summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLuc Verhaegen <libv@skynet.be>2019-04-13 23:02:21 +0300
committerLuc Verhaegen <libv@skynet.be>2019-04-13 23:02:21 +0300
commitefa6fb589de5a6a0d45944cf482f42fc324d94d4 (patch)
tree5e3873aba76b09d469abac30877837417a509a02
parent2496c57857e2f3127f53d29da44eed71cdabc664 (diff)
downloadsunxi-boards-efa6fb589de5a6a0d45944cf482f42fc324d94d4.tar.xz
a20: add marsboard a20
From http://www.haoyuelectronics.com/marsboard/marsboard-a20-md5sum-c668f869bc0b88c98d50f212bb7d28e6.tar.gz
-rw-r--r--sys_config/a20/marsboard_a20.fex1283
1 files changed, 1283 insertions, 0 deletions
diff --git a/sys_config/a20/marsboard_a20.fex b/sys_config/a20/marsboard_a20.fex
new file mode 100644
index 0000000..57501aa
--- /dev/null
+++ b/sys_config/a20/marsboard_a20.fex
@@ -0,0 +1,1283 @@
+;A20 PAD application
+;-------------------------------------------------------------------------------
+; 说明:
+; 1. 脚本中的字符串区分大小写,用户可以修改"="后面的数值,但是不要修改前面的字符串
+; 2. 新增主键和子键的名称必须控制在32个字符以内,不包括32个
+; 3. 所以的注释以“;”开始,单独占据一行
+; 4. 注释不可和配置项同行,例如:主键和子健后面不能添加任何形式的注释
+;
+; gpio的描述形式:Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
+; 例如:port:PA0<0><default><default><default>
+;-------------------------------------------------------------------------------
+
+[product]
+version = "100"
+machine = "evb-v10"
+
+[platform]
+eraseflag = 0
+
+[target]
+boot_clock = 1008
+dcdc2_vol = 1400
+dcdc3_vol = 1300
+ldo2_vol = 3000
+ldo3_vol = 2800
+ldo4_vol = 2800
+storage_type = -1
+
+[clock]
+pll3 = 297
+pll4 = 300
+pll6 = 600
+pll7 = 297
+pll8 = 408
+
+[card_boot]
+logical_start = 40960
+sprite_gpio0 =
+
+[card0_boot_para]
+card_ctrl = 0
+card_high_speed = 1
+card_line = 4
+sdc_d1 = port:PF0<2><1><default><default>
+sdc_d0 = port:PF1<2><1><default><default>
+sdc_clk = port:PF2<2><1><default><default>
+sdc_cmd = port:PF3<2><1><default><default>
+sdc_d3 = port:PF4<2><1><default><default>
+sdc_d2 = port:PF5<2><1><default><default>
+
+[card2_boot_para]
+card_ctrl = 2
+card_high_speed = 1
+card_line = 4
+sdc_cmd = port:PC6<3><1>
+sdc_clk = port:PC7<3><1>
+sdc_d0 = port:PC8<3><1>
+sdc_d1 = port:PC9<3><1>
+sdc_d2 = port:PC10<3><1>
+sdc_d3 = port:PC11<3><1>
+
+[twi_para]
+twi_port = 0
+twi_scl = port:PB0<2><default><default><default>
+twi_sda = port:PB1<2><default><default><default>
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx = port:PB22<2><1><default><default>
+uart_debug_rx = port:PB23<2><1><default><default>
+
+[uart_force_debug]
+uart_debug_port = 0
+uart_debug_tx =port:PF2<4><1><default><default>
+uart_debug_rx =port:PF4<4><1><default><default>
+
+[jtag_para]
+jtag_enable = 1
+jtag_ms = port:PB14<3><default><default><default>
+jtag_ck = port:PB15<3><default><default><default>
+jtag_do = port:PB16<3><default><default><default>
+jtag_di = port:PB17<3><default><default><default>
+
+;---------------------------------------------------------------------------------------------------------
+; if 1 == standby_mode, then support super standby;
+; else, support normal standby.
+;---------------------------------------------------------------------------------------------------------
+[pm_para]
+standby_mode = 1
+
+;-------------------------------------------------------------------------------
+;sdram configuration
+;-------------------------------------------------------------------------------
+[dram_para]
+dram_baseaddr = 0x40000000
+dram_clk = 360
+dram_type = 3
+dram_rank_num =
+dram_chip_density =
+dram_io_width =
+dram_bus_width =
+dram_cas = 6
+dram_zq = 0x7b
+dram_odt_en = 0
+dram_size =0x40000000
+dram_tpr0 = 0x30926692
+dram_tpr1 = 0x1090
+dram_tpr2 = 0x1a0c8
+dram_tpr3 = 0x0
+dram_tpr4 = 0x0
+dram_tpr5 = 0x0
+dram_emr1 = 0x04
+dram_emr2 = 0x0
+dram_emr3 = 0x0
+
+;-------------------------------------------------------------------------------
+;Mali configuration
+;-------------------------------------------------------------------------------
+[mali_para]
+mali_used = 1
+mali_clkdiv = 1
+
+;-------------------------------------------------------------------------------
+;Ethernet MAC configuration
+;-------------------------------------------------------------------------------
+[emac_para]
+emac_used = 1
+emac_rxd3 = port:PA00<2><default><default><default>
+emac_rxd2 = port:PA01<2><default><default><default>
+emac_rxd1 = port:PA02<2><default><default><default>
+emac_rxd0 = port:PA03<2><default><default><default>
+emac_txd3 = port:PA04<2><default><default><default>
+emac_txd2 = port:PA05<2><default><default><default>
+emac_txd1 = port:PA06<2><default><default><default>
+emac_txd0 = port:PA07<2><default><default><default>
+emac_rxclk = port:PA08<2><default><default><default>
+emac_rxerr = port:PA09<2><default><default><default>
+emac_rxdV = port:PA10<2><default><default><default>
+emac_mdc = port:PA11<2><default><default><default>
+emac_mdio = port:PA12<2><default><default><default>
+emac_txen = port:PA13<2><default><default><default>
+emac_txclk = port:PA14<2><default><default><default>
+emac_crs = port:PA15<2><default><default><default>
+emac_col = port:PA16<2><default><default><default>
+emac_reset = port:PA17<1><default><default><default>
+
+;-------------------------------------------------------------------------------
+;i2c configuration
+;-------------------------------------------------------------------------------
+[twi0_para]
+twi0_used = 1
+twi0_scl = port:PB0<2><default><default><default>
+twi0_sda = port:PB1<2><default><default><default>
+
+[twi1_para]
+twi1_used = 1
+twi1_scl = port:PB18<2><default><default><default>
+twi1_sda = port:PB19<2><default><default><default>
+
+[twi2_para]
+twi2_used = 1
+twi2_scl = port:PB20<2><default><default><default>
+twi2_sda = port:PB21<2><default><default><default>
+
+;-------------------------------------------------------------------------------
+;uart configuration
+;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
+;-------------------------------------------------------------------------------
+[uart_para0]
+uart_used = 1
+uart_port = 0
+uart_type = 2
+uart_tx = port:PB22<2><1><default><default>
+uart_rx = port:PB23<2><1><default><default>
+
+[uart_para1]
+uart_used = 0
+uart_port = 1
+uart_type = 8
+uart_tx = port:PA10<4><1><default><default>
+uart_rx = port:PA11<4><1><default><default>
+uart_rts = port:PA12<4><1><default><default>
+uart_cts = port:PA13<4><1><default><default>
+uart_dtr = port:PA14<4><1><default><default>
+uart_dsr = port:PA15<4><1><default><default>
+uart_dcd = port:PA16<4><1><default><default>
+uart_ring = port:PA17<4><1><default><default>
+
+[uart_para2]
+uart_used = 1
+uart_port = 2
+uart_type = 4
+uart_tx = port:PI18<3><default><default><default>
+uart_rx = port:PI19<3><default><default><default>
+uart_rts = port:PI16<3><default><default><default>
+uart_cts = port:PI17<3><default><default><default>
+
+[uart_para3]
+uart_used = 0
+uart_port = 3
+uart_type = 4
+uart_tx = port:PH00<4><1><default><default>
+uart_rx = port:PH01<4><1><default><default>
+uart_rts = port:PH02<4><1><default><default>
+uart_cts = port:PH03<4><1><default><default>
+
+[uart_para4]
+uart_used = 0
+uart_port = 4
+uart_type = 2
+uart_tx = port:PH04<4><1><default><default>
+uart_rx = port:PH05<4><1><default><default>
+
+[uart_para5]
+uart_used = 0
+uart_port = 5
+uart_type = 2
+uart_tx = port:PH06<4><1><default><default>
+uart_rx = port:PH07<4><1><default><default>
+
+[uart_para6]
+uart_used = 0
+uart_port = 6
+uart_type = 2
+uart_tx = port:PA12<4><1><default><default>
+uart_rx = port:PA13<4><1><default><default>
+
+[uart_para7]
+uart_used = 0
+uart_port = 7
+uart_type = 2
+uart_tx = port:PA14<4><1><default><default>
+uart_rx = port:PA15<4><1><default><default>
+
+;-------------------------------------------------------------------------------
+;spi configuration
+;-------------------------------------------------------------------------------
+[spi0_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PI10<2><default><default><default>
+spi_cs1 = port:PI14<2><default><default><default>
+spi_sclk = port:PI11<2><default><default><default>
+spi_mosi = port:PI12<2><default><default><default>
+spi_miso = port:PI13<2><default><default><default>
+
+[spi1_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PA00<3><default><default><default>
+spi_cs1 = port:PA04<3><default><default><default>
+spi_sclk = port:PA01<3><default><default><default>
+spi_mosi = port:PA02<3><default><default><default>
+spi_miso = port:PA03<3><default><default><default>
+
+[spi2_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PC19<3><default><default><default>
+spi_cs1 = port:PB13<2><default><default><default>
+spi_sclk = port:PC20<3><default><default><default>
+spi_mosi = port:PC21<3><default><default><default>
+spi_miso = port:PC22<3><default><default><default>
+
+[spi3_para]
+spi_used = 0
+spi_cs_bitmap = 1
+spi_cs0 = port:PA05<3><default><default><default>
+spi_cs1 = port:PA09<3><default><default><default>
+spi_sclk = port:PA06<3><default><default><default>
+spi_mosi = port:PA07<3><default><default><default>
+spi_miso = port:PA08<3><default><default><default>
+;----------------------------------------------------------------------------------
+;resistance tp configuration
+;----------------------------------------------------------------------------------
+[rtp_para]
+rtp_used = 0
+rtp_screen_size = 5
+rtp_regidity_level = 5
+rtp_press_threshold_enable = 0
+rtp_press_threshold = 0x1f40
+rtp_sensitive_level = 0xf
+rtp_exchange_x_y_flag = 0
+;-------------------------------------------------------------------------------
+;capacitor tp configuration
+;external int function
+;wakeup output function
+;notice:
+; tp_int_port & tp_io_port use the same port
+;-------------------------------------------------------------------------------
+[ctp_para]
+ctp_used = 0
+ctp_twi_id = 2
+ctp_twi_name =
+ctp_screen_max_x = 1280
+ctp_screen_max_y = 720
+ctp_revert_x_flag = 0
+ctp_revert_y_flag = 0
+ctp_exchange_x_y_flag = 0
+
+ctp_int_port = port:PH21<6><default><default><default>
+ctp_wakeup = port:PB13<1><default><default><1>
+
+;-------------------------------------------------------------------------------
+;touch key configuration
+;-------------------------------------------------------------------------------
+[tkey_para]
+tkey_used = 0
+tkey_twi_id = 2
+tkey_twi_addr = 0x62
+tkey_int = port:PI13<6><default><default><default>
+
+;-------------------------------------------------------------------------------
+;motor configuration
+;-------------------------------------------------------------------------------
+[motor_para]
+motor_used = 0
+motor_shake = port:PB03<1><default><default><1>
+
+;-------------------------------------------------------------------------------
+;nand flash configuration
+;-------------------------------------------------------------------------------
+[nand_para]
+nand_used = 1
+nand_we = port:PC00<2><default><default><default>
+nand_ale = port:PC01<2><default><default><default>
+nand_cle = port:PC02<2><default><default><default>
+nand_ce1 = port:PC03<2><default><default><default>
+nand_ce0 = port:PC04<2><default><default><default>
+nand_nre = port:PC05<2><default><default><default>
+nand_rb0 = port:PC06<2><default><default><default>
+nand_rb1 = port:PC07<2><default><default><default>
+nand_d0 = port:PC08<2><default><default><default>
+nand_d1 = port:PC09<2><default><default><default>
+nand_d2 = port:PC10<2><default><default><default>
+nand_d3 = port:PC11<2><default><default><default>
+nand_d4 = port:PC12<2><default><default><default>
+nand_d5 = port:PC13<2><default><default><default>
+nand_d6 = port:PC14<2><default><default><default>
+nand_d7 = port:PC15<2><default><default><default>
+nand_wp = port:PC16<2><default><default><default>
+nand_ce2 = port:PC17<2><default><default><default>
+nand_ce3 = port:PC18<2><default><default><default>
+nand_ce4 =
+nand_ce5 =
+nand_ce6 =
+nand_ce7 =
+nand_spi = port:PC23<3><default><default><default>
+nand_ndqs = port:PC24<2><default><default><default>
+good_block_ratio = 0
+
+;-------------------------------------------------------------------------------
+;disp init configuration
+;
+;disp_mode (0:screen0<screen0,fb0> 1:screen1<screen1,fb0> 2:two_diff_screen_diff_contents<screen0,screen1,fb0,fb1>
+; 3:two_same_screen_diff_contets<screen0,screen1,fb0> 4:two_diff_screen_same_contents<screen0,screen1,fb0>)
+;screenx_output_type (0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga)
+;screenx_output_mode (used for tv/hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50 5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60 11:pal 14:ntsc)
+;screenx_output_mode (used for vga output, 0:1680*1050 1:1440*900 2:1360*768 3:1280*1024 4:1024*768 5:800*600 6:640*480 10:1920*1080 11:1280*720)
+;fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
+;fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA) --- 0 for linux, 2 for android
+;lcd0_bright (lcd0 init bright,the range:[0,256],default:197
+;lcd1_bright (lcd1 init bright,the range:[0,256],default:197
+;-------------------------------------------------------------------------------
+[disp_init]
+disp_init_enable = 1
+disp_mode = 0
+
+screen0_output_type = 3
+screen0_output_mode = 5
+
+screen1_output_type = 3
+screen1_output_mode = 5
+
+fb0_framebuffer_num = 2
+fb0_format = 10
+fb0_pixel_sequence = 0
+fb0_scaler_mode_enable = 1
+
+fb1_framebuffer_num = 2
+fb1_format = 10
+fb1_pixel_sequence = 0
+fb1_scaler_mode_enable = 1
+
+lcd0_backlight = 197
+lcd1_backlight = 197
+
+lcd0_bright = 50
+lcd0_contrast = 50
+lcd0_saturation = 57
+lcd0_hue = 50
+
+lcd1_bright = 50
+lcd1_contrast = 50
+lcd1_saturation = 57
+lcd1_hue = 50
+
+;-------------------------------------------------------------------------------
+;lcd0 configuration
+
+;lcd_dclk_freq: in MHZ unit
+;lcd_pwm_freq: in HZ unit
+;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds
+;lcd_hbp: hsync back porch
+;lcd_ht: hsync total cycle
+;lcd_vbp: vsync back porch
+;lcd_vt: vysnc total cycle *2
+;lcd_hv_if: 0:hv parallel 1:hv serial
+;lcd_hv_smode: 0:RGB888 1:CCIR656
+;lcd_hv_s888_if serial RGB format
+;lcd_hv_syuv_if: serial YUV format
+;lcd_hspw: hsync plus width
+;lcd_vspw: vysnc plus width
+;lcd_lvds_ch: 0:single channel; 1:dual channel
+;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
+;lcd_lvds_bitwidth: 0:24bit; 1:18bit
+;lcd_lvds_io_cross: 0:normal; 1:pn cross
+;lcd_cpu_if: 0:18bit; 1:16bit mode0; 2:16bit mode1; 3:16bit mode2; 4:16bit mode3; 5:9bit; 6:8bit 256K; 7:8bit 65K
+;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
+
+;lcd_gpio_0: SCL
+;lcd_gpio_1 SDA
+;-------------------------------------------------------------------------------
+[lcd0_para]
+lcd_used = 0
+
+lcd_x = 1280
+lcd_y = 720
+lcd_dclk_freq = 33
+lcd_pwm_not_used = 0
+lcd_pwm_ch = 0
+lcd_pwm_freq = 10000
+lcd_pwm_pol = 0
+lcd_if = 0
+lcd_hbp = 46
+lcd_ht = 1055
+lcd_vbp = 23
+lcd_vt = 1050
+lcd_vspw = 0
+lcd_hspw = 0
+lcd_hv_if = 0
+lcd_hv_smode = 0
+lcd_hv_s888_if = 0
+lcd_hv_syuv_if = 0
+lcd_lvds_ch = 0
+lcd_lvds_mode = 0
+lcd_lvds_bitwidth = 0
+lcd_lvds_io_cross = 0
+lcd_cpu_if = 0
+lcd_frm = 0
+lcd_io_cfg0 = 0x10000000
+lcd_gamma_correction_en = 0
+lcd_gamma_tbl_0 = 0x00000000
+lcd_gamma_tbl_1 = 0x00010101
+lcd_gamma_tbl_255 = 0x00ffffff
+
+lcd_bl_en_used = 1
+lcd_bl_en = port:PH07<1><0><default><1>
+
+lcd_power_used = 1
+lcd_power = port:PH08<1><0><default><1>
+
+lcd_pwm_used = 1
+lcd_pwm = port:PB02<2><0><default><default>
+
+lcdd0 = port:PD00<2><0><default><default>
+lcdd1 = port:PD01<2><0><default><default>
+lcdd2 = port:PD02<2><0><default><default>
+lcdd3 = port:PD03<2><0><default><default>
+lcdd4 = port:PD04<2><0><default><default>
+lcdd5 = port:PD05<2><0><default><default>
+lcdd6 = port:PD06<2><0><default><default>
+lcdd7 = port:PD07<2><0><default><default>
+lcdd8 = port:PD08<2><0><default><default>
+lcdd9 = port:PD09<2><0><default><default>
+lcdd10 = port:PD10<2><0><default><default>
+lcdd11 = port:PD11<2><0><default><default>
+lcdd12 = port:PD12<2><0><default><default>
+lcdd13 = port:PD13<2><0><default><default>
+lcdd14 = port:PD14<2><0><default><default>
+lcdd15 = port:PD15<2><0><default><default>
+lcdd16 = port:PD16<2><0><default><default>
+lcdd17 = port:PD17<2><0><default><default>
+lcdd18 = port:PD18<2><0><default><default>
+lcdd19 = port:PD19<2><0><default><default>
+lcdd20 = port:PD20<2><0><default><default>
+lcdd21 = port:PD21<2><0><default><default>
+lcdd22 = port:PD22<2><0><default><default>
+lcdd23 = port:PD23<2><0><default><default>
+lcdclk = port:PD24<2><0><default><default>
+lcdde = port:PD25<2><0><default><default>
+lcdhsync = port:PD26<2><0><default><default>
+lcdvsync = port:PD27<2><0><default><default>
+
+;----------------------------------------------------------------------------------
+;lcd1 configuration
+
+;lcd_dclk_freq: in MHZ unit
+;lcd_pwm_freq: in HZ unit
+;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds
+;lcd_hbp: hsync back porch
+;lcd_ht: hsync total cycle
+;lcd_vbp: vsync back porch
+;lcd_vt: vysnc total cycle *2
+;lcd_hv_if: 0:hv parallel 1:hv serial
+;lcd_hv_smode: 0:RGB888 1:CCIR656
+;lcd_hv_s888_if serial RGB format
+;lcd_hv_syuv_if: serial YUV format
+;lcd_hspw: hsync plus width
+;lcd_vspw: vysnc plus width
+;lcd_lvds_ch: 0:single channel; 1:dual channel
+;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
+;lcd_lvds_bitwidth: 0:24bit; 1:18bit
+;lcd_lvds_io_cross: 0:normal; 1:pn cross
+;lcd_cpu_if: 0:18bit; 1:16bit mode0; 2:16bit mode1; 3:16bit mode2; 4:16bit mode3; 5:9bit; 6:8bit 256K; 7:8bit 65K
+;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
+
+;lcd_gpio_0: SCL
+;lcd_gpio_1 SDA
+;----------------------------------------------------------------------------------
+[lcd1_para]
+lcd_used = 0
+
+lcd_x = 0
+lcd_y = 0
+lcd_dclk_freq = 0
+lcd_pwm_not_used = 0
+lcd_pwm_ch = 1
+lcd_pwm_freq = 0
+lcd_pwm_pol = 0
+lcd_if = 0
+lcd_hbp = 0
+lcd_ht = 0
+lcd_vbp = 0
+lcd_vt = 0
+lcd_vspw = 0
+lcd_hspw = 0
+lcd_hv_if = 0
+lcd_hv_smode = 0
+lcd_hv_s888_if = 0
+lcd_hv_syuv_if = 0
+lcd_lvds_ch = 0
+lcd_lvds_mode = 0
+lcd_lvds_bitwidth = 0
+lcd_lvds_io_cross = 0
+lcd_cpu_if = 0
+lcd_frm = 0
+lcd_io_cfg0 = 0
+lcd_gamma_correction_en = 0
+lcd_gamma_tbl_0 = 0x00000000
+lcd_gamma_tbl_1 = 0x00010101
+lcd_gamma_tbl_255 = 0x00ffffff
+
+lcd_bl_en_used = 0
+lcd_bl_en =
+
+lcd_power_used = 0
+lcd_power =
+
+lcd_pwm_used = 1
+lcd_pwm = port:PI03<2><0><default><default>
+
+lcd_gpio_0 =
+lcd_gpio_1 =
+lcd_gpio_2 =
+lcd_gpio_3 =
+
+lcdd0 = port:PH00<2><0><default><default>
+lcdd1 = port:PH01<2><0><default><default>
+lcdd2 = port:PH02<2><0><default><default>
+lcdd3 = port:PH03<2><0><default><default>
+lcdd4 = port:PH04<2><0><default><default>
+lcdd5 = port:PH05<2><0><default><default>
+lcdd6 = port:PH06<2><0><default><default>
+lcdd7 = port:PH07<2><0><default><default>
+lcdd8 = port:PH08<2><0><default><default>
+lcdd9 = port:PH09<2><0><default><default>
+lcdd10 = port:PH10<2><0><default><default>
+lcdd11 = port:PH11<2><0><default><default>
+lcdd12 = port:PH12<2><0><default><default>
+lcdd13 = port:PH13<2><0><default><default>
+lcdd14 = port:PH14<2><0><default><default>
+lcdd15 = port:PH15<2><0><default><default>
+lcdd16 = port:PH16<2><0><default><default>
+lcdd17 = port:PH17<2><0><default><default>
+lcdd18 = port:PH18<2><0><default><default>
+lcdd19 = port:PH19<2><0><default><default>
+lcdd20 = port:PH20<2><0><default><default>
+lcdd21 = port:PH21<2><0><default><default>
+lcdd22 = port:PH22<2><0><default><default>
+lcdd23 = port:PH23<2><0><default><default>
+lcdclk = port:PH24<2><0><default><default>
+lcdde = port:PH25<2><0><default><default>
+lcdhsync = port:PH26<2><0><default><default>
+lcdvsync = port:PH27<2><0><default><default>
+
+;-------------------------------------------------------------------------------
+;tv out dac configuration
+;dacx_src: 0:composite; 1:luma; 2:chroma; 4:Y; 5:Pb; 6: Pr; 7:none
+;-------------------------------------------------------------------------------
+[tv_out_dac_para]
+dac_used = 1
+dac0_src = 4
+dac1_src = 5
+dac2_src = 6
+dac3_src = 0
+
+;----------------------------------------------------------------------------------
+;hdmi configuration
+;----------------------------------------------------------------------------------
+[hdmi_para]
+hdmi_used = 1
+
+
+[camera_list_para]
+camera_list_para_used = 0
+ov7670 = 0
+gc0308 = 1
+gt2005 = 0
+hi704 = 0
+sp0838 = 0
+mt9m112 = 0
+mt9m113 = 0
+ov2655 = 0
+hi253 = 0
+gc0307 = 0
+mt9d112 = 0
+ov5640 = 1
+gc2015 = 0
+ov2643 = 0
+gc0329 = 0
+gc0309 = 0
+tvp5150 = 0
+s5k4ec = 0
+ov5650_mv9335 = 0
+siv121d = 0
+
+;--------------------------------------------------------------------------------
+;csi gpio configuration
+;csi_if: 0:hv_8bit 1:hv_16bit 2:hv_24bit 3:bt656 1ch 4:bt656 2ch 5:bt656 4ch
+;csi_mode: 0:sample one csi to one buffer 1:sample two csi to one buffer
+;csi_dev_qty: The quantity of devices linked to csi interface
+;csi_vflip: flip in vertical direction 0:disable 1:enable
+;csi_hflip: flip in horizontal direction 0:disable 1:enable
+;csi_stby_mode: 0:not shut down power at standby 1:shut down power at standby
+;csi_iovdd: camera module io power , pmu power supply
+;csi_avdd: camera module analog power , pmu power supply
+;csi_dvdd: camera module core power , pmu power supply
+;pmu_ldo3: fill "axp20_pll"
+;pmu_ldo4: fill "axp20_hdmi"
+;fill "" when not using any pmu power supply
+;csi_flash_pol: the active polority of the flash light IO 0:low active 1:high active
+;--------------------------------------------------------------------------------
+
+[csi0_para]
+csi_used = 0
+
+csi_dev_qty = 1
+csi_stby_mode = 0
+csi_mname = "gc0308"
+csi_if = 0
+csi_iovdd = ""
+csi_avdd = ""
+csi_dvdd = ""
+csi_vol_iovdd =
+csi_vol_dvdd =
+csi_vol_avdd =
+csi_vflip = 0
+csi_hflip = 0
+csi_flash_pol = 0
+csi_facing = 0
+
+csi_twi_id = 1
+csi_twi_addr = 0x42
+csi_pck = port:PE00<3><default><default><default>
+csi_ck = port:PE01<3><default><default><default>
+csi_hsync = port:PE02<3><default><default><default>
+csi_vsync = port:PE03<3><default><default><default>
+csi_d0 = port:PE04<3><default><default><default>
+csi_d1 = port:PE05<3><default><default><default>
+csi_d2 = port:PE06<3><default><default><default>
+csi_d3 = port:PE07<3><default><default><default>
+csi_d4 = port:PE08<3><default><default><default>
+csi_d5 = port:PE09<3><default><default><default>
+csi_d6 = port:PE10<3><default><default><default>
+csi_d7 = port:PE11<3><default><default><default>
+csi_reset = port:PH13<1><default><default><0>
+csi_power_en =
+csi_stby = port:PH16<1><default><default><0>
+
+[csi1_para]
+csi_used = 0
+
+csi_dev_qty = 1
+csi_stby_mode = 0
+csi_mname = "gc0308"
+csi_if = 0
+csi_iovdd = ""
+csi_avdd = ""
+csi_dvdd = ""
+csi_vol_iovdd =
+csi_vol_dvdd =
+csi_vol_avdd =
+csi_vflip = 0
+csi_hflip = 0
+csi_flash_pol = 0
+csi_facing = 1
+
+csi_twi_id = 1
+csi_twi_addr = 0x42
+csi_pck = port:PG00<3><default><default><default>
+csi_ck = port:PG01<3><default><default><default>
+csi_hsync = port:PG02<3><default><default><default>
+csi_vsync = port:PG03<3><default><default><default>
+csi_d0 = port:PG04<3><default><default><default>
+csi_d1 = port:PG05<3><default><default><default>
+csi_d2 = port:PG06<3><default><default><default>
+csi_d3 = port:PG07<3><default><default><default>
+csi_d4 = port:PG08<3><default><default><default>
+csi_d5 = port:PG09<3><default><default><default>
+csi_d6 = port:PG10<3><default><default><default>
+csi_d7 = port:PG11<3><default><default><default>
+csi_reset = port:PH14<1><default><default><0>
+csi_power_en =
+csi_stby = port:PH17<1><default><default><0>
+
+;-------------------------------------------------------------------------------
+;tv configuration
+;
+;-------------------------------------------------------------------------------
+[tvout_para]
+tvout_used = 0
+tvout_channel_num = 1
+
+[tvin_para]
+tvin_used = 0
+tvin_channel_num = 4
+
+
+;-------------------------------------------------------------------------------
+;sata configuration
+;
+;-------------------------------------------------------------------------------
+[sata_para]
+sata_used = 1
+sata_power_en =
+
+
+;-------------------------------------------------------------------------------
+; SDMMC PINS MAPPING
+; ------------------------------------------------------------------------------
+; Config Guide
+; sdc_used: 1-enable card, 0-disable card
+; sdc_detmode: card detect mode
+; 1-detect card by gpio polling
+; 2-detect card by gpio irq(must use IO with irq function)
+; 3-no detect, always in for boot card
+; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert
+; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit
+; sdc_use_wp: 1-with write protect IO, 0-no write protect IO
+; sdc_isio: for sdio card
+; sdc_regulator: power control.
+; other: GPIO Mapping configuration
+; ------------------------------------------------------------------------------
+; Note:
+; 1 if detmode=2, sdc_det's config=6
+; else if detmode=1, sdc_det's config=0
+; else sdc_det IO is not necessary
+; 2 if the customer wants to support UHS-I and HS200 features, he must provide
+; an independent power supply for the card. This is only used in platforms
+; that supports SD3.0 cards and eMMC4.4+ flashes
+;-------------------------------------------------------------------------------
+[mmc0_para]
+sdc_used = 1
+sdc_detmode = 1
+sdc_buswidth = 4
+sdc_clk = port:PF02<2><1><2><default>
+sdc_cmd = port:PF03<2><1><2><default>
+sdc_d0 = port:PF01<2><1><2><default>
+sdc_d1 = port:PF00<2><1><2><default>
+sdc_d2 = port:PF05<2><1><2><default>
+sdc_d3 = port:PF04<2><1><2><default>
+sdc_det = port:PH1<0><1><default><default>
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 0
+sdc_regulator = "none"
+
+[mmc1_para]
+sdc_used = 0
+sdc_detmode = 4
+sdc_buswidth = 4
+sdc_clk = port:PG00<2><1><2><default>
+sdc_cmd = port:PG01<2><1><2><default>
+sdc_d0 = port:PG02<2><1><2><default>
+sdc_d1 = port:PG03<2><1><2><default>
+sdc_d2 = port:PG04<2><1><2><default>
+sdc_d3 = port:PG05<2><1><2><default>
+sdc_det =
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 0
+sdc_regulator = "none"
+
+[mmc2_para]
+sdc_used = 0
+sdc_detmode = 3
+sdc_buswidth = 4
+sdc_cmd = port:PC06<3><1><2><default>
+sdc_clk = port:PC07<3><1><2><default>
+sdc_d0 = port:PC08<3><1><2><default>
+sdc_d1 = port:PC09<3><1><2><default>
+sdc_d2 = port:PC10<3><1><2><default>
+sdc_d3 = port:PC11<3><1><2><default>
+sdc_det =
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 0
+sdc_regulator = "none"
+
+[mmc3_para]
+sdc_used = 1
+sdc_detmode = 4
+sdc_buswidth = 4
+sdc_cmd = port:PI04<2><1><2><default>
+sdc_clk = port:PI05<2><1><2><default>
+sdc_d0 = port:PI06<2><1><2><default>
+sdc_d1 = port:PI07<2><1><2><default>
+sdc_d2 = port:PI08<2><1><2><default>
+sdc_d3 = port:PI09<2><1><2><default>
+sdc_det =
+sdc_use_wp = 0
+sdc_wp =
+sdc_isio = 1
+sdc_regulator = "none"
+
+; ------------------------------------------------------------------------------
+; memory stick configuration
+;-------------------------------------------------------------------------------
+[ms_para]
+ms_used = 0
+ms_bs = port:PH06<5><default><default><default>
+ms_clk = port:PH07<5><default><default><default>
+ms_d0 = port:PH08<5><default><default><default>
+ms_d1 = port:PH09<5><default><default><default>
+ms_d2 = port:PH10<5><default><default><default>
+ms_d3 = port:PH11<5><default><default><default>
+ms_det =
+
+; ------------------------------------------------------------------------------
+; sim card configuration
+;-------------------------------------------------------------------------------
+[smc_para]
+smc_used = 0
+smc_rst = port:PH13<5><default><default><default>
+smc_vppen = port:PH14<5><default><default><default>
+smc_vppp = port:PH15<5><default><default><default>
+smc_det = port:PH16<5><default><default><default>
+smc_vccen = port:PH17<5><default><default><default>
+smc_sck = port:PH18<5><default><default><default>
+smc_sda = port:PH19<5><default><default><default>
+
+;-------------------------------------------------------------------------------
+;ps2 configuration
+;-------------------------------------------------------------------------------
+[ps2_0_para]
+ps2_used = 0
+ps2_scl = port:PI20<2><1><default><default>
+ps2_sda = port:PI21<2><1><default><default>
+
+[ps2_1_para]
+ps2_used = 0
+ps2_scl = port:PI14<3><1><default><default>
+ps2_sda = port:PI15<3><1><default><default>
+
+;-------------------------------------------------------------------------------
+;can bus configuration
+;-------------------------------------------------------------------------------
+[can_para]
+can_used = 0
+can_tx = port:PA16<3><default><default><default>
+can_rx = port:PA17<3><default><default><default>
+
+;-------------------------------------------------------------------------------
+;key matrix
+;-------------------------------------------------------------------------------
+[keypad_para]
+kp_used = 0
+kp_in_size = 8
+kp_out_size = 8
+kp_in0 = port:PH08<4><1><default><default>
+kp_in1 = port:PH09<4><1><default><default>
+kp_in2 = port:PH10<4><1><default><default>
+kp_in3 = port:PH11<4><1><default><default>
+kp_in4 = port:PH14<4><1><default><default>
+kp_in5 = port:PH15<4><1><default><default>
+kp_in6 = port:PH16<4><1><default><default>
+kp_in7 = port:PH17<4><1><default><default>
+kp_out0 = port:PH18<4><1><default><default>
+kp_out1 = port:PH19<4><1><default><default>
+kp_out2 = port:PH22<4><1><default><default>
+kp_out3 = port:PH23<4><1><default><default>
+kp_out4 = port:PH24<4><1><default><default>
+kp_out5 = port:PH25<4><1><default><default>
+kp_out6 = port:PH26<4><1><default><default>
+kp_out7 = port:PH27<4><1><default><default>
+
+
+;-------------------------------------------------------------------------------
+;[usbc0]:控制器0的配置。
+;usb_used:USB使能标志。置1,表示系统中USB模块可用,置0,则表示系统USB禁用。
+;usb_port_type:USB端口的使用情况。 0:device only;1:host only;2:OTG
+;usb_detect_type:USB端口的检查方式。0:不做检测;1:vbus/id检查;2:id/dpdm检查
+;usb_id_gpio:USB ID pin脚配置。具体请参考gpio配置说明。
+;usb_det_vbus_gpio:USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
+;usb_drv_vbus_gpio:USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
+;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
+;usb_restrict_gpio usb限流控制pin
+;usb_restric_flag: usb限流标置
+;-------------------------------------------------------------------------------
+;-------------------------------------------------------------------------------
+;--- USB0控制标志
+;-------------------------------------------------------------------------------
+[usbc0]
+usb_used = 1
+usb_port_type = 2
+usb_detect_type = 1
+usb_id_gpio = port:PH04<0><1><default><default>
+usb_det_vbus_gpio = port:PH05<0><0><default><default>
+usb_drv_vbus_gpio = port:PB09<1><0><default><0>
+usb_host_init_state = 0
+
+
+;-------------------------------------------------------------------------------
+;--- USB1控制标志
+;------------------------------------------------------------------------------
+[usbc1]
+usb_used = 1
+usb_port_type = 1
+usb_detect_type = 0
+usb_drv_vbus_gpio = port:PH06<1><0><default><0>
+usb_restrict_gpio =
+usb_host_init_state = 1
+usb_restric_flag = 0
+
+;------------------------------------------------------------------------------
+;--- USB2控制标志
+;------------------------------------------------------------------------------
+[usbc2]
+usb_used = 1
+usb_port_type = 1
+usb_detect_type = 0
+usb_drv_vbus_gpio = port:PH03<1><0><default><0>
+usb_restrict_gpio =
+
+usb_host_init_state = 0
+usb_restric_flag = 0
+
+;--------------------------------
+;--- USB Device
+;--------------------------------
+[usb_feature]
+vendor_id = 0x18D1
+mass_storage_id = 0x0001
+adb_id = 0x0002
+
+manufacturer_name = "USB Developer"
+product_name = "Android"
+serial_number = "20080411"
+
+[msc_feature]
+vendor_name = "USB 2.0"
+product_name = "USB Flash Driver"
+release = 100
+luns = 2
+
+;-------------------------------------------------------------------------------
+; G sensor configuration
+; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
+;-------------------------------------------------------------------------------
+[gsensor_para]
+gsensor_used = 1
+gsensor_twi_id = 1
+gsensor_int1 =
+gsensor_int2 =
+
+;-------------------------------------------------------------------------------
+; gps gpio configuration
+; gps_spi_id --- the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used
+; gps_spi_cs_num --- the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1
+; gps_lradc --- the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc
+;-------------------------------------------------------------------------------
+[gps_para]
+gps_used = 0
+gps_spi_id = 2
+gps_spi_cs_num = 0
+gps_lradc = 1
+gps_clk = port:PI00<2><default><default><default>
+gps_sign = port:PI01<2><default><default><default>
+gps_mag = port:PI02<2><default><default><default>
+gps_vcc_en = port:PC22<1><default><default><0>
+gps_osc_en = port:PI14<1><default><default><0>
+gps_rx_en = port:PI15<1><default><default><0>
+
+;--------------------------------------------------------------------------------
+;wifi configuration
+;wifi_sdc_id --- 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
+;wifi_usbc_id --- 0- USB0, 1- USB1, 2- USB2
+;wifi_usbc_type -- 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
+;wifi_mod_sel --- 0- none, 1- bcm40181, 2- bcm40183(wifi+bt),
+; 3 - rtl8723as(wifi+bt), 4- rtl8189es(SM89E00),
+; 5 - rtl8192cu, 6 - rtl8188eu, 7 - ap6210
+;--------------------------------------------------------------------------------
+[wifi_para]
+wifi_used = 1
+wifi_sdc_id = 3
+wifi_usbc_id = 2
+wifi_usbc_type = 1
+wifi_mod_sel = 5
+wifi_power = ""
+
+; 1 - bcm40181 sdio wifi gpio config
+;bcm40181_shdn = port:PH09<1><default><default><0>
+;bcm40181_host_wake = port:PH10<0><default><default><0>
+
+; 2 - bcm40183 sdio wifi gpio config
+;bcm40183_wl_regon = port:PH09<1><default><default><0>
+;bcm40183_wl_host_wake = port:PH10<0><default><default><0>
+;bcm40183_bt_rst = port:PB05<1><default><default><0>
+;bcm40183_bt_regon = port:PB05<1><default><default><0>
+;bcm40183_bt_wake = port:PI20<1><default><default><0>
+;bcm40183_bt_host_wake = port:PI21<0><default><default><0>
+
+; 3 - rtl8723as sdio wifi + bt gpio config
+rtk_rtl8723as_wl_dis = port:PH09<1><default><default><0>
+rtk_rtl8723as_bt_dis = port:PB05<1><default><default><0>
+rtk_rtl8723as_wl_host_wake = port:PH10<0><default><default><0>
+rtk_rtl8723as_bt_host_wake = port:PI21<0><default><default><0>
+
+; 4 - rtl8189es sdio wifi gpio config
+;rtl8189es_shdn = port:PH09<1><default><default><0>
+;rtl8189es_wakeup = port:PH10<1><default><default><1>
+
+; 5 - rtl8192cu usb wifi
+
+; 6 - rtl8188eu usb wifi
+
+; 7 - ap6210 sdio wifi + bt gpio config
+ap6xxx_wl_regon = port:PH09<1><default><default><0>
+ap6xxx_wl_host_wake = port:PH10<0><default><default><0>
+ap6xxx_bt_regon = port:PB05<1><default><default><0>
+ap6xxx_bt_wake = port:PI20<1><default><default><0>
+ap6xxx_bt_host_wake = port:PI21<0><default><default><0>
+
+;-------------------------------------------------------------------------------
+;3G configuration
+;-------------------------------------------------------------------------------
+[3g_para]
+3g_used = 0
+3g_usbc_num = 2
+3g_uart_num = 0
+3g_pwr =
+3g_wakeup =
+3g_int =
+
+;-------------------------------------------------------------------------------
+;gyroscope
+;-------------------------------------------------------------------------------
+[gy_para]
+gy_used = 0
+gy_twi_id = 1
+gy_twi_addr = 0x00
+gy_int1 = port:PH18<6><1><default><default>
+gy_int2 = port:PH19<6><1><default><default>
+
+;-------------------------------------------------------------------------------
+;light sensor
+;-------------------------------------------------------------------------------
+[ls_para]
+ls_used = 0
+ls_twi_id = 1
+ls_twi_addr = 0x00
+ls_int = port:PH20<6><1><default><default>
+
+;-------------------------------------------------------------------------------
+;compass
+;-------------------------------------------------------------------------------
+[compass_para]
+compass_used = 0
+compass_twi_id = 1
+compass_twi_addr = 0x00
+compass_int = port:PI13<6><1><default><default>
+
+;-------------------------------------------------------------------------------
+;blue tooth
+;bt_used ---- blue tooth used (0- no used, 1- used)
+;bt_uard_id ---- uart index
+;-------------------------------------------------------------------------------
+[bt_para]
+bt_used = 1
+bt_uart_id = 2
+bt_wakeup = port:PI20<1><default><default><1>
+bt_gpio = port:PI21<1><default><default><1>
+bt_rst = port:PB05<1><default><default><0>
+
+[i2s_para]
+i2s_used = 0
+i2s_channel = 2
+i2s_mclk = port:PB5<2><1><default><default>
+i2s_bclk = port:PB6<2><1><default><default>
+i2s_lrclk = port:PB7<2><1><default><default>
+i2s_dout0 = port:PB8<2><1><default><default>
+i2s_dout1 =
+i2s_dout2 =
+i2s_dout3 =
+i2s_din = port:PB12<2><1><default><default>
+
+[spdif_para]
+spdif_used = 0
+spdif_mclk =
+spdif_dout = port:PB13<4><1><default><default>
+spdif_din =
+
+[audio_para]
+audio_used = 1
+audio_pa_ctrl = port:PH15<1><default><default><0>
+
+[switch_para]
+switch_used=1
+
+;-------------------------------------------------------------------------------
+;ir --- infra remote configuration
+;-------------------------------------------------------------------------------
+[ir_para]
+ir_used = 0
+ir_rx = port:PB04<2><default><default><default>
+
+
+;-------------------------------------------------------------------------------
+;pmu_twi_addr ---slave address
+;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
+;pmu_irq_id ---irq number (0 irq0,1 irq1,……)
+;pmu_battery_rdc ---battery initial resistance,mΩ,根据实际电池内阻填写
+;pmu_battery_cap ---battery capability,mAh,根据实际电池容量填写
+;pmu_init_chgcur ---set initial charging current limite,mA,300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
+;pmu_suspend_chgcur ---set suspend charging current limite,mA,300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
+;pmu_resume_chgcur ---set resume charging current limite,mA,300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
+;pmu_shutdown_chgcur ---set shutdown charging current limite,mA,300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
+;pmu_init_chgvol ---set initial charing target voltage,mV,4100/4150/4200/4360
+;pmu_init_chgend_rate ---set initial charing end current rate,10/15
+;pmu_init_chg_enabled ---set initial charing enabled,0:关闭,1:打开
+;pmu_init_adc_freq ---set initial adc frequency,Hz,25/50/100/200
+;pmu_init_adc_freqc ---set initial coulomb adc coufrequency,Hz,25/50/100/200
+;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70
+;pmu_init_chg_csttime ---set initial constance-charging time,min,360/480/600/720
+;pmu_usbvol ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
+;pmu_usbcur ---set usb-ac limited voltage level,mA,100/500/900, 0 - not limite
+;pmu_usbvol_pc ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
+;pmu_usbcur_pc ---set usb-pc limited voltage level,mA,100/500/900, 0 - not limite
+;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
+;pmu_pwron_vol ---set protect voltage after system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
+;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000
+;pmu_pekoff_en ---set pek off enable, 0:关闭,1:打开
+;pmu_peklong_time ---set pek pek long irq time,ms,1000/1500/2000/2500
+;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000
+;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/64
+;pmu_pwrnoe_time ---set pmu n_oe power down delay time,ms,128/1000/2000/3000
+;pmu_intotp_en ---set pmu power down when overtempertur enable,0:关闭,1:打开
+;pmu_suspendpwroff_vol ---set pmu shutdown voltage when cpu is suspend and battery voltage is low
+;pmu_batdeten ---set pmu battery detect enabled,0:关闭,1:打开
+;-------------------------------------------------------------------------------
+[pmu_para]
+pmu_used = 1
+pmu_twi_addr = 0x34
+pmu_twi_id = 0
+pmu_irq_id = 32
+pmu_battery_rdc = 100
+pmu_battery_cap = 3200
+pmu_init_chgcur = 300
+pmu_earlysuspend_chgcur = 600
+pmu_suspend_chgcur = 1000
+pmu_resume_chgcur = 300
+pmu_shutdown_chgcur = 1000
+pmu_init_chgvol = 4200
+pmu_init_chgend_rate = 15
+pmu_init_chg_enabled = 1
+pmu_init_adc_freq = 100
+pmu_init_adc_freqc = 100
+pmu_init_chg_pretime = 50
+pmu_init_chg_csttime = 720
+
+pmu_bat_para1 = 0
+pmu_bat_para2 = 0
+pmu_bat_para3 = 0
+pmu_bat_para4 = 0
+pmu_bat_para5 = 5
+pmu_bat_para6 = 8
+pmu_bat_para7 = 11
+pmu_bat_para8 = 22
+pmu_bat_para9 = 33
+pmu_bat_para10 = 43
+pmu_bat_para11 = 50
+pmu_bat_para12 = 59
+pmu_bat_para13 = 71
+pmu_bat_para14 = 83
+pmu_bat_para15 = 92
+pmu_bat_para16 = 100
+
+pmu_usbvol_limit = 1
+pmu_usbcur_limit = 0
+pmu_usbvol = 4000
+pmu_usbcur = 0
+
+pmu_usbvol_pc = 4000
+pmu_usbcur_pc = 0
+
+pmu_pwroff_vol = 3300
+pmu_pwron_vol = 2900
+
+pmu_pekoff_time = 6000
+pmu_pekoff_en = 1
+pmu_peklong_time = 1500
+pmu_pekon_time = 1000
+pmu_pwrok_time = 64
+pmu_pwrnoe_time = 2000
+pmu_intotp_en = 1
+
+pmu_used2 = 0
+pmu_adpdet = port:PH02<0><default><default><default>
+pmu_init_chgcur2 = 400
+pmu_earlysuspend_chgcur2 = 600
+pmu_suspend_chgcur2 = 1200
+pmu_resume_chgcur2 = 400
+pmu_shutdown_chgcur2 = 1200
+
+pmu_suspendpwroff_vol = 3500
+
+pmu_batdeten = 1
+
+[recovery_key]
+;key_min =4
+;key_max =6
+[system]
+;recovery_key = port:PH16<0><1>
+
+;----------------------------------------------------------------------------------
+; dvfs voltage-frequency table configuration
+;
+; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz
+; min_freq: cpu minimum frequency, based on Hz, can not be less than 60MHz
+;
+; LV_count: count of LV_freq/LV_volt, must be < 16
+;
+; LV1: core vdd is 1.50v if cpu frequency is (1008Mhz, 1056Mhz]
+; LV2: core vdd is 1.40v if cpu frequency is (912Mhz, 1008Mhz]
+; LV3: core vdd is 1.35v if cpu frequency is (864Mhz, 912Mhz]
+; LV4: core vdd is 1.30v if cpu frequency is (624Mhz, 864Mhz]
+; LV5: core vdd is 1.25v if cpu frequency is (60Mhz, 624Mhz]
+;
+;----------------------------------------------------------------------------------
+[dvfs_table]
+max_freq = 1008000000
+min_freq = 60000000
+
+LV_count = 6
+
+LV1_freq = 1008000000
+LV1_volt = 1400
+
+LV2_freq = 864000000
+LV2_volt = 1300
+
+LV3_freq = 72000000
+LV3_volt = 1200
+
+LV4_freq = 528000000
+LV4_volt = 1100
+
+LV5_freq = 336000000
+LV5_volt = 1000
+
+LV6_freq = 192000000
+LV6_volt = 900