From 07791e8d059037630703857bf5d13d079a3310bb Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Wed, 22 Dec 2021 10:55:09 +0100 Subject: usb: ehci: dm: Convert i.MX28 ehci code to driver model This commit converts i.MX28's EHCI USB host driver to driver model (DM_USB). It is a straightforward conversion (to reuse as much code as possible), based on ehci-mx5.c code. Signed-off-by: Lukasz Majewski --- drivers/usb/host/ehci-mxs.c | 184 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 184 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c index aa32af1f3a..9a614955fc 100644 --- a/drivers/usb/host/ehci-mxs.c +++ b/drivers/usb/host/ehci-mxs.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include "ehci.h" @@ -110,6 +112,7 @@ static int __ehci_hcd_stop(struct ehci_mxs_port *port) return ehci_mxs_toggle_clock(port, 0); } +#if !CONFIG_IS_ENABLED(DM_USB) static const struct ehci_mxs_port mxs_port[] = { #ifdef CONFIG_EHCI_MXS_PORT0 { @@ -184,3 +187,184 @@ int ehci_hcd_stop(int index) return ret; } +#else /* CONFIG_IS_ENABLED(DM_USB) */ +struct ehci_mxs_priv_data { + struct ehci_ctrl ctrl; + struct usb_ehci *ehci; + struct udevice *vbus_supply; + struct ehci_mxs_port port; + enum usb_init_type init_type; +}; + +/* + * Below defines correspond to imx28 clk Linux (v5.15.y) + * clock driver to provide proper offset for PHY[01] + * devices. + */ +#define CLK_USB_PHY0 62 +#define CLK_USB_PHY1 63 +#define PLL0CTRL0(base) ((base) + 0x0000) +#define PLL1CTRL0(base) ((base) + 0x0020) + +static int ehci_usb_ofdata_to_platdata(struct udevice *dev) +{ + struct ehci_mxs_priv_data *priv = dev_get_priv(dev); + struct usb_plat *plat = dev_get_plat(dev); + struct ehci_mxs_port *port = &priv->port; + u32 phandle, phy_reg, clk_reg, clk_id; + ofnode phy_node, clk_node; + const char *mode; + int ret; + + mode = ofnode_read_string(dev->node_, "dr_mode"); + if (mode) { + if (strcmp(mode, "peripheral") == 0) + plat->init_type = USB_INIT_DEVICE; + else if (strcmp(mode, "host") == 0) + plat->init_type = USB_INIT_HOST; + else + return -EINVAL; + } + + /* Read base address of the USB IP block */ + ret = ofnode_read_u32(dev->node_, "reg", &port->usb_regs); + if (ret) + return ret; + + /* Read base address of the USB PHY IP block */ + ret = ofnode_read_u32(dev->node_, "fsl,usbphy", &phandle); + if (ret) + return ret; + + phy_node = ofnode_get_by_phandle(phandle); + if (!ofnode_valid(phy_node)) + return -ENODEV; + + ret = ofnode_read_u32(phy_node, "reg", &phy_reg); + if (ret) + return ret; + + port->phy_regs = (struct mxs_usbphy_regs *)phy_reg; + + /* Read base address of the CLK IP block and proper ID */ + ret = ofnode_read_u32_index(phy_node, "clocks", 0, &phandle); + if (ret) + return ret; + + ret = ofnode_read_u32_index(phy_node, "clocks", 1, &clk_id); + if (ret) + return ret; + + clk_node = ofnode_get_by_phandle(phandle); + if (!ofnode_valid(clk_node)) + return -ENODEV; + + ret = ofnode_read_u32(clk_node, "reg", &clk_reg); + if (ret) + return ret; + + port->pll = (struct mxs_register_32 *)clk_reg; + + /* Provide proper offset for USB PHY clocks */ + if (clk_id == CLK_USB_PHY0) + port->pll = PLL0CTRL0(port->pll); + + if (clk_id == CLK_USB_PHY1) + port->pll = PLL1CTRL0(port->pll); + + debug("%s: pll_reg: 0x%p clk_id: %d\n", __func__, port->pll, clk_id); + /* + * On the imx28 the values provided by CLKCTRL_PLL0* defines to are the + * same as ones for CLKCTRL_PLL1*. As a result the former can be used + * for both ports - i.e. (usb[01]). + */ + port->pll_en_bits = CLKCTRL_PLL0CTRL0_EN_USB_CLKS | + CLKCTRL_PLL0CTRL0_POWER; + port->pll_dis_bits = CLKCTRL_PLL0CTRL0_EN_USB_CLKS; + port->gate_bits = HW_DIGCTL_CTRL_USB0_CLKGATE; + + return 0; +} + +static int ehci_usb_probe(struct udevice *dev) +{ + struct usb_plat *plat = dev_get_plat(dev); + struct usb_ehci *ehci = dev_read_addr_ptr(dev); + struct ehci_mxs_priv_data *priv = dev_get_priv(dev); + struct ehci_mxs_port *port = &priv->port; + enum usb_init_type type = plat->init_type; + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + int ret; + + priv->ehci = ehci; + priv->init_type = type; + + debug("%s: USB type: %s reg: 0x%x phy_reg 0x%p\n", __func__, + type == USB_INIT_HOST ? "HOST" : "DEVICE", port->usb_regs, + (uint32_t *)port->phy_regs); + +#if CONFIG_IS_ENABLED(DM_REGULATOR) + ret = device_get_supply_regulator(dev, "vbus-supply", + &priv->vbus_supply); + if (ret) + debug("%s: No vbus supply\n", dev->name); + + if (!ret && priv->vbus_supply) { + ret = regulator_set_enable(priv->vbus_supply, + (type == USB_INIT_DEVICE) ? + false : true); + if (ret) { + puts("Error enabling VBUS supply\n"); + return ret; + } + } +#endif + ret = __ehci_hcd_init(port, type, &hccr, &hcor); + if (ret) + return ret; + + mdelay(10); + return ehci_register(dev, hccr, hcor, NULL, 0, priv->init_type); +} + +static int ehci_usb_remove(struct udevice *dev) +{ + struct ehci_mxs_priv_data *priv = dev_get_priv(dev); + struct ehci_mxs_port *port = &priv->port; + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; + +#if CONFIG_IS_ENABLED(DM_REGULATOR) + if (priv->vbus_supply) { + ret = regulator_set_enable(priv->vbus_supply, false); + if (ret) { + puts("Error disabling VBUS supply\n"); + return ret; + } + } +#endif + return __ehci_hcd_stop(port); +} + +static const struct udevice_id mxs_usb_ids[] = { + { .compatible = "fsl,imx28-usb" }, + { } +}; + +U_BOOT_DRIVER(usb_mxs) = { + .name = "ehci_mxs", + .id = UCLASS_USB, + .of_match = mxs_usb_ids, + .of_to_plat = ehci_usb_ofdata_to_platdata, + .probe = ehci_usb_probe, + .remove = ehci_usb_remove, + .ops = &ehci_usb_ops, + .plat_auto = sizeof(struct usb_plat), + .priv_auto = sizeof(struct ehci_mxs_priv_data), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; +#endif /* !CONFIG_IS_ENABLED(DM_USB) */ -- cgit v1.2.3