blob: 254c3bbe966ef02bda98c08c9490d9245a9d74da (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
Introduction
============
The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip
RK3399 in a Qseven-compatible form-factor.
RK3399-Q7 features:
* CPU: ARMv8 64bit Big-Little architecture,
* Big: dual-core Cortex-A72
* Little: quad-core Cortex-A53
* IRAM: 200KB
* DRAM: 4GB-128MB dual-channel
* eMMC: onboard eMMC
* SD/MMC
* GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY
* USB:
* USB3.0 dual role port
* 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub
* Display: HDMI/eDP/MIPI
* Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF)
* NOR Flash: onboard SPI NOR
* Companion Controller: onboard additional Cortex-M0 microcontroller
* RTC
* fan controller
* CAN
Here is the step-by-step to boot to U-Boot on rk3399.
Get the Source and build ATF binary
===================================
> git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
Compile the ATF
===============
> cd trusted-firmware-a
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
> cp build/rk3399/release/bl31/bl31.elf ../u-boot/bl31.elf
Compile the U-Boot
==================
> cd ../u-boot
> make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
Package the image
=================
The SPL image for SD-Card/eMMC is readily available in idbloader.img at the
root of U-Boot after compilation.
Creating an SPL image for SPI-NOR:
> tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader-spi.img
Flash the image
===============
Copy the SPL to offset 32k for SD/eMMC, offset 0 for NOR-Flash and the FIT
image to offset 256k.
SD-Card
-------
> dd if=idbloader.img of=/dev/sdb seek=64
> dd if=u-boot.itb of=/dev/sdb seek=512
eMMC
----
rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
help of the Rockchip loader binary.
> git clone https://github.com/rockchip-linux/rkdeveloptool
> cd rkdeveloptool
> autoreconf -i && ./configure && make
> git clone https://github.com/rockchip-linux/rkbin.git
> cd rkbin
> ./tools/boot_merger RKBOOT/RK3399MINIALL.ini
> cd ..
> ./rkdeveloptool db rkbin/rk3399_loader_v1.25.126.bin
> ./rkdeveloptool wl 64 ../idbloader.img
> ./rkdeveloptool wl 512 ../u-boot.itb
NOR-Flash
---------
rkdeveloptool allows to flash the on-board SPI via the USB OTG interface with
help of the Rockchip loader binary.
> git clone https://github.com/rockchip-linux/rkdeveloptool
> cd rkdeveloptool
> autoreconf -i && ./configure && make
> git clone https://github.com/rockchip-linux/rkbin.git
> cd rkbin
> ./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini
> cd ..
> ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin
> ./rkdeveloptool ef
> ./rkdeveloptool wl 0 ../idbloader-spi.img
> ./rkdeveloptool wl 512 ../u-boot.itb
|
