1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013 - 2015 Xilinx, Inc.
*
* Xilinx Zynq SD Host Controller Interface
*/
#include <clk.h>
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <linux/delay.h>
#include "mmc_private.h"
#include <log.h>
#include <reset.h>
#include <dm/device_compat.h>
#include <linux/err.h>
#include <linux/libfdt.h>
#include <asm/types.h>
#include <linux/math64.h>
#include <asm/cache.h>
#include <malloc.h>
#include <sdhci.h>
#include <zynqmp_firmware.h>
#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8
#define SDHCI_ARASAN_ITAPDLY_SEL_MASK GENMASK(7, 0)
#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC
#define SDHCI_ARASAN_OTAPDLY_SEL_MASK GENMASK(5, 0)
#define SDHCI_ITAPDLY_CHGWIN BIT(9)
#define SDHCI_ITAPDLY_ENABLE BIT(8)
#define SDHCI_OTAPDLY_ENABLE BIT(6)
#define SDHCI_TUNING_LOOP_COUNT 40
#define MMC_BANK2 0x2
#define SD_DLL_CTRL 0xFF180358
#define SD_ITAP_DLY 0xFF180314
#define SD_OTAP_DLY 0xFF180318
#define SD0_DLL_RST BIT(2)
#define SD1_DLL_RST BIT(18)
#define SD0_ITAPCHGWIN BIT(9)
#define SD1_ITAPCHGWIN BIT(25)
#define SD0_ITAPDLYENA BIT(8)
#define SD1_ITAPDLYENA BIT(24)
#define SD0_ITAPDLYSEL_MASK GENMASK(7, 0)
#define SD1_ITAPDLYSEL_MASK GENMASK(23, 16)
#define SD0_OTAPDLYSEL_MASK GENMASK(5, 0)
#define SD1_OTAPDLYSEL_MASK GENMASK(21, 16)
struct arasan_sdhci_clk_data {
int clk_phase_in[MMC_TIMING_MMC_HS400 + 1];
int clk_phase_out[MMC_TIMING_MMC_HS400 + 1];
};
struct arasan_sdhci_plat {
struct mmc_config cfg;
struct mmc mmc;
};
struct arasan_sdhci_priv {
struct sdhci_host *host;
struct arasan_sdhci_clk_data clk_data;
u32 node_id;
u8 bank;
u8 no_1p8;
struct reset_ctl_bulk resets;
};
/* For Versal platforms zynqmp_mmio_write() won't be available */
__weak int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value)
{
return 0;
}
__weak int xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
u32 arg3, u32 *ret_payload)
{
return 0;
}
__weak int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id)
{
return 1;
}
#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
/* Default settings for ZynqMP Clock Phases */
static const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63, 0,
0, 183, 54, 0, 0};
static const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72,
135, 48, 72, 135, 0};
/* Default settings for Versal Clock Phases */
static const u32 versal_iclk_phases[] = {0, 132, 132, 0, 132,
0, 0, 162, 90, 0, 0};
static const u32 versal_oclk_phases[] = {0, 60, 48, 0, 48, 72,
90, 36, 60, 90, 0};
static const u8 mode2timing[] = {
[MMC_LEGACY] = MMC_TIMING_LEGACY,
[MMC_HS] = MMC_TIMING_MMC_HS,
[SD_HS] = MMC_TIMING_SD_HS,
[MMC_HS_52] = MMC_TIMING_MMC_HS,
[MMC_DDR_52] = MMC_TIMING_MMC_DDR52,
[UHS_SDR12] = MMC_TIMING_UHS_SDR12,
[UHS_SDR25] = MMC_TIMING_UHS_SDR25,
[UHS_SDR50] = MMC_TIMING_UHS_SDR50,
[UHS_DDR50] = MMC_TIMING_UHS_DDR50,
[UHS_SDR104] = MMC_TIMING_UHS_SDR104,
[MMC_HS_200] = MMC_TIMING_MMC_HS200,
};
static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay)
{
int ret;
if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
if (node_id == NODE_SD_0) {
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN,
SD0_ITAPCHGWIN);
if (ret)
return ret;
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYENA,
SD0_ITAPDLYENA);
if (ret)
return ret;
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYSEL_MASK,
itap_delay);
if (ret)
return ret;
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN, 0);
if (ret)
return ret;
}
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN,
SD1_ITAPCHGWIN);
if (ret)
return ret;
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYENA,
SD1_ITAPDLYENA);
if (ret)
return ret;
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYSEL_MASK,
(itap_delay << 16));
if (ret)
return ret;
ret = zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN, 0);
if (ret)
return ret;
} else {
return xilinx_pm_request(PM_IOCTL, node_id,
IOCTL_SET_SD_TAPDELAY,
PM_TAPDELAY_INPUT, itap_delay, NULL);
}
return 0;
}
static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay)
{
if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
if (node_id == NODE_SD_0)
return zynqmp_mmio_write(SD_OTAP_DLY,
SD0_OTAPDLYSEL_MASK,
otap_delay);
return zynqmp_mmio_write(SD_OTAP_DLY, SD1_OTAPDLYSEL_MASK,
(otap_delay << 16));
} else {
return xilinx_pm_request(PM_IOCTL, node_id,
IOCTL_SET_SD_TAPDELAY,
PM_TAPDELAY_OUTPUT, otap_delay, NULL);
}
}
static inline int zynqmp_dll_reset(u32 node_id, u32 type)
{
if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
if (node_id == NODE_SD_0)
return zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST,
type == PM_DLL_RESET_ASSERT ?
SD0_DLL_RST : 0);
return zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST,
type == PM_DLL_RESET_ASSERT ?
SD1_DLL_RST : 0);
} else {
return xilinx_pm_request(PM_IOCTL, node_id,
IOCTL_SD_DLL_RESET, type, 0, NULL);
}
}
static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 node_id)
{
struct mmc *mmc = (struct mmc *)host->mmc;
struct udevice *dev = mmc->dev;
unsigned long timeout;
int ret;
u16 clk;
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
clk &= ~(SDHCI_CLOCK_CARD_EN);
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
/* Issue DLL Reset */
ret = zynqmp_dll_reset(node_id, PM_DLL_RESET_ASSERT);
if (ret) {
dev_err(dev, "dll_reset assert failed with err: %d\n", ret);
return ret;
}
/* Allow atleast 1ms delay for proper DLL reset */
mdelay(1);
ret = zynqmp_dll_reset(node_id, PM_DLL_RESET_RELEASE);
if (ret) {
dev_err(dev, "dll_reset release failed with err: %d\n", ret);
return ret;
}
/* Wait max 20 ms */
timeout = 100;
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
dev_err(dev, ": Internal clock never stabilised.\n");
return -EBUSY;
}
timeout--;
udelay(1000);
}
clk |= SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
return 0;
}
static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
{
struct mmc_cmd cmd;
struct mmc_data data;
u32 ctrl;
struct sdhci_host *host;
struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
int tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
dev_dbg(mmc->dev, "%s\n", __func__);
host = priv->host;
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl |= SDHCI_CTRL_EXEC_TUNING;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
mdelay(1);
arasan_zynqmp_dll_reset(host, priv->node_id);
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
do {
cmd.cmdidx = opcode;
cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = 0;
data.blocksize = 64;
data.blocks = 1;
data.flags = MMC_DATA_READ;
if (tuning_loop_counter-- == 0)
break;
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
mmc->bus_width == 8)
data.blocksize = 128;
sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
data.blocksize),
SDHCI_BLOCK_SIZE);
sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
mmc_send_cmd(mmc, &cmd, NULL);
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
udelay(1);
} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
if (tuning_loop_counter < 0) {
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
}
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
printf("%s:Tuning failed\n", __func__);
return -1;
}
udelay(1);
arasan_zynqmp_dll_reset(host, priv->node_id);
/* Enable only interrupts served by the SD controller */
sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
SDHCI_INT_ENABLE);
/* Mask all sdhci interrupt sources */
sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
return 0;
}
/**
* sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
*
* @host: Pointer to the sdhci_host structure.
* @degrees: The clock phase shift between 0 - 359.
* Return: 0
*
* Set the SD Output Clock Tap Delays for Output path
*/
static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host,
int degrees)
{
struct mmc *mmc = (struct mmc *)host->mmc;
struct udevice *dev = mmc->dev;
struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
u8 tap_delay, tap_max = 0;
int timing = mode2timing[mmc->selected_mode];
int ret;
/*
* This is applicable for SDHCI_SPEC_300 and above
* ZynqMP does not set phase for <=25MHz clock.
* If degrees is zero, no need to do anything.
*/
if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300)
return 0;
switch (timing) {
case MMC_TIMING_MMC_HS:
case MMC_TIMING_SD_HS:
case MMC_TIMING_UHS_SDR25:
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
/* For 50MHz clock, 30 Taps are available */
tap_max = 30;
break;
case MMC_TIMING_UHS_SDR50:
/* For 100MHz clock, 15 Taps are available */
tap_max = 15;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
/* For 200MHz clock, 8 Taps are available */
tap_max = 8;
default:
break;
}
tap_delay = (degrees * tap_max) / 360;
/* Limit output tap_delay value to 6 bits */
tap_delay &= SDHCI_ARASAN_OTAPDLY_SEL_MASK;
/* Set the Clock Phase */
ret = arasan_zynqmp_set_out_tapdelay(priv->node_id, tap_delay);
if (ret) {
dev_err(dev, "Error setting output Tap Delay\n");
return ret;
}
/* Release DLL Reset */
ret = zynqmp_dll_reset(priv->node_id, PM_DLL_RESET_RELEASE);
if (ret) {
dev_err(dev, "dll_reset release failed with err: %d\n", ret);
return ret;
}
return 0;
}
/**
* sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
*
* @host: Pointer to the sdhci_host structure.
* @degrees: The clock phase shift between 0 - 359.
* Return: 0
*
* Set the SD Input Clock Tap Delays for Input path
*/
static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
int degrees)
{
struct mmc *mmc = (struct mmc *)host->mmc;
struct udevice *dev = mmc->dev;
struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
u8 tap_delay, tap_max = 0;
int timing = mode2timing[mmc->selected_mode];
int ret;
/*
* This is applicable for SDHCI_SPEC_300 and above
* ZynqMP does not set phase for <=25MHz clock.
* If degrees is zero, no need to do anything.
*/
if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300)
return 0;
/* Assert DLL Reset */
ret = zynqmp_dll_reset(priv->node_id, PM_DLL_RESET_ASSERT);
if (ret) {
dev_err(dev, "dll_reset assert failed with err: %d\n", ret);
return ret;
}
switch (timing) {
case MMC_TIMING_MMC_HS:
case MMC_TIMING_SD_HS:
case MMC_TIMING_UHS_SDR25:
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
/* For 50MHz clock, 120 Taps are available */
tap_max = 120;
break;
case MMC_TIMING_UHS_SDR50:
/* For 100MHz clock, 60 Taps are available */
tap_max = 60;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
/* For 200MHz clock, 30 Taps are available */
tap_max = 30;
default:
break;
}
tap_delay = (degrees * tap_max) / 360;
/* Limit input tap_delay value to 8 bits */
tap_delay &= SDHCI_ARASAN_ITAPDLY_SEL_MASK;
ret = arasan_zynqmp_set_in_tapdelay(priv->node_id, tap_delay);
if (ret) {
dev_err(dev, "Error setting Input Tap Delay\n");
return ret;
}
return 0;
}
/**
* sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
*
* @host: Pointer to the sdhci_host structure.
* @degrees: The clock phase shift between 0 - 359.
* Return: 0
*
* Set the SD Output Clock Tap Delays for Output path
*/
static int sdhci_versal_sdcardclk_set_phase(struct sdhci_host *host,
int degrees)
{
struct mmc *mmc = (struct mmc *)host->mmc;
u8 tap_delay, tap_max = 0;
int timing = mode2timing[mmc->selected_mode];
u32 regval;
/*
* This is applicable for SDHCI_SPEC_300 and above
* Versal does not set phase for <=25MHz clock.
* If degrees is zero, no need to do anything.
*/
if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300)
return 0;
switch (timing) {
case MMC_TIMING_MMC_HS:
case MMC_TIMING_SD_HS:
case MMC_TIMING_UHS_SDR25:
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
/* For 50MHz clock, 30 Taps are available */
tap_max = 30;
break;
case MMC_TIMING_UHS_SDR50:
/* For 100MHz clock, 15 Taps are available */
tap_max = 15;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
/* For 200MHz clock, 8 Taps are available */
tap_max = 8;
default:
break;
}
tap_delay = (degrees * tap_max) / 360;
/* Limit output tap_delay value to 6 bits */
tap_delay &= SDHCI_ARASAN_OTAPDLY_SEL_MASK;
/* Set the Clock Phase */
regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
regval |= SDHCI_OTAPDLY_ENABLE;
sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
regval &= ~SDHCI_ARASAN_OTAPDLY_SEL_MASK;
regval |= tap_delay;
sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
return 0;
}
/**
* sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
*
* @host: Pointer to the sdhci_host structure.
* @degrees: The clock phase shift between 0 - 359.
* Return: 0
*
* Set the SD Input Clock Tap Delays for Input path
*/
static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host,
int degrees)
{
struct mmc *mmc = (struct mmc *)host->mmc;
u8 tap_delay, tap_max = 0;
int timing = mode2timing[mmc->selected_mode];
u32 regval;
/*
* This is applicable for SDHCI_SPEC_300 and above
* Versal does not set phase for <=25MHz clock.
* If degrees is zero, no need to do anything.
*/
if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300)
return 0;
switch (timing) {
case MMC_TIMING_MMC_HS:
case MMC_TIMING_SD_HS:
case MMC_TIMING_UHS_SDR25:
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
/* For 50MHz clock, 120 Taps are available */
tap_max = 120;
break;
case MMC_TIMING_UHS_SDR50:
/* For 100MHz clock, 60 Taps are available */
tap_max = 60;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
/* For 200MHz clock, 30 Taps are available */
tap_max = 30;
default:
break;
}
tap_delay = (degrees * tap_max) / 360;
/* Limit input tap_delay value to 8 bits */
tap_delay &= SDHCI_ARASAN_ITAPDLY_SEL_MASK;
/* Set the Clock Phase */
regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
regval |= SDHCI_ITAPDLY_CHGWIN;
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
regval |= SDHCI_ITAPDLY_ENABLE;
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
regval &= ~SDHCI_ARASAN_ITAPDLY_SEL_MASK;
regval |= tap_delay;
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
regval &= ~SDHCI_ITAPDLY_CHGWIN;
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
return 0;
}
static int arasan_sdhci_set_tapdelay(struct sdhci_host *host)
{
struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
struct mmc *mmc = (struct mmc *)host->mmc;
struct udevice *dev = mmc->dev;
u8 timing = mode2timing[mmc->selected_mode];
u32 iclk_phase = clk_data->clk_phase_in[timing];
u32 oclk_phase = clk_data->clk_phase_out[timing];
int ret;
dev_dbg(dev, "%s, host:%s, mode:%d\n", __func__, host->name, timing);
if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
ret = sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
if (ret)
return ret;
ret = sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
if (ret)
return ret;
} else if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
device_is_compatible(dev, "xlnx,versal-8.9a")) {
ret = sdhci_versal_sampleclk_set_phase(host, iclk_phase);
if (ret)
return ret;
ret = sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
if (ret)
return ret;
}
return 0;
}
static void arasan_dt_read_clk_phase(struct udevice *dev, unsigned char timing,
const char *prop)
{
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
u32 clk_phase[2] = {0};
/*
* Read Tap Delay values from DT, if the DT does not contain the
* Tap Values then use the pre-defined values
*/
if (dev_read_u32_array(dev, prop, &clk_phase[0], 2)) {
dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
prop, clk_data->clk_phase_in[timing],
clk_data->clk_phase_out[timing]);
return;
}
/* The values read are Input and Output Clock Delays in order */
clk_data->clk_phase_in[timing] = clk_phase[0];
clk_data->clk_phase_out[timing] = clk_phase[1];
}
/**
* arasan_dt_parse_clk_phases - Read Tap Delay values from DT
*
* @dev: Pointer to our struct udevice.
*
* Called at initialization to parse the values of Tap Delays.
*/
static void arasan_dt_parse_clk_phases(struct udevice *dev)
{
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
int i;
if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
clk_data->clk_phase_in[i] = zynqmp_iclk_phases[i];
clk_data->clk_phase_out[i] = zynqmp_oclk_phases[i];
}
if (priv->bank == MMC_BANK2) {
clk_data->clk_phase_out[MMC_TIMING_UHS_SDR104] = 90;
clk_data->clk_phase_out[MMC_TIMING_MMC_HS200] = 90;
}
}
if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
device_is_compatible(dev, "xlnx,versal-8.9a")) {
for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
clk_data->clk_phase_in[i] = versal_iclk_phases[i];
clk_data->clk_phase_out[i] = versal_oclk_phases[i];
}
}
arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY,
"clk-phase-legacy");
arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS,
"clk-phase-mmc-hs");
arasan_dt_read_clk_phase(dev, MMC_TIMING_SD_HS,
"clk-phase-sd-hs");
arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR12,
"clk-phase-uhs-sdr12");
arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR25,
"clk-phase-uhs-sdr25");
arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR50,
"clk-phase-uhs-sdr50");
arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR104,
"clk-phase-uhs-sdr104");
arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_DDR50,
"clk-phase-uhs-ddr50");
arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_DDR52,
"clk-phase-mmc-ddr52");
arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS200,
"clk-phase-mmc-hs200");
arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS400,
"clk-phase-mmc-hs400");
}
static const struct sdhci_ops arasan_ops = {
.platform_execute_tuning = &arasan_sdhci_execute_tuning,
.set_delay = &arasan_sdhci_set_tapdelay,
.set_control_reg = &sdhci_set_control_reg,
};
#endif
#if defined(CONFIG_ARCH_ZYNQMP)
static int sdhci_zynqmp_set_dynamic_config(struct arasan_sdhci_priv *priv,
struct udevice *dev)
{
int ret;
struct clk clk;
unsigned long clock, mhz;
ret = xilinx_pm_request(PM_REQUEST_NODE, priv->node_id,
ZYNQMP_PM_CAPABILITY_ACCESS, ZYNQMP_PM_MAX_QOS,
ZYNQMP_PM_REQUEST_ACK_NO, NULL);
if (ret) {
dev_err(dev, "Request node failed for %d\n", priv->node_id);
return ret;
}
ret = reset_get_bulk(dev, &priv->resets);
if (ret == -ENOTSUPP || ret == -ENOENT) {
dev_err(dev, "Reset not found\n");
return 0;
} else if (ret) {
dev_err(dev, "Reset failed\n");
return ret;
}
ret = reset_assert_bulk(&priv->resets);
if (ret) {
dev_err(dev, "Reset assert failed\n");
return ret;
}
ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_FIXED, 0);
if (ret) {
dev_err(dev, "SD_CONFIG_FIXED failed\n");
return ret;
}
ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_EMMC_SEL,
dev_read_bool(dev, "non-removable"));
if (ret) {
dev_err(dev, "SD_CONFIG_EMMC_SEL failed\n");
return ret;
}
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0) {
dev_err(dev, "failed to get clock\n");
return ret;
}
clock = clk_get_rate(&clk);
if (IS_ERR_VALUE(clock)) {
dev_err(dev, "failed to get rate\n");
return clock;
}
mhz = DIV64_U64_ROUND_UP(clock, 1000000);
if (mhz > 100 && mhz <= 200)
mhz = 200;
else if (mhz > 50 && mhz <= 100)
mhz = 100;
else if (mhz > 25 && mhz <= 50)
mhz = 50;
else
mhz = 25;
ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_BASECLK, mhz);
if (ret) {
dev_err(dev, "SD_CONFIG_BASECLK failed\n");
return ret;
}
ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_8BIT,
(dev_read_u32_default(dev, "bus-width", 1) == 8));
if (ret) {
dev_err(dev, "SD_CONFIG_8BIT failed\n");
return ret;
}
ret = reset_deassert_bulk(&priv->resets);
if (ret) {
dev_err(dev, "Reset release failed\n");
return ret;
}
return 0;
}
#endif
static int arasan_sdhci_probe(struct udevice *dev)
{
struct arasan_sdhci_plat *plat = dev_get_plat(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
struct sdhci_host *host;
struct clk clk;
unsigned long clock;
int ret;
host = priv->host;
#if defined(CONFIG_ARCH_ZYNQMP)
if (device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
ret = zynqmp_pm_is_function_supported(PM_IOCTL,
IOCTL_SET_SD_CONFIG);
if (!ret) {
ret = sdhci_zynqmp_set_dynamic_config(priv, dev);
if (ret)
return ret;
}
}
#endif
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0) {
dev_err(dev, "failed to get clock\n");
return ret;
}
clock = clk_get_rate(&clk);
if (IS_ERR_VALUE(clock)) {
dev_err(dev, "failed to get rate\n");
return clock;
}
dev_dbg(dev, "%s: CLK %ld\n", __func__, clock);
ret = clk_enable(&clk);
if (ret) {
dev_err(dev, "failed to enable clock\n");
return ret;
}
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
SDHCI_QUIRK_BROKEN_R1B;
#ifdef CONFIG_ZYNQ_HISPD_BROKEN
host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
#endif
if (priv->no_1p8)
host->quirks |= SDHCI_QUIRK_NO_1_8_V;
plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
ret = mmc_of_parse(dev, &plat->cfg);
if (ret)
return ret;
host->max_clk = clock;
host->mmc = &plat->mmc;
host->mmc->dev = dev;
host->mmc->priv = host;
ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max,
CONFIG_ZYNQ_SDHCI_MIN_FREQ);
if (ret)
return ret;
upriv->mmc = host->mmc;
/*
* WORKAROUND: Versal platforms have an issue with card detect state.
* Due to this, host controller is switching off voltage to sd card
* causing sd card timeout error. Workaround this by adding a wait for
* 1000msec till the card detect state gets stable.
*/
if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) || IS_ENABLED(CONFIG_ARCH_VERSAL)) {
u32 timeout = 1000000;
while (((sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_STATE_STABLE) == 0) && timeout) {
udelay(1);
timeout--;
}
if (!timeout) {
dev_err(dev, "Sdhci card detect state not stable\n");
return -ETIMEDOUT;
}
}
return sdhci_probe(dev);
}
static int arasan_sdhci_of_to_plat(struct udevice *dev)
{
struct arasan_sdhci_priv *priv = dev_get_priv(dev);
u32 pm_info[2];
priv->host = calloc(1, sizeof(struct sdhci_host));
if (!priv->host)
return -1;
priv->host->name = dev->name;
#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
priv->host->ops = &arasan_ops;
arasan_dt_parse_clk_phases(dev);
#endif
priv->host->ioaddr = (void *)dev_read_addr(dev);
if (IS_ERR(priv->host->ioaddr))
return PTR_ERR(priv->host->ioaddr);
priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0);
priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");
priv->node_id = 0;
if (!dev_read_u32_array(dev, "power-domains", pm_info, ARRAY_SIZE(pm_info)))
priv->node_id = pm_info[1];
return 0;
}
static int arasan_sdhci_bind(struct udevice *dev)
{
struct arasan_sdhci_plat *plat = dev_get_plat(dev);
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct udevice_id arasan_sdhci_ids[] = {
{ .compatible = "arasan,sdhci-8.9a" },
{ }
};
U_BOOT_DRIVER(arasan_sdhci_drv) = {
.name = "arasan_sdhci",
.id = UCLASS_MMC,
.of_match = arasan_sdhci_ids,
.of_to_plat = arasan_sdhci_of_to_plat,
.ops = &sdhci_ops,
.bind = arasan_sdhci_bind,
.probe = arasan_sdhci_probe,
.priv_auto = sizeof(struct arasan_sdhci_priv),
.plat_auto = sizeof(struct arasan_sdhci_plat),
};
|