priv(dev) once the driver has -been probed). It is a member of UCLASS_DEMO so will register itself -there. - -In U_BOOT_DRIVER it is also possible to specify special methods for bind -and unbind, and these are called at appropriate times. For many drivers -it is hoped that only 'probe' and 'remove' will be needed. - -The U_BOOT_DRIVER macro creates a data structure accessible from C, -so driver model can find the drivers that are available. - -The methods a device can provide are documented in the device.h header. -Briefly, they are: - - bind - make the driver model aware of a device (bind it to its driver) - unbind - make the driver model forget the device - ofdata_to_platdata - convert device tree data to platdata - see later - probe - make a device ready for use - remove - remove a device so it cannot be used until probed again - -The sequence to get a device to work is bind, ofdata_to_platdata (if using -device tree) and probe. - - -Platform Data -------------- - -*** Note: platform data is the old way of doing things. It is -*** basically a C structure which is passed to drivers to tell them about -*** platform-specific settings like the address of its registers, bus -*** speed, etc. Device tree is now the preferred way of handling this. -*** Unless you have a good reason not to use device tree (the main one -*** being you need serial support in SPL and don't have enough SRAM for -*** the cut-down device tree and libfdt libraries) you should stay away -*** from platform data. - -Platform data is like Linux platform data, if you are familiar with that. -It provides the board-specific information to start up a device. - -Why is this information not just stored in the device driver itself? The -idea is that the device driver is generic, and can in principle operate on -any board that has that type of device. For example, with modern -highly-complex SoCs it is common for the IP to come from an IP vendor, and -therefore (for example) the MMC controller may be the same on chips from -different vendors. It makes no sense to write independent drivers for the -MMC controller on each vendor's SoC, when they are all almost the same. -Similarly, we may have 6 UARTs in an SoC, all of which are mostly the same, -but lie at different addresses in the address space. - -Using the UART example, we have a single driver and it is instantiated 6 -times by supplying 6 lots of platform data. Each lot of platform data -gives the driver name and a pointer to a structure containing information -about this instance - e.g. the address of the register space. It may be that -one of the UARTS supports RS-485 operation - this can be added as a flag in -the platform data, which is set for this one port and clear for the rest. - -Think of your driver as a generic piece of code which knows how to talk to -a device, but needs to know where it is, any variant/option information and -so on. Platform data provides this link between the generic piece of code -and the specific way it is bound on a particular board. - -Examples of platform data include: - - - The base address of the IP block's register space - - Configuration options, like: - - the SPI polarity and maximum speed for a SPI controller - - the I2C speed to use for an I2C device - - the number of GPIOs available in a GPIO device - -Where does the platform data come from? It is either held in a structure -which is compiled into U-Boot, or it can be parsed from the Device Tree -(see 'Device Tree' below). - -For an example of how it can be compiled in, see demo-pdata.c which -sets up a table of driver names and their associated platform data. -The data can be interpreted by the drivers however they like - it is -basically a communication scheme between the board-specific code and -the generic drivers, which are intended to work on any board. - -Drivers can access their data via dev->info->platdata. Here is -the declaration for the platform data, which would normally appear -in the board file. - - static const struct dm_demo_cdata red_square = { - .colour = "red", - .sides = 4. - }; - static const struct driver_info info[] = { - { - .name = "demo_shape_drv", - .platdata = &red_square, - }, - }; - - demo1 = driver_bind(root, &info[0]); - - -Device Tree ------------ - -While platdata is useful, a more flexible way of providing device data is -by using device tree. In U-Boot you should use this where possible. Avoid -sending patches which make use of the U_BOOT_DEVICE() macro unless strictly -necessary. - -With device tree we replace the above code with the following device tree -fragment: - - red-square { - compatible = "demo-shape"; - colour = "red"; - sides = <4>; - }; - -This means that instead of having lots of U_BOOT_DEVICE() declarations in -the board file, we put these in the device tree. This approach allows a lot -more generality, since the same board file can support many types of boards -(e,g. with the same SoC) just by using different device trees. An added -benefit is that the Linux device tree can be used, thus further simplifying -the task of board-bring up either for U-Boot or Linux devs (whoever gets to -the board first!). - -The easiest way to make this work it to add a few members to the driver: - - .platdata_auto_alloc_size = sizeof(struct dm_test_pdata), - .ofdata_to_platdata = testfdt_ofdata_to_platdata, - -The 'auto_alloc' feature allowed space for the platdata to be allocated -and zeroed before the driver's ofdata_to_platdata() method is called. The -ofdata_to_platdata() method, which the driver write supplies, should parse -the device tree node for this device and place it in dev->platdata. Thus -when the probe method is called later (to set up the device ready for use) -the platform data will be present. - -Note that both methods are optional. If you provide an ofdata_to_platdata -method then it will be called first (during activation). If you provide a -probe method it will be called next. See Driver Lifecycle below for more -details. - -If you don't want to have the platdata automatically allocated then you -can leave out platdata_auto_alloc_size. In this case you can use malloc -in your ofdata_to_platdata (or probe) method to allocate the required memory, -and you should free it in the remove method. - -The driver model tree is intended to mirror that of the device tree. The -root driver is at device tree offset 0 (the root node, '/'), and its -children are the children of the root node. - -In order for a device tree to be valid, the content must be correct with -respect to either device tree specification -(https://www.devicetree.org/specifications/) or the device tree bindings that -are found in the doc/device-tree-bindings directory. When not U-Boot specific -the bindings in this directory tend to come from the Linux Kernel. As such -certain design decisions may have been made already for us in terms of how -specific devices are described and bound. In most circumstances we wish to -retain compatibility without additional changes being made to the device tree -source files. - -Declaring Uclasses ------------------- - -The demo uclass is declared like this: - -U_BOOT_CLASS(demo) = { - .id = UCLASS_DEMO, -}; - -It is also possible to specify special methods for probe, etc. The uclass -numbering comes from include/dm/uclass.h. To add a new uclass, add to the -end of the enum there, then declare your uclass as above. - - -Device Sequence Numbers ------------------------ - -U-Boot numbers devices from 0 in many situations, such as in the command -line for I2C and SPI buses, and the device names for serial ports (serial0, -serial1, ...). Driver model supports this numbering and permits devices -to be locating by their 'sequence'. This numbering uniquely identifies a -device in its uclass, so no two devices within a particular uclass can have -the same sequence number. - -Sequence numbers start from 0 but gaps are permitted. For example, a board -may have I2C buses 1, 4, 5 but no 0, 2 or 3. The choice of how devices are -numbered is up to a particular board, and may be set by the SoC in some -cases. While it might be tempting to automatically renumber the devices -where there are gaps in the sequence, this can lead to confusion and is -not the way that U-Boot works. - -Each device can request a sequence number. If none is required then the -device will be automatically allocated the next available sequence number. - -To specify the sequence number in the device tree an alias is typically -used. Make sure that the uclass has the DM_UC_FLAG_SEQ_ALIAS flag set. - -aliases { - serial2 = "/serial@22230000"; -}; - -This indicates that in the uclass called "serial", the named node -("/serial@22230000") will be given sequence number 2. Any command or driver -which requests serial device 2 will obtain this device. - -More commonly you can use node references, which expand to the full path: - -aliases { - serial2 = &serial_2; -}; -... -serial_2: serial@22230000 { -... -}; - -The alias resolves to the same string in this case, but this version is -easier to read. - -Device sequence numbers are resolved when a device is probed. Before then -the sequence number is only a request which may or may not be honoured, -depending on what other devices have been probed. However the numbering is -entirely under the control of the board author so a conflict is generally -an error. - - -Bus Drivers ------------ - -A common use of driver model is to implement a bus, a device which provides -access to other devices. Example of buses include SPI and I2C. Typically -the bus provides some sort of transport or translation that makes it -possible to talk to the devices on the bus. - -Driver model provides some useful features to help with implementing buses. -Firstly, a bus can request that its children store some 'parent data' which -can be used to keep track of child state. Secondly, the bus can define -methods which are called when a child is probed or removed. This is similar -to the methods the uclass driver provides. Thirdly, per-child platform data -can be provided to specify things like the child's address on the bus. This -persists across child probe()/remove() cycles. - -For consistency and ease of implementation, the bus uclass can specify the -per-child platform data, so that it can be the same for all children of buses -in that uclass. There are also uclass methods which can be called when -children are bound and probed. - -Here an explanation of how a bus fits with a uclass may be useful. Consider -a USB bus with several devices attached to it, each from a different (made -up) uclass: - - xhci_usb (UCLASS_USB) - eth (UCLASS_ETHERNET) - camera (UCLASS_CAMERA) - flash (UCLASS_FLASH_STORAGE) - -Each of the devices is connected to a different address on the USB bus. -The bus device wants to store this address and some other information such -as the bus speed for each device. - -To achieve this, the bus device can use dev->parent_platdata in each of its -three children. This can be auto-allocated if the bus driver (or bus uclass) -has a non-zero value for per_child_platdata_auto_alloc_size. If not, then -the bus device or uclass can allocate the space itself before the child -device is probed. - -Also the bus driver can define the child_pre_probe() and child_post_remove() -methods to allow it to do some processing before the child is activated or -after it is deactivated. - -Similarly the bus uclass can define the child_post_bind() method to obtain -the per-child platform data from the device tree and set it up for the child. -The bus uclass can also provide a child_pre_probe() method. Very often it is -the bus uclass that controls these features, since it avoids each driver -having to do the same processing. Of course the driver can still tweak and -override these activities. - -Note that the information that controls this behaviour is in the bus's -driver, not the child's. In fact it is possible that child has no knowledge -that it is connected to a bus. The same child device may even be used on two -different bus types. As an example. the 'flash' device shown above may also -be connected on a SATA bus or standalone with no bus: - - xhci_usb (UCLASS_USB) - flash (UCLASS_FLASH_STORAGE) - parent data/methods defined by USB bus - - sata (UCLASS_SATA) - flash (UCLASS_FLASH_STORAGE) - parent data/methods defined by SATA bus - - flash (UCLASS_FLASH_STORAGE) - no parent data/methods (not on a bus) - -Above you can see that the driver for xhci_usb/sata controls the child's -bus methods. In the third example the device is not on a bus, and therefore -will not have these methods at all. Consider the case where the flash -device defines child methods. These would be used for *its* children, and -would be quite separate from the methods defined by the driver for the bus -that the flash device is connetced to. The act of attaching a device to a -parent device which is a bus, causes the device to start behaving like a -bus device, regardless of its own views on the matter. - -The uclass for the device can also contain data private to that uclass. -But note that each device on the bus may be a memeber of a different -uclass, and this data has nothing to do with the child data for each child -on the bus. It is the bus' uclass that controls the child with respect to -the bus. - - -Driver Lifecycle ----------------- - -Here are the stages that a device goes through in driver model. Note that all -methods mentioned here are optional - e.g. if there is no probe() method for -a device then it will not be called. A simple device may have very few -methods actually defined. - -1. Bind stage - -U-Boot discovers devices using one of these two methods: - - - Scan the U_BOOT_DEVICE() definitions. U-Boot looks up the name specified -by each, to find the appropriate U_BOOT_DRIVER() definition. In this case, -there is no path by which driver_data may be provided, but the U_BOOT_DEVICE() -may provide platdata. - - - Scan through the device tree definitions. U-Boot looks at top-level -nodes in the the device tree. It looks at the compatible string in each node -and uses the of_match table of the U_BOOT_DRIVER() structure to find the -right driver for each node. In this case, the of_match table may provide a -driver_data value, but platdata cannot be provided until later. - -For each device that is discovered, U-Boot then calls device_bind() to create a -new device, initializes various core fields of the device object such as name, -uclass & driver, initializes any optional fields of the device object that are -applicable such as of_offset, driver_data & platdata, and finally calls the -driver's bind() method if one is defined. - -At this point all the devices are known, and bound to their drivers. There -is a 'struct udevice' allocated for all devices. However, nothing has been -activated (except for the root device). Each bound device that was created -from a U_BOOT_DEVICE() declaration will hold the platdata pointer specified -in that declaration. For a bound device created from the device tree, -platdata will be NULL, but of_offset will be the offset of the device tree -node that caused the device to be created. The uclass is set correctly for -the device. - -The device's bind() method is permitted to perform simple actions, but -should not scan the device tree node, not initialise hardware, nor set up -structures or allocate memory. All of these tasks should be left for -the probe() method. - -Note that compared to Linux, U-Boot's driver model has a separate step of -probe/remove which is independent of bind/unbind. This is partly because in -U-Boot it may be expensive to probe devices and we don't want to do it until -they are needed, or perhaps until after relocation. - -2. Activation/probe - -When a device needs to be used, U-Boot activates it, by following these -steps (see device_probe()): - - a. If priv_auto_alloc_size is non-zero, then the device-private space - is allocated for the device and zeroed. It will be accessible as - dev->priv. The driver can put anything it likes in there, but should use - it for run-time information, not platform data (which should be static - and known before the device is probed). - - b. If platdata_auto_alloc_size is non-zero, then the platform data space - is allocated. This is only useful for device tree operation, since - otherwise you would have to specific the platform data in the - U_BOOT_DEVICE() declaration. The space is allocated for the device and - zeroed. It will be accessible as dev->platdata. - - c. If the device's uclass specifies a non-zero per_device_auto_alloc_size, - then this space is allocated and zeroed also. It is allocated for and - stored in the device, but it is uclass data. owned by the uclass driver. - It is possible for the device to access it. - - d. If the device's immediate parent specifies a per_child_auto_alloc_size - then this space is allocated. This is intended for use by the parent - device to keep track of things related to the child. For example a USB - flash stick attached to a USB host controller would likely use this - space. The controller can hold information about the USB state of each - of its children. - - e. All parent devices are probed. It is not possible to activate a device - unless its predecessors (all the way up to the root device) are activated. - This means (for example) that an I2C driver will require that its bus - be activated. - - f. The device's sequence number is assigned, either the requested one - (assuming no conflicts) or the next available one if there is a conflict - or nothing particular is requested. - - g. If the driver provides an ofdata_to_platdata() method, then this is - called to convert the device tree data into platform data. This should - do various calls like fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), ...) - to access the node and store the resulting information into dev->platdata. - After this point, the device works the same way whether it was bound - using a device tree node or U_BOOT_DEVICE() structure. In either case, - the platform data is now stored in the platdata structure. Typically you - will use the platdata_auto_alloc_size feature to specify the size of the - platform data structure, and U-Boot will automatically allocate and zero - it for you before entry to ofdata_to_platdata(). But if not, you can - allocate it yourself in ofdata_to_platdata(). Note that it is preferable - to do all the device tree decoding in ofdata_to_platdata() rather than - in probe(). (Apart from the ugliness of mixing configuration and run-time - data, one day it is possible that U-Boot will cache platform data for - devices which are regularly de/activated). - - h. The device's probe() method is called. This should do anything that - is required by the device to get it going. This could include checking - that the hardware is actually present, setting up clocks for the - hardware and setting up hardware registers to initial values. The code - in probe() can access: - - - platform data in dev->platdata (for configuration) - - private data in dev->priv (for run-time state) - - uclass data in dev->uclass_priv (for things the uclass stores - about this device) - - Note: If you don't use priv_auto_alloc_size then you will need to - allocate the priv space here yourself. The same applies also to - platdata_auto_alloc_size. Remember to free them in the remove() method. - - i. The device is marked 'activated' - - j. The uclass's post_probe() method is called, if one exists. This may - cause the uclass to do some housekeeping to record the device as - activated and 'known' by the uclass. - -3. Running stage - -The device is now activated and can be used. From now until it is removed -all of the above structures are accessible. The device appears in the -uclass's list of devices (so if the device is in UCLASS_GPIO it will appear -as a device in the GPIO uclass). This is the 'running' state of the device. - -4. Removal stage - -When the device is no-longer required, you can call device_remove() to -remove it. This performs the probe steps in reverse: - - a. The uclass's pre_remove() method is called, if one exists. This may - cause the uclass to do some housekeeping to record the device as - deactivated and no-longer 'known' by the uclass. - - b. All the device's children are removed. It is not permitted to have - an active child device with a non-active parent. This means that - device_remove() is called for all the children recursively at this point. - - c. The device's remove() method is called. At this stage nothing has been - deallocated so platform data, private data and the uclass data will all - still be present. This is where the hardware can be shut down. It is - intended that the device be completely inactive at this point, For U-Boot - to be sure that no hardware is running, it should be enough to remove - all devices. - - d. The device memory is freed (platform data, private data, uclass data, - parent data). - - Note: Because the platform data for a U_BOOT_DEVICE() is defined with a - static pointer, it is not de-allocated during the remove() method. For - a device instantiated using the device tree data, the platform data will - be dynamically allocated, and thus needs to be deallocated during the - remove() method, either: - - 1. if the platdata_auto_alloc_size is non-zero, the deallocation - happens automatically within the driver model core; or - - 2. when platdata_auto_alloc_size is 0, both the allocation (in probe() - or preferably ofdata_to_platdata()) and the deallocation in remove() - are the responsibility of the driver author. - - e. The device sequence number is set to -1, meaning that it no longer - has an allocated sequence. If the device is later reactivated and that - sequence number is still free, it may well receive the name sequence - number again. But from this point, the sequence number previously used - by this device will no longer exist (think of SPI bus 2 being removed - and bus 2 is no longer available for use). - - f. The device is marked inactive. Note that it is still bound, so the - device structure itself is not freed at this point. Should the device be - activated again, then the cycle starts again at step 2 above. - -5. Unbind stage - -The device is unbound. This is the step that actually destroys the device. -If a parent has children these will be destroyed first. After this point -the device does not exist and its memory has be deallocated. - - -Data Structures ---------------- - -Driver model uses a doubly-linked list as the basic data structure. Some -nodes have several lists running through them. Creating a more efficient -data structure might be worthwhile in some rare cases, once we understand -what the bottlenecks are. - - -Changes since v1 ----------------- - -For the record, this implementation uses a very similar approach to the -original patches, but makes at least the following changes: - -- Tried to aggressively remove boilerplate, so that for most drivers there -is little or no 'driver model' code to write. -- Moved some data from code into data structure - e.g. store a pointer to -the driver operations structure in the driver, rather than passing it -to the driver bind function. -- Rename some structures to make them more similar to Linux (struct udevice -instead of struct instance, struct platdata, etc.) -- Change the name 'core' to 'uclass', meaning U-Boot class. It seems that -this concept relates to a class of drivers (or a subsystem). We shouldn't -use 'class' since it is a C++ reserved word, so U-Boot class (uclass) seems -better than 'core'. -- Remove 'struct driver_instance' and just use a single 'struct udevice'. -This removes a level of indirection that doesn't seem necessary. -- Built in device tree support, to avoid the need for platdata -- Removed the concept of driver relocation, and just make it possible for -the new driver (created after relocation) to access the old driver data. -I feel that relocation is a very special case and will only apply to a few -drivers, many of which can/will just re-init anyway. So the overhead of -dealing with this might not be worth it. -- Implemented a GPIO system, trying to keep it simple - - -Pre-Relocation Support ----------------------- - -For pre-relocation we simply call the driver model init function. Only -drivers marked with DM_FLAG_PRE_RELOC or the device tree 'u-boot,dm-pre-reloc' -property are initialised prior to relocation. This helps to reduce the driver -model overhead. This flag applies to SPL and TPL as well, if device tree is -enabled (CONFIG_OF_CONTROL) there. - -Note when device tree is enabled, the device tree 'u-boot,dm-pre-reloc' -property can provide better control granularity on which device is bound -before relocation. While with DM_FLAG_PRE_RELOC flag of the driver all -devices with the same driver are bound, which requires allocation a large -amount of memory. When device tree is not used, DM_FLAG_PRE_RELOC is the -only way for statically declared devices via U_BOOT_DEVICE() to be bound -prior to relocation. - -It is possible to limit this to specific relocation steps, by using -the more specialized 'u-boot,dm-spl' and 'u-boot,dm-tpl' flags -in the device tree node. For U-Boot proper you can use 'u-boot,dm-pre-proper' -which means that it will be processed (and a driver bound) in U-Boot proper -prior to relocation, but will not be available in SPL or TPL. - -To reduce the size of SPL and TPL, only the nodes with pre-relocation properties -('u-boot,dm-pre-reloc', 'u-boot,dm-spl' or 'u-boot,dm-tpl') are keept in their -device trees (see README.SPL for details); the remaining nodes are always bound. - -Then post relocation we throw that away and re-init driver model again. -For drivers which require some sort of continuity between pre- and -post-relocation devices, we can provide access to the pre-relocation -device pointers, but this is not currently implemented (the root device -pointer is saved but not made available through the driver model API). - - -SPL Support ------------ - -Driver model can operate in SPL. Its efficient implementation and small code -size provide for a small overhead which is acceptable for all but the most -constrained systems. - -To enable driver model in SPL, define CONFIG_SPL_DM. You might want to -consider the following option also. See the main README for more details. - - - CONFIG_SYS_MALLOC_SIMPLE - - CONFIG_DM_WARN - - CONFIG_DM_DEVICE_REMOVE - - CONFIG_DM_STDIO - - -Enabling Driver Model ---------------------- - -Driver model is being brought into U-Boot gradually. As each subsystems gets -support, a uclass is created and a CONFIG to enable use of driver model for -that subsystem. - -For example CONFIG_DM_SERIAL enables driver model for serial. With that -defined, the old serial support is not enabled, and your serial driver must -conform to driver model. With that undefined, the old serial support is -enabled and driver model is not available for serial. This means that when -you convert a driver, you must either convert all its boards, or provide for -the driver to be compiled both with and without driver model (generally this -is not very hard). - -See the main README for full details of the available driver model CONFIG -options. - - -Things to punt for later ------------------------- - -Uclasses are statically numbered at compile time. It would be possible to -change this to dynamic numbering, but then we would require some sort of -lookup service, perhaps searching by name. This is slightly less efficient -so has been left out for now. One small advantage of dynamic numbering might -be fewer merge conflicts in uclass-id.h. - - -Simon Glass -sjg@chromium.org -April 2013 -Updated 7-May-13 -Updated 14-Jun-13 -Updated 18-Oct-13 -Updated 5-Nov-13 diff --git a/doc/driver-model/design.rst b/doc/driver-model/design.rst new file mode 100644 index 0000000000..8fd28c0f52 --- /dev/null +++ b/doc/driver-model/design.rst @@ -0,0 +1,939 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Simon Glass + +Design Details +============== + +This README contains high-level information about driver model, a unified +way of declaring and accessing drivers in U-Boot. The original work was done +by: + + * Marek Vasut + * Pavel Herrmann + * Viktor Křivák + * Tomas Hlavacek + +This has been both simplified and extended into the current implementation +by: + + * Simon Glass + + +Terminology +----------- + +Uclass + a group of devices which operate in the same way. A uclass provides + a way of accessing individual devices within the group, but always + using the same interface. For example a GPIO uclass provides + operations for get/set value. An I2C uclass may have 10 I2C ports, + 4 with one driver, and 6 with another. + +Driver + some code which talks to a peripheral and presents a higher-level + interface to it. + +Device + an instance of a driver, tied to a particular port or peripheral. + + +How to try it +------------- + +Build U-Boot sandbox and run it:: + + make sandbox_defconfig + make + ./u-boot -d u-boot.dtb + + (type 'reset' to exit U-Boot) + + +There is a uclass called 'demo'. This uclass handles +saying hello, and reporting its status. There are two drivers in this +uclass: + + - simple: Just prints a message for hello, doesn't implement status + - shape: Prints shapes and reports number of characters printed as status + +The demo class is pretty simple, but not trivial. The intention is that it +can be used for testing, so it will implement all driver model features and +provide good code coverage of them. It does have multiple drivers, it +handles parameter data and platdata (data which tells the driver how +to operate on a particular platform) and it uses private driver data. + +To try it, see the example session below:: + + =>demo hello 1 + Hello '@' from 07981110: red 4 + =>demo status 2 + Status: 0 + =>demo hello 2 + g + r@ + e@@ + e@@@ + n@@@@ + g@@@@@ + =>demo status 2 + Status: 21 + =>demo hello 4 ^ + y^^^ + e^^^^^ + l^^^^^^^ + l^^^^^^^ + o^^^^^ + w^^^ + =>demo status 4 + Status: 36 + => + + +Running the tests +----------------- + +The intent with driver model is that the core portion has 100% test coverage +in sandbox, and every uclass has its own test. As a move towards this, tests +are provided in test/dm. To run them, try:: + + ./test/py/test.py --bd sandbox --build -k ut_dm -v + +You should see something like this:: + + (venv)$ ./test/py/test.py --bd sandbox --build -k ut_dm -v + +make O=/root/u-boot/build-sandbox -s sandbox_defconfig + +make O=/root/u-boot/build-sandbox -s -j8 + ============================= test session starts ============================== + platform linux2 -- Python 2.7.5, pytest-2.9.0, py-1.4.31, pluggy-0.3.1 -- /root/u-boot/venv/bin/python + cachedir: .cache + rootdir: /root/u-boot, inifile: + collected 199 items + + test/py/tests/test_ut.py::test_ut_dm_init PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_bind] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_multi_channel_conversion] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_multi_channel_shot] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_single_channel_conversion] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_single_channel_shot] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_supply] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_adc_wrong_channel_selection] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_autobind] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_autobind_uclass_pdata_alloc] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_autobind_uclass_pdata_valid] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_autoprobe] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_post_bind] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_post_bind_uclass] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_child_pre_probe_uclass] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_children] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_children_funcs] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_children_iterators] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_data] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_data_uclass] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_ops] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_platdata] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_bus_parent_platdata_uclass] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_children] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_clk_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_clk_periph] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_device_get_uclass_id] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_eth] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_eth_act] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_eth_alias] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_eth_prime] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_eth_rotate] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_fdt] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_fdt_offset] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_fdt_pre_reloc] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_fdt_uclass_seq] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_gpio] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_gpio_anon] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_gpio_copy] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_gpio_leak] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_gpio_phandles] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_gpio_requestf] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_bytewise] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_find] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_offset] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_offset_len] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_probe_empty] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_read_write] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_i2c_speed] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_leak] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_led_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_led_gpio] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_led_label] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_lifecycle] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_mmc_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_net_retry] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_operations] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_ordering] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_pci_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_pci_busnum] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_pci_swapcase] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_platdata] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_pmic_get] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_pmic_io] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_autoset] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_autoset_list] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_get] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_current] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_enable] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_mode] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_power_regulator_set_get_voltage] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_pre_reloc] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_ram_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_regmap_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_regmap_syscon] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_remoteproc_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_remove] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_reset_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_reset_walk] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_rtc_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_rtc_dual] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_rtc_reset] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_rtc_set_get] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_spi_find] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_spi_flash] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_spi_xfer] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_syscon_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_syscon_by_driver_data] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_timer_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_uclass] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_uclass_before_ready] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_find] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_find_by_name] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_get] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_uclass_devices_get_by_name] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_flash] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_keyb] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_multi] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_remove] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree_remove] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_usb_tree_reorder] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_base] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_bmp] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_bmp_comp] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_chars] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_context] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation1] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation2] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_rotation3] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_text] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype_bs] PASSED + test/py/tests/test_ut.py::test_ut[ut_dm_video_truetype_scroll] PASSED + + ======================= 84 tests deselected by '-kut_dm' ======================= + ================== 115 passed, 84 deselected in 3.77 seconds =================== + +What is going on? +----------------- + +Let's start at the top. The demo command is in common/cmd_demo.c. It does +the usual command processing and then: + +.. code-block:: c + + struct udevice *demo_dev; + + ret = uclass_get_device(UCLASS_DEMO, devnum, &demo_dev); + +UCLASS_DEMO means the class of devices which implement 'demo'. Other +classes might be MMC, or GPIO, hashing or serial. The idea is that the +devices in the class all share a particular way of working. The class +presents a unified view of all these devices to U-Boot. + +This function looks up a device for the demo uclass. Given a device +number we can find the device because all devices have registered with +the UCLASS_DEMO uclass. + +The device is automatically activated ready for use by uclass_get_device(). + +Now that we have the device we can do things like: + +.. code-block:: c + + return demo_hello(demo_dev, ch); + +This function is in the demo uclass. It takes care of calling the 'hello' +method of the relevant driver. Bearing in mind that there are two drivers, +this particular device may use one or other of them. + +The code for demo_hello() is in drivers/demo/demo-uclass.c: + +.. code-block:: c + + int demo_hello(struct udevice *dev, int ch) + { + const struct demo_ops *ops = device_get_ops(dev); + + if (!ops->hello) + return -ENOSYS; + + return ops->hello(dev, ch); + } + +As you can see it just calls the relevant driver method. One of these is +in drivers/demo/demo-simple.c: + +.. code-block:: c + + static int simple_hello(struct udevice *dev, int ch) + { + const struct dm_demo_pdata *pdata = dev_get_platdata(dev); + + printf("Hello from %08x: %s %d\n", map_to_sysmem(dev), + pdata->colour, pdata->sides); + + return 0; + } + + +So that is a trip from top (command execution) to bottom (driver action) +but it leaves a lot of topics to address. + + +Declaring Drivers +----------------- + +A driver declaration looks something like this (see +drivers/demo/demo-shape.c): + +.. code-block:: c + + static const struct demo_ops shape_ops = { + .hello = shape_hello, + .status = shape_status, + }; + + U_BOOT_DRIVER(demo_shape_drv) = { + .name = "demo_shape_drv", + .id = UCLASS_DEMO, + .ops = &shape_ops, + .priv_data_size = sizeof(struct shape_data), + }; + + +This driver has two methods (hello and status) and requires a bit of +private data (accessible through dev_get_priv(dev) once the driver has +been probed). It is a member of UCLASS_DEMO so will register itself +there. + +In U_BOOT_DRIVER it is also possible to specify special methods for bind +and unbind, and these are called at appropriate times. For many drivers +it is hoped that only 'probe' and 'remove' will be needed. + +The U_BOOT_DRIVER macro creates a data structure accessible from C, +so driver model can find the drivers that are available. + +The methods a device can provide are documented in the device.h header. +Briefly, they are: + + * bind - make the driver model aware of a device (bind it to its driver) + * unbind - make the driver model forget the device + * ofdata_to_platdata - convert device tree data to platdata - see later + * probe - make a device ready for use + * remove - remove a device so it cannot be used until probed again + +The sequence to get a device to work is bind, ofdata_to_platdata (if using +device tree) and probe. + + +Platform Data +------------- + +Note: platform data is the old way of doing things. It is +basically a C structure which is passed to drivers to tell them about +platform-specific settings like the address of its registers, bus +speed, etc. Device tree is now the preferred way of handling this. +Unless you have a good reason not to use device tree (the main one +being you need serial support in SPL and don't have enough SRAM for +the cut-down device tree and libfdt libraries) you should stay away +from platform data. + +Platform data is like Linux platform data, if you are familiar with that. +It provides the board-specific information to start up a device. + +Why is this information not just stored in the device driver itself? The +idea is that the device driver is generic, and can in principle operate on +any board that has that type of device. For example, with modern +highly-complex SoCs it is common for the IP to come from an IP vendor, and +therefore (for example) the MMC controller may be the same on chips from +different vendors. It makes no sense to write independent drivers for the +MMC controller on each vendor's SoC, when they are all almost the same. +Similarly, we may have 6 UARTs in an SoC, all of which are mostly the same, +but lie at different addresses in the address space. + +Using the UART example, we have a single driver and it is instantiated 6 +times by supplying 6 lots of platform data. Each lot of platform data +gives the driver name and a pointer to a structure containing information +about this instance - e.g. the address of the register space. It may be that +one of the UARTS supports RS-485 operation - this can be added as a flag in +the platform data, which is set for this one port and clear for the rest. + +Think of your driver as a generic piece of code which knows how to talk to +a device, but needs to know where it is, any variant/option information and +so on. Platform data provides this link between the generic piece of code +and the specific way it is bound on a particular board. + +Examples of platform data include: + + - The base address of the IP block's register space + - Configuration options, like: + - the SPI polarity and maximum speed for a SPI controller + - the I2C speed to use for an I2C device + - the number of GPIOs available in a GPIO device + +Where does the platform data come from? It is either held in a structure +which is compiled into U-Boot, or it can be parsed from the Device Tree +(see 'Device Tree' below). + +For an example of how it can be compiled in, see demo-pdata.c which +sets up a table of driver names and their associated platform data. +The data can be interpreted by the drivers however they like - it is +basically a communication scheme between the board-specific code and +the generic drivers, which are intended to work on any board. + +Drivers can access their data via dev->info->platdata. Here is +the declaration for the platform data, which would normally appear +in the board file. + +.. code-block:: c + + static const struct dm_demo_cdata red_square = { + .colour = "red", + .sides = 4. + }; + + static const struct driver_info info[] = { + { + .name = "demo_shape_drv", + .platdata = &red_square, + }, + }; + + demo1 = driver_bind(root, &info[0]); + + +Device Tree +----------- + +While platdata is useful, a more flexible way of providing device data is +by using device tree. In U-Boot you should use this where possible. Avoid +sending patches which make use of the U_BOOT_DEVICE() macro unless strictly +necessary. + +With device tree we replace the above code with the following device tree +fragment: + +.. code-block:: c + + red-square { + compatible = "demo-shape"; + colour = "red"; + sides = <4>; + }; + +This means that instead of having lots of U_BOOT_DEVICE() declarations in +the board file, we put these in the device tree. This approach allows a lot +more generality, since the same board file can support many types of boards +(e,g. with the same SoC) just by using different device trees. An added +benefit is that the Linux device tree can be used, thus further simplifying +the task of board-bring up either for U-Boot or Linux devs (whoever gets to +the board first!). + +The easiest way to make this work it to add a few members to the driver: + +.. code-block:: c + + .platdata_auto_alloc_size = sizeof(struct dm_test_pdata), + .ofdata_to_platdata = testfdt_ofdata_to_platdata, + +The 'auto_alloc' feature allowed space for the platdata to be allocated +and zeroed before the driver's ofdata_to_platdata() method is called. The +ofdata_to_platdata() method, which the driver write supplies, should parse +the device tree node for this device and place it in dev->platdata. Thus +when the probe method is called later (to set up the device ready for use) +the platform data will be present. + +Note that both methods are optional. If you provide an ofdata_to_platdata +method then it will be called first (during activation). If you provide a +probe method it will be called next. See Driver Lifecycle below for more +details. + +If you don't want to have the platdata automatically allocated then you +can leave out platdata_auto_alloc_size. In this case you can use malloc +in your ofdata_to_platdata (or probe) method to allocate the required memory, +and you should free it in the remove method. + +The driver model tree is intended to mirror that of the device tree. The +root driver is at device tree offset 0 (the root node, '/'), and its +children are the children of the root node. + +In order for a device tree to be valid, the content must be correct with +respect to either device tree specification +(https://www.devicetree.org/specifications/) or the device tree bindings that +are found in the doc/device-tree-bindings directory. When not U-Boot specific +the bindings in this directory tend to come from the Linux Kernel. As such +certain design decisions may have been made already for us in terms of how +specific devices are described and bound. In most circumstances we wish to +retain compatibility without additional changes being made to the device tree +source files. + +Declaring Uclasses +------------------ + +The demo uclass is declared like this: + +.. code-block:: c + + U_BOOT_CLASS(demo) = { + .id = UCLASS_DEMO, + }; + +It is also possible to specify special methods for probe, etc. The uclass +numbering comes from include/dm/uclass.h. To add a new uclass, add to the +end of the enum there, then declare your uclass as above. + + +Device Sequence Numbers +----------------------- + +U-Boot numbers devices from 0 in many situations, such as in the command +line for I2C and SPI buses, and the device names for serial ports (serial0, +serial1, ...). Driver model supports this numbering and permits devices +to be locating by their 'sequence'. This numbering uniquely identifies a +device in its uclass, so no two devices within a particular uclass can have +the same sequence number. + +Sequence numbers start from 0 but gaps are permitted. For example, a board +may have I2C buses 1, 4, 5 but no 0, 2 or 3. The choice of how devices are +numbered is up to a particular board, and may be set by the SoC in some +cases. While it might be tempting to automatically renumber the devices +where there are gaps in the sequence, this can lead to confusion and is +not the way that U-Boot works. + +Each device can request a sequence number. If none is required then the +device will be automatically allocated the next available sequence number. + +To specify the sequence number in the device tree an alias is typically +used. Make sure that the uclass has the DM_UC_FLAG_SEQ_ALIAS flag set. + +.. code-block:: none + + aliases { + serial2 = "/serial@22230000"; + }; + +This indicates that in the uclass called "serial", the named node +("/serial@22230000") will be given sequence number 2. Any command or driver +which requests serial device 2 will obtain this device. + +More commonly you can use node references, which expand to the full path: + +.. code-block:: none + + aliases { + serial2 = &serial_2; + }; + ... + serial_2: serial@22230000 { + ... + }; + +The alias resolves to the same string in this case, but this version is +easier to read. + +Device sequence numbers are resolved when a device is probed. Before then +the sequence number is only a request which may or may not be honoured, +depending on what other devices have been probed. However the numbering is +entirely under the control of the board author so a conflict is generally +an error. + + +Bus Drivers +----------- + +A common use of driver model is to implement a bus, a device which provides +access to other devices. Example of buses include SPI and I2C. Typically +the bus provides some sort of transport or translation that makes it +possible to talk to the devices on the bus. + +Driver model provides some useful features to help with implementing buses. +Firstly, a bus can request that its children store some 'parent data' which +can be used to keep track of child state. Secondly, the bus can define +methods which are called when a child is probed or removed. This is similar +to the methods the uclass driver provides. Thirdly, per-child platform data +can be provided to specify things like the child's address on the bus. This +persists across child probe()/remove() cycles. + +For consistency and ease of implementation, the bus uclass can specify the +per-child platform data, so that it can be the same for all children of buses +in that uclass. There are also uclass methods which can be called when +children are bound and probed. + +Here an explanation of how a bus fits with a uclass may be useful. Consider +a USB bus with several devices attached to it, each from a different (made +up) uclass:: + + xhci_usb (UCLASS_USB) + eth (UCLASS_ETHERNET) + camera (UCLASS_CAMERA) + flash (UCLASS_FLASH_STORAGE) + +Each of the devices is connected to a different address on the USB bus. +The bus device wants to store this address and some other information such +as the bus speed for each device. + +To achieve this, the bus device can use dev->parent_platdata in each of its +three children. This can be auto-allocated if the bus driver (or bus uclass) +has a non-zero value for per_child_platdata_auto_alloc_size. If not, then +the bus device or uclass can allocate the space itself before the child +device is probed. + +Also the bus driver can define the child_pre_probe() and child_post_remove() +methods to allow it to do some processing before the child is activated or +after it is deactivated. + +Similarly the bus uclass can define the child_post_bind() method to obtain +the per-child platform data from the device tree and set it up for the child. +The bus uclass can also provide a child_pre_probe() method. Very often it is +the bus uclass that controls these features, since it avoids each driver +having to do the same processing. Of course the driver can still tweak and +override these activities. + +Note that the information that controls this behaviour is in the bus's +driver, not the child's. In fact it is possible that child has no knowledge +that it is connected to a bus. The same child device may even be used on two +different bus types. As an example. the 'flash' device shown above may also +be connected on a SATA bus or standalone with no bus:: + + xhci_usb (UCLASS_USB) + flash (UCLASS_FLASH_STORAGE) - parent data/methods defined by USB bus + + sata (UCLASS_SATA) + flash (UCLASS_FLASH_STORAGE) - parent data/methods defined by SATA bus + + flash (UCLASS_FLASH_STORAGE) - no parent data/methods (not on a bus) + +Above you can see that the driver for xhci_usb/sata controls the child's +bus methods. In the third example the device is not on a bus, and therefore +will not have these methods at all. Consider the case where the flash +device defines child methods. These would be used for *its* children, and +would be quite separate from the methods defined by the driver for the bus +that the flash device is connetced to. The act of attaching a device to a +parent device which is a bus, causes the device to start behaving like a +bus device, regardless of its own views on the matter. + +The uclass for the device can also contain data private to that uclass. +But note that each device on the bus may be a memeber of a different +uclass, and this data has nothing to do with the child data for each child +on the bus. It is the bus' uclass that controls the child with respect to +the bus. + + +Driver Lifecycle +---------------- + +Here are the stages that a device goes through in driver model. Note that all +methods mentioned here are optional - e.g. if there is no probe() method for +a device then it will not be called. A simple device may have very few +methods actually defined. + +Bind stage +^^^^^^^^^^ + +U-Boot discovers devices using one of these two methods: + +- Scan the U_BOOT_DEVICE() definitions. U-Boot looks up the name specified + by each, to find the appropriate U_BOOT_DRIVER() definition. In this case, + there is no path by which driver_data may be provided, but the U_BOOT_DEVICE() + may provide platdata. + +- Scan through the device tree definitions. U-Boot looks at top-level + nodes in the the device tree. It looks at the compatible string in each node + and uses the of_match table of the U_BOOT_DRIVER() structure to find the + right driver for each node. In this case, the of_match table may provide a + driver_data value, but platdata cannot be provided until later. + +For each device that is discovered, U-Boot then calls device_bind() to create a +new device, initializes various core fields of the device object such as name, +uclass & driver, initializes any optional fields of the device object that are +applicable such as of_offset, driver_data & platdata, and finally calls the +driver's bind() method if one is defined. + +At this point all the devices are known, and bound to their drivers. There +is a 'struct udevice' allocated for all devices. However, nothing has been +activated (except for the root device). Each bound device that was created +from a U_BOOT_DEVICE() declaration will hold the platdata pointer specified +in that declaration. For a bound device created from the device tree, +platdata will be NULL, but of_offset will be the offset of the device tree +node that caused the device to be created. The uclass is set correctly for +the device. + +The device's bind() method is permitted to perform simple actions, but +should not scan the device tree node, not initialise hardware, nor set up +structures or allocate memory. All of these tasks should be left for +the probe() method. + +Note that compared to Linux, U-Boot's driver model has a separate step of +probe/remove which is independent of bind/unbind. This is partly because in +U-Boot it may be expensive to probe devices and we don't want to do it until +they are needed, or perhaps until after relocation. + +Activation/probe +^^^^^^^^^^^^^^^^ + +When a device needs to be used, U-Boot activates it, by following these +steps (see device_probe()): + + 1. If priv_auto_alloc_size is non-zero, then the device-private space + is allocated for the device and zeroed. It will be accessible as + dev->priv. The driver can put anything it likes in there, but should use + it for run-time information, not platform data (which should be static + and known before the device is probed). + + 2. If platdata_auto_alloc_size is non-zero, then the platform data space + is allocated. This is only useful for device tree operation, since + otherwise you would have to specific the platform data in the + U_BOOT_DEVICE() declaration. The space is allocated for the device and + zeroed. It will be accessible as dev->platdata. + + 3. If the device's uclass specifies a non-zero per_device_auto_alloc_size, + then this space is allocated and zeroed also. It is allocated for and + stored in the device, but it is uclass data. owned by the uclass driver. + It is possible for the device to access it. + + 4. If the device's immediate parent specifies a per_child_auto_alloc_size + then this space is allocated. This is intended for use by the parent + device to keep track of things related to the child. For example a USB + flash stick attached to a USB host controller would likely use this + space. The controller can hold information about the USB state of each + of its children. + + 5. All parent devices are probed. It is not possible to activate a device + unless its predecessors (all the way up to the root device) are activated. + This means (for example) that an I2C driver will require that its bus + be activated. + + 6. The device's sequence number is assigned, either the requested one + (assuming no conflicts) or the next available one if there is a conflict + or nothing particular is requested. + + 7. If the driver provides an ofdata_to_platdata() method, then this is + called to convert the device tree data into platform data. This should + do various calls like fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), ...) + to access the node and store the resulting information into dev->platdata. + After this point, the device works the same way whether it was bound + using a device tree node or U_BOOT_DEVICE() structure. In either case, + the platform data is now stored in the platdata structure. Typically you + will use the platdata_auto_alloc_size feature to specify the size of the + platform data structure, and U-Boot will automatically allocate and zero + it for you before entry to ofdata_to_platdata(). But if not, you can + allocate it yourself in ofdata_to_platdata(). Note that it is preferable + to do all the device tree decoding in ofdata_to_platdata() rather than + in probe(). (Apart from the ugliness of mixing configuration and run-time + data, one day it is possible that U-Boot will cache platform data for + devices which are regularly de/activated). + + 8. The device's probe() method is called. This should do anything that + is required by the device to get it going. This could include checking + that the hardware is actually present, setting up clocks for the + hardware and setting up hardware registers to initial values. The code + in probe() can access: + + - platform data in dev->platdata (for configuration) + - private data in dev->priv (for run-time state) + - uclass data in dev->uclass_priv (for things the uclass stores + about this device) + + Note: If you don't use priv_auto_alloc_size then you will need to + allocate the priv space here yourself. The same applies also to + platdata_auto_alloc_size. Remember to free them in the remove() method. + + 9. The device is marked 'activated' + + 10. The uclass's post_probe() method is called, if one exists. This may + cause the uclass to do some housekeeping to record the device as + activated and 'known' by the uclass. + +Running stage +^^^^^^^^^^^^^ + +The device is now activated and can be used. From now until it is removed +all of the above structures are accessible. The device appears in the +uclass's list of devices (so if the device is in UCLASS_GPIO it will appear +as a device in the GPIO uclass). This is the 'running' state of the device. + +Removal stage +^^^^^^^^^^^^^ + +When the device is no-longer required, you can call device_remove() to +remove it. This performs the probe steps in reverse: + + 1. The uclass's pre_remove() method is called, if one exists. This may + cause the uclass to do some housekeeping to record the device as + deactivated and no-longer 'known' by the uclass. + + 2. All the device's children are removed. It is not permitted to have + an active child device with a non-active parent. This means that + device_remove() is called for all the children recursively at this point. + + 3. The device's remove() method is called. At this stage nothing has been + deallocated so platform data, private data and the uclass data will all + still be present. This is where the hardware can be shut down. It is + intended that the device be completely inactive at this point, For U-Boot + to be sure that no hardware is running, it should be enough to remove + all devices. + + 4. The device memory is freed (platform data, private data, uclass data, + parent data). + + Note: Because the platform data for a U_BOOT_DEVICE() is defined with a + static pointer, it is not de-allocated during the remove() method. For + a device instantiated using the device tree data, the platform data will + be dynamically allocated, and thus needs to be deallocated during the + remove() method, either: + + - if the platdata_auto_alloc_size is non-zero, the deallocation + happens automatically within the driver model core; or + + - when platdata_auto_alloc_size is 0, both the allocation (in probe() + or preferably ofdata_to_platdata()) and the deallocation in remove() + are the responsibility of the driver author. + + 5. The device sequence number is set to -1, meaning that it no longer + has an allocated sequence. If the device is later reactivated and that + sequence number is still free, it may well receive the name sequence + number again. But from this point, the sequence number previously used + by this device will no longer exist (think of SPI bus 2 being removed + and bus 2 is no longer available for use). + + 6. The device is marked inactive. Note that it is still bound, so the + device structure itself is not freed at this point. Should the device be + activated again, then the cycle starts again at step 2 above. + +Unbind stage +^^^^^^^^^^^^ + +The device is unbound. This is the step that actually destroys the device. +If a parent has children these will be destroyed first. After this point +the device does not exist and its memory has be deallocated. + + +Data Structures +--------------- + +Driver model uses a doubly-linked list as the basic data structure. Some +nodes have several lists running through them. Creating a more efficient +data structure might be worthwhile in some rare cases, once we understand +what the bottlenecks are. + + +Changes since v1 +---------------- + +For the record, this implementation uses a very similar approach to the +original patches, but makes at least the following changes: + +- Tried to aggressively remove boilerplate, so that for most drivers there + is little or no 'driver model' code to write. +- Moved some data from code into data structure - e.g. store a pointer to + the driver operations structure in the driver, rather than passing it + to the driver bind function. +- Rename some structures to make them more similar to Linux (struct udevice + instead of struct instance, struct platdata, etc.) +- Change the name 'core' to 'uclass', meaning U-Boot class. It seems that + this concept relates to a class of drivers (or a subsystem). We shouldn't + use 'class' since it is a C++ reserved word, so U-Boot class (uclass) seems + better than 'core'. +- Remove 'struct driver_instance' and just use a single 'struct udevice'. + This removes a level of indirection that doesn't seem necessary. +- Built in device tree support, to avoid the need for platdata +- Removed the concept of driver relocation, and just make it possible for + the new driver (created after relocation) to access the old driver data. + I feel that relocation is a very special case and will only apply to a few + drivers, many of which can/will just re-init anyway. So the overhead of + dealing with this might not be worth it. +- Implemented a GPIO system, trying to keep it simple + + +Pre-Relocation Support +---------------------- + +For pre-relocation we simply call the driver model init function. Only +drivers marked with DM_FLAG_PRE_RELOC or the device tree 'u-boot,dm-pre-reloc' +property are initialised prior to relocation. This helps to reduce the driver +model overhead. This flag applies to SPL and TPL as well, if device tree is +enabled (CONFIG_OF_CONTROL) there. + +Note when device tree is enabled, the device tree 'u-boot,dm-pre-reloc' +property can provide better control granularity on which device is bound +before relocation. While with DM_FLAG_PRE_RELOC flag of the driver all +devices with the same driver are bound, which requires allocation a large +amount of memory. When device tree is not used, DM_FLAG_PRE_RELOC is the +only way for statically declared devices via U_BOOT_DEVICE() to be bound +prior to relocation. + +It is possible to limit this to specific relocation steps, by using +the more specialized 'u-boot,dm-spl' and 'u-boot,dm-tpl' flags +in the device tree node. For U-Boot proper you can use 'u-boot,dm-pre-proper' +which means that it will be processed (and a driver bound) in U-Boot proper +prior to relocation, but will not be available in SPL or TPL. + +To reduce the size of SPL and TPL, only the nodes with pre-relocation properties +('u-boot,dm-pre-reloc', 'u-boot,dm-spl' or 'u-boot,dm-tpl') are keept in their +device trees (see README.SPL for details); the remaining nodes are always bound. + +Then post relocation we throw that away and re-init driver model again. +For drivers which require some sort of continuity between pre- and +post-relocation devices, we can provide access to the pre-relocation +device pointers, but this is not currently implemented (the root device +pointer is saved but not made available through the driver model API). + + +SPL Support +----------- + +Driver model can operate in SPL. Its efficient implementation and small code +size provide for a small overhead which is acceptable for all but the most +constrained systems. + +To enable driver model in SPL, define CONFIG_SPL_DM. You might want to +consider the following option also. See the main README for more details. + + - CONFIG_SYS_MALLOC_SIMPLE + - CONFIG_DM_WARN + - CONFIG_DM_DEVICE_REMOVE + - CONFIG_DM_STDIO + + +Enabling Driver Model +--------------------- + +Driver model is being brought into U-Boot gradually. As each subsystems gets +support, a uclass is created and a CONFIG to enable use of driver model for +that subsystem. + +For example CONFIG_DM_SERIAL enables driver model for serial. With that +defined, the old serial support is not enabled, and your serial driver must +conform to driver model. With that undefined, the old serial support is +enabled and driver model is not available for serial. This means that when +you convert a driver, you must either convert all its boards, or provide for +the driver to be compiled both with and without driver model (generally this +is not very hard). + +See the main README for full details of the available driver model CONFIG +options. + + +Things to punt for later +------------------------ + +Uclasses are statically numbered at compile time. It would be possible to +change this to dynamic numbering, but then we would require some sort of +lookup service, perhaps searching by name. This is slightly less efficient +so has been left out for now. One small advantage of dynamic numbering might +be fewer merge conflicts in uclass-id.h. diff --git a/doc/driver-model/index.rst b/doc/driver-model/index.rst index 0f74619991..96fbd7213a 100644 --- a/doc/driver-model/index.rst +++ b/doc/driver-model/index.rst @@ -5,3 +5,5 @@ Driver Model .. toctree:: :maxdepth: 2 + + design -- cgit v1.2.3