1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
*
* Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
*/
#include <common.h>
#include <debug_uart.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/atmel_pio4.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_sdhci.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sama5d2.h>
extern void at91_pda_detect(void);
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_DM_VIDEO
at91_video_show_board_info();
#endif
at91_pda_detect();
return 0;
}
#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void board_uart0_hw_init(void)
{
atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, ATMEL_PIO_PUEN_MASK); /* URXD0 */
atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */
at91_periph_clk_enable(ATMEL_ID_UART0);
}
void board_debug_uart_init(void)
{
board_uart0_hw_init();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
return 0;
}
#endif
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
return 0;
}
#endif
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
#ifdef CONFIG_SD_BOOT
void spl_mmc_init(void)
{
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0); /* CMD */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0); /* DAT0 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0); /* DAT1 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0); /* DAT2 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0); /* DAT3 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0); /* CK */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CD */
at91_periph_clk_enable(ATMEL_ID_SDMMC0);
}
#endif
void spl_board_init(void)
{
#ifdef CONFIG_SD_BOOT
spl_mmc_init();
#endif
}
void spl_display_print(void)
{
}
static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
{
ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_LPDDR2_SDRAM);
ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_9 |
ATMEL_MPDDRC_CR_NR_ROW_14 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_ZQ_SHORT |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddrc->lpddr23_lpr = ATMEL_MPDDRC_LPDDR23_LPR_DS(0x3);
/*
* The AD220032D average time between REFRESH commands (Trefi): 3.9us
* 3.9us * 164MHz = 639.6 = 0x27F.
*/
ddrc->rtr = 0x27f;
/* Enable Adjust Refresh Rate */
ddrc->rtr |= ATMEL_MPDDRC_RTR_ADJ_REF;
ddrc->tpr0 = ((7 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET) |
(11 << ATMEL_MPDDRC_TPR0_TRC_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TRP_OFFSET) |
(2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET) |
(2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET) |
(5 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET));
ddrc->tpr1 = ((21 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET) |
(0 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET) |
(23 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET) |
(2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET));
ddrc->tpr2 = ((0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET) |
(0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET) |
(4 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET) |
(2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET) |
(10 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
ddrc->tim_cal = ATMEL_MPDDRC_CALR_ZQCS(15);
/*
* According to the sama5d2 datasheet and the following values:
* T Sens = 0.75%/C, V Sens = 0.2%/mV, T driftrate = 1C/sec and V driftrate = 15 mV/s
* Warning: note that the values T driftrate and V driftrate are dependent on
* the application environment.
* ZQCS period is 1.5 / ((0.75 x 1) + (0.2 x 15)) = 0.4s
* If Trefi is 3.9us, we have: 400000 / 3.9 = 102564: we can maximize
* this timer to 0xFFFE.
*/
ddrc->cal_mr4 = ATMEL_MPDDRC_CAL_MR4_COUNT_CAL(0xFFFE);
/*
* MR4 Read interval is dependent on the application environment.
* Here, we want to maximize this value as temperature is supposed
* to vary slowly in the application chosen.
* If Trefi is 3.9us, we have:
* (0xFFFE) 65534 x 3.9 = 0.25s between MR4 reads.
*/
ddrc->cal_mr4 |= ATMEL_MPDDRC_CAL_MR4_MR4R(0xFFFE);
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
struct atmel_mpddrc_config ddrc_config;
u32 reg;
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(AT91_PMC_DDR, &pmc->scer);
ddrc_conf(&ddrc_config);
reg = readl(&mpddrc->io_calibr);
reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV;
reg |= ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_48;
reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO;
reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100);
writel(reg, &mpddrc->io_calibr);
writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_ONE_CYCLE,
&mpddrc->rd_data_path);
lpddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config);
}
void at91_pmc_init(void)
{
u32 tmp;
/*
* while coming from the ROM code, we run on PLLA @ 492 MHz / 164 MHz
* so we need to slow down and configure MCKR accordingly.
* This is why we have a special flavor of the switching function.
*/
tmp = AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_MAIN;
at91_mck_init_down(tmp);
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(40) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif
|