summaryrefslogtreecommitdiff
path: root/meta-bytedance
AgeCommit message (Collapse)AuthorFilesLines
2023-11-25treewide: add scarthgap to LAYERSERIES_COMPAT2.16.0-devPatrick Williams2-2/+2
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I28ee50fa55ae47dd7fd8c99f8f6db8f5f6dfa53d
2023-11-24treewide: add nanbield to LAYERSERIES_COMPATPatrick Williams2-2/+2
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I85272779478b66452acd11be93f5fea99e4c3a34
2023-10-11treewide: clean up webui selectionPatrick Williams1-1/+0
The webui-vue package is now enabled by default. Clean up all the meta layers to clean up the explicit enablement. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I4895be56c70d2c8666dd96cec18d2c097f0c05a3
2023-09-26linux-aspeed: Move to Linux v6.5Joel Stanley1-1/+1
This moves the OpenBMC kernel to a v6.5 base for ASPEED. The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device tress are now under an 'aspeed' subdirectory. This change means systems must describe the KERNEL_DEVICETREE with the aspeed directory prefix. There are 78 patches in the tree, with 40 of those patches not yet queued for merging in v6.6. The remaining out of tree patches include: Andrew Jeffery (6): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers ARM: dts: aspeed: witherspoon: Update max31785 node ipmi: kcs_bmc: Add a "raw" character device interface Cédric Le Goater (1): /dev/mem: add a devmem kernel parameter to activate the device Eddie James (16): ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl soc: aspeed: xdma: Add trace events i2c: core: Add mux root adapter operations iio: si7020: Lock root adapter to wait for reset eeprom: ee1004: Enable devices on multiple busses dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom eeprom: ee1004: Add OF matching support leds: pca955x: Refactor with helper functions and renaming leds: pca955x: Use pointers to driver data rather than I2C client leds: pca955x: Optimize probe led selection leds: pca955x: Add HW blink support leds: Ensure hardware blinking turns off when requested Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always Joel Stanley (14): net: ftgmac100: Ensure tx descriptor updates are visible ARM: aspeed: Add debugfs directory ARM: soc: aspeed: Add secure boot controller support dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM ARM: dts: nuvoton: npmc750-evb: Add default console tpm: tis-i2c: Add more compatible strings leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()" arm64: configs: Add Nuvoton NPCM defconfig ARM: configs: aspeed: Add new FSI drivers ARM: config: aspeed_g5: Enable SSIF BMC driver ARM: config: aspeed: Remove FIRMWARE_MEMMAP ARM: config: aspeed: Add Ampere SMPro drivers ARM: config: Add openbmc defconfig ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx Johannes Holland (1): dt-bindings: tpm: Add schema for TIS I2C devices Potin Lai (1): mtd: spi-nor: winbond: Add support for w25q01jvq Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-07-20ipmi-fru-parser: srcrev bump 06514028f8..7153343816Andrew Geissler1-4/+2
Patrick Williams (6): clang-format: copy latest and re-format writefrudata: remove vla strgfnhandler: suppress unused parameter warnings frup: suppress stringop-truncation warning scripts: accept absolute paths to YAML build: enable meson builds build: install strgfnhandler into ipmi-providers dir Vernon Mauery (1): Set new maintainer as Patrick Williams Willy Tu (1): fru-parser: Remove the use of mktime Switch to Meson. Change-Id: Iec9c41cc17a72f84248b8cd75f70353e053f17e2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-05-12Revert "Add socket-id for the first console"Andrew Jeffery1-1/+0
This reverts commit ec7cab9378f548e94ee4af83946b2583d1fc7194. ec7cab9378f5 ("Add socket-id for the first console") was only a partial fixup of the obmc-console configurations found in the tree. For historical reasons not all platforms that support multiple consoles install a client configuration file for all consoles. Instead they relied on some default behaviour that was removed in obmc-console's 4e7186918599 ("Fixed broken dbus interface for multiple consoles"). Applying the configuration changes in the manner of ec7cab9378f5 ("Add socket-id for the first console") resulted in an asymmetric configuration between the client and server, breaking some SSH SOL instances. As of ae2460d0b8e8 ("obmc-console: Provide a default value for `console-id`.") in obmc-console the requirement to specify `socket-id`[^1] is lifted. Instead, the configuration can choose to override a default value. This restores the original behaviour and unbreaks SSH SOL. [^1]: Now an alias of the `console-id` configuration key Websocket and IPMI consoles remain broken. A fix is under development that also takes a proper approach to supporting multiple consoles in bmcweb, and the same solution pattern can be applied in ipmid. More discussion of the problems involved can be found here: https://amboar.github.io/notes/2023/05/08/happenings-in-obmc-console.html Change-Id: I274284c791758f336da6d6301dc523bac2b5dd69 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2023-04-21Add socket-id for the first consoleNinad Palsule1-0/+1
This drop adds socket-id for first console. This was left out before but with the new design this parameter is required and enforced by obmc-console code. It is decided to set "socket-id = console0" initially because that is the current path used by bmcweb but in future you can change this value to whatever is appropriate. The console information is now available through the DBUS interface. Each console server register it's object path on DBUS. The leaf node of the object path is used to create a console path. For example in the following console0 the leaf node "console0" is used to make up the console path and the GUI will use console path "/console/console0" to connect to the console. busctl tree xyz.openbmc_project.Console.console0 `-/xyz `-/xyz/openbmc_project `-/xyz/openbmc_project/console `-/xyz/openbmc_project/console/console0 Here is a discord thread where new design was discussed. https://discord.com/channels/775381525260664832/1083551792094249051 Tested: Tested on the rainier system. Related commits: 1) phosphor-dbus-interface: https://gerrit.openbmc.org/c/openbmc/phosphor-dbus-interfaces/+/61486 2) obmc-console: https://gerrit.openbmc.org/c/openbmc/obmc-console/+/62496 3) bmcweb: https://gerrit.openbmc.org/c/openbmc/bmcweb/+/62525 Change-Id: I5fd06f3aac69872a3e5032d592a9b59711795cfe Signed-off-by: Ninad Palsule <ninadpalsule@us.ibm.com>
2023-04-14meta-bytedance: me-time-sync: fix shellcheck issuesPatrick Williams1-5/+5
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I49f7334245394be03e77cb455d9e4d461fdb5705
2023-04-14meta-bytedance: mac-check: fix shellcheck issuesPatrick Williams2-12/+18
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ie51238a6ab7baa9980b2a28014b036e5bd88a11a
2023-03-27treewide: switch '/usr/share' to datadirPatrick Williams3-5/+5
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I8ea79d284356629f5b7b24ad3a99336e9e2e297e
2023-01-13yocto:mickledore: add support for new yocto layerAndrew Geissler2-2/+2
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I8e54833ac78e540e9dd5011533d53ff9a3af6763
2022-11-22Fix meta-layer self-references in LICENSE filesZev Weiss1-1/+1
Two copy/paste errors, and one that didn't get updated when the meta-layer name changed. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Change-Id: I823f46a4f4c84cd0c3235ec9c1deaa3340472147
2022-09-30add langdale to compatible layerAndrew Geissler2-2/+2
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
2022-09-12treewide: handle more upstream TEMPLATECONF movePatrick Williams1-0/+0
We also need to move the conf-notes.txt files. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ic44e015c0216b526de4fec277ad42f162bca1f33
2022-09-09treewide: handle upstream TEMPLATECONF movePatrick Williams2-0/+0
The latest poky commit is requiring us to have all of our template configs in a subdirectory instead of directly in the `conf` directory. Without this we end up with errors during setup like: ``` Error: TEMPLATECONF value (which is .../openbmc/meta-facebook/meta-bletchley/conf) must point to meta-some-layer/conf/templates/template-name ``` Fix this by moving all of our template files into the 'default' template subdirectory (following the pattern of poky) and modifying `setup` as necessary to follow. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Iecefde73d55acbb6bc63ae3d68c4311adaf327ae
2022-06-21phosphor-host-ipmid: srcrev bump 33d90e182d..0e7a8af0e5Andrew Geissler1-4/+4
Harvey.Wu (2): dbus-sdr: fix SEL record Generator ID to fit SPEC dbus-sdr: fix the vector size in sdrWriteTable and sdrStatsTable Jian Zhang (1): Add data types to Value to extend setDbusProperty Vernon Mauery (1): fix header install Willy Tu (4): cleanup: Remove all warning errors for the Meson build support build: Add meson build for phosphor-host-ipmi build: move all shared_library/module to library with version suffix build: Remove dynamicsensor library if it is not enabled Change-Id: I92503c6625d1ec2bf88c0a28afac9b4eeb8fbd75 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Willy Tu <wltu@google.com>
2022-04-30treewide: remove meta-perlPatrick Williams1-1/+0
The only recipes which use content from meta-perl are openpower machines: ``` meta-openpower/recipes-bsp/pdata/pdata_git.bb: libxml-libxml-perl-native \ meta-yadro/meta-nicole/recipes-phosphor/logging/openpower-esel-parser_git.bb: libxml-libxml-perl-native \ ``` Remove meta-perl from the bblayers of every layer except openpower machines. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I51f1a8fbfbe879295c64d2339fc115dbd8823681
2022-04-22treewide: drop unused meta-security layerBrad Bishop1-1/+0
This was added with cde0f094f for libseccomp, but shortly after that upstream moved libseccomp from meta-security to core (241c7d2e6). As such, meta-security is no longer used or required. Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Change-Id: I371e54b11f6336720dfc6edf0ef733d22b7fb4f2
2022-04-12treewide: Update BB_DISKMON_DIRS useGeorge Liu1-4/+4
Per [1][2], Yocto is starting to deprecate ABORT and has replaced the "ABORT" action in BB_DISKMON_DIRS entries with "HALT". 1. https://wiki.yoctoproject.org/wiki/Inclusive_language 2. https://git.yoctoproject.org/poky/commit/?id=4f77505d94a8f6260933f457e9848d1d2fa98ce5 Tested: Built obmc-phosphor-image successfully and eliminate the following warnings: ``` WARNING: The BB_DISKMON_DIRS "ABORT" action has been renamed to "HALT", update configuration ``` Signed-off-by: George Liu <liuxiwei@inspur.com> Change-Id: If57d0ded9fac41e23b31b01e2a0e309ac7388148
2022-02-26treewide: remove image-prelink bbclass usagePatrick Williams1-1/+1
Upstream has removed the image-prelink bbclass[1], so remove it from any local.conf.sample that still has it enabled. 1. https://git.openembedded.org/openembedded-core/commit/?id=857baaf9e3d181ca18264e85d90b899fd94acff9 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I70f42f8816f5dea207fcf5c34837d6796b3f6bb6
2022-02-26treewide: support yocto kirkstone releasePatrick Williams2-2/+2
* Deprecate N-1 release (hardknott). * Enable N+1 release (kirkstone). Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
2022-02-22treewide: remove MAINTAINERSPatrick Williams1-46/+0
The MAINTAINERS files are no longer used and are out of date (references to IRC still exist in most of them). Remove them and rely on the OWNERS exclusively. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I0f5d2719ad97e218ce03c4503efe1b1c92ac455e
2021-12-08bytedance: g220a: Modify power-control configLotus Xu1-9/+44
Tested: Test on qemu ipmi chassis status cmd work correct Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I60d20bf58c21b5c81d5fbad7649c1e2b43351392
2021-12-02Remove BBLAYERS_NON_REMOVABLE variableAlexander Filippov1-12/+0
`BBLAYERS_NON_REMOVABLE` is obsolete and no longer required. As it said by Yocto documentation it can be used by `Hob` https://www.yoctoproject.org/docs/1.5.2/ref-manual/ref-manual.html#var-BBLAYERS_NON_REMOVABLE that already removed since Yocto-2.1 https://www.yoctoproject.org/tools-resources/projects/hob Change-Id: Ibc2d8268a9d837a81e9cf6b0131dba8d0a030a3f Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
2021-11-04bytedance: g220a: uart: Update the uart-routing pathLei YU1-8/+8
With the upstream aspeed-uart-routing changes, the user space interface needs to be updated to use the new path. Tested: Verify the SOL is working fine on g220a. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I4313d240b2778ef8070214eb19029b559588bcea
2021-11-04bytedance: g220a: Remove aspeed-uart-routing patchesLei YU3-571/+0
The aspeed-uart-routing patches are in openbmc linux tree now. Remove them from this layer. The remaining patch will be submitted to the openbmc linux tree as well and will be removed after it's merged. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I5d9db3701fe7b2e92e4960155c9b3e24fefdaf23
2021-11-04Partially revert "treewide: remove obmc-system-mgmt feature"Patrick Williams2-0/+3
The obmc-system-mgmt feature is currently used in the image to trigger inclusion of a virtual-provider which provides a number of packages many systems need. Partially revert the removal of this feature so that the outcome is: 1. The empty obmc-phosphor-sysd package is still removed. 2. By default the 'obmc-system-mgmt' feature is included, unless specifically exempted. 3. All EVB platforms remove the 'obmc-system-mgmt' feature since they have no system they are managing. This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526. Tested: * Built `bletchley` and confirmed `packagegroup-fb-apps-system` and `entity-manager` are present. ``` entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0 packagegroup-fb-apps-system all 1.0-r1 ``` * Built `witherspoon` and confirmed `packagegroup-op-apps-system` and `pdbg` are present. ``` packagegroup-op-apps-system noarch 1.0 pdbg arm1176jzs 3.3 ``` * Ran `bitbake -p` on `evb-ast2600` to confirm the undefined `virtual-obmc-system-mgmt` is not being included in the image. Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67 Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2021-10-26treewide: remove obmc-system-mgmt featurePatrick Williams2-3/+0
Every machine layer treats 'system-management' as either part of a package-group or removes the feature. The sample implementation in meta-phosphor is a do-nothing shell script (and up until recently was a Python script). There appears to be no useful purpose to this feature as a stand-alone concept, so remove it. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I20ca1fa8ff3cb01cac2d07d4ded84e0769e4514b
2021-10-26treewide: clean up use of OBMC_MACHINE_FEATURESPatrick Williams1-1/+1
Modify the machine meta-layer configs to remove the use of the OBMC_MACHINE_FEATURES indirection and favor the Yocto MACHINE_FEATURES variable instead. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ifafb79e4e4c010e9476b9547cd4982f5b645060e
2021-10-25bytedance: g220a: Remove node managerLei YU3-59/+0
The node manager is maintained in https://github.com/Intel-BMC/node-manager and it is not buildable with latest OpenBMC. The OpenBMC guideline[1] and the repotest[2] does not accept pathces in machine layers, so the patches to node-manager are not accepted. Remove the recipe for now, otherwise the build fails. [1]: https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md [2]: https://github.com/openbmc/openbmc-build-scripts/blob/master/build-setup.sh#L141 Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I735f5b4d9b1cfa0ff4c0e47d349f99e847c0a7bd
2021-09-24bytedance: g220a: linux: Fix patch confictLotus Xu3-43/+12
Remove ipmb patch that is upstreamed Fix uart patch conflict Tested: Build ok Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I3749aafb5957e1fda4d31ef44fb2b6b956baa94a
2021-09-16bitbake: Use IPK packaging for rootfs assemblyAndrew Jeffery1-1/+1
bitbake offers a choice of DEB, RPM or IPK packaging. To a degree the choice is functionally arbitrary for image generation but control over the package format becomes important if we want to: 1. Include runtime package management functionality in the firmware image 2. Mess about with the packages on the build system With respect to 1 the IPK format and opkg (an ipk package manager) are designed for embedded systems[1] - by contrast to RPMs have heavier dependencies and a greater impact on the size and complexity of the firmware image. Regarding 2, the embedded nature and the need for opkg to work without much fuss leads to a lower configuration barrier by comparison to RPMs. With ipk it becomes possible to reuse the packages built during image preparation for core analysis without needing to generate an SDK: ``` $ export LD_LIBRARY_PATH=./tmp/work/x86_64-linux/opkg-native/*/recipe-sysroot-native/usr/lib $ MY_DEBUG_ROOT=tmp/rootfs-debug $ ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \ -f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/*/opkg.conf \ -o $MY_DEBUG_ROOT \ update $ fakeroot ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \ -f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/opkg.conf \ -o $MY_DEBUG_ROOT \ install dbus-sensors dbus-sensors-dbg $ gdb-multiarch (gdb) set solib-absolute-prefix .../tmp/rootfs-debug (gdb) add-auto-load-safe-path .../tmp/rootfs-debug (gdb) file tmp/rootfs-debug/usr/bin/nvmesensor (gdb) core-file obmcdump_17_9597/core.nvmesensor.0.aae91b519d0e4e0e8bbe746e3f6cd25f.2779.9594000000 Core was generated by `/usr/bin/nvmesensor'. Program terminated with signal SIGABRT, Aborted. pthread_kill.c:45 45 pthread_kill.c: No such file or directory. (gdb) bt pthread_kill.c:45 ../sysdeps/posix/raise.c:26 /home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6 /home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6 /home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6 /home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6 "xyz.openbmc_project.NVMeSensor", this=0x488f04) at /usr/include/sdbusplus/bus.hpp:234 ../../../../../../workspace/sources/dbus-sensors/src/NVMeSensorMain.cpp:159 (gdb) ``` This approach documented in the Poky Reference Manual: https://www.yoctoproject.org/docs/1.0/poky-ref-manual/poky-ref-manual.html#platdev-gdb-remotedebug-launch-gdb-inferiorbins Switch all machines to IPK to align the debugging experience with upstream's documentation and to facilitate efficient use of packaged software at runtime. [1] https://openwrt.org/docs/guide-user/additional-software/opkg Change-Id: I8ef526add2d7a6790de1b3eb3fb85cd39b864f23 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2021-08-24treewide: remove gategarth from layer-supportPatrick Williams2-2/+2
We've typically kept these LAYERSERIES_COMPAT to 2 releases: the current and the upcoming. Remove 'gatesgarth' is it is now 2 releases back. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I5e812a94fed1738898af75c0fdee81996a5bbf20
2021-08-20bytedance: g220a: Fix the dest dir for x86-power-controlJohn Wang1-1/+1
Fix the environment variables of the destination directory Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: Iffd1ca218da9d9aeaff560ecf96c8b8267702994
2021-08-20bytedance: g220a: ipmi: Set G220A Device ID ConfigureHenry Tian1-0/+2
Config additional device Support and manufacturer ID Tested: ipmitool mc info and ipmitool fru Signed-off-by: Henry Tian <tianxiaofeng@bytedance.com> Change-Id: I08488b2c9f19e086eee8082242a9efdb96957e61
2021-08-20bytedance: g220a: ipmi: Add total power sensorLei YU2-3/+25
It adjusts some sensors' number and adds the total power sensor. Tested: Verify the "Total_Power" is shwon in ipmi sensor list. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I334fe602f949bbd95cb59bcdfba390ea5147df33
2021-08-20bytedance: g220a: virtual-sensor: Add associationsLei YU1-0/+72
Add virtual sensor's associations so that the sensors could be shown in Redfish and WebUI. Tested: Verify the Total_Power is shown in Redfish as below $ curl -k -H "X-Auth-Token: $token" https://${bmc}/redfish/v1/Chassis/G220A/Sensors/Total_Power { "@odata.id": "/redfish/v1/Chassis/G220A/Sensors/Total_Power", "@odata.type": "#Sensor.v1_0_0.Sensor", "Id": "Total_Power", "Name": "Total Power", "Reading": 514.0, "ReadingRangeMax": null, "ReadingRangeMin": null, "ReadingType": "Power", "ReadingUnits": "W", "Status": { "Health": "OK", "State": "Enabled" } } Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I0c9c84917364cad701f00fc3041d427a6e8750bc
2021-08-20bytedance: g220a: Add VR related virtual sensorsLei YU1-0/+292
Add below virtual sensors based on VR sensors: P0_DIMM_VR_Pwr = CPU0_DIMM_VR_0_Input_Power + CPU0_DIMM_VR_1_Input_Power P1_DIMM_VR_Pwr = CPU1_DIMM_VR_0_Output_Voltage + CPU1_DIMM_VR_1_Output_Voltage CPU0_VR_Pwr = CPU0_VR_0_Input_Power + CPU0_VR_1_Input_Power + CPU0_VR_2_Input_Power CPU1_VR_Pwr = CPU1_VR_0_Input_Power + CPU1_VR_1_Input_Power + CPU1_VR_2_Input_Power CPU0_VR_Temp = max(CPU0_VR_0_Temperature, CPU0_VR_1_Temperature, CPU0_VR_2_Temperature) CPU1_VR_Temp = max(CPU1_VR_0_Temperature , CPU1_VR_1_Temperature, CPU1_VR_2_Temperature) P0_DIMM_VR_Temp = max(CPU0_DIMM_VR_0_Temperature, CPU0_DIMM_VR_1_Temperature) P1_DIMM_VR_Temp = max(CPU1_DIMM_VR_0_Temperature, CPU1_DIMM_VR_1_Temperature) Tested: Verify the above sensors appear on DBus and the values are expected. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I9412e7da1a147b64cb43a5f9981042623cfb6423
2021-08-20bytedance: g220a: Add virtual-sensor packageLei YU3-0/+41
Add phosphor-virtual-sensor pakcage and configure it to enable "total_power" sensor that is the sum of PSU0/1's input power. Tested: Verify the Total_Power sensor is on DBus and the value is the sum or PSU0 and PSU1's input power. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: Ie8f61800299bef01a8bb74256c24d1f0a90df258
2021-08-17Fix path to udev rules filesAnton Blanchard2-3/+3
Use nonarch_base_libdir instead of base_libdir, because the files are always in /lib/udev/rules.d/. On ppc64le base_libdir is lib64, and the files end up in the wrong spot. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Change-Id: I3c24dae293f4166f1ed1826d09d4bde7cd7d0357
2021-08-17meta-bytedance: Fix incorrect Yocto syntaxLei YU1-2/+2
The `PREFERRED_PROVIDER` still uses `_` instead of `:`, fix it. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I34f27870ff35de8b14a8a546d42ab4a1fb5f30d1
2021-08-17meta-bytedance: increment CONF_VERSIONLei YU1-1/+1
Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I5aa8948c3eb5800b5b371403d3745d4c794d4eec
2021-08-13meta-bytedance: Cleanup for Yocto override syntax changeLei YU26-60/+60
convert-overrides.py meta-bytedance git grep -l _g220a -- meta-bytedance | grep ".bb" | \ xargs sed -i 's/_g220a/:g220a/' git grep -l _u-boot -- meta-bytedance | xargs sed -i \ 's/_u-boot/:u-boot/' Tested: $ git grep "_[a-z0-9_/-]*[ :]" -- meta-bytedance | grep ".bb" meta-bytedance/meta-g220a/recipes-phosphor/chassis/x86-power-control_%.bbappend:do_install:append() { meta-bytedance/meta-g220a/recipes-phosphor/configuration/entity-manager_%.bbappend:do_install:append() { meta-bytedance/meta-g220a/recipes-phosphor/console/obmc-console_%.bbappend:do_install:append() { meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend:do_install:append(){ meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-ipmi-kcs_%.bbappend:do_install:append() { meta-bytedance/recipes-core/systemd/systemd-conf_%.bbappend:do_install:append() { meta-bytedance/recipes-core/systemd/systemd_%.bbappend:do_install:append () { Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I26fb4c52012ee407ceb26c5a4120bf7b0b7a165a
2021-08-13meta-bytedance: Add honister layer compatLei YU2-2/+2
Add `honister` to LAYERSERIES_COMPAT for the next Yocto release. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I13918bf18f29e1d4ccb6e4421a94a005abb25c9e
2021-07-14bytedance: Limit coredump sizeLei YU3-0/+26
Override coredump.conf and set the max size of coredump to 2MiB. Tested: Verify systemd removes the old coredumps and makes sure the max size is around 2MiB. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I9ae2ba46edd2b1e1b12537f12ca09f97882a7d40
2021-07-14bytedance: g220a: Add some sensors in yamlLotus Xu1-25/+509
Tested: Run ipmitool sensor list and verify the output is as expected. Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: Ibd81144adf8cb1477a8963cc3b8331b72c1a928b
2021-07-14bytedance: g220a: Add retry for me-time-syncLotus Xu1-1/+8
ipmb may not be ready for communication when me-time-sync start. Add some retry so that the time could be synced. Tested: Test 10 times, me-time-sync can work well Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I93343d2ac17fc13b1d094bf05f424d9cb54cfa3f
2021-07-14bytedance: bmcweb: Increase http-body-limit to 65MiBLei YU1-1/+4
The default http-body-limit is 30 MiB, bytedance's system uses 64MiB chips so potentially the largest upload size is 64MiB+ (uncompressed tarball) Increase it to 65MiB so bmcweb accept such uploads. Tested: Upload a tarball that is larger than 32MiB, and verify it works fine. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I0551b34234b14c40d01ea61e88062572deb344c8
2021-07-02bytedance: g220a: node-manager: Remove total power sensorLei YU2-0/+39
The Total_Power sensor is not available on g220a system, add patch to remove it. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: Ibc70bec3d56b13740d3f17a666a8d0b0fa7c8429
2021-07-02bytedance: g220a: Enable phosphor-node-manager-proxyLotus Xu3-5/+30
Tested: Verify the CPU_Power and Memory_Power sensors are OK. Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I13fde13adc4062d5586167e411c129a986e3ad76
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-11 10:08:19 +0300