diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b5f4e584f3c9..28a728f883bc 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -533,6 +533,12 @@ struct cp210x_single_port_config { #define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587 #define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600 +/* CP2102N QFN20 port configuration values */ +#define CP2102N_QFN20_GPIO2_TXLED_MODE BIT(2) +#define CP2102N_QFN20_GPIO3_RXLED_MODE BIT(3) +#define CP2102N_QFN20_GPIO1_RS485_MODE BIT(4) +#define CP2102N_QFN20_GPIO0_CLK_MODE BIT(6) + /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */ struct cp210x_gpio_write { u8 mask; @@ -1884,7 +1890,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial) priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f; /* 0 indicates GPIO mode, 1 is alternate function */ - priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) { + /* QFN20 is special... */ + if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE) /* GPIO 0 */ + priv->gpio_altfunc |= BIT(0); + if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */ + priv->gpio_altfunc |= BIT(1); + if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */ + priv->gpio_altfunc |= BIT(2); + if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */ + priv->gpio_altfunc |= BIT(3); + } else { + priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + } if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) { /* |