summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/rockchip/pinctrl-rk3188.c
blob: afde80985450624bbf3ca6cd9aca48648d09ace1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2019 Rockchip Electronics Co., Ltd
 */

#include <common.h>
#include <dm.h>
#include <log.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>

#include "pinctrl-rockchip.h"

static int rk3188_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
	struct rockchip_pinctrl_priv *priv = bank->priv;
	int iomux_num = (pin / 8);
	struct regmap *regmap;
	int reg, ret, mask, mux_type;
	u8 bit;
	u32 data;

	regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
				? priv->regmap_pmu : priv->regmap_base;

	/* get basic quadrupel of mux registers and the correct reg inside */
	mux_type = bank->iomux[iomux_num].type;
	reg = bank->iomux[iomux_num].offset;
	reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);

	data = (mask << (bit + 16));
	data |= (mux & mask) << bit;
	ret = regmap_write(regmap, reg, data);

	return ret;
}

#define RK3188_PULL_OFFSET		0x164
#define RK3188_PULL_PMU_OFFSET		0x64

static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
					 int pin_num, struct regmap **regmap,
					 int *reg, u8 *bit)
{
	struct rockchip_pinctrl_priv *priv = bank->priv;

	/* The first 12 pins of the first bank are located elsewhere */
	if (bank->bank_num == 0 && pin_num < 12) {
		*regmap = priv->regmap_pmu;
		*reg = RK3188_PULL_PMU_OFFSET;

		*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
		*bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG;
		*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
	} else {
		*regmap = priv->regmap_base;
		*reg = RK3188_PULL_OFFSET;

		/* correct the offset, as it is the 2nd pull register */
		*reg -= 4;
		*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
		*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);

		/*
		 * The bits in these registers have an inverse ordering
		 * with the lowest pin being in bits 15:14 and the highest
		 * pin in bits 1:0
		 */
		*bit = 7 - (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
		*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
	}
}

static int rk3188_set_pull(struct rockchip_pin_bank *bank,
			   int pin_num, int pull)
{
	struct regmap *regmap;
	int reg, ret;
	u8 bit, type;
	u32 data;

	if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
		return -ENOTSUPP;

	rk3188_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
	type = bank->pull_type[pin_num / 8];
	ret = rockchip_translate_pull_value(type, pull);
	if (ret < 0) {
		debug("unsupported pull setting %d\n", pull);
		return ret;
	}

	/* enable the write to the equivalent lower bits */
	data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
	data |= (ret << bit);
	ret = regmap_write(regmap, reg, data);

	return ret;
}

static struct rockchip_pin_bank rk3188_pin_banks[] = {
	PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0),
	PIN_BANK(1, 32, "gpio1"),
	PIN_BANK(2, 32, "gpio2"),
	PIN_BANK(3, 32, "gpio3"),
};

static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
	.pin_banks		= rk3188_pin_banks,
	.nr_banks		= ARRAY_SIZE(rk3188_pin_banks),
	.grf_mux_offset		= 0x60,
	.set_mux		= rk3188_set_mux,
	.set_pull		= rk3188_set_pull,
};

static const struct udevice_id rk3188_pinctrl_ids[] = {
	{ .compatible = "rockchip,rk3188-pinctrl",
		.data = (ulong)&rk3188_pin_ctrl },
	{ }
};

U_BOOT_DRIVER(pinctrl_rk3188) = {
	.name		= "rockchip_rk3188_pinctrl",
	.id		= UCLASS_PINCTRL,
	.of_match	= rk3188_pinctrl_ids,
	.priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv),
	.ops		= &rockchip_pinctrl_ops,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
	.bind		= dm_scan_fdt_dev,
#endif
	.probe		= rockchip_pinctrl_probe,
};