1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
*/
#include <common.h>
#include <log.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/flow.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/tegra_i2c.h>
#include <linux/delay.h>
#include "../cpu.h"
/* In case this function is not defined */
__weak void pmic_enable_cpu_vdd(void) {}
static void enable_cpu_power_rail(void)
{
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 reg;
debug("enable_cpu_power_rail entry\n");
reg = readl(&pmc->pmc_cntrl);
reg |= CPUPWRREQ_OE;
writel(reg, &pmc->pmc_cntrl);
}
/**
* The T30 requires some special clock initialization, including setting up
* the dvc i2c, turning on mselect and selecting the G CPU cluster
*/
void t30_init_clocks(void)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
u32 val;
debug("t30_init_clocks entry\n");
/* Set active CPU cluster to G */
clrbits_le32(flow->cluster_control, 1 << 0);
writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) |
(1 << CLK_SYS_RATE_AHB_RATE_SHIFT) |
(0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) |
(0 << CLK_SYS_RATE_APB_RATE_SHIFT);
writel(val, &clkrst->crc_clk_sys_rate);
/* Put i2c, mselect in reset and enable clocks */
reset_set_enable(PERIPH_ID_DVC_I2C, 1);
clock_set_enable(PERIPH_ID_DVC_I2C, 1);
reset_set_enable(PERIPH_ID_MSELECT, 1);
clock_set_enable(PERIPH_ID_MSELECT, 1);
/* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */
clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2);
/*
* Our high-level clock routines are not available prior to
* relocation. We use the low-level functions which require a
* hard-coded divisor. Use CLK_M with divide by (n + 1 = 17)
*/
clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16);
/*
* Give clocks time to stabilize, then take i2c and mselect out of
* reset
*/
udelay(1000);
reset_set_enable(PERIPH_ID_DVC_I2C, 0);
reset_set_enable(PERIPH_ID_MSELECT, 0);
}
static void set_cpu_running(int run)
{
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
debug("set_cpu_running entry, run = %d\n", run);
writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events);
}
void start_cpu(u32 reset_vector)
{
debug("start_cpu entry, reset_vector = %x\n", reset_vector);
t30_init_clocks();
/* Enable VDD_CPU */
enable_cpu_power_rail();
pmic_enable_cpu_vdd();
set_cpu_running(0);
/* Hold the CPUs in reset */
reset_A9_cpu(1);
/* Disable the CPU clock */
enable_cpu_clock(0);
/* Enable CoreSight */
clock_enable_coresight(1);
/*
* Set the entry point for CPU execution from reset,
* if it's a non-zero value.
*/
if (reset_vector)
writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
/* Enable the CPU clock */
enable_cpu_clock(1);
/* If the CPU doesn't already have power, power it up */
powerup_cpu();
/* Take the CPU out of reset */
reset_A9_cpu(0);
set_cpu_running(1);
}
|
