From a25d6b65c21b1298712c75604ff606025cb40267 Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Thu, 15 Jul 2021 14:19:24 -0500 Subject: spl: Introduce spl_board_prepare_for_optee() hook OP-TEE requires some particular setup, which is not needed for linux or other payloads. Add a hook for platform-specific code to perform any OP-TEE related configuration and initialization. A weak function is used because it is symmetrical to other spl_board_prepare_for_*() implementations. A solution to avoid the use of weak functions would trivially apply to all these implementations. However, re-designing this is beyond the scope of this patch. Signed-off-by: Alexandru Gagniuc Reviewed-by: Tom Rini Reviewed-by: Simon Glass Reviewed-by: Patrick Delaunay --- include/spl.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/spl.h') diff --git a/include/spl.h b/include/spl.h index 74a1939452..925b6f0cc6 100644 --- a/include/spl.h +++ b/include/spl.h @@ -432,6 +432,20 @@ int spl_parse_image_header(struct spl_image_info *spl_image, const struct image_header *header); void spl_board_prepare_for_linux(void); + +/** + * spl_board_prepare_for_optee() - Prepare board for an OPTEE payload + * + * Prepares the board for booting an OP-TEE payload. Initialization is platform + * specific, and may include configuring the TrustZone memory, and other + * initialization steps required by OP-TEE. + * Note that @fdt is not used directly by OP-TEE. OP-TEE passes this @fdt to + * its normal world target. This target is not guaranteed to be u-boot, so @fdt + * changes that would normally be done by u-boot should be done in this step. + * + * @fdt: Devicetree that will be passed on, or NULL + */ +void spl_board_prepare_for_optee(void *fdt); void spl_board_prepare_for_boot(void); int spl_board_ubi_load_image(u32 boot_device); int spl_board_boot_device(u32 boot_device); -- cgit v1.2.3