summaryrefslogtreecommitdiff
path: root/drivers/phy/amlogic/phy-meson-gxl-usb2.c
blob: db17c3448bfedbe6426ea2c5f4e66499c9e10d16 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Meson GXL and GXM USB2 PHY driver
 *
 * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>

/* bits [31:27] are read-only */
#define U2P_R0							0x0
	#define U2P_R0_BYPASS_SEL				BIT(0)
	#define U2P_R0_BYPASS_DM_EN				BIT(1)
	#define U2P_R0_BYPASS_DP_EN				BIT(2)
	#define U2P_R0_TXBITSTUFF_ENH				BIT(3)
	#define U2P_R0_TXBITSTUFF_EN				BIT(4)
	#define U2P_R0_DM_PULLDOWN				BIT(5)
	#define U2P_R0_DP_PULLDOWN				BIT(6)
	#define U2P_R0_DP_VBUS_VLD_EXT_SEL			BIT(7)
	#define U2P_R0_DP_VBUS_VLD_EXT				BIT(8)
	#define U2P_R0_ADP_PRB_EN				BIT(9)
	#define U2P_R0_ADP_DISCHARGE				BIT(10)
	#define U2P_R0_ADP_CHARGE				BIT(11)
	#define U2P_R0_DRV_VBUS					BIT(12)
	#define U2P_R0_ID_PULLUP				BIT(13)
	#define U2P_R0_LOOPBACK_EN_B				BIT(14)
	#define U2P_R0_OTG_DISABLE				BIT(15)
	#define U2P_R0_COMMON_ONN				BIT(16)
	#define U2P_R0_FSEL_MASK				GENMASK(19, 17)
	#define U2P_R0_REF_CLK_SEL_MASK				GENMASK(21, 20)
	#define U2P_R0_POWER_ON_RESET				BIT(22)
	#define U2P_R0_V_ATE_TEST_EN_B_MASK			GENMASK(24, 23)
	#define U2P_R0_ID_SET_ID_DQ				BIT(25)
	#define U2P_R0_ATE_RESET				BIT(26)
	#define U2P_R0_FSV_MINUS				BIT(27)
	#define U2P_R0_FSV_PLUS					BIT(28)
	#define U2P_R0_BYPASS_DM_DATA				BIT(29)
	#define U2P_R0_BYPASS_DP_DATA				BIT(30)

#define U2P_R1							0x4
	#define U2P_R1_BURN_IN_TEST				BIT(0)
	#define U2P_R1_ACA_ENABLE				BIT(1)
	#define U2P_R1_DCD_ENABLE				BIT(2)
	#define U2P_R1_VDAT_SRC_EN_B				BIT(3)
	#define U2P_R1_VDAT_DET_EN_B				BIT(4)
	#define U2P_R1_CHARGES_SEL				BIT(5)
	#define U2P_R1_TX_PREEMP_PULSE_TUNE			BIT(6)
	#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK			GENMASK(8, 7)
	#define U2P_R1_TX_RES_TUNE_MASK				GENMASK(10, 9)
	#define U2P_R1_TX_RISE_TUNE_MASK			GENMASK(12, 11)
	#define U2P_R1_TX_VREF_TUNE_MASK			GENMASK(16, 13)
	#define U2P_R1_TX_FSLS_TUNE_MASK			GENMASK(20, 17)
	#define U2P_R1_TX_HSXV_TUNE_MASK			GENMASK(22, 21)
	#define U2P_R1_OTG_TUNE_MASK				GENMASK(25, 23)
	#define U2P_R1_SQRX_TUNE_MASK				GENMASK(28, 26)
	#define U2P_R1_COMP_DIS_TUNE_MASK			GENMASK(31, 29)

/* bits [31:14] are read-only */
#define U2P_R2							0x8
	#define U2P_R2_TESTDATA_IN_MASK				GENMASK(7, 0)
	#define U2P_R2_TESTADDR_MASK				GENMASK(11, 8)
	#define U2P_R2_TESTDATA_OUT_SEL				BIT(12)
	#define U2P_R2_TESTCLK					BIT(13)
	#define U2P_R2_TESTDATA_OUT_MASK			GENMASK(17, 14)
	#define U2P_R2_ACA_PIN_RANGE_C				BIT(18)
	#define U2P_R2_ACA_PIN_RANGE_B				BIT(19)
	#define U2P_R2_ACA_PIN_RANGE_A				BIT(20)
	#define U2P_R2_ACA_PIN_GND				BIT(21)
	#define U2P_R2_ACA_PIN_FLOAT				BIT(22)
	#define U2P_R2_CHARGE_DETECT				BIT(23)
	#define U2P_R2_DEVICE_SESSION_VALID			BIT(24)
	#define U2P_R2_ADP_PROBE				BIT(25)
	#define U2P_R2_ADP_SENSE				BIT(26)
	#define U2P_R2_SESSION_END				BIT(27)
	#define U2P_R2_VBUS_VALID				BIT(28)
	#define U2P_R2_B_VALID					BIT(29)
	#define U2P_R2_A_VALID					BIT(30)
	#define U2P_R2_ID_DIG					BIT(31)

#define U2P_R3							0xc

#define RESET_COMPLETE_TIME				500

struct phy_meson_gxl_usb2_priv {
	struct regmap		*regmap;
	enum phy_mode		mode;
	int			is_enabled;
	struct clk		*clk;
	struct reset_control	*reset;
};

static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
	.reg_bits = 8,
	.val_bits = 32,
	.reg_stride = 4,
	.max_register = U2P_R3,
};

static int phy_meson_gxl_usb2_init(struct phy *phy)
{
	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
	int ret;

	ret = reset_control_reset(priv->reset);
	if (ret)
		return ret;

	ret = clk_prepare_enable(priv->clk);
	if (ret) {
		reset_control_rearm(priv->reset);
		return ret;
	}

	return 0;
}

static int phy_meson_gxl_usb2_exit(struct phy *phy)
{
	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

	clk_disable_unprepare(priv->clk);
	reset_control_rearm(priv->reset);

	return 0;
}

static int phy_meson_gxl_usb2_reset(struct phy *phy)
{
	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

	if (priv->is_enabled) {
		/* reset the PHY and wait until settings are stabilized */
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
				   U2P_R0_POWER_ON_RESET);
		udelay(RESET_COMPLETE_TIME);
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
				   0);
		udelay(RESET_COMPLETE_TIME);
	}

	return 0;
}

static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
				       enum phy_mode mode, int submode)
{
	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

	switch (mode) {
	case PHY_MODE_USB_HOST:
	case PHY_MODE_USB_OTG:
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
				   U2P_R0_DM_PULLDOWN);
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
				   U2P_R0_DP_PULLDOWN);
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
				   U2P_R0_ID_PULLUP);
		break;

	case PHY_MODE_USB_DEVICE:
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
				   0);
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
				   0);
		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
				   U2P_R0_ID_PULLUP);
		break;

	default:
		return -EINVAL;
	}

	phy_meson_gxl_usb2_reset(phy);

	priv->mode = mode;

	return 0;
}

static int phy_meson_gxl_usb2_power_off(struct phy *phy)
{
	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

	priv->is_enabled = 0;

	/* power off the PHY by putting it into reset mode */
	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
			   U2P_R0_POWER_ON_RESET);

	return 0;
}

static int phy_meson_gxl_usb2_power_on(struct phy *phy)
{
	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
	int ret;

	priv->is_enabled = 1;

	/* power on the PHY by taking it out of reset mode */
	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);

	ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
	if (ret) {
		phy_meson_gxl_usb2_power_off(phy);

		dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n",
			priv->mode);
		return ret;
	}

	return 0;
}

static const struct phy_ops phy_meson_gxl_usb2_ops = {
	.init		= phy_meson_gxl_usb2_init,
	.exit		= phy_meson_gxl_usb2_exit,
	.power_on	= phy_meson_gxl_usb2_power_on,
	.power_off	= phy_meson_gxl_usb2_power_off,
	.set_mode	= phy_meson_gxl_usb2_set_mode,
	.reset		= phy_meson_gxl_usb2_reset,
	.owner		= THIS_MODULE,
};

static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct phy_provider *phy_provider;
	struct phy_meson_gxl_usb2_priv *priv;
	struct phy *phy;
	void __iomem *base;
	int ret;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	platform_set_drvdata(pdev, priv);

	base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(base))
		return PTR_ERR(base);

	/* start in host mode */
	priv->mode = PHY_MODE_USB_HOST;

	priv->regmap = devm_regmap_init_mmio(dev, base,
					     &phy_meson_gxl_usb2_regmap_conf);
	if (IS_ERR(priv->regmap))
		return PTR_ERR(priv->regmap);

	priv->clk = devm_clk_get_optional(dev, "phy");
	if (IS_ERR(priv->clk))
		return PTR_ERR(priv->clk);

	priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
	if (IS_ERR(priv->reset))
		return PTR_ERR(priv->reset);

	phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
	if (IS_ERR(phy)) {
		ret = PTR_ERR(phy);
		if (ret != -EPROBE_DEFER)
			dev_err(dev, "failed to create PHY\n");

		return ret;
	}

	phy_set_drvdata(phy, priv);

	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);

	return PTR_ERR_OR_ZERO(phy_provider);
}

static const struct of_device_id phy_meson_gxl_usb2_of_match[] = {
	{ .compatible = "amlogic,meson-gxl-usb2-phy", },
	{ },
};
MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match);

static struct platform_driver phy_meson_gxl_usb2_driver = {
	.probe	= phy_meson_gxl_usb2_probe,
	.driver	= {
		.name		= "phy-meson-gxl-usb2",
		.of_match_table	= phy_meson_gxl_usb2_of_match,
	},
};
module_platform_driver(phy_meson_gxl_usb2_driver);

MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver");
MODULE_LICENSE("GPL v2");