diff options
Diffstat (limited to 'meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts')
| -rw-r--r-- | meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts | 254 |
1 files changed, 0 insertions, 254 deletions
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts deleted file mode 100644 index 4570fa6e0..000000000 --- a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts +++ /dev/null @@ -1,254 +0,0 @@ -/* -* dts file for MiniZed -* -* Copyright (C) 2018 Clément Laigle <clement.laigle8@gmail.com> -*/ - -/dts-v1/; -/include/ "zynq-7000.dtsi" - - -/ { - model = "Zynq Minized Board"; - compatible = "xlnx,zynq-Minized", "xlnx,zynq-7000"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - cpu@0 { - operating-points = <666666 1000000 333333 1000000>; - }; - }; - - aliases { - serial0 = &uart1; - serial1 = &bluetooth_uart; - spi0 = &qspi; - mmc0 = &sdhci1; - }; - - memory { - device_type = "memory"; - reg = <0 0x20000000>; - }; - - usb_phy0: phy0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0x0>; - }; - - leds { - compatible = "gpio-leds"; - led-psg { - label = "led-psg"; - gpios = <&gpio0 53 0>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - led-psr { - label = "led-psr"; - gpios = <&gpio0 52 0>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - sw3 { - label = "ps-bp"; - gpios = <&gpio0 0 0>; - linux,code = <108>; /* down */ - gpio-key,wakeup; - autorepeat; - }; - }; - - amba_pl: amba_pl { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges ; - - axi_gpio_0: gpio@41200000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x41200000 0x10000>; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x1>; - xlnx,all-outputs-2 = <0x1>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x1>; - xlnx,gpio2-width = <0x1>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x1>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - axi_gpio_1: gpio@41210000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x41210000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x1>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - axi_iic_0: i2c@41600000 { - #address-cells = <1>; - #size-cells = <0>; - clock-names = "ref_clk"; - clocks = <&clkc 15>; - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <&intc>; - interrupts = <0 30 4>; - reg = <0x41600000 0x10000>; - }; - bluetooth_uart: serial@43c00000 { - clock-frequency = <0x2dc6c00>; - clock-names = "ref_clk"; - clocks = <&clkc 0>; - compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a"; - current-speed = <115200>; - device_type = "serial"; - interrupt-parent = <&intc>; - interrupts = <0 29 4>; - port-number = <1>; - reg = <0x43c00000 0x10000>; - reg-offset = <0x1000>; - reg-shift = <2>; - xlnx,external-xin-clk-hz = <0x2dc6c00>; - xlnx,external-xin-clk-hz-d = <0x30>; - xlnx,has-external-rclk = <0x0>; - xlnx,has-external-xin = <0x1>; - xlnx,is-a-16550 = <0x1>; - xlnx,s-axi-aclk-freq-hz-d = "100.0"; - xlnx,use-modem-ports = <0x1>; - xlnx,use-user-ports = <0x1>; - }; - }; - - wlreg_on: wlreg-on { - compatible = "regulator-fixed"; - regulator-name = "wlreg_on"; - enable-active-high; - gpio = <&gpio0 56 0>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100>; - }; -}; - -&gpio0 { - emio-gpio-width = <4>; - gpio-mask-high = <0x0>; - gpio-mask-low = <0x5600>; -}; - -&intc { - num_cpus = <1>; - num_interrupts = <96>; -}; - -&uart1 { - status = "okay"; -}; - -&sdhci0 { - status = "okay"; - bus-width= <4>; - xlnx,has-cd = <0x0>; - xlnx,has-power = <0x0>; - xlnx,has-wp = <0x0>; - non-removeable; - broken-cd; - vmmc-supply = <&wlreg_on>; - - brcmf: brcmf@1 { - status = "okay"; - reg = <1>; - compatible = "brcm,bcm43430-fmac"; - }; -}; - -&sdhci1 { - status = "okay"; - non-removable; - bus-width = <4>; - max-frequency = <12000000>; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - broken-hpi; - }; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; - usb-reset = <&gpio0 7 0>; - usb-phy = <&usb_phy0>; -}; - -&uart1 { - u-boot,dm-pre-reloc; - status = "okay"; -}; - -&qspi { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <0x3>; - is-dual = <0x0>; - num-cs = <0x1>; - - - flash0: flash@0 { - compatible = "micron,m25p80"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - - partition@0x00000000 { - label = "boot"; - reg = <0x0 0xff0000>; - }; - partition@0x00270000 { - label = "kernel"; - reg = <0x270000 0xd80000>; - }; - partition@0x00ff0000 { - label = "bootenv"; - reg = <0xff0000 0x10000>; - }; - - partition@0x01000000 { - label = "spare"; - reg = <0x1000000 0x0>; - }; - - }; -}; - |