summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/mpddrc.c
blob: 3df0ea7c7924f5ce0c298a7a14ed96b0f261c9c4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2013 Atmel Corporation
 *		      Bo Shen <voice.shen@atmel.com>
 *
 * Copyright (C) 2015 Atmel Corporation
 *		      Wenyou Yang <wenyou.yang@atmel.com>
 */

#include <common.h>
#include <asm/io.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/at91_common.h>

#define SAMA5D3_MPDDRC_VERSION		0x140

static inline void atmel_mpddr_op(const struct atmel_mpddr *mpddr,
	      int mode,
	      u32 ram_address)
{
	writel(mode, &mpddr->mr);
	dmb();
	writel(0, ram_address);
}

static int ddr2_decodtype_is_seq(const unsigned int base, u32 cr)
{
	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
	u16 version = readl(&mpddr->version) & 0xffff;

	if ((version >= SAMA5D3_MPDDRC_VERSION) &&
	    (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
		return 0;

	return 1;
}


int ddr2_init(const unsigned int base,
	      const unsigned int ram_address,
	      const struct atmel_mpddrc_config *mpddr_value)
{
	const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;

	u32 ba_off, cr;

	/* Compute bank offset according to NC in configuration register */
	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
	if (ddr2_decodtype_is_seq(base, mpddr_value->cr))
		ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;

	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;

	/* Program the memory device type into the memory device register */
	writel(mpddr_value->md, &mpddr->md);

	/* Program the configuration register */
	writel(mpddr_value->cr, &mpddr->cr);

	/* Program the timing register */
	writel(mpddr_value->tpr0, &mpddr->tpr0);
	writel(mpddr_value->tpr1, &mpddr->tpr1);
	writel(mpddr_value->tpr2, &mpddr->tpr2);

	/* Issue a NOP command */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/* A 200 us is provided to precede any signal toggle */
	udelay(200);

	/* Issue a NOP command */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/* Issue an all banks precharge command */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);

	/* Issue an extended mode register set(EMRS2) to choose operation */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x2 << ba_off));

	/* Issue an extended mode register set(EMRS3) to set EMSR to 0 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x3 << ba_off));

	/*
	 * Issue an extended mode register set(EMRS1) to enable DLL and
	 * program D.I.C (output driver impedance control)
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x1 << ba_off));

	/* Enable DLL reset */
	cr = readl(&mpddr->cr);
	writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr);

	/* A mode register set(MRS) cycle is issued to reset DLL */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);

	/* Issue an all banks precharge command */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);

	/* Two auto-refresh (CBR) cycles are provided */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);

	/* Disable DLL reset */
	cr = readl(&mpddr->cr);
	writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr);

	/* A mode register set (MRS) cycle is issued to disable DLL reset */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);

	/* Set OCD calibration in default state */
	cr = readl(&mpddr->cr);
	writel(cr | ATMEL_MPDDRC_CR_OCD_DEFAULT, &mpddr->cr);

	/*
	 * An extended mode register set (EMRS1) cycle is issued
	 * to OCD default value
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x1 << ba_off));

	 /* OCD calibration mode exit */
	cr = readl(&mpddr->cr);
	writel(cr & (~ATMEL_MPDDRC_CR_OCD_DEFAULT), &mpddr->cr);

	/*
	 * An extended mode register set (EMRS1) cycle is issued
	 * to enable OCD exit
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x1 << ba_off));

	/* A nornal mode command is provided */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);

	/* Perform a write access to any DDR2-SDRAM address */
	writel(0, ram_address);

	/* Write the refresh rate */
	writel(mpddr_value->rtr, &mpddr->rtr);

	return 0;
}

int ddr3_init(const unsigned int base,
	      const unsigned int ram_address,
	      const struct atmel_mpddrc_config *mpddr_value)
{
	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
	u32 ba_off;

	/* Compute bank offset according to NC in configuration register */
	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
	if (ddr2_decodtype_is_seq(base, mpddr_value->cr))
		ba_off += ((mpddr_value->cr &
			   ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;

	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;

	/* Program the memory device type */
	writel(mpddr_value->md, &mpddr->md);

	/*
	 * Program features of the DDR3-SDRAM device and timing parameters
	 */
	writel(mpddr_value->cr, &mpddr->cr);

	writel(mpddr_value->tpr0, &mpddr->tpr0);
	writel(mpddr_value->tpr1, &mpddr->tpr1);
	writel(mpddr_value->tpr2, &mpddr->tpr2);

	/* A NOP command is issued to the DDR3-SRAM */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/* A pause of at least 500us must be observed before a single toggle. */
	udelay(500);

	/* A NOP command is issued to the DDR3-SDRAM */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/*
	 * An Extended Mode Register Set (EMRS2) cycle is issued to choose
	 * between commercial or high temperature operations.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x2 << ba_off));
	/*
	 * Step 7: An Extended Mode Register Set (EMRS3) cycle is issued to set
	 * the Extended Mode Register to 0.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x3 << ba_off));
	/*
	 * An Extended Mode Register Set (EMRS1) cycle is issued to disable and
	 * to program O.D.S. (Output Driver Strength).
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
		       ram_address + (0x1 << ba_off));

	/*
	 * Write a one to the DLL bit (enable DLL reset) in the MPDDRC
	 * Configuration Register.
	 */

	/* A Mode Register Set (MRS) cycle is issued to reset DLL. */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);

	udelay(50);

	/*
	 * A Calibration command (MRS) is issued to calibrate RTT and RON
	 * values for the Process Voltage Temperature (PVT).
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_DEEP_CMD, ram_address);

	/* A Normal Mode command is provided. */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);

	/* Perform a write access to any DDR3-SDRAM address. */
	writel(0, ram_address);

	/*
	 * Write the refresh rate into the COUNT field in the MPDDRC
	 * Refresh Timer Register (MPDDRC_RTR):
	 */
	writel(mpddr_value->rtr, &mpddr->rtr);

	return 0;
}

int lpddr2_init(const unsigned int base,
		const unsigned int ram_address,
		const struct atmel_mpddrc_config *mpddr_value)
{
	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
	u32 reg;

	writel(mpddr_value->lpddr23_lpr, &mpddr->lpddr23_lpr);

	writel(mpddr_value->tim_cal, &mpddr->tim_cal);

	/* 1. Program the memory device type */
	writel(mpddr_value->md, &mpddr->md);

	/*
	 * 2. Program features of the LPDDR2-SDRAM device and timing parameters
	 */
	writel(mpddr_value->cr, &mpddr->cr);

	writel(mpddr_value->tpr0, &mpddr->tpr0);
	writel(mpddr_value->tpr1, &mpddr->tpr1);
	writel(mpddr_value->tpr2, &mpddr->tpr2);

	/* 3. A NOP command is issued to the LPDDR2-SDRAM */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/*
	 * 3bis. Add memory barrier then Perform a write access to
	 * any low-power DDR2-SDRAM address to acknowledge the command.
	*/

	dmb();
	writel(0, ram_address);

	/* 4. A pause of at least 100 ns must be observed before a single toggle */
	udelay(1);

	/* 5. A NOP command is issued to the LPDDR2-SDRAM */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/*  6. A pause of at least 200 us must be observed before a Reset Command */
	udelay(200);

	/* 7. A Reset command is issued to the low-power DDR2-SDRAM. */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(63), ram_address);

	/*
	 * 8. A pause of at least tINIT5 must be observed before issuing
	 * any commands
	 */
	udelay(1);

	/* 9. A Calibration command is issued to the low-power DDR2-SDRAM. */
	reg = readl(&mpddr->cr);
	reg &= ~ATMEL_MPDDRC_CR_ZQ_RESET;
	reg |= ATMEL_MPDDRC_CR_ZQ_RESET;
	writel(reg, &mpddr->cr);

	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(10), ram_address);

	/*
	 * 9bis: The ZQ Calibration command is now issued.
	 * Program the type of calibration in the MPDDRC_CR: set the
	 * ZQ field to the SHORT value.
	 */
	reg = readl(&mpddr->cr);
	reg &= ~ATMEL_MPDDRC_CR_ZQ_RESET;
	reg |= ATMEL_MPDDRC_CR_ZQ_SHORT;
	writel(reg, &mpddr->cr);

	/*
	 * 10: A Mode Register Write command with 1 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(1), ram_address);

	/*
	 * 11: A Mode Register Write command with 2 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(2), ram_address);

	/*
	 * 12: A Mode Register Write command with 3 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(3), ram_address);

	/*
	 * 13: A Mode Register Write command with 16 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(16), ram_address);

	/*
	 * 14: In the DDR Configuration Register, open the input buffers.
	 */
#ifdef CONFIG_ATMEL_SFR
	configure_ddrcfg_input_buffers(true);
#endif

	/* 15. A NOP command is issued to the LPDDR2-SDRAM */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);

	/*
	 * 16: A Mode Register Write command with 5 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(5), ram_address);

	/*
	 * 17: A Mode Register Write command with 6 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(6), ram_address);

	/*
	 * 18: A Mode Register Write command with 8 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(8), ram_address);

	/*
	 * 19: A Mode Register Write command with 0 to the MRS field
	 * is issued to the low-power DDR2-SDRAM.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD |
			 ATMEL_MPDDRC_MR_MRS(0), ram_address);

	/*
	 * 20: A Normal Mode command is provided.
	 */
	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);

	 /* 21: In the DDR Configuration Register, close the input buffers. */
#ifdef CONFIG_ATMEL_SFR
	configure_ddrcfg_input_buffers(false);
#endif

	/*
	 * 22: Write the refresh rate into the COUNT field in the MPDDRC
	 * Refresh Timer Register.
	 */
	writel(mpddr_value->rtr, &mpddr->rtr);

	/* 23. Configre CAL MR4 register */
	writel(mpddr_value->cal_mr4, &mpddr->cal_mr4);

	return 0;
}