1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
|
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2020, STMicroelectronics - All Rights Reserved
*/
#include <common.h>
#include <dm.h>
#include <asm/arch/ddr.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <power/pmic.h>
#include <power/stpmic1.h>
int board_ddr_power_init(enum ddr_type ddr_type)
{
struct udevice *dev;
bool buck3_at_1800000v = false;
int ret;
u32 buck2;
ret = uclass_get_device_by_driver(UCLASS_PMIC,
DM_GET_DRIVER(pmic_stpmic1), &dev);
if (ret)
/* No PMIC on board */
return 0;
switch (ddr_type) {
case STM32MP_DDR3:
/* VTT = Set LDO3 to sync mode */
ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
if (ret < 0)
return ret;
ret &= ~STPMIC1_LDO3_MODE;
ret &= ~STPMIC1_LDO12356_VOUT_MASK;
ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
ret);
if (ret < 0)
return ret;
/* VDD_DDR = Set BUCK2 to 1.35V */
ret = pmic_clrsetbits(dev,
STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
STPMIC1_BUCK_VOUT_MASK,
STPMIC1_BUCK2_1350000V);
if (ret < 0)
return ret;
/* Enable VDD_DDR = BUCK2 */
ret = pmic_clrsetbits(dev,
STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
if (ret < 0)
return ret;
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
/* Enable VREF */
ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
if (ret < 0)
return ret;
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
/* Enable VTT = LDO3 */
ret = pmic_clrsetbits(dev,
STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
if (ret < 0)
return ret;
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
break;
case STM32MP_LPDDR2_16:
case STM32MP_LPDDR2_32:
case STM32MP_LPDDR3_16:
case STM32MP_LPDDR3_32:
/*
* configure VDD_DDR1 = LDO3
* Set LDO3 to 1.8V
* + bypass mode if BUCK3 = 1.8V
* + normal mode if BUCK3 != 1.8V
*/
ret = pmic_reg_read(dev,
STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3));
if (ret < 0)
return ret;
if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V)
buck3_at_1800000v = true;
ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
if (ret < 0)
return ret;
ret &= ~STPMIC1_LDO3_MODE;
ret &= ~STPMIC1_LDO12356_VOUT_MASK;
ret |= STPMIC1_LDO3_1800000;
if (buck3_at_1800000v)
ret |= STPMIC1_LDO3_MODE;
ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
ret);
if (ret < 0)
return ret;
/* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/
switch (ddr_type) {
case STM32MP_LPDDR2_32:
case STM32MP_LPDDR3_32:
buck2 = STPMIC1_BUCK2_1250000V;
break;
default:
case STM32MP_LPDDR2_16:
case STM32MP_LPDDR3_16:
buck2 = STPMIC1_BUCK2_1200000V;
break;
}
ret = pmic_clrsetbits(dev,
STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
STPMIC1_BUCK_VOUT_MASK,
buck2);
if (ret < 0)
return ret;
/* Enable VDD_DDR1 = LDO3 */
ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
if (ret < 0)
return ret;
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
/* Enable VDD_DDR2 =BUCK2 */
ret = pmic_clrsetbits(dev,
STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
if (ret < 0)
return ret;
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
/* Enable VREF */
ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
if (ret < 0)
return ret;
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
break;
default:
break;
};
return 0;
}
|
