/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2018-2021 Toradex AG * * Configuration settings for the Colibri iMX6ULL module. * * based on colibri_imx7.h */ #ifndef __COLIBRI_IMX6ULL_CONFIG_H #define __COLIBRI_IMX6ULL_CONFIG_H #include "mx6_common.h" #define CONFIG_IOMUX_LPSR #define PHYS_SDRAM_SIZE SZ_1G /* ENET1 */ #define IMX_FEC_BASE ENET2_BASE_ADDR /* MMC Config */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 1 #define CONFIG_IPADDR 192.168.10.2 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.10.1 #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC) #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ "uboot_blk=2\0" \ "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ "setexpr blkcnt ${blkcnt} / 0x200\0" \ "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" #elif defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND) #define UBOOT_UPDATE \ "update_uboot=nand erase.part u-boot1 && " \ "nand write ${loadaddr} u-boot1 ${filesize} && " \ "nand erase.part u-boot2 && " \ "nand write ${loadaddr} u-boot2 ${filesize}\0" #endif #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82100000\0" \ "kernel_addr_r=0x81000000\0" \ "pxefile_addr_r=0x87100000\0" \ "ramdisk_addr_r=0x82200000\0" \ "scriptaddr=0x87000000\0" #define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ "nfsboot=run setup; " \ "setenv bootargs ${defargs} ${nfsargs} " \ "${setupargs} ${vidargs}; echo Booting from NFS...;" \ "dhcp ${kernel_addr_r} && " \ "tftp ${fdt_addr_r} ${fdtfile} && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #define UBI_BOOTCMD \ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ "ubi.fm_autoconvert=1\0" \ "ubiboot=run setup; " \ "setenv bootargs ${defargs} ${ubiargs} " \ "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \ "ubi part ubi &&" \ "ubi read ${kernel_addr_r} kernel && " \ "ubi read ${fdt_addr_r} dtb && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND) /* Run Distro Boot script if ubiboot fails */ #define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;" #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" #define MODULE_EXTRA_ENV_SETTINGS \ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD #else #define MODULE_EXTRA_ENV_SETTINGS "" #endif #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND) #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) #elif defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC) #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) #endif #include #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ NFS_BOOTCMD \ UBI_BOOTCMD \ UBOOT_UPDATE \ "bootubipart=ubi\0" \ "console=ttymxc0\0" \ "defargs=user_debug=30\0" \ "fdt_board=eval-v3\0" \ "fdt_fixup=;\0" \ "ip_dyn=yes\0" \ "kernel_file=zImage\0" \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ "${board}/flash_eth.img && source ${loadaddr}\0" \ "setsdupdate=mmc rescan && setenv interface mmc && " \ "fatload ${interface} 0:1 ${loadaddr} " \ "${board}/flash_blk.img && source ${loadaddr}\0" \ "setup=setenv setupargs " \ "console=tty1 console=${console}" \ ",${baudrate}n8 ${memargs} consoleblank=0\0" \ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ "setusbupdate=usb start && setenv interface usb && " \ "fatload ${interface} 0:1 ${loadaddr} " \ "${board}/flash_blk.img && source ${loadaddr}\0" \ "splashpos=m,m\0" \ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ "vidargs=video=mxsfb:640x480M-16@60" /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* environment organization */ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */ #define CONFIG_SYS_NAND_BASE -1 #endif /* USB Configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USBD_HS /* USB Device Firmware Update support */ #define DFU_DEFAULT_POLL_TIMEOUT 300 #if defined(CONFIG_DM_VIDEO) #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif #endif /* __COLIBRI_IMX6ULL_CONFIG_H */