summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie_imx.c
blob: 90a34063b014ed5a1001ebd631b378421b6da304 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
/*
 * Freescale i.MX6 PCI Express Root-Complex driver
 *
 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
 *
 * Based on upstream Linux kernel driver:
 * pci-imx6.c:		Sean Cross <xobs@kosagi.com>
 * pcie-designware.c:	Jingoo Han <jg1.han@samsung.com>
 *
 * SPDX-License-Identifier:	GPL-2.0
 */

#include <common.h>
#include <pci.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/crm_regs.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <errno.h>
#include <asm/arch/sys_proto.h>

#define PCI_ACCESS_READ  0
#define PCI_ACCESS_WRITE 1

#ifdef CONFIG_MX6SX
#define MX6_DBI_ADDR	0x08ffc000
#define MX6_IO_ADDR	0x08000000
#define MX6_MEM_ADDR	0x08100000
#define MX6_ROOT_ADDR	0x08f00000
#else
#define MX6_DBI_ADDR	0x01ffc000
#define MX6_IO_ADDR	0x01000000
#define MX6_MEM_ADDR	0x01100000
#define MX6_ROOT_ADDR	0x01f00000
#endif
#define MX6_DBI_SIZE	0x4000
#define MX6_IO_SIZE	0x100000
#define MX6_MEM_SIZE	0xe00000
#define MX6_ROOT_SIZE	0xfc000

/* PCIe Port Logic registers (memory-mapped) */
#define PL_OFFSET 0x700
#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
#define PCIE_PL_PFLR_LINK_STATE_MASK		(0x3f << 16)
#define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
#define PCIE_PHY_DEBUG_R1_LINK_UP		(1 << 4)
#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING	(1 << 29)

#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
#define PCIE_PHY_CTRL_DATA_LOC 0
#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
#define PCIE_PHY_CTRL_WR_LOC 18
#define PCIE_PHY_CTRL_RD_LOC 19

#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
#define PCIE_PHY_STAT_DATA_LOC 0
#define PCIE_PHY_STAT_ACK_LOC 16

/* PHY registers (not memory-mapped) */
#define PCIE_PHY_RX_ASIC_OUT 0x100D

#define PHY_RX_OVRD_IN_LO 0x1005
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)

#define PCIE_PHY_PUP_REQ		(1 << 7)

/* iATU registers */
#define PCIE_ATU_VIEWPORT		0x900
#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
#define PCIE_ATU_CR1			0x904
#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
#define PCIE_ATU_TYPE_IO		(0x2 << 0)
#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
#define PCIE_ATU_CR2			0x908
#define PCIE_ATU_ENABLE			(0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
#define PCIE_ATU_LOWER_BASE		0x90C
#define PCIE_ATU_UPPER_BASE		0x910
#define PCIE_ATU_LIMIT			0x914
#define PCIE_ATU_LOWER_TARGET		0x918
#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET		0x91C

/*
 * PHY access functions
 */
static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
{
	u32 val;
	u32 max_iterations = 10;
	u32 wait_counter = 0;

	do {
		val = readl(dbi_base + PCIE_PHY_STAT);
		val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
		wait_counter++;

		if (val == exp_val)
			return 0;

		udelay(1);
	} while (wait_counter < max_iterations);

	return -ETIMEDOUT;
}

static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
{
	u32 val;
	int ret;

	val = addr << PCIE_PHY_CTRL_DATA_LOC;
	writel(val, dbi_base + PCIE_PHY_CTRL);

	val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
	writel(val, dbi_base + PCIE_PHY_CTRL);

	ret = pcie_phy_poll_ack(dbi_base, 1);
	if (ret)
		return ret;

	val = addr << PCIE_PHY_CTRL_DATA_LOC;
	writel(val, dbi_base + PCIE_PHY_CTRL);

	ret = pcie_phy_poll_ack(dbi_base, 0);
	if (ret)
		return ret;

	return 0;
}

/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
{
	u32 val, phy_ctl;
	int ret;

	ret = pcie_phy_wait_ack(dbi_base, addr);
	if (ret)
		return ret;

	/* assert Read signal */
	phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
	writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);

	ret = pcie_phy_poll_ack(dbi_base, 1);
	if (ret)
		return ret;

	val = readl(dbi_base + PCIE_PHY_STAT);
	*data = val & 0xffff;

	/* deassert Read signal */
	writel(0x00, dbi_base + PCIE_PHY_CTRL);

	ret = pcie_phy_poll_ack(dbi_base, 0);
	if (ret)
		return ret;

	return 0;
}

static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
{
	u32 var;
	int ret;

	/* write addr */
	/* cap addr */
	ret = pcie_phy_wait_ack(dbi_base, addr);
	if (ret)
		return ret;

	var = data << PCIE_PHY_CTRL_DATA_LOC;
	writel(var, dbi_base + PCIE_PHY_CTRL);

	/* capture data */
	var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
	writel(var, dbi_base + PCIE_PHY_CTRL);

	ret = pcie_phy_poll_ack(dbi_base, 1);
	if (ret)
		return ret;

	/* deassert cap data */
	var = data << PCIE_PHY_CTRL_DATA_LOC;
	writel(var, dbi_base + PCIE_PHY_CTRL);

	/* wait for ack de-assertion */
	ret = pcie_phy_poll_ack(dbi_base, 0);
	if (ret)
		return ret;

	/* assert wr signal */
	var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
	writel(var, dbi_base + PCIE_PHY_CTRL);

	/* wait for ack */
	ret = pcie_phy_poll_ack(dbi_base, 1);
	if (ret)
		return ret;

	/* deassert wr signal */
	var = data << PCIE_PHY_CTRL_DATA_LOC;
	writel(var, dbi_base + PCIE_PHY_CTRL);

	/* wait for ack de-assertion */
	ret = pcie_phy_poll_ack(dbi_base, 0);
	if (ret)
		return ret;

	writel(0x0, dbi_base + PCIE_PHY_CTRL);

	return 0;
}

static int imx6_pcie_link_up(void)
{
	u32 rc, ltssm;
	int rx_valid, temp;

	/* link is debug bit 36, debug register 1 starts at bit 32 */
	rc = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1);
	if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) &&
	    !(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING))
		return -EAGAIN;

	/*
	 * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
	 * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
	 * If (MAC/LTSSM.state == Recovery.RcvrLock)
	 * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
	 * to gen2 is stuck
	 */
	pcie_phy_read((void *)MX6_DBI_ADDR, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
	ltssm = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0) & 0x3F;

	if (rx_valid & 0x01)
		return 0;

	if (ltssm != 0x0d)
		return 0;

	printf("transition to gen2 is stuck, reset PHY!\n");

	pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
	temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
	pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);

	udelay(3000);

	pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
	temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
	pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);

	return 0;
}

/*
 * iATU region setup
 */
static int imx_pcie_regions_setup(void)
{
	/*
	 * i.MX6 defines 16MB in the AXI address map for PCIe.
	 *
	 * That address space excepted the pcie registers is
	 * split and defined into different regions by iATU,
	 * with sizes and offsets as follows:
	 *
	 * 0x0100_0000 --- 0x010F_FFFF 1MB IORESOURCE_IO
	 * 0x0110_0000 --- 0x01EF_FFFF 14MB IORESOURCE_MEM
	 * 0x01F0_0000 --- 0x01FF_FFFF 1MB Cfg + Registers
	 */

	/* CMD reg:I/O space, MEM space, and Bus Master Enable */
	setbits_le32(MX6_DBI_ADDR | PCI_COMMAND,
		     PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);

	/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
	setbits_le32(MX6_DBI_ADDR + PCI_CLASS_REVISION,
		     PCI_CLASS_BRIDGE_PCI << 16);

	/* Region #0 is used for Outbound CFG space access. */
	writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);

	writel(MX6_ROOT_ADDR, MX6_DBI_ADDR + PCIE_ATU_LOWER_BASE);
	writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_BASE);
	writel(MX6_ROOT_ADDR + MX6_ROOT_SIZE, MX6_DBI_ADDR + PCIE_ATU_LIMIT);

	writel(0, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
	writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_TARGET);
	writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
	writel(PCIE_ATU_ENABLE, MX6_DBI_ADDR + PCIE_ATU_CR2);

	return 0;
}

/*
 * PCI Express accessors
 */
static uint32_t get_bus_address(pci_dev_t d, int where)
{
	uint32_t va_address;

	/* Reconfigure Region #0 */
	writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);

	if (PCI_BUS(d) < 2)
		writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
	else
		writel(PCIE_ATU_TYPE_CFG1, MX6_DBI_ADDR + PCIE_ATU_CR1);

	if (PCI_BUS(d) == 0) {
		va_address = MX6_DBI_ADDR;
	} else {
		writel(d << 8, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
		va_address = MX6_IO_ADDR + SZ_16M - SZ_1M;
	}

	va_address += (where & ~0x3);

	return va_address;
}

static int imx_pcie_addr_valid(pci_dev_t d)
{
	if ((PCI_BUS(d) == 0) && (PCI_DEV(d) > 1))
		return -EINVAL;
	if ((PCI_BUS(d) == 1) && (PCI_DEV(d) > 0))
		return -EINVAL;
	return 0;
}

/*
 * Replace the original ARM DABT handler with a simple jump-back one.
 *
 * The problem here is that if we have a PCIe bridge attached to this PCIe
 * controller, but no PCIe device is connected to the bridges' downstream
 * port, the attempt to read/write from/to the config space will produce
 * a DABT. This is a behavior of the controller and can not be disabled
 * unfortuatelly.
 *
 * To work around the problem, we backup the current DABT handler address
 * and replace it with our own DABT handler, which only bounces right back
 * into the code.
 */
static void imx_pcie_fix_dabt_handler(bool set)
{
	extern uint32_t *_data_abort;
	uint32_t *data_abort_addr = (uint32_t *)&_data_abort;

	static const uint32_t data_abort_bounce_handler = 0xe25ef004;
	uint32_t data_abort_bounce_addr = (uint32_t)&data_abort_bounce_handler;

	static uint32_t data_abort_backup;

	if (set) {
		data_abort_backup = *data_abort_addr;
		*data_abort_addr = data_abort_bounce_addr;
	} else {
		*data_abort_addr = data_abort_backup;
	}
}

static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
				int where, u32 *val)
{
	uint32_t va_address;
	int ret;

	ret = imx_pcie_addr_valid(d);
	if (ret) {
		*val = 0xffffffff;
		return 0;
	}

	va_address = get_bus_address(d, where);

	/*
	 * Read the PCIe config space. We must replace the DABT handler
	 * here in case we got data abort from the PCIe controller, see
	 * imx_pcie_fix_dabt_handler() description. Note that writing the
	 * "val" with valid value is also imperative here as in case we
	 * did got DABT, the val would contain random value.
	 */
	imx_pcie_fix_dabt_handler(true);
	writel(0xffffffff, val);
	*val = readl(va_address);
	imx_pcie_fix_dabt_handler(false);

	return 0;
}

static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
			int where, u32 val)
{
	uint32_t va_address = 0;
	int ret;

	ret = imx_pcie_addr_valid(d);
	if (ret)
		return ret;

	va_address = get_bus_address(d, where);

	/*
	 * Write the PCIe config space. We must replace the DABT handler
	 * here in case we got data abort from the PCIe controller, see
	 * imx_pcie_fix_dabt_handler() description.
	 */
	imx_pcie_fix_dabt_handler(true);
	writel(val, va_address);
	imx_pcie_fix_dabt_handler(false);

	return 0;
}

/*
 * Initial bus setup
 */
static int imx6_pcie_assert_core_reset(bool prepare_for_boot)
{
	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;

	if (is_mx6dqp())
		setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);

#if defined(CONFIG_MX6SX)
	struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR;

	/* SSP_EN is not used on MX6SX anymore */
	setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
	/* Force PCIe PHY reset */
	setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
	/* Power up PCIe PHY */
	setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ);
#else
	/*
	 * If the bootloader already enabled the link we need some special
	 * handling to get the core back into a state where it is safe to
	 * touch it for configuration.  As there is no dedicated reset signal
	 * wired up for MX6QDL, we need to manually force LTSSM into "detect"
	 * state before completely disabling LTSSM, which is a prerequisite
	 * for core configuration.
	 *
	 * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
	 * indication that the bootloader activated the link.
	 */
	if (is_mx6dq() && prepare_for_boot) {
		u32 val, gpr1, gpr12;

		gpr1 = readl(&iomuxc_regs->gpr[1]);
		gpr12 = readl(&iomuxc_regs->gpr[12]);
		if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) &&
		    (gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) {
			val = readl(MX6_DBI_ADDR + PCIE_PL_PFLR);
			val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
			val |= PCIE_PL_PFLR_FORCE_LINK;

			imx_pcie_fix_dabt_handler(true);
			writel(val, MX6_DBI_ADDR + PCIE_PL_PFLR);
			imx_pcie_fix_dabt_handler(false);

			gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2;
			writel(val, &iomuxc_regs->gpr[12]);
		}
	}
	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
	clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
#endif

	return 0;
}

static int imx6_pcie_init_phy(void)
{
	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;

	clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);

	clrsetbits_le32(&iomuxc_regs->gpr[12],
			IOMUXC_GPR12_DEVICE_TYPE_MASK,
			IOMUXC_GPR12_DEVICE_TYPE_RC);
	clrsetbits_le32(&iomuxc_regs->gpr[12],
			IOMUXC_GPR12_LOS_LEVEL_MASK,
			IOMUXC_GPR12_LOS_LEVEL_9);

#ifdef CONFIG_MX6SX
	clrsetbits_le32(&iomuxc_regs->gpr[12],
			IOMUXC_GPR12_RX_EQ_MASK,
			IOMUXC_GPR12_RX_EQ_2);
#endif

	writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) |
	       (0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) |
	       (20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) |
	       (127 << IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET) |
	       (127 << IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET),
	       &iomuxc_regs->gpr[8]);

	return 0;
}

__weak int imx6_pcie_toggle_power(void)
{
#ifdef CONFIG_PCIE_IMX_POWER_GPIO
	gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
	gpio_direction_output(CONFIG_PCIE_IMX_POWER_GPIO, 0);
	mdelay(20);
	gpio_set_value(CONFIG_PCIE_IMX_POWER_GPIO, 1);
	mdelay(20);
	gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
#endif
	return 0;
}

__weak int imx6_pcie_toggle_reset(void)
{
	/*
	 * See 'PCI EXPRESS BASE SPECIFICATION, REV 3.0, SECTION 6.6.1'
	 * for detailed understanding of the PCIe CR reset logic.
	 *
	 * The PCIe #PERST reset line _MUST_ be connected, otherwise your
	 * design does not conform to the specification. You must wait at
	 * least 20 ms after de-asserting the #PERST so the EP device can
	 * do self-initialisation.
	 *
	 * In case your #PERST pin is connected to a plain GPIO pin of the
	 * CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's
	 * configuration file and the condition below will handle the rest
	 * of the reset toggling.
	 *
	 * In case your #PERST toggling logic is more complex, for example
	 * connected via CPLD or somesuch, you can override this function
	 * in your board file and implement reset logic as needed. You must
	 * not forget to wait at least 20 ms after de-asserting #PERST in
	 * this case either though.
	 *
	 * In case your #PERST line of the PCIe EP device is not connected
	 * at all, your design is broken and you should fix your design,
	 * otherwise you will observe problems like for example the link
	 * not coming up after rebooting the system back from running Linux
	 * that uses the PCIe as well OR the PCIe link might not come up in
	 * Linux at all in the first place since it's in some non-reset
	 * state due to being previously used in U-Boot.
	 */
#ifdef CONFIG_PCIE_IMX_PERST_GPIO
	gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset");
	gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0);
	mdelay(20);
	gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1);
	mdelay(20);
	gpio_free(CONFIG_PCIE_IMX_PERST_GPIO);
#else
	puts("WARNING: Make sure the PCIe #PERST line is connected!\n");
#endif
	return 0;
}

static int imx6_pcie_deassert_core_reset(void)
{
	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;

	imx6_pcie_toggle_power();

	enable_pcie_clock();

	if (is_mx6dqp())
		clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);

	/*
	 * Wait for the clock to settle a bit, when the clock are sourced
	 * from the CPU, we need about 30 ms to settle.
	 */
	mdelay(50);

#if defined(CONFIG_MX6SX)
	/* SSP_EN is not used on MX6SX anymore */
	clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
	/* Clear PCIe PHY reset bit */
	clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
#else
	/* Enable PCIe */
	clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
#endif

	imx6_pcie_toggle_reset();

	return 0;
}

static int imx_pcie_link_up(void)
{
	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
	uint32_t tmp;
	int count = 0;

	imx6_pcie_assert_core_reset(false);
	imx6_pcie_init_phy();
	imx6_pcie_deassert_core_reset();

	imx_pcie_regions_setup();

	/*
	 * FIXME: Force the PCIe RC to Gen1 operation
	 * The RC must be forced into Gen1 mode before bringing the link
	 * up, otherwise no downstream devices are detected. After the
	 * link is up, a managed Gen1->Gen2 transition can be initiated.
	 */
	tmp = readl(MX6_DBI_ADDR + 0x7c);
	tmp &= ~0xf;
	tmp |= 0x1;
	writel(tmp, MX6_DBI_ADDR + 0x7c);

	/* LTSSM enable, starting link. */
	setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);

	while (!imx6_pcie_link_up()) {
		udelay(10);
		count++;
		if (count >= 4000) {
#ifdef CONFIG_PCI_SCAN_SHOW
			puts("PCI:   pcie phy link never came up\n");
#endif
			debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
			      readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0),
			      readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1));
			return -EINVAL;
		}
	}

	return 0;
}

void imx_pcie_init(void)
{
	/* Static instance of the controller. */
	static struct pci_controller	pcc;
	struct pci_controller		*hose = &pcc;
	int ret;

	memset(&pcc, 0, sizeof(pcc));

	/* PCI I/O space */
	pci_set_region(&hose->regions[0],
		       MX6_IO_ADDR, MX6_IO_ADDR,
		       MX6_IO_SIZE, PCI_REGION_IO);

	/* PCI memory space */
	pci_set_region(&hose->regions[1],
		       MX6_MEM_ADDR, MX6_MEM_ADDR,
		       MX6_MEM_SIZE, PCI_REGION_MEM);

	/* System memory space */
	pci_set_region(&hose->regions[2],
		       MMDC0_ARB_BASE_ADDR, MMDC0_ARB_BASE_ADDR,
		       0xefffffff, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);

	hose->region_count = 3;

	pci_set_ops(hose,
		    pci_hose_read_config_byte_via_dword,
		    pci_hose_read_config_word_via_dword,
		    imx_pcie_read_config,
		    pci_hose_write_config_byte_via_dword,
		    pci_hose_write_config_word_via_dword,
		    imx_pcie_write_config);

	/* Start the controller. */
	ret = imx_pcie_link_up();

	if (!ret) {
		pci_register_hose(hose);
		hose->last_busno = pci_hose_scan(hose);
	}
}

void imx_pcie_remove(void)
{
	imx6_pcie_assert_core_reset(true);
}

/* Probe function. */
void pci_init_board(void)
{
	imx_pcie_init();
}