1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2018-2019, 2021 NXP
*
*/
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <hang.h>
#include <image.h>
#include <init.h>
#include <log.h>
#include <spl.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx8mn_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/arch/ddr.h>
#include <dm/uclass.h>
#include <dm/device.h>
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>
#include <power/pmic.h>
#include <power/pca9450.h>
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <fsl_esdhc_imx.h>
#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
return BOOT_DEVICE_BOOTROM;
}
void spl_dram_init(void)
{
ddr_init(&dram_timing);
}
void spl_board_init(void)
{
struct udevice *dev;
int ret;
arch_misc_init();
puts("Normal Boot\n");
ret = uclass_get_device_by_name(UCLASS_CLK,
"clock-controller@30380000",
&dev);
if (ret < 0)
printf("Failed to find clock node. Check device tree\n");
}
#if CONFIG_IS_ENABLED(DM_PMIC_PCA9450)
int power_init_board(void)
{
struct udevice *dev;
int ret;
ret = pmic_get("pmic@25", &dev);
if (ret == -ENODEV) {
puts("No pca9450@25\n");
return 0;
}
if (ret != 0)
return ret;
/* BUCKxOUT_DVS0/1 control BUCK123 output */
pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
#ifdef CONFIG_IMX8MN_LOW_DRIVE_MODE
/* Set VDD_SOC/VDD_DRAM to 0.8v for low drive mode */
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x10);
#else
/* increase VDD_SOC/VDD_DRAM to typical value 0.95V before first DRAM access */
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1C);
#endif
/* Set DVS1 to 0.85v for suspend */
/* Enable DVS control through PMIC_STBY_REQ and set B1_ENMODE=1 (ON by PMIC_ON_REQ=H) */
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14);
pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
/* set VDD_SNVS_0V8 from default 0.85V */
pmic_reg_write(dev, PCA9450_LDO2CTRL, 0xC0);
/* enable LDO4 to 1.2v */
pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x44);
/* set WDOG_B_CFG to cold reset */
pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
return 0;
}
#endif
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* Just empty function now - can't decide what to choose */
debug("%s: %s\n", __func__, name);
return 0;
}
#endif
void board_init_f(ulong dummy)
{
int ret;
arch_cpu_init();
init_uart_clk(1);
timer_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
ret = spl_init();
if (ret) {
debug("spl_init() failed: %d\n", ret);
hang();
}
preloader_console_init();
enable_tzc380();
/* DDR initialization */
spl_dram_init();
board_init_r(NULL, 0);
}
|