From aba0e6510f8fb4166179cc6d486abd6bb6b7b7e8 Mon Sep 17 00:00:00 2001 From: Ashok Reddy Soma Date: Fri, 30 Sep 2022 03:25:47 -0600 Subject: mmc: zynq_sdhci: Read power-domains id from DT and use Firmware calls need node_id which is basically "power-domains" id. At present static values are used based on the "device_id" property of dt. Instead of this, read "power-domains" id from dt and use it. Add a element called node_id in priv structure and read it from dt. Replace static node_id with this priv->node_id across the driver. Since "device_id" is not used anywhere else simply remove it. Signed-off-by: Ashok Reddy Soma Link: https://lore.kernel.org/r/20220930092548.18453-3-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek --- drivers/mmc/zynq_sdhci.c | 39 ++++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 19 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 3a4194452c..7dcf6ad842 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -61,7 +61,7 @@ struct arasan_sdhci_plat { struct arasan_sdhci_priv { struct sdhci_host *host; struct arasan_sdhci_clk_data clk_data; - u8 deviceid; + u32 node_id; u8 bank; u8 no_1p8; struct reset_ctl_bulk resets; @@ -250,7 +250,6 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) struct sdhci_host *host; struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev); char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT; - u8 node_id = priv->deviceid ? NODE_SD_1 : NODE_SD_0; dev_dbg(mmc->dev, "%s\n", __func__); @@ -262,7 +261,7 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) mdelay(1); - arasan_zynqmp_dll_reset(host, node_id); + arasan_zynqmp_dll_reset(host, priv->node_id); sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); @@ -308,7 +307,7 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) } udelay(1); - arasan_zynqmp_dll_reset(host, node_id); + arasan_zynqmp_dll_reset(host, priv->node_id); /* Enable only interrupts served by the SD controller */ sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK, @@ -334,7 +333,6 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host, struct mmc *mmc = (struct mmc *)host->mmc; struct udevice *dev = mmc->dev; struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev); - u8 node_id = priv->deviceid ? NODE_SD_1 : NODE_SD_0; u8 tap_delay, tap_max = 0; int timing = mode2timing[mmc->selected_mode]; int ret; @@ -374,14 +372,14 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host, tap_delay &= SDHCI_ARASAN_OTAPDLY_SEL_MASK; /* Set the Clock Phase */ - ret = arasan_zynqmp_set_out_tapdelay(node_id, tap_delay); + ret = arasan_zynqmp_set_out_tapdelay(priv->node_id, tap_delay); if (ret) { dev_err(dev, "Error setting output Tap Delay\n"); return ret; } /* Release DLL Reset */ - ret = zynqmp_dll_reset(node_id, PM_DLL_RESET_RELEASE); + ret = zynqmp_dll_reset(priv->node_id, PM_DLL_RESET_RELEASE); if (ret) { dev_err(dev, "dll_reset release failed with err: %d\n", ret); return ret; @@ -405,7 +403,6 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, struct mmc *mmc = (struct mmc *)host->mmc; struct udevice *dev = mmc->dev; struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev); - u8 node_id = priv->deviceid ? NODE_SD_1 : NODE_SD_0; u8 tap_delay, tap_max = 0; int timing = mode2timing[mmc->selected_mode]; int ret; @@ -419,7 +416,7 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, return 0; /* Assert DLL Reset */ - ret = zynqmp_dll_reset(node_id, PM_DLL_RESET_ASSERT); + ret = zynqmp_dll_reset(priv->node_id, PM_DLL_RESET_ASSERT); if (ret) { dev_err(dev, "dll_reset assert failed with err: %d\n", ret); return ret; @@ -451,7 +448,7 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, /* Limit input tap_delay value to 8 bits */ tap_delay &= SDHCI_ARASAN_ITAPDLY_SEL_MASK; - ret = arasan_zynqmp_set_in_tapdelay(node_id, tap_delay); + ret = arasan_zynqmp_set_in_tapdelay(priv->node_id, tap_delay); if (ret) { dev_err(dev, "Error setting Input Tap Delay\n"); return ret; @@ -717,14 +714,14 @@ static int sdhci_zynqmp_set_dynamic_config(struct arasan_sdhci_priv *priv, struct udevice *dev) { int ret; - u32 node_id = priv->deviceid ? NODE_SD_1 : NODE_SD_0; struct clk clk; unsigned long clock, mhz; - ret = xilinx_pm_request(PM_REQUEST_NODE, node_id, ZYNQMP_PM_CAPABILITY_ACCESS, - ZYNQMP_PM_MAX_QOS, ZYNQMP_PM_REQUEST_ACK_NO, NULL); + ret = xilinx_pm_request(PM_REQUEST_NODE, priv->node_id, + ZYNQMP_PM_CAPABILITY_ACCESS, ZYNQMP_PM_MAX_QOS, + ZYNQMP_PM_REQUEST_ACK_NO, NULL); if (ret) { - dev_err(dev, "Request node failed for %d\n", node_id); + dev_err(dev, "Request node failed for %d\n", priv->node_id); return ret; } @@ -743,13 +740,13 @@ static int sdhci_zynqmp_set_dynamic_config(struct arasan_sdhci_priv *priv, return ret; } - ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_FIXED, 0); + ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_FIXED, 0); if (ret) { dev_err(dev, "SD_CONFIG_FIXED failed\n"); return ret; } - ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_EMMC_SEL, + ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_EMMC_SEL, dev_read_bool(dev, "non-removable")); if (ret) { dev_err(dev, "SD_CONFIG_EMMC_SEL failed\n"); @@ -779,13 +776,13 @@ static int sdhci_zynqmp_set_dynamic_config(struct arasan_sdhci_priv *priv, else mhz = 25; - ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_BASECLK, mhz); + ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_BASECLK, mhz); if (ret) { dev_err(dev, "SD_CONFIG_BASECLK failed\n"); return ret; } - ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_8BIT, + ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_8BIT, (dev_read_u32_default(dev, "bus-width", 1) == 8)); if (ret) { dev_err(dev, "SD_CONFIG_8BIT failed\n"); @@ -900,6 +897,7 @@ static int arasan_sdhci_probe(struct udevice *dev) static int arasan_sdhci_of_to_plat(struct udevice *dev) { struct arasan_sdhci_priv *priv = dev_get_priv(dev); + u32 pm_info[2]; priv->host = calloc(1, sizeof(struct sdhci_host)); if (!priv->host) @@ -916,10 +914,13 @@ static int arasan_sdhci_of_to_plat(struct udevice *dev) if (IS_ERR(priv->host->ioaddr)) return PTR_ERR(priv->host->ioaddr); - priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1); priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0); priv->no_1p8 = dev_read_bool(dev, "no-1-8-v"); + priv->node_id = 0; + if (!dev_read_u32_array(dev, "power-domains", pm_info, ARRAY_SIZE(pm_info))) + priv->node_id = pm_info[1]; + return 0; } -- cgit v1.2.3