Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...

371 files changed, 18603 insertions, 8432 deletions

diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile
index ac8487dcff1d..4315652678b9 100644
--- a/tools/bpf/bpftool/Documentation/Makefile
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -31,9 +31,9 @@ see_also = $(subst " ",, \
 	"\n" \
 	"SEE ALSO\n" \
 	"========\n" \
-	"\t**bpf**\ (2),\n" \
-	"\t**bpf-helpers**\\ (7)" \
-	$(foreach page,$(call list_pages,$(1)),",\n\t**$(page)**\\ (8)") \
+	"**bpf**\ (2),\n" \
+	"**bpf-helpers**\\ (7)" \
+	$(foreach page,$(call list_pages,$(1)),",\n**$(page)**\\ (8)") \
 	"\n")
 
 $(OUTPUT)%.8: %.rst
diff --git a/tools/bpf/bpftool/Documentation/bpftool-btf.rst b/tools/bpf/bpftool/Documentation/bpftool-btf.rst
index 342716f74ec4..eaba24320fb2 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-btf.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-btf.rst
@@ -14,82 +14,76 @@ tool for inspection of BTF data
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **btf** *COMMAND*
+**bpftool** [*OPTIONS*] **btf** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| | { **-B** | **--base-btf** } }
+*OPTIONS* := { |COMMON_OPTIONS| | { **-B** | **--base-btf** } }
 
-	*COMMANDS* := { **dump** | **help** }
+*COMMANDS* := { **dump** | **help** }
 
 BTF COMMANDS
 =============
 
-|	**bpftool** **btf** { **show** | **list** } [**id** *BTF_ID*]
-|	**bpftool** **btf dump** *BTF_SRC* [**format** *FORMAT*]
-|	**bpftool** **btf help**
+| **bpftool** **btf** { **show** | **list** } [**id** *BTF_ID*]
+| **bpftool** **btf dump** *BTF_SRC* [**format** *FORMAT*]
+| **bpftool** **btf help**
 |
-|	*BTF_SRC* := { **id** *BTF_ID* | **prog** *PROG* | **map** *MAP* [{**key** | **value** | **kv** | **all**}] | **file** *FILE* }
-|	*FORMAT* := { **raw** | **c** }
-|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+| *BTF_SRC* := { **id** *BTF_ID* | **prog** *PROG* | **map** *MAP* [{**key** | **value** | **kv** | **all**}] | **file** *FILE* }
+| *FORMAT* := { **raw** | **c** }
+| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
+| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
 
 DESCRIPTION
 ===========
-	**bpftool btf { show | list }** [**id** *BTF_ID*]
-		  Show information about loaded BTF objects. If a BTF ID is
-		  specified, show information only about given BTF object,
-		  otherwise list all BTF objects currently loaded on the
-		  system.
+bpftool btf { show | list } [id *BTF_ID*]
+    Show information about loaded BTF objects. If a BTF ID is specified, show
+    information only about given BTF object, otherwise list all BTF objects
+    currently loaded on the system.
 
-		  Since Linux 5.8 bpftool is able to discover information about
-		  processes that hold open file descriptors (FDs) against BTF
-		  objects. On such kernels bpftool will automatically emit this
-		  information as well.
+    Since Linux 5.8 bpftool is able to discover information about processes
+    that hold open file descriptors (FDs) against BTF objects. On such kernels
+    bpftool will automatically emit this information as well.
 
-	**bpftool btf dump** *BTF_SRC*
-		  Dump BTF entries from a given *BTF_SRC*.
+bpftool btf dump *BTF_SRC*
+    Dump BTF entries from a given *BTF_SRC*.
 
-		  When **id** is specified, BTF object with that ID will be
-		  loaded and all its BTF types emitted.
+    When **id** is specified, BTF object with that ID will be loaded and all
+    its BTF types emitted.
 
-		  When **map** is provided, it's expected that map has
-		  associated BTF object with BTF types describing key and
-		  value. It's possible to select whether to dump only BTF
-		  type(s) associated with key (**key**), value (**value**),
-		  both key and value (**kv**), or all BTF types present in
-		  associated BTF object (**all**). If not specified, **kv**
-		  is assumed.
+    When **map** is provided, it's expected that map has associated BTF object
+    with BTF types describing key and value. It's possible to select whether to
+    dump only BTF type(s) associated with key (**key**), value (**value**),
+    both key and value (**kv**), or all BTF types present in associated BTF
+    object (**all**). If not specified, **kv** is assumed.
 
-		  When **prog** is provided, it's expected that program has
-		  associated BTF object with BTF types.
+    When **prog** is provided, it's expected that program has associated BTF
+    object with BTF types.
 
-		  When specifying *FILE*, an ELF file is expected, containing
-		  .BTF section with well-defined BTF binary format data,
-		  typically produced by clang or pahole.
+    When specifying *FILE*, an ELF file is expected, containing .BTF section
+    with well-defined BTF binary format data, typically produced by clang or
+    pahole.
 
-		  **format** option can be used to override default (raw)
-		  output format. Raw (**raw**) or C-syntax (**c**) output
-		  formats are supported.
+    **format** option can be used to override default (raw) output format. Raw
+    (**raw**) or C-syntax (**c**) output formats are supported.
 
-	**bpftool btf help**
-		  Print short help message.
+bpftool btf help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
-
-	-B, --base-btf *FILE*
-		  Pass a base BTF object. Base BTF objects are typically used
-		  with BTF objects for kernel modules. To avoid duplicating
-		  all kernel symbols required by modules, BTF objects for
-		  modules are "split", they are built incrementally on top of
-		  the kernel (vmlinux) BTF object. So the base BTF reference
-		  should usually point to the kernel BTF.
-
-		  When the main BTF object to process (for example, the
-		  module BTF to dump) is passed as a *FILE*, bpftool attempts
-		  to autodetect the path for the base object, and passing
-		  this option is optional. When the main BTF object is passed
-		  through other handles, this option becomes necessary.
+.. include:: common_options.rst
+
+-B, --base-btf *FILE*
+    Pass a base BTF object. Base BTF objects are typically used with BTF
+    objects for kernel modules. To avoid duplicating all kernel symbols
+    required by modules, BTF objects for modules are "split", they are
+    built incrementally on top of the kernel (vmlinux) BTF object. So the
+    base BTF reference should usually point to the kernel BTF.
+
+    When the main BTF object to process (for example, the module BTF to
+    dump) is passed as a *FILE*, bpftool attempts to autodetect the path
+    for the base object, and passing this option is optional. When the main
+    BTF object is passed through other handles, this option becomes
+    necessary.
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
index 2ce900f66d6e..e8185596a759 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -14,134 +14,125 @@ tool for inspection and simple manipulation of eBPF progs
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **cgroup** *COMMAND*
+**bpftool** [*OPTIONS*] **cgroup** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } }
+*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } }
 
-	*COMMANDS* :=
-	{ **show** | **list** | **tree** | **attach** | **detach** | **help** }
+*COMMANDS* :=
+{ **show** | **list** | **tree** | **attach** | **detach** | **help** }
 
 CGROUP COMMANDS
 ===============
 
-|	**bpftool** **cgroup** { **show** | **list** } *CGROUP* [**effective**]
-|	**bpftool** **cgroup tree** [*CGROUP_ROOT*] [**effective**]
-|	**bpftool** **cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*]
-|	**bpftool** **cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
-|	**bpftool** **cgroup help**
+| **bpftool** **cgroup** { **show** | **list** } *CGROUP* [**effective**]
+| **bpftool** **cgroup tree** [*CGROUP_ROOT*] [**effective**]
+| **bpftool** **cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*]
+| **bpftool** **cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
+| **bpftool** **cgroup help**
 |
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
-|	*ATTACH_TYPE* := { **cgroup_inet_ingress** | **cgroup_inet_egress** |
-|		**cgroup_inet_sock_create** | **cgroup_sock_ops** |
-|		**cgroup_device** | **cgroup_inet4_bind** | **cgroup_inet6_bind** |
-|		**cgroup_inet4_post_bind** | **cgroup_inet6_post_bind** |
-|		**cgroup_inet4_connect** | **cgroup_inet6_connect** |
-|		**cgroup_unix_connect** | **cgroup_inet4_getpeername** |
-|		**cgroup_inet6_getpeername** | **cgroup_unix_getpeername** |
-|		**cgroup_inet4_getsockname** | **cgroup_inet6_getsockname** |
-|		**cgroup_unix_getsockname** | **cgroup_udp4_sendmsg** |
-|		**cgroup_udp6_sendmsg** | **cgroup_unix_sendmsg** |
-|		**cgroup_udp4_recvmsg** | **cgroup_udp6_recvmsg** |
-|		**cgroup_unix_recvmsg** | **cgroup_sysctl** |
-|		**cgroup_getsockopt** | **cgroup_setsockopt** |
-|		**cgroup_inet_sock_release** }
-|	*ATTACH_FLAGS* := { **multi** | **override** }
+| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
+| *ATTACH_TYPE* := { **cgroup_inet_ingress** | **cgroup_inet_egress** |
+|     **cgroup_inet_sock_create** | **cgroup_sock_ops** |
+|     **cgroup_device** | **cgroup_inet4_bind** | **cgroup_inet6_bind** |
+|     **cgroup_inet4_post_bind** | **cgroup_inet6_post_bind** |
+|     **cgroup_inet4_connect** | **cgroup_inet6_connect** |
+|     **cgroup_unix_connect** | **cgroup_inet4_getpeername** |
+|     **cgroup_inet6_getpeername** | **cgroup_unix_getpeername** |
+|     **cgroup_inet4_getsockname** | **cgroup_inet6_getsockname** |
+|     **cgroup_unix_getsockname** | **cgroup_udp4_sendmsg** |
+|     **cgroup_udp6_sendmsg** | **cgroup_unix_sendmsg** |
+|     **cgroup_udp4_recvmsg** | **cgroup_udp6_recvmsg** |
+|     **cgroup_unix_recvmsg** | **cgroup_sysctl** |
+|     **cgroup_getsockopt** | **cgroup_setsockopt** |
+|     **cgroup_inet_sock_release** }
+| *ATTACH_FLAGS* := { **multi** | **override** }
 
 DESCRIPTION
 ===========
-	**bpftool cgroup { show | list }** *CGROUP* [**effective**]
-		  List all programs attached to the cgroup *CGROUP*.
-
-		  Output will start with program ID followed by attach type,
-		  attach flags and program name.
-
-		  If **effective** is specified retrieve effective programs that
-		  will execute for events within a cgroup. This includes
-		  inherited along with attached ones.
-
-	**bpftool cgroup tree** [*CGROUP_ROOT*] [**effective**]
-		  Iterate over all cgroups in *CGROUP_ROOT* and list all
-		  attached programs. If *CGROUP_ROOT* is not specified,
-		  bpftool uses cgroup v2 mountpoint.
-
-		  The output is similar to the output of cgroup show/list
-		  commands: it starts with absolute cgroup path, followed by
-		  program ID, attach type, attach flags and program name.
-
-		  If **effective** is specified retrieve effective programs that
-		  will execute for events within a cgroup. This includes
-		  inherited along with attached ones.
-
-	**bpftool cgroup attach** *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*]
-		  Attach program *PROG* to the cgroup *CGROUP* with attach type
-		  *ATTACH_TYPE* and optional *ATTACH_FLAGS*.
-
-		  *ATTACH_FLAGS* can be one of: **override** if a sub-cgroup installs
-		  some bpf program, the program in this cgroup yields to sub-cgroup
-		  program; **multi** if a sub-cgroup installs some bpf program,
-		  that cgroup program gets run in addition to the program in this
-		  cgroup.
-
-		  Only one program is allowed to be attached to a cgroup with
-		  no attach flags or the **override** flag. Attaching another
-		  program will release old program and attach the new one.
-
-		  Multiple programs are allowed to be attached to a cgroup with
-		  **multi**. They are executed in FIFO order (those that were
-		  attached first, run first).
-
-		  Non-default *ATTACH_FLAGS* are supported by kernel version 4.14
-		  and later.
-
-		  *ATTACH_TYPE* can be on of:
-		  **ingress** ingress path of the inet socket (since 4.10);
-		  **egress** egress path of the inet socket (since 4.10);
-		  **sock_create** opening of an inet socket (since 4.10);
-		  **sock_ops** various socket operations (since 4.12);
-		  **device** device access (since 4.15);
-		  **bind4** call to bind(2) for an inet4 socket (since 4.17);
-		  **bind6** call to bind(2) for an inet6 socket (since 4.17);
-		  **post_bind4** return from bind(2) for an inet4 socket (since 4.17);
-		  **post_bind6** return from bind(2) for an inet6 socket (since 4.17);
-		  **connect4** call to connect(2) for an inet4 socket (since 4.17);
-		  **connect6** call to connect(2) for an inet6 socket (since 4.17);
-		  **connect_unix** call to connect(2) for a unix socket (since 6.7);
-		  **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an
-		  unconnected udp4 socket (since 4.18);
-		  **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an
-		  unconnected udp6 socket (since 4.18);
-		  **sendmsg_unix** call to sendto(2), sendmsg(2), sendmmsg(2) for
-		  an unconnected unix socket (since 6.7);
-		  **recvmsg4** call to recvfrom(2), recvmsg(2), recvmmsg(2) for
-		  an unconnected udp4 socket (since 5.2);
-		  **recvmsg6** call to recvfrom(2), recvmsg(2), recvmmsg(2) for
-		  an unconnected udp6 socket (since 5.2);
-		  **recvmsg_unix** call to recvfrom(2), recvmsg(2), recvmmsg(2) for
-		  an unconnected unix socket (since 6.7);
-		  **sysctl** sysctl access (since 5.2);
-		  **getsockopt** call to getsockopt (since 5.3);
-		  **setsockopt** call to setsockopt (since 5.3);
-		  **getpeername4** call to getpeername(2) for an inet4 socket (since 5.8);
-		  **getpeername6** call to getpeername(2) for an inet6 socket (since 5.8);
-		  **getpeername_unix** call to getpeername(2) for a unix socket (since 6.7);
-		  **getsockname4** call to getsockname(2) for an inet4 socket (since 5.8);
-		  **getsockname6** call to getsockname(2) for an inet6 socket (since 5.8).
-		  **getsockname_unix** call to getsockname(2) for a unix socket (since 6.7);
-		  **sock_release** closing an userspace inet socket (since 5.9).
-
-	**bpftool cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
-		  Detach *PROG* from the cgroup *CGROUP* and attach type
-		  *ATTACH_TYPE*.
-
-	**bpftool prog help**
-		  Print short help message.
+bpftool cgroup { show | list } *CGROUP* [effective]
+    List all programs attached to the cgroup *CGROUP*.
+
+    Output will start with program ID followed by attach type, attach flags and
+    program name.
+
+    If **effective** is specified retrieve effective programs that will execute
+    for events within a cgroup. This includes inherited along with attached
+    ones.
+
+bpftool cgroup tree [*CGROUP_ROOT*] [effective]
+    Iterate over all cgroups in *CGROUP_ROOT* and list all attached programs.
+    If *CGROUP_ROOT* is not specified, bpftool uses cgroup v2 mountpoint.
+
+    The output is similar to the output of cgroup show/list commands: it starts
+    with absolute cgroup path, followed by program ID, attach type, attach
+    flags and program name.
+
+    If **effective** is specified retrieve effective programs that will execute
+    for events within a cgroup. This includes inherited along with attached
+    ones.
+
+bpftool cgroup attach *CGROUP* *ATTACH_TYPE* *PROG* [*ATTACH_FLAGS*]
+    Attach program *PROG* to the cgroup *CGROUP* with attach type *ATTACH_TYPE*
+    and optional *ATTACH_FLAGS*.
+
+    *ATTACH_FLAGS* can be one of: **override** if a sub-cgroup installs some
+    bpf program, the program in this cgroup yields to sub-cgroup program;
+    **multi** if a sub-cgroup installs some bpf program, that cgroup program
+    gets run in addition to the program in this cgroup.
+
+    Only one program is allowed to be attached to a cgroup with no attach flags
+    or the **override** flag. Attaching another program will release old
+    program and attach the new one.
+
+    Multiple programs are allowed to be attached to a cgroup with **multi**.
+    They are executed in FIFO order (those that were attached first, run
+    first).
+
+    Non-default *ATTACH_FLAGS* are supported by kernel version 4.14 and later.
+
+    *ATTACH_TYPE* can be one of:
+
+    - **ingress** ingress path of the inet socket (since 4.10)
+    - **egress** egress path of the inet socket (since 4.10)
+    - **sock_create** opening of an inet socket (since 4.10)
+    - **sock_ops** various socket operations (since 4.12)
+    - **device** device access (since 4.15)
+    - **bind4** call to bind(2) for an inet4 socket (since 4.17)
+    - **bind6** call to bind(2) for an inet6 socket (since 4.17)
+    - **post_bind4** return from bind(2) for an inet4 socket (since 4.17)
+    - **post_bind6** return from bind(2) for an inet6 socket (since 4.17)
+    - **connect4** call to connect(2) for an inet4 socket (since 4.17)
+    - **connect6** call to connect(2) for an inet6 socket (since 4.17)
+    - **connect_unix** call to connect(2) for a unix socket (since 6.7)
+    - **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected udp4 socket (since 4.18)
+    - **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected udp6 socket (since 4.18)
+    - **sendmsg_unix** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected unix socket (since 6.7)
+    - **recvmsg4** call to recvfrom(2), recvmsg(2), recvmmsg(2) for an unconnected udp4 socket (since 5.2)
+    - **recvmsg6** call to recvfrom(2), recvmsg(2), recvmmsg(2) for an unconnected udp6 socket (since 5.2)
+    - **recvmsg_unix** call to recvfrom(2), recvmsg(2), recvmmsg(2) for an unconnected unix socket (since 6.7)
+    - **sysctl** sysctl access (since 5.2)
+    - **getsockopt** call to getsockopt (since 5.3)
+    - **setsockopt** call to setsockopt (since 5.3)
+    - **getpeername4** call to getpeername(2) for an inet4 socket (since 5.8)
+    - **getpeername6** call to getpeername(2) for an inet6 socket (since 5.8)
+    - **getpeername_unix** call to getpeername(2) for a unix socket (since 6.7)
+    - **getsockname4** call to getsockname(2) for an inet4 socket (since 5.8)
+    - **getsockname6** call to getsockname(2) for an inet6 socket (since 5.8)
+    - **getsockname_unix** call to getsockname(2) for a unix socket (since 6.7)
+    - **sock_release** closing a userspace inet socket (since 5.9)
+
+bpftool cgroup detach *CGROUP* *ATTACH_TYPE* *PROG*
+    Detach *PROG* from the cgroup *CGROUP* and attach type *ATTACH_TYPE*.
+
+bpftool prog help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
-	-f, --bpffs
-		  Show file names of pinned programs.
+-f, --bpffs
+    Show file names of pinned programs.
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-feature.rst b/tools/bpf/bpftool/Documentation/bpftool-feature.rst
index e44039f89be7..c7f837898bc7 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-feature.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-feature.rst
@@ -14,77 +14,70 @@ tool for inspection of eBPF-related parameters for Linux kernel or net device
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **feature** *COMMAND*
+**bpftool** [*OPTIONS*] **feature** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| }
+*OPTIONS* := { |COMMON_OPTIONS| }
 
-	*COMMANDS* := { **probe** | **help** }
+*COMMANDS* := { **probe** | **help** }
 
 FEATURE COMMANDS
 ================
 
-|	**bpftool** **feature probe** [*COMPONENT*] [**full**] [**unprivileged**] [**macros** [**prefix** *PREFIX*]]
-|	**bpftool** **feature list_builtins** *GROUP*
-|	**bpftool** **feature help**
+| **bpftool** **feature probe** [*COMPONENT*] [**full**] [**unprivileged**] [**macros** [**prefix** *PREFIX*]]
+| **bpftool** **feature list_builtins** *GROUP*
+| **bpftool** **feature help**
 |
-|	*COMPONENT* := { **kernel** | **dev** *NAME* }
-|	*GROUP* := { **prog_types** | **map_types** | **attach_types** | **link_types** | **helpers** }
+| *COMPONENT* := { **kernel** | **dev** *NAME* }
+| *GROUP* := { **prog_types** | **map_types** | **attach_types** | **link_types** | **helpers** }
 
 DESCRIPTION
 ===========
-	**bpftool feature probe** [**kernel**] [**full**] [**macros** [**prefix** *PREFIX*]]
-		  Probe the running kernel and dump a number of eBPF-related
-		  parameters, such as availability of the **bpf**\ () system call,
-		  JIT status, eBPF program types availability, eBPF helper
-		  functions availability, and more.
-
-		  By default, bpftool **does not run probes** for
-		  **bpf_probe_write_user**\ () and **bpf_trace_printk**\()
-		  helpers which print warnings to kernel logs. To enable them
-		  and run all probes, the **full** keyword should be used.
-
-		  If the **macros** keyword (but not the **-j** option) is
-		  passed, a subset of the output is dumped as a list of
-		  **#define** macros that are ready to be included in a C
-		  header file, for example. If, additionally, **prefix** is
-		  used to define a *PREFIX*, the provided string will be used
-		  as a prefix to the names of the macros: this can be used to
-		  avoid conflicts on macro names when including the output of
-		  this command as a header file.
-
-		  Keyword **kernel** can be omitted. If no probe target is
-		  specified, probing the kernel is the default behaviour.
-
-		  When the **unprivileged** keyword is used, bpftool will dump
-		  only the features available to a user who does not have the
-		  **CAP_SYS_ADMIN** capability set. The features available in
-		  that case usually represent a small subset of the parameters
-		  supported by the system. Unprivileged users MUST use the
-		  **unprivileged** keyword: This is to avoid misdetection if
-		  bpftool is inadvertently run as non-root, for example. This
-		  keyword is unavailable if bpftool was compiled without
-		  libcap.
-
-	**bpftool feature probe dev** *NAME* [**full**] [**macros** [**prefix** *PREFIX*]]
-		  Probe network device for supported eBPF features and dump
-		  results to the console.
-
-		  The keywords **full**, **macros** and **prefix** have the
-		  same role as when probing the kernel.
-
-	**bpftool feature list_builtins** *GROUP*
-		  List items known to bpftool. These can be BPF program types
-		  (**prog_types**), BPF map types (**map_types**), attach types
-		  (**attach_types**), link types (**link_types**), or BPF helper
-		  functions (**helpers**). The command does not probe the system, but
-		  simply lists the elements that bpftool knows from compilation time,
-		  as provided from libbpf (for all object types) or from the BPF UAPI
-		  header (list of helpers). This can be used in scripts to iterate over
-		  BPF types or helpers.
-
-	**bpftool feature help**
-		  Print short help message.
+bpftool feature probe [kernel] [full] [macros [prefix *PREFIX*]]
+    Probe the running kernel and dump a number of eBPF-related parameters, such
+    as availability of the **bpf**\ () system call, JIT status, eBPF program
+    types availability, eBPF helper functions availability, and more.
+
+    By default, bpftool **does not run probes** for **bpf_probe_write_user**\
+    () and **bpf_trace_printk**\() helpers which print warnings to kernel logs.
+    To enable them and run all probes, the **full** keyword should be used.
+
+    If the **macros** keyword (but not the **-j** option) is passed, a subset
+    of the output is dumped as a list of **#define** macros that are ready to
+    be included in a C header file, for example. If, additionally, **prefix**
+    is used to define a *PREFIX*, the provided string will be used as a prefix
+    to the names of the macros: this can be used to avoid conflicts on macro
+    names when including the output of this command as a header file.
+
+    Keyword **kernel** can be omitted. If no probe target is specified, probing
+    the kernel is the default behaviour.
+
+    When the **unprivileged** keyword is used, bpftool will dump only the
+    features available to a user who does not have the **CAP_SYS_ADMIN**
+    capability set. The features available in that case usually represent a
+    small subset of the parameters supported by the system. Unprivileged users
+    MUST use the **unprivileged** keyword: This is to avoid misdetection if
+    bpftool is inadvertently run as non-root, for example. This keyword is
+    unavailable if bpftool was compiled without libcap.
+
+bpftool feature probe dev *NAME* [full] [macros [prefix *PREFIX*]]
+    Probe network device for supported eBPF features and dump results to the
+    console.
+
+    The keywords **full**, **macros** and **prefix** have the same role as when
+    probing the kernel.
+
+bpftool feature list_builtins *GROUP*
+    List items known to bpftool. These can be BPF program types
+    (**prog_types**), BPF map types (**map_types**), attach types
+    (**attach_types**), link types (**link_types**), or BPF helper functions
+    (**helpers**). The command does not probe the system, but simply lists the
+    elements that bpftool knows from compilation time, as provided from libbpf
+    (for all object types) or from the BPF UAPI header (list of helpers). This
+    can be used in scripts to iterate over BPF types or helpers.
+
+bpftool feature help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
diff --git a/tools/bpf/bpftool/Documentation/bpftool-gen.rst b/tools/bpf/bpftool/Documentation/bpftool-gen.rst
index 5e60825818dd..c768e6d4ae09 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-gen.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-gen.rst
@@ -14,199 +14,177 @@ tool for BPF code-generation
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **gen** *COMMAND*
+**bpftool** [*OPTIONS*] **gen** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| | { **-L** | **--use-loader** } }
+*OPTIONS* := { |COMMON_OPTIONS| | { **-L** | **--use-loader** } }
 
-	*COMMAND* := { **object** | **skeleton** | **help** }
+*COMMAND* := { **object** | **skeleton** | **help** }
 
 GEN COMMANDS
 =============
 
-|	**bpftool** **gen object** *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...]
-|	**bpftool** **gen skeleton** *FILE* [**name** *OBJECT_NAME*]
-|	**bpftool** **gen subskeleton** *FILE* [**name** *OBJECT_NAME*]
-|	**bpftool** **gen min_core_btf** *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...]
-|	**bpftool** **gen help**
+| **bpftool** **gen object** *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...]
+| **bpftool** **gen skeleton** *FILE* [**name** *OBJECT_NAME*]
+| **bpftool** **gen subskeleton** *FILE* [**name** *OBJECT_NAME*]
+| **bpftool** **gen min_core_btf** *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...]
+| **bpftool** **gen help**
 
 DESCRIPTION
 ===========
-	**bpftool gen object** *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...]
-		  Statically link (combine) together one or more *INPUT_FILE*'s
-		  into a single resulting *OUTPUT_FILE*. All the files involved
-		  are BPF ELF object files.
-
-		  The rules of BPF static linking are mostly the same as for
-		  user-space object files, but in addition to combining data
-		  and instruction sections, .BTF and .BTF.ext (if present in
-		  any of the input files) data are combined together. .BTF
-		  data is deduplicated, so all the common types across
-		  *INPUT_FILE*'s will only be represented once in the resulting
-		  BTF information.
-
-		  BPF static linking allows to partition BPF source code into
-		  individually compiled files that are then linked into
-		  a single resulting BPF object file, which can be used to
-		  generated BPF skeleton (with **gen skeleton** command) or
-		  passed directly into **libbpf** (using **bpf_object__open()**
-		  family of APIs).
-
-	**bpftool gen skeleton** *FILE*
-		  Generate BPF skeleton C header file for a given *FILE*.
-
-		  BPF skeleton is an alternative interface to existing libbpf
-		  APIs for working with BPF objects. Skeleton code is intended
-		  to significantly shorten and simplify code to load and work
-		  with BPF programs from userspace side. Generated code is
-		  tailored to specific input BPF object *FILE*, reflecting its
-		  structure by listing out available maps, program, variables,
-		  etc. Skeleton eliminates the need to lookup mentioned
-		  components by name. Instead, if skeleton instantiation
-		  succeeds, they are populated in skeleton structure as valid
-		  libbpf types (e.g., **struct bpf_map** pointer) and can be
-		  passed to existing generic libbpf APIs.
-
-		  In addition to simple and reliable access to maps and
-		  programs, skeleton provides a storage for BPF links (**struct
-		  bpf_link**) for each BPF program within BPF object. When
-		  requested, supported BPF programs will be automatically
-		  attached and resulting BPF links stored for further use by
-		  user in pre-allocated fields in skeleton struct. For BPF
-		  programs that can't be automatically attached by libbpf,
-		  user can attach them manually, but store resulting BPF link
-		  in per-program link field. All such set up links will be
-		  automatically destroyed on BPF skeleton destruction. This
-		  eliminates the need for users to manage links manually and
-		  rely on libbpf support to detach programs and free up
-		  resources.
-
-		  Another facility provided by BPF skeleton is an interface to
-		  global variables of all supported kinds: mutable, read-only,
-		  as well as extern ones. This interface allows to pre-setup
-		  initial values of variables before BPF object is loaded and
-		  verified by kernel. For non-read-only variables, the same
-		  interface can be used to fetch values of global variables on
-		  userspace side, even if they are modified by BPF code.
-
-		  During skeleton generation, contents of source BPF object
-		  *FILE* is embedded within generated code and is thus not
-		  necessary to keep around. This ensures skeleton and BPF
-		  object file are matching 1-to-1 and always stay in sync.
-		  Generated code is dual-licensed under LGPL-2.1 and
-		  BSD-2-Clause licenses.
-
-		  It is a design goal and guarantee that skeleton interfaces
-		  are interoperable with generic libbpf APIs. User should
-		  always be able to use skeleton API to create and load BPF
-		  object, and later use libbpf APIs to keep working with
-		  specific maps, programs, etc.
-
-		  As part of skeleton, few custom functions are generated.
-		  Each of them is prefixed with object name. Object name can
-		  either be derived from object file name, i.e., if BPF object
-		  file name is **example.o**, BPF object name will be
-		  **example**. Object name can be also specified explicitly
-		  through **name** *OBJECT_NAME* parameter. The following
-		  custom functions are provided (assuming **example** as
-		  the object name):
-
-		  - **example__open** and **example__open_opts**.
-		    These functions are used to instantiate skeleton. It
-		    corresponds to libbpf's **bpf_object__open**\ () API.
-		    **_opts** variants accepts extra **bpf_object_open_opts**
-		    options.
-
-		  - **example__load**.
-		    This function creates maps, loads and verifies BPF
-		    programs, initializes global data maps. It corresponds to
-		    libppf's **bpf_object__load**\ () API.
-
-		  - **example__open_and_load** combines **example__open** and
-		    **example__load** invocations in one commonly used
-		    operation.
-
-		  - **example__attach** and **example__detach**
-		    This pair of functions allow to attach and detach,
-		    correspondingly, already loaded BPF object. Only BPF
-		    programs of types supported by libbpf for auto-attachment
-		    will be auto-attached and their corresponding BPF links
-		    instantiated. For other BPF programs, user can manually
-		    create a BPF link and assign it to corresponding fields in
-		    skeleton struct. **example__detach** will detach both
-		    links created automatically, as well as those populated by
-		    user manually.
-
-		  - **example__destroy**
-		    Detach and unload BPF programs, free up all the resources
-		    used by skeleton and BPF object.
-
-		  If BPF object has global variables, corresponding structs
-		  with memory layout corresponding to global data data section
-		  layout will be created. Currently supported ones are: *.data*,
-		  *.bss*, *.rodata*, and *.kconfig* structs/data sections.
-		  These data sections/structs can be used to set up initial
-		  values of variables, if set before **example__load**.
-		  Afterwards, if target kernel supports memory-mapped BPF
-		  arrays, same structs can be used to fetch and update
-		  (non-read-only) data from userspace, with same simplicity
-		  as for BPF side.
-
-	**bpftool gen subskeleton** *FILE*
-		  Generate BPF subskeleton C header file for a given *FILE*.
-
-		  Subskeletons are similar to skeletons, except they do not own
-		  the corresponding maps, programs, or global variables. They
-		  require that the object file used to generate them is already
-		  loaded into a *bpf_object* by some other means.
-
-		  This functionality is useful when a library is included into a
-		  larger BPF program. A subskeleton for the library would have
-		  access to all objects and globals defined in it, without
-		  having to know about the larger program.
-
-		  Consequently, there are only two functions defined
-		  for subskeletons:
-
-		  - **example__open(bpf_object\*)**
-		    Instantiates a subskeleton from an already opened (but not
-		    necessarily loaded) **bpf_object**.
-
-		  - **example__destroy()**
-		    Frees the storage for the subskeleton but *does not* unload
-		    any BPF programs or maps.
-
-	**bpftool** **gen min_core_btf** *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...]
-		  Generate a minimum BTF file as *OUTPUT*, derived from a given
-		  *INPUT* BTF file, containing all needed BTF types so one, or
-		  more, given eBPF objects CO-RE relocations may be satisfied.
-
-		  When kernels aren't compiled with CONFIG_DEBUG_INFO_BTF,
-		  libbpf, when loading an eBPF object, has to rely on external
-		  BTF files to be able to calculate CO-RE relocations.
-
-		  Usually, an external BTF file is built from existing kernel
-		  DWARF data using pahole. It contains all the types used by
-		  its respective kernel image and, because of that, is big.
-
-		  The min_core_btf feature builds smaller BTF files, customized
-		  to one or multiple eBPF objects, so they can be distributed
-		  together with an eBPF CO-RE based application, turning the
-		  application portable to different kernel versions.
-
-		  Check examples bellow for more information how to use it.
-
-	**bpftool gen help**
-		  Print short help message.
+bpftool gen object *OUTPUT_FILE* *INPUT_FILE* [*INPUT_FILE*...]
+    Statically link (combine) together one or more *INPUT_FILE*'s into a single
+    resulting *OUTPUT_FILE*. All the files involved are BPF ELF object files.
+
+    The rules of BPF static linking are mostly the same as for user-space
+    object files, but in addition to combining data and instruction sections,
+    .BTF and .BTF.ext (if present in any of the input files) data are combined
+    together. .BTF data is deduplicated, so all the common types across
+    *INPUT_FILE*'s will only be represented once in the resulting BTF
+    information.
+
+    BPF static linking allows to partition BPF source code into individually
+    compiled files that are then linked into a single resulting BPF object
+    file, which can be used to generated BPF skeleton (with **gen skeleton**
+    command) or passed directly into **libbpf** (using **bpf_object__open()**
+    family of APIs).
+
+bpftool gen skeleton *FILE*
+    Generate BPF skeleton C header file for a given *FILE*.
+
+    BPF skeleton is an alternative interface to existing libbpf APIs for
+    working with BPF objects. Skeleton code is intended to significantly
+    shorten and simplify code to load and work with BPF programs from userspace
+    side. Generated code is tailored to specific input BPF object *FILE*,
+    reflecting its structure by listing out available maps, program, variables,
+    etc. Skeleton eliminates the need to lookup mentioned components by name.
+    Instead, if skeleton instantiation succeeds, they are populated in skeleton
+    structure as valid libbpf types (e.g., **struct bpf_map** pointer) and can
+    be passed to existing generic libbpf APIs.
+
+    In addition to simple and reliable access to maps and programs, skeleton
+    provides a storage for BPF links (**struct bpf_link**) for each BPF program
+    within BPF object. When requested, supported BPF programs will be
+    automatically attached and resulting BPF links stored for further use by
+    user in pre-allocated fields in skeleton struct. For BPF programs that
+    can't be automatically attached by libbpf, user can attach them manually,
+    but store resulting BPF link in per-program link field. All such set up
+    links will be automatically destroyed on BPF skeleton destruction. This
+    eliminates the need for users to manage links manually and rely on libbpf
+    support to detach programs and free up resources.
+
+    Another facility provided by BPF skeleton is an interface to global
+    variables of all supported kinds: mutable, read-only, as well as extern
+    ones. This interface allows to pre-setup initial values of variables before
+    BPF object is loaded and verified by kernel. For non-read-only variables,
+    the same interface can be used to fetch values of global variables on
+    userspace side, even if they are modified by BPF code.
+
+    During skeleton generation, contents of source BPF object *FILE* is
+    embedded within generated code and is thus not necessary to keep around.
+    This ensures skeleton and BPF object file are matching 1-to-1 and always
+    stay in sync. Generated code is dual-licensed under LGPL-2.1 and
+    BSD-2-Clause licenses.
+
+    It is a design goal and guarantee that skeleton interfaces are
+    interoperable with generic libbpf APIs. User should always be able to use
+    skeleton API to create and load BPF object, and later use libbpf APIs to
+    keep working with specific maps, programs, etc.
+
+    As part of skeleton, few custom functions are generated. Each of them is
+    prefixed with object name. Object name can either be derived from object
+    file name, i.e., if BPF object file name is **example.o**, BPF object name
+    will be **example**. Object name can be also specified explicitly through
+    **name** *OBJECT_NAME* parameter. The following custom functions are
+    provided (assuming **example** as the object name):
+
+    - **example__open** and **example__open_opts**.
+      These functions are used to instantiate skeleton. It corresponds to
+      libbpf's **bpf_object__open**\ () API. **_opts** variants accepts extra
+      **bpf_object_open_opts** options.
+
+    - **example__load**.
+      This function creates maps, loads and verifies BPF programs, initializes
+      global data maps. It corresponds to libppf's **bpf_object__load**\ ()
+      API.
+
+    - **example__open_and_load** combines **example__open** and
+      **example__load** invocations in one commonly used operation.
+
+    - **example__attach** and **example__detach**.
+      This pair of functions allow to attach and detach, correspondingly,
+      already loaded BPF object. Only BPF programs of types supported by libbpf
+      for auto-attachment will be auto-attached and their corresponding BPF
+      links instantiated. For other BPF programs, user can manually create a
+      BPF link and assign it to corresponding fields in skeleton struct.
+      **example__detach** will detach both links created automatically, as well
+      as those populated by user manually.
+
+    - **example__destroy**.
+      Detach and unload BPF programs, free up all the resources used by
+      skeleton and BPF object.
+
+    If BPF object has global variables, corresponding structs with memory
+    layout corresponding to global data data section layout will be created.
+    Currently supported ones are: *.data*, *.bss*, *.rodata*, and *.kconfig*
+    structs/data sections. These data sections/structs can be used to set up
+    initial values of variables, if set before **example__load**. Afterwards,
+    if target kernel supports memory-mapped BPF arrays, same structs can be
+    used to fetch and update (non-read-only) data from userspace, with same
+    simplicity as for BPF side.
+
+bpftool gen subskeleton *FILE*
+    Generate BPF subskeleton C header file for a given *FILE*.
+
+    Subskeletons are similar to skeletons, except they do not own the
+    corresponding maps, programs, or global variables. They require that the
+    object file used to generate them is already loaded into a *bpf_object* by
+    some other means.
+
+    This functionality is useful when a library is included into a larger BPF
+    program. A subskeleton for the library would have access to all objects and
+    globals defined in it, without having to know about the larger program.
+
+    Consequently, there are only two functions defined for subskeletons:
+
+    - **example__open(bpf_object\*)**.
+      Instantiates a subskeleton from an already opened (but not necessarily
+      loaded) **bpf_object**.
+
+    - **example__destroy()**.
+      Frees the storage for the subskeleton but *does not* unload any BPF
+      programs or maps.
+
+bpftool gen min_core_btf *INPUT* *OUTPUT* *OBJECT* [*OBJECT*...]
+    Generate a minimum BTF file as *OUTPUT*, derived from a given *INPUT* BTF
+    file, containing all needed BTF types so one, or more, given eBPF objects
+    CO-RE relocations may be satisfied.
+
+    When kernels aren't compiled with CONFIG_DEBUG_INFO_BTF, libbpf, when
+    loading an eBPF object, has to rely on external BTF files to be able to
+    calculate CO-RE relocations.
+
+    Usually, an external BTF file is built from existing kernel DWARF data
+    using pahole. It contains all the types used by its respective kernel image
+    and, because of that, is big.
+
+    The min_core_btf feature builds smaller BTF files, customized to one or
+    multiple eBPF objects, so they can be distributed together with an eBPF
+    CO-RE based application, turning the application portable to different
+    kernel versions.
+
+    Check examples bellow for more information how to use it.
+
+bpftool gen help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
-	-L, --use-loader
-		  For skeletons, generate a "light" skeleton (also known as "loader"
-		  skeleton). A light skeleton contains a loader eBPF program. It does
-		  not use the majority of the libbpf infrastructure, and does not need
-		  libelf.
+-L, --use-loader
+    For skeletons, generate a "light" skeleton (also known as "loader"
+    skeleton). A light skeleton contains a loader eBPF program. It does not use
+    the majority of the libbpf infrastructure, and does not need libelf.
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-iter.rst b/tools/bpf/bpftool/Documentation/bpftool-iter.rst
index 84839d488621..2e5d81c906dc 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-iter.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-iter.rst
@@ -14,50 +14,46 @@ tool to create BPF iterators
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **iter** *COMMAND*
+**bpftool** [*OPTIONS*] **iter** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| }
+*OPTIONS* := { |COMMON_OPTIONS| }
 
-	*COMMANDS* := { **pin** | **help** }
+*COMMANDS* := { **pin** | **help** }
 
 ITER COMMANDS
-===================
+=============
 
-|	**bpftool** **iter pin** *OBJ* *PATH* [**map** *MAP*]
-|	**bpftool** **iter help**
+| **bpftool** **iter pin** *OBJ* *PATH* [**map** *MAP*]
+| **bpftool** **iter help**
 |
-|	*OBJ* := /a/file/of/bpf_iter_target.o
-|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
+| *OBJ* := /a/file/of/bpf_iter_target.o
+| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
 
 DESCRIPTION
 ===========
-	**bpftool iter pin** *OBJ* *PATH* [**map** *MAP*]
-		  A bpf iterator combines a kernel iterating of
-		  particular kernel data (e.g., tasks, bpf_maps, etc.)
-		  and a bpf program called for each kernel data object
-		  (e.g., one task, one bpf_map, etc.). User space can
-		  *read* kernel iterator output through *read()* syscall.
-
-		  The *pin* command creates a bpf iterator from *OBJ*,
-		  and pin it to *PATH*. The *PATH* should be located
-		  in *bpffs* mount. It must not contain a dot
-		  character ('.'), which is reserved for future extensions
-		  of *bpffs*.
-
-		  Map element bpf iterator requires an additional parameter
-		  *MAP* so bpf program can iterate over map elements for
-		  that map. User can have a bpf program in kernel to run
-		  with each map element, do checking, filtering, aggregation,
-		  etc. without copying data to user space.
-
-		  User can then *cat PATH* to see the bpf iterator output.
-
-	**bpftool iter help**
-		  Print short help message.
+bpftool iter pin *OBJ* *PATH* [map *MAP*]
+    A bpf iterator combines a kernel iterating of particular kernel data (e.g.,
+    tasks, bpf_maps, etc.) and a bpf program called for each kernel data object
+    (e.g., one task, one bpf_map, etc.). User space can *read* kernel iterator
+    output through *read()* syscall.
+
+    The *pin* command creates a bpf iterator from *OBJ*, and pin it to *PATH*.
+    The *PATH* should be located in *bpffs* mount. It must not contain a dot
+    character ('.'), which is reserved for future extensions of *bpffs*.
+
+    Map element bpf iterator requires an additional parameter *MAP* so bpf
+    program can iterate over map elements for that map. User can have a bpf
+    program in kernel to run with each map element, do checking, filtering,
+    aggregation, etc. without copying data to user space.
+
+    User can then *cat PATH* to see the bpf iterator output.
+
+bpftool iter help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-link.rst b/tools/bpf/bpftool/Documentation/bpftool-link.rst
index 52a4eee4af54..6f09d4405ed8 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-link.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-link.rst
@@ -14,67 +14,62 @@ tool for inspection and simple manipulation of eBPF links
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **link** *COMMAND*
+**bpftool** [*OPTIONS*] **link** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
+*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
 
-	*COMMANDS* := { **show** | **list** | **pin** | **help** }
+*COMMANDS* := { **show** | **list** | **pin** | **help** }
 
 LINK COMMANDS
 =============
 
-|	**bpftool** **link { show | list }** [*LINK*]
-|	**bpftool** **link pin** *LINK* *FILE*
-|	**bpftool** **link detach** *LINK*
-|	**bpftool** **link help**
+| **bpftool** **link { show | list }** [*LINK*]
+| **bpftool** **link pin** *LINK* *FILE*
+| **bpftool** **link detach** *LINK*
+| **bpftool** **link help**
 |
-|	*LINK* := { **id** *LINK_ID* | **pinned** *FILE* }
+| *LINK* := { **id** *LINK_ID* | **pinned** *FILE* }
 
 
 DESCRIPTION
 ===========
-	**bpftool link { show | list }** [*LINK*]
-		  Show information about active links. If *LINK* is
-		  specified show information only about given link,
-		  otherwise list all links currently active on the system.
+bpftool link { show | list } [*LINK*]
+    Show information about active links. If *LINK* is specified show
+    information only about given link, otherwise list all links currently
+    active on the system.
 
-		  Output will start with link ID followed by link type and
-		  zero or more named attributes, some of which depend on type
-		  of link.
+    Output will start with link ID followed by link type and zero or more named
+    attributes, some of which depend on type of link.
 
-		  Since Linux 5.8 bpftool is able to discover information about
-		  processes that hold open file descriptors (FDs) against BPF
-		  links. On such kernels bpftool will automatically emit this
-		  information as well.
+    Since Linux 5.8 bpftool is able to discover information about processes
+    that hold open file descriptors (FDs) against BPF links. On such kernels
+    bpftool will automatically emit this information as well.
 
-	**bpftool link pin** *LINK* *FILE*
-		  Pin link *LINK* as *FILE*.
+bpftool link pin *LINK* *FILE*
+    Pin link *LINK* as *FILE*.
 
-		  Note: *FILE* must be located in *bpffs* mount. It must not
-		  contain a dot character ('.'), which is reserved for future
-		  extensions of *bpffs*.
+    Note: *FILE* must be located in *bpffs* mount. It must not contain a dot
+    character ('.'), which is reserved for future extensions of *bpffs*.
 
-	**bpftool link detach** *LINK*
-		  Force-detach link *LINK*. BPF link and its underlying BPF
-		  program will stay valid, but they will be detached from the
-		  respective BPF hook and BPF link will transition into
-		  a defunct state until last open file descriptor for that
-		  link is closed.
+bpftool link detach *LINK*
+    Force-detach link *LINK*. BPF link and its underlying BPF program will stay
+    valid, but they will be detached from the respective BPF hook and BPF link
+    will transition into a defunct state until last open file descriptor for
+    that link is closed.
 
-	**bpftool link help**
-		  Print short help message.
+bpftool link help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+    .. include:: common_options.rst
 
-	-f, --bpffs
-		  When showing BPF links, show file names of pinned
-		  links.
+    -f, --bpffs
+        When showing BPF links, show file names of pinned links.
 
-	-n, --nomount
-		  Do not automatically attempt to mount any virtual file system
-		  (such as tracefs or BPF virtual file system) when necessary.
+    -n, --nomount
+        Do not automatically attempt to mount any virtual file system (such as
+        tracefs or BPF virtual file system) when necessary.
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst
index 9d6a314dfd7a..252e4c538edb 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-map.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -14,166 +14,160 @@ tool for inspection and simple manipulation of eBPF maps
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **map** *COMMAND*
+**bpftool** [*OPTIONS*] **map** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
+*OPTIONS* := { |COMMON_OPTIONS| | { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
 
-	*COMMANDS* :=
-	{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** |
-	**delete** | **pin** | **help** }
+*COMMANDS* :=
+{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** |
+**delete** | **pin** | **help** }
 
 MAP COMMANDS
 =============
 
-|	**bpftool** **map** { **show** | **list** }   [*MAP*]
-|	**bpftool** **map create**     *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE* \
-|		**entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**inner_map** *MAP*] \
-|		[**offload_dev** *NAME*]
-|	**bpftool** **map dump**       *MAP*
-|	**bpftool** **map update**     *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*]
-|	**bpftool** **map lookup**     *MAP* [**key** *DATA*]
-|	**bpftool** **map getnext**    *MAP* [**key** *DATA*]
-|	**bpftool** **map delete**     *MAP*  **key** *DATA*
-|	**bpftool** **map pin**        *MAP*  *FILE*
-|	**bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*]
-|	**bpftool** **map peek**       *MAP*
-|	**bpftool** **map push**       *MAP* **value** *VALUE*
-|	**bpftool** **map pop**        *MAP*
-|	**bpftool** **map enqueue**    *MAP* **value** *VALUE*
-|	**bpftool** **map dequeue**    *MAP*
-|	**bpftool** **map freeze**     *MAP*
-|	**bpftool** **map help**
+| **bpftool** **map** { **show** | **list** }   [*MAP*]
+| **bpftool** **map create**     *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE* \
+|     **entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**inner_map** *MAP*] \
+|     [**offload_dev** *NAME*]
+| **bpftool** **map dump**       *MAP*
+| **bpftool** **map update**     *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*]
+| **bpftool** **map lookup**     *MAP* [**key** *DATA*]
+| **bpftool** **map getnext**    *MAP* [**key** *DATA*]
+| **bpftool** **map delete**     *MAP*  **key** *DATA*
+| **bpftool** **map pin**        *MAP*  *FILE*
+| **bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*]
+| **bpftool** **map peek**       *MAP*
+| **bpftool** **map push**       *MAP* **value** *VALUE*
+| **bpftool** **map pop**        *MAP*
+| **bpftool** **map enqueue**    *MAP* **value** *VALUE*
+| **bpftool** **map dequeue**    *MAP*
+| **bpftool** **map freeze**     *MAP*
+| **bpftool** **map help**
 |
-|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* }
-|	*DATA* := { [**hex**] *BYTES* }
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
-|	*VALUE* := { *DATA* | *MAP* | *PROG* }
-|	*UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
-|	*TYPE* := { **hash** | **array** | **prog_array** | **perf_event_array** | **percpu_hash**
-|		| **percpu_array** | **stack_trace** | **cgroup_array** | **lru_hash**
-|		| **lru_percpu_hash** | **lpm_trie** | **array_of_maps** | **hash_of_maps**
-|		| **devmap** | **devmap_hash** | **sockmap** | **cpumap** | **xskmap** | **sockhash**
-|		| **cgroup_storage** | **reuseport_sockarray** | **percpu_cgroup_storage**
-|		| **queue** | **stack** | **sk_storage** | **struct_ops** | **ringbuf** | **inode_storage**
-|		| **task_storage** | **bloom_filter** | **user_ringbuf** | **cgrp_storage** | **arena** }
+| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* }
+| *DATA* := { [**hex**] *BYTES* }
+| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
+| *VALUE* := { *DATA* | *MAP* | *PROG* }
+| *UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
+| *TYPE* := { **hash** | **array** | **prog_array** | **perf_event_array** | **percpu_hash**
+|     | **percpu_array** | **stack_trace** | **cgroup_array** | **lru_hash**
+|     | **lru_percpu_hash** | **lpm_trie** | **array_of_maps** | **hash_of_maps**
+|     | **devmap** | **devmap_hash** | **sockmap** | **cpumap** | **xskmap** | **sockhash**
+|     | **cgroup_storage** | **reuseport_sockarray** | **percpu_cgroup_storage**
+|     | **queue** | **stack** | **sk_storage** | **struct_ops** | **ringbuf** | **inode_storage**
+|     | **task_storage** | **bloom_filter** | **user_ringbuf** | **cgrp_storage** | **arena** }
 
 DESCRIPTION
 ===========
-	**bpftool map { show | list }**   [*MAP*]
-		  Show information about loaded maps.  If *MAP* is specified
-		  show information only about given maps, otherwise list all
-		  maps currently loaded on the system.  In case of **name**,
-		  *MAP* may match several maps which will all be shown.
+bpftool map { show | list }   [*MAP*]
+    Show information about loaded maps.  If *MAP* is specified show information
+    only about given maps, otherwise list all maps currently loaded on the
+    system.  In case of **name**, *MAP* may match several maps which will all
+    be shown.
 
-		  Output will start with map ID followed by map type and
-		  zero or more named attributes (depending on kernel version).
+    Output will start with map ID followed by map type and zero or more named
+    attributes (depending on kernel version).
 
-		  Since Linux 5.8 bpftool is able to discover information about
-		  processes that hold open file descriptors (FDs) against BPF
-		  maps. On such kernels bpftool will automatically emit this
-		  information as well.
+    Since Linux 5.8 bpftool is able to discover information about processes
+    that hold open file descriptors (FDs) against BPF maps. On such kernels
+    bpftool will automatically emit this information as well.
 
-	**bpftool map create** *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE*  **entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**inner_map** *MAP*] [**offload_dev** *NAME*]
-		  Create a new map with given parameters and pin it to *bpffs*
-		  as *FILE*.
+bpftool map create *FILE* type *TYPE* key *KEY_SIZE* value *VALUE_SIZE*  entries *MAX_ENTRIES* name *NAME* [flags *FLAGS*] [inner_map *MAP*] [offload_dev *NAME*]
+    Create a new map with given parameters and pin it to *bpffs* as *FILE*.
 
-		  *FLAGS* should be an integer which is the combination of
-		  desired flags, e.g. 1024 for **BPF_F_MMAPABLE** (see bpf.h
-		  UAPI header for existing flags).
+    *FLAGS* should be an integer which is the combination of desired flags,
+    e.g. 1024 for **BPF_F_MMAPABLE** (see bpf.h UAPI header for existing
+    flags).
 
-		  To create maps of type array-of-maps or hash-of-maps, the
-		  **inner_map** keyword must be used to pass an inner map. The
-		  kernel needs it to collect metadata related to the inner maps
-		  that the new map will work with.
+    To create maps of type array-of-maps or hash-of-maps, the **inner_map**
+    keyword must be used to pass an inner map. The kernel needs it to collect
+    metadata related to the inner maps that the new map will work with.
 
-		  Keyword **offload_dev** expects a network interface name,
-		  and is used to request hardware offload for the map.
+    Keyword **offload_dev** expects a network interface name, and is used to
+    request hardware offload for the map.
 
-	**bpftool map dump**    *MAP*
-		  Dump all entries in a given *MAP*.  In case of **name**,
-		  *MAP* may match several maps which will all be dumped.
+bpftool map dump    *MAP*
+    Dump all entries in a given *MAP*.  In case of **name**, *MAP* may match
+    several maps which will all be dumped.
 
-	**bpftool map update**  *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*]
-		  Update map entry for a given *KEY*.
+bpftool map update  *MAP* [key *DATA*] [value *VALUE*] [*UPDATE_FLAGS*]
+    Update map entry for a given *KEY*.
 
-		  *UPDATE_FLAGS* can be one of: **any** update existing entry
-		  or add if doesn't exit; **exist** update only if entry already
-		  exists; **noexist** update only if entry doesn't exist.
+    *UPDATE_FLAGS* can be one of: **any** update existing entry or add if
+    doesn't exit; **exist** update only if entry already exists; **noexist**
+    update only if entry doesn't exist.
 
-		  If the **hex** keyword is provided in front of the bytes
-		  sequence, the bytes are parsed as hexadecimal values, even if
-		  no "0x" prefix is added. If the keyword is not provided, then
-		  the bytes are parsed as decimal values, unless a "0x" prefix
-		  (for hexadecimal) or a "0" prefix (for octal) is provided.
+    If the **hex** keyword is provided in front of the bytes sequence, the
+    bytes are parsed as hexadecimal values, even if no "0x" prefix is added. If
+    the keyword is not provided, then the bytes are parsed as decimal values,
+    unless a "0x" prefix (for hexadecimal) or a "0" prefix (for octal) is
+    provided.
 
-	**bpftool map lookup**  *MAP* [**key** *DATA*]
-		  Lookup **key** in the map.
+bpftool map lookup  *MAP* [key *DATA*]
+    Lookup **key** in the map.
 
-	**bpftool map getnext** *MAP* [**key** *DATA*]
-		  Get next key.  If *key* is not specified, get first key.
+bpftool map getnext *MAP* [key *DATA*]
+    Get next key.  If *key* is not specified, get first key.
 
-	**bpftool map delete**  *MAP*  **key** *DATA*
-		  Remove entry from the map.
+bpftool map delete  *MAP*  key *DATA*
+    Remove entry from the map.
 
-	**bpftool map pin**     *MAP*  *FILE*
-		  Pin map *MAP* as *FILE*.
+bpftool map pin     *MAP*  *FILE*
+    Pin map *MAP* as *FILE*.
 
-		  Note: *FILE* must be located in *bpffs* mount. It must not
-		  contain a dot character ('.'), which is reserved for future
-		  extensions of *bpffs*.
+    Note: *FILE* must be located in *bpffs* mount. It must not contain a dot
+    character ('.'), which is reserved for future extensions of *bpffs*.
 
-	**bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*]
-		  Read events from a **BPF_MAP_TYPE_PERF_EVENT_ARRAY** map.
+bpftool map event_pipe *MAP* [cpu *N* index *M*]
+    Read events from a **BPF_MAP_TYPE_PERF_EVENT_ARRAY** map.
 
-		  Install perf rings into a perf event array map and dump
-		  output of any **bpf_perf_event_output**\ () call in the kernel.
-		  By default read the number of CPUs on the system and
-		  install perf ring for each CPU in the corresponding index
-		  in the array.
+    Install perf rings into a perf event array map and dump output of any
+    **bpf_perf_event_output**\ () call in the kernel. By default read the
+    number of CPUs on the system and install perf ring for each CPU in the
+    corresponding index in the array.
 
-		  If **cpu** and **index** are specified, install perf ring
-		  for given **cpu** at **index** in the array (single ring).
+    If **cpu** and **index** are specified, install perf ring for given **cpu**
+    at **index** in the array (single ring).
 
-		  Note that installing a perf ring into an array will silently
-		  replace any existing ring.  Any other application will stop
-		  receiving events if it installed its rings earlier.
+    Note that installing a perf ring into an array will silently replace any
+    existing ring.  Any other application will stop receiving events if it
+    installed its rings earlier.
 
-	**bpftool map peek**  *MAP*
-		  Peek next value in the queue or stack.
+bpftool map peek  *MAP*
+    Peek next value in the queue or stack.
 
-	**bpftool map push**  *MAP* **value** *VALUE*
-		  Push *VALUE* onto the stack.
+bpftool map push  *MAP* value *VALUE*
+    Push *VALUE* onto the stack.
 
-	**bpftool map pop**  *MAP*
-		  Pop and print value from the stack.
+bpftool map pop  *MAP*
+    Pop and print value from the stack.
 
-	**bpftool map enqueue**  *MAP* **value** *VALUE*
-		  Enqueue *VALUE* into the queue.
+bpftool map enqueue  *MAP* value *VALUE*
+    Enqueue *VALUE* into the queue.
 
-	**bpftool map dequeue**  *MAP*
-		  Dequeue and print value from the queue.
+bpftool map dequeue  *MAP*
+    Dequeue and print value from the queue.
 
-	**bpftool map freeze**  *MAP*
-		  Freeze the map as read-only from user space. Entries from a
-		  frozen map can not longer be updated or deleted with the
-		  **bpf**\ () system call. This operation is not reversible,
-		  and the map remains immutable from user space until its
-		  destruction. However, read and write permissions for BPF
-		  programs to the map remain unchanged.
+bpftool map freeze  *MAP*
+    Freeze the map as read-only from user space. Entries from a frozen map can
+    not longer be updated or deleted with the **bpf**\ () system call. This
+    operation is not reversible, and the map remains immutable from user space
+    until its destruction. However, read and write permissions for BPF programs
+    to the map remain unchanged.
 
-	**bpftool map help**
-		  Print short help message.
+bpftool map help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
-	-f, --bpffs
-		  Show file names of pinned maps.
+-f, --bpffs
+    Show file names of pinned maps.
 
-	-n, --nomount
-		  Do not automatically attempt to mount any virtual file system
-		  (such as tracefs or BPF virtual file system) when necessary.
+-n, --nomount
+    Do not automatically attempt to mount any virtual file system (such as
+    tracefs or BPF virtual file system) when necessary.
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-net.rst b/tools/bpf/bpftool/Documentation/bpftool-net.rst
index dd3f9469765b..348812881297 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-net.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-net.rst
@@ -14,76 +14,74 @@ tool for inspection of networking related bpf prog attachments
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **net** *COMMAND*
+**bpftool** [*OPTIONS*] **net** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| }
+*OPTIONS* := { |COMMON_OPTIONS| }
 
-	*COMMANDS* :=
-	{ **show** | **list** | **attach** | **detach** | **help** }
+*COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** }
 
 NET COMMANDS
 ============
 
-|	**bpftool** **net** { **show** | **list** } [ **dev** *NAME* ]
-|	**bpftool** **net attach** *ATTACH_TYPE* *PROG* **dev** *NAME* [ **overwrite** ]
-|	**bpftool** **net detach** *ATTACH_TYPE* **dev** *NAME*
-|	**bpftool** **net help**
+| **bpftool** **net** { **show** | **list** } [ **dev** *NAME* ]
+| **bpftool** **net attach** *ATTACH_TYPE* *PROG* **dev** *NAME* [ **overwrite** ]
+| **bpftool** **net detach** *ATTACH_TYPE* **dev** *NAME*
+| **bpftool** **net help**
 |
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
-|	*ATTACH_TYPE* := { **xdp** | **xdpgeneric** | **xdpdrv** | **xdpoffload** }
+| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
+| *ATTACH_TYPE* := { **xdp** | **xdpgeneric** | **xdpdrv** | **xdpoffload** }
 
 DESCRIPTION
 ===========
-	**bpftool net { show | list }** [ **dev** *NAME* ]
-		  List bpf program attachments in the kernel networking subsystem.
-
-		  Currently, device driver xdp attachments, tcx, netkit and old-style tc
-		  classifier/action attachments, flow_dissector as well as netfilter
-		  attachments are implemented, i.e., for
-		  program types **BPF_PROG_TYPE_XDP**, **BPF_PROG_TYPE_SCHED_CLS**,
-		  **BPF_PROG_TYPE_SCHED_ACT**, **BPF_PROG_TYPE_FLOW_DISSECTOR**,
-		  **BPF_PROG_TYPE_NETFILTER**.
-
-		  For programs attached to a particular cgroup, e.g.,
-		  **BPF_PROG_TYPE_CGROUP_SKB**, **BPF_PROG_TYPE_CGROUP_SOCK**,
-		  **BPF_PROG_TYPE_SOCK_OPS** and **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
-		  users can use **bpftool cgroup** to dump cgroup attachments.
-		  For sk_{filter, skb, msg, reuseport} and lwt/seg6
-		  bpf programs, users should consult other tools, e.g., iproute2.
-
-		  The current output will start with all xdp program attachments, followed by
-		  all tcx, netkit, then tc class/qdisc bpf program attachments, then flow_dissector
-		  and finally netfilter programs. Both xdp programs and tcx/netkit/tc programs are
-		  ordered based on ifindex number. If multiple bpf programs attached
-		  to the same networking device through **tc**, the order will be first
-		  all bpf programs attached to tcx, netkit, then tc classes, then all bpf programs
-		  attached to non clsact qdiscs, and finally all bpf programs attached
-		  to root and clsact qdisc.
-
-	**bpftool** **net attach** *ATTACH_TYPE* *PROG* **dev** *NAME* [ **overwrite** ]
-		  Attach bpf program *PROG* to network interface *NAME* with
-		  type specified by *ATTACH_TYPE*. Previously attached bpf program
-		  can be replaced by the command used with **overwrite** option.
-		  Currently, only XDP-related modes are supported for *ATTACH_TYPE*.
-
-		  *ATTACH_TYPE* can be of:
-		  **xdp** - try native XDP and fallback to generic XDP if NIC driver does not support it;
-		  **xdpgeneric** - Generic XDP. runs at generic XDP hook when packet already enters receive path as skb;
-		  **xdpdrv** - Native XDP. runs earliest point in driver's receive path;
-		  **xdpoffload** - Offload XDP. runs directly on NIC on each packet reception;
-
-	**bpftool** **net detach** *ATTACH_TYPE* **dev** *NAME*
-		  Detach bpf program attached to network interface *NAME* with
-		  type specified by *ATTACH_TYPE*. To detach bpf program, same
-		  *ATTACH_TYPE* previously used for attach must be specified.
-		  Currently, only XDP-related modes are supported for *ATTACH_TYPE*.
-
-	**bpftool net help**
-		  Print short help message.
+bpftool net { show | list } [ dev *NAME* ]
+    List bpf program attachments in the kernel networking subsystem.
+
+    Currently, device driver xdp attachments, tcx, netkit and old-style tc
+    classifier/action attachments, flow_dissector as well as netfilter
+    attachments are implemented, i.e., for program types **BPF_PROG_TYPE_XDP**,
+    **BPF_PROG_TYPE_SCHED_CLS**, **BPF_PROG_TYPE_SCHED_ACT**,
+    **BPF_PROG_TYPE_FLOW_DISSECTOR**, **BPF_PROG_TYPE_NETFILTER**.
+
+    For programs attached to a particular cgroup, e.g.,
+    **BPF_PROG_TYPE_CGROUP_SKB**, **BPF_PROG_TYPE_CGROUP_SOCK**,
+    **BPF_PROG_TYPE_SOCK_OPS** and **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, users
+    can use **bpftool cgroup** to dump cgroup attachments. For sk_{filter, skb,
+    msg, reuseport} and lwt/seg6 bpf programs, users should consult other
+    tools, e.g., iproute2.
+
+    The current output will start with all xdp program attachments, followed by
+    all tcx, netkit, then tc class/qdisc bpf program attachments, then
+    flow_dissector and finally netfilter programs. Both xdp programs and
+    tcx/netkit/tc programs are ordered based on ifindex number. If multiple bpf
+    programs attached to the same networking device through **tc**, the order
+    will be first all bpf programs attached to tcx, netkit, then tc classes,
+    then all bpf programs attached to non clsact qdiscs, and finally all bpf
+    programs attached to root and clsact qdisc.
+
+bpftool net attach *ATTACH_TYPE* *PROG* dev *NAME* [ overwrite ]
+    Attach bpf program *PROG* to network interface *NAME* with type specified
+    by *ATTACH_TYPE*. Previously attached bpf program can be replaced by the
+    command used with **overwrite** option. Currently, only XDP-related modes
+    are supported for *ATTACH_TYPE*.
+
+    *ATTACH_TYPE* can be of:
+    **xdp** - try native XDP and fallback to generic XDP if NIC driver does not support it;
+    **xdpgeneric** - Generic XDP. runs at generic XDP hook when packet already enters receive path as skb;
+    **xdpdrv** - Native XDP. runs earliest point in driver's receive path;
+    **xdpoffload** - Offload XDP. runs directly on NIC on each packet reception;
+
+bpftool net detach *ATTACH_TYPE* dev *NAME*
+    Detach bpf program attached to network interface *NAME* with type specified
+    by *ATTACH_TYPE*. To detach bpf program, same *ATTACH_TYPE* previously used
+    for attach must be specified. Currently, only XDP-related modes are
+    supported for *ATTACH_TYPE*.
+
+bpftool net help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-perf.rst b/tools/bpf/bpftool/Documentation/bpftool-perf.rst
index 5fea633a82f1..8c1ae55be596 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-perf.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-perf.rst
@@ -14,37 +14,37 @@ tool for inspection of perf related bpf prog attachments
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **perf** *COMMAND*
+**bpftool** [*OPTIONS*] **perf** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| }
+*OPTIONS* := { |COMMON_OPTIONS| }
 
-	*COMMANDS* :=
-	{ **show** | **list** | **help** }
+*COMMANDS* :=
+{ **show** | **list** | **help** }
 
 PERF COMMANDS
 =============
 
-|	**bpftool** **perf** { **show** | **list** }
-|	**bpftool** **perf help**
+| **bpftool** **perf** { **show** | **list** }
+| **bpftool** **perf help**
 
 DESCRIPTION
 ===========
-	**bpftool perf { show | list }**
-		  List all raw_tracepoint, tracepoint, kprobe attachment in the system.
+bpftool perf { show | list }
+    List all raw_tracepoint, tracepoint, kprobe attachment in the system.
 
-		  Output will start with process id and file descriptor in that process,
-		  followed by bpf program id, attachment information, and attachment point.
-		  The attachment point for raw_tracepoint/tracepoint is the trace probe name.
-		  The attachment point for k[ret]probe is either symbol name and offset,
-		  or a kernel virtual address.
-		  The attachment point for u[ret]probe is the file name and the file offset.
+    Output will start with process id and file descriptor in that process,
+    followed by bpf program id, attachment information, and attachment point.
+    The attachment point for raw_tracepoint/tracepoint is the trace probe name.
+    The attachment point for k[ret]probe is either symbol name and offset, or a
+    kernel virtual address. The attachment point for u[ret]probe is the file
+    name and the file offset.
 
-	**bpftool perf help**
-		  Print short help message.
+bpftool perf help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
index 58e6a5b10ef7..d6304e01afe0 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
@@ -14,250 +14,226 @@ tool for inspection and simple manipulation of eBPF progs
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **prog** *COMMAND*
+**bpftool** [*OPTIONS*] **prog** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| |
-	{ **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } |
-	{ **-L** | **--use-loader** } }
+*OPTIONS* := { |COMMON_OPTIONS| |
+{ **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } |
+{ **-L** | **--use-loader** } }
 
-	*COMMANDS* :=
-	{ **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** |
-	**loadall** | **help** }
+*COMMANDS* :=
+{ **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** |
+**loadall** | **help** }
 
 PROG COMMANDS
 =============
 
-|	**bpftool** **prog** { **show** | **list** } [*PROG*]
-|	**bpftool** **prog dump xlated** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] [**visual**] }]
-|	**bpftool** **prog dump jited**  *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] }]
-|	**bpftool** **prog pin** *PROG* *FILE*
-|	**bpftool** **prog** { **load** | **loadall** } *OBJ* *PATH* [**type** *TYPE*] [**map** { **idx** *IDX* | **name** *NAME* } *MAP*] [{ **offload_dev** | **xdpmeta_dev** } *NAME*] [**pinmaps** *MAP_DIR*] [**autoattach**]
-|	**bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*]
-|	**bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*]
-|	**bpftool** **prog tracelog**
-|	**bpftool** **prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*]
-|	**bpftool** **prog profile** *PROG* [**duration** *DURATION*] *METRICs*
-|	**bpftool** **prog help**
+| **bpftool** **prog** { **show** | **list** } [*PROG*]
+| **bpftool** **prog dump xlated** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] [**visual**] }]
+| **bpftool** **prog dump jited**  *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] }]
+| **bpftool** **prog pin** *PROG* *FILE*
+| **bpftool** **prog** { **load** | **loadall** } *OBJ* *PATH* [**type** *TYPE*] [**map** { **idx** *IDX* | **name** *NAME* } *MAP*] [{ **offload_dev** | **xdpmeta_dev** } *NAME*] [**pinmaps** *MAP_DIR*] [**autoattach**]
+| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*]
+| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*]
+| **bpftool** **prog tracelog**
+| **bpftool** **prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*]
+| **bpftool** **prog profile** *PROG* [**duration** *DURATION*] *METRICs*
+| **bpftool** **prog help**
 |
-|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
-|	*TYPE* := {
-|		**socket** | **kprobe** | **kretprobe** | **classifier** | **action** |
-|		**tracepoint** | **raw_tracepoint** | **xdp** | **perf_event** | **cgroup/skb** |
-|		**cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** |
-|		**lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** |
-|		**cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** |
-|		**cgroup/connect4** | **cgroup/connect6** | **cgroup/connect_unix** |
-|		**cgroup/getpeername4** | **cgroup/getpeername6** | **cgroup/getpeername_unix** |
-|		**cgroup/getsockname4** | **cgroup/getsockname6** | **cgroup/getsockname_unix** |
-|		**cgroup/sendmsg4** | **cgroup/sendmsg6** | **cgroup/sendmsg_unix** |
-|		**cgroup/recvmsg4** | **cgroup/recvmsg6** | **cgroup/recvmsg_unix** | **cgroup/sysctl** |
-|		**cgroup/getsockopt** | **cgroup/setsockopt** | **cgroup/sock_release** |
-|		**struct_ops** | **fentry** | **fexit** | **freplace** | **sk_lookup**
-|	}
-|	*ATTACH_TYPE* := {
-|		**sk_msg_verdict** | **sk_skb_verdict** | **sk_skb_stream_verdict** |
-|		**sk_skb_stream_parser** | **flow_dissector**
-|	}
-|	*METRICs* := {
-|		**cycles** | **instructions** | **l1d_loads** | **llc_misses** |
-|		**itlb_misses** | **dtlb_misses**
-|	}
+| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* }
+| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
+| *TYPE* := {
+|     **socket** | **kprobe** | **kretprobe** | **classifier** | **action** |
+|     **tracepoint** | **raw_tracepoint** | **xdp** | **perf_event** | **cgroup/skb** |
+|     **cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** |
+|     **lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** |
+|     **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** |
+|     **cgroup/connect4** | **cgroup/connect6** | **cgroup/connect_unix** |
+|     **cgroup/getpeername4** | **cgroup/getpeername6** | **cgroup/getpeername_unix** |
+|     **cgroup/getsockname4** | **cgroup/getsockname6** | **cgroup/getsockname_unix** |
+|     **cgroup/sendmsg4** | **cgroup/sendmsg6** | **cgroup/sendmsg_unix** |
+|     **cgroup/recvmsg4** | **cgroup/recvmsg6** | **cgroup/recvmsg_unix** | **cgroup/sysctl** |
+|     **cgroup/getsockopt** | **cgroup/setsockopt** | **cgroup/sock_release** |
+|     **struct_ops** | **fentry** | **fexit** | **freplace** | **sk_lookup**
+| }
+| *ATTACH_TYPE* := {
+|     **sk_msg_verdict** | **sk_skb_verdict** | **sk_skb_stream_verdict** |
+|     **sk_skb_stream_parser** | **flow_dissector**
+| }
+| *METRICs* := {
+|     **cycles** | **instructions** | **l1d_loads** | **llc_misses** |
+|     **itlb_misses** | **dtlb_misses**
+| }
 
 
 DESCRIPTION
 ===========
-	**bpftool prog { show | list }** [*PROG*]
-		  Show information about loaded programs.  If *PROG* is
-		  specified show information only about given programs,
-		  otherwise list all programs currently loaded on the system.
-		  In case of **tag** or **name**, *PROG* may match several
-		  programs which will all be shown.
-
-		  Output will start with program ID followed by program type and
-		  zero or more named attributes (depending on kernel version).
-
-		  Since Linux 5.1 the kernel can collect statistics on BPF
-		  programs (such as the total time spent running the program,
-		  and the number of times it was run). If available, bpftool
-		  shows such statistics. However, the kernel does not collect
-		  them by defaults, as it slightly impacts performance on each
-		  program run. Activation or deactivation of the feature is
-		  performed via the **kernel.bpf_stats_enabled** sysctl knob.
-
-		  Since Linux 5.8 bpftool is able to discover information about
-		  processes that hold open file descriptors (FDs) against BPF
-		  programs. On such kernels bpftool will automatically emit this
-		  information as well.
-
-	**bpftool prog dump xlated** *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] [**visual**] }]
-		  Dump eBPF instructions of the programs from the kernel. By
-		  default, eBPF will be disassembled and printed to standard
-		  output in human-readable format. In this case, **opcodes**
-		  controls if raw opcodes should be printed as well.
-
-		  In case of **tag** or **name**, *PROG* may match several
-		  programs which will all be dumped.  However, if **file** or
-		  **visual** is specified, *PROG* must match a single program.
-
-		  If **file** is specified, the binary image will instead be
-		  written to *FILE*.
-
-		  If **visual** is specified, control flow graph (CFG) will be
-		  built instead, and eBPF instructions will be presented with
-		  CFG in DOT format, on standard output.
-
-		  If the programs have line_info available, the source line will
-		  be displayed.  If **linum** is specified, the filename, line
-		  number and line column will also be displayed.
-
-	**bpftool prog dump jited**  *PROG* [{ **file** *FILE* | [**opcodes**] [**linum**] }]
-		  Dump jited image (host machine code) of the program.
-
-		  If *FILE* is specified image will be written to a file,
-		  otherwise it will be disassembled and printed to stdout.
-		  *PROG* must match a single program when **file** is specified.
-
-		  **opcodes** controls if raw opcodes will be printed.
-
-		  If the prog has line_info available, the source line will
-		  be displayed.  If **linum** is specified, the filename, line
-		  number and line column will also be displayed.
-
-	**bpftool prog pin** *PROG* *FILE*
-		  Pin program *PROG* as *FILE*.
-
-		  Note: *FILE* must be located in *bpffs* mount. It must not
-		  contain a dot character ('.'), which is reserved for future
-		  extensions of *bpffs*.
-
-	**bpftool prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** { **idx** *IDX* | **name** *NAME* } *MAP*] [{ **offload_dev** | **xdpmeta_dev** } *NAME*] [**pinmaps** *MAP_DIR*] [**autoattach**]
-		  Load bpf program(s) from binary *OBJ* and pin as *PATH*.
-		  **bpftool prog load** pins only the first program from the
-		  *OBJ* as *PATH*. **bpftool prog loadall** pins all programs
-		  from the *OBJ* under *PATH* directory.
-		  **type** is optional, if not specified program type will be
-		  inferred from section names.
-		  By default bpftool will create new maps as declared in the ELF
-		  object being loaded.  **map** parameter allows for the reuse
-		  of existing maps.  It can be specified multiple times, each
-		  time for a different map.  *IDX* refers to index of the map
-		  to be replaced in the ELF file counting from 0, while *NAME*
-		  allows to replace a map by name.  *MAP* specifies the map to
-		  use, referring to it by **id** or through a **pinned** file.
-		  If **offload_dev** *NAME* is specified program will be loaded
-		  onto given networking device (offload).
-		  If **xdpmeta_dev** *NAME* is specified program will become
-		  device-bound without offloading, this facilitates access
-		  to XDP metadata.
-		  Optional **pinmaps** argument can be provided to pin all
-		  maps under *MAP_DIR* directory.
-
-		  If **autoattach** is specified program will be attached
-		  before pin. In that case, only the link (representing the
-		  program attached to its hook) is pinned, not the program as
-		  such, so the path won't show in **bpftool prog show -f**,
-		  only show in **bpftool link show -f**. Also, this only works
-		  when bpftool (libbpf) is able to infer all necessary
-		  information from the object file, in particular, it's not
-		  supported for all program types. If a program does not
-		  support autoattach, bpftool falls back to regular pinning
-		  for that program instead.
-
-		  Note: *PATH* must be located in *bpffs* mount. It must not
-		  contain a dot character ('.'), which is reserved for future
-		  extensions of *bpffs*.
-
-	**bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*]
-		  Attach bpf program *PROG* (with type specified by
-		  *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP*
-		  parameter, with the exception of *flow_dissector* which is
-		  attached to current networking name space.
-
-	**bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*]
-		  Detach bpf program *PROG* (with type specified by
-		  *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP*
-		  parameter, with the exception of *flow_dissector* which is
-		  detached from the current networking name space.
-
-	**bpftool prog tracelog**
-		  Dump the trace pipe of the system to the console (stdout).
-		  Hit <Ctrl+C> to stop printing. BPF programs can write to this
-		  trace pipe at runtime with the **bpf_trace_printk**\ () helper.
-		  This should be used only for debugging purposes. For
-		  streaming data from BPF programs to user space, one can use
-		  perf events (see also **bpftool-map**\ (8)).
-
-	**bpftool prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*]
-		  Run BPF program *PROG* in the kernel testing infrastructure
-		  for BPF, meaning that the program works on the data and
-		  context provided by the user, and not on actual packets or
-		  monitored functions etc. Return value and duration for the
-		  test run are printed out to the console.
-
-		  Input data is read from the *FILE* passed with **data_in**.
-		  If this *FILE* is "**-**", input data is read from standard
-		  input. Input context, if any, is read from *FILE* passed with
-		  **ctx_in**. Again, "**-**" can be used to read from standard
-		  input, but only if standard input is not already in use for
-		  input data. If a *FILE* is passed with **data_out**, output
-		  data is written to that file. Similarly, output context is
-		  written to the *FILE* passed with **ctx_out**. For both
-		  output flows, "**-**" can be used to print to the standard
-		  output (as plain text, or JSON if relevant option was
-		  passed). If output keywords are omitted, output data and
-		  context are discarded. Keywords **data_size_out** and
-		  **ctx_size_out** are used to pass the size (in bytes) for the
-		  output buffers to the kernel, although the default of 32 kB
-		  should be more than enough for most cases.
-
-		  Keyword **repeat** is used to indicate the number of
-		  consecutive runs to perform. Note that output data and
-		  context printed to files correspond to the last of those
-		  runs. The duration printed out at the end of the runs is an
-		  average over all runs performed by the command.
-
-		  Not all program types support test run. Among those which do,
-		  not all of them can take the **ctx_in**/**ctx_out**
-		  arguments. bpftool does not perform checks on program types.
-
-	**bpftool prog profile** *PROG* [**duration** *DURATION*] *METRICs*
-		  Profile *METRICs* for bpf program *PROG* for *DURATION*
-		  seconds or until user hits <Ctrl+C>. *DURATION* is optional.
-		  If *DURATION* is not specified, the profiling will run up to
-		  **UINT_MAX** seconds.
-
-	**bpftool prog help**
-		  Print short help message.
+bpftool prog { show | list } [*PROG*]
+    Show information about loaded programs.  If *PROG* is specified show
+    information only about given programs, otherwise list all programs
+    currently loaded on the system. In case of **tag** or **name**, *PROG* may
+    match several programs which will all be shown.
+
+    Output will start with program ID followed by program type and zero or more
+    named attributes (depending on kernel version).
+
+    Since Linux 5.1 the kernel can collect statistics on BPF programs (such as
+    the total time spent running the program, and the number of times it was
+    run). If available, bpftool shows such statistics. However, the kernel does
+    not collect them by defaults, as it slightly impacts performance on each
+    program run. Activation or deactivation of the feature is performed via the
+    **kernel.bpf_stats_enabled** sysctl knob.
+
+    Since Linux 5.8 bpftool is able to discover information about processes
+    that hold open file descriptors (FDs) against BPF programs. On such kernels
+    bpftool will automatically emit this information as well.
+
+bpftool prog dump xlated *PROG* [{ file *FILE* | [opcodes] [linum] [visual] }]
+    Dump eBPF instructions of the programs from the kernel. By default, eBPF
+    will be disassembled and printed to standard output in human-readable
+    format. In this case, **opcodes** controls if raw opcodes should be printed
+    as well.
+
+    In case of **tag** or **name**, *PROG* may match several programs which
+    will all be dumped.  However, if **file** or **visual** is specified,
+    *PROG* must match a single program.
+
+    If **file** is specified, the binary image will instead be written to
+    *FILE*.
+
+    If **visual** is specified, control flow graph (CFG) will be built instead,
+    and eBPF instructions will be presented with CFG in DOT format, on standard
+    output.
+
+    If the programs have line_info available, the source line will be
+    displayed.  If **linum** is specified, the filename, line number and line
+    column will also be displayed.
+
+bpftool prog dump jited  *PROG* [{ file *FILE* | [opcodes] [linum] }]
+    Dump jited image (host machine code) of the program.
+
+    If *FILE* is specified image will be written to a file, otherwise it will
+    be disassembled and printed to stdout. *PROG* must match a single program
+    when **file** is specified.
+
+    **opcodes** controls if raw opcodes will be printed.
+
+    If the prog has line_info available, the source line will be displayed. If
+    **linum** is specified, the filename, line number and line column will also
+    be displayed.
+
+bpftool prog pin *PROG* *FILE*
+    Pin program *PROG* as *FILE*.
+
+    Note: *FILE* must be located in *bpffs* mount. It must not contain a dot
+    character ('.'), which is reserved for future extensions of *bpffs*.
+
+bpftool prog { load | loadall } *OBJ* *PATH* [type *TYPE*] [map { idx *IDX* | name *NAME* } *MAP*] [{ offload_dev | xdpmeta_dev } *NAME*] [pinmaps *MAP_DIR*] [autoattach]
+    Load bpf program(s) from binary *OBJ* and pin as *PATH*. **bpftool prog
+    load** pins only the first program from the *OBJ* as *PATH*. **bpftool prog
+    loadall** pins all programs from the *OBJ* under *PATH* directory. **type**
+    is optional, if not specified program type will be inferred from section
+    names. By default bpftool will create new maps as declared in the ELF
+    object being loaded.  **map** parameter allows for the reuse of existing
+    maps. It can be specified multiple times, each time for a different map.
+    *IDX* refers to index of the map to be replaced in the ELF file counting
+    from 0, while *NAME* allows to replace a map by name. *MAP* specifies the
+    map to use, referring to it by **id** or through a **pinned** file. If
+    **offload_dev** *NAME* is specified program will be loaded onto given
+    networking device (offload). If **xdpmeta_dev** *NAME* is specified program
+    will become device-bound without offloading, this facilitates access to XDP
+    metadata. Optional **pinmaps** argument can be provided to pin all maps
+    under *MAP_DIR* directory.
+
+    If **autoattach** is specified program will be attached before pin. In that
+    case, only the link (representing the program attached to its hook) is
+    pinned, not the program as such, so the path won't show in **bpftool prog
+    show -f**, only show in **bpftool link show -f**. Also, this only works
+    when bpftool (libbpf) is able to infer all necessary information from the
+    object file, in particular, it's not supported for all program types. If a
+    program does not support autoattach, bpftool falls back to regular pinning
+    for that program instead.
+
+    Note: *PATH* must be located in *bpffs* mount. It must not contain a dot
+    character ('.'), which is reserved for future extensions of *bpffs*.
+
+bpftool prog attach *PROG* *ATTACH_TYPE* [*MAP*]
+    Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*). Most
+    *ATTACH_TYPEs* require a *MAP* parameter, with the exception of
+    *flow_dissector* which is attached to current networking name space.
+
+bpftool prog detach *PROG* *ATTACH_TYPE* [*MAP*]
+    Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*). Most
+    *ATTACH_TYPEs* require a *MAP* parameter, with the exception of
+    *flow_dissector* which is detached from the current networking name space.
+
+bpftool prog tracelog
+    Dump the trace pipe of the system to the console (stdout). Hit <Ctrl+C> to
+    stop printing. BPF programs can write to this trace pipe at runtime with
+    the **bpf_trace_printk**\ () helper. This should be used only for debugging
+    purposes. For streaming data from BPF programs to user space, one can use
+    perf events (see also **bpftool-map**\ (8)).
+
+bpftool prog run *PROG* data_in *FILE* [data_out *FILE* [data_size_out *L*]] [ctx_in *FILE* [ctx_out *FILE* [ctx_size_out *M*]]] [repeat *N*]
+    Run BPF program *PROG* in the kernel testing infrastructure for BPF,
+    meaning that the program works on the data and context provided by the
+    user, and not on actual packets or monitored functions etc. Return value
+    and duration for the test run are printed out to the console.
+
+    Input data is read from the *FILE* passed with **data_in**. If this *FILE*
+    is "**-**", input data is read from standard input. Input context, if any,
+    is read from *FILE* passed with **ctx_in**. Again, "**-**" can be used to
+    read from standard input, but only if standard input is not already in use
+    for input data. If a *FILE* is passed with **data_out**, output data is
+    written to that file. Similarly, output context is written to the *FILE*
+    passed with **ctx_out**. For both output flows, "**-**" can be used to
+    print to the standard output (as plain text, or JSON if relevant option was
+    passed). If output keywords are omitted, output data and context are
+    discarded. Keywords **data_size_out** and **ctx_size_out** are used to pass
+    the size (in bytes) for the output buffers to the kernel, although the
+    default of 32 kB should be more than enough for most cases.
+
+    Keyword **repeat** is used to indicate the number of consecutive runs to
+    perform. Note that output data and context printed to files correspond to
+    the last of those runs. The duration printed out at the end of the runs is
+    an average over all runs performed by the command.
+
+    Not all program types support test run. Among those which do, not all of
+    them can take the **ctx_in**/**ctx_out** arguments. bpftool does not
+    perform checks on program types.
+
+bpftool prog profile *PROG* [duration *DURATION*] *METRICs*
+    Profile *METRICs* for bpf program *PROG* for *DURATION* seconds or until
+    user hits <Ctrl+C>. *DURATION* is optional. If *DURATION* is not specified,
+    the profiling will run up to **UINT_MAX** seconds.
+
+bpftool prog help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
-
-	-f, --bpffs
-		  When showing BPF programs, show file names of pinned
-		  programs.
-
-	-m, --mapcompat
-		  Allow loading maps with unknown map definitions.
-
-	-n, --nomount
-		  Do not automatically attempt to mount any virtual file system
-		  (such as tracefs or BPF virtual file system) when necessary.
-
-	-L, --use-loader
-		  Load program as a "loader" program. This is useful to debug
-		  the generation of such programs. When this option is in
-		  use, bpftool attempts to load the programs from the object
-		  file into the kernel, but does not pin them (therefore, the
-		  *PATH* must not be provided).
-
-		  When combined with the **-d**\ \|\ **--debug** option,
-		  additional debug messages are generated, and the execution
-		  of the loader program will use the **bpf_trace_printk**\ ()
-		  helper to log each step of loading BTF, creating the maps,
-		  and loading the programs (see **bpftool prog tracelog** as
-		  a way to dump those messages).
+.. include:: common_options.rst
+
+-f, --bpffs
+    When showing BPF programs, show file names of pinned programs.
+
+-m, --mapcompat
+    Allow loading maps with unknown map definitions.
+
+-n, --nomount
+    Do not automatically attempt to mount any virtual file system (such as
+    tracefs or BPF virtual file system) when necessary.
+
+-L, --use-loader
+    Load program as a "loader" program. This is useful to debug the generation
+    of such programs. When this option is in use, bpftool attempts to load the
+    programs from the object file into the kernel, but does not pin them
+    (therefore, the *PATH* must not be provided).
+
+    When combined with the **-d**\ \|\ **--debug** option, additional debug
+    messages are generated, and the execution of the loader program will use
+    the **bpf_trace_printk**\ () helper to log each step of loading BTF,
+    creating the maps, and loading the programs (see **bpftool prog tracelog**
+    as a way to dump those messages).
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst b/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst
index 8022b5321dbe..e871b9539ac7 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-struct_ops.rst
@@ -14,61 +14,60 @@ tool to register/unregister/introspect BPF struct_ops
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] **struct_ops** *COMMAND*
+**bpftool** [*OPTIONS*] **struct_ops** *COMMAND*
 
-	*OPTIONS* := { |COMMON_OPTIONS| }
+*OPTIONS* := { |COMMON_OPTIONS| }
 
-	*COMMANDS* :=
-	{ **show** | **list** | **dump** | **register** | **unregister** | **help** }
+*COMMANDS* :=
+{ **show** | **list** | **dump** | **register** | **unregister** | **help** }
 
 STRUCT_OPS COMMANDS
 ===================
 
-|	**bpftool** **struct_ops { show | list }** [*STRUCT_OPS_MAP*]
-|	**bpftool** **struct_ops dump** [*STRUCT_OPS_MAP*]
-|	**bpftool** **struct_ops register** *OBJ* [*LINK_DIR*]
-|	**bpftool** **struct_ops unregister** *STRUCT_OPS_MAP*
-|	**bpftool** **struct_ops help**
+| **bpftool** **struct_ops { show | list }** [*STRUCT_OPS_MAP*]
+| **bpftool** **struct_ops dump** [*STRUCT_OPS_MAP*]
+| **bpftool** **struct_ops register** *OBJ* [*LINK_DIR*]
+| **bpftool** **struct_ops unregister** *STRUCT_OPS_MAP*
+| **bpftool** **struct_ops help**
 |
-|	*STRUCT_OPS_MAP* := { **id** *STRUCT_OPS_MAP_ID* | **name** *STRUCT_OPS_MAP_NAME* }
-|	*OBJ* := /a/file/of/bpf_struct_ops.o
+| *STRUCT_OPS_MAP* := { **id** *STRUCT_OPS_MAP_ID* | **name** *STRUCT_OPS_MAP_NAME* }
+| *OBJ* := /a/file/of/bpf_struct_ops.o
 
 
 DESCRIPTION
 ===========
-	**bpftool struct_ops { show | list }** [*STRUCT_OPS_MAP*]
-		  Show brief information about the struct_ops in the system.
-		  If *STRUCT_OPS_MAP* is specified, it shows information only
-		  for the given struct_ops.  Otherwise, it lists all struct_ops
-		  currently existing in the system.
-
-		  Output will start with struct_ops map ID, followed by its map
-		  name and its struct_ops's kernel type.
-
-	**bpftool struct_ops dump** [*STRUCT_OPS_MAP*]
-		  Dump details information about the struct_ops in the system.
-		  If *STRUCT_OPS_MAP* is specified, it dumps information only
-		  for the given struct_ops.  Otherwise, it dumps all struct_ops
-		  currently existing in the system.
-
-	**bpftool struct_ops register** *OBJ* [*LINK_DIR*]
-		  Register bpf struct_ops from *OBJ*.  All struct_ops under
-		  the ELF section ".struct_ops" and ".struct_ops.link" will
-		  be registered to its kernel subsystem.  For each
-		  struct_ops in the ".struct_ops.link" section, a link
-		  will be created.  You can give *LINK_DIR* to provide a
-		  directory path where these links will be pinned with the
-		  same name as their corresponding map name.
-
-	**bpftool struct_ops unregister**  *STRUCT_OPS_MAP*
-		  Unregister the *STRUCT_OPS_MAP* from the kernel subsystem.
-
-	**bpftool struct_ops help**
-		  Print short help message.
+bpftool struct_ops { show | list } [*STRUCT_OPS_MAP*]
+    Show brief information about the struct_ops in the system. If
+    *STRUCT_OPS_MAP* is specified, it shows information only for the given
+    struct_ops.  Otherwise, it lists all struct_ops currently existing in the
+    system.
+
+    Output will start with struct_ops map ID, followed by its map name and its
+    struct_ops's kernel type.
+
+bpftool struct_ops dump [*STRUCT_OPS_MAP*]
+    Dump details information about the struct_ops in the system. If
+    *STRUCT_OPS_MAP* is specified, it dumps information only for the given
+    struct_ops.  Otherwise, it dumps all struct_ops currently existing in the
+    system.
+
+bpftool struct_ops register *OBJ* [*LINK_DIR*]
+    Register bpf struct_ops from *OBJ*.  All struct_ops under the ELF section
+    ".struct_ops" and ".struct_ops.link" will be registered to its kernel
+    subsystem.  For each struct_ops in the ".struct_ops.link" section, a link
+    will be created.  You can give *LINK_DIR* to provide a directory path where
+    these links will be pinned with the same name as their corresponding map
+    name.
+
+bpftool struct_ops unregister  *STRUCT_OPS_MAP*
+    Unregister the *STRUCT_OPS_MAP* from the kernel subsystem.
+
+bpftool struct_ops help
+    Print short help message.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
 EXAMPLES
 ========
diff --git a/tools/bpf/bpftool/Documentation/bpftool.rst b/tools/bpf/bpftool/Documentation/bpftool.rst
index 09e4f2ff5658..f38ae5c40439 100644
--- a/tools/bpf/bpftool/Documentation/bpftool.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool.rst
@@ -14,57 +14,57 @@ tool for inspection and simple manipulation of eBPF programs and maps
 SYNOPSIS
 ========
 
-	**bpftool** [*OPTIONS*] *OBJECT* { *COMMAND* | **help** }
+**bpftool** [*OPTIONS*] *OBJECT* { *COMMAND* | **help** }
 
-	**bpftool** **batch file** *FILE*
+**bpftool** **batch file** *FILE*
 
-	**bpftool** **version**
+**bpftool** **version**
 
-	*OBJECT* := { **map** | **prog** | **link** | **cgroup** | **perf** | **net** | **feature** |
-	**btf** | **gen** | **struct_ops** | **iter** }
+*OBJECT* := { **map** | **prog** | **link** | **cgroup** | **perf** | **net** | **feature** |
+**btf** | **gen** | **struct_ops** | **iter** }
 
-	*OPTIONS* := { { **-V** | **--version** } | |COMMON_OPTIONS| }
+*OPTIONS* := { { **-V** | **--version** } | |COMMON_OPTIONS| }
 
-	*MAP-COMMANDS* :=
-	{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** |
-	**delete** | **pin** | **event_pipe** | **help** }
+*MAP-COMMANDS* :=
+{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** |
+**delete** | **pin** | **event_pipe** | **help** }
 
-	*PROG-COMMANDS* := { **show** | **list** | **dump jited** | **dump xlated** | **pin** |
-	**load** | **attach** | **detach** | **help** }
+*PROG-COMMANDS* := { **show** | **list** | **dump jited** | **dump xlated** | **pin** |
+**load** | **attach** | **detach** | **help** }
 
-	*LINK-COMMANDS* := { **show** | **list** | **pin** | **detach** | **help** }
+*LINK-COMMANDS* := { **show** | **list** | **pin** | **detach** | **help** }
 
-	*CGROUP-COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** }
+*CGROUP-COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** }
 
-	*PERF-COMMANDS* := { **show** | **list** | **help** }
+*PERF-COMMANDS* := { **show** | **list** | **help** }
 
-	*NET-COMMANDS* := { **show** | **list** | **help** }
+*NET-COMMANDS* := { **show** | **list** | **help** }
 
-	*FEATURE-COMMANDS* := { **probe** | **help** }
+*FEATURE-COMMANDS* := { **probe** | **help** }
 
-	*BTF-COMMANDS* := { **show** | **list** | **dump** | **help** }
+*BTF-COMMANDS* := { **show** | **list** | **dump** | **help** }
 
-	*GEN-COMMANDS* := { **object** | **skeleton** | **min_core_btf** | **help** }
+*GEN-COMMANDS* := { **object** | **skeleton** | **min_core_btf** | **help** }
 
-	*STRUCT-OPS-COMMANDS* := { **show** | **list** | **dump** | **register** | **unregister** | **help** }
+*STRUCT-OPS-COMMANDS* := { **show** | **list** | **dump** | **register** | **unregister** | **help** }
 
-	*ITER-COMMANDS* := { **pin** | **help** }
+*ITER-COMMANDS* := { **pin** | **help** }
 
 DESCRIPTION
 ===========
-	*bpftool* allows for inspection and simple modification of BPF objects
-	on the system.
+*bpftool* allows for inspection and simple modification of BPF objects on the
+system.
 
-	Note that format of the output of all tools is not guaranteed to be
-	stable and should not be depended upon.
+Note that format of the output of all tools is not guaranteed to be stable and
+should not be depended upon.
 
 OPTIONS
 =======
-	.. include:: common_options.rst
+.. include:: common_options.rst
 
-	-m, --mapcompat
-		  Allow loading maps with unknown map definitions.
+-m, --mapcompat
+    Allow loading maps with unknown map definitions.
 
-	-n, --nomount
-		  Do not automatically attempt to mount any virtual file system
-		  (such as tracefs or BPF virtual file system) when necessary.
+-n, --nomount
+    Do not automatically attempt to mount any virtual file system (such as
+    tracefs or BPF virtual file system) when necessary.
diff --git a/tools/bpf/bpftool/Documentation/common_options.rst b/tools/bpf/bpftool/Documentation/common_options.rst
index 30df7a707f02..9234b9dab768 100644
--- a/tools/bpf/bpftool/Documentation/common_options.rst
+++ b/tools/bpf/bpftool/Documentation/common_options.rst
@@ -1,25 +1,23 @@
 .. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 
 -h, --help
-	  Print short help message (similar to **bpftool help**).
+    Print short help message (similar to **bpftool help**).
 
 -V, --version
-	  Print bpftool's version number (similar to **bpftool version**), the
-	  number of the libbpf version in use, and optional features that were
-	  included when bpftool was compiled. Optional features include linking
-	  against LLVM or libbfd to provide the disassembler for JIT-ted
-	  programs (**bpftool prog dump jited**) and usage of BPF skeletons
-	  (some features like **bpftool prog profile** or showing pids
-	  associated to BPF objects may rely on it).
+    Print bpftool's version number (similar to **bpftool version**), the number
+    of the libbpf version in use, and optional features that were included when
+    bpftool was compiled. Optional features include linking against LLVM or
+    libbfd to provide the disassembler for JIT-ted programs (**bpftool prog
+    dump jited**) and usage of BPF skeletons (some features like **bpftool prog
+    profile** or showing pids associated to BPF objects may rely on it).
 
 -j, --json
-	  Generate JSON output. For commands that cannot produce JSON, this
-	  option has no effect.
+    Generate JSON output. For commands that cannot produce JSON, this option
+    has no effect.
 
 -p, --pretty
-	  Generate human-readable JSON output. Implies **-j**.
+    Generate human-readable JSON output. Implies **-j**.
 
 -d, --debug
-	  Print all logs available, even debug-level information. This includes
-	  logs from libbpf as well as from the verifier, when attempting to
-	  load programs.
+    Print all logs available, even debug-level information. This includes logs
+    from libbpf as well as from the verifier, when attempting to load programs.
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index e9154ace80ff..dfa4f1bebbb3 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -89,6 +89,10 @@ ifneq ($(EXTRA_LDFLAGS),)
 LDFLAGS += $(EXTRA_LDFLAGS)
 endif
 
+HOST_CFLAGS := $(subst -I$(LIBBPF_INCLUDE),-I$(LIBBPF_BOOTSTRAP_INCLUDE),\
+		$(subst $(CLANG_CROSS_FLAGS),,$(CFLAGS)))
+HOST_LDFLAGS := $(LDFLAGS)
+
 INSTALL ?= install
 RM ?= rm -f
 
@@ -143,7 +147,7 @@ ifeq ($(feature-llvm),1)
   # If LLVM is available, use it for JIT disassembly
   CFLAGS  += -DHAVE_LLVM_SUPPORT
   LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets
-  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags --libs $(LLVM_CONFIG_LIB_COMPONENTS))
+  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags)
   LIBS    += $(shell $(LLVM_CONFIG) --libs $(LLVM_CONFIG_LIB_COMPONENTS))
   ifeq ($(shell $(LLVM_CONFIG) --shared-mode),static)
     LIBS += $(shell $(LLVM_CONFIG) --system-libs $(LLVM_CONFIG_LIB_COMPONENTS))
@@ -178,12 +182,9 @@ ifeq ($(filter -DHAVE_LLVM_SUPPORT -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),)
   SRCS := $(filter-out jit_disasm.c,$(SRCS))
 endif
 
-HOST_CFLAGS = $(subst -I$(LIBBPF_INCLUDE),-I$(LIBBPF_BOOTSTRAP_INCLUDE),\
-		$(subst $(CLANG_CROSS_FLAGS),,$(CFLAGS)))
-
 BPFTOOL_BOOTSTRAP := $(BOOTSTRAP_OUTPUT)bpftool
 
-BOOTSTRAP_OBJS = $(addprefix $(BOOTSTRAP_OUTPUT),main.o common.o json_writer.o gen.o btf.o xlated_dumper.o btf_dumper.o disasm.o)
+BOOTSTRAP_OBJS = $(addprefix $(BOOTSTRAP_OUTPUT),main.o common.o json_writer.o gen.o btf.o)
 $(BOOTSTRAP_OBJS): $(LIBBPF_BOOTSTRAP)
 
 OBJS = $(patsubst %.c,$(OUTPUT)%.o,$(SRCS)) $(OUTPUT)disasm.o
@@ -231,14 +232,11 @@ endif
 
 CFLAGS += $(if $(BUILD_BPF_SKELS),,-DBPFTOOL_WITHOUT_SKELETONS)
 
-$(BOOTSTRAP_OUTPUT)disasm.o: $(srctree)/kernel/bpf/disasm.c
-	$(QUIET_CC)$(HOSTCC) $(HOST_CFLAGS) -c -MMD $< -o $@
-
 $(OUTPUT)disasm.o: $(srctree)/kernel/bpf/disasm.c
 	$(QUIET_CC)$(CC) $(CFLAGS) -c -MMD $< -o $@
 
 $(BPFTOOL_BOOTSTRAP): $(BOOTSTRAP_OBJS) $(LIBBPF_BOOTSTRAP)
-	$(QUIET_LINK)$(HOSTCC) $(HOST_CFLAGS) $(LDFLAGS) $(BOOTSTRAP_OBJS) $(LIBS_BOOTSTRAP) -o $@
+	$(QUIET_LINK)$(HOSTCC) $(HOST_CFLAGS) $(HOST_LDFLAGS) $(BOOTSTRAP_OBJS) $(LIBS_BOOTSTRAP) -o $@
 
 $(OUTPUT)bpftool: $(OBJS) $(LIBBPF)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) -o $@
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 6e4f7ce6bc01..04afe2ac2228 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -106,19 +106,19 @@ _bpftool_get_link_ids()
 
 _bpftool_get_obj_map_names()
 {
-    local obj
+    local obj maps
 
     obj=$1
 
-    maps=$(objdump -j maps -t $obj 2>/dev/null | \
-        command awk '/g     . maps/ {print $NF}')
+    maps=$(objdump -j .maps -t $obj 2>/dev/null | \
+        command awk '/g     . .maps/ {print $NF}')
 
     COMPREPLY+=( $( compgen -W "$maps" -- "$cur" ) )
 }
 
 _bpftool_get_obj_map_idxs()
 {
-    local obj
+    local obj nmaps
 
     obj=$1
 
@@ -136,7 +136,7 @@ _sysfs_get_netdevs()
 # Retrieve type of the map that we are operating on.
 _bpftool_map_guess_map_type()
 {
-    local keyword ref
+    local keyword idx ref=""
     for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
         case "${words[$((idx-2))]}" in
             lookup|update)
@@ -255,8 +255,9 @@ _bpftool_map_update_get_name()
 
 _bpftool()
 {
-    local cur prev words objword json=0
-    _init_completion || return
+    local cur prev words cword comp_args
+    local json=0
+    _init_completion -- "$@" || return
 
     # Deal with options
     if [[ ${words[cword]} == -* ]]; then
@@ -293,7 +294,7 @@ _bpftool()
     esac
 
     # Remove all options so completions don't have to deal with them.
-    local i
+    local i pprev
     for (( i=1; i < ${#words[@]}; )); do
         if [[ ${words[i]::1} == - ]] &&
             [[ ${words[i]} != "-B" ]] && [[ ${words[i]} != "--base-btf" ]]; then
@@ -307,7 +308,7 @@ _bpftool()
     prev=${words[cword - 1]}
     pprev=${words[cword - 2]}
 
-    local object=${words[1]} command=${words[2]}
+    local object=${words[1]}
 
     if [[ -z $object || $cword -eq 1 ]]; then
         case $cur in
@@ -324,8 +325,12 @@ _bpftool()
         esac
     fi
 
+    local command=${words[2]}
     [[ $command == help ]] && return 0
 
+    local MAP_TYPE='id pinned name'
+    local PROG_TYPE='id pinned tag name'
+
     # Completion depends on object and command in use
     case $object in
         prog)
@@ -346,8 +351,6 @@ _bpftool()
                     ;;
             esac
 
-            local PROG_TYPE='id pinned tag name'
-            local MAP_TYPE='id pinned name'
             local METRIC_TYPE='cycles instructions l1d_loads llc_misses \
                 itlb_misses dtlb_misses'
             case $command in
@@ -457,7 +460,7 @@ _bpftool()
                     obj=${words[3]}
 
                     if [[ ${words[-4]} == "map" ]]; then
-                        COMPREPLY=( $( compgen -W "id pinned" -- "$cur" ) )
+                        COMPREPLY=( $( compgen -W "$MAP_TYPE" -- "$cur" ) )
                         return 0
                     fi
                     if [[ ${words[-3]} == "map" ]]; then
@@ -541,20 +544,9 @@ _bpftool()
                             COMPREPLY=( $( compgen -W "$METRIC_TYPE duration" -- "$cur" ) )
                             return 0
                             ;;
-                        6)
-                            case $prev in
-                                duration)
-                                    return 0
-                                    ;;
-                                *)
-                                    COMPREPLY=( $( compgen -W "$METRIC_TYPE" -- "$cur" ) )
-                                    return 0
-                                    ;;
-                            esac
-                            return 0
-                            ;;
                         *)
-                            COMPREPLY=( $( compgen -W "$METRIC_TYPE" -- "$cur" ) )
+                            [[ $prev == duration ]] && return 0
+                            _bpftool_once_attr "$METRIC_TYPE"
                             return 0
                             ;;
                     esac
@@ -612,7 +604,7 @@ _bpftool()
                     return 0
                     ;;
                 register)
-                    _filedir
+                    [[ $prev == $command ]] && _filedir
                     return 0
                     ;;
                 *)
@@ -638,9 +630,12 @@ _bpftool()
                         pinned)
                             _filedir
                             ;;
-                        *)
+                        map)
                             _bpftool_one_of_list $MAP_TYPE
                             ;;
+                        *)
+                            _bpftool_once_attr 'map'
+                            ;;
                     esac
                     return 0
                     ;;
@@ -652,7 +647,6 @@ _bpftool()
             esac
             ;;
         map)
-            local MAP_TYPE='id pinned name'
             case $command in
                 show|list|dump|peek|pop|dequeue|freeze)
                     case $prev in
@@ -793,13 +787,11 @@ _bpftool()
                             # map, depending on the type of the map to update.
                             case "$(_bpftool_map_guess_map_type)" in
                                 array_of_maps|hash_of_maps)
-                                    local MAP_TYPE='id pinned name'
                                     COMPREPLY+=( $( compgen -W "$MAP_TYPE" \
                                         -- "$cur" ) )
                                     return 0
                                     ;;
                                 prog_array)
-                                    local PROG_TYPE='id pinned tag name'
                                     COMPREPLY+=( $( compgen -W "$PROG_TYPE" \
                                         -- "$cur" ) )
                                     return 0
@@ -821,7 +813,7 @@ _bpftool()
                             esac
 
                             _bpftool_once_attr 'key'
-                            local UPDATE_FLAGS='any exist noexist'
+                            local UPDATE_FLAGS='any exist noexist' idx
                             for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
                                 if [[ ${words[idx]} == 'value' ]]; then
                                     # 'value' is present, but is not the last
@@ -893,7 +885,6 @@ _bpftool()
             esac
             ;;
         btf)
-            local PROG_TYPE='id pinned tag name'
             local MAP_TYPE='id pinned name'
             case $command in
                 dump)
@@ -1033,7 +1024,6 @@ _bpftool()
                     local BPFTOOL_CGROUP_ATTACH_TYPES="$(bpftool feature list_builtins attach_types 2>/dev/null | \
                         grep '^cgroup_')"
                     local ATTACH_FLAGS='multi override'
-                    local PROG_TYPE='id pinned tag name'
                     # Check for $prev = $command first
                     if [ $prev = $command ]; then
                         _filedir
@@ -1086,7 +1076,6 @@ _bpftool()
             esac
             ;;
         net)
-            local PROG_TYPE='id pinned tag name'
             local ATTACH_TYPES='xdp xdpgeneric xdpdrv xdpoffload'
             case $command in
                 show|list)
@@ -1193,14 +1182,14 @@ _bpftool()
                 pin|detach)
                     if [[ $prev == "$command" ]]; then
                         COMPREPLY=( $( compgen -W "$LINK_TYPE" -- "$cur" ) )
-                    else
+                    elif [[ $pprev == "$command" ]]; then
                         _filedir
                     fi
                     return 0
                     ;;
                 *)
                     [[ $prev == $object ]] && \
-                        COMPREPLY=( $( compgen -W 'help pin show list' -- "$cur" ) )
+                        COMPREPLY=( $( compgen -W 'help pin detach show list' -- "$cur" ) )
                     ;;
             esac
             ;;
diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index cc6e6aae2447..958e92acca8e 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -244,29 +244,101 @@ int open_obj_pinned_any(const char *path, enum bpf_obj_type exp_type)
 	return fd;
 }
 
-int mount_bpffs_for_pin(const char *name, bool is_dir)
+int create_and_mount_bpffs_dir(const char *dir_name)
 {
 	char err_str[ERR_MAX_LEN];
-	char *file;
-	char *dir;
+	bool dir_exists;
 	int err = 0;
 
-	if (is_dir && is_bpffs(name))
+	if (is_bpffs(dir_name))
 		return err;
 
-	file = malloc(strlen(name) + 1);
-	if (!file) {
+	dir_exists = access(dir_name, F_OK) == 0;
+
+	if (!dir_exists) {
+		char *temp_name;
+		char *parent_name;
+
+		temp_name = strdup(dir_name);
+		if (!temp_name) {
+			p_err("mem alloc failed");
+			return -1;
+		}
+
+		parent_name = dirname(temp_name);
+
+		if (is_bpffs(parent_name)) {
+			/* nothing to do if already mounted */
+			free(temp_name);
+			return err;
+		}
+
+		if (access(parent_name, F_OK) == -1) {
+			p_err("can't create dir '%s' to pin BPF object: parent dir '%s' doesn't exist",
+			      dir_name, parent_name);
+			free(temp_name);
+			return -1;
+		}
+
+		free(temp_name);
+	}
+
+	if (block_mount) {
+		p_err("no BPF file system found, not mounting it due to --nomount option");
+		return -1;
+	}
+
+	if (!dir_exists) {
+		err = mkdir(dir_name, S_IRWXU);
+		if (err) {
+			p_err("failed to create dir '%s': %s", dir_name, strerror(errno));
+			return err;
+		}
+	}
+
+	err = mnt_fs(dir_name, "bpf", err_str, ERR_MAX_LEN);
+	if (err) {
+		err_str[ERR_MAX_LEN - 1] = '\0';
+		p_err("can't mount BPF file system on given dir '%s': %s",
+		      dir_name, err_str);
+
+		if (!dir_exists)
+			rmdir(dir_name);
+	}
+
+	return err;
+}
+
+int mount_bpffs_for_file(const char *file_name)
+{
+	char err_str[ERR_MAX_LEN];
+	char *temp_name;
+	char *dir;
+	int err = 0;
+
+	if (access(file_name, F_OK) != -1) {
+		p_err("can't pin BPF object: path '%s' already exists", file_name);
+		return -1;
+	}
+
+	temp_name = strdup(file_name);
+	if (!temp_name) {
 		p_err("mem alloc failed");
 		return -1;
 	}
 
-	strcpy(file, name);
-	dir = dirname(file);
+	dir = dirname(temp_name);
 
 	if (is_bpffs(dir))
 		/* nothing to do if already mounted */
 		goto out_free;
 
+	if (access(dir, F_OK) == -1) {
+		p_err("can't pin BPF object: dir '%s' doesn't exist", dir);
+		err = -1;
+		goto out_free;
+	}
+
 	if (block_mount) {
 		p_err("no BPF file system found, not mounting it due to --nomount option");
 		err = -1;
@@ -276,12 +348,12 @@ int mount_bpffs_for_pin(const char *name, bool is_dir)
 	err = mnt_fs(dir, "bpf", err_str, ERR_MAX_LEN);
 	if (err) {
 		err_str[ERR_MAX_LEN - 1] = '\0';
-		p_err("can't mount BPF file system to pin the object (%s): %s",
-		      name, err_str);
+		p_err("can't mount BPF file system to pin the object '%s': %s",
+		      file_name, err_str);
 	}
 
 out_free:
-	free(file);
+	free(temp_name);
 	return err;
 }
 
@@ -289,7 +361,7 @@ int do_pin_fd(int fd, const char *name)
 {
 	int err;
 
-	err = mount_bpffs_for_pin(name, false);
+	err = mount_bpffs_for_file(name);
 	if (err)
 		return err;
 
diff --git a/tools/bpf/bpftool/feature.c b/tools/bpf/bpftool/feature.c
index 708733b0ea06..c754a428c8c6 100644
--- a/tools/bpf/bpftool/feature.c
+++ b/tools/bpf/bpftool/feature.c
@@ -664,7 +664,8 @@ probe_helper_ifindex(enum bpf_func_id id, enum bpf_prog_type prog_type,
 
 	probe_prog_load_ifindex(prog_type, insns, ARRAY_SIZE(insns), buf,
 				sizeof(buf), ifindex);
-	res = !grep(buf, "invalid func ") && !grep(buf, "unknown func ");
+	res = !grep(buf, "invalid func ") && !grep(buf, "unknown func ") &&
+		!grep(buf, "program of this type cannot use helper ");
 
 	switch (get_vendor_id(ifindex)) {
 	case 0x19ee: /* Netronome specific */
diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c
index 540c0f2c4fda..b3979ddc0189 100644
--- a/tools/bpf/bpftool/gen.c
+++ b/tools/bpf/bpftool/gen.c
@@ -386,7 +386,7 @@ static int codegen_subskel_datasecs(struct bpf_object *obj, const char *obj_name
 			 */
 			needs_typeof = btf_is_array(var) || btf_is_ptr_to_func_proto(btf, var);
 			if (needs_typeof)
-				printf("typeof(");
+				printf("__typeof__(");
 
 			err = btf_dump__emit_type_decl(d, var_type_id, &opts);
 			if (err)
@@ -1131,7 +1131,8 @@ static void gen_st_ops_shadow_init(struct btf *btf, struct bpf_object *obj)
 			continue;
 		codegen("\
 			\n\
-				obj->struct_ops.%1$s = bpf_map__initial_value(obj->maps.%1$s, NULL);\n\
+				obj->struct_ops.%1$s = (__typeof__(obj->struct_ops.%1$s))\n\
+					bpf_map__initial_value(obj->maps.%1$s, NULL);\n\
 			\n\
 			", ident);
 	}
diff --git a/tools/bpf/bpftool/iter.c b/tools/bpf/bpftool/iter.c
index 6b0e5202ca7a..5c39c2ed36a2 100644
--- a/tools/bpf/bpftool/iter.c
+++ b/tools/bpf/bpftool/iter.c
@@ -76,7 +76,7 @@ static int do_pin(int argc, char **argv)
 		goto close_obj;
 	}
 
-	err = mount_bpffs_for_pin(path, false);
+	err = mount_bpffs_for_file(path);
 	if (err)
 		goto close_link;
 
diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c
index afde9d0c2ea1..5cd503b763d7 100644
--- a/tools/bpf/bpftool/link.c
+++ b/tools/bpf/bpftool/link.c
@@ -526,6 +526,10 @@ static int show_link_close_json(int fd, struct bpf_link_info *info)
 		show_link_ifindex_json(info->netkit.ifindex, json_wtr);
 		show_link_attach_type_json(info->netkit.attach_type, json_wtr);
 		break;
+	case BPF_LINK_TYPE_SOCKMAP:
+		jsonw_uint_field(json_wtr, "map_id", info->sockmap.map_id);
+		show_link_attach_type_json(info->sockmap.attach_type, json_wtr);
+		break;
 	case BPF_LINK_TYPE_XDP:
 		show_link_ifindex_json(info->xdp.ifindex, json_wtr);
 		break;
@@ -915,6 +919,11 @@ static int show_link_close_plain(int fd, struct bpf_link_info *info)
 		show_link_ifindex_plain(info->netkit.ifindex);
 		show_link_attach_type_plain(info->netkit.attach_type);
 		break;
+	case BPF_LINK_TYPE_SOCKMAP:
+		printf("\n\t");
+		printf("map_id %u  ", info->sockmap.map_id);
+		show_link_attach_type_plain(info->sockmap.attach_type);
+		break;
 	case BPF_LINK_TYPE_XDP:
 		printf("\n\t");
 		show_link_ifindex_plain(info->xdp.ifindex);
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index b8bb08d10dec..9eb764fe4cc8 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -142,7 +142,8 @@ const char *get_fd_type_name(enum bpf_obj_type type);
 char *get_fdinfo(int fd, const char *key);
 int open_obj_pinned(const char *path, bool quiet);
 int open_obj_pinned_any(const char *path, enum bpf_obj_type exp_type);
-int mount_bpffs_for_pin(const char *name, bool is_dir);
+int mount_bpffs_for_file(const char *file_name);
+int create_and_mount_bpffs_dir(const char *dir_name);
 int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(int *, char ***));
 int do_pin_fd(int fd, const char *name);
 
diff --git a/tools/bpf/bpftool/pids.c b/tools/bpf/bpftool/pids.c
index 00c77edb6331..9b898571b49e 100644
--- a/tools/bpf/bpftool/pids.c
+++ b/tools/bpf/bpftool/pids.c
@@ -101,7 +101,6 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type)
 	char buf[4096 / sizeof(*e) * sizeof(*e)];
 	struct pid_iter_bpf *skel;
 	int err, ret, fd = -1, i;
-	libbpf_print_fn_t default_print;
 
 	*map = hashmap__new(hash_fn_for_key_as_id, equal_fn_for_key_as_id, NULL);
 	if (IS_ERR(*map)) {
@@ -118,12 +117,18 @@ int build_obj_refs_table(struct hashmap **map, enum bpf_obj_type type)
 
 	skel->rodata->obj_type = type;
 
-	/* we don't want output polluted with libbpf errors if bpf_iter is not
-	 * supported
-	 */
-	default_print = libbpf_set_print(libbpf_print_none);
-	err = pid_iter_bpf__load(skel);
-	libbpf_set_print(default_print);
+	if (!verifier_logs) {
+		libbpf_print_fn_t default_print;
+
+		/* Unless debug information is on, we don't want the output to
+		 * be polluted with libbpf errors if bpf_iter is not supported.
+		 */
+		default_print = libbpf_set_print(libbpf_print_none);
+		err = pid_iter_bpf__load(skel);
+		libbpf_set_print(default_print);
+	} else {
+		err = pid_iter_bpf__load(skel);
+	}
 	if (err) {
 		/* too bad, kernel doesn't support BPF iterators yet */
 		err = 0;
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 9cb42a3366c0..1a501cf09e78 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -1778,7 +1778,10 @@ offload_dev:
 		goto err_close_obj;
 	}
 
-	err = mount_bpffs_for_pin(pinfile, !first_prog_only);
+	if (first_prog_only)
+		err = mount_bpffs_for_file(pinfile);
+	else
+		err = create_and_mount_bpffs_dir(pinfile);
 	if (err)
 		goto err_close_obj;
 
@@ -2078,7 +2081,7 @@ static int profile_parse_metrics(int argc, char **argv)
 		NEXT_ARG();
 	}
 	if (selected_cnt > MAX_NUM_PROFILE_METRICS) {
-		p_err("too many (%d) metrics, please specify no more than %d metrics at at time",
+		p_err("too many (%d) metrics, please specify no more than %d metrics at a time",
 		      selected_cnt, MAX_NUM_PROFILE_METRICS);
 		return -1;
 	}
diff --git a/tools/bpf/bpftool/skeleton/pid_iter.bpf.c b/tools/bpf/bpftool/skeleton/pid_iter.bpf.c
index 26004f0c5a6a..7bdbcac3cf62 100644
--- a/tools/bpf/bpftool/skeleton/pid_iter.bpf.c
+++ b/tools/bpf/bpftool/skeleton/pid_iter.bpf.c
@@ -102,8 +102,8 @@ int iter(struct bpf_iter__task_file *ctx)
 				       BPF_LINK_TYPE_PERF_EVENT___local)) {
 		struct bpf_link *link = (struct bpf_link *) file->private_data;
 
-		if (link->type == bpf_core_enum_value(enum bpf_link_type___local,
-						      BPF_LINK_TYPE_PERF_EVENT___local)) {
+		if (BPF_CORE_READ(link, type) == bpf_core_enum_value(enum bpf_link_type___local,
+								     BPF_LINK_TYPE_PERF_EVENT___local)) {
 			e.has_bpf_cookie = true;
 			e.bpf_cookie = get_bpf_cookie(link);
 		}
diff --git a/tools/bpf/bpftool/struct_ops.c b/tools/bpf/bpftool/struct_ops.c
index d573f2640d8e..aa43dead249c 100644
--- a/tools/bpf/bpftool/struct_ops.c
+++ b/tools/bpf/bpftool/struct_ops.c
@@ -515,7 +515,7 @@ static int do_register(int argc, char **argv)
 	if (argc == 1)
 		linkdir = GET_ARG();
 
-	if (linkdir && mount_bpffs_for_pin(linkdir, true)) {
+	if (linkdir && create_and_mount_bpffs_dir(linkdir)) {
 		p_err("can't mount bpffs for pinning");
 		return -1;
 	}
diff --git a/tools/include/linux/align.h b/tools/include/linux/align.h
new file mode 100644
index 000000000000..14e34ace80dd
--- /dev/null
+++ b/tools/include/linux/align.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _TOOLS_LINUX_ALIGN_H
+#define _TOOLS_LINUX_ALIGN_H
+
+#include <uapi/linux/const.h>
+
+#define ALIGN(x, a)		__ALIGN_KERNEL((x), (a))
+#define ALIGN_DOWN(x, a)	__ALIGN_KERNEL((x) - ((a) - 1), (a))
+#define IS_ALIGNED(x, a)	(((x) & ((typeof(x))(a) - 1)) == 0)
+
+#endif /* _TOOLS_LINUX_ALIGN_H */
diff --git a/tools/include/linux/bitmap.h b/tools/include/linux/bitmap.h
index f3566ea0f932..210c13b1b857 100644
--- a/tools/include/linux/bitmap.h
+++ b/tools/include/linux/bitmap.h
@@ -3,6 +3,7 @@
 #define _TOOLS_LINUX_BITMAP_H
 
 #include <string.h>
+#include <linux/align.h>
 #include <linux/bitops.h>
 #include <linux/find.h>
 #include <stdlib.h>
@@ -25,13 +26,14 @@ bool __bitmap_intersects(const unsigned long *bitmap1,
 #define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) & (BITS_PER_LONG - 1)))
 #define BITMAP_LAST_WORD_MASK(nbits) (~0UL >> (-(nbits) & (BITS_PER_LONG - 1)))
 
+#define bitmap_size(nbits)	(ALIGN(nbits, BITS_PER_LONG) / BITS_PER_BYTE)
+
 static inline void bitmap_zero(unsigned long *dst, unsigned int nbits)
 {
 	if (small_const_nbits(nbits))
 		*dst = 0UL;
 	else {
-		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
-		memset(dst, 0, len);
+		memset(dst, 0, bitmap_size(nbits));
 	}
 }
 
@@ -83,7 +85,7 @@ static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
  */
 static inline unsigned long *bitmap_zalloc(int nbits)
 {
-	return calloc(1, BITS_TO_LONGS(nbits) * sizeof(unsigned long));
+	return calloc(1, bitmap_size(nbits));
 }
 
 /*
@@ -126,7 +128,6 @@ static inline bool bitmap_and(unsigned long *dst, const unsigned long *src1,
 #define BITMAP_MEM_ALIGNMENT (8 * sizeof(unsigned long))
 #endif
 #define BITMAP_MEM_MASK (BITMAP_MEM_ALIGNMENT - 1)
-#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)
 
 static inline bool bitmap_equal(const unsigned long *src1,
 				const unsigned long *src2, unsigned int nbits)
diff --git a/tools/include/linux/bitops.h b/tools/include/linux/bitops.h
index 7319f6ced108..272f15d0e434 100644
--- a/tools/include/linux/bitops.h
+++ b/tools/include/linux/bitops.h
@@ -20,6 +20,8 @@
 #define BITS_TO_U32(nr)		DIV_ROUND_UP(nr, BITS_PER_TYPE(u32))
 #define BITS_TO_BYTES(nr)	DIV_ROUND_UP(nr, BITS_PER_TYPE(char))
 
+#define BYTES_TO_BITS(nb)	((nb) * BITS_PER_BYTE)
+
 extern unsigned int __sw_hweight8(unsigned int w);
 extern unsigned int __sw_hweight16(unsigned int w);
 extern unsigned int __sw_hweight32(unsigned int w);
diff --git a/tools/include/linux/compiler.h b/tools/include/linux/compiler.h
index 7b65566f3e42..8a63a9913495 100644
--- a/tools/include/linux/compiler.h
+++ b/tools/include/linux/compiler.h
@@ -58,6 +58,10 @@
 #define noinline
 #endif
 
+#ifndef __nocf_check
+#define __nocf_check __attribute__((nocf_check))
+#endif
+
 /* Are two types/vars the same type (ignoring qualifiers)? */
 #ifndef __same_type
 # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
diff --git a/tools/include/linux/filter.h b/tools/include/linux/filter.h
index 736bdeccdfe4..65aa8ce142e5 100644
--- a/tools/include/linux/filter.h
+++ b/tools/include/linux/filter.h
@@ -111,6 +111,24 @@
 		.off   = 0,					\
 		.imm   = IMM })
 
+/* Short form of movsx, dst_reg = (s8,s16,s32)src_reg */
+
+#define BPF_MOVSX64_REG(DST, SRC, OFF)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU64 | BPF_MOV | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
+#define BPF_MOVSX32_REG(DST, SRC, OFF)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_MOV | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
 /* Short form of mov based on type,  BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */
 
 #define BPF_MOV64_RAW(TYPE, DST, SRC, IMM)			\
diff --git a/tools/include/linux/mm.h b/tools/include/linux/mm.h
index 7d73da098047..dc0fc7125bc3 100644
--- a/tools/include/linux/mm.h
+++ b/tools/include/linux/mm.h
@@ -2,8 +2,8 @@
 #ifndef _TOOLS_LINUX_MM_H
 #define _TOOLS_LINUX_MM_H
 
+#include <linux/align.h>
 #include <linux/mmzone.h>
-#include <uapi/linux/const.h>
 
 #define PAGE_SHIFT		12
 #define PAGE_SIZE		(_AC(1, UL) << PAGE_SHIFT)
@@ -11,9 +11,6 @@
 
 #define PHYS_ADDR_MAX	(~(phys_addr_t)0)
 
-#define ALIGN(x, a)			__ALIGN_KERNEL((x), (a))
-#define ALIGN_DOWN(x, a)		__ALIGN_KERNEL((x) - ((a) - 1), (a))
-
 #define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
 
 #define __va(x) ((void *)((unsigned long)(x)))
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 3c42b9f1bada..90706a47f6ff 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1115,6 +1115,7 @@ enum bpf_attach_type {
 	BPF_CGROUP_UNIX_GETSOCKNAME,
 	BPF_NETKIT_PRIMARY,
 	BPF_NETKIT_PEER,
+	BPF_TRACE_KPROBE_SESSION,
 	__MAX_BPF_ATTACH_TYPE
 };
 
@@ -1135,6 +1136,7 @@ enum bpf_link_type {
 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
 	BPF_LINK_TYPE_NETKIT = 13,
+	BPF_LINK_TYPE_SOCKMAP = 14,
 	__MAX_BPF_LINK_TYPE,
 };
 
@@ -1662,8 +1664,10 @@ union bpf_attr {
 	} query;
 
 	struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
-		__u64 name;
-		__u32 prog_fd;
+		__u64		name;
+		__u32		prog_fd;
+		__u32		:32;
+		__aligned_u64	cookie;
 	} raw_tracepoint;
 
 	struct { /* anonymous struct for BPF_BTF_LOAD */
@@ -3392,6 +3396,10 @@ union bpf_attr {
  *			for the nexthop. If the src addr cannot be derived,
  *			**BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this
  *			case, *params*->dmac and *params*->smac are not set either.
+ *		**BPF_FIB_LOOKUP_MARK**
+ *			Use the mark present in *params*->mark for the fib lookup.
+ *			This option should not be used with BPF_FIB_LOOKUP_DIRECT,
+ *			as it only has meaning for full lookups.
  *
  *		*ctx* is either **struct xdp_md** for XDP programs or
  *		**struct sk_buff** tc cls_act programs.
@@ -5020,7 +5028,7 @@ union bpf_attr {
  *		bytes will be copied to *dst*
  *	Return
  *		The **hash_algo** is returned on success,
- *		**-EOPNOTSUP** if IMA is disabled or **-EINVAL** if
+ *		**-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if
  *		invalid arguments are passed.
  *
  * struct socket *bpf_sock_from_file(struct file *file)
@@ -5506,7 +5514,7 @@ union bpf_attr {
  *		bytes will be copied to *dst*
  *	Return
  *		The **hash_algo** is returned on success,
- *		**-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if
+ *		**-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if
  *		invalid arguments are passed.
  *
  * void *bpf_kptr_xchg(void *map_value, void *ptr)
@@ -6718,6 +6726,10 @@ struct bpf_link_info {
 			__u32 ifindex;
 			__u32 attach_type;
 		} netkit;
+		struct {
+			__u32 map_id;
+			__u32 attach_type;
+		} sockmap;
 	};
 } __attribute__((aligned(8)));
 
@@ -6936,6 +6948,8 @@ enum {
 					 * socket transition to LISTEN state.
 					 */
 	BPF_SOCK_OPS_RTT_CB,		/* Called on every RTT.
+					 * Arg1: measured RTT input (mrtt)
+					 * Arg2: updated srtt
 					 */
 	BPF_SOCK_OPS_PARSE_HDR_OPT_CB,	/* Parse the header option.
 					 * It will be called to handle
@@ -7118,6 +7132,7 @@ enum {
 	BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
 	BPF_FIB_LOOKUP_TBID    = (1U << 3),
 	BPF_FIB_LOOKUP_SRC     = (1U << 4),
+	BPF_FIB_LOOKUP_MARK    = (1U << 5),
 };
 
 enum {
@@ -7150,7 +7165,7 @@ struct bpf_fib_lookup {
 
 		/* output: MTU value */
 		__u16	mtu_result;
-	};
+	} __attribute__((packed, aligned(2)));
 	/* input: L3 device index for lookup
 	 * output: device index from FIB lookup
 	 */
@@ -7195,8 +7210,19 @@ struct bpf_fib_lookup {
 		__u32	tbid;
 	};
 
-	__u8	smac[6];     /* ETH_ALEN */
-	__u8	dmac[6];     /* ETH_ALEN */
+	union {
+		/* input */
+		struct {
+			__u32	mark;   /* policy routing */
+			/* 2 4-byte holes for input */
+		};
+
+		/* output: source and dest mac */
+		struct {
+			__u8	smac[6];	/* ETH_ALEN */
+			__u8	dmac[6];	/* ETH_ALEN */
+		};
+	};
 };
 
 struct bpf_redir_neigh {
@@ -7283,6 +7309,10 @@ struct bpf_timer {
 	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
+struct bpf_wq {
+	__u64 __opaque[2];
+} __attribute__((aligned(8)));
+
 struct bpf_dynptr {
 	__u64 __opaque[2];
 } __attribute__((aligned(8)));
diff --git a/tools/include/uapi/linux/ethtool.h b/tools/include/uapi/linux/ethtool.h
deleted file mode 100644
index 47afae3895ec..000000000000
--- a/tools/include/uapi/linux/ethtool.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * ethtool.h: Defines for Linux ethtool.
- *
- * Copyright (C) 1998 David S. Miller (davem@redhat.com)
- * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
- * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
- * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
- *                                christopher.leech@intel.com,
- *                                scott.feldman@intel.com)
- * Portions Copyright (C) Sun Microsystems 2008
- */
-
-#ifndef _UAPI_LINUX_ETHTOOL_H
-#define _UAPI_LINUX_ETHTOOL_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-#define ETHTOOL_GCHANNELS       0x0000003c /* Get no of channels */
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- *	support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
-	__u32	cmd;
-	__u32	max_rx;
-	__u32	max_tx;
-	__u32	max_other;
-	__u32	max_combined;
-	__u32	rx_count;
-	__u32	tx_count;
-	__u32	other_count;
-	__u32	combined_count;
-};
-
-#define ETHTOOL_FWVERS_LEN	32
-#define ETHTOOL_BUSINFO_LEN	32
-#define ETHTOOL_EROMVERS_LEN	32
-
-/**
- * struct ethtool_drvinfo - general driver and device information
- * @cmd: Command number = %ETHTOOL_GDRVINFO
- * @driver: Driver short name.  This should normally match the name
- *	in its bus driver structure (e.g. pci_driver::name).  Must
- *	not be an empty string.
- * @version: Driver version string; may be an empty string
- * @fw_version: Firmware version string; may be an empty string
- * @erom_version: Expansion ROM version string; may be an empty string
- * @bus_info: Device bus address.  This should match the dev_name()
- *	string for the underlying bus device, if there is one.  May be
- *	an empty string.
- * @reserved2: Reserved for future use; see the note on reserved space.
- * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
- *	%ETHTOOL_SPFLAGS commands; also the number of strings in the
- *	%ETH_SS_PRIV_FLAGS set
- * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS
- *	command; also the number of strings in the %ETH_SS_STATS set
- * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
- *	command; also the number of strings in the %ETH_SS_TEST set
- * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
- *	and %ETHTOOL_SEEPROM commands, in bytes
- * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
- *	command, in bytes
- *
- * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
- * strings in any string set (from Linux 2.6.34).
- *
- * Drivers should set at most @driver, @version, @fw_version and
- * @bus_info in their get_drvinfo() implementation.  The ethtool
- * core fills in the other fields using other driver operations.
- */
-struct ethtool_drvinfo {
-	__u32	cmd;
-	char	driver[32];
-	char	version[32];
-	char	fw_version[ETHTOOL_FWVERS_LEN];
-	char	bus_info[ETHTOOL_BUSINFO_LEN];
-	char	erom_version[ETHTOOL_EROMVERS_LEN];
-	char	reserved2[12];
-	__u32	n_priv_flags;
-	__u32	n_stats;
-	__u32	testinfo_len;
-	__u32	eedump_len;
-	__u32	regdump_len;
-};
-
-#define ETHTOOL_GDRVINFO	0x00000003
-
-#endif /* _UAPI_LINUX_ETHTOOL_H */
diff --git a/tools/include/uapi/linux/netdev.h b/tools/include/uapi/linux/netdev.h
index bb65ee840cda..a8188202413e 100644
--- a/tools/include/uapi/linux/netdev.h
+++ b/tools/include/uapi/linux/netdev.h
@@ -146,6 +146,27 @@ enum {
 	NETDEV_A_QSTATS_TX_PACKETS,
 	NETDEV_A_QSTATS_TX_BYTES,
 	NETDEV_A_QSTATS_RX_ALLOC_FAIL,
+	NETDEV_A_QSTATS_RX_HW_DROPS,
+	NETDEV_A_QSTATS_RX_HW_DROP_OVERRUNS,
+	NETDEV_A_QSTATS_RX_CSUM_UNNECESSARY,
+	NETDEV_A_QSTATS_RX_CSUM_NONE,
+	NETDEV_A_QSTATS_RX_CSUM_BAD,
+	NETDEV_A_QSTATS_RX_HW_GRO_PACKETS,
+	NETDEV_A_QSTATS_RX_HW_GRO_BYTES,
+	NETDEV_A_QSTATS_RX_HW_GRO_WIRE_PACKETS,
+	NETDEV_A_QSTATS_RX_HW_GRO_WIRE_BYTES,
+	NETDEV_A_QSTATS_RX_HW_DROP_RATELIMITS,
+	NETDEV_A_QSTATS_TX_HW_DROPS,
+	NETDEV_A_QSTATS_TX_HW_DROP_ERRORS,
+	NETDEV_A_QSTATS_TX_CSUM_NONE,
+	NETDEV_A_QSTATS_TX_NEEDS_CSUM,
+	NETDEV_A_QSTATS_TX_HW_GSO_PACKETS,
+	NETDEV_A_QSTATS_TX_HW_GSO_BYTES,
+	NETDEV_A_QSTATS_TX_HW_GSO_WIRE_PACKETS,
+	NETDEV_A_QSTATS_TX_HW_GSO_WIRE_BYTES,
+	NETDEV_A_QSTATS_TX_HW_DROP_RATELIMITS,
+	NETDEV_A_QSTATS_TX_STOP,
+	NETDEV_A_QSTATS_TX_WAKE,
 
 	__NETDEV_A_QSTATS_MAX,
 	NETDEV_A_QSTATS_MAX = (__NETDEV_A_QSTATS_MAX - 1)
diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index 97ec005c3c47..466a29d80124 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -766,6 +766,7 @@ int bpf_link_create(int prog_fd, int target_fd,
 			return libbpf_err(-EINVAL);
 		break;
 	case BPF_TRACE_KPROBE_MULTI:
+	case BPF_TRACE_KPROBE_SESSION:
 		attr.link_create.kprobe_multi.flags = OPTS_GET(opts, kprobe_multi.flags, 0);
 		attr.link_create.kprobe_multi.cnt = OPTS_GET(opts, kprobe_multi.cnt, 0);
 		attr.link_create.kprobe_multi.syms = ptr_to_u64(OPTS_GET(opts, kprobe_multi.syms, 0));
@@ -785,6 +786,7 @@ int bpf_link_create(int prog_fd, int target_fd,
 		if (!OPTS_ZEROED(opts, uprobe_multi))
 			return libbpf_err(-EINVAL);
 		break;
+	case BPF_TRACE_RAW_TP:
 	case BPF_TRACE_FENTRY:
 	case BPF_TRACE_FEXIT:
 	case BPF_MODIFY_RETURN:
@@ -1173,20 +1175,31 @@ int bpf_link_get_info_by_fd(int link_fd, struct bpf_link_info *info, __u32 *info
 	return bpf_obj_get_info_by_fd(link_fd, info, info_len);
 }
 
-int bpf_raw_tracepoint_open(const char *name, int prog_fd)
+int bpf_raw_tracepoint_open_opts(int prog_fd, struct bpf_raw_tp_opts *opts)
 {
 	const size_t attr_sz = offsetofend(union bpf_attr, raw_tracepoint);
 	union bpf_attr attr;
 	int fd;
 
+	if (!OPTS_VALID(opts, bpf_raw_tp_opts))
+		return libbpf_err(-EINVAL);
+
 	memset(&attr, 0, attr_sz);
-	attr.raw_tracepoint.name = ptr_to_u64(name);
 	attr.raw_tracepoint.prog_fd = prog_fd;
+	attr.raw_tracepoint.name = ptr_to_u64(OPTS_GET(opts, tp_name, NULL));
+	attr.raw_tracepoint.cookie = OPTS_GET(opts, cookie, 0);
 
 	fd = sys_bpf_fd(BPF_RAW_TRACEPOINT_OPEN, &attr, attr_sz);
 	return libbpf_err_errno(fd);
 }
 
+int bpf_raw_tracepoint_open(const char *name, int prog_fd)
+{
+	LIBBPF_OPTS(bpf_raw_tp_opts, opts, .tp_name = name);
+
+	return bpf_raw_tracepoint_open_opts(prog_fd, &opts);
+}
+
 int bpf_btf_load(const void *btf_data, size_t btf_size, struct bpf_btf_load_opts *opts)
 {
 	const size_t attr_sz = offsetofend(union bpf_attr, btf_token_fd);
diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index df0db2f0cdb7..972e17ec0c09 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -617,6 +617,15 @@ LIBBPF_API int bpf_prog_query(int target_fd, enum bpf_attach_type type,
 			      __u32 query_flags, __u32 *attach_flags,
 			      __u32 *prog_ids, __u32 *prog_cnt);
 
+struct bpf_raw_tp_opts {
+	size_t sz; /* size of this struct for forward/backward compatibility */
+	const char *tp_name;
+	__u64 cookie;
+	size_t :0;
+};
+#define bpf_raw_tp_opts__last_field cookie
+
+LIBBPF_API int bpf_raw_tracepoint_open_opts(int prog_fd, struct bpf_raw_tp_opts *opts);
 LIBBPF_API int bpf_raw_tracepoint_open(const char *name, int prog_fd);
 LIBBPF_API int bpf_task_fd_query(int pid, int fd, __u32 flags, char *buf,
 				 __u32 *buf_len, __u32 *prog_id, __u32 *fd_type,
diff --git a/tools/lib/bpf/bpf_core_read.h b/tools/lib/bpf/bpf_core_read.h
index 1ce738d91685..c0e13cdf9660 100644
--- a/tools/lib/bpf/bpf_core_read.h
+++ b/tools/lib/bpf/bpf_core_read.h
@@ -2,7 +2,7 @@
 #ifndef __BPF_CORE_READ_H__
 #define __BPF_CORE_READ_H__
 
-#include <bpf/bpf_helpers.h>
+#include "bpf_helpers.h"
 
 /*
  * enum bpf_field_info_kind is passed as a second argument into
@@ -104,6 +104,7 @@ enum bpf_enum_value_kind {
 	case 2: val = *(const unsigned short *)p; break;		      \
 	case 4: val = *(const unsigned int *)p; break;			      \
 	case 8: val = *(const unsigned long long *)p; break;		      \
+	default: val = 0; break;					      \
 	}								      \
 	val <<= __CORE_RELO(s, field, LSHIFT_U64);			      \
 	if (__CORE_RELO(s, field, SIGNED))				      \
diff --git a/tools/lib/bpf/bpf_helpers.h b/tools/lib/bpf/bpf_helpers.h
index cd17f6d0791f..305c62817dd3 100644
--- a/tools/lib/bpf/bpf_helpers.h
+++ b/tools/lib/bpf/bpf_helpers.h
@@ -137,7 +137,8 @@
 /*
  * Helper function to perform a tail call with a constant/immediate map slot.
  */
-#if __clang_major__ >= 8 && defined(__bpf__)
+#if (defined(__clang__) && __clang_major__ >= 8) || (!defined(__clang__) && __GNUC__ > 12)
+#if defined(__bpf__)
 static __always_inline void
 bpf_tail_call_static(void *ctx, const void *map, const __u32 slot)
 {
@@ -165,6 +166,7 @@ bpf_tail_call_static(void *ctx, const void *map, const __u32 slot)
 		     : "r0", "r1", "r2", "r3", "r4", "r5");
 }
 #endif
+#endif
 
 enum libbpf_pin_type {
 	LIBBPF_PIN_NONE,
@@ -184,10 +186,21 @@ enum libbpf_tristate {
 #define __kptr __attribute__((btf_type_tag("kptr")))
 #define __percpu_kptr __attribute__((btf_type_tag("percpu_kptr")))
 
-#define bpf_ksym_exists(sym) ({									\
-	_Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak");	\
-	!!sym;											\
+#if defined (__clang__)
+#define bpf_ksym_exists(sym) ({						\
+	_Static_assert(!__builtin_constant_p(!!sym),			\
+		       #sym " should be marked as __weak");		\
+	!!sym;								\
+})
+#elif __GNUC__ > 8
+#define bpf_ksym_exists(sym) ({						\
+	_Static_assert(__builtin_has_attribute (*sym, __weak__),	\
+		       #sym " should be marked as __weak");		\
+	!!sym;								\
 })
+#else
+#define bpf_ksym_exists(sym) !!sym
+#endif
 
 #define __arg_ctx __attribute__((btf_decl_tag("arg:ctx")))
 #define __arg_nonnull __attribute((btf_decl_tag("arg:nonnull")))
diff --git a/tools/lib/bpf/bpf_tracing.h b/tools/lib/bpf/bpf_tracing.h
index 1c13f8e88833..9314fa95f04e 100644
--- a/tools/lib/bpf/bpf_tracing.h
+++ b/tools/lib/bpf/bpf_tracing.h
@@ -633,18 +633,18 @@ struct pt_regs;
 #endif
 
 #define ___bpf_ctx_cast0()            ctx
-#define ___bpf_ctx_cast1(x)           ___bpf_ctx_cast0(), (void *)ctx[0]
-#define ___bpf_ctx_cast2(x, args...)  ___bpf_ctx_cast1(args), (void *)ctx[1]
-#define ___bpf_ctx_cast3(x, args...)  ___bpf_ctx_cast2(args), (void *)ctx[2]
-#define ___bpf_ctx_cast4(x, args...)  ___bpf_ctx_cast3(args), (void *)ctx[3]
-#define ___bpf_ctx_cast5(x, args...)  ___bpf_ctx_cast4(args), (void *)ctx[4]
-#define ___bpf_ctx_cast6(x, args...)  ___bpf_ctx_cast5(args), (void *)ctx[5]
-#define ___bpf_ctx_cast7(x, args...)  ___bpf_ctx_cast6(args), (void *)ctx[6]
-#define ___bpf_ctx_cast8(x, args...)  ___bpf_ctx_cast7(args), (void *)ctx[7]
-#define ___bpf_ctx_cast9(x, args...)  ___bpf_ctx_cast8(args), (void *)ctx[8]
-#define ___bpf_ctx_cast10(x, args...) ___bpf_ctx_cast9(args), (void *)ctx[9]
-#define ___bpf_ctx_cast11(x, args...) ___bpf_ctx_cast10(args), (void *)ctx[10]
-#define ___bpf_ctx_cast12(x, args...) ___bpf_ctx_cast11(args), (void *)ctx[11]
+#define ___bpf_ctx_cast1(x)           ___bpf_ctx_cast0(), ctx[0]
+#define ___bpf_ctx_cast2(x, args...)  ___bpf_ctx_cast1(args), ctx[1]
+#define ___bpf_ctx_cast3(x, args...)  ___bpf_ctx_cast2(args), ctx[2]
+#define ___bpf_ctx_cast4(x, args...)  ___bpf_ctx_cast3(args), ctx[3]
+#define ___bpf_ctx_cast5(x, args...)  ___bpf_ctx_cast4(args), ctx[4]
+#define ___bpf_ctx_cast6(x, args...)  ___bpf_ctx_cast5(args), ctx[5]
+#define ___bpf_ctx_cast7(x, args...)  ___bpf_ctx_cast6(args), ctx[6]
+#define ___bpf_ctx_cast8(x, args...)  ___bpf_ctx_cast7(args), ctx[7]
+#define ___bpf_ctx_cast9(x, args...)  ___bpf_ctx_cast8(args), ctx[8]
+#define ___bpf_ctx_cast10(x, args...) ___bpf_ctx_cast9(args), ctx[9]
+#define ___bpf_ctx_cast11(x, args...) ___bpf_ctx_cast10(args), ctx[10]
+#define ___bpf_ctx_cast12(x, args...) ___bpf_ctx_cast11(args), ctx[11]
 #define ___bpf_ctx_cast(args...)      ___bpf_apply(___bpf_ctx_cast, ___bpf_narg(args))(args)
 
 /*
@@ -786,14 +786,14 @@ ____##name(unsigned long long *ctx ___bpf_ctx_decl(args))
 struct pt_regs;
 
 #define ___bpf_kprobe_args0()           ctx
-#define ___bpf_kprobe_args1(x)          ___bpf_kprobe_args0(), (void *)PT_REGS_PARM1(ctx)
-#define ___bpf_kprobe_args2(x, args...) ___bpf_kprobe_args1(args), (void *)PT_REGS_PARM2(ctx)
-#define ___bpf_kprobe_args3(x, args...) ___bpf_kprobe_args2(args), (void *)PT_REGS_PARM3(ctx)
-#define ___bpf_kprobe_args4(x, args...) ___bpf_kprobe_args3(args), (void *)PT_REGS_PARM4(ctx)
-#define ___bpf_kprobe_args5(x, args...) ___bpf_kprobe_args4(args), (void *)PT_REGS_PARM5(ctx)
-#define ___bpf_kprobe_args6(x, args...) ___bpf_kprobe_args5(args), (void *)PT_REGS_PARM6(ctx)
-#define ___bpf_kprobe_args7(x, args...) ___bpf_kprobe_args6(args), (void *)PT_REGS_PARM7(ctx)
-#define ___bpf_kprobe_args8(x, args...) ___bpf_kprobe_args7(args), (void *)PT_REGS_PARM8(ctx)
+#define ___bpf_kprobe_args1(x)          ___bpf_kprobe_args0(), (unsigned long long)PT_REGS_PARM1(ctx)
+#define ___bpf_kprobe_args2(x, args...) ___bpf_kprobe_args1(args), (unsigned long long)PT_REGS_PARM2(ctx)
+#define ___bpf_kprobe_args3(x, args...) ___bpf_kprobe_args2(args), (unsigned long long)PT_REGS_PARM3(ctx)
+#define ___bpf_kprobe_args4(x, args...) ___bpf_kprobe_args3(args), (unsigned long long)PT_REGS_PARM4(ctx)
+#define ___bpf_kprobe_args5(x, args...) ___bpf_kprobe_args4(args), (unsigned long long)PT_REGS_PARM5(ctx)
+#define ___bpf_kprobe_args6(x, args...) ___bpf_kprobe_args5(args), (unsigned long long)PT_REGS_PARM6(ctx)
+#define ___bpf_kprobe_args7(x, args...) ___bpf_kprobe_args6(args), (unsigned long long)PT_REGS_PARM7(ctx)
+#define ___bpf_kprobe_args8(x, args...) ___bpf_kprobe_args7(args), (unsigned long long)PT_REGS_PARM8(ctx)
 #define ___bpf_kprobe_args(args...)     ___bpf_apply(___bpf_kprobe_args, ___bpf_narg(args))(args)
 
 /*
@@ -821,7 +821,7 @@ static __always_inline typeof(name(0))					    \
 ____##name(struct pt_regs *ctx, ##args)
 
 #define ___bpf_kretprobe_args0()       ctx
-#define ___bpf_kretprobe_args1(x)      ___bpf_kretprobe_args0(), (void *)PT_REGS_RC(ctx)
+#define ___bpf_kretprobe_args1(x)      ___bpf_kretprobe_args0(), (unsigned long long)PT_REGS_RC(ctx)
 #define ___bpf_kretprobe_args(args...) ___bpf_apply(___bpf_kretprobe_args, ___bpf_narg(args))(args)
 
 /*
@@ -845,24 +845,24 @@ static __always_inline typeof(name(0)) ____##name(struct pt_regs *ctx, ##args)
 
 /* If kernel has CONFIG_ARCH_HAS_SYSCALL_WRAPPER, read pt_regs directly */
 #define ___bpf_syscall_args0()           ctx
-#define ___bpf_syscall_args1(x)          ___bpf_syscall_args0(), (void *)PT_REGS_PARM1_SYSCALL(regs)
-#define ___bpf_syscall_args2(x, args...) ___bpf_syscall_args1(args), (void *)PT_REGS_PARM2_SYSCALL(regs)
-#define ___bpf_syscall_args3(x, args...) ___bpf_syscall_args2(args), (void *)PT_REGS_PARM3_SYSCALL(regs)
-#define ___bpf_syscall_args4(x, args...) ___bpf_syscall_args3(args), (void *)PT_REGS_PARM4_SYSCALL(regs)
-#define ___bpf_syscall_args5(x, args...) ___bpf_syscall_args4(args), (void *)PT_REGS_PARM5_SYSCALL(regs)
-#define ___bpf_syscall_args6(x, args...) ___bpf_syscall_args5(args), (void *)PT_REGS_PARM6_SYSCALL(regs)
-#define ___bpf_syscall_args7(x, args...) ___bpf_syscall_args6(args), (void *)PT_REGS_PARM7_SYSCALL(regs)
+#define ___bpf_syscall_args1(x)          ___bpf_syscall_args0(), (unsigned long long)PT_REGS_PARM1_SYSCALL(regs)
+#define ___bpf_syscall_args2(x, args...) ___bpf_syscall_args1(args), (unsigned long long)PT_REGS_PARM2_SYSCALL(regs)
+#define ___bpf_syscall_args3(x, args...) ___bpf_syscall_args2(args), (unsigned long long)PT_REGS_PARM3_SYSCALL(regs)
+#define ___bpf_syscall_args4(x, args...) ___bpf_syscall_args3(args), (unsigned long long)PT_REGS_PARM4_SYSCALL(regs)
+#define ___bpf_syscall_args5(x, args...) ___bpf_syscall_args4(args), (unsigned long long)PT_REGS_PARM5_SYSCALL(regs)
+#define ___bpf_syscall_args6(x, args...) ___bpf_syscall_args5(args), (unsigned long long)PT_REGS_PARM6_SYSCALL(regs)
+#define ___bpf_syscall_args7(x, args...) ___bpf_syscall_args6(args), (unsigned long long)PT_REGS_PARM7_SYSCALL(regs)
 #define ___bpf_syscall_args(args...)     ___bpf_apply(___bpf_syscall_args, ___bpf_narg(args))(args)
 
 /* If kernel doesn't have CONFIG_ARCH_HAS_SYSCALL_WRAPPER, we have to BPF_CORE_READ from pt_regs */
 #define ___bpf_syswrap_args0()           ctx
-#define ___bpf_syswrap_args1(x)          ___bpf_syswrap_args0(), (void *)PT_REGS_PARM1_CORE_SYSCALL(regs)
-#define ___bpf_syswrap_args2(x, args...) ___bpf_syswrap_args1(args), (void *)PT_REGS_PARM2_CORE_SYSCALL(regs)
-#define ___bpf_syswrap_args3(x, args...) ___bpf_syswrap_args2(args), (void *)PT_REGS_PARM3_CORE_SYSCALL(regs)
-#define ___bpf_syswrap_args4(x, args...) ___bpf_syswrap_args3(args), (void *)PT_REGS_PARM4_CORE_SYSCALL(regs)
-#define ___bpf_syswrap_args5(x, args...) ___bpf_syswrap_args4(args), (void *)PT_REGS_PARM5_CORE_SYSCALL(regs)
-#define ___bpf_syswrap_args6(x, args...) ___bpf_syswrap_args5(args), (void *)PT_REGS_PARM6_CORE_SYSCALL(regs)
-#define ___bpf_syswrap_args7(x, args...) ___bpf_syswrap_args6(args), (void *)PT_REGS_PARM7_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args1(x)          ___bpf_syswrap_args0(), (unsigned long long)PT_REGS_PARM1_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args2(x, args...) ___bpf_syswrap_args1(args), (unsigned long long)PT_REGS_PARM2_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args3(x, args...) ___bpf_syswrap_args2(args), (unsigned long long)PT_REGS_PARM3_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args4(x, args...) ___bpf_syswrap_args3(args), (unsigned long long)PT_REGS_PARM4_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args5(x, args...) ___bpf_syswrap_args4(args), (unsigned long long)PT_REGS_PARM5_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args6(x, args...) ___bpf_syswrap_args5(args), (unsigned long long)PT_REGS_PARM6_CORE_SYSCALL(regs)
+#define ___bpf_syswrap_args7(x, args...) ___bpf_syswrap_args6(args), (unsigned long long)PT_REGS_PARM7_CORE_SYSCALL(regs)
 #define ___bpf_syswrap_args(args...)     ___bpf_apply(___bpf_syswrap_args, ___bpf_narg(args))(args)
 
 /*
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 4d9f30bf7f01..5dbca76b953f 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1929,6 +1929,7 @@ static int btf_dump_int_data(struct btf_dump *d,
 			if (d->typed_dump->is_array_terminated)
 				break;
 			if (*(char *)data == '\0') {
+				btf_dump_type_values(d, "'\\0'");
 				d->typed_dump->is_array_terminated = true;
 				break;
 			}
@@ -2031,6 +2032,7 @@ static int btf_dump_array_data(struct btf_dump *d,
 	__u32 i, elem_type_id;
 	__s64 elem_size;
 	bool is_array_member;
+	bool is_array_terminated;
 
 	elem_type_id = array->type;
 	elem_type = skip_mods_and_typedefs(d->btf, elem_type_id, NULL);
@@ -2066,12 +2068,15 @@ static int btf_dump_array_data(struct btf_dump *d,
 	 */
 	is_array_member = d->typed_dump->is_array_member;
 	d->typed_dump->is_array_member = true;
+	is_array_terminated = d->typed_dump->is_array_terminated;
+	d->typed_dump->is_array_terminated = false;
 	for (i = 0; i < array->nelems; i++, data += elem_size) {
 		if (d->typed_dump->is_array_terminated)
 			break;
 		btf_dump_dump_type_data(d, NULL, elem_type, elem_type_id, data, 0, 0);
 	}
 	d->typed_dump->is_array_member = is_array_member;
+	d->typed_dump->is_array_terminated = is_array_terminated;
 	d->typed_dump->depth--;
 	btf_dump_data_pfx(d);
 	btf_dump_type_values(d, "]");
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index a2061fcd612d..5401f2df463d 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -132,6 +132,7 @@ static const char * const attach_type_name[] = {
 	[BPF_TRACE_UPROBE_MULTI]	= "trace_uprobe_multi",
 	[BPF_NETKIT_PRIMARY]		= "netkit_primary",
 	[BPF_NETKIT_PEER]		= "netkit_peer",
+	[BPF_TRACE_KPROBE_SESSION]	= "trace_kprobe_session",
 };
 
 static const char * const link_type_name[] = {
@@ -149,6 +150,7 @@ static const char * const link_type_name[] = {
 	[BPF_LINK_TYPE_TCX]			= "tcx",
 	[BPF_LINK_TYPE_UPROBE_MULTI]		= "uprobe_multi",
 	[BPF_LINK_TYPE_NETKIT]			= "netkit",
+	[BPF_LINK_TYPE_SOCKMAP]			= "sockmap",
 };
 
 static const char * const map_type_name[] = {
@@ -1126,17 +1128,46 @@ static int bpf_map__init_kern_struct_ops(struct bpf_map *map)
 		const struct btf_type *mtype, *kern_mtype;
 		__u32 mtype_id, kern_mtype_id;
 		void *mdata, *kern_mdata;
+		struct bpf_program *prog;
 		__s64 msize, kern_msize;
 		__u32 moff, kern_moff;
 		__u32 kern_member_idx;
 		const char *mname;
 
 		mname = btf__name_by_offset(btf, member->name_off);
+		moff = member->offset / 8;
+		mdata = data + moff;
+		msize = btf__resolve_size(btf, member->type);
+		if (msize < 0) {
+			pr_warn("struct_ops init_kern %s: failed to resolve the size of member %s\n",
+				map->name, mname);
+			return msize;
+		}
+
 		kern_member = find_member_by_name(kern_btf, kern_type, mname);
 		if (!kern_member) {
-			pr_warn("struct_ops init_kern %s: Cannot find member %s in kernel BTF\n",
+			if (!libbpf_is_mem_zeroed(mdata, msize)) {
+				pr_warn("struct_ops init_kern %s: Cannot find member %s in kernel BTF\n",
+					map->name, mname);
+				return -ENOTSUP;
+			}
+
+			if (st_ops->progs[i]) {
+				/* If we had declaratively set struct_ops callback, we need to
+				 * force its autoload to false, because it doesn't have
+				 * a chance of succeeding from POV of the current struct_ops map.
+				 * If this program is still referenced somewhere else, though,
+				 * then bpf_object_adjust_struct_ops_autoload() will update its
+				 * autoload accordingly.
+				 */
+				st_ops->progs[i]->autoload = false;
+				st_ops->progs[i] = NULL;
+			}
+
+			/* Skip all-zero/NULL fields if they are not present in the kernel BTF */
+			pr_info("struct_ops %s: member %s not found in kernel, skipping it as it's set to zero\n",
 				map->name, mname);
-			return -ENOTSUP;
+			continue;
 		}
 
 		kern_member_idx = kern_member - btf_members(kern_type);
@@ -1147,10 +1178,7 @@ static int bpf_map__init_kern_struct_ops(struct bpf_map *map)
 			return -ENOTSUP;
 		}
 
-		moff = member->offset / 8;
 		kern_moff = kern_member->offset / 8;
-
-		mdata = data + moff;
 		kern_mdata = kern_data + kern_moff;
 
 		mtype = skip_mods_and_typedefs(btf, member->type, &mtype_id);
@@ -1165,13 +1193,19 @@ static int bpf_map__init_kern_struct_ops(struct bpf_map *map)
 		}
 
 		if (btf_is_ptr(mtype)) {
-			struct bpf_program *prog;
+			prog = *(void **)mdata;
+			/* just like for !kern_member case above, reset declaratively
+			 * set (at compile time) program's autload to false,
+			 * if user replaced it with another program or NULL
+			 */
+			if (st_ops->progs[i] && st_ops->progs[i] != prog)
+				st_ops->progs[i]->autoload = false;
 
 			/* Update the value from the shadow type */
-			prog = *(void **)mdata;
 			st_ops->progs[i] = prog;
 			if (!prog)
 				continue;
+
 			if (!is_valid_st_ops_program(obj, prog)) {
 				pr_warn("struct_ops init_kern %s: member %s is not a struct_ops program\n",
 					map->name, mname);
@@ -1230,9 +1264,8 @@ static int bpf_map__init_kern_struct_ops(struct bpf_map *map)
 			continue;
 		}
 
-		msize = btf__resolve_size(btf, mtype_id);
 		kern_msize = btf__resolve_size(kern_btf, kern_mtype_id);
-		if (msize < 0 || kern_msize < 0 || msize != kern_msize) {
+		if (kern_msize < 0 || msize != kern_msize) {
 			pr_warn("struct_ops init_kern %s: Error in size of member %s: %zd != %zd(kernel)\n",
 				map->name, mname, (ssize_t)msize,
 				(ssize_t)kern_msize);
@@ -1956,6 +1989,20 @@ static struct extern_desc *find_extern_by_name(const struct bpf_object *obj,
 	return NULL;
 }
 
+static struct extern_desc *find_extern_by_name_with_len(const struct bpf_object *obj,
+							const void *name, int len)
+{
+	const char *ext_name;
+	int i;
+
+	for (i = 0; i < obj->nr_extern; i++) {
+		ext_name = obj->externs[i].name;
+		if (strlen(ext_name) == len && strncmp(ext_name, name, len) == 0)
+			return &obj->externs[i];
+	}
+	return NULL;
+}
+
 static int set_kcfg_value_tri(struct extern_desc *ext, void *ext_val,
 			      char value)
 {
@@ -7321,11 +7368,15 @@ static int bpf_object_load_prog(struct bpf_object *obj, struct bpf_program *prog
 	char *cp, errmsg[STRERR_BUFSIZE];
 	size_t log_buf_size = 0;
 	char *log_buf = NULL, *tmp;
-	int btf_fd, ret, err;
 	bool own_log_buf = true;
 	__u32 log_level = prog->log_level;
+	int ret, err;
 
-	if (prog->type == BPF_PROG_TYPE_UNSPEC) {
+	/* Be more helpful by rejecting programs that can't be validated early
+	 * with more meaningful and actionable error message.
+	 */
+	switch (prog->type) {
+	case BPF_PROG_TYPE_UNSPEC:
 		/*
 		 * The program type must be set.  Most likely we couldn't find a proper
 		 * section definition at load time, and thus we didn't infer the type.
@@ -7333,6 +7384,15 @@ static int bpf_object_load_prog(struct bpf_object *obj, struct bpf_program *prog
 		pr_warn("prog '%s': missing BPF prog type, check ELF section name '%s'\n",
 			prog->name, prog->sec_name);
 		return -EINVAL;
+	case BPF_PROG_TYPE_STRUCT_OPS:
+		if (prog->attach_btf_id == 0) {
+			pr_warn("prog '%s': SEC(\"struct_ops\") program isn't referenced anywhere, did you forget to use it?\n",
+				prog->name);
+			return -EINVAL;
+		}
+		break;
+	default:
+		break;
 	}
 
 	if (!insns || !insns_cnt)
@@ -7347,9 +7407,8 @@ static int bpf_object_load_prog(struct bpf_object *obj, struct bpf_program *prog
 	load_attr.prog_ifindex = prog->prog_ifindex;
 
 	/* specify func_info/line_info only if kernel supports them */
-	btf_fd = btf__fd(obj->btf);
-	if (btf_fd >= 0 && kernel_supports(obj, FEAT_BTF_FUNC)) {
-		load_attr.prog_btf_fd = btf_fd;
+	if (obj->btf && btf__fd(obj->btf) >= 0 && kernel_supports(obj, FEAT_BTF_FUNC)) {
+		load_attr.prog_btf_fd = btf__fd(obj->btf);
 		load_attr.func_info = prog->func_info;
 		load_attr.func_info_rec_size = prog->func_info_rec_size;
 		load_attr.func_info_cnt = prog->func_info_cnt;
@@ -7973,7 +8032,10 @@ static int bpf_object__sanitize_maps(struct bpf_object *obj)
 	return 0;
 }
 
-int libbpf_kallsyms_parse(kallsyms_cb_t cb, void *ctx)
+typedef int (*kallsyms_cb_t)(unsigned long long sym_addr, char sym_type,
+			     const char *sym_name, void *ctx);
+
+static int libbpf_kallsyms_parse(kallsyms_cb_t cb, void *ctx)
 {
 	char sym_type, sym_name[500];
 	unsigned long long sym_addr;
@@ -8013,8 +8075,13 @@ static int kallsyms_cb(unsigned long long sym_addr, char sym_type,
 	struct bpf_object *obj = ctx;
 	const struct btf_type *t;
 	struct extern_desc *ext;
+	char *res;
 
-	ext = find_extern_by_name(obj, sym_name);
+	res = strstr(sym_name, ".llvm.");
+	if (sym_type == 'd' && res)
+		ext = find_extern_by_name_with_len(obj, sym_name, res - sym_name);
+	else
+		ext = find_extern_by_name(obj, sym_name);
 	if (!ext || ext->type != EXT_KSYM)
 		return 0;
 
@@ -8563,6 +8630,11 @@ int bpf_map__pin(struct bpf_map *map, const char *path)
 		return libbpf_err(-EINVAL);
 	}
 
+	if (map->fd < 0) {
+		pr_warn("map '%s': can't pin BPF map without FD (was it created?)\n", map->name);
+		return libbpf_err(-EINVAL);
+	}
+
 	if (map->pin_path) {
 		if (path && strcmp(path, map->pin_path)) {
 			pr_warn("map '%s' already has pin path '%s' different from '%s'\n",
@@ -9231,6 +9303,7 @@ static int attach_tp(const struct bpf_program *prog, long cookie, struct bpf_lin
 static int attach_raw_tp(const struct bpf_program *prog, long cookie, struct bpf_link **link);
 static int attach_trace(const struct bpf_program *prog, long cookie, struct bpf_link **link);
 static int attach_kprobe_multi(const struct bpf_program *prog, long cookie, struct bpf_link **link);
+static int attach_kprobe_session(const struct bpf_program *prog, long cookie, struct bpf_link **link);
 static int attach_uprobe_multi(const struct bpf_program *prog, long cookie, struct bpf_link **link);
 static int attach_lsm(const struct bpf_program *prog, long cookie, struct bpf_link **link);
 static int attach_iter(const struct bpf_program *prog, long cookie, struct bpf_link **link);
@@ -9247,6 +9320,7 @@ static const struct bpf_sec_def section_defs[] = {
 	SEC_DEF("uretprobe.s+",		KPROBE, 0, SEC_SLEEPABLE, attach_uprobe),
 	SEC_DEF("kprobe.multi+",	KPROBE,	BPF_TRACE_KPROBE_MULTI, SEC_NONE, attach_kprobe_multi),
 	SEC_DEF("kretprobe.multi+",	KPROBE,	BPF_TRACE_KPROBE_MULTI, SEC_NONE, attach_kprobe_multi),
+	SEC_DEF("kprobe.session+",	KPROBE,	BPF_TRACE_KPROBE_SESSION, SEC_NONE, attach_kprobe_session),
 	SEC_DEF("uprobe.multi+",	KPROBE,	BPF_TRACE_UPROBE_MULTI, SEC_NONE, attach_uprobe_multi),
 	SEC_DEF("uretprobe.multi+",	KPROBE,	BPF_TRACE_UPROBE_MULTI, SEC_NONE, attach_uprobe_multi),
 	SEC_DEF("uprobe.multi.s+",	KPROBE,	BPF_TRACE_UPROBE_MULTI, SEC_SLEEPABLE, attach_uprobe_multi),
@@ -9298,6 +9372,7 @@ static const struct bpf_sec_def section_defs[] = {
 	SEC_DEF("sockops",		SOCK_OPS, BPF_CGROUP_SOCK_OPS, SEC_ATTACHABLE_OPT),
 	SEC_DEF("sk_skb/stream_parser",	SK_SKB, BPF_SK_SKB_STREAM_PARSER, SEC_ATTACHABLE_OPT),
 	SEC_DEF("sk_skb/stream_verdict",SK_SKB, BPF_SK_SKB_STREAM_VERDICT, SEC_ATTACHABLE_OPT),
+	SEC_DEF("sk_skb/verdict",	SK_SKB, BPF_SK_SKB_VERDICT, SEC_ATTACHABLE_OPT),
 	SEC_DEF("sk_skb",		SK_SKB, 0, SEC_NONE),
 	SEC_DEF("sk_msg",		SK_MSG, BPF_SK_MSG_VERDICT, SEC_ATTACHABLE_OPT),
 	SEC_DEF("lirc_mode2",		LIRC_MODE2, BPF_LIRC_MODE2, SEC_ATTACHABLE_OPT),
@@ -9816,16 +9891,28 @@ static int find_kernel_btf_id(struct bpf_object *obj, const char *attach_name,
 			      enum bpf_attach_type attach_type,
 			      int *btf_obj_fd, int *btf_type_id)
 {
-	int ret, i;
+	int ret, i, mod_len;
+	const char *fn_name, *mod_name = NULL;
 
-	ret = find_attach_btf_id(obj->btf_vmlinux, attach_name, attach_type);
-	if (ret > 0) {
-		*btf_obj_fd = 0; /* vmlinux BTF */
-		*btf_type_id = ret;
-		return 0;
+	fn_name = strchr(attach_name, ':');
+	if (fn_name) {
+		mod_name = attach_name;
+		mod_len = fn_name - mod_name;
+		fn_name++;
+	}
+
+	if (!mod_name || strncmp(mod_name, "vmlinux", mod_len) == 0) {
+		ret = find_attach_btf_id(obj->btf_vmlinux,
+					 mod_name ? fn_name : attach_name,
+					 attach_type);
+		if (ret > 0) {
+			*btf_obj_fd = 0; /* vmlinux BTF */
+			*btf_type_id = ret;
+			return 0;
+		}
+		if (ret != -ENOENT)
+			return ret;
 	}
-	if (ret != -ENOENT)
-		return ret;
 
 	ret = load_module_btfs(obj);
 	if (ret)
@@ -9834,7 +9921,12 @@ static int find_kernel_btf_id(struct bpf_object *obj, const char *attach_name,
 	for (i = 0; i < obj->btf_module_cnt; i++) {
 		const struct module_btf *mod = &obj->btf_modules[i];
 
-		ret = find_attach_btf_id(mod->btf, attach_name, attach_type);
+		if (mod_name && strncmp(mod->name, mod_name, mod_len) != 0)
+			continue;
+
+		ret = find_attach_btf_id(mod->btf,
+					 mod_name ? fn_name : attach_name,
+					 attach_type);
 		if (ret > 0) {
 			*btf_obj_fd = mod->fd;
 			*btf_type_id = ret;
@@ -10307,6 +10399,11 @@ static int validate_map_op(const struct bpf_map *map, size_t key_sz,
 		return -EINVAL;
 	}
 
+	if (map->fd < 0) {
+		pr_warn("map '%s': can't use BPF map without FD (was it created?)\n", map->name);
+		return -EINVAL;
+	}
+
 	if (!check_value_sz)
 		return 0;
 
@@ -10419,8 +10516,15 @@ long libbpf_get_error(const void *ptr)
 int bpf_link__update_program(struct bpf_link *link, struct bpf_program *prog)
 {
 	int ret;
+	int prog_fd = bpf_program__fd(prog);
+
+	if (prog_fd < 0) {
+		pr_warn("prog '%s': can't use BPF program without FD (was it loaded?)\n",
+			prog->name);
+		return libbpf_err(-EINVAL);
+	}
 
-	ret = bpf_link_update(bpf_link__fd(link), bpf_program__fd(prog), NULL);
+	ret = bpf_link_update(bpf_link__fd(link), prog_fd, NULL);
 	return libbpf_err_errno(ret);
 }
 
@@ -10614,7 +10718,7 @@ struct bpf_link *bpf_program__attach_perf_event_opts(const struct bpf_program *p
 	}
 	prog_fd = bpf_program__fd(prog);
 	if (prog_fd < 0) {
-		pr_warn("prog '%s': can't attach BPF program w/o FD (did you load it?)\n",
+		pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",
 			prog->name);
 		return libbpf_err_ptr(-EINVAL);
 	}
@@ -11326,18 +11430,26 @@ bpf_program__attach_kprobe_multi_opts(const struct bpf_program *prog,
 	struct kprobe_multi_resolve res = {
 		.pattern = pattern,
 	};
+	enum bpf_attach_type attach_type;
 	struct bpf_link *link = NULL;
 	char errmsg[STRERR_BUFSIZE];
 	const unsigned long *addrs;
 	int err, link_fd, prog_fd;
+	bool retprobe, session;
 	const __u64 *cookies;
 	const char **syms;
-	bool retprobe;
 	size_t cnt;
 
 	if (!OPTS_VALID(opts, bpf_kprobe_multi_opts))
 		return libbpf_err_ptr(-EINVAL);
 
+	prog_fd = bpf_program__fd(prog);
+	if (prog_fd < 0) {
+		pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",
+			prog->name);
+		return libbpf_err_ptr(-EINVAL);
+	}
+
 	syms    = OPTS_GET(opts, syms, false);
 	addrs   = OPTS_GET(opts, addrs, false);
 	cnt     = OPTS_GET(opts, cnt, false);
@@ -11364,6 +11476,12 @@ bpf_program__attach_kprobe_multi_opts(const struct bpf_program *prog,
 	}
 
 	retprobe = OPTS_GET(opts, retprobe, false);
+	session  = OPTS_GET(opts, session, false);
+
+	if (retprobe && session)
+		return libbpf_err_ptr(-EINVAL);
+
+	attach_type = session ? BPF_TRACE_KPROBE_SESSION : BPF_TRACE_KPROBE_MULTI;
 
 	lopts.kprobe_multi.syms = syms;
 	lopts.kprobe_multi.addrs = addrs;
@@ -11378,8 +11496,7 @@ bpf_program__attach_kprobe_multi_opts(const struct bpf_program *prog,
 	}
 	link->detach = &bpf_link__detach_fd;
 
-	prog_fd = bpf_program__fd(prog);
-	link_fd = bpf_link_create(prog_fd, 0, BPF_TRACE_KPROBE_MULTI, &lopts);
+	link_fd = bpf_link_create(prog_fd, 0, attach_type, &lopts);
 	if (link_fd < 0) {
 		err = -errno;
 		pr_warn("prog '%s': failed to attach: %s\n",
@@ -11476,7 +11593,7 @@ static int attach_kprobe_multi(const struct bpf_program *prog, long cookie, stru
 
 	n = sscanf(spec, "%m[a-zA-Z0-9_.*?]", &pattern);
 	if (n < 1) {
-		pr_warn("kprobe multi pattern is invalid: %s\n", pattern);
+		pr_warn("kprobe multi pattern is invalid: %s\n", spec);
 		return -EINVAL;
 	}
 
@@ -11485,6 +11602,32 @@ static int attach_kprobe_multi(const struct bpf_program *prog, long cookie, stru
 	return libbpf_get_error(*link);
 }
 
+static int attach_kprobe_session(const struct bpf_program *prog, long cookie,
+				 struct bpf_link **link)
+{
+	LIBBPF_OPTS(bpf_kprobe_multi_opts, opts, .session = true);
+	const char *spec;
+	char *pattern;
+	int n;
+
+	*link = NULL;
+
+	/* no auto-attach for SEC("kprobe.session") */
+	if (strcmp(prog->sec_name, "kprobe.session") == 0)
+		return 0;
+
+	spec = prog->sec_name + sizeof("kprobe.session/") - 1;
+	n = sscanf(spec, "%m[a-zA-Z0-9_.*?]", &pattern);
+	if (n < 1) {
+		pr_warn("kprobe session pattern is invalid: %s\n", spec);
+		return -EINVAL;
+	}
+
+	*link = bpf_program__attach_kprobe_multi_opts(prog, pattern, &opts);
+	free(pattern);
+	return *link ? 0 : -errno;
+}
+
 static int attach_uprobe_multi(const struct bpf_program *prog, long cookie, struct bpf_link **link)
 {
 	char *probe_type = NULL, *binary_path = NULL, *func_name = NULL;
@@ -11761,6 +11904,13 @@ bpf_program__attach_uprobe_multi(const struct bpf_program *prog,
 	if (!OPTS_VALID(opts, bpf_uprobe_multi_opts))
 		return libbpf_err_ptr(-EINVAL);
 
+	prog_fd = bpf_program__fd(prog);
+	if (prog_fd < 0) {
+		pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",
+			prog->name);
+		return libbpf_err_ptr(-EINVAL);
+	}
+
 	syms = OPTS_GET(opts, syms, NULL);
 	offsets = OPTS_GET(opts, offsets, NULL);
 	ref_ctr_offsets = OPTS_GET(opts, ref_ctr_offsets, NULL);
@@ -11836,7 +11986,6 @@ bpf_program__attach_uprobe_multi(const struct bpf_program *prog,
 	}
 	link->detach = &bpf_link__detach_fd;
 
-	prog_fd = bpf_program__fd(prog);
 	link_fd = bpf_link_create(prog_fd, 0, BPF_TRACE_UPROBE_MULTI, &lopts);
 	if (link_fd < 0) {
 		err = -errno;
@@ -12080,7 +12229,7 @@ struct bpf_link *bpf_program__attach_usdt(const struct bpf_program *prog,
 		return libbpf_err_ptr(-EINVAL);
 
 	if (bpf_program__fd(prog) < 0) {
-		pr_warn("prog '%s': can't attach BPF program w/o FD (did you load it?)\n",
+		pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",
 			prog->name);
 		return libbpf_err_ptr(-EINVAL);
 	}
@@ -12271,13 +12420,19 @@ static int attach_tp(const struct bpf_program *prog, long cookie, struct bpf_lin
 	return libbpf_get_error(*link);
 }
 
-struct bpf_link *bpf_program__attach_raw_tracepoint(const struct bpf_program *prog,
-						    const char *tp_name)
+struct bpf_link *
+bpf_program__attach_raw_tracepoint_opts(const struct bpf_program *prog,
+					const char *tp_name,
+					struct bpf_raw_tracepoint_opts *opts)
 {
+	LIBBPF_OPTS(bpf_raw_tp_opts, raw_opts);
 	char errmsg[STRERR_BUFSIZE];
 	struct bpf_link *link;
 	int prog_fd, pfd;
 
+	if (!OPTS_VALID(opts, bpf_raw_tracepoint_opts))
+		return libbpf_err_ptr(-EINVAL);
+
 	prog_fd = bpf_program__fd(prog);
 	if (prog_fd < 0) {
 		pr_warn("prog '%s': can't attach before loaded\n", prog->name);
@@ -12289,7 +12444,9 @@ struct bpf_link *bpf_program__attach_raw_tracepoint(const struct bpf_program *pr
 		return libbpf_err_ptr(-ENOMEM);
 	link->detach = &bpf_link__detach_fd;
 
-	pfd = bpf_raw_tracepoint_open(tp_name, prog_fd);
+	raw_opts.tp_name = tp_name;
+	raw_opts.cookie = OPTS_GET(opts, cookie, 0);
+	pfd = bpf_raw_tracepoint_open_opts(prog_fd, &raw_opts);
 	if (pfd < 0) {
 		pfd = -errno;
 		free(link);
@@ -12301,6 +12458,12 @@ struct bpf_link *bpf_program__attach_raw_tracepoint(const struct bpf_program *pr
 	return link;
 }
 
+struct bpf_link *bpf_program__attach_raw_tracepoint(const struct bpf_program *prog,
+						    const char *tp_name)
+{
+	return bpf_program__attach_raw_tracepoint_opts(prog, tp_name, NULL);
+}
+
 static int attach_raw_tp(const struct bpf_program *prog, long cookie, struct bpf_link **link)
 {
 	static const char *const prefixes[] = {
@@ -12454,6 +12617,12 @@ bpf_program__attach_netns(const struct bpf_program *prog, int netns_fd)
 	return bpf_program_attach_fd(prog, netns_fd, "netns", NULL);
 }
 
+struct bpf_link *
+bpf_program__attach_sockmap(const struct bpf_program *prog, int map_fd)
+{
+	return bpf_program_attach_fd(prog, map_fd, "sockmap", NULL);
+}
+
 struct bpf_link *bpf_program__attach_xdp(const struct bpf_program *prog, int ifindex)
 {
 	/* target_fd/target_ifindex use the same field in LINK_CREATE */
@@ -12662,6 +12831,12 @@ struct bpf_link *bpf_program__attach(const struct bpf_program *prog)
 	if (!prog->sec_def || !prog->sec_def->prog_attach_fn)
 		return libbpf_err_ptr(-EOPNOTSUPP);
 
+	if (bpf_program__fd(prog) < 0) {
+		pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",
+			prog->name);
+		return libbpf_err_ptr(-EINVAL);
+	}
+
 	err = prog->sec_def->prog_attach_fn(prog, prog->sec_def->cookie, &link);
 	if (err)
 		return libbpf_err_ptr(err);
@@ -12702,8 +12877,13 @@ struct bpf_link *bpf_map__attach_struct_ops(const struct bpf_map *map)
 	__u32 zero = 0;
 	int err, fd;
 
-	if (!bpf_map__is_struct_ops(map) || map->fd == -1)
+	if (!bpf_map__is_struct_ops(map))
+		return libbpf_err_ptr(-EINVAL);
+
+	if (map->fd < 0) {
+		pr_warn("map '%s': can't attach BPF map without FD (was it created?)\n", map->name);
 		return libbpf_err_ptr(-EINVAL);
+	}
 
 	link = calloc(1, sizeof(*link));
 	if (!link)
@@ -12751,9 +12931,14 @@ int bpf_link__update_map(struct bpf_link *link, const struct bpf_map *map)
 	__u32 zero = 0;
 	int err;
 
-	if (!bpf_map__is_struct_ops(map) || !map_is_created(map))
+	if (!bpf_map__is_struct_ops(map))
 		return -EINVAL;
 
+	if (map->fd < 0) {
+		pr_warn("map '%s': can't use BPF map without FD (was it created?)\n", map->name);
+		return -EINVAL;
+	}
+
 	st_ops_link = container_of(link, struct bpf_link_struct_ops, link);
 	/* Ensure the type of a link is correct */
 	if (st_ops_link->map_fd < 0)
diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h
index 7b510761f545..c3f77d9260fe 100644
--- a/tools/lib/bpf/libbpf.h
+++ b/tools/lib/bpf/libbpf.h
@@ -539,10 +539,12 @@ struct bpf_kprobe_multi_opts {
 	size_t cnt;
 	/* create return kprobes */
 	bool retprobe;
+	/* create session kprobes */
+	bool session;
 	size_t :0;
 };
 
-#define bpf_kprobe_multi_opts__last_field retprobe
+#define bpf_kprobe_multi_opts__last_field session
 
 LIBBPF_API struct bpf_link *
 bpf_program__attach_kprobe_multi_opts(const struct bpf_program *prog,
@@ -760,9 +762,20 @@ bpf_program__attach_tracepoint_opts(const struct bpf_program *prog,
 				    const char *tp_name,
 				    const struct bpf_tracepoint_opts *opts);
 
+struct bpf_raw_tracepoint_opts {
+	size_t sz; /* size of this struct for forward/backward compatibility */
+	__u64 cookie;
+	size_t :0;
+};
+#define bpf_raw_tracepoint_opts__last_field cookie
+
 LIBBPF_API struct bpf_link *
 bpf_program__attach_raw_tracepoint(const struct bpf_program *prog,
 				   const char *tp_name);
+LIBBPF_API struct bpf_link *
+bpf_program__attach_raw_tracepoint_opts(const struct bpf_program *prog,
+					const char *tp_name,
+					struct bpf_raw_tracepoint_opts *opts);
 
 struct bpf_trace_opts {
 	/* size of this struct, for forward/backward compatibility */
@@ -784,6 +797,8 @@ bpf_program__attach_cgroup(const struct bpf_program *prog, int cgroup_fd);
 LIBBPF_API struct bpf_link *
 bpf_program__attach_netns(const struct bpf_program *prog, int netns_fd);
 LIBBPF_API struct bpf_link *
+bpf_program__attach_sockmap(const struct bpf_program *prog, int map_fd);
+LIBBPF_API struct bpf_link *
 bpf_program__attach_xdp(const struct bpf_program *prog, int ifindex);
 LIBBPF_API struct bpf_link *
 bpf_program__attach_freplace(const struct bpf_program *prog,
@@ -1282,6 +1297,7 @@ LIBBPF_API int ring_buffer__add(struct ring_buffer *rb, int map_fd,
 				ring_buffer_sample_fn sample_cb, void *ctx);
 LIBBPF_API int ring_buffer__poll(struct ring_buffer *rb, int timeout_ms);
 LIBBPF_API int ring_buffer__consume(struct ring_buffer *rb);
+LIBBPF_API int ring_buffer__consume_n(struct ring_buffer *rb, size_t n);
 LIBBPF_API int ring_buffer__epoll_fd(const struct ring_buffer *rb);
 
 /**
@@ -1356,6 +1372,17 @@ LIBBPF_API int ring__map_fd(const struct ring *r);
  */
 LIBBPF_API int ring__consume(struct ring *r);
 
+/**
+ * @brief **ring__consume_n()** consumes up to a requested amount of items from
+ * a ringbuffer without event polling.
+ *
+ * @param r A ringbuffer object.
+ * @param n Maximum amount of items to consume.
+ * @return The number of items consumed, or a negative number if any of the
+ * callbacks return an error.
+ */
+LIBBPF_API int ring__consume_n(struct ring *r, size_t n);
+
 struct user_ring_buffer_opts {
 	size_t sz; /* size of this struct, for forward/backward compatibility */
 };
diff --git a/tools/lib/bpf/libbpf.map b/tools/lib/bpf/libbpf.map
index 86804fd90dd1..c1ce8aa3520b 100644
--- a/tools/lib/bpf/libbpf.map
+++ b/tools/lib/bpf/libbpf.map
@@ -410,7 +410,16 @@ LIBBPF_1.3.0 {
 
 LIBBPF_1.4.0 {
 	global:
+		bpf_program__attach_raw_tracepoint_opts;
+		bpf_raw_tracepoint_open_opts;
 		bpf_token_create;
 		btf__new_split;
 		btf_ext__raw_data;
 } LIBBPF_1.3.0;
+
+LIBBPF_1.5.0 {
+	global:
+		bpf_program__attach_sockmap;
+		ring__consume_n;
+		ring_buffer__consume_n;
+} LIBBPF_1.4.0;
diff --git a/tools/lib/bpf/libbpf_internal.h b/tools/lib/bpf/libbpf_internal.h
index 864b36177424..a0dcfb82e455 100644
--- a/tools/lib/bpf/libbpf_internal.h
+++ b/tools/lib/bpf/libbpf_internal.h
@@ -518,11 +518,6 @@ int btf_ext_visit_str_offs(struct btf_ext *btf_ext, str_off_visit_fn visit, void
 __s32 btf__find_by_name_kind_own(const struct btf *btf, const char *type_name,
 				 __u32 kind);
 
-typedef int (*kallsyms_cb_t)(unsigned long long sym_addr, char sym_type,
-			     const char *sym_name, void *ctx);
-
-int libbpf_kallsyms_parse(kallsyms_cb_t cb, void *arg);
-
 /* handle direct returned errors */
 static inline int libbpf_err(int ret)
 {
diff --git a/tools/lib/bpf/libbpf_probes.c b/tools/lib/bpf/libbpf_probes.c
index 302188122439..9dfbe7750f56 100644
--- a/tools/lib/bpf/libbpf_probes.c
+++ b/tools/lib/bpf/libbpf_probes.c
@@ -448,7 +448,8 @@ int libbpf_probe_bpf_helper(enum bpf_prog_type prog_type, enum bpf_func_id helpe
 	/* If BPF verifier doesn't recognize BPF helper ID (enum bpf_func_id)
 	 * at all, it will emit something like "invalid func unknown#181".
 	 * If BPF verifier recognizes BPF helper but it's not supported for
-	 * given BPF program type, it will emit "unknown func bpf_sys_bpf#166".
+	 * given BPF program type, it will emit "unknown func bpf_sys_bpf#166"
+	 * or "program of this type cannot use helper bpf_sys_bpf#166".
 	 * In both cases, provided combination of BPF program type and BPF
 	 * helper is not supported by the kernel.
 	 * In all other cases, probe_prog_load() above will either succeed (e.g.,
@@ -457,7 +458,8 @@ int libbpf_probe_bpf_helper(enum bpf_prog_type prog_type, enum bpf_func_id helpe
 	 * that), or we'll get some more specific BPF verifier error about
 	 * some unsatisfied conditions.
 	 */
-	if (ret == 0 && (strstr(buf, "invalid func ") || strstr(buf, "unknown func ")))
+	if (ret == 0 && (strstr(buf, "invalid func ") || strstr(buf, "unknown func ") ||
+			 strstr(buf, "program of this type cannot use helper ")))
 		return 0;
 	return 1; /* assume supported */
 }
diff --git a/tools/lib/bpf/libbpf_version.h b/tools/lib/bpf/libbpf_version.h
index e783a47da815..d6e5eff967cb 100644
--- a/tools/lib/bpf/libbpf_version.h
+++ b/tools/lib/bpf/libbpf_version.h
@@ -4,6 +4,6 @@
 #define __LIBBPF_VERSION_H
 
 #define LIBBPF_MAJOR_VERSION 1
-#define LIBBPF_MINOR_VERSION 4
+#define LIBBPF_MINOR_VERSION 5
 
 #endif /* __LIBBPF_VERSION_H */
diff --git a/tools/lib/bpf/ringbuf.c b/tools/lib/bpf/ringbuf.c
index aacb64278a01..bfd8dac4c0cc 100644
--- a/tools/lib/bpf/ringbuf.c
+++ b/tools/lib/bpf/ringbuf.c
@@ -231,7 +231,7 @@ static inline int roundup_len(__u32 len)
 	return (len + 7) / 8 * 8;
 }
 
-static int64_t ringbuf_process_ring(struct ring *r)
+static int64_t ringbuf_process_ring(struct ring *r, size_t n)
 {
 	int *len_ptr, len, err;
 	/* 64-bit to avoid overflow in case of extreme application behavior */
@@ -268,12 +268,42 @@ static int64_t ringbuf_process_ring(struct ring *r)
 			}
 
 			smp_store_release(r->consumer_pos, cons_pos);
+
+			if (cnt >= n)
+				goto done;
 		}
 	} while (got_new_data);
 done:
 	return cnt;
 }
 
+/* Consume available ring buffer(s) data without event polling, up to n
+ * records.
+ *
+ * Returns number of records consumed across all registered ring buffers (or
+ * n, whichever is less), or negative number if any of the callbacks return
+ * error.
+ */
+int ring_buffer__consume_n(struct ring_buffer *rb, size_t n)
+{
+	int64_t err, res = 0;
+	int i;
+
+	for (i = 0; i < rb->ring_cnt; i++) {
+		struct ring *ring = rb->rings[i];
+
+		err = ringbuf_process_ring(ring, n);
+		if (err < 0)
+			return libbpf_err(err);
+		res += err;
+		n -= err;
+
+		if (n == 0)
+			break;
+	}
+	return res > INT_MAX ? INT_MAX : res;
+}
+
 /* Consume available ring buffer(s) data without event polling.
  * Returns number of records consumed across all registered ring buffers (or
  * INT_MAX, whichever is less), or negative number if any of the callbacks
@@ -287,13 +317,15 @@ int ring_buffer__consume(struct ring_buffer *rb)
 	for (i = 0; i < rb->ring_cnt; i++) {
 		struct ring *ring = rb->rings[i];
 
-		err = ringbuf_process_ring(ring);
+		err = ringbuf_process_ring(ring, INT_MAX);
 		if (err < 0)
 			return libbpf_err(err);
 		res += err;
+		if (res > INT_MAX) {
+			res = INT_MAX;
+			break;
+		}
 	}
-	if (res > INT_MAX)
-		return INT_MAX;
 	return res;
 }
 
@@ -314,13 +346,13 @@ int ring_buffer__poll(struct ring_buffer *rb, int timeout_ms)
 		__u32 ring_id = rb->events[i].data.fd;
 		struct ring *ring = rb->rings[ring_id];
 
-		err = ringbuf_process_ring(ring);
+		err = ringbuf_process_ring(ring, INT_MAX);
 		if (err < 0)
 			return libbpf_err(err);
 		res += err;
 	}
 	if (res > INT_MAX)
-		return INT_MAX;
+		res = INT_MAX;
 	return res;
 }
 
@@ -371,17 +403,22 @@ int ring__map_fd(const struct ring *r)
 	return r->map_fd;
 }
 
-int ring__consume(struct ring *r)
+int ring__consume_n(struct ring *r, size_t n)
 {
 	int64_t res;
 
-	res = ringbuf_process_ring(r);
+	res = ringbuf_process_ring(r, n);
 	if (res < 0)
 		return libbpf_err(res);
 
 	return res > INT_MAX ? INT_MAX : res;
 }
 
+int ring__consume(struct ring *r)
+{
+	return ring__consume_n(r, INT_MAX);
+}
+
 static void user_ringbuf_unmap_ring(struct user_ring_buffer *rb)
 {
 	if (rb->consumer_pos) {
diff --git a/tools/lib/bpf/str_error.c b/tools/lib/bpf/str_error.c
index 146da01979c7..5e6a1e27ddf9 100644
--- a/tools/lib/bpf/str_error.c
+++ b/tools/lib/bpf/str_error.c
@@ -2,6 +2,7 @@
 #undef _GNU_SOURCE
 #include <string.h>
 #include <stdio.h>
+#include <errno.h>
 #include "str_error.h"
 
 /* make sure libbpf doesn't use kernel-only integer typedefs */
@@ -15,7 +16,18 @@
 char *libbpf_strerror_r(int err, char *dst, int len)
 {
 	int ret = strerror_r(err < 0 ? -err : err, dst, len);
-	if (ret)
-		snprintf(dst, len, "ERROR: strerror_r(%d)=%d", err, ret);
+	/* on glibc <2.13, ret == -1 and errno is set, if strerror_r() can't
+	 * handle the error, on glibc >=2.13 *positive* (errno-like) error
+	 * code is returned directly
+	 */
+	if (ret == -1)
+		ret = errno;
+	if (ret) {
+		if (ret == EINVAL)
+			/* strerror_r() doesn't recognize this specific error */
+			snprintf(dst, len, "unknown error (%d)", err < 0 ? err : -err);
+		else
+			snprintf(dst, len, "ERROR: strerror_r(%d)=%d", err, ret);
+	}
 	return dst;
 }
diff --git a/tools/lib/bpf/usdt.bpf.h b/tools/lib/bpf/usdt.bpf.h
index f6763300b26a..76359bcdc94a 100644
--- a/tools/lib/bpf/usdt.bpf.h
+++ b/tools/lib/bpf/usdt.bpf.h
@@ -214,18 +214,18 @@ long bpf_usdt_cookie(struct pt_regs *ctx)
 
 /* we rely on ___bpf_apply() and ___bpf_narg() macros already defined in bpf_tracing.h */
 #define ___bpf_usdt_args0() ctx
-#define ___bpf_usdt_args1(x) ___bpf_usdt_args0(), ({ long _x; bpf_usdt_arg(ctx, 0, &_x); (void *)_x; })
-#define ___bpf_usdt_args2(x, args...) ___bpf_usdt_args1(args), ({ long _x; bpf_usdt_arg(ctx, 1, &_x); (void *)_x; })
-#define ___bpf_usdt_args3(x, args...) ___bpf_usdt_args2(args), ({ long _x; bpf_usdt_arg(ctx, 2, &_x); (void *)_x; })
-#define ___bpf_usdt_args4(x, args...) ___bpf_usdt_args3(args), ({ long _x; bpf_usdt_arg(ctx, 3, &_x); (void *)_x; })
-#define ___bpf_usdt_args5(x, args...) ___bpf_usdt_args4(args), ({ long _x; bpf_usdt_arg(ctx, 4, &_x); (void *)_x; })
-#define ___bpf_usdt_args6(x, args...) ___bpf_usdt_args5(args), ({ long _x; bpf_usdt_arg(ctx, 5, &_x); (void *)_x; })
-#define ___bpf_usdt_args7(x, args...) ___bpf_usdt_args6(args), ({ long _x; bpf_usdt_arg(ctx, 6, &_x); (void *)_x; })
-#define ___bpf_usdt_args8(x, args...) ___bpf_usdt_args7(args), ({ long _x; bpf_usdt_arg(ctx, 7, &_x); (void *)_x; })
-#define ___bpf_usdt_args9(x, args...) ___bpf_usdt_args8(args), ({ long _x; bpf_usdt_arg(ctx, 8, &_x); (void *)_x; })
-#define ___bpf_usdt_args10(x, args...) ___bpf_usdt_args9(args), ({ long _x; bpf_usdt_arg(ctx, 9, &_x); (void *)_x; })
-#define ___bpf_usdt_args11(x, args...) ___bpf_usdt_args10(args), ({ long _x; bpf_usdt_arg(ctx, 10, &_x); (void *)_x; })
-#define ___bpf_usdt_args12(x, args...) ___bpf_usdt_args11(args), ({ long _x; bpf_usdt_arg(ctx, 11, &_x); (void *)_x; })
+#define ___bpf_usdt_args1(x) ___bpf_usdt_args0(), ({ long _x; bpf_usdt_arg(ctx, 0, &_x); _x; })
+#define ___bpf_usdt_args2(x, args...) ___bpf_usdt_args1(args), ({ long _x; bpf_usdt_arg(ctx, 1, &_x); _x; })
+#define ___bpf_usdt_args3(x, args...) ___bpf_usdt_args2(args), ({ long _x; bpf_usdt_arg(ctx, 2, &_x); _x; })
+#define ___bpf_usdt_args4(x, args...) ___bpf_usdt_args3(args), ({ long _x; bpf_usdt_arg(ctx, 3, &_x); _x; })
+#define ___bpf_usdt_args5(x, args...) ___bpf_usdt_args4(args), ({ long _x; bpf_usdt_arg(ctx, 4, &_x); _x; })
+#define ___bpf_usdt_args6(x, args...) ___bpf_usdt_args5(args), ({ long _x; bpf_usdt_arg(ctx, 5, &_x); _x; })
+#define ___bpf_usdt_args7(x, args...) ___bpf_usdt_args6(args), ({ long _x; bpf_usdt_arg(ctx, 6, &_x); _x; })
+#define ___bpf_usdt_args8(x, args...) ___bpf_usdt_args7(args), ({ long _x; bpf_usdt_arg(ctx, 7, &_x); _x; })
+#define ___bpf_usdt_args9(x, args...) ___bpf_usdt_args8(args), ({ long _x; bpf_usdt_arg(ctx, 8, &_x); _x; })
+#define ___bpf_usdt_args10(x, args...) ___bpf_usdt_args9(args), ({ long _x; bpf_usdt_arg(ctx, 9, &_x); _x; })
+#define ___bpf_usdt_args11(x, args...) ___bpf_usdt_args10(args), ({ long _x; bpf_usdt_arg(ctx, 10, &_x); _x; })
+#define ___bpf_usdt_args12(x, args...) ___bpf_usdt_args11(args), ({ long _x; bpf_usdt_arg(ctx, 11, &_x); _x; })
 #define ___bpf_usdt_args(args...) ___bpf_apply(___bpf_usdt_args, ___bpf_narg(args))(args)
 
 /*
diff --git a/tools/net/ynl/cli.py b/tools/net/ynl/cli.py
index f131e33ac3ee..b8481f401376 100755
--- a/tools/net/ynl/cli.py
+++ b/tools/net/ynl/cli.py
@@ -19,13 +19,30 @@ class YnlEncoder(json.JSONEncoder):
 
 
 def main():
-    parser = argparse.ArgumentParser(description='YNL CLI sample')
+    description = """
+    YNL CLI utility - a general purpose netlink utility that uses YAML
+    specs to drive protocol encoding and decoding.
+    """
+    epilog = """
+    The --multi option can be repeated to include several do operations
+    in the same netlink payload.
+    """
+
+    parser = argparse.ArgumentParser(description=description,
+                                     epilog=epilog)
     parser.add_argument('--spec', dest='spec', type=str, required=True)
     parser.add_argument('--schema', dest='schema', type=str)
     parser.add_argument('--no-schema', action='store_true')
     parser.add_argument('--json', dest='json_text', type=str)
-    parser.add_argument('--do', dest='do', type=str)
-    parser.add_argument('--dump', dest='dump', type=str)
+
+    group = parser.add_mutually_exclusive_group()
+    group.add_argument('--do', dest='do', metavar='DO-OPERATION', type=str)
+    group.add_argument('--multi', dest='multi', nargs=2, action='append',
+                       metavar=('DO-OPERATION', 'JSON_TEXT'), type=str)
+    group.add_argument('--dump', dest='dump', metavar='DUMP-OPERATION', type=str)
+    group.add_argument('--list-ops', action='store_true')
+    group.add_argument('--list-msgs', action='store_true')
+
     parser.add_argument('--sleep', dest='sleep', type=int)
     parser.add_argument('--subscribe', dest='ntf', type=str)
     parser.add_argument('--replace', dest='flags', action='append_const',
@@ -66,6 +83,13 @@ def main():
     if args.sleep:
         time.sleep(args.sleep)
 
+    if args.list_ops:
+        for op_name, op in ynl.ops.items():
+            print(op_name, " [", ", ".join(op.modes), "]")
+    if args.list_msgs:
+        for op_name, op in ynl.msgs.items():
+            print(op_name, " [", ", ".join(op.modes), "]")
+
     try:
         if args.do:
             reply = ynl.do(args.do, attrs, args.flags)
@@ -73,6 +97,10 @@ def main():
         if args.dump:
             reply = ynl.dump(args.dump, attrs)
             output(reply)
+        if args.multi:
+            ops = [ (item[0], json.loads(item[1]), args.flags or []) for item in args.multi ]
+            reply = ynl.do_multi(ops)
+            output(reply)
     except NlError as e:
         print(e)
         exit(1)
diff --git a/tools/net/ynl/ethtool.py b/tools/net/ynl/ethtool.py
index 6c9f7e31250c..63c471f075ab 100755
--- a/tools/net/ynl/ethtool.py
+++ b/tools/net/ynl/ethtool.py
@@ -6,6 +6,7 @@ import json
 import pprint
 import sys
 import re
+import os
 
 from lib import YnlFamily
 
@@ -152,8 +153,11 @@ def main():
     global args
     args = parser.parse_args()
 
-    spec = '../../../Documentation/netlink/specs/ethtool.yaml'
-    schema = '../../../Documentation/netlink/genetlink-legacy.yaml'
+    script_abs_dir = os.path.dirname(os.path.abspath(sys.argv[0]))
+    spec = os.path.join(script_abs_dir,
+                        '../../../Documentation/netlink/specs/ethtool.yaml')
+    schema = os.path.join(script_abs_dir,
+                          '../../../Documentation/netlink/genetlink-legacy.yaml')
 
     ynl = YnlFamily(spec, schema)
 
@@ -320,7 +324,13 @@ def main():
         return
 
     if args.show_time_stamping:
-        tsinfo = dumpit(ynl, args, 'tsinfo-get')
+        req = {
+          'header': {
+            'flags': 'stats',
+          },
+        }
+
+        tsinfo = dumpit(ynl, args, 'tsinfo-get', req)
 
         print(f'Time stamping parameters for {args.device}:')
 
@@ -334,6 +344,9 @@ def main():
 
         print('Hardware Receive Filter Modes:')
         [print(f'\t{v}') for v in bits_to_dict(tsinfo['rx-filters'])]
+
+        print('Statistics:')
+        [print(f'\t{k}: {v}') for k, v in tsinfo['stats'].items()]
         return
 
     print(f'Settings for {args.device}:')
diff --git a/tools/net/ynl/lib/nlspec.py b/tools/net/ynl/lib/nlspec.py
index 6d08ab9e213f..b6d6f8aef423 100644
--- a/tools/net/ynl/lib/nlspec.py
+++ b/tools/net/ynl/lib/nlspec.py
@@ -335,6 +335,7 @@ class SpecOperation(SpecElement):
 
         req_value       numerical ID when serialized, user -> kernel
         rsp_value       numerical ID when serialized, user <- kernel
+        modes           supported operation modes (do, dump, event etc.)
         is_call         bool, whether the operation is a call
         is_async        bool, whether the operation is a notification
         is_resv         bool, whether the operation does not exist (it's just a reserved ID)
@@ -350,6 +351,7 @@ class SpecOperation(SpecElement):
         self.req_value = req_value
         self.rsp_value = rsp_value
 
+        self.modes = yaml.keys() & {'do', 'dump', 'event', 'notify'}
         self.is_call = 'do' in yaml or 'dump' in yaml
         self.is_async = 'notify' in yaml or 'event' in yaml
         self.is_resv = not self.is_async and not self.is_call
diff --git a/tools/net/ynl/lib/ynl.h b/tools/net/ynl/lib/ynl.h
index 9842e85a8c57..eef7c6324ed4 100644
--- a/tools/net/ynl/lib/ynl.h
+++ b/tools/net/ynl/lib/ynl.h
@@ -91,6 +91,18 @@ void ynl_sock_destroy(struct ynl_sock *ys);
 	     !ynl_dump_obj_is_last(iter);				\
 	     iter = ynl_dump_obj_next(iter))
 
+/**
+ * ynl_dump_empty() - does the dump have no entries
+ * @dump: pointer to the dump list, as returned by a dump call
+ *
+ * Check if the dump is empty, i.e. contains no objects.
+ * Dump calls return NULL on error, and terminator element if empty.
+ */
+static inline bool ynl_dump_empty(void *dump)
+{
+	return dump == (void *)YNL_LIST_END;
+}
+
 int ynl_subscribe(struct ynl_sock *ys, const char *grp_name);
 int ynl_socket_get_fd(struct ynl_sock *ys);
 int ynl_ntf_check(struct ynl_sock *ys);
diff --git a/tools/net/ynl/lib/ynl.py b/tools/net/ynl/lib/ynl.py
index 25810e18b0a7..35e666928119 100644
--- a/tools/net/ynl/lib/ynl.py
+++ b/tools/net/ynl/lib/ynl.py
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 
 from collections import namedtuple
+from enum import Enum
 import functools
 import os
 import random
@@ -76,13 +77,33 @@ class Netlink:
     NLMSGERR_ATTR_MISS_TYPE = 5
     NLMSGERR_ATTR_MISS_NEST = 6
 
+    # Policy types
+    NL_POLICY_TYPE_ATTR_TYPE = 1
+    NL_POLICY_TYPE_ATTR_MIN_VALUE_S = 2
+    NL_POLICY_TYPE_ATTR_MAX_VALUE_S = 3
+    NL_POLICY_TYPE_ATTR_MIN_VALUE_U = 4
+    NL_POLICY_TYPE_ATTR_MAX_VALUE_U = 5
+    NL_POLICY_TYPE_ATTR_MIN_LENGTH = 6
+    NL_POLICY_TYPE_ATTR_MAX_LENGTH = 7
+    NL_POLICY_TYPE_ATTR_POLICY_IDX = 8
+    NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE = 9
+    NL_POLICY_TYPE_ATTR_BITFIELD32_MASK = 10
+    NL_POLICY_TYPE_ATTR_PAD = 11
+    NL_POLICY_TYPE_ATTR_MASK = 12
+
+    AttrType = Enum('AttrType', ['flag', 'u8', 'u16', 'u32', 'u64',
+                                  's8', 's16', 's32', 's64',
+                                  'binary', 'string', 'nul-string',
+                                  'nested', 'nested-array',
+                                  'bitfield32', 'sint', 'uint'])
 
 class NlError(Exception):
   def __init__(self, nl_msg):
     self.nl_msg = nl_msg
+    self.error = -nl_msg.error
 
   def __str__(self):
-    return f"Netlink error: {os.strerror(-self.nl_msg.error)}\n{self.nl_msg}"
+    return f"Netlink error: {os.strerror(self.error)}\n{self.nl_msg}"
 
 
 class ConfigError(Exception):
@@ -199,6 +220,8 @@ class NlMsg:
                     self.extack['miss-nest'] = extack.as_scalar('u32')
                 elif extack.type == Netlink.NLMSGERR_ATTR_OFFS:
                     self.extack['bad-attr-offs'] = extack.as_scalar('u32')
+                elif extack.type == Netlink.NLMSGERR_ATTR_POLICY:
+                    self.extack['policy'] = self._decode_policy(extack.raw)
                 else:
                     if 'unknown' not in self.extack:
                         self.extack['unknown'] = []
@@ -210,10 +233,33 @@ class NlMsg:
                     miss_type = self.extack['miss-type']
                     if miss_type in attr_space.attrs_by_val:
                         spec = attr_space.attrs_by_val[miss_type]
-                        desc = spec['name']
+                        self.extack['miss-type'] = spec['name']
                         if 'doc' in spec:
-                            desc += f" ({spec['doc']})"
-                        self.extack['miss-type'] = desc
+                            self.extack['miss-type-doc'] = spec['doc']
+
+    def _decode_policy(self, raw):
+        policy = {}
+        for attr in NlAttrs(raw):
+            if attr.type == Netlink.NL_POLICY_TYPE_ATTR_TYPE:
+                type = attr.as_scalar('u32')
+                policy['type'] = Netlink.AttrType(type).name
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MIN_VALUE_S:
+                policy['min-value'] = attr.as_scalar('s64')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MAX_VALUE_S:
+                policy['max-value'] = attr.as_scalar('s64')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MIN_VALUE_U:
+                policy['min-value'] = attr.as_scalar('u64')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MAX_VALUE_U:
+                policy['max-value'] = attr.as_scalar('u64')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MIN_LENGTH:
+                policy['min-length'] = attr.as_scalar('u32')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MAX_LENGTH:
+                policy['max-length'] = attr.as_scalar('u32')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_BITFIELD32_MASK:
+                policy['bitfield32-mask'] = attr.as_scalar('u32')
+            elif attr.type == Netlink.NL_POLICY_TYPE_ATTR_MASK:
+                policy['mask'] = attr.as_scalar('u64')
+        return policy
 
     def cmd(self):
         return self.nl_type
@@ -340,12 +386,9 @@ class NetlinkProtocol:
     def _decode(self, nl_msg):
         return nl_msg
 
-    def decode(self, ynl, nl_msg):
+    def decode(self, ynl, nl_msg, op):
         msg = self._decode(nl_msg)
-        fixed_header_size = 0
-        if ynl:
-            op = ynl.rsp_by_value[msg.cmd()]
-            fixed_header_size = ynl._struct_size(op.fixed_header)
+        fixed_header_size = ynl._struct_size(op.fixed_header)
         msg.raw_attrs = NlAttrs(msg.raw, fixed_header_size)
         return msg
 
@@ -585,15 +628,28 @@ class YnlFamily(SpecFamily):
                 decoded = self._formatted_string(decoded, attr_spec.display_hint)
         return decoded
 
-    def _decode_array_nest(self, attr, attr_spec):
+    def _decode_array_attr(self, attr, attr_spec):
         decoded = []
         offset = 0
         while offset < len(attr.raw):
             item = NlAttr(attr.raw, offset)
             offset += item.full_len
 
-            subattrs = self._decode(NlAttrs(item.raw), attr_spec['nested-attributes'])
-            decoded.append({ item.type: subattrs })
+            if attr_spec["sub-type"] == 'nest':
+                subattrs = self._decode(NlAttrs(item.raw), attr_spec['nested-attributes'])
+                decoded.append({ item.type: subattrs })
+            elif attr_spec["sub-type"] == 'binary':
+                subattrs = item.as_bin()
+                if attr_spec.display_hint:
+                    subattrs = self._formatted_string(subattrs, attr_spec.display_hint)
+                decoded.append(subattrs)
+            elif attr_spec["sub-type"] in NlAttr.type_formats:
+                subattrs = item.as_scalar(attr_spec['sub-type'], attr_spec.byte_order)
+                if attr_spec.display_hint:
+                    subattrs = self._formatted_string(subattrs, attr_spec.display_hint)
+                decoded.append(subattrs)
+            else:
+                raise Exception(f'Unknown {attr_spec["sub-type"]} with name {attr_spec["name"]}')
         return decoded
 
     def _decode_nest_type_value(self, attr, attr_spec):
@@ -687,8 +743,8 @@ class YnlFamily(SpecFamily):
                 decoded = attr.as_scalar(attr_spec['type'], attr_spec.byte_order)
                 if 'enum' in attr_spec:
                     decoded = self._decode_enum(decoded, attr_spec)
-            elif attr_spec["type"] == 'array-nest':
-                decoded = self._decode_array_nest(attr, attr_spec)
+            elif attr_spec["type"] == 'indexed-array':
+                decoded = self._decode_array_attr(attr, attr_spec)
             elif attr_spec["type"] == 'bitfield32':
                 value, selector = struct.unpack("II", attr.raw)
                 if 'enum' in attr_spec:
@@ -738,7 +794,7 @@ class YnlFamily(SpecFamily):
         if 'bad-attr-offs' not in extack:
             return
 
-        msg = self.nlproto.decode(self, NlMsg(request, 0, op.attr_set))
+        msg = self.nlproto.decode(self, NlMsg(request, 0, op.attr_set), op)
         offset = self.nlproto.msghdr_size() + self._struct_size(op.fixed_header)
         path = self._decode_extack_path(msg.raw_attrs, op.attr_set, offset,
                                         extack['bad-attr-offs'])
@@ -820,7 +876,10 @@ class YnlFamily(SpecFamily):
         if display_hint == 'mac':
             formatted = ':'.join('%02x' % b for b in raw)
         elif display_hint == 'hex':
-            formatted = bytes.hex(raw, ' ')
+            if isinstance(raw, int):
+                formatted = hex(raw)
+            else:
+                formatted = bytes.hex(raw, ' ')
         elif display_hint in [ 'ipv4', 'ipv6' ]:
             formatted = format(ipaddress.ip_address(raw))
         elif display_hint == 'uuid':
@@ -860,7 +919,8 @@ class YnlFamily(SpecFamily):
                     print("Netlink done while checking for ntf!?")
                     continue
 
-                decoded = self.nlproto.decode(self, nl_msg)
+                op = self.rsp_by_value[nl_msg.cmd()]
+                decoded = self.nlproto.decode(self, nl_msg, op)
                 if decoded.cmd() not in self.async_msg_ids:
                     print("Unexpected msg id done while checking for ntf", decoded)
                     continue
@@ -878,16 +938,11 @@ class YnlFamily(SpecFamily):
 
       return op['do']['request']['attributes'].copy()
 
-    def _op(self, method, vals, flags=None, dump=False):
-        op = self.ops[method]
-
+    def _encode_message(self, op, vals, flags, req_seq):
         nl_flags = Netlink.NLM_F_REQUEST | Netlink.NLM_F_ACK
         for flag in flags or []:
             nl_flags |= flag
-        if dump:
-            nl_flags |= Netlink.NLM_F_DUMP
 
-        req_seq = random.randint(1024, 65535)
         msg = self.nlproto.message(nl_flags, op.req_value, 1, req_seq)
         if op.fixed_header:
             msg += self._encode_struct(op.fixed_header, vals)
@@ -895,18 +950,36 @@ class YnlFamily(SpecFamily):
         for name, value in vals.items():
             msg += self._add_attr(op.attr_set.name, name, value, search_attrs)
         msg = _genl_msg_finalize(msg)
+        return msg
 
-        self.sock.send(msg, 0)
+    def _ops(self, ops):
+        reqs_by_seq = {}
+        req_seq = random.randint(1024, 65535)
+        payload = b''
+        for (method, vals, flags) in ops:
+            op = self.ops[method]
+            msg = self._encode_message(op, vals, flags, req_seq)
+            reqs_by_seq[req_seq] = (op, msg, flags)
+            payload += msg
+            req_seq += 1
+
+        self.sock.send(payload, 0)
 
         done = False
         rsp = []
+        op_rsp = []
         while not done:
             reply = self.sock.recv(self._recv_size)
             nms = NlMsgs(reply, attr_space=op.attr_set)
             self._recv_dbg_print(reply, nms)
             for nl_msg in nms:
-                if nl_msg.extack:
-                    self._decode_extack(msg, op, nl_msg.extack)
+                if nl_msg.nl_seq in reqs_by_seq:
+                    (op, req_msg, req_flags) = reqs_by_seq[nl_msg.nl_seq]
+                    if nl_msg.extack:
+                        self._decode_extack(req_msg, op, nl_msg.extack)
+                else:
+                    op = self.rsp_by_value[nl_msg.cmd()]
+                    req_flags = []
 
                 if nl_msg.error:
                     raise NlError(nl_msg)
@@ -914,13 +987,25 @@ class YnlFamily(SpecFamily):
                     if nl_msg.extack:
                         print("Netlink warning:")
                         print(nl_msg)
-                    done = True
+
+                    if Netlink.NLM_F_DUMP in req_flags:
+                        rsp.append(op_rsp)
+                    elif not op_rsp:
+                        rsp.append(None)
+                    elif len(op_rsp) == 1:
+                        rsp.append(op_rsp[0])
+                    else:
+                        rsp.append(op_rsp)
+                    op_rsp = []
+
+                    del reqs_by_seq[nl_msg.nl_seq]
+                    done = len(reqs_by_seq) == 0
                     break
 
-                decoded = self.nlproto.decode(self, nl_msg)
+                decoded = self.nlproto.decode(self, nl_msg, op)
 
                 # Check if this is a reply to our request
-                if nl_msg.nl_seq != req_seq or decoded.cmd() != op.rsp_value:
+                if nl_msg.nl_seq not in reqs_by_seq or decoded.cmd() != op.rsp_value:
                     if decoded.cmd() in self.async_msg_ids:
                         self.handle_ntf(decoded)
                         continue
@@ -931,16 +1016,23 @@ class YnlFamily(SpecFamily):
                 rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
                 if op.fixed_header:
                     rsp_msg.update(self._decode_struct(decoded.raw, op.fixed_header))
-                rsp.append(rsp_msg)
+                op_rsp.append(rsp_msg)
 
-        if not rsp:
-            return None
-        if not dump and len(rsp) == 1:
-            return rsp[0]
         return rsp
 
+    def _op(self, method, vals, flags=None, dump=False):
+        req_flags = flags or []
+        if dump:
+            req_flags.append(Netlink.NLM_F_DUMP)
+
+        ops = [(method, vals, req_flags)]
+        return self._ops(ops)[0]
+
     def do(self, method, vals, flags=None):
         return self._op(method, vals, flags)
 
     def dump(self, method, vals):
-        return self._op(method, vals, [], dump=True)
+        return self._op(method, vals, dump=True)
+
+    def do_multi(self, ops):
+        return self._ops(ops)
diff --git a/tools/net/ynl/samples/netdev.c b/tools/net/ynl/samples/netdev.c
index 591b90e21890..3e7b29bd55d5 100644
--- a/tools/net/ynl/samples/netdev.c
+++ b/tools/net/ynl/samples/netdev.c
@@ -100,6 +100,8 @@ int main(int argc, char **argv)
 		if (!devs)
 			goto err_close;
 
+		if (ynl_dump_empty(devs))
+			fprintf(stderr, "Error: no devices reported\n");
 		ynl_dump_foreach(devs, d)
 			netdev_print_device(d, 0);
 		netdev_dev_get_list_free(devs);
diff --git a/tools/net/ynl/ynl-gen-c.py b/tools/net/ynl/ynl-gen-c.py
index a451cbfbd781..a42d62b23ee0 100755
--- a/tools/net/ynl/ynl-gen-c.py
+++ b/tools/net/ynl/ynl-gen-c.py
@@ -413,7 +413,7 @@ class TypeString(Type):
 
     def _attr_policy(self, policy):
         if 'exact-len' in self.checks:
-            mem = 'NLA_POLICY_EXACT_LEN(' + str(self.checks['exact-len']) + ')'
+            mem = 'NLA_POLICY_EXACT_LEN(' + str(self.get_limit('exact-len')) + ')'
         else:
             mem = '{ .type = ' + policy
             if 'max-len' in self.checks:
@@ -465,7 +465,7 @@ class TypeBinary(Type):
 
     def _attr_policy(self, policy):
         if 'exact-len' in self.checks:
-            mem = 'NLA_POLICY_EXACT_LEN(' + str(self.checks['exact-len']) + ')'
+            mem = 'NLA_POLICY_EXACT_LEN(' + str(self.get_limit('exact-len')) + ')'
         else:
             mem = '{ '
             if len(self.checks) == 1 and 'min-len' in self.checks:
@@ -841,8 +841,11 @@ class AttrSet(SpecAttrSet):
             t = TypeBitfield32(self.family, self, elem, value)
         elif elem['type'] == 'nest':
             t = TypeNest(self.family, self, elem, value)
-        elif elem['type'] == 'array-nest':
-            t = TypeArrayNest(self.family, self, elem, value)
+        elif elem['type'] == 'indexed-array' and 'sub-type' in elem:
+            if elem["sub-type"] == 'nest':
+                t = TypeArrayNest(self.family, self, elem, value)
+            else:
+                raise Exception(f'new_attr: unsupported sub-type {elem["sub-type"]}')
         elif elem['type'] == 'nest-type-value':
             t = TypeNestTypeValue(self.family, self, elem, value)
         else:
@@ -1055,7 +1058,7 @@ class Family(SpecFamily):
                     if nested in self.root_sets:
                         raise Exception("Inheriting members to a space used as root not supported")
                     inherit.update(set(spec['type-value']))
-                elif spec['type'] == 'array-nest':
+                elif spec['type'] == 'indexed-array':
                     inherit.add('idx')
                 self.pure_nested_structs[nested].set_inherited(inherit)
 
@@ -1619,9 +1622,12 @@ def _multi_parse(ri, struct, init_lines, local_vars):
     multi_attrs = set()
     needs_parg = False
     for arg, aspec in struct.member_list():
-        if aspec['type'] == 'array-nest':
-            local_vars.append(f'const struct nlattr *attr_{aspec.c_name};')
-            array_nests.add(arg)
+        if aspec['type'] == 'indexed-array' and 'sub-type' in aspec:
+            if aspec["sub-type"] == 'nest':
+                local_vars.append(f'const struct nlattr *attr_{aspec.c_name};')
+                array_nests.add(arg)
+            else:
+                raise Exception(f'Not supported sub-type {aspec["sub-type"]}')
         if 'multi-attr' in aspec:
             multi_attrs.add(arg)
         needs_parg |= 'nested-attributes' in aspec
diff --git a/tools/net/ynl/ynl-gen-rst.py b/tools/net/ynl/ynl-gen-rst.py
index 927407b3efb3..657e881d2ea4 100755
--- a/tools/net/ynl/ynl-gen-rst.py
+++ b/tools/net/ynl/ynl-gen-rst.py
@@ -82,9 +82,9 @@ def rst_subsubsection(title: str) -> str:
     return f"{title}\n" + "~" * len(title)
 
 
-def rst_section(title: str) -> str:
+def rst_section(namespace: str, prefix: str, title: str) -> str:
     """Add a section to the document"""
-    return f"\n{title}\n" + "=" * len(title)
+    return f".. _{namespace}-{prefix}-{title}:\n\n{title}\n" + "=" * len(title)
 
 
 def rst_subtitle(title: str) -> str:
@@ -102,6 +102,17 @@ def rst_list_inline(list_: List[str], level: int = 0) -> str:
     return headroom(level) + "[" + ", ".join(inline(i) for i in list_) + "]"
 
 
+def rst_ref(namespace: str, prefix: str, name: str) -> str:
+    """Add a hyperlink to the document"""
+    mappings = {'enum': 'definition',
+                'fixed-header': 'definition',
+                'nested-attributes': 'attribute-set',
+                'struct': 'definition'}
+    if prefix in mappings:
+        prefix = mappings[prefix]
+    return f":ref:`{namespace}-{prefix}-{name}`"
+
+
 def rst_header() -> str:
     """The headers for all the auto generated RST files"""
     lines = []
@@ -159,20 +170,24 @@ def parse_do_attributes(attrs: Dict[str, Any], level: int = 0) -> str:
     return "\n".join(lines)
 
 
-def parse_operations(operations: List[Dict[str, Any]]) -> str:
+def parse_operations(operations: List[Dict[str, Any]], namespace: str) -> str:
     """Parse operations block"""
     preprocessed = ["name", "doc", "title", "do", "dump"]
+    linkable = ["fixed-header", "attribute-set"]
     lines = []
 
     for operation in operations:
-        lines.append(rst_section(operation["name"]))
+        lines.append(rst_section(namespace, 'operation', operation["name"]))
         lines.append(rst_paragraph(sanitize(operation["doc"])) + "\n")
 
         for key in operation.keys():
             if key in preprocessed:
                 # Skip the special fields
                 continue
-            lines.append(rst_fields(key, operation[key], 0))
+            value = operation[key]
+            if key in linkable:
+                value = rst_ref(namespace, key, value)
+            lines.append(rst_fields(key, value, 0))
 
         if "do" in operation:
             lines.append(rst_paragraph(":do:", 0))
@@ -212,14 +227,14 @@ def parse_entries(entries: List[Dict[str, Any]], level: int) -> str:
     return "\n".join(lines)
 
 
-def parse_definitions(defs: Dict[str, Any]) -> str:
+def parse_definitions(defs: Dict[str, Any], namespace: str) -> str:
     """Parse definitions section"""
     preprocessed = ["name", "entries", "members"]
     ignored = ["render-max"]  # This is not printed
     lines = []
 
     for definition in defs:
-        lines.append(rst_section(definition["name"]))
+        lines.append(rst_section(namespace, 'definition', definition["name"]))
         for k in definition.keys():
             if k in preprocessed + ignored:
                 continue
@@ -237,14 +252,15 @@ def parse_definitions(defs: Dict[str, Any]) -> str:
     return "\n".join(lines)
 
 
-def parse_attr_sets(entries: List[Dict[str, Any]]) -> str:
+def parse_attr_sets(entries: List[Dict[str, Any]], namespace: str) -> str:
     """Parse attribute from attribute-set"""
     preprocessed = ["name", "type"]
+    linkable = ["enum", "nested-attributes", "struct", "sub-message"]
     ignored = ["checks"]
     lines = []
 
     for entry in entries:
-        lines.append(rst_section(entry["name"]))
+        lines.append(rst_section(namespace, 'attribute-set', entry["name"]))
         for attr in entry["attributes"]:
             type_ = attr.get("type")
             attr_line = attr["name"]
@@ -257,25 +273,31 @@ def parse_attr_sets(entries: List[Dict[str, Any]]) -> str:
             for k in attr.keys():
                 if k in preprocessed + ignored:
                     continue
-                lines.append(rst_fields(k, sanitize(attr[k]), 0))
+                if k in linkable:
+                    value = rst_ref(namespace, k, attr[k])
+                else:
+                    value = sanitize(attr[k])
+                lines.append(rst_fields(k, value, 0))
             lines.append("\n")
 
     return "\n".join(lines)
 
 
-def parse_sub_messages(entries: List[Dict[str, Any]]) -> str:
+def parse_sub_messages(entries: List[Dict[str, Any]], namespace: str) -> str:
     """Parse sub-message definitions"""
     lines = []
 
     for entry in entries:
-        lines.append(rst_section(entry["name"]))
+        lines.append(rst_section(namespace, 'sub-message', entry["name"]))
         for fmt in entry["formats"]:
             value = fmt["value"]
 
             lines.append(rst_bullet(bold(value)))
             for attr in ['fixed-header', 'attribute-set']:
                 if attr in fmt:
-                    lines.append(rst_fields(attr, fmt[attr], 1))
+                    lines.append(rst_fields(attr,
+                                            rst_ref(namespace, attr, fmt[attr]),
+                                            1))
             lines.append("\n")
 
     return "\n".join(lines)
@@ -289,9 +311,11 @@ def parse_yaml(obj: Dict[str, Any]) -> str:
 
     lines.append(rst_header())
 
-    title = f"Family ``{obj['name']}`` netlink specification"
+    family = obj['name']
+
+    title = f"Family ``{family}`` netlink specification"
     lines.append(rst_title(title))
-    lines.append(rst_paragraph(".. contents::\n"))
+    lines.append(rst_paragraph(".. contents:: :depth: 3\n"))
 
     if "doc" in obj:
         lines.append(rst_subtitle("Summary"))
@@ -300,7 +324,7 @@ def parse_yaml(obj: Dict[str, Any]) -> str:
     # Operations
     if "operations" in obj:
         lines.append(rst_subtitle("Operations"))
-        lines.append(parse_operations(obj["operations"]["list"]))
+        lines.append(parse_operations(obj["operations"]["list"], family))
 
     # Multicast groups
     if "mcast-groups" in obj:
@@ -310,17 +334,17 @@ def parse_yaml(obj: Dict[str, Any]) -> str:
     # Definitions
     if "definitions" in obj:
         lines.append(rst_subtitle("Definitions"))
-        lines.append(parse_definitions(obj["definitions"]))
+        lines.append(parse_definitions(obj["definitions"], family))
 
     # Attributes set
     if "attribute-sets" in obj:
         lines.append(rst_subtitle("Attribute sets"))
-        lines.append(parse_attr_sets(obj["attribute-sets"]))
+        lines.append(parse_attr_sets(obj["attribute-sets"], family))
 
     # Sub-messages
     if "sub-messages" in obj:
         lines.append(rst_subtitle("Sub-messages"))
-        lines.append(parse_sub_messages(obj["sub-messages"]))
+        lines.append(parse_sub_messages(obj["sub-messages"], family))
 
     return "\n".join(lines)
 
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index c8923375e30d..630e16c54ed5 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -186,8 +186,6 @@ static_var:
 	return ret2;
 }
 
-#define BYTES_TO_BITS(nb)	((nb) * BITS_PER_LONG / sizeof(long))
-
 static int convert_variable_type(Dwarf_Die *vr_die,
 				 struct probe_trace_arg *tvar,
 				 const char *cast, bool user_access)
@@ -217,7 +215,7 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 		total = dwarf_bytesize(vr_die);
 		if (boffs < 0 || total < 0)
 			return -ENOENT;
-		ret = snprintf(buf, 16, "b%d@%d/%zd", bsize, boffs,
+		ret = snprintf(buf, 16, "b%d@%d/%d", bsize, boffs,
 				BYTES_TO_BITS(total));
 		goto formatted;
 	}
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index ed012a7f0786..f0431e6cb67e 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -17,8 +17,10 @@ TARGETS += devices
 TARGETS += dmabuf-heaps
 TARGETS += drivers/dma-buf
 TARGETS += drivers/s390x/uvdevice
+TARGETS += drivers/net
 TARGETS += drivers/net/bonding
 TARGETS += drivers/net/team
+TARGETS += drivers/net/virtio_net
 TARGETS += dt
 TARGETS += efivarfs
 TARGETS += exec
@@ -63,7 +65,7 @@ TARGETS += net/hsr
 TARGETS += net/mptcp
 TARGETS += net/openvswitch
 TARGETS += net/tcp_ao
-TARGETS += netfilter
+TARGETS += net/netfilter
 TARGETS += nsfs
 TARGETS += perf_events
 TARGETS += pidfd
@@ -116,6 +118,13 @@ TARGETS += zram
 TARGETS_HOTPLUG = cpu-hotplug
 TARGETS_HOTPLUG += memory-hotplug
 
+# Networking tests want the net/lib target, include it automatically
+ifneq ($(filter net drivers/net drivers/net/hw,$(TARGETS)),)
+ifeq ($(filter net/lib,$(TARGETS)),)
+	INSTALL_DEP_TARGETS := net/lib
+endif
+endif
+
 # User can optionally provide a TARGETS skiplist.  By default we skip
 # BPF since it has cutting edge build time dependencies which require
 # more effort to install.
@@ -245,7 +254,7 @@ ifdef INSTALL_PATH
 	install -m 744 run_kselftest.sh $(INSTALL_PATH)/
 	rm -f $(TEST_LIST)
 	@ret=1;	\
-	for TARGET in $(TARGETS); do \
+	for TARGET in $(TARGETS) $(INSTALL_DEP_TARGETS); do \
 		BUILD_TARGET=$$BUILD/$$TARGET;	\
 		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install \
 				INSTALL_PATH=$(INSTALL_PATH)/$$TARGET \
diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
index f1aebabfb017..5025401323af 100644
--- a/tools/testing/selftests/bpf/.gitignore
+++ b/tools/testing/selftests/bpf/.gitignore
@@ -17,7 +17,6 @@ test_dev_cgroup
 test_verifier_log
 feature
 test_sock
-test_sock_addr
 urandom_read
 test_sockmap
 test_lirc_mode2_user
diff --git a/tools/testing/selftests/bpf/DENYLIST.aarch64 b/tools/testing/selftests/bpf/DENYLIST.aarch64
index d8ade15e2789..0445ac38bc07 100644
--- a/tools/testing/selftests/bpf/DENYLIST.aarch64
+++ b/tools/testing/selftests/bpf/DENYLIST.aarch64
@@ -10,5 +10,3 @@ fill_link_info/kprobe_multi_link_info            # bpf_program__attach_kprobe_mu
 fill_link_info/kretprobe_multi_link_info         # bpf_program__attach_kprobe_multi_opts unexpected error: -95
 fill_link_info/kprobe_multi_invalid_ubuff        # bpf_program__attach_kprobe_multi_opts unexpected error: -95
 missed/kprobe_recursion                          # missed_kprobe_recursion__attach unexpected error: -95 (errno 95)
-verifier_arena                                   # JIT does not support arena
-arena_htab                                       # JIT does not support arena
diff --git a/tools/testing/selftests/bpf/DENYLIST.s390x b/tools/testing/selftests/bpf/DENYLIST.s390x
index f4a2f66a683d..c34adf39eeb2 100644
--- a/tools/testing/selftests/bpf/DENYLIST.s390x
+++ b/tools/testing/selftests/bpf/DENYLIST.s390x
@@ -6,3 +6,4 @@ stacktrace_build_id                      # compare_map_keys stackid_hmap vs. sta
 verifier_iterating_callbacks
 verifier_arena                           # JIT does not support arena
 arena_htab                               # JIT does not support arena
+arena_atomics
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 3b9eb40d6343..e0b3887b3d2d 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -53,6 +53,7 @@ progs/syscall.c-CFLAGS := -fno-strict-aliasing
 progs/test_pkt_md_access.c-CFLAGS := -fno-strict-aliasing
 progs/test_sk_lookup.c-CFLAGS := -fno-strict-aliasing
 progs/timer_crash.c-CFLAGS := -fno-strict-aliasing
+progs/test_global_func9.c-CFLAGS := -fno-strict-aliasing
 
 ifneq ($(LLVM),)
 # Silence some warnings when compiled with clang
@@ -81,11 +82,24 @@ TEST_INST_SUBDIRS += bpf_gcc
 # The following tests contain C code that, although technically legal,
 # triggers GCC warnings that cannot be disabled: declaration of
 # anonymous struct types in function parameter lists.
-progs/btf_dump_test_case_bitfields.c-CFLAGS := -Wno-error
-progs/btf_dump_test_case_namespacing.c-CFLAGS := -Wno-error
-progs/btf_dump_test_case_packing.c-CFLAGS := -Wno-error
-progs/btf_dump_test_case_padding.c-CFLAGS := -Wno-error
-progs/btf_dump_test_case_syntax.c-CFLAGS := -Wno-error
+progs/btf_dump_test_case_bitfields.c-bpf_gcc-CFLAGS := -Wno-error
+progs/btf_dump_test_case_namespacing.c-bpf_gcc-CFLAGS := -Wno-error
+progs/btf_dump_test_case_packing.c-bpf_gcc-CFLAGS := -Wno-error
+progs/btf_dump_test_case_padding.c-bpf_gcc-CFLAGS := -Wno-error
+progs/btf_dump_test_case_syntax.c-bpf_gcc-CFLAGS := -Wno-error
+
+# The following tests do type-punning, via the __imm_insn macro, from
+# `struct bpf_insn' to long and then uses the value.  This triggers an
+# "is used uninitialized" warning in GCC due to strict-aliasing
+# rules.
+progs/verifier_ref_tracking.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_unpriv.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_cgroup_storage.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_ld_ind.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_map_ret_val.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_spill_fill.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_subprog_precision.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
+progs/verifier_uninit.c-bpf_gcc-CFLAGS := -fno-strict-aliasing
 endif
 
 ifneq ($(CLANG_CPUV4),)
@@ -102,8 +116,6 @@ TEST_PROGS := test_kmod.sh \
 	test_xdp_redirect_multi.sh \
 	test_xdp_meta.sh \
 	test_xdp_veth.sh \
-	test_offload.py \
-	test_sock_addr.sh \
 	test_tunnel.sh \
 	test_lwt_seg6local.sh \
 	test_lirc_mode2.sh \
@@ -128,7 +140,7 @@ TEST_PROGS_EXTENDED := with_addr.sh \
 	test_xdp_vlan.sh test_bpftool.py
 
 # Compile but not part of 'make run_tests'
-TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
+TEST_GEN_PROGS_EXTENDED = test_skb_cgroup_id_user \
 	flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
 	test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
 	xskxceiver xdp_redirect_multi xdp_synproxy veristat xdp_hw_metadata \
@@ -136,18 +148,7 @@ TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
 
 TEST_GEN_FILES += liburandom_read.so urandom_read sign-file uprobe_multi
 
-# Emit succinct information message describing current building step
-# $1 - generic step name (e.g., CC, LINK, etc);
-# $2 - optional "flavor" specifier; if provided, will be emitted as [flavor];
-# $3 - target (assumed to be file); only file name will be emitted;
-# $4 - optional extra arg, emitted as-is, if provided.
-ifeq ($(V),1)
-Q =
-msg =
-else
-Q = @
-msg = @printf '  %-8s%s %s%s\n' "$(1)" "$(if $(2), [$(2)])" "$(notdir $(3))" "$(if $(4), $(4))";
-MAKEFLAGS += --no-print-directory
+ifneq ($(V),1)
 submake_extras := feature_display=0
 endif
 
@@ -274,7 +275,7 @@ $(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL) $(RUNQSLOWER_OUTPUT)
 	$(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower	       \
 		    OUTPUT=$(RUNQSLOWER_OUTPUT) VMLINUX_BTF=$(VMLINUX_BTF)     \
 		    BPFTOOL_OUTPUT=$(HOST_BUILD_DIR)/bpftool/		       \
-		    BPFOBJ_OUTPUT=$(BUILD_DIR)/libbpf			       \
+		    BPFOBJ_OUTPUT=$(BUILD_DIR)/libbpf/			       \
 		    BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR)		       \
 		    EXTRA_CFLAGS='-g $(OPT_FLAGS) $(SAN_CFLAGS)'	       \
 		    EXTRA_LDFLAGS='$(SAN_LDFLAGS)' &&			       \
@@ -290,11 +291,11 @@ UNPRIV_HELPERS  := $(OUTPUT)/unpriv_helpers.o
 TRACE_HELPERS	:= $(OUTPUT)/trace_helpers.o
 JSON_WRITER		:= $(OUTPUT)/json_writer.o
 CAP_HELPERS	:= $(OUTPUT)/cap_helpers.o
+NETWORK_HELPERS := $(OUTPUT)/network_helpers.o
 
 $(OUTPUT)/test_dev_cgroup: $(CGROUP_HELPERS) $(TESTING_HELPERS)
 $(OUTPUT)/test_skb_cgroup_id_user: $(CGROUP_HELPERS) $(TESTING_HELPERS)
 $(OUTPUT)/test_sock: $(CGROUP_HELPERS) $(TESTING_HELPERS)
-$(OUTPUT)/test_sock_addr: $(CGROUP_HELPERS) $(TESTING_HELPERS)
 $(OUTPUT)/test_sockmap: $(CGROUP_HELPERS) $(TESTING_HELPERS)
 $(OUTPUT)/test_tcpnotify_user: $(CGROUP_HELPERS) $(TESTING_HELPERS) $(TRACE_HELPERS)
 $(OUTPUT)/get_cgroup_id_user: $(CGROUP_HELPERS) $(TESTING_HELPERS)
@@ -308,6 +309,7 @@ $(OUTPUT)/flow_dissector_load: $(TESTING_HELPERS)
 $(OUTPUT)/test_maps: $(TESTING_HELPERS)
 $(OUTPUT)/test_verifier: $(TESTING_HELPERS) $(CAP_HELPERS) $(UNPRIV_HELPERS)
 $(OUTPUT)/xsk.o: $(BPFOBJ)
+$(OUTPUT)/test_tcp_check_syncookie_user: $(NETWORK_HELPERS)
 
 BPFTOOL ?= $(DEFAULT_BPFTOOL)
 $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile)    \
@@ -442,7 +444,7 @@ endef
 # Build BPF object using GCC
 define GCC_BPF_BUILD_RULE
 	$(call msg,GCC-BPF,$(TRUNNER_BINARY),$2)
-	$(Q)$(BPF_GCC) $3 -O2 -c $1 -o $2
+	$(Q)$(BPF_GCC) $3 -DBPF_NO_PRESERVE_ACCESS_INDEX -Wno-attributes -O2 -c $1 -o $2
 endef
 
 SKEL_BLACKLIST := btf__% test_pinning_invalid.c test_sk_assign.c
@@ -455,7 +457,7 @@ LINKED_SKELS := test_static_linked.skel.h linked_funcs.skel.h		\
 LSKELS := fentry_test.c fexit_test.c fexit_sleep.c atomics.c 		\
 	trace_printk.c trace_vprintk.c map_ptr_kern.c 			\
 	core_kern.c core_kern_overflow.c test_ringbuf.c			\
-	test_ringbuf_map_key.c
+	test_ringbuf_n.c test_ringbuf_map_key.c
 
 # Generate both light skeleton and libbpf skeleton for these
 LSKELS_EXTRA := test_ksyms_module.c test_ksyms_weak.c kfunc_call_test.c \
@@ -481,7 +483,7 @@ LINKED_BPF_SRCS := $(patsubst %.bpf.o,%.c,$(foreach skel,$(LINKED_SKELS),$($(ske
 # $eval()) and pass control to DEFINE_TEST_RUNNER_RULES.
 # Parameters:
 # $1 - test runner base binary name (e.g., test_progs)
-# $2 - test runner extra "flavor" (e.g., no_alu32, cpuv4, gcc-bpf, etc)
+# $2 - test runner extra "flavor" (e.g., no_alu32, cpuv4, bpf_gcc, etc)
 define DEFINE_TEST_RUNNER
 
 TRUNNER_OUTPUT := $(OUTPUT)$(if $2,/)$2
@@ -509,7 +511,7 @@ endef
 # Using TRUNNER_XXX variables, provided by callers of DEFINE_TEST_RUNNER and
 # set up by DEFINE_TEST_RUNNER itself, create test runner build rules with:
 # $1 - test runner base binary name (e.g., test_progs)
-# $2 - test runner extra "flavor" (e.g., no_alu32, cpuv4, gcc-bpf, etc)
+# $2 - test runner extra "flavor" (e.g., no_alu32, cpuv4, bpf_gcc, etc)
 define DEFINE_TEST_RUNNER_RULES
 
 ifeq ($($(TRUNNER_OUTPUT)-dir),)
@@ -532,7 +534,8 @@ $(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.bpf.o:				\
 		     | $(TRUNNER_OUTPUT) $$(BPFOBJ)
 	$$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@,			\
 					  $(TRUNNER_BPF_CFLAGS)         \
-					  $$($$<-CFLAGS))
+					  $$($$<-CFLAGS)		\
+					  $$($$<-$2-CFLAGS))
 
 $(TRUNNER_BPF_SKELS): %.skel.h: %.bpf.o $(BPFTOOL) | $(TRUNNER_OUTPUT)
 	$$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@)
@@ -658,7 +661,7 @@ $(eval $(call DEFINE_TEST_RUNNER,test_progs,no_alu32))
 # Define test_progs-cpuv4 test runner.
 ifneq ($(CLANG_CPUV4),)
 TRUNNER_BPF_BUILD_RULE := CLANG_CPUV4_BPF_BUILD_RULE
-TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS)
+TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS) -DENABLE_ATOMICS_TESTS
 $(eval $(call DEFINE_TEST_RUNNER,test_progs,cpuv4))
 endif
 
@@ -695,7 +698,7 @@ $(OUTPUT)/test_verifier: test_verifier.c verifier/tests.h $(BPFOBJ) | $(OUTPUT)
 
 # Include find_bit.c to compile xskxceiver.
 EXTRA_SRC := $(TOOLSDIR)/lib/find_bit.c
-$(OUTPUT)/xskxceiver: $(EXTRA_SRC) xskxceiver.c xskxceiver.h $(OUTPUT)/xsk.o $(OUTPUT)/xsk_xdp_progs.skel.h $(BPFOBJ) | $(OUTPUT)
+$(OUTPUT)/xskxceiver: $(EXTRA_SRC) xskxceiver.c xskxceiver.h $(OUTPUT)/network_helpers.o $(OUTPUT)/xsk.o $(OUTPUT)/xsk_xdp_progs.skel.h $(BPFOBJ) | $(OUTPUT)
 	$(call msg,BINARY,,$@)
 	$(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@
 
@@ -729,6 +732,7 @@ $(OUTPUT)/bench_local_storage_rcu_tasks_trace.o: $(OUTPUT)/local_storage_rcu_tas
 $(OUTPUT)/bench_local_storage_create.o: $(OUTPUT)/bench_local_storage_create.skel.h
 $(OUTPUT)/bench_bpf_hashmap_lookup.o: $(OUTPUT)/bpf_hashmap_lookup.skel.h
 $(OUTPUT)/bench_htab_mem.o: $(OUTPUT)/htab_mem_bench.skel.h
+$(OUTPUT)/bench_bpf_crypto.o: $(OUTPUT)/crypto_bench.skel.h
 $(OUTPUT)/bench.o: bench.h testing_helpers.h $(BPFOBJ)
 $(OUTPUT)/bench: LDLIBS += -lm
 $(OUTPUT)/bench: $(OUTPUT)/bench.o \
@@ -748,6 +752,7 @@ $(OUTPUT)/bench: $(OUTPUT)/bench.o \
 		 $(OUTPUT)/bench_bpf_hashmap_lookup.o \
 		 $(OUTPUT)/bench_local_storage_create.o \
 		 $(OUTPUT)/bench_htab_mem.o \
+		 $(OUTPUT)/bench_bpf_crypto.o \
 		 #
 	$(call msg,BINARY,,$@)
 	$(Q)$(CC) $(CFLAGS) $(LDFLAGS) $(filter %.a %.o,$^) $(LDLIBS) -o $@
@@ -759,7 +764,7 @@ $(OUTPUT)/veristat: $(OUTPUT)/veristat.o
 
 $(OUTPUT)/uprobe_multi: uprobe_multi.c
 	$(call msg,BINARY,,$@)
-	$(Q)$(CC) $(CFLAGS) $(LDFLAGS) $^ $(LDLIBS) -o $@
+	$(Q)$(CC) $(CFLAGS) -O0 $(LDFLAGS) $^ $(LDLIBS) -o $@
 
 EXTRA_CLEAN := $(SCRATCH_DIR) $(HOST_SCRATCH_DIR)			\
 	prog_tests/tests.h map_tests/tests.h verifier/tests.h		\
diff --git a/tools/testing/selftests/bpf/bench.c b/tools/testing/selftests/bpf/bench.c
index b2b4c391eb0a..627b74ae041b 100644
--- a/tools/testing/selftests/bpf/bench.c
+++ b/tools/testing/selftests/bpf/bench.c
@@ -280,6 +280,8 @@ extern struct argp bench_strncmp_argp;
 extern struct argp bench_hashmap_lookup_argp;
 extern struct argp bench_local_storage_create_argp;
 extern struct argp bench_htab_mem_argp;
+extern struct argp bench_trigger_batch_argp;
+extern struct argp bench_crypto_argp;
 
 static const struct argp_child bench_parsers[] = {
 	{ &bench_ringbufs_argp, 0, "Ring buffers benchmark", 0 },
@@ -292,6 +294,8 @@ static const struct argp_child bench_parsers[] = {
 	{ &bench_hashmap_lookup_argp, 0, "Hashmap lookup benchmark", 0 },
 	{ &bench_local_storage_create_argp, 0, "local-storage-create benchmark", 0 },
 	{ &bench_htab_mem_argp, 0, "hash map memory benchmark", 0 },
+	{ &bench_trigger_batch_argp, 0, "BPF triggering benchmark", 0 },
+	{ &bench_crypto_argp, 0, "bpf crypto benchmark", 0 },
 	{},
 };
 
@@ -491,24 +495,31 @@ extern const struct bench bench_rename_kretprobe;
 extern const struct bench bench_rename_rawtp;
 extern const struct bench bench_rename_fentry;
 extern const struct bench bench_rename_fexit;
-extern const struct bench bench_trig_base;
-extern const struct bench bench_trig_tp;
-extern const struct bench bench_trig_rawtp;
+
+/* pure counting benchmarks to establish theoretical lmits */
+extern const struct bench bench_trig_usermode_count;
+extern const struct bench bench_trig_syscall_count;
+extern const struct bench bench_trig_kernel_count;
+
+/* batched, staying mostly in-kernel benchmarks */
 extern const struct bench bench_trig_kprobe;
 extern const struct bench bench_trig_kretprobe;
 extern const struct bench bench_trig_kprobe_multi;
 extern const struct bench bench_trig_kretprobe_multi;
 extern const struct bench bench_trig_fentry;
 extern const struct bench bench_trig_fexit;
-extern const struct bench bench_trig_fentry_sleep;
 extern const struct bench bench_trig_fmodret;
-extern const struct bench bench_trig_uprobe_base;
+extern const struct bench bench_trig_tp;
+extern const struct bench bench_trig_rawtp;
+
+/* uprobe/uretprobe benchmarks */
 extern const struct bench bench_trig_uprobe_nop;
 extern const struct bench bench_trig_uretprobe_nop;
 extern const struct bench bench_trig_uprobe_push;
 extern const struct bench bench_trig_uretprobe_push;
 extern const struct bench bench_trig_uprobe_ret;
 extern const struct bench bench_trig_uretprobe_ret;
+
 extern const struct bench bench_rb_libbpf;
 extern const struct bench bench_rb_custom;
 extern const struct bench bench_pb_libbpf;
@@ -529,6 +540,8 @@ extern const struct bench bench_local_storage_tasks_trace;
 extern const struct bench bench_bpf_hashmap_lookup;
 extern const struct bench bench_local_storage_create;
 extern const struct bench bench_htab_mem;
+extern const struct bench bench_crypto_encrypt;
+extern const struct bench bench_crypto_decrypt;
 
 static const struct bench *benchs[] = {
 	&bench_count_global,
@@ -539,24 +552,28 @@ static const struct bench *benchs[] = {
 	&bench_rename_rawtp,
 	&bench_rename_fentry,
 	&bench_rename_fexit,
-	&bench_trig_base,
-	&bench_trig_tp,
-	&bench_trig_rawtp,
+	/* pure counting benchmarks for establishing theoretical limits */
+	&bench_trig_usermode_count,
+	&bench_trig_kernel_count,
+	&bench_trig_syscall_count,
+	/* batched, staying mostly in-kernel triggers */
 	&bench_trig_kprobe,
 	&bench_trig_kretprobe,
 	&bench_trig_kprobe_multi,
 	&bench_trig_kretprobe_multi,
 	&bench_trig_fentry,
 	&bench_trig_fexit,
-	&bench_trig_fentry_sleep,
 	&bench_trig_fmodret,
-	&bench_trig_uprobe_base,
+	&bench_trig_tp,
+	&bench_trig_rawtp,
+	/* uprobes */
 	&bench_trig_uprobe_nop,
 	&bench_trig_uretprobe_nop,
 	&bench_trig_uprobe_push,
 	&bench_trig_uretprobe_push,
 	&bench_trig_uprobe_ret,
 	&bench_trig_uretprobe_ret,
+	/* ringbuf/perfbuf benchmarks */
 	&bench_rb_libbpf,
 	&bench_rb_custom,
 	&bench_pb_libbpf,
@@ -577,6 +594,8 @@ static const struct bench *benchs[] = {
 	&bench_bpf_hashmap_lookup,
 	&bench_local_storage_create,
 	&bench_htab_mem,
+	&bench_crypto_encrypt,
+	&bench_crypto_decrypt,
 };
 
 static void find_benchmark(void)
diff --git a/tools/testing/selftests/bpf/benchs/bench_bpf_crypto.c b/tools/testing/selftests/bpf/benchs/bench_bpf_crypto.c
new file mode 100644
index 000000000000..2845edaba8db
--- /dev/null
+++ b/tools/testing/selftests/bpf/benchs/bench_bpf_crypto.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#include <argp.h>
+#include "bench.h"
+#include "crypto_bench.skel.h"
+
+#define MAX_CIPHER_LEN 32
+static char *input;
+static struct crypto_ctx {
+	struct crypto_bench *skel;
+	int pfd;
+} ctx;
+
+static struct crypto_args {
+	u32 crypto_len;
+	char *crypto_cipher;
+} args = {
+	.crypto_len = 16,
+	.crypto_cipher = "ecb(aes)",
+};
+
+enum {
+	ARG_CRYPTO_LEN = 5000,
+	ARG_CRYPTO_CIPHER = 5001,
+};
+
+static const struct argp_option opts[] = {
+	{ "crypto-len", ARG_CRYPTO_LEN, "CRYPTO_LEN", 0,
+	  "Set the length of crypto buffer" },
+	{ "crypto-cipher", ARG_CRYPTO_CIPHER, "CRYPTO_CIPHER", 0,
+	  "Set the cipher to use (default:ecb(aes))" },
+	{},
+};
+
+static error_t crypto_parse_arg(int key, char *arg, struct argp_state *state)
+{
+	switch (key) {
+	case ARG_CRYPTO_LEN:
+		args.crypto_len = strtoul(arg, NULL, 10);
+		if (!args.crypto_len ||
+		    args.crypto_len > sizeof(ctx.skel->bss->dst)) {
+			fprintf(stderr, "Invalid crypto buffer len (limit %zu)\n",
+				sizeof(ctx.skel->bss->dst));
+			argp_usage(state);
+		}
+		break;
+	case ARG_CRYPTO_CIPHER:
+		args.crypto_cipher = strdup(arg);
+		if (!strlen(args.crypto_cipher) ||
+		    strlen(args.crypto_cipher) > MAX_CIPHER_LEN) {
+			fprintf(stderr, "Invalid crypto cipher len (limit %d)\n",
+				MAX_CIPHER_LEN);
+			argp_usage(state);
+		}
+		break;
+	default:
+		return ARGP_ERR_UNKNOWN;
+	}
+
+	return 0;
+}
+
+const struct argp bench_crypto_argp = {
+	.options = opts,
+	.parser = crypto_parse_arg,
+};
+
+static void crypto_validate(void)
+{
+	if (env.consumer_cnt != 0) {
+		fprintf(stderr, "bpf crypto benchmark doesn't support consumer!\n");
+		exit(1);
+	}
+}
+
+static void crypto_setup(void)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, opts);
+
+	int err, pfd;
+	size_t i, sz;
+
+	sz = args.crypto_len;
+	if (!sz || sz > sizeof(ctx.skel->bss->dst)) {
+		fprintf(stderr, "invalid encrypt buffer size (source %zu, target %zu)\n",
+			sz, sizeof(ctx.skel->bss->dst));
+		exit(1);
+	}
+
+	setup_libbpf();
+
+	ctx.skel = crypto_bench__open();
+	if (!ctx.skel) {
+		fprintf(stderr, "failed to open skeleton\n");
+		exit(1);
+	}
+
+	snprintf(ctx.skel->bss->cipher, 128, "%s", args.crypto_cipher);
+	memcpy(ctx.skel->bss->key, "12345678testtest", 16);
+	ctx.skel->bss->key_len = 16;
+	ctx.skel->bss->authsize = 0;
+
+	srandom(time(NULL));
+	input = malloc(sz);
+	for (i = 0; i < sz - 1; i++)
+		input[i] = '1' + random() % 9;
+	input[sz - 1] = '\0';
+
+	ctx.skel->rodata->len = args.crypto_len;
+
+	err = crypto_bench__load(ctx.skel);
+	if (err) {
+		fprintf(stderr, "failed to load skeleton\n");
+		crypto_bench__destroy(ctx.skel);
+		exit(1);
+	}
+
+	pfd = bpf_program__fd(ctx.skel->progs.crypto_setup);
+	if (pfd < 0) {
+		fprintf(stderr, "failed to get fd for setup prog\n");
+		crypto_bench__destroy(ctx.skel);
+		exit(1);
+	}
+
+	err = bpf_prog_test_run_opts(pfd, &opts);
+	if (err || ctx.skel->bss->status) {
+		fprintf(stderr, "failed to run setup prog: err %d, status %d\n",
+			err, ctx.skel->bss->status);
+		crypto_bench__destroy(ctx.skel);
+		exit(1);
+	}
+}
+
+static void crypto_encrypt_setup(void)
+{
+	crypto_setup();
+	ctx.pfd = bpf_program__fd(ctx.skel->progs.crypto_encrypt);
+}
+
+static void crypto_decrypt_setup(void)
+{
+	crypto_setup();
+	ctx.pfd = bpf_program__fd(ctx.skel->progs.crypto_decrypt);
+}
+
+static void crypto_measure(struct bench_res *res)
+{
+	res->hits = atomic_swap(&ctx.skel->bss->hits, 0);
+}
+
+static void *crypto_producer(void *unused)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, opts,
+		.repeat = 64,
+		.data_in = input,
+		.data_size_in = args.crypto_len,
+	);
+
+	while (true)
+		(void)bpf_prog_test_run_opts(ctx.pfd, &opts);
+	return NULL;
+}
+
+const struct bench bench_crypto_encrypt = {
+	.name = "crypto-encrypt",
+	.argp = &bench_crypto_argp,
+	.validate = crypto_validate,
+	.setup = crypto_encrypt_setup,
+	.producer_thread = crypto_producer,
+	.measure = crypto_measure,
+	.report_progress = hits_drops_report_progress,
+	.report_final = hits_drops_report_final,
+};
+
+const struct bench bench_crypto_decrypt = {
+	.name = "crypto-decrypt",
+	.argp = &bench_crypto_argp,
+	.validate = crypto_validate,
+	.setup = crypto_decrypt_setup,
+	.producer_thread = crypto_producer,
+	.measure = crypto_measure,
+	.report_progress = hits_drops_report_progress,
+	.report_final = hits_drops_report_final,
+};
diff --git a/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c b/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c
index b36de42ee4d9..e2ff8ea1cb79 100644
--- a/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c
+++ b/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c
@@ -186,7 +186,7 @@ static void *task_producer(void *input)
 
 		for (i = 0; i < batch_sz; i++) {
 			if (!pthd_results[i])
-				pthread_join(pthds[i], NULL);;
+				pthread_join(pthds[i], NULL);
 		}
 	}
 
diff --git a/tools/testing/selftests/bpf/benchs/bench_trigger.c b/tools/testing/selftests/bpf/benchs/bench_trigger.c
index ace0d1011a8e..4b05539f167d 100644
--- a/tools/testing/selftests/bpf/benchs/bench_trigger.c
+++ b/tools/testing/selftests/bpf/benchs/bench_trigger.c
@@ -1,15 +1,95 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright (c) 2020 Facebook */
+#define _GNU_SOURCE
+#include <argp.h>
+#include <unistd.h>
+#include <stdint.h>
 #include "bench.h"
 #include "trigger_bench.skel.h"
 #include "trace_helpers.h"
 
+#define MAX_TRIG_BATCH_ITERS 1000
+
+static struct {
+	__u32 batch_iters;
+} args = {
+	.batch_iters = 100,
+};
+
+enum {
+	ARG_TRIG_BATCH_ITERS = 7000,
+};
+
+static const struct argp_option opts[] = {
+	{ "trig-batch-iters", ARG_TRIG_BATCH_ITERS, "BATCH_ITER_CNT", 0,
+		"Number of in-kernel iterations per one driver test run"},
+	{},
+};
+
+static error_t parse_arg(int key, char *arg, struct argp_state *state)
+{
+	long ret;
+
+	switch (key) {
+	case ARG_TRIG_BATCH_ITERS:
+		ret = strtol(arg, NULL, 10);
+		if (ret < 1 || ret > MAX_TRIG_BATCH_ITERS) {
+			fprintf(stderr, "invalid --trig-batch-iters value (should be between %d and %d)\n",
+				1, MAX_TRIG_BATCH_ITERS);
+			argp_usage(state);
+		}
+		args.batch_iters = ret;
+		break;
+	default:
+		return ARGP_ERR_UNKNOWN;
+	}
+
+	return 0;
+}
+
+const struct argp bench_trigger_batch_argp = {
+	.options = opts,
+	.parser = parse_arg,
+};
+
+/* adjust slot shift in inc_hits() if changing */
+#define MAX_BUCKETS 256
+
+#pragma GCC diagnostic ignored "-Wattributes"
+
 /* BPF triggering benchmarks */
 static struct trigger_ctx {
 	struct trigger_bench *skel;
+	bool usermode_counters;
+	int driver_prog_fd;
 } ctx;
 
-static struct counter base_hits;
+static struct counter base_hits[MAX_BUCKETS];
+
+static __always_inline void inc_counter(struct counter *counters)
+{
+	static __thread int tid = 0;
+	unsigned slot;
+
+	if (unlikely(tid == 0))
+		tid = syscall(SYS_gettid);
+
+	/* multiplicative hashing, it's fast */
+	slot = 2654435769U * tid;
+	slot >>= 24;
+
+	atomic_inc(&base_hits[slot].value); /* use highest byte as an index */
+}
+
+static long sum_and_reset_counters(struct counter *counters)
+{
+	int i;
+	long sum = 0;
+
+	for (i = 0; i < MAX_BUCKETS; i++)
+		sum += atomic_swap(&counters[i].value, 0);
+	return sum;
+}
 
 static void trigger_validate(void)
 {
@@ -19,41 +99,63 @@ static void trigger_validate(void)
 	}
 }
 
-static void *trigger_base_producer(void *input)
+static void *trigger_producer(void *input)
 {
-	while (true) {
-		(void)syscall(__NR_getpgid);
-		atomic_inc(&base_hits.value);
+	if (ctx.usermode_counters) {
+		while (true) {
+			(void)syscall(__NR_getpgid);
+			inc_counter(base_hits);
+		}
+	} else {
+		while (true)
+			(void)syscall(__NR_getpgid);
 	}
 	return NULL;
 }
 
-static void trigger_base_measure(struct bench_res *res)
+static void *trigger_producer_batch(void *input)
 {
-	res->hits = atomic_swap(&base_hits.value, 0);
-}
+	int fd = ctx.driver_prog_fd ?: bpf_program__fd(ctx.skel->progs.trigger_driver);
 
-static void *trigger_producer(void *input)
-{
 	while (true)
-		(void)syscall(__NR_getpgid);
+		bpf_prog_test_run_opts(fd, NULL);
+
 	return NULL;
 }
 
 static void trigger_measure(struct bench_res *res)
 {
-	res->hits = atomic_swap(&ctx.skel->bss->hits, 0);
+	if (ctx.usermode_counters)
+		res->hits = sum_and_reset_counters(base_hits);
+	else
+		res->hits = sum_and_reset_counters(ctx.skel->bss->hits);
 }
 
 static void setup_ctx(void)
 {
 	setup_libbpf();
 
-	ctx.skel = trigger_bench__open_and_load();
+	ctx.skel = trigger_bench__open();
 	if (!ctx.skel) {
 		fprintf(stderr, "failed to open skeleton\n");
 		exit(1);
 	}
+
+	/* default "driver" BPF program */
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver, true);
+
+	ctx.skel->rodata->batch_iters = args.batch_iters;
+}
+
+static void load_ctx(void)
+{
+	int err;
+
+	err = trigger_bench__load(ctx.skel);
+	if (err) {
+		fprintf(stderr, "failed to open skeleton\n");
+		exit(1);
+	}
 }
 
 static void attach_bpf(struct bpf_program *prog)
@@ -67,64 +169,104 @@ static void attach_bpf(struct bpf_program *prog)
 	}
 }
 
-static void trigger_tp_setup(void)
+static void trigger_syscall_count_setup(void)
 {
-	setup_ctx();
-	attach_bpf(ctx.skel->progs.bench_trigger_tp);
+	ctx.usermode_counters = true;
 }
 
-static void trigger_rawtp_setup(void)
+/* Batched, staying mostly in-kernel triggering setups */
+static void trigger_kernel_count_setup(void)
 {
 	setup_ctx();
-	attach_bpf(ctx.skel->progs.bench_trigger_raw_tp);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver, false);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_count, true);
+	load_ctx();
+	/* override driver program */
+	ctx.driver_prog_fd = bpf_program__fd(ctx.skel->progs.trigger_count);
 }
 
 static void trigger_kprobe_setup(void)
 {
 	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_kprobe, true);
+	load_ctx();
 	attach_bpf(ctx.skel->progs.bench_trigger_kprobe);
 }
 
 static void trigger_kretprobe_setup(void)
 {
 	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_kretprobe, true);
+	load_ctx();
 	attach_bpf(ctx.skel->progs.bench_trigger_kretprobe);
 }
 
 static void trigger_kprobe_multi_setup(void)
 {
 	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_kprobe_multi, true);
+	load_ctx();
 	attach_bpf(ctx.skel->progs.bench_trigger_kprobe_multi);
 }
 
 static void trigger_kretprobe_multi_setup(void)
 {
 	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_kretprobe_multi, true);
+	load_ctx();
 	attach_bpf(ctx.skel->progs.bench_trigger_kretprobe_multi);
 }
 
 static void trigger_fentry_setup(void)
 {
 	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_fentry, true);
+	load_ctx();
 	attach_bpf(ctx.skel->progs.bench_trigger_fentry);
 }
 
 static void trigger_fexit_setup(void)
 {
 	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_fexit, true);
+	load_ctx();
 	attach_bpf(ctx.skel->progs.bench_trigger_fexit);
 }
 
-static void trigger_fentry_sleep_setup(void)
+static void trigger_fmodret_setup(void)
 {
 	setup_ctx();
-	attach_bpf(ctx.skel->progs.bench_trigger_fentry_sleep);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver, false);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver_kfunc, true);
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_fmodret, true);
+	load_ctx();
+	/* override driver program */
+	ctx.driver_prog_fd = bpf_program__fd(ctx.skel->progs.trigger_driver_kfunc);
+	attach_bpf(ctx.skel->progs.bench_trigger_fmodret);
 }
 
-static void trigger_fmodret_setup(void)
+static void trigger_tp_setup(void)
 {
 	setup_ctx();
-	attach_bpf(ctx.skel->progs.bench_trigger_fmodret);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver, false);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver_kfunc, true);
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_tp, true);
+	load_ctx();
+	/* override driver program */
+	ctx.driver_prog_fd = bpf_program__fd(ctx.skel->progs.trigger_driver_kfunc);
+	attach_bpf(ctx.skel->progs.bench_trigger_tp);
+}
+
+static void trigger_rawtp_setup(void)
+{
+	setup_ctx();
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver, false);
+	bpf_program__set_autoload(ctx.skel->progs.trigger_driver_kfunc, true);
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_rawtp, true);
+	load_ctx();
+	/* override driver program */
+	ctx.driver_prog_fd = bpf_program__fd(ctx.skel->progs.trigger_driver_kfunc);
+	attach_bpf(ctx.skel->progs.bench_trigger_rawtp);
 }
 
 /* make sure call is not inlined and not avoided by compiler, so __weak and
@@ -137,7 +279,7 @@ static void trigger_fmodret_setup(void)
  * GCC doesn't generate stack setup preample for these functions due to them
  * having no input arguments and doing nothing in the body.
  */
-__weak void uprobe_target_nop(void)
+__nocf_check __weak void uprobe_target_nop(void)
 {
 	asm volatile ("nop");
 }
@@ -146,7 +288,7 @@ __weak void opaque_noop_func(void)
 {
 }
 
-__weak int uprobe_target_push(void)
+__nocf_check __weak int uprobe_target_push(void)
 {
 	/* overhead of function call is negligible compared to uprobe
 	 * triggering, so this shouldn't affect benchmark results much
@@ -155,16 +297,16 @@ __weak int uprobe_target_push(void)
 	return 1;
 }
 
-__weak void uprobe_target_ret(void)
+__nocf_check __weak void uprobe_target_ret(void)
 {
 	asm volatile ("");
 }
 
-static void *uprobe_base_producer(void *input)
+static void *uprobe_producer_count(void *input)
 {
 	while (true) {
 		uprobe_target_nop();
-		atomic_inc(&base_hits.value);
+		inc_counter(base_hits);
 	}
 	return NULL;
 }
@@ -194,15 +336,24 @@ static void usetup(bool use_retprobe, void *target_addr)
 {
 	size_t uprobe_offset;
 	struct bpf_link *link;
+	int err;
 
 	setup_libbpf();
 
-	ctx.skel = trigger_bench__open_and_load();
+	ctx.skel = trigger_bench__open();
 	if (!ctx.skel) {
 		fprintf(stderr, "failed to open skeleton\n");
 		exit(1);
 	}
 
+	bpf_program__set_autoload(ctx.skel->progs.bench_trigger_uprobe, true);
+
+	err = trigger_bench__load(ctx.skel);
+	if (err) {
+		fprintf(stderr, "failed to load skeleton\n");
+		exit(1);
+	}
+
 	uprobe_offset = get_uprobe_offset(target_addr);
 	link = bpf_program__attach_uprobe(ctx.skel->progs.bench_trigger_uprobe,
 					  use_retprobe,
@@ -216,204 +367,90 @@ static void usetup(bool use_retprobe, void *target_addr)
 	ctx.skel->links.bench_trigger_uprobe = link;
 }
 
-static void uprobe_setup_nop(void)
+static void usermode_count_setup(void)
+{
+	ctx.usermode_counters = true;
+}
+
+static void uprobe_nop_setup(void)
 {
 	usetup(false, &uprobe_target_nop);
 }
 
-static void uretprobe_setup_nop(void)
+static void uretprobe_nop_setup(void)
 {
 	usetup(true, &uprobe_target_nop);
 }
 
-static void uprobe_setup_push(void)
+static void uprobe_push_setup(void)
 {
 	usetup(false, &uprobe_target_push);
 }
 
-static void uretprobe_setup_push(void)
+static void uretprobe_push_setup(void)
 {
 	usetup(true, &uprobe_target_push);
 }
 
-static void uprobe_setup_ret(void)
+static void uprobe_ret_setup(void)
 {
 	usetup(false, &uprobe_target_ret);
 }
 
-static void uretprobe_setup_ret(void)
+static void uretprobe_ret_setup(void)
 {
 	usetup(true, &uprobe_target_ret);
 }
 
-const struct bench bench_trig_base = {
-	.name = "trig-base",
+const struct bench bench_trig_syscall_count = {
+	.name = "trig-syscall-count",
 	.validate = trigger_validate,
-	.producer_thread = trigger_base_producer,
-	.measure = trigger_base_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_tp = {
-	.name = "trig-tp",
-	.validate = trigger_validate,
-	.setup = trigger_tp_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_rawtp = {
-	.name = "trig-rawtp",
-	.validate = trigger_validate,
-	.setup = trigger_rawtp_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_kprobe = {
-	.name = "trig-kprobe",
-	.validate = trigger_validate,
-	.setup = trigger_kprobe_setup,
+	.setup = trigger_syscall_count_setup,
 	.producer_thread = trigger_producer,
 	.measure = trigger_measure,
 	.report_progress = hits_drops_report_progress,
 	.report_final = hits_drops_report_final,
 };
 
-const struct bench bench_trig_kretprobe = {
-	.name = "trig-kretprobe",
-	.validate = trigger_validate,
-	.setup = trigger_kretprobe_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_kprobe_multi = {
-	.name = "trig-kprobe-multi",
-	.validate = trigger_validate,
-	.setup = trigger_kprobe_multi_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_kretprobe_multi = {
-	.name = "trig-kretprobe-multi",
-	.validate = trigger_validate,
-	.setup = trigger_kretprobe_multi_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_fentry = {
-	.name = "trig-fentry",
-	.validate = trigger_validate,
-	.setup = trigger_fentry_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_fexit = {
-	.name = "trig-fexit",
-	.validate = trigger_validate,
-	.setup = trigger_fexit_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_fentry_sleep = {
-	.name = "trig-fentry-sleep",
-	.validate = trigger_validate,
-	.setup = trigger_fentry_sleep_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_fmodret = {
-	.name = "trig-fmodret",
-	.validate = trigger_validate,
-	.setup = trigger_fmodret_setup,
-	.producer_thread = trigger_producer,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uprobe_base = {
-	.name = "trig-uprobe-base",
-	.setup = NULL, /* no uprobe/uretprobe is attached */
-	.producer_thread = uprobe_base_producer,
-	.measure = trigger_base_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uprobe_nop = {
-	.name = "trig-uprobe-nop",
-	.setup = uprobe_setup_nop,
-	.producer_thread = uprobe_producer_nop,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uretprobe_nop = {
-	.name = "trig-uretprobe-nop",
-	.setup = uretprobe_setup_nop,
-	.producer_thread = uprobe_producer_nop,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uprobe_push = {
-	.name = "trig-uprobe-push",
-	.setup = uprobe_setup_push,
-	.producer_thread = uprobe_producer_push,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uretprobe_push = {
-	.name = "trig-uretprobe-push",
-	.setup = uretprobe_setup_push,
-	.producer_thread = uprobe_producer_push,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uprobe_ret = {
-	.name = "trig-uprobe-ret",
-	.setup = uprobe_setup_ret,
-	.producer_thread = uprobe_producer_ret,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
-
-const struct bench bench_trig_uretprobe_ret = {
-	.name = "trig-uretprobe-ret",
-	.setup = uretprobe_setup_ret,
-	.producer_thread = uprobe_producer_ret,
-	.measure = trigger_measure,
-	.report_progress = hits_drops_report_progress,
-	.report_final = hits_drops_report_final,
-};
+/* batched (staying mostly in kernel) kprobe/fentry benchmarks */
+#define BENCH_TRIG_KERNEL(KIND, NAME)					\
+const struct bench bench_trig_##KIND = {				\
+	.name = "trig-" NAME,						\
+	.setup = trigger_##KIND##_setup,				\
+	.producer_thread = trigger_producer_batch,			\
+	.measure = trigger_measure,					\
+	.report_progress = hits_drops_report_progress,			\
+	.report_final = hits_drops_report_final,			\
+	.argp = &bench_trigger_batch_argp,				\
+}
+
+BENCH_TRIG_KERNEL(kernel_count, "kernel-count");
+BENCH_TRIG_KERNEL(kprobe, "kprobe");
+BENCH_TRIG_KERNEL(kretprobe, "kretprobe");
+BENCH_TRIG_KERNEL(kprobe_multi, "kprobe-multi");
+BENCH_TRIG_KERNEL(kretprobe_multi, "kretprobe-multi");
+BENCH_TRIG_KERNEL(fentry, "fentry");
+BENCH_TRIG_KERNEL(fexit, "fexit");
+BENCH_TRIG_KERNEL(fmodret, "fmodret");
+BENCH_TRIG_KERNEL(tp, "tp");
+BENCH_TRIG_KERNEL(rawtp, "rawtp");
+
+/* uprobe benchmarks */
+#define BENCH_TRIG_USERMODE(KIND, PRODUCER, NAME)			\
+const struct bench bench_trig_##KIND = {				\
+	.name = "trig-" NAME,						\
+	.validate = trigger_validate,					\
+	.setup = KIND##_setup,						\
+	.producer_thread = uprobe_producer_##PRODUCER,			\
+	.measure = trigger_measure,					\
+	.report_progress = hits_drops_report_progress,			\
+	.report_final = hits_drops_report_final,			\
+}
+
+BENCH_TRIG_USERMODE(usermode_count, count, "usermode-count");
+BENCH_TRIG_USERMODE(uprobe_nop, nop, "uprobe-nop");
+BENCH_TRIG_USERMODE(uprobe_push, push, "uprobe-push");
+BENCH_TRIG_USERMODE(uprobe_ret, ret, "uprobe-ret");
+BENCH_TRIG_USERMODE(uretprobe_nop, nop, "uretprobe-nop");
+BENCH_TRIG_USERMODE(uretprobe_push, push, "uretprobe-push");
+BENCH_TRIG_USERMODE(uretprobe_ret, ret, "uretprobe-ret");
diff --git a/tools/testing/selftests/bpf/benchs/run_bench_trigger.sh b/tools/testing/selftests/bpf/benchs/run_bench_trigger.sh
index 78e83f243294..a690f5a68b6b 100755
--- a/tools/testing/selftests/bpf/benchs/run_bench_trigger.sh
+++ b/tools/testing/selftests/bpf/benchs/run_bench_trigger.sh
@@ -2,8 +2,22 @@
 
 set -eufo pipefail
 
-for i in base tp rawtp kprobe fentry fmodret
-do
-	summary=$(sudo ./bench -w2 -d5 -a trig-$i | tail -n1 | cut -d'(' -f1 | cut -d' ' -f3-)
-	printf "%-10s: %s\n" $i "$summary"
+def_tests=( \
+	usermode-count kernel-count syscall-count \
+	fentry fexit fmodret \
+	rawtp tp \
+	kprobe kprobe-multi \
+	kretprobe kretprobe-multi \
+)
+
+tests=("$@")
+if [ ${#tests[@]} -eq 0 ]; then
+	tests=("${def_tests[@]}")
+fi
+
+p=${PROD_CNT:-1}
+
+for t in "${tests[@]}"; do
+	summary=$(sudo ./bench -w2 -d5 -a -p$p trig-$t | tail -n1 | cut -d'(' -f1 | cut -d' ' -f3-)
+	printf "%-15s: %s\n" $t "$summary"
 done
diff --git a/tools/testing/selftests/bpf/benchs/run_bench_uprobes.sh b/tools/testing/selftests/bpf/benchs/run_bench_uprobes.sh
index 9bdcc74e03a4..af169f831f2f 100755
--- a/tools/testing/selftests/bpf/benchs/run_bench_uprobes.sh
+++ b/tools/testing/selftests/bpf/benchs/run_bench_uprobes.sh
@@ -2,7 +2,7 @@
 
 set -eufo pipefail
 
-for i in base {uprobe,uretprobe}-{nop,push,ret}
+for i in usermode-count syscall-count {uprobe,uretprobe}-{nop,push,ret}
 do
 	summary=$(sudo ./bench -w2 -d5 -a trig-$i | tail -n1 | cut -d'(' -f1 | cut -d' ' -f3-)
 	printf "%-15s: %s\n" $i "$summary"
diff --git a/tools/testing/selftests/bpf/bpf_arena_list.h b/tools/testing/selftests/bpf/bpf_arena_list.h
index b99b9f408eff..85dbc3ea4da5 100644
--- a/tools/testing/selftests/bpf/bpf_arena_list.h
+++ b/tools/testing/selftests/bpf/bpf_arena_list.h
@@ -29,6 +29,7 @@ static inline void *bpf_iter_num_new(struct bpf_iter_num *it, int i, int j) { re
 static inline void bpf_iter_num_destroy(struct bpf_iter_num *it) {}
 static inline bool bpf_iter_num_next(struct bpf_iter_num *it) { return true; }
 #define cond_break ({})
+#define can_loop true
 #endif
 
 /* Safely walk link list elements. Deletion of elements is allowed. */
@@ -36,8 +37,7 @@ static inline bool bpf_iter_num_next(struct bpf_iter_num *it) { return true; }
 	for (void * ___tmp = (pos = list_entry_safe((head)->first,		\
 						    typeof(*(pos)), member),	\
 			      (void *)0);					\
-	     pos && ({ ___tmp = (void *)pos->member.next; 1; });		\
-	     cond_break,							\
+	     pos && ({ ___tmp = (void *)pos->member.next; 1; }) && can_loop;    \
 	     pos = list_entry_safe((void __arena *)___tmp, typeof(*(pos)), member))
 
 static inline void list_add_head(arena_list_node_t *n, arena_list_head_t *h)
diff --git a/tools/testing/selftests/bpf/bpf_experimental.h b/tools/testing/selftests/bpf/bpf_experimental.h
index a5b9df38c162..3d9e4b8c6b81 100644
--- a/tools/testing/selftests/bpf/bpf_experimental.h
+++ b/tools/testing/selftests/bpf/bpf_experimental.h
@@ -326,9 +326,48 @@ l_true:												\
        })
 #endif
 
+/*
+ * Note that cond_break can only be portably used in the body of a breakable
+ * construct, whereas can_loop can be used anywhere.
+ */
+#ifdef __BPF_FEATURE_MAY_GOTO
+#define can_loop					\
+	({ __label__ l_break, l_continue;		\
+	bool ret = true;				\
+	asm volatile goto("may_goto %l[l_break]"	\
+		      :::: l_break);			\
+	goto l_continue;				\
+	l_break: ret = false;				\
+	l_continue:;					\
+	ret;						\
+	})
+
+#define cond_break					\
+	({ __label__ l_break, l_continue;		\
+	asm volatile goto("may_goto %l[l_break]"	\
+		      :::: l_break);			\
+	goto l_continue;				\
+	l_break: break;					\
+	l_continue:;					\
+	})
+#else
+#define can_loop					\
+	({ __label__ l_break, l_continue;		\
+	bool ret = true;				\
+	asm volatile goto("1:.byte 0xe5;		\
+		      .byte 0;				\
+		      .long ((%l[l_break] - 1b - 8) / 8) & 0xffff;	\
+		      .short 0"				\
+		      :::: l_break);			\
+	goto l_continue;				\
+	l_break: ret = false;				\
+	l_continue:;					\
+	ret;						\
+	})
+
 #define cond_break					\
 	({ __label__ l_break, l_continue;		\
-	 asm volatile goto("1:.byte 0xe5;			\
+	asm volatile goto("1:.byte 0xe5;		\
 		      .byte 0;				\
 		      .long ((%l[l_break] - 1b - 8) / 8) & 0xffff;	\
 		      .short 0"				\
@@ -337,6 +376,7 @@ l_true:												\
 	l_break: break;					\
 	l_continue:;					\
 	})
+#endif
 
 #ifndef bpf_nop_mov
 #define bpf_nop_mov(var) \
@@ -386,6 +426,28 @@ l_true:												\
 		     , [as]"i"((dst_as << 16) | src_as));
 #endif
 
+void bpf_preempt_disable(void) __weak __ksym;
+void bpf_preempt_enable(void) __weak __ksym;
+
+typedef struct {
+} __bpf_preempt_t;
+
+static inline __bpf_preempt_t __bpf_preempt_constructor(void)
+{
+	__bpf_preempt_t ret = {};
+
+	bpf_preempt_disable();
+	return ret;
+}
+static inline void __bpf_preempt_destructor(__bpf_preempt_t *t)
+{
+	bpf_preempt_enable();
+}
+#define bpf_guard_preempt() \
+	__bpf_preempt_t ___bpf_apply(preempt, __COUNTER__)			\
+	__attribute__((__unused__, __cleanup__(__bpf_preempt_destructor))) =	\
+	__bpf_preempt_constructor()
+
 /* Description
  *	Assert that a conditional expression is true.
  * Returns
@@ -459,4 +521,11 @@ extern int bpf_iter_css_new(struct bpf_iter_css *it,
 extern struct cgroup_subsys_state *bpf_iter_css_next(struct bpf_iter_css *it) __weak __ksym;
 extern void bpf_iter_css_destroy(struct bpf_iter_css *it) __weak __ksym;
 
+extern int bpf_wq_init(struct bpf_wq *wq, void *p__map, unsigned int flags) __weak __ksym;
+extern int bpf_wq_start(struct bpf_wq *wq, unsigned int flags) __weak __ksym;
+extern int bpf_wq_set_callback_impl(struct bpf_wq *wq,
+		int (callback_fn)(void *map, int *key, struct bpf_wq *wq),
+		unsigned int flags__k, void *aux__ign) __ksym;
+#define bpf_wq_set_callback(timer, cb, flags) \
+	bpf_wq_set_callback_impl(timer, cb, flags, NULL)
 #endif
diff --git a/tools/testing/selftests/bpf/bpf_kfuncs.h b/tools/testing/selftests/bpf/bpf_kfuncs.h
index 14ebe7d9e1a3..be91a6919315 100644
--- a/tools/testing/selftests/bpf/bpf_kfuncs.h
+++ b/tools/testing/selftests/bpf/bpf_kfuncs.h
@@ -75,4 +75,7 @@ extern void bpf_key_put(struct bpf_key *key) __ksym;
 extern int bpf_verify_pkcs7_signature(struct bpf_dynptr *data_ptr,
 				      struct bpf_dynptr *sig_ptr,
 				      struct bpf_key *trusted_keyring) __ksym;
+
+extern bool bpf_session_is_return(void) __ksym __weak;
+extern long *bpf_session_cookie(void) __ksym __weak;
 #endif
diff --git a/tools/testing/selftests/bpf/bpf_tcp_helpers.h b/tools/testing/selftests/bpf/bpf_tcp_helpers.h
deleted file mode 100644
index 82a7c9de95f9..000000000000
--- a/tools/testing/selftests/bpf/bpf_tcp_helpers.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __BPF_TCP_HELPERS_H
-#define __BPF_TCP_HELPERS_H
-
-#include <stdbool.h>
-#include <linux/types.h>
-#include <bpf/bpf_helpers.h>
-#include <bpf/bpf_core_read.h>
-#include <bpf/bpf_tracing.h>
-
-#define BPF_STRUCT_OPS(name, args...) \
-SEC("struct_ops/"#name) \
-BPF_PROG(name, args)
-
-#ifndef SOL_TCP
-#define SOL_TCP 6
-#endif
-
-#ifndef TCP_CA_NAME_MAX
-#define TCP_CA_NAME_MAX	16
-#endif
-
-#define tcp_jiffies32 ((__u32)bpf_jiffies64())
-
-struct sock_common {
-	unsigned char	skc_state;
-	__u16		skc_num;
-} __attribute__((preserve_access_index));
-
-enum sk_pacing {
-	SK_PACING_NONE		= 0,
-	SK_PACING_NEEDED	= 1,
-	SK_PACING_FQ		= 2,
-};
-
-struct sock {
-	struct sock_common	__sk_common;
-#define sk_state		__sk_common.skc_state
-	unsigned long		sk_pacing_rate;
-	__u32			sk_pacing_status; /* see enum sk_pacing */
-} __attribute__((preserve_access_index));
-
-struct inet_sock {
-	struct sock		sk;
-} __attribute__((preserve_access_index));
-
-struct inet_connection_sock {
-	struct inet_sock	  icsk_inet;
-	__u8			  icsk_ca_state:6,
-				  icsk_ca_setsockopt:1,
-				  icsk_ca_dst_locked:1;
-	struct {
-		__u8		  pending;
-	} icsk_ack;
-	__u64			  icsk_ca_priv[104 / sizeof(__u64)];
-} __attribute__((preserve_access_index));
-
-struct request_sock {
-	struct sock_common		__req_common;
-} __attribute__((preserve_access_index));
-
-struct tcp_sock {
-	struct inet_connection_sock	inet_conn;
-
-	__u32	rcv_nxt;
-	__u32	snd_nxt;
-	__u32	snd_una;
-	__u32	window_clamp;
-	__u8	ecn_flags;
-	__u32	delivered;
-	__u32	delivered_ce;
-	__u32	snd_cwnd;
-	__u32	snd_cwnd_cnt;
-	__u32	snd_cwnd_clamp;
-	__u32	snd_ssthresh;
-	__u8	syn_data:1,	/* SYN includes data */
-		syn_fastopen:1,	/* SYN includes Fast Open option */
-		syn_fastopen_exp:1,/* SYN includes Fast Open exp. option */
-		syn_fastopen_ch:1, /* Active TFO re-enabling probe */
-		syn_data_acked:1,/* data in SYN is acked by SYN-ACK */
-		save_syn:1,	/* Save headers of SYN packet */
-		is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */
-		syn_smc:1;	/* SYN includes SMC */
-	__u32	max_packets_out;
-	__u32	lsndtime;
-	__u32	prior_cwnd;
-	__u64	tcp_mstamp;	/* most recent packet received/sent */
-	bool	is_mptcp;
-} __attribute__((preserve_access_index));
-
-static __always_inline struct inet_connection_sock *inet_csk(const struct sock *sk)
-{
-	return (struct inet_connection_sock *)sk;
-}
-
-static __always_inline void *inet_csk_ca(const struct sock *sk)
-{
-	return (void *)inet_csk(sk)->icsk_ca_priv;
-}
-
-static __always_inline struct tcp_sock *tcp_sk(const struct sock *sk)
-{
-	return (struct tcp_sock *)sk;
-}
-
-static __always_inline bool before(__u32 seq1, __u32 seq2)
-{
-	return (__s32)(seq1-seq2) < 0;
-}
-#define after(seq2, seq1) 	before(seq1, seq2)
-
-#define	TCP_ECN_OK		1
-#define	TCP_ECN_QUEUE_CWR	2
-#define	TCP_ECN_DEMAND_CWR	4
-#define	TCP_ECN_SEEN		8
-
-enum inet_csk_ack_state_t {
-	ICSK_ACK_SCHED	= 1,
-	ICSK_ACK_TIMER  = 2,
-	ICSK_ACK_PUSHED = 4,
-	ICSK_ACK_PUSHED2 = 8,
-	ICSK_ACK_NOW = 16	/* Send the next ACK immediately (once) */
-};
-
-enum tcp_ca_event {
-	CA_EVENT_TX_START = 0,
-	CA_EVENT_CWND_RESTART = 1,
-	CA_EVENT_COMPLETE_CWR = 2,
-	CA_EVENT_LOSS = 3,
-	CA_EVENT_ECN_NO_CE = 4,
-	CA_EVENT_ECN_IS_CE = 5,
-};
-
-struct ack_sample {
-	__u32 pkts_acked;
-	__s32 rtt_us;
-	__u32 in_flight;
-} __attribute__((preserve_access_index));
-
-struct rate_sample {
-	__u64  prior_mstamp; /* starting timestamp for interval */
-	__u32  prior_delivered;	/* tp->delivered at "prior_mstamp" */
-	__s32  delivered;		/* number of packets delivered over interval */
-	long interval_us;	/* time for tp->delivered to incr "delivered" */
-	__u32 snd_interval_us;	/* snd interval for delivered packets */
-	__u32 rcv_interval_us;	/* rcv interval for delivered packets */
-	long rtt_us;		/* RTT of last (S)ACKed packet (or -1) */
-	int  losses;		/* number of packets marked lost upon ACK */
-	__u32  acked_sacked;	/* number of packets newly (S)ACKed upon ACK */
-	__u32  prior_in_flight;	/* in flight before this ACK */
-	bool is_app_limited;	/* is sample from packet with bubble in pipe? */
-	bool is_retrans;	/* is sample from retransmission? */
-	bool is_ack_delayed;	/* is this (likely) a delayed ACK? */
-} __attribute__((preserve_access_index));
-
-#define TCP_CA_NAME_MAX		16
-#define TCP_CONG_NEEDS_ECN	0x2
-
-struct tcp_congestion_ops {
-	char name[TCP_CA_NAME_MAX];
-	__u32 flags;
-
-	/* initialize private data (optional) */
-	void (*init)(struct sock *sk);
-	/* cleanup private data  (optional) */
-	void (*release)(struct sock *sk);
-
-	/* return slow start threshold (required) */
-	__u32 (*ssthresh)(struct sock *sk);
-	/* do new cwnd calculation (required) */
-	void (*cong_avoid)(struct sock *sk, __u32 ack, __u32 acked);
-	/* call before changing ca_state (optional) */
-	void (*set_state)(struct sock *sk, __u8 new_state);
-	/* call when cwnd event occurs (optional) */
-	void (*cwnd_event)(struct sock *sk, enum tcp_ca_event ev);
-	/* call when ack arrives (optional) */
-	void (*in_ack_event)(struct sock *sk, __u32 flags);
-	/* new value of cwnd after loss (required) */
-	__u32  (*undo_cwnd)(struct sock *sk);
-	/* hook for packet ack accounting (optional) */
-	void (*pkts_acked)(struct sock *sk, const struct ack_sample *sample);
-	/* override sysctl_tcp_min_tso_segs */
-	__u32 (*min_tso_segs)(struct sock *sk);
-	/* returns the multiplier used in tcp_sndbuf_expand (optional) */
-	__u32 (*sndbuf_expand)(struct sock *sk);
-	/* call when packets are delivered to update cwnd and pacing rate,
-	 * after all the ca_state processing. (optional)
-	 */
-	void (*cong_control)(struct sock *sk, const struct rate_sample *rs);
-	void *owner;
-};
-
-#define min(a, b) ((a) < (b) ? (a) : (b))
-#define max(a, b) ((a) > (b) ? (a) : (b))
-#define min_not_zero(x, y) ({			\
-	typeof(x) __x = (x);			\
-	typeof(y) __y = (y);			\
-	__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
-
-static __always_inline bool tcp_in_slow_start(const struct tcp_sock *tp)
-{
-	return tp->snd_cwnd < tp->snd_ssthresh;
-}
-
-static __always_inline bool tcp_is_cwnd_limited(const struct sock *sk)
-{
-	const struct tcp_sock *tp = tcp_sk(sk);
-
-	/* If in slow start, ensure cwnd grows to twice what was ACKed. */
-	if (tcp_in_slow_start(tp))
-		return tp->snd_cwnd < 2 * tp->max_packets_out;
-
-	return !!BPF_CORE_READ_BITFIELD(tp, is_cwnd_limited);
-}
-
-static __always_inline bool tcp_cc_eq(const char *a, const char *b)
-{
-	int i;
-
-	for (i = 0; i < TCP_CA_NAME_MAX; i++) {
-		if (a[i] != b[i])
-			return false;
-		if (!a[i])
-			break;
-	}
-
-	return true;
-}
-
-extern __u32 tcp_slow_start(struct tcp_sock *tp, __u32 acked) __ksym;
-extern void tcp_cong_avoid_ai(struct tcp_sock *tp, __u32 w, __u32 acked) __ksym;
-
-struct mptcp_sock {
-	struct inet_connection_sock	sk;
-
-	__u32		token;
-	struct sock	*first;
-	char		ca_name[TCP_CA_NAME_MAX];
-} __attribute__((preserve_access_index));
-
-#endif
diff --git a/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c b/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c
index edcd26106557..2a18bd320e92 100644
--- a/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c
+++ b/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c
@@ -10,18 +10,30 @@
 #include <linux/percpu-defs.h>
 #include <linux/sysfs.h>
 #include <linux/tracepoint.h>
+#include <linux/net.h>
+#include <linux/socket.h>
+#include <linux/nsproxy.h>
+#include <linux/inet.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/un.h>
+#include <net/sock.h>
 #include "bpf_testmod.h"
 #include "bpf_testmod_kfunc.h"
 
 #define CREATE_TRACE_POINTS
 #include "bpf_testmod-events.h"
 
+#define CONNECT_TIMEOUT_SEC 1
+
 typedef int (*func_proto_typedef)(long);
 typedef int (*func_proto_typedef_nested1)(func_proto_typedef);
 typedef int (*func_proto_typedef_nested2)(func_proto_typedef_nested1);
 
 DEFINE_PER_CPU(int, bpf_testmod_ksym_percpu) = 123;
 long bpf_testmod_test_struct_arg_result;
+static DEFINE_MUTEX(sock_lock);
+static struct socket *sock;
 
 struct bpf_testmod_struct_arg_1 {
 	int a;
@@ -497,6 +509,241 @@ __bpf_kfunc static u32 bpf_kfunc_call_test_static_unused_arg(u32 arg, u32 unused
 	return arg;
 }
 
+__bpf_kfunc void bpf_kfunc_call_test_sleepable(void)
+{
+}
+
+__bpf_kfunc int bpf_kfunc_init_sock(struct init_sock_args *args)
+{
+	int proto;
+	int err;
+
+	mutex_lock(&sock_lock);
+
+	if (sock) {
+		pr_err("%s called without releasing old sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	switch (args->af) {
+	case AF_INET:
+	case AF_INET6:
+		proto = args->type == SOCK_STREAM ? IPPROTO_TCP : IPPROTO_UDP;
+		break;
+	case AF_UNIX:
+		proto = PF_UNIX;
+		break;
+	default:
+		pr_err("invalid address family %d\n", args->af);
+		err = -EINVAL;
+		goto out;
+	}
+
+	err = sock_create_kern(current->nsproxy->net_ns, args->af, args->type,
+			       proto, &sock);
+
+	if (!err)
+		/* Set timeout for call to kernel_connect() to prevent it from hanging,
+		 * and consider the connection attempt failed if it returns
+		 * -EINPROGRESS.
+		 */
+		sock->sk->sk_sndtimeo = CONNECT_TIMEOUT_SEC * HZ;
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc void bpf_kfunc_close_sock(void)
+{
+	mutex_lock(&sock_lock);
+
+	if (sock) {
+		sock_release(sock);
+		sock = NULL;
+	}
+
+	mutex_unlock(&sock_lock);
+}
+
+__bpf_kfunc int bpf_kfunc_call_kernel_connect(struct addr_args *args)
+{
+	int err;
+
+	if (args->addrlen > sizeof(args->addr))
+		return -EINVAL;
+
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = kernel_connect(sock, (struct sockaddr *)&args->addr,
+			     args->addrlen, 0);
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc int bpf_kfunc_call_kernel_bind(struct addr_args *args)
+{
+	int err;
+
+	if (args->addrlen > sizeof(args->addr))
+		return -EINVAL;
+
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = kernel_bind(sock, (struct sockaddr *)&args->addr, args->addrlen);
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc int bpf_kfunc_call_kernel_listen(void)
+{
+	int err;
+
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = kernel_listen(sock, 128);
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc int bpf_kfunc_call_kernel_sendmsg(struct sendmsg_args *args)
+{
+	struct msghdr msg = {
+		.msg_name	= &args->addr.addr,
+		.msg_namelen	= args->addr.addrlen,
+	};
+	struct kvec iov;
+	int err;
+
+	if (args->addr.addrlen > sizeof(args->addr.addr) ||
+	    args->msglen > sizeof(args->msg))
+		return -EINVAL;
+
+	iov.iov_base = args->msg;
+	iov.iov_len  = args->msglen;
+
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = kernel_sendmsg(sock, &msg, &iov, 1, args->msglen);
+	args->addr.addrlen = msg.msg_namelen;
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc int bpf_kfunc_call_sock_sendmsg(struct sendmsg_args *args)
+{
+	struct msghdr msg = {
+		.msg_name	= &args->addr.addr,
+		.msg_namelen	= args->addr.addrlen,
+	};
+	struct kvec iov;
+	int err;
+
+	if (args->addr.addrlen > sizeof(args->addr.addr) ||
+	    args->msglen > sizeof(args->msg))
+		return -EINVAL;
+
+	iov.iov_base = args->msg;
+	iov.iov_len  = args->msglen;
+
+	iov_iter_kvec(&msg.msg_iter, ITER_SOURCE, &iov, 1, args->msglen);
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = sock_sendmsg(sock, &msg);
+	args->addr.addrlen = msg.msg_namelen;
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc int bpf_kfunc_call_kernel_getsockname(struct addr_args *args)
+{
+	int err;
+
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = kernel_getsockname(sock, (struct sockaddr *)&args->addr);
+	if (err < 0)
+		goto out;
+
+	args->addrlen = err;
+	err = 0;
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
+__bpf_kfunc int bpf_kfunc_call_kernel_getpeername(struct addr_args *args)
+{
+	int err;
+
+	mutex_lock(&sock_lock);
+
+	if (!sock) {
+		pr_err("%s called without initializing sock", __func__);
+		err = -EPERM;
+		goto out;
+	}
+
+	err = kernel_getpeername(sock, (struct sockaddr *)&args->addr);
+	if (err < 0)
+		goto out;
+
+	args->addrlen = err;
+	err = 0;
+out:
+	mutex_unlock(&sock_lock);
+
+	return err;
+}
+
 BTF_KFUNCS_START(bpf_testmod_check_kfunc_ids)
 BTF_ID_FLAGS(func, bpf_testmod_test_mod_kfunc)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test1)
@@ -523,6 +770,16 @@ BTF_ID_FLAGS(func, bpf_kfunc_call_test_ref, KF_TRUSTED_ARGS | KF_RCU)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_destructive, KF_DESTRUCTIVE)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_static_unused_arg)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_offset)
+BTF_ID_FLAGS(func, bpf_kfunc_call_test_sleepable, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_init_sock, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_close_sock, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_kernel_connect, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_kernel_bind, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_kernel_listen, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_kernel_sendmsg, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_sock_sendmsg, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_kernel_getsockname, KF_SLEEPABLE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_kernel_getpeername, KF_SLEEPABLE)
 BTF_KFUNCS_END(bpf_testmod_check_kfunc_ids)
 
 static int bpf_testmod_ops_init(struct btf *btf)
@@ -653,6 +910,8 @@ static int bpf_testmod_init(void)
 		return ret;
 	if (bpf_fentry_test1(0) < 0)
 		return -EINVAL;
+	sock = NULL;
+	mutex_init(&sock_lock);
 	return sysfs_create_bin_file(kernel_kobj, &bin_attr_bpf_testmod_file);
 }
 
@@ -666,6 +925,7 @@ static void bpf_testmod_exit(void)
 	while (refcount_read(&prog_test_struct.cnt) > 1)
 		msleep(20);
 
+	bpf_kfunc_close_sock();
 	sysfs_remove_bin_file(kernel_kobj, &bin_attr_bpf_testmod_file);
 }
 
diff --git a/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod_kfunc.h b/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod_kfunc.h
index 7c664dd61059..b0d586a6751f 100644
--- a/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod_kfunc.h
+++ b/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod_kfunc.h
@@ -64,6 +64,22 @@ struct prog_test_fail3 {
 	char arr2[];
 };
 
+struct init_sock_args {
+	int af;
+	int type;
+};
+
+struct addr_args {
+	char addr[sizeof(struct __kernel_sockaddr_storage)];
+	int addrlen;
+};
+
+struct sendmsg_args {
+	struct addr_args addr;
+	char msg[10];
+	int msglen;
+};
+
 struct prog_test_ref_kfunc *
 bpf_kfunc_call_test_acquire(unsigned long *scalar_ptr) __ksym;
 void bpf_kfunc_call_test_release(struct prog_test_ref_kfunc *p) __ksym;
@@ -96,6 +112,7 @@ void bpf_kfunc_call_test_pass2(struct prog_test_pass2 *p) __ksym;
 void bpf_kfunc_call_test_mem_len_fail2(__u64 *mem, int len) __ksym;
 
 void bpf_kfunc_call_test_destructive(void) __ksym;
+void bpf_kfunc_call_test_sleepable(void) __ksym;
 
 void bpf_kfunc_call_test_offset(struct prog_test_ref_kfunc *p);
 struct prog_test_member *bpf_kfunc_call_memb_acquire(void);
@@ -106,4 +123,15 @@ void bpf_kfunc_call_test_fail3(struct prog_test_fail3 *p);
 void bpf_kfunc_call_test_mem_len_fail1(void *mem, int len);
 
 void bpf_kfunc_common_test(void) __ksym;
+
+int bpf_kfunc_init_sock(struct init_sock_args *args) __ksym;
+void bpf_kfunc_close_sock(void) __ksym;
+int bpf_kfunc_call_kernel_connect(struct addr_args *args) __ksym;
+int bpf_kfunc_call_kernel_bind(struct addr_args *args) __ksym;
+int bpf_kfunc_call_kernel_listen(void) __ksym;
+int bpf_kfunc_call_kernel_sendmsg(struct sendmsg_args *args) __ksym;
+int bpf_kfunc_call_sock_sendmsg(struct sendmsg_args *args) __ksym;
+int bpf_kfunc_call_kernel_getsockname(struct addr_args *args) __ksym;
+int bpf_kfunc_call_kernel_getpeername(struct addr_args *args) __ksym;
+
 #endif /* _BPF_TESTMOD_KFUNC_H */
diff --git a/tools/testing/selftests/bpf/cgroup_helpers.c b/tools/testing/selftests/bpf/cgroup_helpers.c
index 19be9c63d5e8..23bb9a9e6a7d 100644
--- a/tools/testing/selftests/bpf/cgroup_helpers.c
+++ b/tools/testing/selftests/bpf/cgroup_helpers.c
@@ -429,7 +429,7 @@ int create_and_get_cgroup(const char *relative_path)
  * which is an invalid cgroup id.
  * If there is a failure, it prints the error to stderr.
  */
-unsigned long long get_cgroup_id_from_path(const char *cgroup_workdir)
+static unsigned long long get_cgroup_id_from_path(const char *cgroup_workdir)
 {
 	int dirfd, err, flags, mount_id, fhsize;
 	union {
@@ -508,6 +508,9 @@ int cgroup_setup_and_join(const char *path) {
 /**
  * setup_classid_environment() - Setup the cgroupv1 net_cls environment
  *
+ * This function should only be called in a custom mount namespace, e.g.
+ * created by running setup_cgroup_environment.
+ *
  * After calling this function, cleanup_classid_environment should be called
  * once testing is complete.
  *
diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config
index 01f241ea2c67..eeabd798bc3a 100644
--- a/tools/testing/selftests/bpf/config
+++ b/tools/testing/selftests/bpf/config
@@ -13,7 +13,12 @@ CONFIG_BPF_SYSCALL=y
 CONFIG_CGROUP_BPF=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_USER_API=y
 CONFIG_CRYPTO_USER_API_HASH=y
+CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_CRYPTO_SKCIPHER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_BTF=y
 CONFIG_DEBUG_INFO_DWARF4=y
@@ -88,3 +93,5 @@ CONFIG_VSOCKETS=y
 CONFIG_VXLAN=y
 CONFIG_XDP_SOCKETS=y
 CONFIG_XFRM_INTERFACE=y
+CONFIG_TCP_CONG_DCTCP=y
+CONFIG_TCP_CONG_BBR=y
diff --git a/tools/testing/selftests/bpf/network_helpers.c b/tools/testing/selftests/bpf/network_helpers.c
index 6db27a9088e9..35250e6cde7f 100644
--- a/tools/testing/selftests/bpf/network_helpers.c
+++ b/tools/testing/selftests/bpf/network_helpers.c
@@ -52,6 +52,8 @@ struct ipv6_packet pkt_v6 = {
 	.tcp.doff = 5,
 };
 
+static const struct network_helper_opts default_opts;
+
 int settimeo(int fd, int timeout_ms)
 {
 	struct timeval timeout = { .tv_sec = 3 };
@@ -78,24 +80,22 @@ int settimeo(int fd, int timeout_ms)
 
 #define save_errno_close(fd) ({ int __save = errno; close(fd); errno = __save; })
 
-static int __start_server(int type, int protocol, const struct sockaddr *addr,
-			  socklen_t addrlen, int timeout_ms, bool reuseport)
+static int __start_server(int type, const struct sockaddr *addr, socklen_t addrlen,
+			  const struct network_helper_opts *opts)
 {
-	int on = 1;
 	int fd;
 
-	fd = socket(addr->sa_family, type, protocol);
+	fd = socket(addr->sa_family, type, opts->proto);
 	if (fd < 0) {
 		log_err("Failed to create server socket");
 		return -1;
 	}
 
-	if (settimeo(fd, timeout_ms))
+	if (settimeo(fd, opts->timeout_ms))
 		goto error_close;
 
-	if (reuseport &&
-	    setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &on, sizeof(on))) {
-		log_err("Failed to set SO_REUSEPORT");
+	if (opts->post_socket_cb && opts->post_socket_cb(fd, NULL)) {
+		log_err("Failed to call post_socket_cb");
 		goto error_close;
 	}
 
@@ -118,35 +118,35 @@ error_close:
 	return -1;
 }
 
-static int start_server_proto(int family, int type, int protocol,
-			      const char *addr_str, __u16 port, int timeout_ms)
+int start_server(int family, int type, const char *addr_str, __u16 port,
+		 int timeout_ms)
 {
+	struct network_helper_opts opts = {
+		.timeout_ms	= timeout_ms,
+	};
 	struct sockaddr_storage addr;
 	socklen_t addrlen;
 
 	if (make_sockaddr(family, addr_str, port, &addr, &addrlen))
 		return -1;
 
-	return __start_server(type, protocol, (struct sockaddr *)&addr,
-			      addrlen, timeout_ms, false);
+	return __start_server(type, (struct sockaddr *)&addr, addrlen, &opts);
 }
 
-int start_server(int family, int type, const char *addr_str, __u16 port,
-		 int timeout_ms)
+static int reuseport_cb(int fd, const struct post_socket_opts *opts)
 {
-	return start_server_proto(family, type, 0, addr_str, port, timeout_ms);
-}
+	int on = 1;
 
-int start_mptcp_server(int family, const char *addr_str, __u16 port,
-		       int timeout_ms)
-{
-	return start_server_proto(family, SOCK_STREAM, IPPROTO_MPTCP, addr_str,
-				  port, timeout_ms);
+	return setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &on, sizeof(on));
 }
 
 int *start_reuseport_server(int family, int type, const char *addr_str,
 			    __u16 port, int timeout_ms, unsigned int nr_listens)
 {
+	struct network_helper_opts opts = {
+		.timeout_ms = timeout_ms,
+		.post_socket_cb = reuseport_cb,
+	};
 	struct sockaddr_storage addr;
 	unsigned int nr_fds = 0;
 	socklen_t addrlen;
@@ -162,8 +162,7 @@ int *start_reuseport_server(int family, int type, const char *addr_str,
 	if (!fds)
 		return NULL;
 
-	fds[0] = __start_server(type, 0, (struct sockaddr *)&addr, addrlen,
-				timeout_ms, true);
+	fds[0] = __start_server(type, (struct sockaddr *)&addr, addrlen, &opts);
 	if (fds[0] == -1)
 		goto close_fds;
 	nr_fds = 1;
@@ -172,8 +171,7 @@ int *start_reuseport_server(int family, int type, const char *addr_str,
 		goto close_fds;
 
 	for (; nr_fds < nr_listens; nr_fds++) {
-		fds[nr_fds] = __start_server(type, 0, (struct sockaddr *)&addr,
-					     addrlen, timeout_ms, true);
+		fds[nr_fds] = __start_server(type, (struct sockaddr *)&addr, addrlen, &opts);
 		if (fds[nr_fds] == -1)
 			goto close_fds;
 	}
@@ -185,6 +183,15 @@ close_fds:
 	return NULL;
 }
 
+int start_server_addr(int type, const struct sockaddr_storage *addr, socklen_t len,
+		      const struct network_helper_opts *opts)
+{
+	if (!opts)
+		opts = &default_opts;
+
+	return __start_server(type, (struct sockaddr *)addr, len, opts);
+}
+
 void free_fds(int *fds, unsigned int nr_close_fds)
 {
 	if (fds) {
@@ -258,17 +265,24 @@ static int connect_fd_to_addr(int fd,
 	return 0;
 }
 
-int connect_to_addr(const struct sockaddr_storage *addr, socklen_t addrlen, int type)
+int connect_to_addr(int type, const struct sockaddr_storage *addr, socklen_t addrlen,
+		    const struct network_helper_opts *opts)
 {
 	int fd;
 
-	fd = socket(addr->ss_family, type, 0);
+	if (!opts)
+		opts = &default_opts;
+
+	fd = socket(addr->ss_family, type, opts->proto);
 	if (fd < 0) {
 		log_err("Failed to create client socket");
 		return -1;
 	}
 
-	if (connect_fd_to_addr(fd, addr, addrlen, false))
+	if (settimeo(fd, opts->timeout_ms))
+		goto error_close;
+
+	if (connect_fd_to_addr(fd, addr, addrlen, opts->must_fail))
 		goto error_close;
 
 	return fd;
@@ -278,8 +292,6 @@ error_close:
 	return -1;
 }
 
-static const struct network_helper_opts default_opts;
-
 int connect_to_fd_opts(int server_fd, const struct network_helper_opts *opts)
 {
 	struct sockaddr_storage addr;
@@ -442,25 +454,35 @@ struct nstoken *open_netns(const char *name)
 	struct nstoken *token;
 
 	token = calloc(1, sizeof(struct nstoken));
-	if (!ASSERT_OK_PTR(token, "malloc token"))
+	if (!token) {
+		log_err("Failed to malloc token");
 		return NULL;
+	}
 
 	token->orig_netns_fd = open("/proc/self/ns/net", O_RDONLY);
-	if (!ASSERT_GE(token->orig_netns_fd, 0, "open /proc/self/ns/net"))
+	if (token->orig_netns_fd == -1) {
+		log_err("Failed to open(/proc/self/ns/net)");
 		goto fail;
+	}
 
 	snprintf(nspath, sizeof(nspath), "%s/%s", "/var/run/netns", name);
 	nsfd = open(nspath, O_RDONLY | O_CLOEXEC);
-	if (!ASSERT_GE(nsfd, 0, "open netns fd"))
+	if (nsfd == -1) {
+		log_err("Failed to open(%s)", nspath);
 		goto fail;
+	}
 
 	err = setns(nsfd, CLONE_NEWNET);
 	close(nsfd);
-	if (!ASSERT_OK(err, "setns"))
+	if (err) {
+		log_err("Failed to setns(nsfd)");
 		goto fail;
+	}
 
 	return token;
 fail:
+	if (token->orig_netns_fd != -1)
+		close(token->orig_netns_fd);
 	free(token);
 	return NULL;
 }
@@ -470,7 +492,8 @@ void close_netns(struct nstoken *token)
 	if (!token)
 		return;
 
-	ASSERT_OK(setns(token->orig_netns_fd, CLONE_NEWNET), "setns");
+	if (setns(token->orig_netns_fd, CLONE_NEWNET))
+		log_err("Failed to setns(orig_netns_fd)");
 	close(token->orig_netns_fd);
 	free(token);
 }
@@ -497,3 +520,153 @@ int get_socket_local_port(int sock_fd)
 
 	return -1;
 }
+
+int get_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param)
+{
+	struct ifreq ifr = {0};
+	int sockfd, err;
+
+	sockfd = socket(AF_INET, SOCK_DGRAM, 0);
+	if (sockfd < 0)
+		return -errno;
+
+	memcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+
+	ring_param->cmd = ETHTOOL_GRINGPARAM;
+	ifr.ifr_data = (char *)ring_param;
+
+	if (ioctl(sockfd, SIOCETHTOOL, &ifr) < 0) {
+		err = errno;
+		close(sockfd);
+		return -err;
+	}
+
+	close(sockfd);
+	return 0;
+}
+
+int set_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param)
+{
+	struct ifreq ifr = {0};
+	int sockfd, err;
+
+	sockfd = socket(AF_INET, SOCK_DGRAM, 0);
+	if (sockfd < 0)
+		return -errno;
+
+	memcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+
+	ring_param->cmd = ETHTOOL_SRINGPARAM;
+	ifr.ifr_data = (char *)ring_param;
+
+	if (ioctl(sockfd, SIOCETHTOOL, &ifr) < 0) {
+		err = errno;
+		close(sockfd);
+		return -err;
+	}
+
+	close(sockfd);
+	return 0;
+}
+
+struct send_recv_arg {
+	int		fd;
+	uint32_t	bytes;
+	int		stop;
+};
+
+static void *send_recv_server(void *arg)
+{
+	struct send_recv_arg *a = (struct send_recv_arg *)arg;
+	ssize_t nr_sent = 0, bytes = 0;
+	char batch[1500];
+	int err = 0, fd;
+
+	fd = accept(a->fd, NULL, NULL);
+	while (fd == -1) {
+		if (errno == EINTR)
+			continue;
+		err = -errno;
+		goto done;
+	}
+
+	if (settimeo(fd, 0)) {
+		err = -errno;
+		goto done;
+	}
+
+	while (bytes < a->bytes && !READ_ONCE(a->stop)) {
+		nr_sent = send(fd, &batch,
+			       MIN(a->bytes - bytes, sizeof(batch)), 0);
+		if (nr_sent == -1 && errno == EINTR)
+			continue;
+		if (nr_sent == -1) {
+			err = -errno;
+			break;
+		}
+		bytes += nr_sent;
+	}
+
+	if (bytes != a->bytes) {
+		log_err("send %zd expected %u", bytes, a->bytes);
+		if (!err)
+			err = bytes > a->bytes ? -E2BIG : -EINTR;
+	}
+
+done:
+	if (fd >= 0)
+		close(fd);
+	if (err) {
+		WRITE_ONCE(a->stop, 1);
+		return ERR_PTR(err);
+	}
+	return NULL;
+}
+
+int send_recv_data(int lfd, int fd, uint32_t total_bytes)
+{
+	ssize_t nr_recv = 0, bytes = 0;
+	struct send_recv_arg arg = {
+		.fd	= lfd,
+		.bytes	= total_bytes,
+		.stop	= 0,
+	};
+	pthread_t srv_thread;
+	void *thread_ret;
+	char batch[1500];
+	int err = 0;
+
+	err = pthread_create(&srv_thread, NULL, send_recv_server, (void *)&arg);
+	if (err) {
+		log_err("Failed to pthread_create");
+		return err;
+	}
+
+	/* recv total_bytes */
+	while (bytes < total_bytes && !READ_ONCE(arg.stop)) {
+		nr_recv = recv(fd, &batch,
+			       MIN(total_bytes - bytes, sizeof(batch)), 0);
+		if (nr_recv == -1 && errno == EINTR)
+			continue;
+		if (nr_recv == -1) {
+			err = -errno;
+			break;
+		}
+		bytes += nr_recv;
+	}
+
+	if (bytes != total_bytes) {
+		log_err("recv %zd expected %u", bytes, total_bytes);
+		if (!err)
+			err = bytes > total_bytes ? -E2BIG : -EINTR;
+	}
+
+	WRITE_ONCE(arg.stop, 1);
+	pthread_join(srv_thread, &thread_ret);
+	if (IS_ERR(thread_ret)) {
+		log_err("Failed in thread_ret %ld", PTR_ERR(thread_ret));
+		err = err ? : PTR_ERR(thread_ret);
+	}
+
+	return err;
+}
diff --git a/tools/testing/selftests/bpf/network_helpers.h b/tools/testing/selftests/bpf/network_helpers.h
index 94b9be24e39b..883c7ea9d8d5 100644
--- a/tools/testing/selftests/bpf/network_helpers.h
+++ b/tools/testing/selftests/bpf/network_helpers.h
@@ -9,14 +9,20 @@ typedef __u16 __sum16;
 #include <linux/if_packet.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+#include <linux/err.h>
 #include <netinet/tcp.h>
 #include <bpf/bpf_endian.h>
+#include <net/if.h>
 
 #define MAGIC_VAL 0x1234
 #define NUM_ITER 100000
 #define VIP_NUM 5
 #define MAGIC_BYTES 123
 
+struct post_socket_opts {};
+
 struct network_helper_opts {
 	const char *cc;
 	int timeout_ms;
@@ -24,6 +30,7 @@ struct network_helper_opts {
 	bool noconnect;
 	int type;
 	int proto;
+	int (*post_socket_cb)(int fd, const struct post_socket_opts *opts);
 };
 
 /* ipv4 test vector */
@@ -45,13 +52,14 @@ extern struct ipv6_packet pkt_v6;
 int settimeo(int fd, int timeout_ms);
 int start_server(int family, int type, const char *addr, __u16 port,
 		 int timeout_ms);
-int start_mptcp_server(int family, const char *addr, __u16 port,
-		       int timeout_ms);
 int *start_reuseport_server(int family, int type, const char *addr_str,
 			    __u16 port, int timeout_ms,
 			    unsigned int nr_listens);
+int start_server_addr(int type, const struct sockaddr_storage *addr, socklen_t len,
+		      const struct network_helper_opts *opts);
 void free_fds(int *fds, unsigned int nr_close_fds);
-int connect_to_addr(const struct sockaddr_storage *addr, socklen_t len, int type);
+int connect_to_addr(int type, const struct sockaddr_storage *addr, socklen_t len,
+		    const struct network_helper_opts *opts);
 int connect_to_fd(int server_fd, int timeout_ms);
 int connect_to_fd_opts(int server_fd, const struct network_helper_opts *opts);
 int connect_fd_to_fd(int client_fd, int server_fd, int timeout_ms);
@@ -61,6 +69,8 @@ int make_sockaddr(int family, const char *addr_str, __u16 port,
 		  struct sockaddr_storage *addr, socklen_t *len);
 char *ping_command(int family);
 int get_socket_local_port(int sock_fd);
+int get_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param);
+int set_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param);
 
 struct nstoken;
 /**
@@ -71,6 +81,7 @@ struct nstoken;
  */
 struct nstoken *open_netns(const char *name);
 void close_netns(struct nstoken *token);
+int send_recv_data(int lfd, int fd, uint32_t total_bytes);
 
 static __u16 csum_fold(__u32 csum)
 {
diff --git a/tools/testing/selftests/bpf/prog_tests/arena_atomics.c b/tools/testing/selftests/bpf/prog_tests/arena_atomics.c
new file mode 100644
index 000000000000..0807a48a58ee
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/arena_atomics.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+#include <test_progs.h>
+#include "arena_atomics.skel.h"
+
+static void test_add(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.add);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->add64_value, 3, "add64_value");
+	ASSERT_EQ(skel->arena->add64_result, 1, "add64_result");
+
+	ASSERT_EQ(skel->arena->add32_value, 3, "add32_value");
+	ASSERT_EQ(skel->arena->add32_result, 1, "add32_result");
+
+	ASSERT_EQ(skel->arena->add_stack_value_copy, 3, "add_stack_value");
+	ASSERT_EQ(skel->arena->add_stack_result, 1, "add_stack_result");
+
+	ASSERT_EQ(skel->arena->add_noreturn_value, 3, "add_noreturn_value");
+}
+
+static void test_sub(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.sub);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->sub64_value, -1, "sub64_value");
+	ASSERT_EQ(skel->arena->sub64_result, 1, "sub64_result");
+
+	ASSERT_EQ(skel->arena->sub32_value, -1, "sub32_value");
+	ASSERT_EQ(skel->arena->sub32_result, 1, "sub32_result");
+
+	ASSERT_EQ(skel->arena->sub_stack_value_copy, -1, "sub_stack_value");
+	ASSERT_EQ(skel->arena->sub_stack_result, 1, "sub_stack_result");
+
+	ASSERT_EQ(skel->arena->sub_noreturn_value, -1, "sub_noreturn_value");
+}
+
+static void test_and(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.and);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->and64_value, 0x010ull << 32, "and64_value");
+	ASSERT_EQ(skel->arena->and32_value, 0x010, "and32_value");
+}
+
+static void test_or(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.or);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->or64_value, 0x111ull << 32, "or64_value");
+	ASSERT_EQ(skel->arena->or32_value, 0x111, "or32_value");
+}
+
+static void test_xor(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.xor);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->xor64_value, 0x101ull << 32, "xor64_value");
+	ASSERT_EQ(skel->arena->xor32_value, 0x101, "xor32_value");
+}
+
+static void test_cmpxchg(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.cmpxchg);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->cmpxchg64_value, 2, "cmpxchg64_value");
+	ASSERT_EQ(skel->arena->cmpxchg64_result_fail, 1, "cmpxchg_result_fail");
+	ASSERT_EQ(skel->arena->cmpxchg64_result_succeed, 1, "cmpxchg_result_succeed");
+
+	ASSERT_EQ(skel->arena->cmpxchg32_value, 2, "lcmpxchg32_value");
+	ASSERT_EQ(skel->arena->cmpxchg32_result_fail, 1, "cmpxchg_result_fail");
+	ASSERT_EQ(skel->arena->cmpxchg32_result_succeed, 1, "cmpxchg_result_succeed");
+}
+
+static void test_xchg(struct arena_atomics *skel)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	int err, prog_fd;
+
+	/* No need to attach it, just run it directly */
+	prog_fd = bpf_program__fd(skel->progs.xchg);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, "test_run_opts err"))
+		return;
+	if (!ASSERT_OK(topts.retval, "test_run_opts retval"))
+		return;
+
+	ASSERT_EQ(skel->arena->xchg64_value, 2, "xchg64_value");
+	ASSERT_EQ(skel->arena->xchg64_result, 1, "xchg64_result");
+
+	ASSERT_EQ(skel->arena->xchg32_value, 2, "xchg32_value");
+	ASSERT_EQ(skel->arena->xchg32_result, 1, "xchg32_result");
+}
+
+void test_arena_atomics(void)
+{
+	struct arena_atomics *skel;
+	int err;
+
+	skel = arena_atomics__open();
+	if (!ASSERT_OK_PTR(skel, "arena atomics skeleton open"))
+		return;
+
+	if (skel->data->skip_tests) {
+		printf("%s:SKIP:no ENABLE_ATOMICS_TESTS or no addr_space_cast support in clang",
+		       __func__);
+		test__skip();
+		goto cleanup;
+	}
+	err = arena_atomics__load(skel);
+	if (!ASSERT_OK(err, "arena atomics skeleton load"))
+		return;
+	skel->bss->pid = getpid();
+
+	if (test__start_subtest("add"))
+		test_add(skel);
+	if (test__start_subtest("sub"))
+		test_sub(skel);
+	if (test__start_subtest("and"))
+		test_and(skel);
+	if (test__start_subtest("or"))
+		test_or(skel);
+	if (test__start_subtest("xor"))
+		test_xor(skel);
+	if (test__start_subtest("cmpxchg"))
+		test_cmpxchg(skel);
+	if (test__start_subtest("xchg"))
+		test_xchg(skel);
+
+cleanup:
+	arena_atomics__destroy(skel);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c
index 1454cebc262b..4407ea428e77 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c
@@ -573,6 +573,115 @@ cleanup:
 		close(lsm_fd);
 }
 
+static void tp_btf_subtest(struct test_bpf_cookie *skel)
+{
+	__u64 cookie;
+	int prog_fd, link_fd = -1;
+	struct bpf_link *link = NULL;
+	LIBBPF_OPTS(bpf_link_create_opts, link_opts);
+	LIBBPF_OPTS(bpf_raw_tp_opts, raw_tp_opts);
+	LIBBPF_OPTS(bpf_trace_opts, trace_opts);
+
+	/* There are three different ways to attach tp_btf (BTF-aware raw
+	 * tracepoint) programs. Let's test all of them.
+	 */
+	prog_fd = bpf_program__fd(skel->progs.handle_tp_btf);
+
+	/* low-level BPF_RAW_TRACEPOINT_OPEN command wrapper */
+	skel->bss->tp_btf_res = 0;
+
+	raw_tp_opts.cookie = cookie = 0x11000000000000L;
+	link_fd = bpf_raw_tracepoint_open_opts(prog_fd, &raw_tp_opts);
+	if (!ASSERT_GE(link_fd, 0, "bpf_raw_tracepoint_open_opts"))
+		goto cleanup;
+
+	usleep(1); /* trigger */
+	close(link_fd); /* detach */
+	link_fd = -1;
+
+	ASSERT_EQ(skel->bss->tp_btf_res, cookie, "raw_tp_open_res");
+
+	/* low-level generic bpf_link_create() API */
+	skel->bss->tp_btf_res = 0;
+
+	link_opts.tracing.cookie = cookie = 0x22000000000000L;
+	link_fd = bpf_link_create(prog_fd, 0, BPF_TRACE_RAW_TP, &link_opts);
+	if (!ASSERT_GE(link_fd, 0, "bpf_link_create"))
+		goto cleanup;
+
+	usleep(1); /* trigger */
+	close(link_fd); /* detach */
+	link_fd = -1;
+
+	ASSERT_EQ(skel->bss->tp_btf_res, cookie, "link_create_res");
+
+	/* high-level bpf_link-based bpf_program__attach_trace_opts() API */
+	skel->bss->tp_btf_res = 0;
+
+	trace_opts.cookie = cookie = 0x33000000000000L;
+	link = bpf_program__attach_trace_opts(skel->progs.handle_tp_btf, &trace_opts);
+	if (!ASSERT_OK_PTR(link, "attach_trace_opts"))
+		goto cleanup;
+
+	usleep(1); /* trigger */
+	bpf_link__destroy(link); /* detach */
+	link = NULL;
+
+	ASSERT_EQ(skel->bss->tp_btf_res, cookie, "attach_trace_opts_res");
+
+cleanup:
+	if (link_fd >= 0)
+		close(link_fd);
+	bpf_link__destroy(link);
+}
+
+static void raw_tp_subtest(struct test_bpf_cookie *skel)
+{
+	__u64 cookie;
+	int prog_fd, link_fd = -1;
+	struct bpf_link *link = NULL;
+	LIBBPF_OPTS(bpf_raw_tp_opts, raw_tp_opts);
+	LIBBPF_OPTS(bpf_raw_tracepoint_opts, opts);
+
+	/* There are two different ways to attach raw_tp programs */
+	prog_fd = bpf_program__fd(skel->progs.handle_raw_tp);
+
+	/* low-level BPF_RAW_TRACEPOINT_OPEN command wrapper */
+	skel->bss->raw_tp_res = 0;
+
+	raw_tp_opts.tp_name = "sys_enter";
+	raw_tp_opts.cookie = cookie = 0x55000000000000L;
+	link_fd = bpf_raw_tracepoint_open_opts(prog_fd, &raw_tp_opts);
+	if (!ASSERT_GE(link_fd, 0, "bpf_raw_tracepoint_open_opts"))
+		goto cleanup;
+
+	usleep(1); /* trigger */
+	close(link_fd); /* detach */
+	link_fd = -1;
+
+	ASSERT_EQ(skel->bss->raw_tp_res, cookie, "raw_tp_open_res");
+
+	/* high-level bpf_link-based bpf_program__attach_raw_tracepoint_opts() API */
+	skel->bss->raw_tp_res = 0;
+
+	opts.cookie = cookie = 0x66000000000000L;
+	link = bpf_program__attach_raw_tracepoint_opts(skel->progs.handle_raw_tp,
+						       "sys_enter", &opts);
+	if (!ASSERT_OK_PTR(link, "attach_raw_tp_opts"))
+		goto cleanup;
+
+	usleep(1); /* trigger */
+	bpf_link__destroy(link); /* detach */
+	link = NULL;
+
+	ASSERT_EQ(skel->bss->raw_tp_res, cookie, "attach_raw_tp_opts_res");
+
+cleanup:
+	if (link_fd >= 0)
+		close(link_fd);
+	bpf_link__destroy(link);
+}
+
 void test_bpf_cookie(void)
 {
 	struct test_bpf_cookie *skel;
@@ -601,6 +710,9 @@ void test_bpf_cookie(void)
 		tracing_subtest(skel);
 	if (test__start_subtest("lsm"))
 		lsm_subtest(skel);
-
+	if (test__start_subtest("tp_btf"))
+		tp_btf_subtest(skel);
+	if (test__start_subtest("raw_tp"))
+		raw_tp_subtest(skel);
 	test_bpf_cookie__destroy(skel);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c b/tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c
index a88e6e07e4f5..0aca02532794 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c
@@ -13,6 +13,8 @@
 #include "tcp_ca_write_sk_pacing.skel.h"
 #include "tcp_ca_incompl_cong_ops.skel.h"
 #include "tcp_ca_unsupp_cong_op.skel.h"
+#include "tcp_ca_kfunc.skel.h"
+#include "bpf_cc_cubic.skel.h"
 
 #ifndef ENOTSUPP
 #define ENOTSUPP 524
@@ -20,7 +22,6 @@
 
 static const unsigned int total_bytes = 10 * 1024 * 1024;
 static int expected_stg = 0xeB9F;
-static int stop;
 
 static int settcpca(int fd, const char *tcp_ca)
 {
@@ -33,63 +34,12 @@ static int settcpca(int fd, const char *tcp_ca)
 	return 0;
 }
 
-static void *server(void *arg)
-{
-	int lfd = (int)(long)arg, err = 0, fd;
-	ssize_t nr_sent = 0, bytes = 0;
-	char batch[1500];
-
-	fd = accept(lfd, NULL, NULL);
-	while (fd == -1) {
-		if (errno == EINTR)
-			continue;
-		err = -errno;
-		goto done;
-	}
-
-	if (settimeo(fd, 0)) {
-		err = -errno;
-		goto done;
-	}
-
-	while (bytes < total_bytes && !READ_ONCE(stop)) {
-		nr_sent = send(fd, &batch,
-			       MIN(total_bytes - bytes, sizeof(batch)), 0);
-		if (nr_sent == -1 && errno == EINTR)
-			continue;
-		if (nr_sent == -1) {
-			err = -errno;
-			break;
-		}
-		bytes += nr_sent;
-	}
-
-	ASSERT_EQ(bytes, total_bytes, "send");
-
-done:
-	if (fd >= 0)
-		close(fd);
-	if (err) {
-		WRITE_ONCE(stop, 1);
-		return ERR_PTR(err);
-	}
-	return NULL;
-}
-
 static void do_test(const char *tcp_ca, const struct bpf_map *sk_stg_map)
 {
-	struct sockaddr_in6 sa6 = {};
-	ssize_t nr_recv = 0, bytes = 0;
 	int lfd = -1, fd = -1;
-	pthread_t srv_thread;
-	socklen_t addrlen = sizeof(sa6);
-	void *thread_ret;
-	char batch[1500];
 	int err;
 
-	WRITE_ONCE(stop, 0);
-
-	lfd = socket(AF_INET6, SOCK_STREAM, 0);
+	lfd = start_server(AF_INET6, SOCK_STREAM, NULL, 0, 0);
 	if (!ASSERT_NEQ(lfd, -1, "socket"))
 		return;
 
@@ -99,23 +49,7 @@ static void do_test(const char *tcp_ca, const struct bpf_map *sk_stg_map)
 		return;
 	}
 
-	if (settcpca(lfd, tcp_ca) || settcpca(fd, tcp_ca) ||
-	    settimeo(lfd, 0) || settimeo(fd, 0))
-		goto done;
-
-	/* bind, listen and start server thread to accept */
-	sa6.sin6_family = AF_INET6;
-	sa6.sin6_addr = in6addr_loopback;
-	err = bind(lfd, (struct sockaddr *)&sa6, addrlen);
-	if (!ASSERT_NEQ(err, -1, "bind"))
-		goto done;
-
-	err = getsockname(lfd, (struct sockaddr *)&sa6, &addrlen);
-	if (!ASSERT_NEQ(err, -1, "getsockname"))
-		goto done;
-
-	err = listen(lfd, 1);
-	if (!ASSERT_NEQ(err, -1, "listen"))
+	if (settcpca(lfd, tcp_ca) || settcpca(fd, tcp_ca))
 		goto done;
 
 	if (sk_stg_map) {
@@ -126,7 +60,7 @@ static void do_test(const char *tcp_ca, const struct bpf_map *sk_stg_map)
 	}
 
 	/* connect to server */
-	err = connect(fd, (struct sockaddr *)&sa6, addrlen);
+	err = connect_fd_to_fd(fd, lfd, 0);
 	if (!ASSERT_NEQ(err, -1, "connect"))
 		goto done;
 
@@ -140,26 +74,7 @@ static void do_test(const char *tcp_ca, const struct bpf_map *sk_stg_map)
 			goto done;
 	}
 
-	err = pthread_create(&srv_thread, NULL, server, (void *)(long)lfd);
-	if (!ASSERT_OK(err, "pthread_create"))
-		goto done;
-
-	/* recv total_bytes */
-	while (bytes < total_bytes && !READ_ONCE(stop)) {
-		nr_recv = recv(fd, &batch,
-			       MIN(total_bytes - bytes, sizeof(batch)), 0);
-		if (nr_recv == -1 && errno == EINTR)
-			continue;
-		if (nr_recv == -1)
-			break;
-		bytes += nr_recv;
-	}
-
-	ASSERT_EQ(bytes, total_bytes, "recv");
-
-	WRITE_ONCE(stop, 1);
-	pthread_join(srv_thread, &thread_ret);
-	ASSERT_OK(IS_ERR(thread_ret), "thread_ret");
+	ASSERT_OK(send_recv_data(lfd, fd, total_bytes), "send_recv_data");
 
 done:
 	close(lfd);
@@ -315,7 +230,7 @@ static void test_rel_setsockopt(void)
 	struct bpf_dctcp_release *rel_skel;
 	libbpf_print_fn_t old_print_fn;
 
-	err_str = "unknown func bpf_setsockopt";
+	err_str = "program of this type cannot use helper bpf_setsockopt";
 	found = false;
 
 	old_print_fn = libbpf_set_print(libbpf_debug_print);
@@ -529,6 +444,36 @@ static void test_link_replace(void)
 	tcp_ca_update__destroy(skel);
 }
 
+static void test_tcp_ca_kfunc(void)
+{
+	struct tcp_ca_kfunc *skel;
+
+	skel = tcp_ca_kfunc__open_and_load();
+	ASSERT_OK_PTR(skel, "tcp_ca_kfunc__open_and_load");
+	tcp_ca_kfunc__destroy(skel);
+}
+
+static void test_cc_cubic(void)
+{
+	struct bpf_cc_cubic *cc_cubic_skel;
+	struct bpf_link *link;
+
+	cc_cubic_skel = bpf_cc_cubic__open_and_load();
+	if (!ASSERT_OK_PTR(cc_cubic_skel, "bpf_cc_cubic__open_and_load"))
+		return;
+
+	link = bpf_map__attach_struct_ops(cc_cubic_skel->maps.cc_cubic);
+	if (!ASSERT_OK_PTR(link, "bpf_map__attach_struct_ops")) {
+		bpf_cc_cubic__destroy(cc_cubic_skel);
+		return;
+	}
+
+	do_test("bpf_cc_cubic", NULL);
+
+	bpf_link__destroy(link);
+	bpf_cc_cubic__destroy(cc_cubic_skel);
+}
+
 void test_bpf_tcp_ca(void)
 {
 	if (test__start_subtest("dctcp"))
@@ -557,4 +502,8 @@ void test_bpf_tcp_ca(void)
 		test_multi_links();
 	if (test__start_subtest("link_replace"))
 		test_link_replace();
+	if (test__start_subtest("tcp_ca_kfunc"))
+		test_tcp_ca_kfunc();
+	if (test__start_subtest("cc_cubic"))
+		test_cc_cubic();
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
index a8b53b8736f0..f66ceccd7029 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
@@ -25,7 +25,7 @@ static void test_lookup_update(void)
 	int map1_fd, map2_fd, map3_fd, map4_fd, map5_fd, map1_id, map2_id;
 	int outer_arr_fd, outer_hash_fd, outer_arr_dyn_fd;
 	struct test_btf_map_in_map *skel;
-	int err, key = 0, val, i, fd;
+	int err, key = 0, val, i;
 
 	skel = test_btf_map_in_map__open_and_load();
 	if (CHECK(!skel, "skel_open", "failed to open&load skeleton\n"))
@@ -102,30 +102,6 @@ static void test_lookup_update(void)
 	CHECK(map1_id == 0, "map1_id", "failed to get ID 1\n");
 	CHECK(map2_id == 0, "map2_id", "failed to get ID 2\n");
 
-	test_btf_map_in_map__destroy(skel);
-	skel = NULL;
-
-	/* we need to either wait for or force synchronize_rcu(), before
-	 * checking for "still exists" condition, otherwise map could still be
-	 * resolvable by ID, causing false positives.
-	 *
-	 * Older kernels (5.8 and earlier) freed map only after two
-	 * synchronize_rcu()s, so trigger two, to be entirely sure.
-	 */
-	CHECK(kern_sync_rcu(), "sync_rcu", "failed\n");
-	CHECK(kern_sync_rcu(), "sync_rcu", "failed\n");
-
-	fd = bpf_map_get_fd_by_id(map1_id);
-	if (CHECK(fd >= 0, "map1_leak", "inner_map1 leaked!\n")) {
-		close(fd);
-		goto cleanup;
-	}
-	fd = bpf_map_get_fd_by_id(map2_id);
-	if (CHECK(fd >= 0, "map2_leak", "inner_map2 leaked!\n")) {
-		close(fd);
-		goto cleanup;
-	}
-
 cleanup:
 	test_btf_map_in_map__destroy(skel);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/cgroup1_hierarchy.c b/tools/testing/selftests/bpf/prog_tests/cgroup1_hierarchy.c
index 74d6d7546f40..25332e596750 100644
--- a/tools/testing/selftests/bpf/prog_tests/cgroup1_hierarchy.c
+++ b/tools/testing/selftests/bpf/prog_tests/cgroup1_hierarchy.c
@@ -87,9 +87,12 @@ void test_cgroup1_hierarchy(void)
 		goto destroy;
 
 	/* Setup cgroup1 hierarchy */
+	err = setup_cgroup_environment();
+	if (!ASSERT_OK(err, "setup_cgroup_environment"))
+		goto destroy;
 	err = setup_classid_environment();
 	if (!ASSERT_OK(err, "setup_classid_environment"))
-		goto destroy;
+		goto cleanup_cgroup;
 
 	err = join_classid();
 	if (!ASSERT_OK(err, "join_cgroup1"))
@@ -153,6 +156,8 @@ void test_cgroup1_hierarchy(void)
 
 cleanup:
 	cleanup_classid_environment();
+cleanup_cgroup:
+	cleanup_cgroup_environment();
 destroy:
 	test_cgroup1_hierarchy__destroy(skel);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/cls_redirect.c b/tools/testing/selftests/bpf/prog_tests/cls_redirect.c
index 2a55f717fc07..34b59f6baca1 100644
--- a/tools/testing/selftests/bpf/prog_tests/cls_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/cls_redirect.c
@@ -10,6 +10,7 @@
 #include <netinet/tcp.h>
 
 #include <test_progs.h>
+#include "network_helpers.h"
 
 #include "progs/test_cls_redirect.h"
 #include "test_cls_redirect.skel.h"
@@ -35,39 +36,6 @@ struct tuple {
 	struct addr_port dst;
 };
 
-static int start_server(const struct sockaddr *addr, socklen_t len, int type)
-{
-	int fd = socket(addr->sa_family, type, 0);
-	if (CHECK_FAIL(fd == -1))
-		return -1;
-	if (CHECK_FAIL(bind(fd, addr, len) == -1))
-		goto err;
-	if (type == SOCK_STREAM && CHECK_FAIL(listen(fd, 128) == -1))
-		goto err;
-
-	return fd;
-
-err:
-	close(fd);
-	return -1;
-}
-
-static int connect_to_server(const struct sockaddr *addr, socklen_t len,
-			     int type)
-{
-	int fd = socket(addr->sa_family, type, 0);
-	if (CHECK_FAIL(fd == -1))
-		return -1;
-	if (CHECK_FAIL(connect(fd, addr, len)))
-		goto err;
-
-	return fd;
-
-err:
-	close(fd);
-	return -1;
-}
-
 static bool fill_addr_port(const struct sockaddr *sa, struct addr_port *ap)
 {
 	const struct sockaddr_in6 *in6;
@@ -98,14 +66,14 @@ static bool set_up_conn(const struct sockaddr *addr, socklen_t len, int type,
 	socklen_t slen = sizeof(ss);
 	struct sockaddr *sa = (struct sockaddr *)&ss;
 
-	*server = start_server(addr, len, type);
+	*server = start_server_addr(type, (struct sockaddr_storage *)addr, len, NULL);
 	if (*server < 0)
 		return false;
 
 	if (CHECK_FAIL(getsockname(*server, sa, &slen)))
 		goto close_server;
 
-	*conn = connect_to_server(sa, slen, type);
+	*conn = connect_to_addr(type, (struct sockaddr_storage *)sa, slen, NULL);
 	if (*conn < 0)
 		goto close_server;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/crypto_sanity.c b/tools/testing/selftests/bpf/prog_tests/crypto_sanity.c
new file mode 100644
index 000000000000..b1a3a49a822a
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/crypto_sanity.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <net/if.h>
+#include <linux/in6.h>
+#include <linux/if_alg.h>
+
+#include "test_progs.h"
+#include "network_helpers.h"
+#include "crypto_sanity.skel.h"
+#include "crypto_basic.skel.h"
+
+#define NS_TEST "crypto_sanity_ns"
+#define IPV6_IFACE_ADDR "face::1"
+static const unsigned char crypto_key[] = "testtest12345678";
+static const char plain_text[] = "stringtoencrypt0";
+static int opfd = -1, tfmfd = -1;
+static const char algo[] = "ecb(aes)";
+static int init_afalg(void)
+{
+	struct sockaddr_alg sa = {
+		.salg_family = AF_ALG,
+		.salg_type = "skcipher",
+		.salg_name = "ecb(aes)"
+	};
+
+	tfmfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
+	if (tfmfd == -1)
+		return errno;
+	if (bind(tfmfd, (struct sockaddr *)&sa, sizeof(sa)) == -1)
+		return errno;
+	if (setsockopt(tfmfd, SOL_ALG, ALG_SET_KEY, crypto_key, 16) == -1)
+		return errno;
+	opfd = accept(tfmfd, NULL, 0);
+	if (opfd == -1)
+		return errno;
+	return 0;
+}
+
+static void deinit_afalg(void)
+{
+	if (tfmfd != -1)
+		close(tfmfd);
+	if (opfd != -1)
+		close(opfd);
+}
+
+static void do_crypt_afalg(const void *src, void *dst, int size, bool encrypt)
+{
+	struct msghdr msg = {};
+	struct cmsghdr *cmsg;
+	char cbuf[CMSG_SPACE(4)] = {0};
+	struct iovec iov;
+
+	msg.msg_control = cbuf;
+	msg.msg_controllen = sizeof(cbuf);
+
+	cmsg = CMSG_FIRSTHDR(&msg);
+	cmsg->cmsg_level = SOL_ALG;
+	cmsg->cmsg_type = ALG_SET_OP;
+	cmsg->cmsg_len = CMSG_LEN(4);
+	*(__u32 *)CMSG_DATA(cmsg) = encrypt ? ALG_OP_ENCRYPT : ALG_OP_DECRYPT;
+
+	iov.iov_base = (char *)src;
+	iov.iov_len = size;
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	sendmsg(opfd, &msg, 0);
+	read(opfd, dst, size);
+}
+
+void test_crypto_basic(void)
+{
+	RUN_TESTS(crypto_basic);
+}
+
+void test_crypto_sanity(void)
+{
+	LIBBPF_OPTS(bpf_tc_hook, qdisc_hook, .attach_point = BPF_TC_EGRESS);
+	LIBBPF_OPTS(bpf_tc_opts, tc_attach_enc);
+	LIBBPF_OPTS(bpf_tc_opts, tc_attach_dec);
+	LIBBPF_OPTS(bpf_test_run_opts, opts);
+	struct nstoken *nstoken = NULL;
+	struct crypto_sanity *skel;
+	char afalg_plain[16] = {0};
+	char afalg_dst[16] = {0};
+	struct sockaddr_in6 addr;
+	int sockfd, err, pfd;
+	socklen_t addrlen;
+	u16 udp_test_port;
+
+	skel = crypto_sanity__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "skel open"))
+		return;
+
+	SYS(fail, "ip netns add %s", NS_TEST);
+	SYS(fail, "ip -net %s -6 addr add %s/128 dev lo nodad", NS_TEST, IPV6_IFACE_ADDR);
+	SYS(fail, "ip -net %s link set dev lo up", NS_TEST);
+
+	nstoken = open_netns(NS_TEST);
+	if (!ASSERT_OK_PTR(nstoken, "open_netns"))
+		goto fail;
+
+	err = init_afalg();
+	if (!ASSERT_OK(err, "AF_ALG init fail"))
+		goto fail;
+
+	qdisc_hook.ifindex = if_nametoindex("lo");
+	if (!ASSERT_GT(qdisc_hook.ifindex, 0, "if_nametoindex lo"))
+		goto fail;
+
+	skel->bss->key_len = 16;
+	skel->bss->authsize = 0;
+	udp_test_port = skel->data->udp_test_port;
+	memcpy(skel->bss->key, crypto_key, sizeof(crypto_key));
+	snprintf(skel->bss->algo, 128, "%s", algo);
+	pfd = bpf_program__fd(skel->progs.skb_crypto_setup);
+	if (!ASSERT_GT(pfd, 0, "skb_crypto_setup fd"))
+		goto fail;
+
+	err = bpf_prog_test_run_opts(pfd, &opts);
+	if (!ASSERT_OK(err, "skb_crypto_setup") ||
+	    !ASSERT_OK(opts.retval, "skb_crypto_setup retval"))
+		goto fail;
+
+	if (!ASSERT_OK(skel->bss->status, "skb_crypto_setup status"))
+		goto fail;
+
+	err = bpf_tc_hook_create(&qdisc_hook);
+	if (!ASSERT_OK(err, "create qdisc hook"))
+		goto fail;
+
+	addrlen = sizeof(addr);
+	err = make_sockaddr(AF_INET6, IPV6_IFACE_ADDR, udp_test_port,
+			    (void *)&addr, &addrlen);
+	if (!ASSERT_OK(err, "make_sockaddr"))
+		goto fail;
+
+	tc_attach_enc.prog_fd = bpf_program__fd(skel->progs.encrypt_sanity);
+	err = bpf_tc_attach(&qdisc_hook, &tc_attach_enc);
+	if (!ASSERT_OK(err, "attach encrypt filter"))
+		goto fail;
+
+	sockfd = socket(AF_INET6, SOCK_DGRAM, 0);
+	if (!ASSERT_NEQ(sockfd, -1, "encrypt socket"))
+		goto fail;
+	err = sendto(sockfd, plain_text, sizeof(plain_text), 0, (void *)&addr, addrlen);
+	close(sockfd);
+	if (!ASSERT_EQ(err, sizeof(plain_text), "encrypt send"))
+		goto fail;
+
+	do_crypt_afalg(plain_text, afalg_dst, sizeof(afalg_dst), true);
+
+	if (!ASSERT_OK(skel->bss->status, "encrypt status"))
+		goto fail;
+	if (!ASSERT_STRNEQ(skel->bss->dst, afalg_dst, sizeof(afalg_dst), "encrypt AF_ALG"))
+		goto fail;
+
+	tc_attach_enc.flags = tc_attach_enc.prog_fd = tc_attach_enc.prog_id = 0;
+	err = bpf_tc_detach(&qdisc_hook, &tc_attach_enc);
+	if (!ASSERT_OK(err, "bpf_tc_detach encrypt"))
+		goto fail;
+
+	tc_attach_dec.prog_fd = bpf_program__fd(skel->progs.decrypt_sanity);
+	err = bpf_tc_attach(&qdisc_hook, &tc_attach_dec);
+	if (!ASSERT_OK(err, "attach decrypt filter"))
+		goto fail;
+
+	sockfd = socket(AF_INET6, SOCK_DGRAM, 0);
+	if (!ASSERT_NEQ(sockfd, -1, "decrypt socket"))
+		goto fail;
+	err = sendto(sockfd, afalg_dst, sizeof(afalg_dst), 0, (void *)&addr, addrlen);
+	close(sockfd);
+	if (!ASSERT_EQ(err, sizeof(afalg_dst), "decrypt send"))
+		goto fail;
+
+	do_crypt_afalg(afalg_dst, afalg_plain, sizeof(afalg_plain), false);
+
+	if (!ASSERT_OK(skel->bss->status, "decrypt status"))
+		goto fail;
+	if (!ASSERT_STRNEQ(skel->bss->dst, afalg_plain, sizeof(afalg_plain), "decrypt AF_ALG"))
+		goto fail;
+
+	tc_attach_dec.flags = tc_attach_dec.prog_fd = tc_attach_dec.prog_id = 0;
+	err = bpf_tc_detach(&qdisc_hook, &tc_attach_dec);
+	ASSERT_OK(err, "bpf_tc_detach decrypt");
+
+fail:
+	close_netns(nstoken);
+	deinit_afalg();
+	SYS_NOFAIL("ip netns del " NS_TEST " &> /dev/null");
+	crypto_sanity__destroy(skel);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/dummy_st_ops.c b/tools/testing/selftests/bpf/prog_tests/dummy_st_ops.c
index f43fcb13d2c4..d3d94596ab79 100644
--- a/tools/testing/selftests/bpf/prog_tests/dummy_st_ops.c
+++ b/tools/testing/selftests/bpf/prog_tests/dummy_st_ops.c
@@ -98,7 +98,8 @@ done:
 
 static void test_dummy_multiple_args(void)
 {
-	__u64 args[5] = {0, -100, 0x8a5f, 'c', 0x1234567887654321ULL};
+	struct bpf_dummy_ops_state st = { 7 };
+	__u64 args[5] = {(__u64)&st, -100, 0x8a5f, 'c', 0x1234567887654321ULL};
 	LIBBPF_OPTS(bpf_test_run_opts, attr,
 		.ctx_in = args,
 		.ctx_size_in = sizeof(args),
@@ -115,6 +116,7 @@ static void test_dummy_multiple_args(void)
 	fd = bpf_program__fd(skel->progs.test_2);
 	err = bpf_prog_test_run_opts(fd, &attr);
 	ASSERT_OK(err, "test_run");
+	args[0] = 7;
 	for (i = 0; i < ARRAY_SIZE(args); i++) {
 		snprintf(name, sizeof(name), "arg %zu", i);
 		ASSERT_EQ(skel->bss->test_2_args[i], args[i], name);
@@ -125,7 +127,8 @@ static void test_dummy_multiple_args(void)
 
 static void test_dummy_sleepable(void)
 {
-	__u64 args[1] = {0};
+	struct bpf_dummy_ops_state st;
+	__u64 args[1] = {(__u64)&st};
 	LIBBPF_OPTS(bpf_test_run_opts, attr,
 		.ctx_in = args,
 		.ctx_size_in = sizeof(args),
@@ -144,6 +147,31 @@ static void test_dummy_sleepable(void)
 	dummy_st_ops_success__destroy(skel);
 }
 
+/* dummy_st_ops.test_sleepable() parameter is not marked as nullable,
+ * thus bpf_prog_test_run_opts() below should be rejected as it tries
+ * to pass NULL for this parameter.
+ */
+static void test_dummy_sleepable_reject_null(void)
+{
+	__u64 args[1] = {0};
+	LIBBPF_OPTS(bpf_test_run_opts, attr,
+		.ctx_in = args,
+		.ctx_size_in = sizeof(args),
+	);
+	struct dummy_st_ops_success *skel;
+	int fd, err;
+
+	skel = dummy_st_ops_success__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "dummy_st_ops_load"))
+		return;
+
+	fd = bpf_program__fd(skel->progs.test_sleepable);
+	err = bpf_prog_test_run_opts(fd, &attr);
+	ASSERT_EQ(err, -EINVAL, "test_run");
+
+	dummy_st_ops_success__destroy(skel);
+}
+
 void test_dummy_st_ops(void)
 {
 	if (test__start_subtest("dummy_st_ops_attach"))
@@ -156,6 +184,8 @@ void test_dummy_st_ops(void)
 		test_dummy_multiple_args();
 	if (test__start_subtest("dummy_sleepable"))
 		test_dummy_sleepable();
+	if (test__start_subtest("dummy_sleepable_reject_null"))
+		test_dummy_sleepable_reject_null();
 
 	RUN_TESTS(dummy_st_ops_fail);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/empty_skb.c b/tools/testing/selftests/bpf/prog_tests/empty_skb.c
index 261228eb68e8..438583e1f2d1 100644
--- a/tools/testing/selftests/bpf/prog_tests/empty_skb.c
+++ b/tools/testing/selftests/bpf/prog_tests/empty_skb.c
@@ -94,6 +94,8 @@ void test_empty_skb(void)
 
 	SYS(out, "ip netns add empty_skb");
 	tok = open_netns("empty_skb");
+	if (!ASSERT_OK_PTR(tok, "setns"))
+		goto out;
 	SYS(out, "ip link add veth0 type veth peer veth1");
 	SYS(out, "ip link set dev veth0 up");
 	SYS(out, "ip link set dev veth1 up");
diff --git a/tools/testing/selftests/bpf/prog_tests/fib_lookup.c b/tools/testing/selftests/bpf/prog_tests/fib_lookup.c
index 3379df2d4cf2..bd7658958004 100644
--- a/tools/testing/selftests/bpf/prog_tests/fib_lookup.c
+++ b/tools/testing/selftests/bpf/prog_tests/fib_lookup.c
@@ -26,6 +26,17 @@
 #define IPV6_TBID_ADDR		"fd00::FFFF"
 #define IPV6_TBID_NET		"fd00::"
 #define IPV6_TBID_DST		"fd00::2"
+#define MARK_NO_POLICY		33
+#define MARK			42
+#define MARK_TABLE		"200"
+#define IPV4_REMOTE_DST		"1.2.3.4"
+#define IPV4_LOCAL		"10.4.0.3"
+#define IPV4_GW1		"10.4.0.1"
+#define IPV4_GW2		"10.4.0.2"
+#define IPV6_REMOTE_DST		"be:ef::b0:10"
+#define IPV6_LOCAL		"fd01::3"
+#define IPV6_GW1		"fd01::1"
+#define IPV6_GW2		"fd01::2"
 #define DMAC			"11:11:11:11:11:11"
 #define DMAC_INIT { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, }
 #define DMAC2			"01:01:01:01:01:01"
@@ -36,9 +47,11 @@ struct fib_lookup_test {
 	const char *daddr;
 	int expected_ret;
 	const char *expected_src;
+	const char *expected_dst;
 	int lookup_flags;
 	__u32 tbid;
 	__u8 dmac[6];
+	__u32 mark;
 };
 
 static const struct fib_lookup_test tests[] = {
@@ -90,10 +103,47 @@ static const struct fib_lookup_test tests[] = {
 	  .daddr = IPV6_ADDR_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
 	  .expected_src = IPV6_IFACE_ADDR_SEC,
 	  .lookup_flags = BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH, },
+	/* policy routing */
+	{ .desc = "IPv4 policy routing, default",
+	  .daddr = IPV4_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV4_GW1,
+	  .lookup_flags = BPF_FIB_LOOKUP_MARK | BPF_FIB_LOOKUP_SKIP_NEIGH, },
+	{ .desc = "IPv4 policy routing, mark doesn't point to a policy",
+	  .daddr = IPV4_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV4_GW1,
+	  .lookup_flags = BPF_FIB_LOOKUP_MARK | BPF_FIB_LOOKUP_SKIP_NEIGH,
+	  .mark = MARK_NO_POLICY, },
+	{ .desc = "IPv4 policy routing, mark points to a policy",
+	  .daddr = IPV4_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV4_GW2,
+	  .lookup_flags = BPF_FIB_LOOKUP_MARK | BPF_FIB_LOOKUP_SKIP_NEIGH,
+	  .mark = MARK, },
+	{ .desc = "IPv4 policy routing, mark points to a policy, but no flag",
+	  .daddr = IPV4_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV4_GW1,
+	  .lookup_flags = BPF_FIB_LOOKUP_SKIP_NEIGH,
+	  .mark = MARK, },
+	{ .desc = "IPv6 policy routing, default",
+	  .daddr = IPV6_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV6_GW1,
+	  .lookup_flags = BPF_FIB_LOOKUP_MARK | BPF_FIB_LOOKUP_SKIP_NEIGH, },
+	{ .desc = "IPv6 policy routing, mark doesn't point to a policy",
+	  .daddr = IPV6_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV6_GW1,
+	  .lookup_flags = BPF_FIB_LOOKUP_MARK | BPF_FIB_LOOKUP_SKIP_NEIGH,
+	  .mark = MARK_NO_POLICY, },
+	{ .desc = "IPv6 policy routing, mark points to a policy",
+	  .daddr = IPV6_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV6_GW2,
+	  .lookup_flags = BPF_FIB_LOOKUP_MARK | BPF_FIB_LOOKUP_SKIP_NEIGH,
+	  .mark = MARK, },
+	{ .desc = "IPv6 policy routing, mark points to a policy, but no flag",
+	  .daddr = IPV6_REMOTE_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_dst = IPV6_GW1,
+	  .lookup_flags = BPF_FIB_LOOKUP_SKIP_NEIGH,
+	  .mark = MARK, },
 };
 
-static int ifindex;
-
 static int setup_netns(void)
 {
 	int err;
@@ -144,12 +194,24 @@ static int setup_netns(void)
 	if (!ASSERT_OK(err, "write_sysctl(net.ipv6.conf.veth1.forwarding)"))
 		goto fail;
 
+	/* Setup for policy routing tests */
+	SYS(fail, "ip addr add %s/24 dev veth1", IPV4_LOCAL);
+	SYS(fail, "ip addr add %s/64 dev veth1 nodad", IPV6_LOCAL);
+	SYS(fail, "ip route add %s/32 via %s", IPV4_REMOTE_DST, IPV4_GW1);
+	SYS(fail, "ip route add %s/32 via %s table %s", IPV4_REMOTE_DST, IPV4_GW2, MARK_TABLE);
+	SYS(fail, "ip -6 route add %s/128 via %s", IPV6_REMOTE_DST, IPV6_GW1);
+	SYS(fail, "ip -6 route add %s/128 via %s table %s", IPV6_REMOTE_DST, IPV6_GW2, MARK_TABLE);
+	SYS(fail, "ip rule add prio 2 fwmark %d lookup %s", MARK, MARK_TABLE);
+	SYS(fail, "ip -6 rule add prio 2 fwmark %d lookup %s", MARK, MARK_TABLE);
+
 	return 0;
 fail:
 	return -1;
 }
 
-static int set_lookup_params(struct bpf_fib_lookup *params, const struct fib_lookup_test *test)
+static int set_lookup_params(struct bpf_fib_lookup *params,
+			     const struct fib_lookup_test *test,
+			     int ifindex)
 {
 	int ret;
 
@@ -158,6 +220,7 @@ static int set_lookup_params(struct bpf_fib_lookup *params, const struct fib_loo
 	params->l4_protocol = IPPROTO_TCP;
 	params->ifindex = ifindex;
 	params->tbid = test->tbid;
+	params->mark = test->mark;
 
 	if (inet_pton(AF_INET6, test->daddr, params->ipv6_dst) == 1) {
 		params->family = AF_INET6;
@@ -190,40 +253,45 @@ static void mac_str(char *b, const __u8 *mac)
 		mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
 }
 
-static void assert_src_ip(struct bpf_fib_lookup *fib_params, const char *expected_src)
+static void assert_ip_address(int family, void *addr, const char *expected_str)
 {
+	char str[INET6_ADDRSTRLEN];
+	u8 expected_addr[16];
+	int addr_len = 0;
 	int ret;
-	__u32 src6[4];
-	__be32 src4;
 
-	switch (fib_params->family) {
+	switch (family) {
 	case AF_INET6:
-		ret = inet_pton(AF_INET6, expected_src, src6);
-		ASSERT_EQ(ret, 1, "inet_pton(expected_src)");
-
-		ret = memcmp(src6, fib_params->ipv6_src, sizeof(fib_params->ipv6_src));
-		if (!ASSERT_EQ(ret, 0, "fib_lookup ipv6 src")) {
-			char str_src6[64];
-
-			inet_ntop(AF_INET6, fib_params->ipv6_src, str_src6,
-				  sizeof(str_src6));
-			printf("ipv6 expected %s actual %s ", expected_src,
-			       str_src6);
-		}
-
+		ret = inet_pton(AF_INET6, expected_str, expected_addr);
+		ASSERT_EQ(ret, 1, "inet_pton(AF_INET6, expected_str)");
+		addr_len = 16;
 		break;
 	case AF_INET:
-		ret = inet_pton(AF_INET, expected_src, &src4);
-		ASSERT_EQ(ret, 1, "inet_pton(expected_src)");
-
-		ASSERT_EQ(fib_params->ipv4_src, src4, "fib_lookup ipv4 src");
-
+		ret = inet_pton(AF_INET, expected_str, expected_addr);
+		ASSERT_EQ(ret, 1, "inet_pton(AF_INET, expected_str)");
+		addr_len = 4;
 		break;
 	default:
-		PRINT_FAIL("invalid addr family: %d", fib_params->family);
+		PRINT_FAIL("invalid address family: %d", family);
+		break;
+	}
+
+	if (memcmp(addr, expected_addr, addr_len)) {
+		inet_ntop(family, addr, str, sizeof(str));
+		PRINT_FAIL("expected %s actual %s ", expected_str, str);
 	}
 }
 
+static void assert_src_ip(struct bpf_fib_lookup *params, const char *expected)
+{
+	assert_ip_address(params->family, params->ipv6_src, expected);
+}
+
+static void assert_dst_ip(struct bpf_fib_lookup *params, const char *expected)
+{
+	assert_ip_address(params->family, params->ipv6_dst, expected);
+}
+
 void test_fib_lookup(void)
 {
 	struct bpf_fib_lookup *fib_params;
@@ -256,15 +324,18 @@ void test_fib_lookup(void)
 	if (setup_netns())
 		goto fail;
 
-	ifindex = if_nametoindex("veth1");
-	skb.ifindex = ifindex;
+	skb.ifindex = if_nametoindex("veth1");
+	if (!ASSERT_NEQ(skb.ifindex, 0, "if_nametoindex(veth1)"))
+		goto fail;
+
 	fib_params = &skel->bss->fib_params;
 
 	for (i = 0; i < ARRAY_SIZE(tests); i++) {
 		printf("Testing %s ", tests[i].desc);
 
-		if (set_lookup_params(fib_params, &tests[i]))
+		if (set_lookup_params(fib_params, &tests[i], skb.ifindex))
 			continue;
+
 		skel->bss->fib_lookup_ret = -1;
 		skel->bss->lookup_flags = tests[i].lookup_flags;
 
@@ -278,6 +349,9 @@ void test_fib_lookup(void)
 		if (tests[i].expected_src)
 			assert_src_ip(fib_params, tests[i].expected_src);
 
+		if (tests[i].expected_dst)
+			assert_dst_ip(fib_params, tests[i].expected_dst);
+
 		ret = memcmp(tests[i].dmac, fib_params->dmac, sizeof(tests[i].dmac));
 		if (!ASSERT_EQ(ret, 0, "dmac not match")) {
 			char expected[18], actual[18];
diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
index c4773173a4e4..9e5f38739104 100644
--- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
+++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
@@ -2,7 +2,6 @@
 #include <test_progs.h>
 #include <network_helpers.h>
 #include <error.h>
-#include <linux/if.h>
 #include <linux/if_tun.h>
 #include <sys/uio.h>
 
diff --git a/tools/testing/selftests/bpf/prog_tests/for_each.c b/tools/testing/selftests/bpf/prog_tests/for_each.c
index 8963f8a549f2..09f6487f58b9 100644
--- a/tools/testing/selftests/bpf/prog_tests/for_each.c
+++ b/tools/testing/selftests/bpf/prog_tests/for_each.c
@@ -5,6 +5,7 @@
 #include "for_each_hash_map_elem.skel.h"
 #include "for_each_array_map_elem.skel.h"
 #include "for_each_map_elem_write_key.skel.h"
+#include "for_each_multi_maps.skel.h"
 
 static unsigned int duration;
 
@@ -143,6 +144,65 @@ static void test_write_map_key(void)
 		for_each_map_elem_write_key__destroy(skel);
 }
 
+static void test_multi_maps(void)
+{
+	struct for_each_multi_maps *skel;
+	__u64 val, array_total, hash_total;
+	__u32 key, max_entries;
+	int i, err;
+
+	LIBBPF_OPTS(bpf_test_run_opts, topts,
+		.data_in = &pkt_v4,
+		.data_size_in = sizeof(pkt_v4),
+		.repeat = 1,
+	);
+
+	skel = for_each_multi_maps__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "for_each_multi_maps__open_and_load"))
+		return;
+
+	array_total = 0;
+	max_entries = bpf_map__max_entries(skel->maps.arraymap);
+	for (i = 0; i < max_entries; i++) {
+		key = i;
+		val = i + 1;
+		array_total += val;
+		err = bpf_map__update_elem(skel->maps.arraymap, &key, sizeof(key),
+					   &val, sizeof(val), BPF_ANY);
+		if (!ASSERT_OK(err, "array_map_update"))
+			goto out;
+	}
+
+	hash_total = 0;
+	max_entries = bpf_map__max_entries(skel->maps.hashmap);
+	for (i = 0; i < max_entries; i++) {
+		key = i + 100;
+		val = i + 1;
+		hash_total += val;
+		err = bpf_map__update_elem(skel->maps.hashmap, &key, sizeof(key),
+					   &val, sizeof(val), BPF_ANY);
+		if (!ASSERT_OK(err, "hash_map_update"))
+			goto out;
+	}
+
+	skel->bss->data_output = 0;
+	skel->bss->use_array = 1;
+	err = bpf_prog_test_run_opts(bpf_program__fd(skel->progs.test_pkt_access), &topts);
+	ASSERT_OK(err, "bpf_prog_test_run_opts");
+	ASSERT_OK(topts.retval, "retval");
+	ASSERT_EQ(skel->bss->data_output, array_total, "array output");
+
+	skel->bss->data_output = 0;
+	skel->bss->use_array = 0;
+	err = bpf_prog_test_run_opts(bpf_program__fd(skel->progs.test_pkt_access), &topts);
+	ASSERT_OK(err, "bpf_prog_test_run_opts");
+	ASSERT_OK(topts.retval, "retval");
+	ASSERT_EQ(skel->bss->data_output, hash_total, "hash output");
+
+out:
+	for_each_multi_maps__destroy(skel);
+}
+
 void test_for_each(void)
 {
 	if (test__start_subtest("hash_map"))
@@ -151,4 +211,6 @@ void test_for_each(void)
 		test_array_map();
 	if (test__start_subtest("write_map_key"))
 		test_write_map_key();
+	if (test__start_subtest("multi_maps"))
+		test_multi_maps();
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/ip_check_defrag.c b/tools/testing/selftests/bpf/prog_tests/ip_check_defrag.c
index 8dd2af9081f4..284764e7179f 100644
--- a/tools/testing/selftests/bpf/prog_tests/ip_check_defrag.c
+++ b/tools/testing/selftests/bpf/prog_tests/ip_check_defrag.c
@@ -88,6 +88,8 @@ static int attach(struct ip_check_defrag *skel, bool ipv6)
 	int err = -1;
 
 	nstoken = open_netns(NS1);
+	if (!ASSERT_OK_PTR(nstoken, "setns"))
+		goto out;
 
 	skel->links.defrag = bpf_program__attach_netfilter(skel->progs.defrag, &opts);
 	if (!ASSERT_OK_PTR(skel->links.defrag, "program attach"))
diff --git a/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c b/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c
index 05000810e28e..960c9323d1e0 100644
--- a/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c
+++ b/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c
@@ -4,6 +4,8 @@
 #include "trace_helpers.h"
 #include "kprobe_multi_empty.skel.h"
 #include "kprobe_multi_override.skel.h"
+#include "kprobe_multi_session.skel.h"
+#include "kprobe_multi_session_cookie.skel.h"
 #include "bpf/libbpf_internal.h"
 #include "bpf/hashmap.h"
 
@@ -326,6 +328,74 @@ cleanup:
 	kprobe_multi__destroy(skel);
 }
 
+static void test_session_skel_api(void)
+{
+	struct kprobe_multi_session *skel = NULL;
+	LIBBPF_OPTS(bpf_kprobe_multi_opts, opts);
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	struct bpf_link *link = NULL;
+	int i, err, prog_fd;
+
+	skel = kprobe_multi_session__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "kprobe_multi_session__open_and_load"))
+		return;
+
+	skel->bss->pid = getpid();
+
+	err = kprobe_multi_session__attach(skel);
+	if (!ASSERT_OK(err, " kprobe_multi_session__attach"))
+		goto cleanup;
+
+	prog_fd = bpf_program__fd(skel->progs.trigger);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	ASSERT_OK(err, "test_run");
+	ASSERT_EQ(topts.retval, 0, "test_run");
+
+	/* bpf_fentry_test1-4 trigger return probe, result is 2 */
+	for (i = 0; i < 4; i++)
+		ASSERT_EQ(skel->bss->kprobe_session_result[i], 2, "kprobe_session_result");
+
+	/* bpf_fentry_test5-8 trigger only entry probe, result is 1 */
+	for (i = 4; i < 8; i++)
+		ASSERT_EQ(skel->bss->kprobe_session_result[i], 1, "kprobe_session_result");
+
+cleanup:
+	bpf_link__destroy(link);
+	kprobe_multi_session__destroy(skel);
+}
+
+static void test_session_cookie_skel_api(void)
+{
+	struct kprobe_multi_session_cookie *skel = NULL;
+	LIBBPF_OPTS(bpf_kprobe_multi_opts, opts);
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	struct bpf_link *link = NULL;
+	int err, prog_fd;
+
+	skel = kprobe_multi_session_cookie__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "fentry_raw_skel_load"))
+		return;
+
+	skel->bss->pid = getpid();
+
+	err = kprobe_multi_session_cookie__attach(skel);
+	if (!ASSERT_OK(err, " kprobe_multi_wrapper__attach"))
+		goto cleanup;
+
+	prog_fd = bpf_program__fd(skel->progs.trigger);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	ASSERT_OK(err, "test_run");
+	ASSERT_EQ(topts.retval, 0, "test_run");
+
+	ASSERT_EQ(skel->bss->test_kprobe_1_result, 1, "test_kprobe_1_result");
+	ASSERT_EQ(skel->bss->test_kprobe_2_result, 2, "test_kprobe_2_result");
+	ASSERT_EQ(skel->bss->test_kprobe_3_result, 3, "test_kprobe_3_result");
+
+cleanup:
+	bpf_link__destroy(link);
+	kprobe_multi_session_cookie__destroy(skel);
+}
+
 static size_t symbol_hash(long key, void *ctx __maybe_unused)
 {
 	return str_hash((const char *) key);
@@ -336,15 +406,80 @@ static bool symbol_equal(long key1, long key2, void *ctx __maybe_unused)
 	return strcmp((const char *) key1, (const char *) key2) == 0;
 }
 
+static bool is_invalid_entry(char *buf, bool kernel)
+{
+	if (kernel && strchr(buf, '['))
+		return true;
+	if (!kernel && !strchr(buf, '['))
+		return true;
+	return false;
+}
+
+static bool skip_entry(char *name)
+{
+	/*
+	 * We attach to almost all kernel functions and some of them
+	 * will cause 'suspicious RCU usage' when fprobe is attached
+	 * to them. Filter out the current culprits - arch_cpu_idle
+	 * default_idle and rcu_* functions.
+	 */
+	if (!strcmp(name, "arch_cpu_idle"))
+		return true;
+	if (!strcmp(name, "default_idle"))
+		return true;
+	if (!strncmp(name, "rcu_", 4))
+		return true;
+	if (!strcmp(name, "bpf_dispatcher_xdp_func"))
+		return true;
+	if (!strncmp(name, "__ftrace_invalid_address__",
+		     sizeof("__ftrace_invalid_address__") - 1))
+		return true;
+	return false;
+}
+
+/* Do comparision by ignoring '.llvm.<hash>' suffixes. */
+static int compare_name(const char *name1, const char *name2)
+{
+	const char *res1, *res2;
+	int len1, len2;
+
+	res1 = strstr(name1, ".llvm.");
+	res2 = strstr(name2, ".llvm.");
+	len1 = res1 ? res1 - name1 : strlen(name1);
+	len2 = res2 ? res2 - name2 : strlen(name2);
+
+	if (len1 == len2)
+		return strncmp(name1, name2, len1);
+	if (len1 < len2)
+		return strncmp(name1, name2, len1) <= 0 ? -1 : 1;
+	return strncmp(name1, name2, len2) >= 0 ? 1 : -1;
+}
+
+static int load_kallsyms_compare(const void *p1, const void *p2)
+{
+	return compare_name(((const struct ksym *)p1)->name, ((const struct ksym *)p2)->name);
+}
+
+static int search_kallsyms_compare(const void *p1, const struct ksym *p2)
+{
+	return compare_name(p1, p2->name);
+}
+
 static int get_syms(char ***symsp, size_t *cntp, bool kernel)
 {
-	size_t cap = 0, cnt = 0, i;
-	char *name = NULL, **syms = NULL;
+	size_t cap = 0, cnt = 0;
+	char *name = NULL, *ksym_name, **syms = NULL;
 	struct hashmap *map;
+	struct ksyms *ksyms;
+	struct ksym *ks;
 	char buf[256];
 	FILE *f;
 	int err = 0;
 
+	ksyms = load_kallsyms_custom_local(load_kallsyms_compare);
+	if (!ASSERT_OK_PTR(ksyms, "load_kallsyms_custom_local"))
+		return -EINVAL;
+
 	/*
 	 * The available_filter_functions contains many duplicates,
 	 * but other than that all symbols are usable in kprobe multi
@@ -368,33 +503,23 @@ static int get_syms(char ***symsp, size_t *cntp, bool kernel)
 	}
 
 	while (fgets(buf, sizeof(buf), f)) {
-		if (kernel && strchr(buf, '['))
-			continue;
-		if (!kernel && !strchr(buf, '['))
+		if (is_invalid_entry(buf, kernel))
 			continue;
 
 		free(name);
 		if (sscanf(buf, "%ms$*[^\n]\n", &name) != 1)
 			continue;
-		/*
-		 * We attach to almost all kernel functions and some of them
-		 * will cause 'suspicious RCU usage' when fprobe is attached
-		 * to them. Filter out the current culprits - arch_cpu_idle
-		 * default_idle and rcu_* functions.
-		 */
-		if (!strcmp(name, "arch_cpu_idle"))
-			continue;
-		if (!strcmp(name, "default_idle"))
-			continue;
-		if (!strncmp(name, "rcu_", 4))
-			continue;
-		if (!strcmp(name, "bpf_dispatcher_xdp_func"))
-			continue;
-		if (!strncmp(name, "__ftrace_invalid_address__",
-			     sizeof("__ftrace_invalid_address__") - 1))
+		if (skip_entry(name))
 			continue;
 
-		err = hashmap__add(map, name, 0);
+		ks = search_kallsyms_custom_local(ksyms, name, search_kallsyms_compare);
+		if (!ks) {
+			err = -EINVAL;
+			goto error;
+		}
+
+		ksym_name = ks->name;
+		err = hashmap__add(map, ksym_name, 0);
 		if (err == -EEXIST) {
 			err = 0;
 			continue;
@@ -407,8 +532,7 @@ static int get_syms(char ***symsp, size_t *cntp, bool kernel)
 		if (err)
 			goto error;
 
-		syms[cnt++] = name;
-		name = NULL;
+		syms[cnt++] = ksym_name;
 	}
 
 	*symsp = syms;
@@ -418,42 +542,88 @@ error:
 	free(name);
 	fclose(f);
 	hashmap__free(map);
-	if (err) {
-		for (i = 0; i < cnt; i++)
-			free(syms[i]);
+	if (err)
 		free(syms);
+	return err;
+}
+
+static int get_addrs(unsigned long **addrsp, size_t *cntp, bool kernel)
+{
+	unsigned long *addr, *addrs, *tmp_addrs;
+	int err = 0, max_cnt, inc_cnt;
+	char *name = NULL;
+	size_t cnt = 0;
+	char buf[256];
+	FILE *f;
+
+	if (access("/sys/kernel/tracing/trace", F_OK) == 0)
+		f = fopen("/sys/kernel/tracing/available_filter_functions_addrs", "r");
+	else
+		f = fopen("/sys/kernel/debug/tracing/available_filter_functions_addrs", "r");
+
+	if (!f)
+		return -ENOENT;
+
+	/* In my local setup, the number of entries is 50k+ so Let us initially
+	 * allocate space to hold 64k entries. If 64k is not enough, incrementally
+	 * increase 1k each time.
+	 */
+	max_cnt = 65536;
+	inc_cnt = 1024;
+	addrs = malloc(max_cnt * sizeof(long));
+	if (addrs == NULL) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	while (fgets(buf, sizeof(buf), f)) {
+		if (is_invalid_entry(buf, kernel))
+			continue;
+
+		free(name);
+		if (sscanf(buf, "%p %ms$*[^\n]\n", &addr, &name) != 2)
+			continue;
+		if (skip_entry(name))
+			continue;
+
+		if (cnt == max_cnt) {
+			max_cnt += inc_cnt;
+			tmp_addrs = realloc(addrs, max_cnt);
+			if (!tmp_addrs) {
+				err = -ENOMEM;
+				goto error;
+			}
+			addrs = tmp_addrs;
+		}
+
+		addrs[cnt++] = (unsigned long)addr;
 	}
+
+	*addrsp = addrs;
+	*cntp = cnt;
+
+error:
+	free(name);
+	fclose(f);
+	if (err)
+		free(addrs);
 	return err;
 }
 
-static void test_kprobe_multi_bench_attach(bool kernel)
+static void do_bench_test(struct kprobe_multi_empty *skel, struct bpf_kprobe_multi_opts *opts)
 {
-	LIBBPF_OPTS(bpf_kprobe_multi_opts, opts);
-	struct kprobe_multi_empty *skel = NULL;
 	long attach_start_ns, attach_end_ns;
 	long detach_start_ns, detach_end_ns;
 	double attach_delta, detach_delta;
 	struct bpf_link *link = NULL;
-	char **syms = NULL;
-	size_t cnt = 0, i;
-
-	if (!ASSERT_OK(get_syms(&syms, &cnt, kernel), "get_syms"))
-		return;
-
-	skel = kprobe_multi_empty__open_and_load();
-	if (!ASSERT_OK_PTR(skel, "kprobe_multi_empty__open_and_load"))
-		goto cleanup;
-
-	opts.syms = (const char **) syms;
-	opts.cnt = cnt;
 
 	attach_start_ns = get_time_ns();
 	link = bpf_program__attach_kprobe_multi_opts(skel->progs.test_kprobe_empty,
-						     NULL, &opts);
+						     NULL, opts);
 	attach_end_ns = get_time_ns();
 
 	if (!ASSERT_OK_PTR(link, "bpf_program__attach_kprobe_multi_opts"))
-		goto cleanup;
+		return;
 
 	detach_start_ns = get_time_ns();
 	bpf_link__destroy(link);
@@ -462,17 +632,65 @@ static void test_kprobe_multi_bench_attach(bool kernel)
 	attach_delta = (attach_end_ns - attach_start_ns) / 1000000000.0;
 	detach_delta = (detach_end_ns - detach_start_ns) / 1000000000.0;
 
-	printf("%s: found %lu functions\n", __func__, cnt);
+	printf("%s: found %lu functions\n", __func__, opts->cnt);
 	printf("%s: attached in %7.3lfs\n", __func__, attach_delta);
 	printf("%s: detached in %7.3lfs\n", __func__, detach_delta);
+}
+
+static void test_kprobe_multi_bench_attach(bool kernel)
+{
+	LIBBPF_OPTS(bpf_kprobe_multi_opts, opts);
+	struct kprobe_multi_empty *skel = NULL;
+	char **syms = NULL;
+	size_t cnt = 0;
+
+	if (!ASSERT_OK(get_syms(&syms, &cnt, kernel), "get_syms"))
+		return;
+
+	skel = kprobe_multi_empty__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "kprobe_multi_empty__open_and_load"))
+		goto cleanup;
+
+	opts.syms = (const char **) syms;
+	opts.cnt = cnt;
+
+	do_bench_test(skel, &opts);
 
 cleanup:
 	kprobe_multi_empty__destroy(skel);
-	if (syms) {
-		for (i = 0; i < cnt; i++)
-			free(syms[i]);
+	if (syms)
 		free(syms);
+}
+
+static void test_kprobe_multi_bench_attach_addr(bool kernel)
+{
+	LIBBPF_OPTS(bpf_kprobe_multi_opts, opts);
+	struct kprobe_multi_empty *skel = NULL;
+	unsigned long *addrs = NULL;
+	size_t cnt = 0;
+	int err;
+
+	err = get_addrs(&addrs, &cnt, kernel);
+	if (err == -ENOENT) {
+		test__skip();
+		return;
 	}
+
+	if (!ASSERT_OK(err, "get_addrs"))
+		return;
+
+	skel = kprobe_multi_empty__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "kprobe_multi_empty__open_and_load"))
+		goto cleanup;
+
+	opts.addrs = addrs;
+	opts.cnt = cnt;
+
+	do_bench_test(skel, &opts);
+
+cleanup:
+	kprobe_multi_empty__destroy(skel);
+	free(addrs);
 }
 
 static void test_attach_override(void)
@@ -515,6 +733,10 @@ void serial_test_kprobe_multi_bench_attach(void)
 		test_kprobe_multi_bench_attach(true);
 	if (test__start_subtest("modules"))
 		test_kprobe_multi_bench_attach(false);
+	if (test__start_subtest("kernel"))
+		test_kprobe_multi_bench_attach_addr(true);
+	if (test__start_subtest("modules"))
+		test_kprobe_multi_bench_attach_addr(false);
 }
 
 void test_kprobe_multi_test(void)
@@ -538,4 +760,8 @@ void test_kprobe_multi_test(void)
 		test_attach_api_fails();
 	if (test__start_subtest("attach_override"))
 		test_attach_override();
+	if (test__start_subtest("session"))
+		test_session_skel_api();
+	if (test__start_subtest("session_cookie"))
+		test_session_cookie_skel_api();
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/ksyms.c b/tools/testing/selftests/bpf/prog_tests/ksyms.c
index b295969b263b..dc7aab532fb1 100644
--- a/tools/testing/selftests/bpf/prog_tests/ksyms.c
+++ b/tools/testing/selftests/bpf/prog_tests/ksyms.c
@@ -5,8 +5,6 @@
 #include "test_ksyms.skel.h"
 #include <sys/stat.h>
 
-static int duration;
-
 void test_ksyms(void)
 {
 	const char *btf_path = "/sys/kernel/btf/vmlinux";
@@ -18,43 +16,37 @@ void test_ksyms(void)
 	int err;
 
 	err = kallsyms_find("bpf_link_fops", &link_fops_addr);
-	if (CHECK(err == -EINVAL, "kallsyms_fopen", "failed to open: %d\n", errno))
+	if (!ASSERT_NEQ(err, -EINVAL, "bpf_link_fops: kallsyms_fopen"))
 		return;
-	if (CHECK(err == -ENOENT, "ksym_find", "symbol 'bpf_link_fops' not found\n"))
+	if (!ASSERT_NEQ(err, -ENOENT, "bpf_link_fops: ksym_find"))
 		return;
 
 	err = kallsyms_find("__per_cpu_start", &per_cpu_start_addr);
-	if (CHECK(err == -EINVAL, "kallsyms_fopen", "failed to open: %d\n", errno))
+	if (!ASSERT_NEQ(err, -EINVAL, "__per_cpu_start: kallsyms_fopen"))
 		return;
-	if (CHECK(err == -ENOENT, "ksym_find", "symbol 'per_cpu_start' not found\n"))
+	if (!ASSERT_NEQ(err, -ENOENT, "__per_cpu_start: ksym_find"))
 		return;
 
-	if (CHECK(stat(btf_path, &st), "stat_btf", "err %d\n", errno))
+	if (!ASSERT_OK(stat(btf_path, &st), "stat_btf"))
 		return;
 	btf_size = st.st_size;
 
 	skel = test_ksyms__open_and_load();
-	if (CHECK(!skel, "skel_open", "failed to open and load skeleton\n"))
+	if (!ASSERT_OK_PTR(skel, "test_ksyms__open_and_load"))
 		return;
 
 	err = test_ksyms__attach(skel);
-	if (CHECK(err, "skel_attach", "skeleton attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "test_ksyms__attach"))
 		goto cleanup;
 
 	/* trigger tracepoint */
 	usleep(1);
 
 	data = skel->data;
-	CHECK(data->out__bpf_link_fops != link_fops_addr, "bpf_link_fops",
-	      "got 0x%llx, exp 0x%llx\n",
-	      data->out__bpf_link_fops, link_fops_addr);
-	CHECK(data->out__bpf_link_fops1 != 0, "bpf_link_fops1",
-	      "got %llu, exp %llu\n", data->out__bpf_link_fops1, (__u64)0);
-	CHECK(data->out__btf_size != btf_size, "btf_size",
-	      "got %llu, exp %llu\n", data->out__btf_size, btf_size);
-	CHECK(data->out__per_cpu_start != per_cpu_start_addr, "__per_cpu_start",
-	      "got %llu, exp %llu\n", data->out__per_cpu_start,
-	      per_cpu_start_addr);
+	ASSERT_EQ(data->out__bpf_link_fops, link_fops_addr, "bpf_link_fops");
+	ASSERT_EQ(data->out__bpf_link_fops1, 0, "bpf_link_fops1");
+	ASSERT_EQ(data->out__btf_size, btf_size, "btf_size");
+	ASSERT_EQ(data->out__per_cpu_start, per_cpu_start_addr, "__per_cpu_start");
 
 cleanup:
 	test_ksyms__destroy(skel);
diff --git a/tools/testing/selftests/bpf/prog_tests/module_attach.c b/tools/testing/selftests/bpf/prog_tests/module_attach.c
index f53d658ed080..6d391d95f96e 100644
--- a/tools/testing/selftests/bpf/prog_tests/module_attach.c
+++ b/tools/testing/selftests/bpf/prog_tests/module_attach.c
@@ -51,6 +51,10 @@ void test_module_attach(void)
 					     0, "bpf_testmod_test_read");
 	ASSERT_OK(err, "set_attach_target");
 
+	err = bpf_program__set_attach_target(skel->progs.handle_fentry_explicit_manual,
+					     0, "bpf_testmod:bpf_testmod_test_read");
+	ASSERT_OK(err, "set_attach_target_explicit");
+
 	err = test_module_attach__load(skel);
 	if (CHECK(err, "skel_load", "failed to load skeleton\n"))
 		return;
@@ -70,6 +74,8 @@ void test_module_attach(void)
 	ASSERT_EQ(bss->tp_btf_read_sz, READ_SZ, "tp_btf");
 	ASSERT_EQ(bss->fentry_read_sz, READ_SZ, "fentry");
 	ASSERT_EQ(bss->fentry_manual_read_sz, READ_SZ, "fentry_manual");
+	ASSERT_EQ(bss->fentry_explicit_read_sz, READ_SZ, "fentry_explicit");
+	ASSERT_EQ(bss->fentry_explicit_manual_read_sz, READ_SZ, "fentry_explicit_manual");
 	ASSERT_EQ(bss->fexit_read_sz, READ_SZ, "fexit");
 	ASSERT_EQ(bss->fexit_ret, -EIO, "fexit_tet");
 	ASSERT_EQ(bss->fmod_ret_read_sz, READ_SZ, "fmod_ret");
diff --git a/tools/testing/selftests/bpf/prog_tests/mptcp.c b/tools/testing/selftests/bpf/prog_tests/mptcp.c
index 8f8d792307c1..274d2e033e39 100644
--- a/tools/testing/selftests/bpf/prog_tests/mptcp.c
+++ b/tools/testing/selftests/bpf/prog_tests/mptcp.c
@@ -82,6 +82,22 @@ static void cleanup_netns(struct nstoken *nstoken)
 	SYS_NOFAIL("ip netns del %s", NS_TEST);
 }
 
+static int start_mptcp_server(int family, const char *addr_str, __u16 port,
+			      int timeout_ms)
+{
+	struct network_helper_opts opts = {
+		.timeout_ms	= timeout_ms,
+		.proto		= IPPROTO_MPTCP,
+	};
+	struct sockaddr_storage addr;
+	socklen_t addrlen;
+
+	if (make_sockaddr(family, addr_str, port, &addr, &addrlen))
+		return -1;
+
+	return start_server_addr(SOCK_STREAM, &addr, addrlen, &opts);
+}
+
 static int verify_tsk(int map_fd, int client_fd)
 {
 	int err, cfd = client_fd;
@@ -273,6 +289,8 @@ static int run_mptcpify(int cgroup_fd)
 	if (!ASSERT_OK_PTR(mptcpify_skel, "skel_open_load"))
 		return libbpf_get_error(mptcpify_skel);
 
+	mptcpify_skel->bss->pid = getpid();
+
 	err = mptcpify__attach(mptcpify_skel);
 	if (!ASSERT_OK(err, "skel_attach"))
 		goto out;
diff --git a/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c b/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c
index 24d493482ffc..e72d75d6baa7 100644
--- a/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c
+++ b/tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c
@@ -12,77 +12,229 @@
 #include <sys/wait.h>
 #include <sys/mount.h>
 #include <sys/fcntl.h>
+#include "network_helpers.h"
 
 #define STACK_SIZE (1024 * 1024)
 static char child_stack[STACK_SIZE];
 
-static int test_current_pid_tgid(void *args)
+static int get_pid_tgid(pid_t *pid, pid_t *tgid,
+			struct test_ns_current_pid_tgid__bss *bss)
 {
-	struct test_ns_current_pid_tgid__bss  *bss;
-	struct test_ns_current_pid_tgid *skel;
-	int err = -1, duration = 0;
-	pid_t tgid, pid;
 	struct stat st;
+	int err;
 
-	skel = test_ns_current_pid_tgid__open_and_load();
-	if (CHECK(!skel, "skel_open_load", "failed to load skeleton\n"))
-		goto cleanup;
-
-	pid = syscall(SYS_gettid);
-	tgid = getpid();
+	*pid = syscall(SYS_gettid);
+	*tgid = getpid();
 
 	err = stat("/proc/self/ns/pid", &st);
-	if (CHECK(err, "stat", "failed /proc/self/ns/pid: %d\n", err))
-		goto cleanup;
+	if (!ASSERT_OK(err, "stat /proc/self/ns/pid"))
+		return err;
 
-	bss = skel->bss;
 	bss->dev = st.st_dev;
 	bss->ino = st.st_ino;
 	bss->user_pid = 0;
 	bss->user_tgid = 0;
+	return 0;
+}
+
+static int test_current_pid_tgid_tp(void *args)
+{
+	struct test_ns_current_pid_tgid__bss  *bss;
+	struct test_ns_current_pid_tgid *skel;
+	int ret = -1, err;
+	pid_t tgid, pid;
+
+	skel = test_ns_current_pid_tgid__open();
+	if (!ASSERT_OK_PTR(skel, "test_ns_current_pid_tgid__open"))
+		return ret;
+
+	bpf_program__set_autoload(skel->progs.tp_handler, true);
+
+	err = test_ns_current_pid_tgid__load(skel);
+	if (!ASSERT_OK(err, "test_ns_current_pid_tgid__load"))
+		goto cleanup;
+
+	bss = skel->bss;
+	if (get_pid_tgid(&pid, &tgid, bss))
+		goto cleanup;
 
 	err = test_ns_current_pid_tgid__attach(skel);
-	if (CHECK(err, "skel_attach", "skeleton attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "test_ns_current_pid_tgid__attach"))
 		goto cleanup;
 
 	/* trigger tracepoint */
 	usleep(1);
-	ASSERT_EQ(bss->user_pid, pid, "pid");
-	ASSERT_EQ(bss->user_tgid, tgid, "tgid");
-	err = 0;
+	if (!ASSERT_EQ(bss->user_pid, pid, "pid"))
+		goto cleanup;
+	if (!ASSERT_EQ(bss->user_tgid, tgid, "tgid"))
+		goto cleanup;
+	ret = 0;
+
+cleanup:
+	test_ns_current_pid_tgid__destroy(skel);
+	return ret;
+}
+
+static int test_current_pid_tgid_cgrp(void *args)
+{
+	struct test_ns_current_pid_tgid__bss *bss;
+	struct test_ns_current_pid_tgid *skel;
+	int server_fd = -1, ret = -1, err;
+	int cgroup_fd = *(int *)args;
+	pid_t tgid, pid;
+
+	skel = test_ns_current_pid_tgid__open();
+	if (!ASSERT_OK_PTR(skel, "test_ns_current_pid_tgid__open"))
+		return ret;
+
+	bpf_program__set_autoload(skel->progs.cgroup_bind4, true);
+
+	err = test_ns_current_pid_tgid__load(skel);
+	if (!ASSERT_OK(err, "test_ns_current_pid_tgid__load"))
+		goto cleanup;
+
+	bss = skel->bss;
+	if (get_pid_tgid(&pid, &tgid, bss))
+		goto cleanup;
+
+	skel->links.cgroup_bind4 = bpf_program__attach_cgroup(
+		skel->progs.cgroup_bind4, cgroup_fd);
+	if (!ASSERT_OK_PTR(skel->links.cgroup_bind4, "bpf_program__attach_cgroup"))
+		goto cleanup;
+
+	server_fd = start_server(AF_INET, SOCK_STREAM, NULL, 0, 0);
+	if (!ASSERT_GE(server_fd, 0, "start_server"))
+		goto cleanup;
+
+	if (!ASSERT_EQ(bss->user_pid, pid, "pid"))
+		goto cleanup;
+	if (!ASSERT_EQ(bss->user_tgid, tgid, "tgid"))
+		goto cleanup;
+	ret = 0;
 
 cleanup:
-	 test_ns_current_pid_tgid__destroy(skel);
+	if (server_fd >= 0)
+		close(server_fd);
+	test_ns_current_pid_tgid__destroy(skel);
+	return ret;
+}
+
+static int test_current_pid_tgid_sk_msg(void *args)
+{
+	int verdict, map, server_fd = -1, client_fd = -1;
+	struct test_ns_current_pid_tgid__bss *bss;
+	static const char send_msg[] = "message";
+	struct test_ns_current_pid_tgid *skel;
+	int ret = -1, err, key = 0;
+	pid_t tgid, pid;
+
+	skel = test_ns_current_pid_tgid__open();
+	if (!ASSERT_OK_PTR(skel, "test_ns_current_pid_tgid__open"))
+		return ret;
+
+	bpf_program__set_autoload(skel->progs.sk_msg, true);
+
+	err = test_ns_current_pid_tgid__load(skel);
+	if (!ASSERT_OK(err, "test_ns_current_pid_tgid__load"))
+		goto cleanup;
+
+	bss = skel->bss;
+	if (get_pid_tgid(&pid, &tgid, skel->bss))
+		goto cleanup;
+
+	verdict = bpf_program__fd(skel->progs.sk_msg);
+	map = bpf_map__fd(skel->maps.sock_map);
+	err = bpf_prog_attach(verdict, map, BPF_SK_MSG_VERDICT, 0);
+	if (!ASSERT_OK(err, "prog_attach"))
+		goto cleanup;
+
+	server_fd = start_server(AF_INET6, SOCK_STREAM, "::1", 0, 0);
+	if (!ASSERT_GE(server_fd, 0, "start_server"))
+		goto cleanup;
 
-	return err;
+	client_fd = connect_to_fd(server_fd, 0);
+	if (!ASSERT_GE(client_fd, 0, "connect_to_fd"))
+		goto cleanup;
+
+	err = bpf_map_update_elem(map, &key, &client_fd, BPF_ANY);
+	if (!ASSERT_OK(err, "bpf_map_update_elem"))
+		goto cleanup;
+
+	err = send(client_fd, send_msg, sizeof(send_msg), 0);
+	if (!ASSERT_EQ(err, sizeof(send_msg), "send(msg)"))
+		goto cleanup;
+
+	if (!ASSERT_EQ(bss->user_pid, pid, "pid"))
+		goto cleanup;
+	if (!ASSERT_EQ(bss->user_tgid, tgid, "tgid"))
+		goto cleanup;
+	ret = 0;
+
+cleanup:
+	if (server_fd >= 0)
+		close(server_fd);
+	if (client_fd >= 0)
+		close(client_fd);
+	test_ns_current_pid_tgid__destroy(skel);
+	return ret;
 }
 
-static void test_ns_current_pid_tgid_new_ns(void)
+static void test_ns_current_pid_tgid_new_ns(int (*fn)(void *), void *arg)
 {
-	int wstatus, duration = 0;
+	int wstatus;
 	pid_t cpid;
 
 	/* Create a process in a new namespace, this process
 	 * will be the init process of this new namespace hence will be pid 1.
 	 */
-	cpid = clone(test_current_pid_tgid, child_stack + STACK_SIZE,
-		     CLONE_NEWPID | SIGCHLD, NULL);
+	cpid = clone(fn, child_stack + STACK_SIZE,
+		     CLONE_NEWPID | SIGCHLD, arg);
 
-	if (CHECK(cpid == -1, "clone", "%s\n", strerror(errno)))
+	if (!ASSERT_NEQ(cpid, -1, "clone"))
 		return;
 
-	if (CHECK(waitpid(cpid, &wstatus, 0) == -1, "waitpid", "%s\n", strerror(errno)))
+	if (!ASSERT_NEQ(waitpid(cpid, &wstatus, 0), -1, "waitpid"))
 		return;
 
-	if (CHECK(WEXITSTATUS(wstatus) != 0, "newns_pidtgid", "failed"))
+	if (!ASSERT_OK(WEXITSTATUS(wstatus), "newns_pidtgid"))
 		return;
 }
 
+static void test_in_netns(int (*fn)(void *), void *arg)
+{
+	struct nstoken *nstoken = NULL;
+
+	SYS(cleanup, "ip netns add ns_current_pid_tgid");
+	SYS(cleanup, "ip -net ns_current_pid_tgid link set dev lo up");
+
+	nstoken = open_netns("ns_current_pid_tgid");
+	if (!ASSERT_OK_PTR(nstoken, "open_netns"))
+		goto cleanup;
+
+	test_ns_current_pid_tgid_new_ns(fn, arg);
+
+cleanup:
+	if (nstoken)
+		close_netns(nstoken);
+	SYS_NOFAIL("ip netns del ns_current_pid_tgid");
+}
+
 /* TODO: use a different tracepoint */
 void serial_test_ns_current_pid_tgid(void)
 {
-	if (test__start_subtest("ns_current_pid_tgid_root_ns"))
-		test_current_pid_tgid(NULL);
-	if (test__start_subtest("ns_current_pid_tgid_new_ns"))
-		test_ns_current_pid_tgid_new_ns();
+	if (test__start_subtest("root_ns_tp"))
+		test_current_pid_tgid_tp(NULL);
+	if (test__start_subtest("new_ns_tp"))
+		test_ns_current_pid_tgid_new_ns(test_current_pid_tgid_tp, NULL);
+	if (test__start_subtest("new_ns_cgrp")) {
+		int cgroup_fd = -1;
+
+		cgroup_fd = test__join_cgroup("/sock_addr");
+		if (ASSERT_GE(cgroup_fd, 0, "join_cgroup")) {
+			test_in_netns(test_current_pid_tgid_cgrp, &cgroup_fd);
+			close(cgroup_fd);
+		}
+	}
+	if (test__start_subtest("new_ns_sk_msg"))
+		test_in_netns(test_current_pid_tgid_sk_msg, NULL);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/preempt_lock.c b/tools/testing/selftests/bpf/prog_tests/preempt_lock.c
new file mode 100644
index 000000000000..02917c672441
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/preempt_lock.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include <network_helpers.h>
+#include <preempt_lock.skel.h>
+
+void test_preempt_lock(void)
+{
+	RUN_TESTS(preempt_lock);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/ringbuf.c b/tools/testing/selftests/bpf/prog_tests/ringbuf.c
index 48c5695b7abf..4c6f42dae409 100644
--- a/tools/testing/selftests/bpf/prog_tests/ringbuf.c
+++ b/tools/testing/selftests/bpf/prog_tests/ringbuf.c
@@ -13,6 +13,7 @@
 #include <linux/perf_event.h>
 #include <linux/ring_buffer.h>
 #include "test_ringbuf.lskel.h"
+#include "test_ringbuf_n.lskel.h"
 #include "test_ringbuf_map_key.lskel.h"
 
 #define EDONE 7777
@@ -326,6 +327,68 @@ cleanup:
 	test_ringbuf_lskel__destroy(skel);
 }
 
+/*
+ * Test ring_buffer__consume_n() by producing N_TOT_SAMPLES samples in the ring
+ * buffer, via getpid(), and consuming them in chunks of N_SAMPLES.
+ */
+#define N_TOT_SAMPLES	32
+#define N_SAMPLES	4
+
+/* Sample value to verify the callback validity */
+#define SAMPLE_VALUE	42L
+
+static int process_n_sample(void *ctx, void *data, size_t len)
+{
+	struct sample *s = data;
+
+	ASSERT_EQ(s->value, SAMPLE_VALUE, "sample_value");
+
+	return 0;
+}
+
+static void ringbuf_n_subtest(void)
+{
+	struct test_ringbuf_n_lskel *skel_n;
+	int err, i;
+
+	skel_n = test_ringbuf_n_lskel__open();
+	if (!ASSERT_OK_PTR(skel_n, "test_ringbuf_n_lskel__open"))
+		return;
+
+	skel_n->maps.ringbuf.max_entries = getpagesize();
+	skel_n->bss->pid = getpid();
+
+	err = test_ringbuf_n_lskel__load(skel_n);
+	if (!ASSERT_OK(err, "test_ringbuf_n_lskel__load"))
+		goto cleanup;
+
+	ringbuf = ring_buffer__new(skel_n->maps.ringbuf.map_fd,
+				   process_n_sample, NULL, NULL);
+	if (!ASSERT_OK_PTR(ringbuf, "ring_buffer__new"))
+		goto cleanup;
+
+	err = test_ringbuf_n_lskel__attach(skel_n);
+	if (!ASSERT_OK(err, "test_ringbuf_n_lskel__attach"))
+		goto cleanup_ringbuf;
+
+	/* Produce N_TOT_SAMPLES samples in the ring buffer by calling getpid() */
+	skel_n->bss->value = SAMPLE_VALUE;
+	for (i = 0; i < N_TOT_SAMPLES; i++)
+		syscall(__NR_getpgid);
+
+	/* Consume all samples from the ring buffer in batches of N_SAMPLES */
+	for (i = 0; i < N_TOT_SAMPLES; i += err) {
+		err = ring_buffer__consume_n(ringbuf, N_SAMPLES);
+		if (!ASSERT_EQ(err, N_SAMPLES, "rb_consume"))
+			goto cleanup_ringbuf;
+	}
+
+cleanup_ringbuf:
+	ring_buffer__free(ringbuf);
+cleanup:
+	test_ringbuf_n_lskel__destroy(skel_n);
+}
+
 static int process_map_key_sample(void *ctx, void *data, size_t len)
 {
 	struct sample *s;
@@ -384,6 +447,8 @@ void test_ringbuf(void)
 {
 	if (test__start_subtest("ringbuf"))
 		ringbuf_subtest();
+	if (test__start_subtest("ringbuf_n"))
+		ringbuf_n_subtest();
 	if (test__start_subtest("ringbuf_map_key"))
 		ringbuf_map_key_subtest();
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c
index b15b343ebb6b..920aee41bd58 100644
--- a/tools/testing/selftests/bpf/prog_tests/send_signal.c
+++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c
@@ -179,7 +179,7 @@ static void test_send_signal_nmi(bool signal_thread)
 	pmu_fd = syscall(__NR_perf_event_open, &attr, 0 /* pid */,
 			 -1 /* cpu */, -1 /* group_fd */, 0 /* flags */);
 	if (pmu_fd == -1) {
-		if (errno == ENOENT) {
+		if (errno == ENOENT || errno == EOPNOTSUPP) {
 			printf("%s:SKIP:no PERF_COUNT_HW_CPU_CYCLES\n",
 			       __func__);
 			test__skip();
diff --git a/tools/testing/selftests/bpf/prog_tests/sk_assign.c b/tools/testing/selftests/bpf/prog_tests/sk_assign.c
index 1374b626a985..0b9bd1d6f7cc 100644
--- a/tools/testing/selftests/bpf/prog_tests/sk_assign.c
+++ b/tools/testing/selftests/bpf/prog_tests/sk_assign.c
@@ -15,6 +15,7 @@
 #include <unistd.h>
 
 #include "test_progs.h"
+#include "network_helpers.h"
 
 #define BIND_PORT 1234
 #define CONNECT_PORT 4321
@@ -22,8 +23,6 @@
 #define NS_SELF "/proc/self/ns/net"
 #define SERVER_MAP_PATH "/sys/fs/bpf/tc/globals/server_map"
 
-static const struct timeval timeo_sec = { .tv_sec = 3 };
-static const size_t timeo_optlen = sizeof(timeo_sec);
 static int stop, duration;
 
 static bool
@@ -73,52 +72,6 @@ configure_stack(void)
 	return true;
 }
 
-static int
-start_server(const struct sockaddr *addr, socklen_t len, int type)
-{
-	int fd;
-
-	fd = socket(addr->sa_family, type, 0);
-	if (CHECK_FAIL(fd == -1))
-		goto out;
-	if (CHECK_FAIL(setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &timeo_sec,
-				  timeo_optlen)))
-		goto close_out;
-	if (CHECK_FAIL(bind(fd, addr, len) == -1))
-		goto close_out;
-	if (type == SOCK_STREAM && CHECK_FAIL(listen(fd, 128) == -1))
-		goto close_out;
-
-	goto out;
-close_out:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
-
-static int
-connect_to_server(const struct sockaddr *addr, socklen_t len, int type)
-{
-	int fd = -1;
-
-	fd = socket(addr->sa_family, type, 0);
-	if (CHECK_FAIL(fd == -1))
-		goto out;
-	if (CHECK_FAIL(setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &timeo_sec,
-				  timeo_optlen)))
-		goto close_out;
-	if (CHECK_FAIL(connect(fd, addr, len)))
-		goto close_out;
-
-	goto out;
-close_out:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
-
 static in_port_t
 get_port(int fd)
 {
@@ -161,7 +114,7 @@ run_test(int server_fd, const struct sockaddr *addr, socklen_t len, int type)
 	in_port_t port;
 	int ret = 1;
 
-	client = connect_to_server(addr, len, type);
+	client = connect_to_addr(type, (struct sockaddr_storage *)addr, len, NULL);
 	if (client == -1) {
 		perror("Cannot connect to server");
 		goto out;
@@ -310,7 +263,9 @@ void test_sk_assign(void)
 			continue;
 		prepare_addr(test->addr, test->family, BIND_PORT, false);
 		addr = (const struct sockaddr *)test->addr;
-		server = start_server(addr, test->len, test->type);
+		server = start_server_addr(test->type,
+					   (const struct sockaddr_storage *)addr,
+					   test->len, NULL);
 		if (server == -1)
 			goto close;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/sock_addr.c b/tools/testing/selftests/bpf/prog_tests/sock_addr.c
index 5fd617718991..b880c564a204 100644
--- a/tools/testing/selftests/bpf/prog_tests/sock_addr.c
+++ b/tools/testing/selftests/bpf/prog_tests/sock_addr.c
@@ -3,16 +3,56 @@
 
 #include "test_progs.h"
 
+#include "sock_addr_kern.skel.h"
+#include "bind4_prog.skel.h"
+#include "bind6_prog.skel.h"
 #include "connect_unix_prog.skel.h"
+#include "connect4_prog.skel.h"
+#include "connect6_prog.skel.h"
+#include "sendmsg4_prog.skel.h"
+#include "sendmsg6_prog.skel.h"
+#include "recvmsg4_prog.skel.h"
+#include "recvmsg6_prog.skel.h"
 #include "sendmsg_unix_prog.skel.h"
 #include "recvmsg_unix_prog.skel.h"
+#include "getsockname4_prog.skel.h"
+#include "getsockname6_prog.skel.h"
 #include "getsockname_unix_prog.skel.h"
+#include "getpeername4_prog.skel.h"
+#include "getpeername6_prog.skel.h"
 #include "getpeername_unix_prog.skel.h"
 #include "network_helpers.h"
 
+#ifndef ENOTSUPP
+# define ENOTSUPP 524
+#endif
+
+#define TEST_NS                 "sock_addr"
+#define TEST_IF_PREFIX          "test_sock_addr"
+#define TEST_IPV4               "127.0.0.4"
+#define TEST_IPV6               "::6"
+
+#define SERV4_IP                "192.168.1.254"
+#define SERV4_REWRITE_IP        "127.0.0.1"
+#define SRC4_IP                 "172.16.0.1"
+#define SRC4_REWRITE_IP         TEST_IPV4
+#define SERV4_PORT              4040
+#define SERV4_REWRITE_PORT      4444
+
+#define SERV6_IP                "face:b00c:1234:5678::abcd"
+#define SERV6_REWRITE_IP        "::1"
+#define SERV6_V4MAPPED_IP       "::ffff:192.168.0.4"
+#define SRC6_IP                 "::1"
+#define SRC6_REWRITE_IP         TEST_IPV6
+#define WILDCARD6_IP            "::"
+#define SERV6_PORT              6060
+#define SERV6_REWRITE_PORT      6666
+
 #define SERVUN_ADDRESS         "bpf_cgroup_unix_test"
 #define SERVUN_REWRITE_ADDRESS "bpf_cgroup_unix_test_rewrite"
-#define SRCUN_ADDRESS	       "bpf_cgroup_unix_test_src"
+#define SRCUN_ADDRESS          "bpf_cgroup_unix_test_src"
+
+#define save_errno_do(op) ({ int __save = errno; op; errno = __save; })
 
 enum sock_addr_test_type {
 	SOCK_ADDR_TEST_BIND,
@@ -23,152 +63,955 @@ enum sock_addr_test_type {
 	SOCK_ADDR_TEST_GETPEERNAME,
 };
 
-typedef void *(*load_fn)(int cgroup_fd);
+typedef void *(*load_fn)(int cgroup_fd,
+			 enum bpf_attach_type attach_type,
+			 bool expect_reject);
 typedef void (*destroy_fn)(void *skel);
 
-struct sock_addr_test {
-	enum sock_addr_test_type type;
-	const char *name;
-	/* BPF prog properties */
-	load_fn loadfn;
-	destroy_fn destroyfn;
-	/* Socket properties */
-	int socket_family;
-	int socket_type;
-	/* IP:port pairs for BPF prog to override */
-	const char *requested_addr;
-	unsigned short requested_port;
-	const char *expected_addr;
-	unsigned short expected_port;
-	const char *expected_src_addr;
+static int cmp_addr(const struct sockaddr_storage *addr1, socklen_t addr1_len,
+		    const struct sockaddr_storage *addr2, socklen_t addr2_len,
+		    bool cmp_port);
+
+struct init_sock_args {
+	int af;
+	int type;
 };
 
-static void *connect_unix_prog_load(int cgroup_fd)
-{
-	struct connect_unix_prog *skel;
+struct addr_args {
+	char addr[sizeof(struct sockaddr_storage)];
+	int addrlen;
+};
 
-	skel = connect_unix_prog__open_and_load();
-	if (!ASSERT_OK_PTR(skel, "skel_open"))
-		goto cleanup;
+struct sendmsg_args {
+	struct addr_args addr;
+	char msg[10];
+	int msglen;
+};
 
-	skel->links.connect_unix_prog = bpf_program__attach_cgroup(
-		skel->progs.connect_unix_prog, cgroup_fd);
-	if (!ASSERT_OK_PTR(skel->links.connect_unix_prog, "prog_attach"))
-		goto cleanup;
+static struct sock_addr_kern *skel;
 
-	return skel;
-cleanup:
-	connect_unix_prog__destroy(skel);
-	return NULL;
+static int run_bpf_prog(const char *prog_name, void *ctx, int ctx_size)
+{
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+	struct bpf_program *prog;
+	int prog_fd, err;
+
+	topts.ctx_in = ctx;
+	topts.ctx_size_in = ctx_size;
+
+	prog = bpf_object__find_program_by_name(skel->obj, prog_name);
+	if (!ASSERT_OK_PTR(prog, "bpf_object__find_program_by_name"))
+		goto err;
+
+	prog_fd = bpf_program__fd(prog);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	if (!ASSERT_OK(err, prog_name))
+		goto err;
+
+	err = topts.retval;
+	errno = -topts.retval;
+	goto out;
+err:
+	err = -1;
+out:
+	return err;
 }
 
-static void connect_unix_prog_destroy(void *skel)
+static int kernel_init_sock(int af, int type, int protocol)
 {
-	connect_unix_prog__destroy(skel);
+	struct init_sock_args args = {
+		.af = af,
+		.type = type,
+	};
+
+	return run_bpf_prog("init_sock", &args, sizeof(args));
 }
 
-static void *sendmsg_unix_prog_load(int cgroup_fd)
+static int kernel_close_sock(int fd)
 {
-	struct sendmsg_unix_prog *skel;
+	return run_bpf_prog("close_sock", NULL, 0);
+}
 
-	skel = sendmsg_unix_prog__open_and_load();
-	if (!ASSERT_OK_PTR(skel, "skel_open"))
-		goto cleanup;
+static int sock_addr_op(const char *name, struct sockaddr *addr,
+			socklen_t *addrlen, bool expect_change)
+{
+	struct addr_args args;
+	int err;
 
-	skel->links.sendmsg_unix_prog = bpf_program__attach_cgroup(
-		skel->progs.sendmsg_unix_prog, cgroup_fd);
-	if (!ASSERT_OK_PTR(skel->links.sendmsg_unix_prog, "prog_attach"))
-		goto cleanup;
+	if (addrlen)
+		args.addrlen = *addrlen;
 
-	return skel;
-cleanup:
-	sendmsg_unix_prog__destroy(skel);
-	return NULL;
+	if (addr)
+		memcpy(&args.addr, addr, *addrlen);
+
+	err = run_bpf_prog(name, &args, sizeof(args));
+
+	if (!expect_change && addr)
+		if (!ASSERT_EQ(cmp_addr((struct sockaddr_storage *)addr,
+					*addrlen,
+					(struct sockaddr_storage *)&args.addr,
+					args.addrlen, 1),
+			       0, "address_param_modified"))
+			return -1;
+
+	if (addrlen)
+		*addrlen = args.addrlen;
+
+	if (addr)
+		memcpy(addr, &args.addr, *addrlen);
+
+	return err;
 }
 
-static void sendmsg_unix_prog_destroy(void *skel)
+static int send_msg_op(const char *name, struct sockaddr *addr,
+		       socklen_t addrlen, const char *msg, int msglen)
 {
-	sendmsg_unix_prog__destroy(skel);
+	struct sendmsg_args args;
+	int err;
+
+	memset(&args, 0, sizeof(args));
+	memcpy(&args.addr.addr, addr, addrlen);
+	args.addr.addrlen = addrlen;
+	memcpy(args.msg, msg, msglen);
+	args.msglen = msglen;
+
+	err = run_bpf_prog(name, &args, sizeof(args));
+
+	if (!ASSERT_EQ(cmp_addr((struct sockaddr_storage *)addr,
+				addrlen,
+				(struct sockaddr_storage *)&args.addr.addr,
+				args.addr.addrlen, 1),
+		       0, "address_param_modified"))
+		return -1;
+
+	return err;
 }
 
-static void *recvmsg_unix_prog_load(int cgroup_fd)
+static int kernel_connect(struct sockaddr *addr, socklen_t addrlen)
 {
-	struct recvmsg_unix_prog *skel;
-
-	skel = recvmsg_unix_prog__open_and_load();
-	if (!ASSERT_OK_PTR(skel, "skel_open"))
-		goto cleanup;
+	return sock_addr_op("kernel_connect", addr, &addrlen, false);
+}
 
-	skel->links.recvmsg_unix_prog = bpf_program__attach_cgroup(
-		skel->progs.recvmsg_unix_prog, cgroup_fd);
-	if (!ASSERT_OK_PTR(skel->links.recvmsg_unix_prog, "prog_attach"))
-		goto cleanup;
+static int kernel_bind(int fd, struct sockaddr *addr, socklen_t addrlen)
+{
+	return sock_addr_op("kernel_bind", addr, &addrlen, false);
+}
 
-	return skel;
-cleanup:
-	recvmsg_unix_prog__destroy(skel);
-	return NULL;
+static int kernel_listen(void)
+{
+	return sock_addr_op("kernel_listen", NULL, NULL, false);
 }
 
-static void recvmsg_unix_prog_destroy(void *skel)
+static int kernel_sendmsg(int fd, struct sockaddr *addr, socklen_t addrlen,
+			  char *msg, int msglen)
 {
-	recvmsg_unix_prog__destroy(skel);
+	return send_msg_op("kernel_sendmsg", addr, addrlen, msg, msglen);
 }
 
-static void *getsockname_unix_prog_load(int cgroup_fd)
+static int sock_sendmsg(int fd, struct sockaddr *addr, socklen_t addrlen,
+			char *msg, int msglen)
 {
-	struct getsockname_unix_prog *skel;
+	return send_msg_op("sock_sendmsg", addr, addrlen, msg, msglen);
+}
 
-	skel = getsockname_unix_prog__open_and_load();
-	if (!ASSERT_OK_PTR(skel, "skel_open"))
-		goto cleanup;
+static int kernel_getsockname(int fd, struct sockaddr *addr, socklen_t *addrlen)
+{
+	return sock_addr_op("kernel_getsockname", addr, addrlen, true);
+}
 
-	skel->links.getsockname_unix_prog = bpf_program__attach_cgroup(
-		skel->progs.getsockname_unix_prog, cgroup_fd);
-	if (!ASSERT_OK_PTR(skel->links.getsockname_unix_prog, "prog_attach"))
-		goto cleanup;
+static int kernel_getpeername(int fd, struct sockaddr *addr, socklen_t *addrlen)
+{
+	return sock_addr_op("kernel_getpeername", addr, addrlen, true);
+}
 
-	return skel;
-cleanup:
-	getsockname_unix_prog__destroy(skel);
-	return NULL;
+int kernel_connect_to_addr(int type, const struct sockaddr_storage *addr, socklen_t addrlen,
+			   const struct network_helper_opts *opts)
+{
+	int err;
+
+	if (!ASSERT_OK(kernel_init_sock(addr->ss_family, type, 0),
+		       "kernel_init_sock"))
+		goto err;
+
+	if (kernel_connect((struct sockaddr *)addr, addrlen) < 0)
+		goto err;
+
+	/* Test code expects a "file descriptor" on success. */
+	err = 1;
+	goto out;
+err:
+	err = -1;
+	save_errno_do(ASSERT_OK(kernel_close_sock(0), "kernel_close_sock"));
+out:
+	return err;
 }
 
-static void getsockname_unix_prog_destroy(void *skel)
+int kernel_start_server(int family, int type, const char *addr_str, __u16 port,
+			int timeout_ms)
 {
-	getsockname_unix_prog__destroy(skel);
+	struct sockaddr_storage addr;
+	socklen_t addrlen;
+	int err;
+
+	if (!ASSERT_OK(kernel_init_sock(family, type, 0), "kernel_init_sock"))
+		goto err;
+
+	if (make_sockaddr(family, addr_str, port, &addr, &addrlen))
+		goto err;
+
+	if (kernel_bind(0, (struct sockaddr *)&addr, addrlen) < 0)
+		goto err;
+
+	if (type == SOCK_STREAM) {
+		if (!ASSERT_OK(kernel_listen(), "kernel_listen"))
+			goto err;
+	}
+
+	/* Test code expects a "file descriptor" on success. */
+	err = 1;
+	goto out;
+err:
+	err = -1;
+	save_errno_do(ASSERT_OK(kernel_close_sock(0), "kernel_close_sock"));
+out:
+	return err;
 }
 
-static void *getpeername_unix_prog_load(int cgroup_fd)
+struct sock_ops {
+	int (*connect_to_addr)(int type, const struct sockaddr_storage *addr,
+			       socklen_t addrlen,
+			       const struct network_helper_opts *opts);
+	int (*start_server)(int family, int type, const char *addr_str,
+			    __u16 port, int timeout_ms);
+	int (*socket)(int famil, int type, int protocol);
+	int (*bind)(int fd, struct sockaddr *addr, socklen_t addrlen);
+	int (*getsockname)(int fd, struct sockaddr *addr, socklen_t *addrlen);
+	int (*getpeername)(int fd, struct sockaddr *addr, socklen_t *addrlen);
+	int (*sendmsg)(int fd, struct sockaddr *addr, socklen_t addrlen,
+		       char *msg, int msglen);
+	int (*close)(int fd);
+};
+
+static int user_sendmsg(int fd, struct sockaddr *addr, socklen_t addrlen,
+			char *msg, int msglen)
 {
-	struct getpeername_unix_prog *skel;
+	struct msghdr hdr;
+	struct iovec iov;
 
-	skel = getpeername_unix_prog__open_and_load();
-	if (!ASSERT_OK_PTR(skel, "skel_open"))
-		goto cleanup;
+	memset(&iov, 0, sizeof(iov));
+	iov.iov_base = msg;
+	iov.iov_len = msglen;
 
-	skel->links.getpeername_unix_prog = bpf_program__attach_cgroup(
-		skel->progs.getpeername_unix_prog, cgroup_fd);
-	if (!ASSERT_OK_PTR(skel->links.getpeername_unix_prog, "prog_attach"))
-		goto cleanup;
+	memset(&hdr, 0, sizeof(hdr));
+	hdr.msg_name = (void *)addr;
+	hdr.msg_namelen = addrlen;
+	hdr.msg_iov = &iov;
+	hdr.msg_iovlen = 1;
 
-	return skel;
-cleanup:
-	getpeername_unix_prog__destroy(skel);
-	return NULL;
+	return sendmsg(fd, &hdr, 0);
 }
 
-static void getpeername_unix_prog_destroy(void *skel)
+static int user_bind(int fd, struct sockaddr *addr, socklen_t addrlen)
 {
-	getpeername_unix_prog__destroy(skel);
+	return bind(fd, (const struct sockaddr *)addr, addrlen);
+}
+
+struct sock_ops user_ops = {
+	.connect_to_addr = connect_to_addr,
+	.start_server = start_server,
+	.socket = socket,
+	.bind = user_bind,
+	.getsockname = getsockname,
+	.getpeername = getpeername,
+	.sendmsg = user_sendmsg,
+	.close = close,
+};
+
+struct sock_ops kern_ops_sock_sendmsg = {
+	.connect_to_addr = kernel_connect_to_addr,
+	.start_server = kernel_start_server,
+	.socket = kernel_init_sock,
+	.bind = kernel_bind,
+	.getsockname = kernel_getsockname,
+	.getpeername = kernel_getpeername,
+	.sendmsg = sock_sendmsg,
+	.close = kernel_close_sock,
+};
+
+struct sock_ops kern_ops_kernel_sendmsg = {
+	.connect_to_addr = kernel_connect_to_addr,
+	.start_server = kernel_start_server,
+	.socket = kernel_init_sock,
+	.bind = kernel_bind,
+	.getsockname = kernel_getsockname,
+	.getpeername = kernel_getpeername,
+	.sendmsg = kernel_sendmsg,
+	.close = kernel_close_sock,
+};
+
+struct sock_addr_test {
+	enum sock_addr_test_type type;
+	const char *name;
+	/* BPF prog properties */
+	load_fn loadfn;
+	destroy_fn destroyfn;
+	enum bpf_attach_type attach_type;
+	/* Socket operations */
+	struct sock_ops *ops;
+	/* Socket properties */
+	int socket_family;
+	int socket_type;
+	/* IP:port pairs for BPF prog to override */
+	const char *requested_addr;
+	unsigned short requested_port;
+	const char *expected_addr;
+	unsigned short expected_port;
+	const char *expected_src_addr;
+	/* Expected test result */
+	enum {
+		LOAD_REJECT,
+		ATTACH_REJECT,
+		SYSCALL_EPERM,
+		SYSCALL_ENOTSUPP,
+		SUCCESS,
+	} expected_result;
+};
+
+#define BPF_SKEL_FUNCS_RAW(skel_name, prog_name) \
+static void *prog_name##_load_raw(int cgroup_fd, \
+				  enum bpf_attach_type attach_type, \
+				  bool expect_reject) \
+{ \
+	struct skel_name *skel = skel_name##__open(); \
+	int prog_fd = -1; \
+	if (!ASSERT_OK_PTR(skel, "skel_open")) \
+		goto cleanup; \
+	if (!ASSERT_OK(skel_name##__load(skel), "load")) \
+		goto cleanup; \
+	prog_fd = bpf_program__fd(skel->progs.prog_name); \
+	if (!ASSERT_GT(prog_fd, 0, "prog_fd")) \
+		goto cleanup; \
+	if (bpf_prog_attach(prog_fd, cgroup_fd, attach_type, \
+			      BPF_F_ALLOW_OVERRIDE), "bpf_prog_attach") { \
+		ASSERT_TRUE(expect_reject, "unexpected rejection"); \
+		goto cleanup; \
+	} \
+	if (!ASSERT_FALSE(expect_reject, "expected rejection")) \
+		goto cleanup; \
+cleanup: \
+	if (prog_fd > 0) \
+		bpf_prog_detach(cgroup_fd, attach_type); \
+	skel_name##__destroy(skel); \
+	return NULL; \
+} \
+static void prog_name##_destroy_raw(void *progfd) \
+{ \
+	/* No-op. *_load_raw does all cleanup. */ \
+} \
+
+#define BPF_SKEL_FUNCS(skel_name, prog_name) \
+static void *prog_name##_load(int cgroup_fd, \
+			      enum bpf_attach_type attach_type, \
+			      bool expect_reject) \
+{ \
+	struct skel_name *skel = skel_name##__open(); \
+	if (!ASSERT_OK_PTR(skel, "skel_open")) \
+		goto cleanup; \
+	if (!ASSERT_OK(bpf_program__set_expected_attach_type(skel->progs.prog_name, \
+							     attach_type), \
+		       "set_expected_attach_type")) \
+		goto cleanup; \
+	if (skel_name##__load(skel)) { \
+		ASSERT_TRUE(expect_reject, "unexpected rejection"); \
+		goto cleanup; \
+	} \
+	if (!ASSERT_FALSE(expect_reject, "expected rejection")) \
+		goto cleanup; \
+	skel->links.prog_name = bpf_program__attach_cgroup( \
+		skel->progs.prog_name, cgroup_fd); \
+	if (!ASSERT_OK_PTR(skel->links.prog_name, "prog_attach")) \
+		goto cleanup; \
+	return skel; \
+cleanup: \
+	skel_name##__destroy(skel); \
+	return NULL; \
+} \
+static void prog_name##_destroy(void *skel) \
+{ \
+	skel_name##__destroy(skel); \
 }
 
+BPF_SKEL_FUNCS(bind4_prog, bind_v4_prog);
+BPF_SKEL_FUNCS_RAW(bind4_prog, bind_v4_prog);
+BPF_SKEL_FUNCS(bind4_prog, bind_v4_deny_prog);
+BPF_SKEL_FUNCS(bind6_prog, bind_v6_prog);
+BPF_SKEL_FUNCS_RAW(bind6_prog, bind_v6_prog);
+BPF_SKEL_FUNCS(bind6_prog, bind_v6_deny_prog);
+BPF_SKEL_FUNCS(connect4_prog, connect_v4_prog);
+BPF_SKEL_FUNCS_RAW(connect4_prog, connect_v4_prog);
+BPF_SKEL_FUNCS(connect4_prog, connect_v4_deny_prog);
+BPF_SKEL_FUNCS(connect6_prog, connect_v6_prog);
+BPF_SKEL_FUNCS_RAW(connect6_prog, connect_v6_prog);
+BPF_SKEL_FUNCS(connect6_prog, connect_v6_deny_prog);
+BPF_SKEL_FUNCS(connect_unix_prog, connect_unix_prog);
+BPF_SKEL_FUNCS_RAW(connect_unix_prog, connect_unix_prog);
+BPF_SKEL_FUNCS(connect_unix_prog, connect_unix_deny_prog);
+BPF_SKEL_FUNCS(sendmsg4_prog, sendmsg_v4_prog);
+BPF_SKEL_FUNCS_RAW(sendmsg4_prog, sendmsg_v4_prog);
+BPF_SKEL_FUNCS(sendmsg4_prog, sendmsg_v4_deny_prog);
+BPF_SKEL_FUNCS(sendmsg6_prog, sendmsg_v6_prog);
+BPF_SKEL_FUNCS_RAW(sendmsg6_prog, sendmsg_v6_prog);
+BPF_SKEL_FUNCS(sendmsg6_prog, sendmsg_v6_deny_prog);
+BPF_SKEL_FUNCS(sendmsg6_prog, sendmsg_v6_preserve_dst_prog);
+BPF_SKEL_FUNCS(sendmsg6_prog, sendmsg_v6_v4mapped_prog);
+BPF_SKEL_FUNCS(sendmsg6_prog, sendmsg_v6_wildcard_prog);
+BPF_SKEL_FUNCS(sendmsg_unix_prog, sendmsg_unix_prog);
+BPF_SKEL_FUNCS_RAW(sendmsg_unix_prog, sendmsg_unix_prog);
+BPF_SKEL_FUNCS(sendmsg_unix_prog, sendmsg_unix_deny_prog);
+BPF_SKEL_FUNCS(recvmsg4_prog, recvmsg4_prog);
+BPF_SKEL_FUNCS_RAW(recvmsg4_prog, recvmsg4_prog);
+BPF_SKEL_FUNCS(recvmsg6_prog, recvmsg6_prog);
+BPF_SKEL_FUNCS_RAW(recvmsg6_prog, recvmsg6_prog);
+BPF_SKEL_FUNCS(recvmsg_unix_prog, recvmsg_unix_prog);
+BPF_SKEL_FUNCS_RAW(recvmsg_unix_prog, recvmsg_unix_prog);
+BPF_SKEL_FUNCS(getsockname_unix_prog, getsockname_unix_prog);
+BPF_SKEL_FUNCS_RAW(getsockname_unix_prog, getsockname_unix_prog);
+BPF_SKEL_FUNCS(getsockname4_prog, getsockname_v4_prog);
+BPF_SKEL_FUNCS_RAW(getsockname4_prog, getsockname_v4_prog);
+BPF_SKEL_FUNCS(getsockname6_prog, getsockname_v6_prog);
+BPF_SKEL_FUNCS_RAW(getsockname6_prog, getsockname_v6_prog);
+BPF_SKEL_FUNCS(getpeername_unix_prog, getpeername_unix_prog);
+BPF_SKEL_FUNCS_RAW(getpeername_unix_prog, getpeername_unix_prog);
+BPF_SKEL_FUNCS(getpeername4_prog, getpeername_v4_prog);
+BPF_SKEL_FUNCS_RAW(getpeername4_prog, getpeername_v4_prog);
+BPF_SKEL_FUNCS(getpeername6_prog, getpeername_v6_prog);
+BPF_SKEL_FUNCS_RAW(getpeername6_prog, getpeername_v6_prog);
+
 static struct sock_addr_test tests[] = {
+	/* bind - system calls */
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: bind (stream)",
+		bind_v4_prog_load,
+		bind_v4_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: bind deny (stream)",
+		bind_v4_deny_prog_load,
+		bind_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: bind (dgram)",
+		bind_v4_prog_load,
+		bind_v4_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: bind deny (dgram)",
+		bind_v4_deny_prog_load,
+		bind_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: load prog with wrong expected attach type",
+		bind_v4_prog_load,
+		bind_v4_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		LOAD_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: attach prog with wrong attach type",
+		bind_v4_prog_load_raw,
+		bind_v4_prog_destroy_raw,
+		BPF_CGROUP_INET6_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: bind (stream)",
+		bind_v6_prog_load,
+		bind_v6_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: bind deny (stream)",
+		bind_v6_deny_prog_load,
+		bind_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: bind (dgram)",
+		bind_v6_prog_load,
+		bind_v6_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: bind deny (dgram)",
+		bind_v6_deny_prog_load,
+		bind_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: load prog with wrong expected attach type",
+		bind_v6_prog_load,
+		bind_v6_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		LOAD_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: attach prog with wrong attach type",
+		bind_v6_prog_load_raw,
+		bind_v6_prog_destroy_raw,
+		BPF_CGROUP_INET4_BIND,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+
+	/* bind - kernel calls */
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: kernel_bind (stream)",
+		bind_v4_prog_load,
+		bind_v4_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: kernel_bind deny (stream)",
+		bind_v4_deny_prog_load,
+		bind_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: kernel_bind (dgram)",
+		bind_v4_prog_load,
+		bind_v4_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind4: kernel_bind deny (dgram)",
+		bind_v4_deny_prog_load,
+		bind_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: kernel_bind (stream)",
+		bind_v6_prog_load,
+		bind_v6_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: kernel_bind deny (stream)",
+		bind_v6_deny_prog_load,
+		bind_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: kernel_bind (dgram)",
+		bind_v6_prog_load,
+		bind_v6_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_BIND,
+		"bind6: kernel_bind deny (dgram)",
+		bind_v6_deny_prog_load,
+		bind_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_BIND,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		NULL,
+		SYSCALL_EPERM,
+	},
+
+	/* connect - system calls */
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: connect (stream)",
+		connect_v4_prog_load,
+		connect_v4_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: connect deny (stream)",
+		connect_v4_deny_prog_load,
+		connect_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: connect (dgram)",
+		connect_v4_prog_load,
+		connect_v4_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: connect deny (dgram)",
+		connect_v4_deny_prog_load,
+		connect_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: load prog with wrong expected attach type",
+		connect_v4_prog_load,
+		connect_v4_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		LOAD_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: attach prog with wrong attach type",
+		connect_v4_prog_load_raw,
+		connect_v4_prog_destroy_raw,
+		BPF_CGROUP_INET6_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: connect (stream)",
+		connect_v6_prog_load,
+		connect_v6_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: connect deny (stream)",
+		connect_v6_deny_prog_load,
+		connect_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
 	{
 		SOCK_ADDR_TEST_CONNECT,
-		"connect_unix",
+		"connect6: connect (dgram)",
+		connect_v6_prog_load,
+		connect_v6_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: connect deny (dgram)",
+		connect_v6_deny_prog_load,
+		connect_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: load prog with wrong expected attach type",
+		connect_v6_prog_load,
+		connect_v6_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		LOAD_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: attach prog with wrong attach type",
+		connect_v6_prog_load_raw,
+		connect_v6_prog_destroy_raw,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect_unix: connect (stream)",
 		connect_unix_prog_load,
 		connect_unix_prog_destroy,
+		BPF_CGROUP_UNIX_CONNECT,
+		&user_ops,
 		AF_UNIX,
 		SOCK_STREAM,
 		SERVUN_ADDRESS,
@@ -176,12 +1019,631 @@ static struct sock_addr_test tests[] = {
 		SERVUN_REWRITE_ADDRESS,
 		0,
 		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect_unix: connect deny (stream)",
+		connect_unix_deny_prog_load,
+		connect_unix_deny_prog_destroy,
+		BPF_CGROUP_UNIX_CONNECT,
+		&user_ops,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect_unix: attach prog with wrong attach type",
+		connect_unix_prog_load_raw,
+		connect_unix_prog_destroy_raw,
+		BPF_CGROUP_INET4_CONNECT,
+		&user_ops,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+
+	/* connect - kernel calls */
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: kernel_connect (stream)",
+		connect_v4_prog_load,
+		connect_v4_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: kernel_connect deny (stream)",
+		connect_v4_deny_prog_load,
+		connect_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: kernel_connect (dgram)",
+		connect_v4_prog_load,
+		connect_v4_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect4: kernel_connect deny (dgram)",
+		connect_v4_deny_prog_load,
+		connect_v4_deny_prog_destroy,
+		BPF_CGROUP_INET4_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: kernel_connect (stream)",
+		connect_v6_prog_load,
+		connect_v6_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: kernel_connect deny (stream)",
+		connect_v6_deny_prog_load,
+		connect_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: kernel_connect (dgram)",
+		connect_v6_prog_load,
+		connect_v6_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect6: kernel_connect deny (dgram)",
+		connect_v6_deny_prog_load,
+		connect_v6_deny_prog_destroy,
+		BPF_CGROUP_INET6_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect_unix: kernel_connect (dgram)",
+		connect_unix_prog_load,
+		connect_unix_prog_destroy,
+		BPF_CGROUP_UNIX_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_CONNECT,
+		"connect_unix: kernel_connect deny (dgram)",
+		connect_unix_deny_prog_load,
+		connect_unix_deny_prog_destroy,
+		BPF_CGROUP_UNIX_CONNECT,
+		&kern_ops_sock_sendmsg,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SYSCALL_EPERM,
+	},
+
+	/* sendmsg - system calls */
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: sendmsg (dgram)",
+		sendmsg_v4_prog_load,
+		sendmsg_v4_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: sendmsg deny (dgram)",
+		sendmsg_v4_deny_prog_load,
+		sendmsg_v4_deny_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: load prog with wrong expected attach type",
+		sendmsg_v4_prog_load,
+		sendmsg_v4_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		LOAD_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: attach prog with wrong attach type",
+		sendmsg_v4_prog_load_raw,
+		sendmsg_v4_prog_destroy_raw,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sendmsg (dgram)",
+		sendmsg_v6_prog_load,
+		sendmsg_v6_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sendmsg [::] (BSD'ism) (dgram)",
+		sendmsg_v6_preserve_dst_prog_load,
+		sendmsg_v6_preserve_dst_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		WILDCARD6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_PORT,
+		SRC6_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sendmsg deny (dgram)",
+		sendmsg_v6_deny_prog_load,
+		sendmsg_v6_deny_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sendmsg IPv4-mapped IPv6 (dgram)",
+		sendmsg_v6_v4mapped_prog_load,
+		sendmsg_v6_v4mapped_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_ENOTSUPP,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sendmsg dst IP = [::] (BSD'ism) (dgram)",
+		sendmsg_v6_wildcard_prog_load,
+		sendmsg_v6_wildcard_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: load prog with wrong expected attach type",
+		sendmsg_v6_prog_load,
+		sendmsg_v6_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		LOAD_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: attach prog with wrong attach type",
+		sendmsg_v6_prog_load_raw,
+		sendmsg_v6_prog_destroy_raw,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		NULL,
+		0,
+		NULL,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: sendmsg (dgram)",
+		sendmsg_unix_prog_load,
+		sendmsg_unix_prog_destroy,
+		BPF_CGROUP_UNIX_SENDMSG,
+		&user_ops,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: sendmsg deny (dgram)",
+		sendmsg_unix_deny_prog_load,
+		sendmsg_unix_deny_prog_destroy,
+		BPF_CGROUP_UNIX_SENDMSG,
+		&user_ops,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: attach prog with wrong attach type",
+		sendmsg_unix_prog_load_raw,
+		sendmsg_unix_prog_destroy_raw,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&user_ops,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+
+	/* sendmsg - kernel calls (sock_sendmsg) */
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: sock_sendmsg (dgram)",
+		sendmsg_v4_prog_load,
+		sendmsg_v4_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: sock_sendmsg deny (dgram)",
+		sendmsg_v4_deny_prog_load,
+		sendmsg_v4_deny_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sock_sendmsg (dgram)",
+		sendmsg_v6_prog_load,
+		sendmsg_v6_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sock_sendmsg [::] (BSD'ism) (dgram)",
+		sendmsg_v6_preserve_dst_prog_load,
+		sendmsg_v6_preserve_dst_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		WILDCARD6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_PORT,
+		SRC6_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: sock_sendmsg deny (dgram)",
+		sendmsg_v6_deny_prog_load,
+		sendmsg_v6_deny_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: sock_sendmsg (dgram)",
+		sendmsg_unix_prog_load,
+		sendmsg_unix_prog_destroy,
+		BPF_CGROUP_UNIX_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: sock_sendmsg deny (dgram)",
+		sendmsg_unix_deny_prog_load,
+		sendmsg_unix_deny_prog_destroy,
+		BPF_CGROUP_UNIX_SENDMSG,
+		&kern_ops_sock_sendmsg,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SYSCALL_EPERM,
+	},
+
+	/* sendmsg - kernel calls (kernel_sendmsg) */
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: kernel_sendmsg (dgram)",
+		sendmsg_v4_prog_load,
+		sendmsg_v4_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&kern_ops_kernel_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg4: kernel_sendmsg deny (dgram)",
+		sendmsg_v4_deny_prog_load,
+		sendmsg_v4_deny_prog_destroy,
+		BPF_CGROUP_UDP4_SENDMSG,
+		&kern_ops_kernel_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_IP,
+		SERV4_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SRC4_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: kernel_sendmsg (dgram)",
+		sendmsg_v6_prog_load,
+		sendmsg_v6_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg6: kernel_sendmsg [::] (BSD'ism) (dgram)",
+		sendmsg_v6_preserve_dst_prog_load,
+		sendmsg_v6_preserve_dst_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		WILDCARD6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_PORT,
+		SRC6_IP,
+		SUCCESS,
 	},
 	{
 		SOCK_ADDR_TEST_SENDMSG,
-		"sendmsg_unix",
+		"sendmsg6: kernel_sendmsg deny (dgram)",
+		sendmsg_v6_deny_prog_load,
+		sendmsg_v6_deny_prog_destroy,
+		BPF_CGROUP_UDP6_SENDMSG,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SYSCALL_EPERM,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: sock_sendmsg (dgram)",
 		sendmsg_unix_prog_load,
 		sendmsg_unix_prog_destroy,
+		BPF_CGROUP_UNIX_SENDMSG,
+		&kern_ops_kernel_sendmsg,
 		AF_UNIX,
 		SOCK_DGRAM,
 		SERVUN_ADDRESS,
@@ -189,12 +1651,97 @@ static struct sock_addr_test tests[] = {
 		SERVUN_REWRITE_ADDRESS,
 		0,
 		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_SENDMSG,
+		"sendmsg_unix: kernel_sendmsg deny (dgram)",
+		sendmsg_unix_deny_prog_load,
+		sendmsg_unix_deny_prog_destroy,
+		BPF_CGROUP_UNIX_SENDMSG,
+		&kern_ops_kernel_sendmsg,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SYSCALL_EPERM,
+	},
+
+	/* recvmsg - system calls */
+	{
+		SOCK_ADDR_TEST_RECVMSG,
+		"recvmsg4: recvfrom (dgram)",
+		recvmsg4_prog_load,
+		recvmsg4_prog_destroy,
+		BPF_CGROUP_UDP4_RECVMSG,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_RECVMSG,
+		"recvmsg4: attach prog with wrong attach type",
+		recvmsg4_prog_load_raw,
+		recvmsg4_prog_destroy_raw,
+		BPF_CGROUP_UDP6_RECVMSG,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		ATTACH_REJECT,
 	},
 	{
 		SOCK_ADDR_TEST_RECVMSG,
-		"recvmsg_unix-dgram",
+		"recvmsg6: recvfrom (dgram)",
+		recvmsg6_prog_load,
+		recvmsg6_prog_destroy,
+		BPF_CGROUP_UDP6_RECVMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_RECVMSG,
+		"recvmsg6: attach prog with wrong attach type",
+		recvmsg6_prog_load_raw,
+		recvmsg6_prog_destroy_raw,
+		BPF_CGROUP_UDP4_RECVMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_RECVMSG,
+		"recvmsg_unix: recvfrom (dgram)",
 		recvmsg_unix_prog_load,
 		recvmsg_unix_prog_destroy,
+		BPF_CGROUP_UNIX_RECVMSG,
+		&user_ops,
 		AF_UNIX,
 		SOCK_DGRAM,
 		SERVUN_REWRITE_ADDRESS,
@@ -202,12 +1749,15 @@ static struct sock_addr_test tests[] = {
 		SERVUN_REWRITE_ADDRESS,
 		0,
 		SERVUN_ADDRESS,
+		SUCCESS,
 	},
 	{
 		SOCK_ADDR_TEST_RECVMSG,
-		"recvmsg_unix-stream",
+		"recvmsg_unix: recvfrom (stream)",
 		recvmsg_unix_prog_load,
 		recvmsg_unix_prog_destroy,
+		BPF_CGROUP_UNIX_RECVMSG,
+		&user_ops,
 		AF_UNIX,
 		SOCK_STREAM,
 		SERVUN_REWRITE_ADDRESS,
@@ -215,12 +1765,227 @@ static struct sock_addr_test tests[] = {
 		SERVUN_REWRITE_ADDRESS,
 		0,
 		SERVUN_ADDRESS,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_RECVMSG,
+		"recvmsg_unix: attach prog with wrong attach type",
+		recvmsg_unix_prog_load_raw,
+		recvmsg_unix_prog_destroy_raw,
+		BPF_CGROUP_UDP4_RECVMSG,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		SERVUN_ADDRESS,
+		ATTACH_REJECT,
 	},
+
+	/* getsockname - system calls */
 	{
 		SOCK_ADDR_TEST_GETSOCKNAME,
-		"getsockname_unix",
+		"getsockname4: getsockname (stream)",
+		getsockname_v4_prog_load,
+		getsockname_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname4: getsockname (dgram)",
+		getsockname_v4_prog_load,
+		getsockname_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname4: attach prog with wrong attach type",
+		getsockname_v4_prog_load_raw,
+		getsockname_v4_prog_destroy_raw,
+		BPF_CGROUP_INET6_GETSOCKNAME,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname6: getsockname (stream)",
+		getsockname_v6_prog_load,
+		getsockname_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETSOCKNAME,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname6: getsockname (dgram)",
+		getsockname_v6_prog_load,
+		getsockname_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETSOCKNAME,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname6: attach prog with wrong attach type",
+		getsockname_v6_prog_load_raw,
+		getsockname_v6_prog_destroy_raw,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname_unix: getsockname",
+		getsockname_unix_prog_load,
+		getsockname_unix_prog_destroy,
+		BPF_CGROUP_UNIX_GETSOCKNAME,
+		&user_ops,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname_unix: attach prog with wrong attach type",
+		getsockname_unix_prog_load_raw,
+		getsockname_unix_prog_destroy_raw,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&user_ops,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+
+	/* getsockname - kernel calls */
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname4: kernel_getsockname (stream)",
+		getsockname_v4_prog_load,
+		getsockname_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname4: kernel_getsockname (dgram)",
+		getsockname_v4_prog_load,
+		getsockname_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname6: kernel_getsockname (stream)",
+		getsockname_v6_prog_load,
+		getsockname_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETSOCKNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname6: kernel_getsockname (dgram)",
+		getsockname_v6_prog_load,
+		getsockname_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETSOCKNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETSOCKNAME,
+		"getsockname_unix: kernel_getsockname",
 		getsockname_unix_prog_load,
 		getsockname_unix_prog_destroy,
+		BPF_CGROUP_UNIX_GETSOCKNAME,
+		&kern_ops_kernel_sendmsg,
 		AF_UNIX,
 		SOCK_STREAM,
 		SERVUN_ADDRESS,
@@ -228,12 +1993,113 @@ static struct sock_addr_test tests[] = {
 		SERVUN_REWRITE_ADDRESS,
 		0,
 		NULL,
+		SUCCESS,
+	},
+
+	/* getpeername - system calls */
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername4: getpeername (stream)",
+		getpeername_v4_prog_load,
+		getpeername_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETPEERNAME,
+		&user_ops,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername4: getpeername (dgram)",
+		getpeername_v4_prog_load,
+		getpeername_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETPEERNAME,
+		&user_ops,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
 	},
 	{
 		SOCK_ADDR_TEST_GETPEERNAME,
-		"getpeername_unix",
+		"getpeername4: attach prog with wrong attach type",
+		getpeername_v4_prog_load_raw,
+		getpeername_v4_prog_destroy_raw,
+		BPF_CGROUP_INET6_GETSOCKNAME,
+		&user_ops,
+		AF_UNIX,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername6: getpeername (stream)",
+		getpeername_v6_prog_load,
+		getpeername_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETPEERNAME,
+		&user_ops,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername6: getpeername (dgram)",
+		getpeername_v6_prog_load,
+		getpeername_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETPEERNAME,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername6: attach prog with wrong attach type",
+		getpeername_v6_prog_load_raw,
+		getpeername_v6_prog_destroy_raw,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&user_ops,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		ATTACH_REJECT,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername_unix: getpeername",
 		getpeername_unix_prog_load,
 		getpeername_unix_prog_destroy,
+		BPF_CGROUP_UNIX_GETPEERNAME,
+		&user_ops,
 		AF_UNIX,
 		SOCK_STREAM,
 		SERVUN_ADDRESS,
@@ -241,6 +2107,105 @@ static struct sock_addr_test tests[] = {
 		SERVUN_REWRITE_ADDRESS,
 		0,
 		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername_unix: attach prog with wrong attach type",
+		getpeername_unix_prog_load_raw,
+		getpeername_unix_prog_destroy_raw,
+		BPF_CGROUP_INET4_GETSOCKNAME,
+		&user_ops,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		ATTACH_REJECT,
+	},
+
+	/* getpeername - kernel calls */
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername4: kernel_getpeername (stream)",
+		getpeername_v4_prog_load,
+		getpeername_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETPEERNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET,
+		SOCK_STREAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername4: kernel_getpeername (dgram)",
+		getpeername_v4_prog_load,
+		getpeername_v4_prog_destroy,
+		BPF_CGROUP_INET4_GETPEERNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET,
+		SOCK_DGRAM,
+		SERV4_REWRITE_IP,
+		SERV4_REWRITE_PORT,
+		SERV4_IP,
+		SERV4_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername6: kernel_getpeername (stream)",
+		getpeername_v6_prog_load,
+		getpeername_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETPEERNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_STREAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername6: kernel_getpeername (dgram)",
+		getpeername_v6_prog_load,
+		getpeername_v6_prog_destroy,
+		BPF_CGROUP_INET6_GETPEERNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SERV6_IP,
+		SERV6_PORT,
+		NULL,
+		SUCCESS,
+	},
+	{
+		SOCK_ADDR_TEST_GETPEERNAME,
+		"getpeername_unix: kernel_getpeername",
+		getpeername_unix_prog_load,
+		getpeername_unix_prog_destroy,
+		BPF_CGROUP_UNIX_GETPEERNAME,
+		&kern_ops_kernel_sendmsg,
+		AF_UNIX,
+		SOCK_STREAM,
+		SERVUN_ADDRESS,
+		0,
+		SERVUN_REWRITE_ADDRESS,
+		0,
+		NULL,
+		SUCCESS,
 	},
 };
 
@@ -294,28 +2259,40 @@ static int cmp_sock_addr(info_fn fn, int sock1,
 	return cmp_addr(&addr1, len1, addr2, addr2_len, cmp_port);
 }
 
-static int cmp_local_addr(int sock1, const struct sockaddr_storage *addr2,
-			  socklen_t addr2_len, bool cmp_port)
+static int load_sock_addr_kern(void)
 {
-	return cmp_sock_addr(getsockname, sock1, addr2, addr2_len, cmp_port);
+	int err;
+
+	skel = sock_addr_kern__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "skel"))
+		goto err;
+
+	err = 0;
+	goto out;
+err:
+	err = -1;
+out:
+	return err;
 }
 
-static int cmp_peer_addr(int sock1, const struct sockaddr_storage *addr2,
-			 socklen_t addr2_len, bool cmp_port)
+static void unload_sock_addr_kern(void)
 {
-	return cmp_sock_addr(getpeername, sock1, addr2, addr2_len, cmp_port);
+	sock_addr_kern__destroy(skel);
 }
 
-static void test_bind(struct sock_addr_test *test)
+static int test_bind(struct sock_addr_test *test)
 {
 	struct sockaddr_storage expected_addr;
 	socklen_t expected_addr_len = sizeof(struct sockaddr_storage);
 	int serv = -1, client = -1, err;
 
-	serv = start_server(test->socket_family, test->socket_type,
-			    test->requested_addr, test->requested_port, 0);
-	if (!ASSERT_GE(serv, 0, "start_server"))
-		goto cleanup;
+	serv = test->ops->start_server(test->socket_family, test->socket_type,
+				       test->requested_addr,
+				       test->requested_port, 0);
+	if (serv < 0) {
+		err = errno;
+		goto err;
+	}
 
 	err = make_sockaddr(test->socket_family,
 			    test->expected_addr, test->expected_port,
@@ -323,23 +2300,28 @@ static void test_bind(struct sock_addr_test *test)
 	if (!ASSERT_EQ(err, 0, "make_sockaddr"))
 		goto cleanup;
 
-	err = cmp_local_addr(serv, &expected_addr, expected_addr_len, true);
+	err = cmp_sock_addr(test->ops->getsockname, serv, &expected_addr,
+			    expected_addr_len, true);
 	if (!ASSERT_EQ(err, 0, "cmp_local_addr"))
 		goto cleanup;
 
 	/* Try to connect to server just in case */
-	client = connect_to_addr(&expected_addr, expected_addr_len, test->socket_type);
+	client = connect_to_addr(test->socket_type, &expected_addr, expected_addr_len, NULL);
 	if (!ASSERT_GE(client, 0, "connect_to_addr"))
 		goto cleanup;
 
 cleanup:
+	err = 0;
+err:
 	if (client != -1)
 		close(client);
 	if (serv != -1)
-		close(serv);
+		test->ops->close(serv);
+
+	return err;
 }
 
-static void test_connect(struct sock_addr_test *test)
+static int test_connect(struct sock_addr_test *test)
 {
 	struct sockaddr_storage addr, expected_addr, expected_src_addr;
 	socklen_t addr_len = sizeof(struct sockaddr_storage),
@@ -357,9 +2339,12 @@ static void test_connect(struct sock_addr_test *test)
 	if (!ASSERT_EQ(err, 0, "make_sockaddr"))
 		goto cleanup;
 
-	client = connect_to_addr(&addr, addr_len, test->socket_type);
-	if (!ASSERT_GE(client, 0, "connect_to_addr"))
-		goto cleanup;
+	client = test->ops->connect_to_addr(test->socket_type, &addr, addr_len,
+					    NULL);
+	if (client < 0) {
+		err = errno;
+		goto err;
+	}
 
 	err = make_sockaddr(test->socket_family, test->expected_addr, test->expected_port,
 			    &expected_addr, &expected_addr_len);
@@ -373,29 +2358,34 @@ static void test_connect(struct sock_addr_test *test)
 			goto cleanup;
 	}
 
-	err = cmp_peer_addr(client, &expected_addr, expected_addr_len, true);
+	err = cmp_sock_addr(test->ops->getpeername, client, &expected_addr,
+			    expected_addr_len, true);
 	if (!ASSERT_EQ(err, 0, "cmp_peer_addr"))
 		goto cleanup;
 
 	if (test->expected_src_addr) {
-		err = cmp_local_addr(client, &expected_src_addr, expected_src_addr_len, false);
+		err = cmp_sock_addr(test->ops->getsockname, client,
+				    &expected_src_addr, expected_src_addr_len,
+				    false);
 		if (!ASSERT_EQ(err, 0, "cmp_local_addr"))
 			goto cleanup;
 	}
 cleanup:
+	err = 0;
+err:
 	if (client != -1)
-		close(client);
+		test->ops->close(client);
 	if (serv != -1)
 		close(serv);
+
+	return err;
 }
 
-static void test_xmsg(struct sock_addr_test *test)
+static int test_xmsg(struct sock_addr_test *test)
 {
 	struct sockaddr_storage addr, src_addr;
 	socklen_t addr_len = sizeof(struct sockaddr_storage),
 		  src_addr_len = sizeof(struct sockaddr_storage);
-	struct msghdr hdr;
-	struct iovec iov;
 	char data = 'a';
 	int serv = -1, client = -1, err;
 
@@ -408,7 +2398,7 @@ static void test_xmsg(struct sock_addr_test *test)
 	if (!ASSERT_GE(serv, 0, "start_server"))
 		goto cleanup;
 
-	client = socket(test->socket_family, test->socket_type, 0);
+	client = test->ops->socket(test->socket_family, test->socket_type, 0);
 	if (!ASSERT_GE(client, 0, "socket"))
 		goto cleanup;
 
@@ -418,7 +2408,8 @@ static void test_xmsg(struct sock_addr_test *test)
 		if (!ASSERT_EQ(err, 0, "make_sockaddr"))
 			goto cleanup;
 
-		err = bind(client, (const struct sockaddr *) &src_addr, src_addr_len);
+		err = test->ops->bind(client, (struct sockaddr *)&src_addr,
+				      src_addr_len);
 		if (!ASSERT_OK(err, "bind"))
 			goto cleanup;
 	}
@@ -429,17 +2420,13 @@ static void test_xmsg(struct sock_addr_test *test)
 		goto cleanup;
 
 	if (test->socket_type == SOCK_DGRAM) {
-		memset(&iov, 0, sizeof(iov));
-		iov.iov_base = &data;
-		iov.iov_len = sizeof(data);
-
-		memset(&hdr, 0, sizeof(hdr));
-		hdr.msg_name = (void *)&addr;
-		hdr.msg_namelen = addr_len;
-		hdr.msg_iov = &iov;
-		hdr.msg_iovlen = 1;
+		err = test->ops->sendmsg(client, (struct sockaddr *)&addr,
+					 addr_len, &data, sizeof(data));
+		if (err < 0) {
+			err = errno;
+			goto err;
+		}
 
-		err = sendmsg(client, &hdr, 0);
 		if (!ASSERT_EQ(err, sizeof(data), "sendmsg"))
 			goto cleanup;
 	} else {
@@ -489,19 +2476,23 @@ static void test_xmsg(struct sock_addr_test *test)
 	}
 
 cleanup:
+	err = 0;
+err:
 	if (client != -1)
-		close(client);
+		test->ops->close(client);
 	if (serv != -1)
 		close(serv);
+
+	return err;
 }
 
-static void test_getsockname(struct sock_addr_test *test)
+static int test_getsockname(struct sock_addr_test *test)
 {
 	struct sockaddr_storage expected_addr;
 	socklen_t expected_addr_len = sizeof(struct sockaddr_storage);
 	int serv = -1, err;
 
-	serv = start_server(test->socket_family, test->socket_type,
+	serv = test->ops->start_server(test->socket_family, test->socket_type,
 			    test->requested_addr, test->requested_port, 0);
 	if (!ASSERT_GE(serv, 0, "start_server"))
 		goto cleanup;
@@ -512,16 +2503,18 @@ static void test_getsockname(struct sock_addr_test *test)
 	if (!ASSERT_EQ(err, 0, "make_sockaddr"))
 		goto cleanup;
 
-	err = cmp_local_addr(serv, &expected_addr, expected_addr_len, true);
+	err = cmp_sock_addr(test->ops->getsockname, serv, &expected_addr, expected_addr_len, true);
 	if (!ASSERT_EQ(err, 0, "cmp_local_addr"))
 		goto cleanup;
 
 cleanup:
 	if (serv != -1)
-		close(serv);
+		test->ops->close(serv);
+
+	return 0;
 }
 
-static void test_getpeername(struct sock_addr_test *test)
+static int test_getpeername(struct sock_addr_test *test)
 {
 	struct sockaddr_storage addr, expected_addr;
 	socklen_t addr_len = sizeof(struct sockaddr_storage),
@@ -538,7 +2531,8 @@ static void test_getpeername(struct sock_addr_test *test)
 	if (!ASSERT_EQ(err, 0, "make_sockaddr"))
 		goto cleanup;
 
-	client = connect_to_addr(&addr, addr_len, test->socket_type);
+	client = test->ops->connect_to_addr(test->socket_type, &addr, addr_len,
+					    NULL);
 	if (!ASSERT_GE(client, 0, "connect_to_addr"))
 		goto cleanup;
 
@@ -547,19 +2541,58 @@ static void test_getpeername(struct sock_addr_test *test)
 	if (!ASSERT_EQ(err, 0, "make_sockaddr"))
 		goto cleanup;
 
-	err = cmp_peer_addr(client, &expected_addr, expected_addr_len, true);
+	err = cmp_sock_addr(test->ops->getpeername, client, &expected_addr,
+			    expected_addr_len, true);
 	if (!ASSERT_EQ(err, 0, "cmp_peer_addr"))
 		goto cleanup;
 
 cleanup:
 	if (client != -1)
-		close(client);
+		test->ops->close(client);
 	if (serv != -1)
 		close(serv);
+
+	return 0;
+}
+
+static int setup_test_env(struct nstoken **tok)
+{
+	int err;
+
+	SYS_NOFAIL("ip netns delete %s", TEST_NS);
+	SYS(fail, "ip netns add %s", TEST_NS);
+	*tok = open_netns(TEST_NS);
+	if (!ASSERT_OK_PTR(*tok, "netns token"))
+		goto fail;
+
+	SYS(fail, "ip link add dev %s1 type veth peer name %s2", TEST_IF_PREFIX,
+	    TEST_IF_PREFIX);
+	SYS(fail, "ip link set lo up");
+	SYS(fail, "ip link set %s1 up", TEST_IF_PREFIX);
+	SYS(fail, "ip link set %s2 up", TEST_IF_PREFIX);
+	SYS(fail, "ip -4 addr add %s/8 dev %s1", TEST_IPV4, TEST_IF_PREFIX);
+	SYS(fail, "ip -6 addr add %s/128 nodad dev %s1", TEST_IPV6, TEST_IF_PREFIX);
+
+	err = 0;
+	goto out;
+fail:
+	err = -1;
+	close_netns(*tok);
+	*tok = NULL;
+	SYS_NOFAIL("ip netns delete %s", TEST_NS);
+out:
+	return err;
+}
+
+static void cleanup_test_env(struct nstoken *tok)
+{
+	close_netns(tok);
+	SYS_NOFAIL("ip netns delete %s", TEST_NS);
 }
 
 void test_sock_addr(void)
 {
+	struct nstoken *tok = NULL;
 	int cgroup_fd = -1;
 	void *skel;
 
@@ -567,13 +2600,22 @@ void test_sock_addr(void)
 	if (!ASSERT_GE(cgroup_fd, 0, "join_cgroup"))
 		goto cleanup;
 
+	if (!ASSERT_OK(setup_test_env(&tok), "setup_test_env"))
+		goto cleanup;
+
+	if (!ASSERT_OK(load_sock_addr_kern(), "load_sock_addr_kern"))
+		goto cleanup;
+
 	for (size_t i = 0; i < ARRAY_SIZE(tests); ++i) {
 		struct sock_addr_test *test = &tests[i];
+		int err;
 
 		if (!test__start_subtest(test->name))
 			continue;
 
-		skel = test->loadfn(cgroup_fd);
+		skel = test->loadfn(cgroup_fd, test->attach_type,
+				    test->expected_result == LOAD_REJECT ||
+					test->expected_result == ATTACH_REJECT);
 		if (!skel)
 			continue;
 
@@ -583,30 +2625,39 @@ void test_sock_addr(void)
 		 * the future.
 		 */
 		case SOCK_ADDR_TEST_BIND:
-			test_bind(test);
+			err = test_bind(test);
 			break;
 		case SOCK_ADDR_TEST_CONNECT:
-			test_connect(test);
+			err = test_connect(test);
 			break;
 		case SOCK_ADDR_TEST_SENDMSG:
 		case SOCK_ADDR_TEST_RECVMSG:
-			test_xmsg(test);
+			err = test_xmsg(test);
 			break;
 		case SOCK_ADDR_TEST_GETSOCKNAME:
-			test_getsockname(test);
+			err = test_getsockname(test);
 			break;
 		case SOCK_ADDR_TEST_GETPEERNAME:
-			test_getpeername(test);
+			err = test_getpeername(test);
 			break;
 		default:
 			ASSERT_TRUE(false, "Unknown sock addr test type");
 			break;
 		}
 
+		if (test->expected_result == SYSCALL_EPERM)
+			ASSERT_EQ(err, EPERM, "socket operation returns EPERM");
+		else if (test->expected_result == SYSCALL_ENOTSUPP)
+			ASSERT_EQ(err, ENOTSUPP, "socket operation returns ENOTSUPP");
+		else if (test->expected_result == SUCCESS)
+			ASSERT_OK(err, "socket operation succeeds");
+
 		test->destroyfn(skel);
 	}
 
 cleanup:
+	unload_sock_addr_kern();
+	cleanup_test_env(tok);
 	if (cgroup_fd >= 0)
 		close(cgroup_fd);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
index 77e26ecffa9d..1337153eb0ad 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
@@ -131,6 +131,65 @@ out:
 	test_skmsg_load_helpers__destroy(skel);
 }
 
+static void test_skmsg_helpers_with_link(enum bpf_map_type map_type)
+{
+	struct bpf_program *prog, *prog_clone, *prog_clone2;
+	DECLARE_LIBBPF_OPTS(bpf_link_update_opts, opts);
+	struct test_skmsg_load_helpers *skel;
+	struct bpf_link *link, *link2;
+	int err, map;
+
+	skel = test_skmsg_load_helpers__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "test_skmsg_load_helpers__open_and_load"))
+		return;
+
+	prog = skel->progs.prog_msg_verdict;
+	prog_clone = skel->progs.prog_msg_verdict_clone;
+	prog_clone2 = skel->progs.prog_msg_verdict_clone2;
+	map = bpf_map__fd(skel->maps.sock_map);
+
+	link = bpf_program__attach_sockmap(prog, map);
+	if (!ASSERT_OK_PTR(link, "bpf_program__attach_sockmap"))
+		goto out;
+
+	/* Fail since bpf_link for the same prog has been created. */
+	err = bpf_prog_attach(bpf_program__fd(prog), map, BPF_SK_MSG_VERDICT, 0);
+	if (!ASSERT_ERR(err, "bpf_prog_attach"))
+		goto out;
+
+	/* Fail since bpf_link for the same prog type has been created. */
+	link2 = bpf_program__attach_sockmap(prog_clone, map);
+	if (!ASSERT_ERR_PTR(link2, "bpf_program__attach_sockmap")) {
+		bpf_link__detach(link2);
+		goto out;
+	}
+
+	err = bpf_link__update_program(link, prog_clone);
+	if (!ASSERT_OK(err, "bpf_link__update_program"))
+		goto out;
+
+	/* Fail since a prog with different type attempts to do update. */
+	err = bpf_link__update_program(link, skel->progs.prog_skb_verdict);
+	if (!ASSERT_ERR(err, "bpf_link__update_program"))
+		goto out;
+
+	/* Fail since the old prog does not match the one in the kernel. */
+	opts.old_prog_fd = bpf_program__fd(prog_clone2);
+	opts.flags = BPF_F_REPLACE;
+	err = bpf_link_update(bpf_link__fd(link), bpf_program__fd(prog), &opts);
+	if (!ASSERT_ERR(err, "bpf_link_update"))
+		goto out;
+
+	opts.old_prog_fd = bpf_program__fd(prog_clone);
+	opts.flags = BPF_F_REPLACE;
+	err = bpf_link_update(bpf_link__fd(link), bpf_program__fd(prog), &opts);
+	if (!ASSERT_OK(err, "bpf_link_update"))
+		goto out;
+out:
+	bpf_link__detach(link);
+	test_skmsg_load_helpers__destroy(skel);
+}
+
 static void test_sockmap_update(enum bpf_map_type map_type)
 {
 	int err, prog, src;
@@ -298,6 +357,40 @@ out:
 	test_sockmap_skb_verdict_attach__destroy(skel);
 }
 
+static void test_sockmap_skb_verdict_attach_with_link(void)
+{
+	struct test_sockmap_skb_verdict_attach *skel;
+	struct bpf_program *prog;
+	struct bpf_link *link;
+	int err, map;
+
+	skel = test_sockmap_skb_verdict_attach__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "open_and_load"))
+		return;
+	prog = skel->progs.prog_skb_verdict;
+	map = bpf_map__fd(skel->maps.sock_map);
+	link = bpf_program__attach_sockmap(prog, map);
+	if (!ASSERT_OK_PTR(link, "bpf_program__attach_sockmap"))
+		goto out;
+
+	bpf_link__detach(link);
+
+	err = bpf_prog_attach(bpf_program__fd(prog), map, BPF_SK_SKB_STREAM_VERDICT, 0);
+	if (!ASSERT_OK(err, "bpf_prog_attach"))
+		goto out;
+
+	/* Fail since attaching with the same prog/map has been done. */
+	link = bpf_program__attach_sockmap(prog, map);
+	if (!ASSERT_ERR_PTR(link, "bpf_program__attach_sockmap"))
+		bpf_link__detach(link);
+
+	err = bpf_prog_detach2(bpf_program__fd(prog), map, BPF_SK_SKB_STREAM_VERDICT);
+	if (!ASSERT_OK(err, "bpf_prog_detach2"))
+		goto out;
+out:
+	test_sockmap_skb_verdict_attach__destroy(skel);
+}
+
 static __u32 query_prog_id(int prog_fd)
 {
 	struct bpf_prog_info info = {};
@@ -475,30 +568,19 @@ out:
 		test_sockmap_drop_prog__destroy(drop);
 }
 
-static void test_sockmap_skb_verdict_peek(void)
+static void test_sockmap_skb_verdict_peek_helper(int map)
 {
-	int err, map, verdict, s, c1, p1, zero = 0, sent, recvd, avail;
-	struct test_sockmap_pass_prog *pass;
+	int err, s, c1, p1, zero = 0, sent, recvd, avail;
 	char snd[256] = "0123456789";
 	char rcv[256] = "0";
 
-	pass = test_sockmap_pass_prog__open_and_load();
-	if (!ASSERT_OK_PTR(pass, "open_and_load"))
-		return;
-	verdict = bpf_program__fd(pass->progs.prog_skb_verdict);
-	map = bpf_map__fd(pass->maps.sock_map_rx);
-
-	err = bpf_prog_attach(verdict, map, BPF_SK_SKB_STREAM_VERDICT, 0);
-	if (!ASSERT_OK(err, "bpf_prog_attach"))
-		goto out;
-
 	s = socket_loopback(AF_INET, SOCK_STREAM);
 	if (!ASSERT_GT(s, -1, "socket_loopback(s)"))
-		goto out;
+		return;
 
 	err = create_pair(s, AF_INET, SOCK_STREAM, &c1, &p1);
 	if (!ASSERT_OK(err, "create_pairs(s)"))
-		goto out;
+		return;
 
 	err = bpf_map_update_elem(map, &zero, &c1, BPF_NOEXIST);
 	if (!ASSERT_OK(err, "bpf_map_update_elem(c1)"))
@@ -520,7 +602,58 @@ static void test_sockmap_skb_verdict_peek(void)
 out_close:
 	close(c1);
 	close(p1);
+}
+
+static void test_sockmap_skb_verdict_peek(void)
+{
+	struct test_sockmap_pass_prog *pass;
+	int err, map, verdict;
+
+	pass = test_sockmap_pass_prog__open_and_load();
+	if (!ASSERT_OK_PTR(pass, "open_and_load"))
+		return;
+	verdict = bpf_program__fd(pass->progs.prog_skb_verdict);
+	map = bpf_map__fd(pass->maps.sock_map_rx);
+
+	err = bpf_prog_attach(verdict, map, BPF_SK_SKB_STREAM_VERDICT, 0);
+	if (!ASSERT_OK(err, "bpf_prog_attach"))
+		goto out;
+
+	test_sockmap_skb_verdict_peek_helper(map);
+
+out:
+	test_sockmap_pass_prog__destroy(pass);
+}
+
+static void test_sockmap_skb_verdict_peek_with_link(void)
+{
+	struct test_sockmap_pass_prog *pass;
+	struct bpf_program *prog;
+	struct bpf_link *link;
+	int err, map;
+
+	pass = test_sockmap_pass_prog__open_and_load();
+	if (!ASSERT_OK_PTR(pass, "open_and_load"))
+		return;
+	prog = pass->progs.prog_skb_verdict;
+	map = bpf_map__fd(pass->maps.sock_map_rx);
+	link = bpf_program__attach_sockmap(prog, map);
+	if (!ASSERT_OK_PTR(link, "bpf_program__attach_sockmap"))
+		goto out;
+
+	err = bpf_link__update_program(link, pass->progs.prog_skb_verdict_clone);
+	if (!ASSERT_OK(err, "bpf_link__update_program"))
+		goto out;
+
+	/* Fail since a prog with different attach type attempts to do update. */
+	err = bpf_link__update_program(link, pass->progs.prog_skb_parser);
+	if (!ASSERT_ERR(err, "bpf_link__update_program"))
+		goto out;
+
+	test_sockmap_skb_verdict_peek_helper(map);
+	ASSERT_EQ(pass->bss->clone_called, 1, "clone_called");
 out:
+	bpf_link__detach(link);
 	test_sockmap_pass_prog__destroy(pass);
 }
 
@@ -788,6 +921,8 @@ void test_sockmap_basic(void)
 		test_sockmap_skb_verdict_attach(BPF_SK_SKB_STREAM_VERDICT,
 						BPF_SK_SKB_VERDICT);
 	}
+	if (test__start_subtest("sockmap skb_verdict attach_with_link"))
+		test_sockmap_skb_verdict_attach_with_link();
 	if (test__start_subtest("sockmap msg_verdict progs query"))
 		test_sockmap_progs_query(BPF_SK_MSG_VERDICT);
 	if (test__start_subtest("sockmap stream_parser progs query"))
@@ -804,6 +939,8 @@ void test_sockmap_basic(void)
 		test_sockmap_skb_verdict_fionread(false);
 	if (test__start_subtest("sockmap skb_verdict msg_f_peek"))
 		test_sockmap_skb_verdict_peek();
+	if (test__start_subtest("sockmap skb_verdict msg_f_peek with link"))
+		test_sockmap_skb_verdict_peek_with_link();
 	if (test__start_subtest("sockmap unconnected af_unix"))
 		test_sockmap_unconnected_unix();
 	if (test__start_subtest("sockmap one socket to many map entries"))
@@ -812,4 +949,8 @@ void test_sockmap_basic(void)
 		test_sockmap_many_maps();
 	if (test__start_subtest("sockmap same socket replace"))
 		test_sockmap_same_sock();
+	if (test__start_subtest("sockmap sk_msg attach sockmap helpers with link"))
+		test_skmsg_helpers_with_link(BPF_MAP_TYPE_SOCKMAP);
+	if (test__start_subtest("sockhash sk_msg attach sockhash helpers with link"))
+		test_skmsg_helpers_with_link(BPF_MAP_TYPE_SOCKHASH);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c
index a92807bfcd13..e91b59366030 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c
@@ -767,6 +767,24 @@ static void test_msg_redir_to_connected(struct test_sockmap_listen *skel,
 	xbpf_prog_detach2(verdict, sock_map, BPF_SK_MSG_VERDICT);
 }
 
+static void test_msg_redir_to_connected_with_link(struct test_sockmap_listen *skel,
+						  struct bpf_map *inner_map, int family,
+						  int sotype)
+{
+	int prog_msg_verdict = bpf_program__fd(skel->progs.prog_msg_verdict);
+	int verdict_map = bpf_map__fd(skel->maps.verdict_map);
+	int sock_map = bpf_map__fd(inner_map);
+	int link_fd;
+
+	link_fd = bpf_link_create(prog_msg_verdict, sock_map, BPF_SK_MSG_VERDICT, NULL);
+	if (!ASSERT_GE(link_fd, 0, "bpf_link_create"))
+		return;
+
+	redir_to_connected(family, sotype, sock_map, verdict_map, REDIR_EGRESS);
+
+	close(link_fd);
+}
+
 static void redir_to_listening(int family, int sotype, int sock_mapfd,
 			       int verd_mapfd, enum redir_mode mode)
 {
@@ -869,6 +887,24 @@ static void test_msg_redir_to_listening(struct test_sockmap_listen *skel,
 	xbpf_prog_detach2(verdict, sock_map, BPF_SK_MSG_VERDICT);
 }
 
+static void test_msg_redir_to_listening_with_link(struct test_sockmap_listen *skel,
+						  struct bpf_map *inner_map, int family,
+						  int sotype)
+{
+	struct bpf_program *verdict = skel->progs.prog_msg_verdict;
+	int verdict_map = bpf_map__fd(skel->maps.verdict_map);
+	int sock_map = bpf_map__fd(inner_map);
+	struct bpf_link *link;
+
+	link = bpf_program__attach_sockmap(verdict, sock_map);
+	if (!ASSERT_OK_PTR(link, "bpf_program__attach_sockmap"))
+		return;
+
+	redir_to_listening(family, sotype, sock_map, verdict_map, REDIR_EGRESS);
+
+	bpf_link__detach(link);
+}
+
 static void redir_partial(int family, int sotype, int sock_map, int parser_map)
 {
 	int s, c0 = -1, c1 = -1, p0 = -1, p1 = -1;
@@ -1316,7 +1352,9 @@ static void test_redir(struct test_sockmap_listen *skel, struct bpf_map *map,
 		TEST(test_skb_redir_to_listening),
 		TEST(test_skb_redir_partial),
 		TEST(test_msg_redir_to_connected),
+		TEST(test_msg_redir_to_connected_with_link),
 		TEST(test_msg_redir_to_listening),
+		TEST(test_msg_redir_to_listening_with_link),
 	};
 	const char *family_name, *map_name;
 	const struct redir_test *t;
diff --git a/tools/testing/selftests/bpf/prog_tests/sockopt.c b/tools/testing/selftests/bpf/prog_tests/sockopt.c
index 5a4491d4edfe..eaac83a7f388 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockopt.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockopt.c
@@ -24,6 +24,7 @@ enum sockopt_test_error {
 static struct sockopt_test {
 	const char			*descr;
 	const struct bpf_insn		insns[64];
+	enum bpf_prog_type		prog_type;
 	enum bpf_attach_type		attach_type;
 	enum bpf_attach_type		expected_attach_type;
 
@@ -928,9 +929,40 @@ static struct sockopt_test {
 
 		.error = EPERM_SETSOCKOPT,
 	},
+
+	/* ==================== prog_type ====================  */
+
+	{
+		.descr = "can attach only BPF_CGROUP_SETSOCKOP",
+		.insns = {
+			/* return 1 */
+			BPF_MOV64_IMM(BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+
+		},
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+		.attach_type = BPF_CGROUP_SETSOCKOPT,
+		.expected_attach_type = 0,
+		.error = DENY_ATTACH,
+	},
+
+	{
+		.descr = "can attach only BPF_CGROUP_GETSOCKOP",
+		.insns = {
+			/* return 1 */
+			BPF_MOV64_IMM(BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+
+		},
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+		.attach_type = BPF_CGROUP_GETSOCKOPT,
+		.expected_attach_type = 0,
+		.error = DENY_ATTACH,
+	},
 };
 
 static int load_prog(const struct bpf_insn *insns,
+		     enum bpf_prog_type prog_type,
 		     enum bpf_attach_type expected_attach_type)
 {
 	LIBBPF_OPTS(bpf_prog_load_opts, opts,
@@ -947,7 +979,7 @@ static int load_prog(const struct bpf_insn *insns,
 	}
 	insns_cnt++;
 
-	fd = bpf_prog_load(BPF_PROG_TYPE_CGROUP_SOCKOPT, NULL, "GPL", insns, insns_cnt, &opts);
+	fd = bpf_prog_load(prog_type, NULL, "GPL", insns, insns_cnt, &opts);
 	if (verbose && fd < 0)
 		fprintf(stderr, "%s\n", bpf_log_buf);
 
@@ -1036,13 +1068,18 @@ static int call_getsockopt(bool use_io_uring, int fd, int level, int optname,
 	return getsockopt(fd, level, optname, optval, optlen);
 }
 
-static int run_test(int cgroup_fd, struct sockopt_test *test, bool use_io_uring)
+static int run_test(int cgroup_fd, struct sockopt_test *test, bool use_io_uring,
+		    bool use_link)
 {
-	int sock_fd, err, prog_fd;
+	int prog_type = BPF_PROG_TYPE_CGROUP_SOCKOPT;
+	int sock_fd, err, prog_fd, link_fd = -1;
 	void *optval = NULL;
 	int ret = 0;
 
-	prog_fd = load_prog(test->insns, test->expected_attach_type);
+	if (test->prog_type)
+		prog_type = test->prog_type;
+
+	prog_fd = load_prog(test->insns, prog_type, test->expected_attach_type);
 	if (prog_fd < 0) {
 		if (test->error == DENY_LOAD)
 			return 0;
@@ -1051,7 +1088,12 @@ static int run_test(int cgroup_fd, struct sockopt_test *test, bool use_io_uring)
 		return -1;
 	}
 
-	err = bpf_prog_attach(prog_fd, cgroup_fd, test->attach_type, 0);
+	if (use_link) {
+		err = bpf_link_create(prog_fd, cgroup_fd, test->attach_type, NULL);
+		link_fd = err;
+	} else {
+		err = bpf_prog_attach(prog_fd, cgroup_fd, test->attach_type, 0);
+	}
 	if (err < 0) {
 		if (test->error == DENY_ATTACH)
 			goto close_prog_fd;
@@ -1142,7 +1184,12 @@ free_optval:
 close_sock_fd:
 	close(sock_fd);
 detach_prog:
-	bpf_prog_detach2(prog_fd, cgroup_fd, test->attach_type);
+	if (use_link) {
+		if (link_fd >= 0)
+			close(link_fd);
+	} else {
+		bpf_prog_detach2(prog_fd, cgroup_fd, test->attach_type);
+	}
 close_prog_fd:
 	close(prog_fd);
 	return ret;
@@ -1160,10 +1207,12 @@ void test_sockopt(void)
 		if (!test__start_subtest(tests[i].descr))
 			continue;
 
-		ASSERT_OK(run_test(cgroup_fd, &tests[i], false),
+		ASSERT_OK(run_test(cgroup_fd, &tests[i], false, false),
+			  tests[i].descr);
+		ASSERT_OK(run_test(cgroup_fd, &tests[i], false, true),
 			  tests[i].descr);
 		if (tests[i].io_uring_support)
-			ASSERT_OK(run_test(cgroup_fd, &tests[i], true),
+			ASSERT_OK(run_test(cgroup_fd, &tests[i], true, false),
 				  tests[i].descr);
 	}
 
diff --git a/tools/testing/selftests/bpf/prog_tests/sockopt_inherit.c b/tools/testing/selftests/bpf/prog_tests/sockopt_inherit.c
index 917f486db826..1d3a20f01b60 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockopt_inherit.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockopt_inherit.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <test_progs.h>
 #include "cgroup_helpers.h"
+#include "network_helpers.h"
 
 #include "sockopt_inherit.skel.h"
 
@@ -9,35 +10,6 @@
 #define CUSTOM_INHERIT2			1
 #define CUSTOM_LISTENER			2
 
-static int connect_to_server(int server_fd)
-{
-	struct sockaddr_storage addr;
-	socklen_t len = sizeof(addr);
-	int fd;
-
-	fd = socket(AF_INET, SOCK_STREAM, 0);
-	if (fd < 0) {
-		log_err("Failed to create client socket");
-		return -1;
-	}
-
-	if (getsockname(server_fd, (struct sockaddr *)&addr, &len)) {
-		log_err("Failed to get server addr");
-		goto out;
-	}
-
-	if (connect(fd, (const struct sockaddr *)&addr, len) < 0) {
-		log_err("Fail to connect to server");
-		goto out;
-	}
-
-	return fd;
-
-out:
-	close(fd);
-	return -1;
-}
-
 static int verify_sockopt(int fd, int optname, const char *msg, char expected)
 {
 	socklen_t optlen = 1;
@@ -98,47 +70,36 @@ static void *server_thread(void *arg)
 	return (void *)(long)err;
 }
 
-static int start_server(void)
+static int custom_cb(int fd, const struct post_socket_opts *opts)
 {
-	struct sockaddr_in addr = {
-		.sin_family = AF_INET,
-		.sin_addr.s_addr = htonl(INADDR_LOOPBACK),
-	};
 	char buf;
 	int err;
-	int fd;
 	int i;
 
-	fd = socket(AF_INET, SOCK_STREAM, 0);
-	if (fd < 0) {
-		log_err("Failed to create server socket");
-		return -1;
-	}
-
 	for (i = CUSTOM_INHERIT1; i <= CUSTOM_LISTENER; i++) {
 		buf = 0x01;
 		err = setsockopt(fd, SOL_CUSTOM, i, &buf, 1);
 		if (err) {
 			log_err("Failed to call setsockopt(%d)", i);
-			close(fd);
 			return -1;
 		}
 	}
 
-	if (bind(fd, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
-		log_err("Failed to bind socket");
-		close(fd);
-		return -1;
-	}
-
-	return fd;
+	return 0;
 }
 
 static void run_test(int cgroup_fd)
 {
 	struct bpf_link *link_getsockopt = NULL;
 	struct bpf_link *link_setsockopt = NULL;
+	struct network_helper_opts opts = {
+		.post_socket_cb = custom_cb,
+	};
 	int server_fd = -1, client_fd;
+	struct sockaddr_in addr = {
+		.sin_family = AF_INET,
+		.sin_addr.s_addr = htonl(INADDR_LOOPBACK),
+	};
 	struct sockopt_inherit *obj;
 	void *server_err;
 	pthread_t tid;
@@ -160,7 +121,8 @@ static void run_test(int cgroup_fd)
 	if (!ASSERT_OK_PTR(link_setsockopt, "cg-attach-setsockopt"))
 		goto close_bpf_object;
 
-	server_fd = start_server();
+	server_fd = start_server_addr(SOCK_STREAM, (struct sockaddr_storage *)&addr,
+				      sizeof(addr), &opts);
 	if (!ASSERT_GE(server_fd, 0, "start_server"))
 		goto close_bpf_object;
 
@@ -173,7 +135,7 @@ static void run_test(int cgroup_fd)
 	pthread_cond_wait(&server_started, &server_started_mtx);
 	pthread_mutex_unlock(&server_started_mtx);
 
-	client_fd = connect_to_server(server_fd);
+	client_fd = connect_to_fd(server_fd, 0);
 	if (!ASSERT_GE(client_fd, 0, "connect_to_server"))
 		goto close_server_fd;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
index 5db9eec24b5b..0832fd787457 100644
--- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
+++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
@@ -35,7 +35,7 @@ retry:
 	pmu_fd = syscall(__NR_perf_event_open, &attr, -1 /* pid */,
 			 0 /* cpu 0 */, -1 /* group id */,
 			 0 /* flags */);
-	if (pmu_fd < 0 && errno == ENOENT) {
+	if (pmu_fd < 0 && (errno == ENOENT || errno == EOPNOTSUPP)) {
 		printf("%s:SKIP:no PERF_COUNT_HW_CPU_CYCLES\n", __func__);
 		test__skip();
 		goto cleanup;
diff --git a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
index dbe06aeaa2b2..b1073d36d77a 100644
--- a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
@@ -530,7 +530,7 @@ static int wait_netstamp_needed_key(void)
 	__u64 tstamp = 0;
 
 	nstoken = open_netns(NS_DST);
-	if (!nstoken)
+	if (!ASSERT_OK_PTR(nstoken, "setns dst"))
 		return -1;
 
 	srv_fd = start_server(AF_INET6, SOCK_DGRAM, "::1", 0, 0);
diff --git a/tools/testing/selftests/bpf/prog_tests/tcp_rtt.c b/tools/testing/selftests/bpf/prog_tests/tcp_rtt.c
index 8fe84da1b9b4..f2b99d95d916 100644
--- a/tools/testing/selftests/bpf/prog_tests/tcp_rtt.c
+++ b/tools/testing/selftests/bpf/prog_tests/tcp_rtt.c
@@ -10,6 +10,9 @@ struct tcp_rtt_storage {
 	__u32 delivered;
 	__u32 delivered_ce;
 	__u32 icsk_retransmits;
+
+	__u32 mrtt_us;	/* args[0] */
+	__u32 srtt;	/* args[1] */
 };
 
 static void send_byte(int fd)
@@ -83,6 +86,17 @@ static int verify_sk(int map_fd, int client_fd, const char *msg, __u32 invoked,
 		err++;
 	}
 
+	/* Precise values of mrtt and srtt are unavailable, just make sure they are nonzero */
+	if (val.mrtt_us == 0) {
+		log_err("%s: unexpected bpf_tcp_sock.args[0] (mrtt_us) %u == 0", msg, val.mrtt_us);
+		err++;
+	}
+
+	if (val.srtt == 0) {
+		log_err("%s: unexpected bpf_tcp_sock.args[1] (srtt) %u == 0", msg, val.srtt);
+		err++;
+	}
+
 	return err;
 }
 
diff --git a/tools/testing/selftests/bpf/prog_tests/test_struct_ops_module.c b/tools/testing/selftests/bpf/prog_tests/test_struct_ops_module.c
index ee5372c7f2c7..29e183a80f49 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_struct_ops_module.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_struct_ops_module.c
@@ -4,6 +4,8 @@
 #include <time.h>
 
 #include "struct_ops_module.skel.h"
+#include "struct_ops_nulled_out_cb.skel.h"
+#include "struct_ops_forgotten_cb.skel.h"
 
 static void check_map_info(struct bpf_map_info *info)
 {
@@ -66,6 +68,7 @@ static void test_struct_ops_load(void)
 	 * auto-loading, or it will fail to load.
 	 */
 	bpf_program__set_autoload(skel->progs.test_2, false);
+	bpf_map__set_autocreate(skel->maps.testmod_zeroed, false);
 
 	err = struct_ops_module__load(skel);
 	if (!ASSERT_OK(err, "struct_ops_module_load"))
@@ -93,9 +96,163 @@ cleanup:
 	struct_ops_module__destroy(skel);
 }
 
+static void test_struct_ops_not_zeroed(void)
+{
+	struct struct_ops_module *skel;
+	int err;
+
+	/* zeroed is 0, and zeroed_op is null */
+	skel = struct_ops_module__open();
+	if (!ASSERT_OK_PTR(skel, "struct_ops_module_open"))
+		return;
+
+	skel->struct_ops.testmod_zeroed->zeroed = 0;
+	/* zeroed_op prog should be not loaded automatically now */
+	skel->struct_ops.testmod_zeroed->zeroed_op = NULL;
+
+	err = struct_ops_module__load(skel);
+	ASSERT_OK(err, "struct_ops_module_load");
+
+	struct_ops_module__destroy(skel);
+
+	/* zeroed is not 0 */
+	skel = struct_ops_module__open();
+	if (!ASSERT_OK_PTR(skel, "struct_ops_module_open_not_zeroed"))
+		return;
+
+	/* libbpf should reject the testmod_zeroed since struct
+	 * bpf_testmod_ops in the kernel has no "zeroed" field and the
+	 * value of "zeroed" is non-zero.
+	 */
+	skel->struct_ops.testmod_zeroed->zeroed = 0xdeadbeef;
+	skel->struct_ops.testmod_zeroed->zeroed_op = NULL;
+	err = struct_ops_module__load(skel);
+	ASSERT_ERR(err, "struct_ops_module_load_not_zeroed");
+
+	struct_ops_module__destroy(skel);
+
+	/* zeroed_op is not null */
+	skel = struct_ops_module__open();
+	if (!ASSERT_OK_PTR(skel, "struct_ops_module_open_not_zeroed_op"))
+		return;
+
+	/* libbpf should reject the testmod_zeroed since the value of its
+	 * "zeroed_op" is not null.
+	 */
+	skel->struct_ops.testmod_zeroed->zeroed_op = skel->progs.test_3;
+	err = struct_ops_module__load(skel);
+	ASSERT_ERR(err, "struct_ops_module_load_not_zeroed_op");
+
+	struct_ops_module__destroy(skel);
+}
+
+/* The signature of an implementation might not match the signature of the
+ * function pointer prototype defined in the BPF program. This mismatch
+ * should be allowed as long as the behavior of the operator program
+ * adheres to the signature in the kernel. Libbpf should not enforce the
+ * signature; rather, let the kernel verifier handle the enforcement.
+ */
+static void test_struct_ops_incompatible(void)
+{
+	struct struct_ops_module *skel;
+	struct bpf_link *link;
+	int err;
+
+	skel = struct_ops_module__open();
+	if (!ASSERT_OK_PTR(skel, "struct_ops_module_open"))
+		return;
+
+	bpf_map__set_autocreate(skel->maps.testmod_zeroed, false);
+
+	err = struct_ops_module__load(skel);
+	if (!ASSERT_OK(err, "skel_load"))
+		goto cleanup;
+
+	link = bpf_map__attach_struct_ops(skel->maps.testmod_incompatible);
+	if (ASSERT_OK_PTR(link, "attach_struct_ops"))
+		bpf_link__destroy(link);
+
+cleanup:
+	struct_ops_module__destroy(skel);
+}
+
+/* validate that it's ok to "turn off" callback that kernel supports */
+static void test_struct_ops_nulled_out_cb(void)
+{
+	struct struct_ops_nulled_out_cb *skel;
+	int err;
+
+	skel = struct_ops_nulled_out_cb__open();
+	if (!ASSERT_OK_PTR(skel, "skel_open"))
+		return;
+
+	/* kernel knows about test_1, but we still null it out */
+	skel->struct_ops.ops->test_1 = NULL;
+
+	err = struct_ops_nulled_out_cb__load(skel);
+	if (!ASSERT_OK(err, "skel_load"))
+		goto cleanup;
+
+	ASSERT_FALSE(bpf_program__autoload(skel->progs.test_1_turn_off), "prog_autoload");
+	ASSERT_LT(bpf_program__fd(skel->progs.test_1_turn_off), 0, "prog_fd");
+
+cleanup:
+	struct_ops_nulled_out_cb__destroy(skel);
+}
+
+/* validate that libbpf generates reasonable error message if struct_ops is
+ * not referenced in any struct_ops map
+ */
+static void test_struct_ops_forgotten_cb(void)
+{
+	struct struct_ops_forgotten_cb *skel;
+	char *log;
+	int err;
+
+	skel = struct_ops_forgotten_cb__open();
+	if (!ASSERT_OK_PTR(skel, "skel_open"))
+		return;
+
+	start_libbpf_log_capture();
+
+	err = struct_ops_forgotten_cb__load(skel);
+	if (!ASSERT_ERR(err, "skel_load"))
+		goto cleanup;
+
+	log = stop_libbpf_log_capture();
+	ASSERT_HAS_SUBSTR(log,
+			  "prog 'test_1_forgotten': SEC(\"struct_ops\") program isn't referenced anywhere, did you forget to use it?",
+			  "libbpf_log");
+	free(log);
+
+	struct_ops_forgotten_cb__destroy(skel);
+
+	/* now let's programmatically use it, we should be fine now */
+	skel = struct_ops_forgotten_cb__open();
+	if (!ASSERT_OK_PTR(skel, "skel_open"))
+		return;
+
+	skel->struct_ops.ops->test_1 = skel->progs.test_1_forgotten; /* not anymore */
+
+	err = struct_ops_forgotten_cb__load(skel);
+	if (!ASSERT_OK(err, "skel_load"))
+		goto cleanup;
+
+cleanup:
+	struct_ops_forgotten_cb__destroy(skel);
+}
+
 void serial_test_struct_ops_module(void)
 {
-	if (test__start_subtest("test_struct_ops_load"))
+	if (test__start_subtest("struct_ops_load"))
 		test_struct_ops_load();
+	if (test__start_subtest("struct_ops_not_zeroed"))
+		test_struct_ops_not_zeroed();
+	if (test__start_subtest("struct_ops_incompatible"))
+		test_struct_ops_incompatible();
+	if (test__start_subtest("struct_ops_null_out_cb"))
+		test_struct_ops_nulled_out_cb();
+	if (test__start_subtest("struct_ops_forgotten_cb"))
+		test_struct_ops_forgotten_cb();
 }
 
diff --git a/tools/testing/selftests/bpf/prog_tests/test_tunnel.c b/tools/testing/selftests/bpf/prog_tests/test_tunnel.c
index 5f1fb0a2ea56..cec746e77cd3 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_tunnel.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_tunnel.c
@@ -612,6 +612,8 @@ static void test_ipip_tunnel(enum ipip_encap encap)
 
 	/* ping from at_ns0 namespace test */
 	nstoken = open_netns("at_ns0");
+	if (!ASSERT_OK_PTR(nstoken, "setns"))
+		goto done;
 	err = test_ping(AF_INET, IP4_ADDR_TUNL_DEV1);
 	if (!ASSERT_OK(err, "test_ping"))
 		goto done;
@@ -666,6 +668,8 @@ static void test_xfrm_tunnel(void)
 
 	/* ping from at_ns0 namespace test */
 	nstoken = open_netns("at_ns0");
+	if (!ASSERT_OK_PTR(nstoken, "setns"))
+		goto done;
 	err = test_ping(AF_INET, IP4_ADDR_TUNL_DEV1);
 	close_netns(nstoken);
 	if (!ASSERT_OK(err, "test_ping"))
diff --git a/tools/testing/selftests/bpf/prog_tests/trace_printk.c b/tools/testing/selftests/bpf/prog_tests/trace_printk.c
index 7b9124d506a5..e56e88596d64 100644
--- a/tools/testing/selftests/bpf/prog_tests/trace_printk.c
+++ b/tools/testing/selftests/bpf/prog_tests/trace_printk.c
@@ -5,18 +5,19 @@
 
 #include "trace_printk.lskel.h"
 
-#define TRACEFS_PIPE	"/sys/kernel/tracing/trace_pipe"
-#define DEBUGFS_PIPE	"/sys/kernel/debug/tracing/trace_pipe"
 #define SEARCHMSG	"testing,testing"
 
+static void trace_pipe_cb(const char *str, void *data)
+{
+	if (strstr(str, SEARCHMSG) != NULL)
+		(*(int *)data)++;
+}
+
 void serial_test_trace_printk(void)
 {
 	struct trace_printk_lskel__bss *bss;
-	int err = 0, iter = 0, found = 0;
 	struct trace_printk_lskel *skel;
-	char *buf = NULL;
-	FILE *fp = NULL;
-	size_t buflen;
+	int err = 0, found = 0;
 
 	skel = trace_printk_lskel__open();
 	if (!ASSERT_OK_PTR(skel, "trace_printk__open"))
@@ -35,16 +36,6 @@ void serial_test_trace_printk(void)
 	if (!ASSERT_OK(err, "trace_printk__attach"))
 		goto cleanup;
 
-	if (access(TRACEFS_PIPE, F_OK) == 0)
-		fp = fopen(TRACEFS_PIPE, "r");
-	else
-		fp = fopen(DEBUGFS_PIPE, "r");
-	if (!ASSERT_OK_PTR(fp, "fopen(TRACE_PIPE)"))
-		goto cleanup;
-
-	/* We do not want to wait forever if this test fails... */
-	fcntl(fileno(fp), F_SETFL, O_NONBLOCK);
-
 	/* wait for tracepoint to trigger */
 	usleep(1);
 	trace_printk_lskel__detach(skel);
@@ -56,21 +47,12 @@ void serial_test_trace_printk(void)
 		goto cleanup;
 
 	/* verify our search string is in the trace buffer */
-	while (getline(&buf, &buflen, fp) >= 0 || errno == EAGAIN) {
-		if (strstr(buf, SEARCHMSG) != NULL)
-			found++;
-		if (found == bss->trace_printk_ran)
-			break;
-		if (++iter > 1000)
-			break;
-	}
+	ASSERT_OK(read_trace_pipe_iter(trace_pipe_cb, &found, 1000),
+		 "read_trace_pipe_iter");
 
 	if (!ASSERT_EQ(found, bss->trace_printk_ran, "found"))
 		goto cleanup;
 
 cleanup:
 	trace_printk_lskel__destroy(skel);
-	free(buf);
-	if (fp)
-		fclose(fp);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/trace_vprintk.c b/tools/testing/selftests/bpf/prog_tests/trace_vprintk.c
index 44ea2fd88f4c..2af6a6f2096a 100644
--- a/tools/testing/selftests/bpf/prog_tests/trace_vprintk.c
+++ b/tools/testing/selftests/bpf/prog_tests/trace_vprintk.c
@@ -5,18 +5,19 @@
 
 #include "trace_vprintk.lskel.h"
 
-#define TRACEFS_PIPE	"/sys/kernel/tracing/trace_pipe"
-#define DEBUGFS_PIPE	"/sys/kernel/debug/tracing/trace_pipe"
 #define SEARCHMSG	"1,2,3,4,5,6,7,8,9,10"
 
+static void trace_pipe_cb(const char *str, void *data)
+{
+	if (strstr(str, SEARCHMSG) != NULL)
+		(*(int *)data)++;
+}
+
 void serial_test_trace_vprintk(void)
 {
 	struct trace_vprintk_lskel__bss *bss;
-	int err = 0, iter = 0, found = 0;
 	struct trace_vprintk_lskel *skel;
-	char *buf = NULL;
-	FILE *fp = NULL;
-	size_t buflen;
+	int err = 0, found = 0;
 
 	skel = trace_vprintk_lskel__open_and_load();
 	if (!ASSERT_OK_PTR(skel, "trace_vprintk__open_and_load"))
@@ -28,16 +29,6 @@ void serial_test_trace_vprintk(void)
 	if (!ASSERT_OK(err, "trace_vprintk__attach"))
 		goto cleanup;
 
-	if (access(TRACEFS_PIPE, F_OK) == 0)
-		fp = fopen(TRACEFS_PIPE, "r");
-	else
-		fp = fopen(DEBUGFS_PIPE, "r");
-	if (!ASSERT_OK_PTR(fp, "fopen(TRACE_PIPE)"))
-		goto cleanup;
-
-	/* We do not want to wait forever if this test fails... */
-	fcntl(fileno(fp), F_SETFL, O_NONBLOCK);
-
 	/* wait for tracepoint to trigger */
 	usleep(1);
 	trace_vprintk_lskel__detach(skel);
@@ -49,14 +40,8 @@ void serial_test_trace_vprintk(void)
 		goto cleanup;
 
 	/* verify our search string is in the trace buffer */
-	while (getline(&buf, &buflen, fp) >= 0 || errno == EAGAIN) {
-		if (strstr(buf, SEARCHMSG) != NULL)
-			found++;
-		if (found == bss->trace_vprintk_ran)
-			break;
-		if (++iter > 1000)
-			break;
-	}
+	ASSERT_OK(read_trace_pipe_iter(trace_pipe_cb, &found, 1000),
+		 "read_trace_pipe_iter");
 
 	if (!ASSERT_EQ(found, bss->trace_vprintk_ran, "found"))
 		goto cleanup;
@@ -66,7 +51,4 @@ void serial_test_trace_vprintk(void)
 
 cleanup:
 	trace_vprintk_lskel__destroy(skel);
-	free(buf);
-	if (fp)
-		fclose(fp);
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c
index c4f9f306646e..c60db8beeb73 100644
--- a/tools/testing/selftests/bpf/prog_tests/verifier.c
+++ b/tools/testing/selftests/bpf/prog_tests/verifier.c
@@ -66,6 +66,7 @@
 #include "verifier_sdiv.skel.h"
 #include "verifier_search_pruning.skel.h"
 #include "verifier_sock.skel.h"
+#include "verifier_sock_addr.skel.h"
 #include "verifier_spill_fill.skel.h"
 #include "verifier_spin_lock.skel.h"
 #include "verifier_stack_ptr.skel.h"
@@ -181,6 +182,7 @@ void test_verifier_scalar_ids(void)           { RUN(verifier_scalar_ids); }
 void test_verifier_sdiv(void)                 { RUN(verifier_sdiv); }
 void test_verifier_search_pruning(void)       { RUN(verifier_search_pruning); }
 void test_verifier_sock(void)                 { RUN(verifier_sock); }
+void test_verifier_sock_addr(void)            { RUN(verifier_sock_addr); }
 void test_verifier_spill_fill(void)           { RUN(verifier_spill_fill); }
 void test_verifier_spin_lock(void)            { RUN(verifier_spin_lock); }
 void test_verifier_stack_ptr(void)            { RUN(verifier_stack_ptr); }
diff --git a/tools/testing/selftests/bpf/prog_tests/verifier_kfunc_prog_types.c b/tools/testing/selftests/bpf/prog_tests/verifier_kfunc_prog_types.c
new file mode 100644
index 000000000000..3918ecc2ee91
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/verifier_kfunc_prog_types.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#include <test_progs.h>
+
+#include "verifier_kfunc_prog_types.skel.h"
+
+void test_verifier_kfunc_prog_types(void)
+{
+	RUN_TESTS(verifier_kfunc_prog_types);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/wq.c b/tools/testing/selftests/bpf/prog_tests/wq.c
new file mode 100644
index 000000000000..99e438fe12ac
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/wq.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Benjamin Tissoires */
+#include <test_progs.h>
+#include "wq.skel.h"
+#include "wq_failures.skel.h"
+
+void serial_test_wq(void)
+{
+	struct wq *wq_skel = NULL;
+	int err, prog_fd;
+
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+
+	RUN_TESTS(wq);
+
+	/* re-run the success test to check if the timer was actually executed */
+
+	wq_skel = wq__open_and_load();
+	if (!ASSERT_OK_PTR(wq_skel, "wq_skel_load"))
+		return;
+
+	err = wq__attach(wq_skel);
+	if (!ASSERT_OK(err, "wq_attach"))
+		return;
+
+	prog_fd = bpf_program__fd(wq_skel->progs.test_syscall_array_sleepable);
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+	ASSERT_OK(err, "test_run");
+	ASSERT_EQ(topts.retval, 0, "test_run");
+
+	usleep(50); /* 10 usecs should be enough, but give it extra */
+
+	ASSERT_EQ(wq_skel->bss->ok_sleepable, (1 << 1), "ok_sleepable");
+	wq__destroy(wq_skel);
+}
+
+void serial_test_failures_wq(void)
+{
+	RUN_TESTS(wq_failures);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c b/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c
index 498d3bdaa4b0..bad0ea167be7 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_do_redirect.c
@@ -107,8 +107,8 @@ void test_xdp_do_redirect(void)
 			    .attach_point = BPF_TC_INGRESS);
 
 	memcpy(&data[sizeof(__u64)], &pkt_udp, sizeof(pkt_udp));
-	*((__u32 *)data) = 0x42; /* metadata test value */
-	*((__u32 *)data + 4) = 0;
+	((__u32 *)data)[0] = 0x42; /* metadata test value */
+	((__u32 *)data)[1] = 0;
 
 	skel = test_xdp_do_redirect__open();
 	if (!ASSERT_OK_PTR(skel, "skel"))
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c b/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
index 05edcf32f528..f76b5d67a3ee 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
@@ -384,6 +384,8 @@ void test_xdp_metadata(void)
 	SYS(out, "ip netns add " RX_NETNS_NAME);
 
 	tok = open_netns(TX_NETNS_NAME);
+	if (!ASSERT_OK_PTR(tok, "setns"))
+		goto out;
 	SYS(out, "ip link add numtxqueues 1 numrxqueues 1 " TX_NAME
 	    " type veth peer " RX_NAME " numtxqueues 1 numrxqueues 1");
 	SYS(out, "ip link set " RX_NAME " netns " RX_NETNS_NAME);
@@ -400,6 +402,8 @@ void test_xdp_metadata(void)
 	SYS(out, "ip -4 neigh add " RX_ADDR " lladdr " RX_MAC " dev " TX_NAME_VLAN);
 
 	switch_ns_to_rx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns rx"))
+		goto out;
 
 	SYS(out, "ip link set dev " RX_NAME " address " RX_MAC);
 	SYS(out, "ip link set dev " RX_NAME " up");
@@ -449,6 +453,8 @@ void test_xdp_metadata(void)
 		goto out;
 
 	switch_ns_to_tx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns tx"))
+		goto out;
 
 	/* Setup separate AF_XDP for TX interface nad send packet to the RX socket. */
 	tx_ifindex = if_nametoindex(TX_NAME);
@@ -461,6 +467,8 @@ void test_xdp_metadata(void)
 		goto out;
 
 	switch_ns_to_rx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns rx"))
+		goto out;
 
 	/* Verify packet sent from AF_XDP has proper metadata. */
 	if (!ASSERT_GE(verify_xsk_metadata(&rx_xsk, true), 0,
@@ -468,6 +476,8 @@ void test_xdp_metadata(void)
 		goto out;
 
 	switch_ns_to_tx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns tx"))
+		goto out;
 	complete_tx(&tx_xsk);
 
 	/* Now check metadata of packet, generated with network stack */
@@ -475,6 +485,8 @@ void test_xdp_metadata(void)
 		goto out;
 
 	switch_ns_to_rx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns rx"))
+		goto out;
 
 	if (!ASSERT_GE(verify_xsk_metadata(&rx_xsk, false), 0,
 		       "verify_xsk_metadata"))
@@ -498,6 +510,8 @@ void test_xdp_metadata(void)
 		goto out;
 
 	switch_ns_to_tx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns tx"))
+		goto out;
 
 	/* Send packet to trigger . */
 	if (!ASSERT_GE(generate_packet(&tx_xsk, AF_XDP_CONSUMER_PORT), 0,
@@ -505,6 +519,8 @@ void test_xdp_metadata(void)
 		goto out;
 
 	switch_ns_to_rx(&tok);
+	if (!ASSERT_OK_PTR(tok, "setns rx"))
+		goto out;
 
 	while (!retries--) {
 		if (bpf_obj2->bss->called)
diff --git a/tools/testing/selftests/bpf/progs/arena_atomics.c b/tools/testing/selftests/bpf/progs/arena_atomics.c
new file mode 100644
index 000000000000..55f10563208d
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/arena_atomics.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include <stdbool.h>
+#include "bpf_arena_common.h"
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARENA);
+	__uint(map_flags, BPF_F_MMAPABLE);
+	__uint(max_entries, 10); /* number of pages */
+#ifdef __TARGET_ARCH_arm64
+	__ulong(map_extra, 0x1ull << 32); /* start of mmap() region */
+#else
+	__ulong(map_extra, 0x1ull << 44); /* start of mmap() region */
+#endif
+} arena SEC(".maps");
+
+#if defined(ENABLE_ATOMICS_TESTS) && defined(__BPF_FEATURE_ADDR_SPACE_CAST)
+bool skip_tests __attribute((__section__(".data"))) = false;
+#else
+bool skip_tests = true;
+#endif
+
+__u32 pid = 0;
+
+#undef __arena
+#if defined(__BPF_FEATURE_ADDR_SPACE_CAST)
+#define __arena __attribute__((address_space(1)))
+#else
+#define __arena SEC(".addr_space.1")
+#endif
+
+__u64 __arena add64_value = 1;
+__u64 __arena add64_result = 0;
+__u32 __arena add32_value = 1;
+__u32 __arena add32_result = 0;
+__u64 __arena add_stack_value_copy = 0;
+__u64 __arena add_stack_result = 0;
+__u64 __arena add_noreturn_value = 1;
+
+SEC("raw_tp/sys_enter")
+int add(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+	__u64 add_stack_value = 1;
+
+	add64_result = __sync_fetch_and_add(&add64_value, 2);
+	add32_result = __sync_fetch_and_add(&add32_value, 2);
+	add_stack_result = __sync_fetch_and_add(&add_stack_value, 2);
+	add_stack_value_copy = add_stack_value;
+	__sync_fetch_and_add(&add_noreturn_value, 2);
+#endif
+
+	return 0;
+}
+
+__s64 __arena sub64_value = 1;
+__s64 __arena sub64_result = 0;
+__s32 __arena sub32_value = 1;
+__s32 __arena sub32_result = 0;
+__s64 __arena sub_stack_value_copy = 0;
+__s64 __arena sub_stack_result = 0;
+__s64 __arena sub_noreturn_value = 1;
+
+SEC("raw_tp/sys_enter")
+int sub(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+	__u64 sub_stack_value = 1;
+
+	sub64_result = __sync_fetch_and_sub(&sub64_value, 2);
+	sub32_result = __sync_fetch_and_sub(&sub32_value, 2);
+	sub_stack_result = __sync_fetch_and_sub(&sub_stack_value, 2);
+	sub_stack_value_copy = sub_stack_value;
+	__sync_fetch_and_sub(&sub_noreturn_value, 2);
+#endif
+
+	return 0;
+}
+
+__u64 __arena and64_value = (0x110ull << 32);
+__u32 __arena and32_value = 0x110;
+
+SEC("raw_tp/sys_enter")
+int and(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+
+	__sync_fetch_and_and(&and64_value, 0x011ull << 32);
+	__sync_fetch_and_and(&and32_value, 0x011);
+#endif
+
+	return 0;
+}
+
+__u32 __arena or32_value = 0x110;
+__u64 __arena or64_value = (0x110ull << 32);
+
+SEC("raw_tp/sys_enter")
+int or(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+	__sync_fetch_and_or(&or64_value, 0x011ull << 32);
+	__sync_fetch_and_or(&or32_value, 0x011);
+#endif
+
+	return 0;
+}
+
+__u64 __arena xor64_value = (0x110ull << 32);
+__u32 __arena xor32_value = 0x110;
+
+SEC("raw_tp/sys_enter")
+int xor(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+	__sync_fetch_and_xor(&xor64_value, 0x011ull << 32);
+	__sync_fetch_and_xor(&xor32_value, 0x011);
+#endif
+
+	return 0;
+}
+
+__u32 __arena cmpxchg32_value = 1;
+__u32 __arena cmpxchg32_result_fail = 0;
+__u32 __arena cmpxchg32_result_succeed = 0;
+__u64 __arena cmpxchg64_value = 1;
+__u64 __arena cmpxchg64_result_fail = 0;
+__u64 __arena cmpxchg64_result_succeed = 0;
+
+SEC("raw_tp/sys_enter")
+int cmpxchg(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+	cmpxchg64_result_fail = __sync_val_compare_and_swap(&cmpxchg64_value, 0, 3);
+	cmpxchg64_result_succeed = __sync_val_compare_and_swap(&cmpxchg64_value, 1, 2);
+
+	cmpxchg32_result_fail = __sync_val_compare_and_swap(&cmpxchg32_value, 0, 3);
+	cmpxchg32_result_succeed = __sync_val_compare_and_swap(&cmpxchg32_value, 1, 2);
+#endif
+
+	return 0;
+}
+
+__u64 __arena xchg64_value = 1;
+__u64 __arena xchg64_result = 0;
+__u32 __arena xchg32_value = 1;
+__u32 __arena xchg32_result = 0;
+
+SEC("raw_tp/sys_enter")
+int xchg(const void *ctx)
+{
+	if (pid != (bpf_get_current_pid_tgid() >> 32))
+		return 0;
+#ifdef ENABLE_ATOMICS_TESTS
+	__u64 val64 = 2;
+	__u32 val32 = 2;
+
+	xchg64_result = __sync_lock_test_and_set(&xchg64_value, val64);
+	xchg32_result = __sync_lock_test_and_set(&xchg32_value, val32);
+#endif
+
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/progs/arena_list.c b/tools/testing/selftests/bpf/progs/arena_list.c
index c0422c58cee2..93bd0600eba0 100644
--- a/tools/testing/selftests/bpf/progs/arena_list.c
+++ b/tools/testing/selftests/bpf/progs/arena_list.c
@@ -49,7 +49,7 @@ int arena_list_add(void *ctx)
 
 	list_head = &global_head;
 
-	for (i = zero; i < cnt; cond_break, i++) {
+	for (i = zero; i < cnt && can_loop; i++) {
 		struct elem __arena *n = bpf_alloc(sizeof(*n));
 
 		test_val++;
diff --git a/tools/testing/selftests/bpf/progs/bench_local_storage_create.c b/tools/testing/selftests/bpf/progs/bench_local_storage_create.c
index e4bfbba6c193..c8ec0d0368e4 100644
--- a/tools/testing/selftests/bpf/progs/bench_local_storage_create.c
+++ b/tools/testing/selftests/bpf/progs/bench_local_storage_create.c
@@ -61,14 +61,15 @@ SEC("lsm.s/socket_post_create")
 int BPF_PROG(socket_post_create, struct socket *sock, int family, int type,
 	     int protocol, int kern)
 {
+	struct sock *sk = sock->sk;
 	struct storage *stg;
 	__u32 pid;
 
 	pid = bpf_get_current_pid_tgid() >> 32;
-	if (pid != bench_pid)
+	if (pid != bench_pid || !sk)
 		return 0;
 
-	stg = bpf_sk_storage_get(&sk_storage_map, sock->sk, NULL,
+	stg = bpf_sk_storage_get(&sk_storage_map, sk, NULL,
 				 BPF_LOCAL_STORAGE_GET_F_CREATE);
 
 	if (stg)
diff --git a/tools/testing/selftests/bpf/progs/bind4_prog.c b/tools/testing/selftests/bpf/progs/bind4_prog.c
index a487f60b73ac..b7ddf8ec4ee8 100644
--- a/tools/testing/selftests/bpf/progs/bind4_prog.c
+++ b/tools/testing/selftests/bpf/progs/bind4_prog.c
@@ -12,6 +12,8 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
 
+#include "bind_prog.h"
+
 #define SERV4_IP		0xc0a801feU /* 192.168.1.254 */
 #define SERV4_PORT		4040
 #define SERV4_REWRITE_IP	0x7f000001U /* 127.0.0.1 */
@@ -118,23 +120,23 @@ int bind_v4_prog(struct bpf_sock_addr *ctx)
 
 	// u8 narrow loads:
 	user_ip4 = 0;
-	user_ip4 |= ((volatile __u8 *)&ctx->user_ip4)[0] << 0;
-	user_ip4 |= ((volatile __u8 *)&ctx->user_ip4)[1] << 8;
-	user_ip4 |= ((volatile __u8 *)&ctx->user_ip4)[2] << 16;
-	user_ip4 |= ((volatile __u8 *)&ctx->user_ip4)[3] << 24;
+	user_ip4 |= load_byte(ctx->user_ip4, 0, sizeof(user_ip4));
+	user_ip4 |= load_byte(ctx->user_ip4, 1, sizeof(user_ip4));
+	user_ip4 |= load_byte(ctx->user_ip4, 2, sizeof(user_ip4));
+	user_ip4 |= load_byte(ctx->user_ip4, 3, sizeof(user_ip4));
 	if (ctx->user_ip4 != user_ip4)
 		return 0;
 
 	user_port = 0;
-	user_port |= ((volatile __u8 *)&ctx->user_port)[0] << 0;
-	user_port |= ((volatile __u8 *)&ctx->user_port)[1] << 8;
+	user_port |= load_byte(ctx->user_port, 0, sizeof(user_port));
+	user_port |= load_byte(ctx->user_port, 1, sizeof(user_port));
 	if (ctx->user_port != user_port)
 		return 0;
 
 	// u16 narrow loads:
 	user_ip4 = 0;
-	user_ip4 |= ((volatile __u16 *)&ctx->user_ip4)[0] << 0;
-	user_ip4 |= ((volatile __u16 *)&ctx->user_ip4)[1] << 16;
+	user_ip4 |= load_word(ctx->user_ip4, 0, sizeof(user_ip4));
+	user_ip4 |= load_word(ctx->user_ip4, 1, sizeof(user_ip4));
 	if (ctx->user_ip4 != user_ip4)
 		return 0;
 
@@ -156,4 +158,10 @@ int bind_v4_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/bind4")
+int bind_v4_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/bind6_prog.c b/tools/testing/selftests/bpf/progs/bind6_prog.c
index d62cd9e9cf0e..501c3fc11d35 100644
--- a/tools/testing/selftests/bpf/progs/bind6_prog.c
+++ b/tools/testing/selftests/bpf/progs/bind6_prog.c
@@ -12,6 +12,8 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
 
+#include "bind_prog.h"
+
 #define SERV6_IP_0		0xfaceb00c /* face:b00c:1234:5678::abcd */
 #define SERV6_IP_1		0x12345678
 #define SERV6_IP_2		0x00000000
@@ -129,25 +131,25 @@ int bind_v6_prog(struct bpf_sock_addr *ctx)
 	// u8 narrow loads:
 	for (i = 0; i < 4; i++) {
 		user_ip6 = 0;
-		user_ip6 |= ((volatile __u8 *)&ctx->user_ip6[i])[0] << 0;
-		user_ip6 |= ((volatile __u8 *)&ctx->user_ip6[i])[1] << 8;
-		user_ip6 |= ((volatile __u8 *)&ctx->user_ip6[i])[2] << 16;
-		user_ip6 |= ((volatile __u8 *)&ctx->user_ip6[i])[3] << 24;
+		user_ip6 |= load_byte(ctx->user_ip6[i], 0, sizeof(user_ip6));
+		user_ip6 |= load_byte(ctx->user_ip6[i], 1, sizeof(user_ip6));
+		user_ip6 |= load_byte(ctx->user_ip6[i], 2, sizeof(user_ip6));
+		user_ip6 |= load_byte(ctx->user_ip6[i], 3, sizeof(user_ip6));
 		if (ctx->user_ip6[i] != user_ip6)
 			return 0;
 	}
 
 	user_port = 0;
-	user_port |= ((volatile __u8 *)&ctx->user_port)[0] << 0;
-	user_port |= ((volatile __u8 *)&ctx->user_port)[1] << 8;
+	user_port |= load_byte(ctx->user_port, 0, sizeof(user_port));
+	user_port |= load_byte(ctx->user_port, 1, sizeof(user_port));
 	if (ctx->user_port != user_port)
 		return 0;
 
 	// u16 narrow loads:
 	for (i = 0; i < 4; i++) {
 		user_ip6 = 0;
-		user_ip6 |= ((volatile __u16 *)&ctx->user_ip6[i])[0] << 0;
-		user_ip6 |= ((volatile __u16 *)&ctx->user_ip6[i])[1] << 16;
+		user_ip6 |= load_word(ctx->user_ip6[i], 0, sizeof(user_ip6));
+		user_ip6 |= load_word(ctx->user_ip6[i], 1, sizeof(user_ip6));
 		if (ctx->user_ip6[i] != user_ip6)
 			return 0;
 	}
@@ -173,4 +175,10 @@ int bind_v6_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/bind6")
+int bind_v6_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/bind_prog.h b/tools/testing/selftests/bpf/progs/bind_prog.h
new file mode 100644
index 000000000000..e830caa940c3
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/bind_prog.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __BIND_PROG_H__
+#define __BIND_PROG_H__
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define load_byte(src, b, s) \
+	(((volatile __u8 *)&(src))[b] << 8 * b)
+#define load_word(src, w, s) \
+	(((volatile __u16 *)&(src))[w] << 16 * w)
+#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define load_byte(src, b, s) \
+	(((volatile __u8 *)&(src))[(b) + (sizeof(src) - (s))] << 8 * ((s) - (b) - 1))
+#define load_word(src, w, s) \
+	(((volatile __u16 *)&(src))[w] << 16 * (((s) / 2) - (w) - 1))
+#else
+# error "Fix your compiler's __BYTE_ORDER__?!"
+#endif
+
+#endif
diff --git a/tools/testing/selftests/bpf/progs/bpf_cc_cubic.c b/tools/testing/selftests/bpf/progs/bpf_cc_cubic.c
new file mode 100644
index 000000000000..1654a530aa3d
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/bpf_cc_cubic.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* Highlights:
+ * 1. The major difference between this bpf program and tcp_cubic.c
+ *    is that this bpf program relies on `cong_control` rather than
+ *    `cong_avoid` in the struct tcp_congestion_ops.
+ * 2. Logic such as tcp_cwnd_reduction, tcp_cong_avoid, and
+ *    tcp_update_pacing_rate is bypassed when `cong_control` is
+ *    defined, so moving these logic to `cong_control`.
+ * 3. WARNING: This bpf program is NOT the same as tcp_cubic.c.
+ *    The main purpose is to show use cases of the arguments in
+ *    `cong_control`. For simplicity's sake, it reuses tcp cubic's
+ *    kernel functions.
+ */
+
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+#define USEC_PER_SEC 1000000UL
+#define TCP_PACING_SS_RATIO (200)
+#define TCP_PACING_CA_RATIO (120)
+#define TCP_REORDERING (12)
+
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#define max(a, b) ((a) > (b) ? (a) : (b))
+#define after(seq2, seq1) before(seq1, seq2)
+
+extern void cubictcp_init(struct sock *sk) __ksym;
+extern void cubictcp_cwnd_event(struct sock *sk, enum tcp_ca_event event) __ksym;
+extern __u32 cubictcp_recalc_ssthresh(struct sock *sk) __ksym;
+extern void cubictcp_state(struct sock *sk, __u8 new_state) __ksym;
+extern __u32 tcp_reno_undo_cwnd(struct sock *sk) __ksym;
+extern void cubictcp_acked(struct sock *sk, const struct ack_sample *sample) __ksym;
+extern void cubictcp_cong_avoid(struct sock *sk, __u32 ack, __u32 acked) __ksym;
+
+static bool before(__u32 seq1, __u32 seq2)
+{
+	return (__s32)(seq1-seq2) < 0;
+}
+
+static __u64 div64_u64(__u64 dividend, __u64 divisor)
+{
+	return dividend / divisor;
+}
+
+static void tcp_update_pacing_rate(struct sock *sk)
+{
+	const struct tcp_sock *tp = tcp_sk(sk);
+	__u64 rate;
+
+	/* set sk_pacing_rate to 200 % of current rate (mss * cwnd / srtt) */
+	rate = (__u64)tp->mss_cache * ((USEC_PER_SEC / 100) << 3);
+
+	/* current rate is (cwnd * mss) / srtt
+	 * In Slow Start [1], set sk_pacing_rate to 200 % the current rate.
+	 * In Congestion Avoidance phase, set it to 120 % the current rate.
+	 *
+	 * [1] : Normal Slow Start condition is (tp->snd_cwnd < tp->snd_ssthresh)
+	 *	 If snd_cwnd >= (tp->snd_ssthresh / 2), we are approaching
+	 *	 end of slow start and should slow down.
+	 */
+	if (tp->snd_cwnd < tp->snd_ssthresh / 2)
+		rate *= TCP_PACING_SS_RATIO;
+	else
+		rate *= TCP_PACING_CA_RATIO;
+
+	rate *= max(tp->snd_cwnd, tp->packets_out);
+
+	if (tp->srtt_us)
+		rate = div64_u64(rate, (__u64)tp->srtt_us);
+
+	sk->sk_pacing_rate = min(rate, sk->sk_max_pacing_rate);
+}
+
+static void tcp_cwnd_reduction(struct sock *sk, int newly_acked_sacked,
+			       int newly_lost, int flag)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+	int sndcnt = 0;
+	__u32 pkts_in_flight = tp->packets_out - (tp->sacked_out + tp->lost_out) + tp->retrans_out;
+	int delta = tp->snd_ssthresh - pkts_in_flight;
+
+	if (newly_acked_sacked <= 0 || !tp->prior_cwnd)
+		return;
+
+	__u32 prr_delivered = tp->prr_delivered + newly_acked_sacked;
+
+	if (delta < 0) {
+		__u64 dividend =
+			(__u64)tp->snd_ssthresh * prr_delivered + tp->prior_cwnd - 1;
+		sndcnt = (__u32)div64_u64(dividend, (__u64)tp->prior_cwnd) - tp->prr_out;
+	} else {
+		sndcnt = max(prr_delivered - tp->prr_out, newly_acked_sacked);
+		if (flag & FLAG_SND_UNA_ADVANCED && !newly_lost)
+			sndcnt++;
+		sndcnt = min(delta, sndcnt);
+	}
+	/* Force a fast retransmit upon entering fast recovery */
+	sndcnt = max(sndcnt, (tp->prr_out ? 0 : 1));
+	tp->snd_cwnd = pkts_in_flight + sndcnt;
+}
+
+/* Decide wheather to run the increase function of congestion control. */
+static bool tcp_may_raise_cwnd(const struct sock *sk, const int flag)
+{
+	if (tcp_sk(sk)->reordering > TCP_REORDERING)
+		return flag & FLAG_FORWARD_PROGRESS;
+
+	return flag & FLAG_DATA_ACKED;
+}
+
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_init, struct sock *sk)
+{
+	cubictcp_init(sk);
+}
+
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_cwnd_event, struct sock *sk, enum tcp_ca_event event)
+{
+	cubictcp_cwnd_event(sk, event);
+}
+
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_cong_control, struct sock *sk, __u32 ack, int flag,
+	      const struct rate_sample *rs)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (((1<<TCP_CA_CWR) | (1<<TCP_CA_Recovery)) &
+			(1 << inet_csk(sk)->icsk_ca_state)) {
+		/* Reduce cwnd if state mandates */
+		tcp_cwnd_reduction(sk, rs->acked_sacked, rs->losses, flag);
+
+		if (!before(tp->snd_una, tp->high_seq)) {
+			/* Reset cwnd to ssthresh in CWR or Recovery (unless it's undone) */
+			if (tp->snd_ssthresh < TCP_INFINITE_SSTHRESH &&
+					inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) {
+				tp->snd_cwnd = tp->snd_ssthresh;
+				tp->snd_cwnd_stamp = tcp_jiffies32;
+			}
+		}
+	} else if (tcp_may_raise_cwnd(sk, flag)) {
+		/* Advance cwnd if state allows */
+		cubictcp_cong_avoid(sk, ack, rs->acked_sacked);
+		tp->snd_cwnd_stamp = tcp_jiffies32;
+	}
+
+	tcp_update_pacing_rate(sk);
+}
+
+SEC("struct_ops")
+__u32 BPF_PROG(bpf_cubic_recalc_ssthresh, struct sock *sk)
+{
+	return cubictcp_recalc_ssthresh(sk);
+}
+
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_state, struct sock *sk, __u8 new_state)
+{
+	cubictcp_state(sk, new_state);
+}
+
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_acked, struct sock *sk, const struct ack_sample *sample)
+{
+	cubictcp_acked(sk, sample);
+}
+
+SEC("struct_ops")
+__u32 BPF_PROG(bpf_cubic_undo_cwnd, struct sock *sk)
+{
+	return tcp_reno_undo_cwnd(sk);
+}
+
+SEC(".struct_ops")
+struct tcp_congestion_ops cc_cubic = {
+	.init		= (void *)bpf_cubic_init,
+	.ssthresh	= (void *)bpf_cubic_recalc_ssthresh,
+	.cong_control	= (void *)bpf_cubic_cong_control,
+	.set_state	= (void *)bpf_cubic_state,
+	.undo_cwnd	= (void *)bpf_cubic_undo_cwnd,
+	.cwnd_event	= (void *)bpf_cubic_cwnd_event,
+	.pkts_acked     = (void *)bpf_cubic_acked,
+	.name		= "bpf_cc_cubic",
+};
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/bpf_cubic.c b/tools/testing/selftests/bpf/progs/bpf_cubic.c
index c997e3e3d3fb..d665b8a15cc4 100644
--- a/tools/testing/selftests/bpf/progs/bpf_cubic.c
+++ b/tools/testing/selftests/bpf/progs/bpf_cubic.c
@@ -14,14 +14,22 @@
  *    "ca->ack_cnt / delta" operation.
  */
 
-#include <linux/bpf.h>
-#include <linux/stddef.h>
-#include <linux/tcp.h>
-#include "bpf_tcp_helpers.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_tracing.h>
 
 char _license[] SEC("license") = "GPL";
 
 #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#define max(a, b) ((a) > (b) ? (a) : (b))
+static bool before(__u32 seq1, __u32 seq2)
+{
+	return (__s32)(seq1-seq2) < 0;
+}
+#define after(seq2, seq1) 	before(seq1, seq2)
+
+extern __u32 tcp_slow_start(struct tcp_sock *tp, __u32 acked) __ksym;
+extern void tcp_cong_avoid_ai(struct tcp_sock *tp, __u32 w, __u32 acked) __ksym;
 
 #define BICTCP_BETA_SCALE    1024	/* Scale factor beta calculation
 					 * max_cwnd = snd_cwnd * beta
@@ -70,7 +78,7 @@ static const __u64 cube_factor = (__u64)(1ull << (10+3*BICTCP_HZ))
 				/ (bic_scale * 10);
 
 /* BIC TCP Parameters */
-struct bictcp {
+struct bpf_bictcp {
 	__u32	cnt;		/* increase cwnd by 1 after ACKs */
 	__u32	last_max_cwnd;	/* last maximum snd_cwnd */
 	__u32	last_cwnd;	/* the last snd_cwnd */
@@ -91,7 +99,7 @@ struct bictcp {
 	__u32	curr_rtt;	/* the minimum rtt of current round */
 };
 
-static inline void bictcp_reset(struct bictcp *ca)
+static void bictcp_reset(struct bpf_bictcp *ca)
 {
 	ca->cnt = 0;
 	ca->last_max_cwnd = 0;
@@ -112,7 +120,7 @@ extern unsigned long CONFIG_HZ __kconfig;
 #define USEC_PER_SEC	1000000UL
 #define USEC_PER_JIFFY	(USEC_PER_SEC / HZ)
 
-static __always_inline __u64 div64_u64(__u64 dividend, __u64 divisor)
+static __u64 div64_u64(__u64 dividend, __u64 divisor)
 {
 	return dividend / divisor;
 }
@@ -120,7 +128,7 @@ static __always_inline __u64 div64_u64(__u64 dividend, __u64 divisor)
 #define div64_ul div64_u64
 
 #define BITS_PER_U64 (sizeof(__u64) * 8)
-static __always_inline int fls64(__u64 x)
+static int fls64(__u64 x)
 {
 	int num = BITS_PER_U64 - 1;
 
@@ -153,15 +161,15 @@ static __always_inline int fls64(__u64 x)
 	return num + 1;
 }
 
-static __always_inline __u32 bictcp_clock_us(const struct sock *sk)
+static __u32 bictcp_clock_us(const struct sock *sk)
 {
 	return tcp_sk(sk)->tcp_mstamp;
 }
 
-static __always_inline void bictcp_hystart_reset(struct sock *sk)
+static void bictcp_hystart_reset(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
-	struct bictcp *ca = inet_csk_ca(sk);
+	struct bpf_bictcp *ca = inet_csk_ca(sk);
 
 	ca->round_start = ca->last_ack = bictcp_clock_us(sk);
 	ca->end_seq = tp->snd_nxt;
@@ -169,11 +177,10 @@ static __always_inline void bictcp_hystart_reset(struct sock *sk)
 	ca->sample_cnt = 0;
 }
 
-/* "struct_ops/" prefix is a requirement */
-SEC("struct_ops/bpf_cubic_init")
+SEC("struct_ops")
 void BPF_PROG(bpf_cubic_init, struct sock *sk)
 {
-	struct bictcp *ca = inet_csk_ca(sk);
+	struct bpf_bictcp *ca = inet_csk_ca(sk);
 
 	bictcp_reset(ca);
 
@@ -184,12 +191,11 @@ void BPF_PROG(bpf_cubic_init, struct sock *sk)
 		tcp_sk(sk)->snd_ssthresh = initial_ssthresh;
 }
 
-/* "struct_ops" prefix is a requirement */
-SEC("struct_ops/bpf_cubic_cwnd_event")
+SEC("struct_ops")
 void BPF_PROG(bpf_cubic_cwnd_event, struct sock *sk, enum tcp_ca_event event)
 {
 	if (event == CA_EVENT_TX_START) {
-		struct bictcp *ca = inet_csk_ca(sk);
+		struct bpf_bictcp *ca = inet_csk_ca(sk);
 		__u32 now = tcp_jiffies32;
 		__s32 delta;
 
@@ -230,7 +236,7 @@ static const __u8 v[] = {
  * Newton-Raphson iteration.
  * Avg err ~= 0.195%
  */
-static __always_inline __u32 cubic_root(__u64 a)
+static __u32 cubic_root(__u64 a)
 {
 	__u32 x, b, shift;
 
@@ -263,8 +269,7 @@ static __always_inline __u32 cubic_root(__u64 a)
 /*
  * Compute congestion window to use.
  */
-static __always_inline void bictcp_update(struct bictcp *ca, __u32 cwnd,
-					  __u32 acked)
+static void bictcp_update(struct bpf_bictcp *ca, __u32 cwnd, __u32 acked)
 {
 	__u32 delta, bic_target, max_cnt;
 	__u64 offs, t;
@@ -377,11 +382,11 @@ tcp_friendliness:
 	ca->cnt = max(ca->cnt, 2U);
 }
 
-/* Or simply use the BPF_STRUCT_OPS to avoid the SEC boiler plate. */
-void BPF_STRUCT_OPS(bpf_cubic_cong_avoid, struct sock *sk, __u32 ack, __u32 acked)
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_cong_avoid, struct sock *sk, __u32 ack, __u32 acked)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
-	struct bictcp *ca = inet_csk_ca(sk);
+	struct bpf_bictcp *ca = inet_csk_ca(sk);
 
 	if (!tcp_is_cwnd_limited(sk))
 		return;
@@ -397,10 +402,11 @@ void BPF_STRUCT_OPS(bpf_cubic_cong_avoid, struct sock *sk, __u32 ack, __u32 acke
 	tcp_cong_avoid_ai(tp, ca->cnt, acked);
 }
 
-__u32 BPF_STRUCT_OPS(bpf_cubic_recalc_ssthresh, struct sock *sk)
+SEC("struct_ops")
+__u32 BPF_PROG(bpf_cubic_recalc_ssthresh, struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
-	struct bictcp *ca = inet_csk_ca(sk);
+	struct bpf_bictcp *ca = inet_csk_ca(sk);
 
 	ca->epoch_start = 0;	/* end of epoch */
 
@@ -414,7 +420,8 @@ __u32 BPF_STRUCT_OPS(bpf_cubic_recalc_ssthresh, struct sock *sk)
 	return max((tp->snd_cwnd * beta) / BICTCP_BETA_SCALE, 2U);
 }
 
-void BPF_STRUCT_OPS(bpf_cubic_state, struct sock *sk, __u8 new_state)
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_state, struct sock *sk, __u8 new_state)
 {
 	if (new_state == TCP_CA_Loss) {
 		bictcp_reset(inet_csk_ca(sk));
@@ -433,7 +440,7 @@ void BPF_STRUCT_OPS(bpf_cubic_state, struct sock *sk, __u8 new_state)
  * We apply another 100% factor because @rate is doubled at this point.
  * We cap the cushion to 1ms.
  */
-static __always_inline __u32 hystart_ack_delay(struct sock *sk)
+static __u32 hystart_ack_delay(struct sock *sk)
 {
 	unsigned long rate;
 
@@ -444,10 +451,10 @@ static __always_inline __u32 hystart_ack_delay(struct sock *sk)
 		   div64_ul((__u64)GSO_MAX_SIZE * 4 * USEC_PER_SEC, rate));
 }
 
-static __always_inline void hystart_update(struct sock *sk, __u32 delay)
+static void hystart_update(struct sock *sk, __u32 delay)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
-	struct bictcp *ca = inet_csk_ca(sk);
+	struct bpf_bictcp *ca = inet_csk_ca(sk);
 	__u32 threshold;
 
 	if (hystart_detect & HYSTART_ACK_TRAIN) {
@@ -492,11 +499,11 @@ static __always_inline void hystart_update(struct sock *sk, __u32 delay)
 
 int bpf_cubic_acked_called = 0;
 
-void BPF_STRUCT_OPS(bpf_cubic_acked, struct sock *sk,
-		    const struct ack_sample *sample)
+SEC("struct_ops")
+void BPF_PROG(bpf_cubic_acked, struct sock *sk, const struct ack_sample *sample)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
-	struct bictcp *ca = inet_csk_ca(sk);
+	struct bpf_bictcp *ca = inet_csk_ca(sk);
 	__u32 delay;
 
 	bpf_cubic_acked_called = 1;
@@ -524,7 +531,8 @@ void BPF_STRUCT_OPS(bpf_cubic_acked, struct sock *sk,
 
 extern __u32 tcp_reno_undo_cwnd(struct sock *sk) __ksym;
 
-__u32 BPF_STRUCT_OPS(bpf_cubic_undo_cwnd, struct sock *sk)
+SEC("struct_ops")
+__u32 BPF_PROG(bpf_cubic_undo_cwnd, struct sock *sk)
 {
 	return tcp_reno_undo_cwnd(sk);
 }
diff --git a/tools/testing/selftests/bpf/progs/bpf_dctcp.c b/tools/testing/selftests/bpf/progs/bpf_dctcp.c
index 460682759aed..3c9ffe340312 100644
--- a/tools/testing/selftests/bpf/progs/bpf_dctcp.c
+++ b/tools/testing/selftests/bpf/progs/bpf_dctcp.c
@@ -6,15 +6,23 @@
  * the kernel BPF logic.
  */
 
-#include <stddef.h>
-#include <linux/bpf.h>
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/tcp.h>
-#include <errno.h>
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
-#include "bpf_tcp_helpers.h"
+
+#ifndef EBUSY
+#define EBUSY 16
+#endif
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#define max(a, b) ((a) > (b) ? (a) : (b))
+#define min_not_zero(x, y) ({			\
+	typeof(x) __x = (x);			\
+	typeof(y) __y = (y);			\
+	__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
+static bool before(__u32 seq1, __u32 seq2)
+{
+	return (__s32)(seq1-seq2) < 0;
+}
 
 char _license[] SEC("license") = "GPL";
 
@@ -35,7 +43,7 @@ struct {
 
 #define DCTCP_MAX_ALPHA	1024U
 
-struct dctcp {
+struct bpf_dctcp {
 	__u32 old_delivered;
 	__u32 old_delivered_ce;
 	__u32 prior_rcv_nxt;
@@ -48,8 +56,7 @@ struct dctcp {
 static unsigned int dctcp_shift_g = 4; /* g = 1/2^4 */
 static unsigned int dctcp_alpha_on_init = DCTCP_MAX_ALPHA;
 
-static __always_inline void dctcp_reset(const struct tcp_sock *tp,
-					struct dctcp *ca)
+static void dctcp_reset(const struct tcp_sock *tp, struct bpf_dctcp *ca)
 {
 	ca->next_seq = tp->snd_nxt;
 
@@ -57,11 +64,11 @@ static __always_inline void dctcp_reset(const struct tcp_sock *tp,
 	ca->old_delivered_ce = tp->delivered_ce;
 }
 
-SEC("struct_ops/dctcp_init")
+SEC("struct_ops")
 void BPF_PROG(dctcp_init, struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
-	struct dctcp *ca = inet_csk_ca(sk);
+	struct bpf_dctcp *ca = inet_csk_ca(sk);
 	int *stg;
 
 	if (!(tp->ecn_flags & TCP_ECN_OK) && fallback[0]) {
@@ -104,21 +111,21 @@ void BPF_PROG(dctcp_init, struct sock *sk)
 	dctcp_reset(tp, ca);
 }
 
-SEC("struct_ops/dctcp_ssthresh")
+SEC("struct_ops")
 __u32 BPF_PROG(dctcp_ssthresh, struct sock *sk)
 {
-	struct dctcp *ca = inet_csk_ca(sk);
+	struct bpf_dctcp *ca = inet_csk_ca(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	ca->loss_cwnd = tp->snd_cwnd;
 	return max(tp->snd_cwnd - ((tp->snd_cwnd * ca->dctcp_alpha) >> 11U), 2U);
 }
 
-SEC("struct_ops/dctcp_update_alpha")
+SEC("struct_ops")
 void BPF_PROG(dctcp_update_alpha, struct sock *sk, __u32 flags)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
-	struct dctcp *ca = inet_csk_ca(sk);
+	struct bpf_dctcp *ca = inet_csk_ca(sk);
 
 	/* Expired RTT */
 	if (!before(tp->snd_una, ca->next_seq)) {
@@ -144,16 +151,16 @@ void BPF_PROG(dctcp_update_alpha, struct sock *sk, __u32 flags)
 	}
 }
 
-static __always_inline void dctcp_react_to_loss(struct sock *sk)
+static void dctcp_react_to_loss(struct sock *sk)
 {
-	struct dctcp *ca = inet_csk_ca(sk);
+	struct bpf_dctcp *ca = inet_csk_ca(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	ca->loss_cwnd = tp->snd_cwnd;
 	tp->snd_ssthresh = max(tp->snd_cwnd >> 1U, 2U);
 }
 
-SEC("struct_ops/dctcp_state")
+SEC("struct_ops")
 void BPF_PROG(dctcp_state, struct sock *sk, __u8 new_state)
 {
 	if (new_state == TCP_CA_Recovery &&
@@ -164,7 +171,7 @@ void BPF_PROG(dctcp_state, struct sock *sk, __u8 new_state)
 	 */
 }
 
-static __always_inline void dctcp_ece_ack_cwr(struct sock *sk, __u32 ce_state)
+static void dctcp_ece_ack_cwr(struct sock *sk, __u32 ce_state)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 
@@ -179,9 +186,8 @@ static __always_inline void dctcp_ece_ack_cwr(struct sock *sk, __u32 ce_state)
  * S:	0 <- last pkt was non-CE
  *	1 <- last pkt was CE
  */
-static __always_inline
-void dctcp_ece_ack_update(struct sock *sk, enum tcp_ca_event evt,
-			  __u32 *prior_rcv_nxt, __u32 *ce_state)
+static void dctcp_ece_ack_update(struct sock *sk, enum tcp_ca_event evt,
+				 __u32 *prior_rcv_nxt, __u32 *ce_state)
 {
 	__u32 new_ce_state = (evt == CA_EVENT_ECN_IS_CE) ? 1 : 0;
 
@@ -201,10 +207,10 @@ void dctcp_ece_ack_update(struct sock *sk, enum tcp_ca_event evt,
 	dctcp_ece_ack_cwr(sk, new_ce_state);
 }
 
-SEC("struct_ops/dctcp_cwnd_event")
+SEC("struct_ops")
 void BPF_PROG(dctcp_cwnd_event, struct sock *sk, enum tcp_ca_event ev)
 {
-	struct dctcp *ca = inet_csk_ca(sk);
+	struct bpf_dctcp *ca = inet_csk_ca(sk);
 
 	switch (ev) {
 	case CA_EVENT_ECN_IS_CE:
@@ -220,17 +226,17 @@ void BPF_PROG(dctcp_cwnd_event, struct sock *sk, enum tcp_ca_event ev)
 	}
 }
 
-SEC("struct_ops/dctcp_cwnd_undo")
+SEC("struct_ops")
 __u32 BPF_PROG(dctcp_cwnd_undo, struct sock *sk)
 {
-	const struct dctcp *ca = inet_csk_ca(sk);
+	const struct bpf_dctcp *ca = inet_csk_ca(sk);
 
 	return max(tcp_sk(sk)->snd_cwnd, ca->loss_cwnd);
 }
 
 extern void tcp_reno_cong_avoid(struct sock *sk, __u32 ack, __u32 acked) __ksym;
 
-SEC("struct_ops/dctcp_reno_cong_avoid")
+SEC("struct_ops")
 void BPF_PROG(dctcp_cong_avoid, struct sock *sk, __u32 ack, __u32 acked)
 {
 	tcp_reno_cong_avoid(sk, ack, acked);
diff --git a/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c b/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c
index d836f7c372f0..c91763f248b2 100644
--- a/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c
+++ b/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c
@@ -1,19 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright (c) 2021 Facebook */
 
-#include <stddef.h>
-#include <linux/bpf.h>
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/tcp.h>
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
-#include "bpf_tcp_helpers.h"
 
 char _license[] SEC("license") = "GPL";
 const char cubic[] = "cubic";
 
-void BPF_STRUCT_OPS(dctcp_nouse_release, struct sock *sk)
+SEC("struct_ops")
+void BPF_PROG(dctcp_nouse_release, struct sock *sk)
 {
 	bpf_setsockopt(sk, SOL_TCP, TCP_CONGESTION,
 		       (void *)cubic, sizeof(cubic));
diff --git a/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c b/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c
index 2ecd833dcd41..8a7a4c1b54e8 100644
--- a/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c
+++ b/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c
@@ -1,14 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include <linux/bpf.h>
-#include <linux/types.h>
-#include <bpf/bpf_helpers.h>
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_tracing.h>
-#include "bpf_tcp_helpers.h"
 
 char _license[] SEC("license") = "X";
 
-void BPF_STRUCT_OPS(nogpltcp_init, struct sock *sk)
+SEC("struct_ops")
+void BPF_PROG(nogpltcp_init, struct sock *sk)
 {
 }
 
diff --git a/tools/testing/selftests/bpf/progs/bpf_tracing_net.h b/tools/testing/selftests/bpf/progs/bpf_tracing_net.h
index 7001965d1cc3..59843b430f76 100644
--- a/tools/testing/selftests/bpf/progs/bpf_tracing_net.h
+++ b/tools/testing/selftests/bpf/progs/bpf_tracing_net.h
@@ -2,6 +2,9 @@
 #ifndef __BPF_TRACING_NET_H__
 #define __BPF_TRACING_NET_H__
 
+#include <vmlinux.h>
+#include <bpf/bpf_core_read.h>
+
 #define AF_INET			2
 #define AF_INET6		10
 
@@ -22,6 +25,7 @@
 
 #define IP_TOS			1
 
+#define SOL_IPV6		41
 #define IPV6_TCLASS		67
 #define IPV6_AUTOFLOWLABEL	70
 
@@ -46,6 +50,13 @@
 #define TCP_CA_NAME_MAX		16
 #define TCP_NAGLE_OFF		1
 
+#define TCP_ECN_OK              1
+#define TCP_ECN_QUEUE_CWR       2
+#define TCP_ECN_DEMAND_CWR      4
+#define TCP_ECN_SEEN            8
+
+#define TCP_CONG_NEEDS_ECN     0x2
+
 #define ICSK_TIME_RETRANS	1
 #define ICSK_TIME_PROBE0	3
 #define ICSK_TIME_LOSS_PROBE	5
@@ -80,6 +91,14 @@
 #define TCP_INFINITE_SSTHRESH	0x7fffffff
 #define TCP_PINGPONG_THRESH	3
 
+#define FLAG_DATA_ACKED 0x04 /* This ACK acknowledged new data.		*/
+#define FLAG_SYN_ACKED 0x10 /* This ACK acknowledged SYN.		*/
+#define FLAG_DATA_SACKED 0x20 /* New SACK.				*/
+#define FLAG_SND_UNA_ADVANCED \
+	0x400 /* Snd_una was changed (!= FLAG_DATA_ACKED) */
+#define FLAG_ACKED (FLAG_DATA_ACKED | FLAG_SYN_ACKED)
+#define FLAG_FORWARD_PROGRESS (FLAG_ACKED | FLAG_DATA_SACKED)
+
 #define fib_nh_dev		nh_common.nhc_dev
 #define fib_nh_gw_family	nh_common.nhc_gw_family
 #define fib_nh_gw6		nh_common.nhc_gw.ipv6
@@ -119,4 +138,37 @@
 #define tw_v6_daddr		__tw_common.skc_v6_daddr
 #define tw_v6_rcv_saddr		__tw_common.skc_v6_rcv_saddr
 
+#define tcp_jiffies32 ((__u32)bpf_jiffies64())
+
+static inline struct inet_connection_sock *inet_csk(const struct sock *sk)
+{
+	return (struct inet_connection_sock *)sk;
+}
+
+static inline void *inet_csk_ca(const struct sock *sk)
+{
+	return (void *)inet_csk(sk)->icsk_ca_priv;
+}
+
+static inline struct tcp_sock *tcp_sk(const struct sock *sk)
+{
+	return (struct tcp_sock *)sk;
+}
+
+static inline bool tcp_in_slow_start(const struct tcp_sock *tp)
+{
+	return tp->snd_cwnd < tp->snd_ssthresh;
+}
+
+static inline bool tcp_is_cwnd_limited(const struct sock *sk)
+{
+	const struct tcp_sock *tp = tcp_sk(sk);
+
+	/* If in slow start, ensure cwnd grows to twice what was ACKed. */
+	if (tcp_in_slow_start(tp))
+		return tp->snd_cwnd < 2 * tp->max_packets_out;
+
+	return !!BPF_CORE_READ_BITFIELD(tp, is_cwnd_limited);
+}
+
 #endif
diff --git a/tools/testing/selftests/bpf/progs/cgrp_kfunc_common.h b/tools/testing/selftests/bpf/progs/cgrp_kfunc_common.h
index 22914a70db54..73ba32e9a693 100644
--- a/tools/testing/selftests/bpf/progs/cgrp_kfunc_common.h
+++ b/tools/testing/selftests/bpf/progs/cgrp_kfunc_common.h
@@ -13,7 +13,7 @@ struct __cgrps_kfunc_map_value {
 	struct cgroup __kptr * cgrp;
 };
 
-struct hash_map {
+struct {
 	__uint(type, BPF_MAP_TYPE_HASH);
 	__type(key, int);
 	__type(value, struct __cgrps_kfunc_map_value);
diff --git a/tools/testing/selftests/bpf/progs/connect4_prog.c b/tools/testing/selftests/bpf/progs/connect4_prog.c
index 7ef49ec04838..9e9ebf27b878 100644
--- a/tools/testing/selftests/bpf/progs/connect4_prog.c
+++ b/tools/testing/selftests/bpf/progs/connect4_prog.c
@@ -14,8 +14,6 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
 
-#include "bpf_tcp_helpers.h"
-
 #define SRC_REWRITE_IP4		0x7f000004U
 #define DST_REWRITE_IP4		0x7f000001U
 #define DST_REWRITE_PORT4	4444
@@ -32,6 +30,10 @@
 #define IFNAMSIZ 16
 #endif
 
+#ifndef SOL_TCP
+#define SOL_TCP 6
+#endif
+
 __attribute__ ((noinline)) __weak
 int do_bind(struct bpf_sock_addr *ctx)
 {
@@ -197,4 +199,10 @@ int connect_v4_prog(struct bpf_sock_addr *ctx)
 	return do_bind(ctx) ? 1 : 0;
 }
 
+SEC("cgroup/connect4")
+int connect_v4_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/connect6_prog.c b/tools/testing/selftests/bpf/progs/connect6_prog.c
index 40266d2c737c..e98573b00ddb 100644
--- a/tools/testing/selftests/bpf/progs/connect6_prog.c
+++ b/tools/testing/selftests/bpf/progs/connect6_prog.c
@@ -90,4 +90,10 @@ int connect_v6_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/connect6")
+int connect_v6_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/connect_unix_prog.c b/tools/testing/selftests/bpf/progs/connect_unix_prog.c
index 2ef0e0c46d17..ba60adadb335 100644
--- a/tools/testing/selftests/bpf/progs/connect_unix_prog.c
+++ b/tools/testing/selftests/bpf/progs/connect_unix_prog.c
@@ -36,4 +36,10 @@ int connect_unix_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/connect_unix")
+int connect_unix_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/cpumask_common.h b/tools/testing/selftests/bpf/progs/cpumask_common.h
index c705d8112a35..b979e91f55f0 100644
--- a/tools/testing/selftests/bpf/progs/cpumask_common.h
+++ b/tools/testing/selftests/bpf/progs/cpumask_common.h
@@ -9,7 +9,7 @@
 
 int err;
 
-#define private(name) SEC(".bss." #name) __hidden __attribute__((aligned(8)))
+#define private(name) SEC(".bss." #name) __attribute__((aligned(8)))
 private(MASK) static struct bpf_cpumask __kptr * global_mask;
 
 struct __cpumask_map_value {
diff --git a/tools/testing/selftests/bpf/progs/cpumask_failure.c b/tools/testing/selftests/bpf/progs/cpumask_failure.c
index a9bf6ea336cf..a988d2823b52 100644
--- a/tools/testing/selftests/bpf/progs/cpumask_failure.c
+++ b/tools/testing/selftests/bpf/progs/cpumask_failure.c
@@ -61,11 +61,8 @@ SEC("tp_btf/task_newtask")
 __failure __msg("bpf_cpumask_set_cpu args#1 expected pointer to STRUCT bpf_cpumask")
 int BPF_PROG(test_mutate_cpumask, struct task_struct *task, u64 clone_flags)
 {
-	struct bpf_cpumask *cpumask;
-
 	/* Can't set the CPU of a non-struct bpf_cpumask. */
 	bpf_cpumask_set_cpu(0, (struct bpf_cpumask *)task->cpus_ptr);
-	__sink(cpumask);
 
 	return 0;
 }
diff --git a/tools/testing/selftests/bpf/progs/crypto_basic.c b/tools/testing/selftests/bpf/progs/crypto_basic.c
new file mode 100644
index 000000000000..8cf7168b42d5
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/crypto_basic.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2023 Meta Platforms, Inc. and affiliates. */
+
+#include "vmlinux.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+#include "bpf_kfuncs.h"
+#include "crypto_common.h"
+
+int status;
+SEC("syscall")
+int crypto_release(void *ctx)
+{
+	struct bpf_crypto_params params = {
+		.type = "skcipher",
+		.algo = "ecb(aes)",
+		.key_len = 16,
+	};
+
+	struct bpf_crypto_ctx *cctx;
+	int err = 0;
+
+	status = 0;
+
+	cctx = bpf_crypto_ctx_create(&params, sizeof(params), &err);
+
+	if (!cctx) {
+		status = err;
+		return 0;
+	}
+
+	bpf_crypto_ctx_release(cctx);
+
+	return 0;
+}
+
+SEC("syscall")
+__failure __msg("Unreleased reference")
+int crypto_acquire(void *ctx)
+{
+	struct bpf_crypto_params params = {
+		.type = "skcipher",
+		.algo = "ecb(aes)",
+		.key_len = 16,
+	};
+	struct bpf_crypto_ctx *cctx;
+	int err = 0;
+
+	status = 0;
+
+	cctx = bpf_crypto_ctx_create(&params, sizeof(params), &err);
+
+	if (!cctx) {
+		status = err;
+		return 0;
+	}
+
+	cctx = bpf_crypto_ctx_acquire(cctx);
+	if (!cctx)
+		return -EINVAL;
+
+	bpf_crypto_ctx_release(cctx);
+
+	return 0;
+}
+
+char __license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/crypto_bench.c b/tools/testing/selftests/bpf/progs/crypto_bench.c
new file mode 100644
index 000000000000..e61fe0882293
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/crypto_bench.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#include "vmlinux.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+#include "bpf_kfuncs.h"
+#include "crypto_common.h"
+
+const volatile unsigned int len = 16;
+char cipher[128] = {};
+u32 key_len, authsize;
+char dst[256] = {};
+u8 key[256] = {};
+long hits = 0;
+int status;
+
+SEC("syscall")
+int crypto_setup(void *args)
+{
+	struct bpf_crypto_ctx *cctx;
+	struct bpf_crypto_params params = {
+		.type = "skcipher",
+		.key_len = key_len,
+		.authsize = authsize,
+	};
+	int err = 0;
+
+	status = 0;
+
+	if (!cipher[0] || !key_len || key_len > 256) {
+		status = -EINVAL;
+		return 0;
+	}
+
+	__builtin_memcpy(&params.algo, cipher, sizeof(cipher));
+	__builtin_memcpy(&params.key, key, sizeof(key));
+	cctx = bpf_crypto_ctx_create(&params, sizeof(params), &err);
+
+	if (!cctx) {
+		status = err;
+		return 0;
+	}
+
+	err = crypto_ctx_insert(cctx);
+	if (err && err != -EEXIST)
+		status = err;
+
+	return 0;
+}
+
+SEC("tc")
+int crypto_encrypt(struct __sk_buff *skb)
+{
+	struct __crypto_ctx_value *v;
+	struct bpf_crypto_ctx *ctx;
+	struct bpf_dynptr psrc, pdst, iv;
+
+	v = crypto_ctx_value_lookup();
+	if (!v) {
+		status = -ENOENT;
+		return 0;
+	}
+
+	ctx = v->ctx;
+	if (!ctx) {
+		status = -ENOENT;
+		return 0;
+	}
+
+	bpf_dynptr_from_skb(skb, 0, &psrc);
+	bpf_dynptr_from_mem(dst, len, 0, &pdst);
+	bpf_dynptr_from_mem(dst, 0, 0, &iv);
+
+	status = bpf_crypto_encrypt(ctx, &psrc, &pdst, &iv);
+	__sync_add_and_fetch(&hits, 1);
+
+	return 0;
+}
+
+SEC("tc")
+int crypto_decrypt(struct __sk_buff *skb)
+{
+	struct bpf_dynptr psrc, pdst, iv;
+	struct __crypto_ctx_value *v;
+	struct bpf_crypto_ctx *ctx;
+
+	v = crypto_ctx_value_lookup();
+	if (!v)
+		return -ENOENT;
+
+	ctx = v->ctx;
+	if (!ctx)
+		return -ENOENT;
+
+	bpf_dynptr_from_skb(skb, 0, &psrc);
+	bpf_dynptr_from_mem(dst, len, 0, &pdst);
+	bpf_dynptr_from_mem(dst, 0, 0, &iv);
+
+	status = bpf_crypto_decrypt(ctx, &psrc, &pdst, &iv);
+	__sync_add_and_fetch(&hits, 1);
+
+	return 0;
+}
+
+char __license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/crypto_common.h b/tools/testing/selftests/bpf/progs/crypto_common.h
new file mode 100644
index 000000000000..57dd7a68a8c3
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/crypto_common.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#ifndef _CRYPTO_COMMON_H
+#define _CRYPTO_COMMON_H
+
+#include "errno.h"
+#include <stdbool.h>
+
+struct bpf_crypto_ctx *bpf_crypto_ctx_create(const struct bpf_crypto_params *params,
+					     u32 params__sz, int *err) __ksym;
+struct bpf_crypto_ctx *bpf_crypto_ctx_acquire(struct bpf_crypto_ctx *ctx) __ksym;
+void bpf_crypto_ctx_release(struct bpf_crypto_ctx *ctx) __ksym;
+int bpf_crypto_encrypt(struct bpf_crypto_ctx *ctx, const struct bpf_dynptr *src,
+		       const struct bpf_dynptr *dst, const struct bpf_dynptr *iv) __ksym;
+int bpf_crypto_decrypt(struct bpf_crypto_ctx *ctx, const struct bpf_dynptr *src,
+		       const struct bpf_dynptr *dst, const struct bpf_dynptr *iv) __ksym;
+
+struct __crypto_ctx_value {
+	struct bpf_crypto_ctx __kptr * ctx;
+};
+
+struct array_map {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__type(key, int);
+	__type(value, struct __crypto_ctx_value);
+	__uint(max_entries, 1);
+} __crypto_ctx_map SEC(".maps");
+
+static inline struct __crypto_ctx_value *crypto_ctx_value_lookup(void)
+{
+	u32 key = 0;
+
+	return bpf_map_lookup_elem(&__crypto_ctx_map, &key);
+}
+
+static inline int crypto_ctx_insert(struct bpf_crypto_ctx *ctx)
+{
+	struct __crypto_ctx_value local, *v;
+	struct bpf_crypto_ctx *old;
+	u32 key = 0;
+	int err;
+
+	local.ctx = NULL;
+	err = bpf_map_update_elem(&__crypto_ctx_map, &key, &local, 0);
+	if (err) {
+		bpf_crypto_ctx_release(ctx);
+		return err;
+	}
+
+	v = bpf_map_lookup_elem(&__crypto_ctx_map, &key);
+	if (!v) {
+		bpf_crypto_ctx_release(ctx);
+		return -ENOENT;
+	}
+
+	old = bpf_kptr_xchg(&v->ctx, ctx);
+	if (old) {
+		bpf_crypto_ctx_release(old);
+		return -EEXIST;
+	}
+
+	return 0;
+}
+
+#endif /* _CRYPTO_COMMON_H */
diff --git a/tools/testing/selftests/bpf/progs/crypto_sanity.c b/tools/testing/selftests/bpf/progs/crypto_sanity.c
new file mode 100644
index 000000000000..1be0a3fa5efd
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/crypto_sanity.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#include "vmlinux.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+#include "bpf_kfuncs.h"
+#include "crypto_common.h"
+
+unsigned char key[256] = {};
+u16 udp_test_port = 7777;
+u32 authsize, key_len;
+char algo[128] = {};
+char dst[16] = {};
+int status;
+
+static int skb_dynptr_validate(struct __sk_buff *skb, struct bpf_dynptr *psrc)
+{
+	struct ipv6hdr ip6h;
+	struct udphdr udph;
+	u32 offset;
+
+	if (skb->protocol != __bpf_constant_htons(ETH_P_IPV6))
+		return -1;
+
+	if (bpf_skb_load_bytes(skb, ETH_HLEN, &ip6h, sizeof(ip6h)))
+		return -1;
+
+	if (ip6h.nexthdr != IPPROTO_UDP)
+		return -1;
+
+	if (bpf_skb_load_bytes(skb, ETH_HLEN + sizeof(ip6h), &udph, sizeof(udph)))
+		return -1;
+
+	if (udph.dest != __bpf_htons(udp_test_port))
+		return -1;
+
+	offset = ETH_HLEN + sizeof(ip6h) + sizeof(udph);
+	if (skb->len < offset + 16)
+		return -1;
+
+	/* let's make sure that 16 bytes of payload are in the linear part of skb */
+	bpf_skb_pull_data(skb, offset + 16);
+	bpf_dynptr_from_skb(skb, 0, psrc);
+	bpf_dynptr_adjust(psrc, offset, offset + 16);
+
+	return 0;
+}
+
+SEC("syscall")
+int skb_crypto_setup(void *ctx)
+{
+	struct bpf_crypto_params params = {
+		.type = "skcipher",
+		.key_len = key_len,
+		.authsize = authsize,
+	};
+	struct bpf_crypto_ctx *cctx;
+	int err = 0;
+
+	status = 0;
+
+	if (key_len > 256) {
+		status = -EINVAL;
+		return 0;
+	}
+
+	__builtin_memcpy(&params.algo, algo, sizeof(algo));
+	__builtin_memcpy(&params.key, key, sizeof(key));
+	cctx = bpf_crypto_ctx_create(&params, sizeof(params), &err);
+
+	if (!cctx) {
+		status = err;
+		return 0;
+	}
+
+	err = crypto_ctx_insert(cctx);
+	if (err && err != -EEXIST)
+		status = err;
+
+	return 0;
+}
+
+SEC("tc")
+int decrypt_sanity(struct __sk_buff *skb)
+{
+	struct __crypto_ctx_value *v;
+	struct bpf_crypto_ctx *ctx;
+	struct bpf_dynptr psrc, pdst, iv;
+	int err;
+
+	err = skb_dynptr_validate(skb, &psrc);
+	if (err < 0) {
+		status = err;
+		return TC_ACT_SHOT;
+	}
+
+	v = crypto_ctx_value_lookup();
+	if (!v) {
+		status = -ENOENT;
+		return TC_ACT_SHOT;
+	}
+
+	ctx = v->ctx;
+	if (!ctx) {
+		status = -ENOENT;
+		return TC_ACT_SHOT;
+	}
+
+	/* dst is a global variable to make testing part easier to check. In real
+	 * production code, a percpu map should be used to store the result.
+	 */
+	bpf_dynptr_from_mem(dst, sizeof(dst), 0, &pdst);
+	/* iv dynptr has to be initialized with 0 size, but proper memory region
+	 * has to be provided anyway
+	 */
+	bpf_dynptr_from_mem(dst, 0, 0, &iv);
+
+	status = bpf_crypto_decrypt(ctx, &psrc, &pdst, &iv);
+
+	return TC_ACT_SHOT;
+}
+
+SEC("tc")
+int encrypt_sanity(struct __sk_buff *skb)
+{
+	struct __crypto_ctx_value *v;
+	struct bpf_crypto_ctx *ctx;
+	struct bpf_dynptr psrc, pdst, iv;
+	int err;
+
+	status = 0;
+
+	err = skb_dynptr_validate(skb, &psrc);
+	if (err < 0) {
+		status = err;
+		return TC_ACT_SHOT;
+	}
+
+	v = crypto_ctx_value_lookup();
+	if (!v) {
+		status = -ENOENT;
+		return TC_ACT_SHOT;
+	}
+
+	ctx = v->ctx;
+	if (!ctx) {
+		status = -ENOENT;
+		return TC_ACT_SHOT;
+	}
+
+	/* dst is a global variable to make testing part easier to check. In real
+	 * production code, a percpu map should be used to store the result.
+	 */
+	bpf_dynptr_from_mem(dst, sizeof(dst), 0, &pdst);
+	/* iv dynptr has to be initialized with 0 size, but proper memory region
+	 * has to be provided anyway
+	 */
+	bpf_dynptr_from_mem(dst, 0, 0, &iv);
+
+	status = bpf_crypto_encrypt(ctx, &psrc, &pdst, &iv);
+
+	return TC_ACT_SHOT;
+}
+
+char __license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/dummy_st_ops_success.c b/tools/testing/selftests/bpf/progs/dummy_st_ops_success.c
index 1efa746c25dc..ec0c595d47af 100644
--- a/tools/testing/selftests/bpf/progs/dummy_st_ops_success.c
+++ b/tools/testing/selftests/bpf/progs/dummy_st_ops_success.c
@@ -11,8 +11,17 @@ int BPF_PROG(test_1, struct bpf_dummy_ops_state *state)
 {
 	int ret;
 
-	if (!state)
-		return 0xf2f3f4f5;
+	/* Check that 'state' nullable status is detected correctly.
+	 * If 'state' argument would be assumed non-null by verifier
+	 * the code below would be deleted as dead (which it shouldn't).
+	 * Hide it from the compiler behind 'asm' block to avoid
+	 * unnecessary optimizations.
+	 */
+	asm volatile (
+		"if %[state] != 0 goto +2;"
+		"r0 = 0xf2f3f4f5;"
+		"exit;"
+	::[state]"p"(state));
 
 	ret = state->val;
 	state->val = 0x5a;
@@ -25,7 +34,7 @@ SEC("struct_ops/test_2")
 int BPF_PROG(test_2, struct bpf_dummy_ops_state *state, int a1, unsigned short a2,
 	     char a3, unsigned long a4)
 {
-	test_2_args[0] = (unsigned long)state;
+	test_2_args[0] = state->val;
 	test_2_args[1] = a1;
 	test_2_args[2] = a2;
 	test_2_args[3] = a3;
diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c
index 7ce7e827d5f0..66a60bfb5867 100644
--- a/tools/testing/selftests/bpf/progs/dynptr_fail.c
+++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c
@@ -80,7 +80,7 @@ SEC("?raw_tp")
 __failure __msg("Unreleased reference id=2")
 int ringbuf_missing_release1(void *ctx)
 {
-	struct bpf_dynptr ptr;
+	struct bpf_dynptr ptr = {};
 
 	bpf_ringbuf_reserve_dynptr(&ringbuf, val, 0, &ptr);
 
@@ -1385,7 +1385,7 @@ SEC("?raw_tp")
 __failure __msg("Expected an initialized dynptr as arg #1")
 int dynptr_adjust_invalid(void *ctx)
 {
-	struct bpf_dynptr ptr;
+	struct bpf_dynptr ptr = {};
 
 	/* this should fail */
 	bpf_dynptr_adjust(&ptr, 1, 2);
@@ -1398,7 +1398,7 @@ SEC("?raw_tp")
 __failure __msg("Expected an initialized dynptr as arg #1")
 int dynptr_is_null_invalid(void *ctx)
 {
-	struct bpf_dynptr ptr;
+	struct bpf_dynptr ptr = {};
 
 	/* this should fail */
 	bpf_dynptr_is_null(&ptr);
@@ -1411,7 +1411,7 @@ SEC("?raw_tp")
 __failure __msg("Expected an initialized dynptr as arg #1")
 int dynptr_is_rdonly_invalid(void *ctx)
 {
-	struct bpf_dynptr ptr;
+	struct bpf_dynptr ptr = {};
 
 	/* this should fail */
 	bpf_dynptr_is_rdonly(&ptr);
@@ -1424,7 +1424,7 @@ SEC("?raw_tp")
 __failure __msg("Expected an initialized dynptr as arg #1")
 int dynptr_size_invalid(void *ctx)
 {
-	struct bpf_dynptr ptr;
+	struct bpf_dynptr ptr = {};
 
 	/* this should fail */
 	bpf_dynptr_size(&ptr);
@@ -1437,7 +1437,7 @@ SEC("?raw_tp")
 __failure __msg("Expected an initialized dynptr as arg #1")
 int clone_invalid1(void *ctx)
 {
-	struct bpf_dynptr ptr1;
+	struct bpf_dynptr ptr1 = {};
 	struct bpf_dynptr ptr2;
 
 	/* this should fail */
diff --git a/tools/testing/selftests/bpf/progs/fib_lookup.c b/tools/testing/selftests/bpf/progs/fib_lookup.c
index c4514dd58c62..7b5dd2214ff4 100644
--- a/tools/testing/selftests/bpf/progs/fib_lookup.c
+++ b/tools/testing/selftests/bpf/progs/fib_lookup.c
@@ -3,8 +3,8 @@
 
 #include <linux/types.h>
 #include <linux/bpf.h>
+#include <linux/pkt_cls.h>
 #include <bpf/bpf_helpers.h>
-#include "bpf_tracing_net.h"
 
 struct bpf_fib_lookup fib_params = {};
 int fib_lookup_ret = 0;
diff --git a/tools/testing/selftests/bpf/progs/for_each_multi_maps.c b/tools/testing/selftests/bpf/progs/for_each_multi_maps.c
new file mode 100644
index 000000000000..ff0bed7d4459
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/for_each_multi_maps.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "vmlinux.h"
+#include <bpf/bpf_helpers.h>
+
+char _license[] SEC("license") = "GPL";
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(max_entries, 3);
+	__type(key, __u32);
+	__type(value, __u64);
+} arraymap SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__uint(max_entries, 5);
+	__type(key, __u32);
+	__type(value, __u64);
+} hashmap SEC(".maps");
+
+struct callback_ctx {
+	int output;
+};
+
+u32 data_output = 0;
+int use_array = 0;
+
+static __u64
+check_map_elem(struct bpf_map *map, __u32 *key, __u64 *val,
+	       struct callback_ctx *data)
+{
+	data->output += *val;
+	return 0;
+}
+
+SEC("tc")
+int test_pkt_access(struct __sk_buff *skb)
+{
+	struct callback_ctx data;
+
+	data.output = 0;
+	if (use_array)
+		bpf_for_each_map_elem(&arraymap, check_map_elem, &data, 0);
+	else
+		bpf_for_each_map_elem(&hashmap, check_map_elem, &data, 0);
+	data_output = data.output;
+
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/progs/getpeername4_prog.c b/tools/testing/selftests/bpf/progs/getpeername4_prog.c
new file mode 100644
index 000000000000..4c97208cd25d
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/getpeername4_prog.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Google LLC */
+
+#include "vmlinux.h"
+
+#include <string.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <bpf/bpf_core_read.h>
+#include "bpf_kfuncs.h"
+
+#define REWRITE_ADDRESS_IP4   0xc0a801fe // 192.168.1.254
+#define REWRITE_ADDRESS_PORT4 4040
+
+SEC("cgroup/getpeername4")
+int getpeername_v4_prog(struct bpf_sock_addr *ctx)
+{
+	ctx->user_ip4 = bpf_htonl(REWRITE_ADDRESS_IP4);
+	ctx->user_port = bpf_htons(REWRITE_ADDRESS_PORT4);
+
+	return 1;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/getpeername6_prog.c b/tools/testing/selftests/bpf/progs/getpeername6_prog.c
new file mode 100644
index 000000000000..070e4d7f636c
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/getpeername6_prog.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Google LLC */
+
+#include "vmlinux.h"
+
+#include <string.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <bpf/bpf_core_read.h>
+#include "bpf_kfuncs.h"
+
+#define REWRITE_ADDRESS_IP6_0 0xfaceb00c
+#define REWRITE_ADDRESS_IP6_1 0x12345678
+#define REWRITE_ADDRESS_IP6_2 0x00000000
+#define REWRITE_ADDRESS_IP6_3 0x0000abcd
+
+#define REWRITE_ADDRESS_PORT6 6060
+
+SEC("cgroup/getpeername6")
+int getpeername_v6_prog(struct bpf_sock_addr *ctx)
+{
+	ctx->user_ip6[0] = bpf_htonl(REWRITE_ADDRESS_IP6_0);
+	ctx->user_ip6[1] = bpf_htonl(REWRITE_ADDRESS_IP6_1);
+	ctx->user_ip6[2] = bpf_htonl(REWRITE_ADDRESS_IP6_2);
+	ctx->user_ip6[3] = bpf_htonl(REWRITE_ADDRESS_IP6_3);
+	ctx->user_port = bpf_htons(REWRITE_ADDRESS_PORT6);
+
+	return 1;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/getsockname4_prog.c b/tools/testing/selftests/bpf/progs/getsockname4_prog.c
new file mode 100644
index 000000000000..e298487c6347
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/getsockname4_prog.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Google LLC */
+
+#include "vmlinux.h"
+
+#include <string.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <bpf/bpf_core_read.h>
+#include "bpf_kfuncs.h"
+
+#define REWRITE_ADDRESS_IP4   0xc0a801fe // 192.168.1.254
+#define REWRITE_ADDRESS_PORT4 4040
+
+SEC("cgroup/getsockname4")
+int getsockname_v4_prog(struct bpf_sock_addr *ctx)
+{
+	ctx->user_ip4 = bpf_htonl(REWRITE_ADDRESS_IP4);
+	ctx->user_port = bpf_htons(REWRITE_ADDRESS_PORT4);
+
+	return 1;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/getsockname6_prog.c b/tools/testing/selftests/bpf/progs/getsockname6_prog.c
new file mode 100644
index 000000000000..811d10cd5525
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/getsockname6_prog.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Google LLC */
+
+#include "vmlinux.h"
+
+#include <string.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <bpf/bpf_core_read.h>
+#include "bpf_kfuncs.h"
+
+#define REWRITE_ADDRESS_IP6_0 0xfaceb00c
+#define REWRITE_ADDRESS_IP6_1 0x12345678
+#define REWRITE_ADDRESS_IP6_2 0x00000000
+#define REWRITE_ADDRESS_IP6_3 0x0000abcd
+
+#define REWRITE_ADDRESS_PORT6 6060
+
+SEC("cgroup/getsockname6")
+int getsockname_v6_prog(struct bpf_sock_addr *ctx)
+{
+	ctx->user_ip6[0] = bpf_htonl(REWRITE_ADDRESS_IP6_0);
+	ctx->user_ip6[1] = bpf_htonl(REWRITE_ADDRESS_IP6_1);
+	ctx->user_ip6[2] = bpf_htonl(REWRITE_ADDRESS_IP6_2);
+	ctx->user_ip6[3] = bpf_htonl(REWRITE_ADDRESS_IP6_3);
+	ctx->user_port = bpf_htons(REWRITE_ADDRESS_PORT6);
+
+	return 1;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/iters.c b/tools/testing/selftests/bpf/progs/iters.c
index 3db416606f2f..fe65e0952a1e 100644
--- a/tools/testing/selftests/bpf/progs/iters.c
+++ b/tools/testing/selftests/bpf/progs/iters.c
@@ -673,7 +673,7 @@ static __noinline void fill(struct bpf_iter_num *it, int *arr, __u32 n, int mul)
 
 static __noinline int sum(struct bpf_iter_num *it, int *arr, __u32 n)
 {
-	int *t, i, sum = 0;;
+	int *t, i, sum = 0;
 
 	while ((t = bpf_iter_num_next(it))) {
 		i = *t;
diff --git a/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c b/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c
index f46965053acb..4d619bea9c75 100644
--- a/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c
+++ b/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c
@@ -4,6 +4,10 @@
 #include <bpf/bpf_helpers.h>
 #include "bpf_misc.h"
 
+#ifndef __clang__
+#pragma GCC diagnostic ignored "-Warray-bounds"
+#endif
+
 char _license[] SEC("license") = "GPL";
 
 struct {
diff --git a/tools/testing/selftests/bpf/progs/kprobe_multi_session.c b/tools/testing/selftests/bpf/progs/kprobe_multi_session.c
new file mode 100644
index 000000000000..bbba9eb46551
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/kprobe_multi_session.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include <stdbool.h>
+#include "bpf_kfuncs.h"
+
+#define ARRAY_SIZE(x) (int)(sizeof(x) / sizeof((x)[0]))
+
+char _license[] SEC("license") = "GPL";
+
+extern const void bpf_fentry_test1 __ksym;
+extern const void bpf_fentry_test2 __ksym;
+extern const void bpf_fentry_test3 __ksym;
+extern const void bpf_fentry_test4 __ksym;
+extern const void bpf_fentry_test5 __ksym;
+extern const void bpf_fentry_test6 __ksym;
+extern const void bpf_fentry_test7 __ksym;
+extern const void bpf_fentry_test8 __ksym;
+
+int pid = 0;
+
+__u64 kprobe_session_result[8];
+
+static int session_check(void *ctx)
+{
+	unsigned int i;
+	__u64 addr;
+	const void *kfuncs[] = {
+		&bpf_fentry_test1,
+		&bpf_fentry_test2,
+		&bpf_fentry_test3,
+		&bpf_fentry_test4,
+		&bpf_fentry_test5,
+		&bpf_fentry_test6,
+		&bpf_fentry_test7,
+		&bpf_fentry_test8,
+	};
+
+	if (bpf_get_current_pid_tgid() >> 32 != pid)
+		return 1;
+
+	addr = bpf_get_func_ip(ctx);
+
+	for (i = 0; i < ARRAY_SIZE(kfuncs); i++) {
+		if (kfuncs[i] == (void *) addr) {
+			kprobe_session_result[i]++;
+			break;
+		}
+	}
+
+	/*
+	 * Force probes for function bpf_fentry_test[5-8] not to
+	 * install and execute the return probe
+	 */
+	if (((const void *) addr == &bpf_fentry_test5) ||
+	    ((const void *) addr == &bpf_fentry_test6) ||
+	    ((const void *) addr == &bpf_fentry_test7) ||
+	    ((const void *) addr == &bpf_fentry_test8))
+		return 1;
+
+	return 0;
+}
+
+/*
+ * No tests in here, just to trigger 'bpf_fentry_test*'
+ * through tracing test_run
+ */
+SEC("fentry/bpf_modify_return_test")
+int BPF_PROG(trigger)
+{
+	return 0;
+}
+
+SEC("kprobe.session/bpf_fentry_test*")
+int test_kprobe(struct pt_regs *ctx)
+{
+	return session_check(ctx);
+}
diff --git a/tools/testing/selftests/bpf/progs/kprobe_multi_session_cookie.c b/tools/testing/selftests/bpf/progs/kprobe_multi_session_cookie.c
new file mode 100644
index 000000000000..d49070803e22
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/kprobe_multi_session_cookie.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include <stdbool.h>
+#include "bpf_kfuncs.h"
+
+char _license[] SEC("license") = "GPL";
+
+int pid = 0;
+
+__u64 test_kprobe_1_result = 0;
+__u64 test_kprobe_2_result = 0;
+__u64 test_kprobe_3_result = 0;
+
+/*
+ * No tests in here, just to trigger 'bpf_fentry_test*'
+ * through tracing test_run
+ */
+SEC("fentry/bpf_modify_return_test")
+int BPF_PROG(trigger)
+{
+	return 0;
+}
+
+static int check_cookie(__u64 val, __u64 *result)
+{
+	long *cookie;
+
+	if (bpf_get_current_pid_tgid() >> 32 != pid)
+		return 1;
+
+	cookie = bpf_session_cookie();
+
+	if (bpf_session_is_return())
+		*result = *cookie == val ? val : 0;
+	else
+		*cookie = val;
+	return 0;
+}
+
+SEC("kprobe.session/bpf_fentry_test1")
+int test_kprobe_1(struct pt_regs *ctx)
+{
+	return check_cookie(1, &test_kprobe_1_result);
+}
+
+SEC("kprobe.session/bpf_fentry_test1")
+int test_kprobe_2(struct pt_regs *ctx)
+{
+	return check_cookie(2, &test_kprobe_2_result);
+}
+
+SEC("kprobe.session/bpf_fentry_test1")
+int test_kprobe_3(struct pt_regs *ctx)
+{
+	return check_cookie(3, &test_kprobe_3_result);
+}
diff --git a/tools/testing/selftests/bpf/progs/local_storage.c b/tools/testing/selftests/bpf/progs/local_storage.c
index e5e3a8b8dd07..637e75df2e14 100644
--- a/tools/testing/selftests/bpf/progs/local_storage.c
+++ b/tools/testing/selftests/bpf/progs/local_storage.c
@@ -140,11 +140,12 @@ int BPF_PROG(socket_bind, struct socket *sock, struct sockaddr *address,
 {
 	__u32 pid = bpf_get_current_pid_tgid() >> 32;
 	struct local_storage *storage;
+	struct sock *sk = sock->sk;
 
-	if (pid != monitored_pid)
+	if (pid != monitored_pid || !sk)
 		return 0;
 
-	storage = bpf_sk_storage_get(&sk_storage_map, sock->sk, 0, 0);
+	storage = bpf_sk_storage_get(&sk_storage_map, sk, 0, 0);
 	if (!storage)
 		return 0;
 
@@ -155,24 +156,24 @@ int BPF_PROG(socket_bind, struct socket *sock, struct sockaddr *address,
 	/* This tests that we can associate multiple elements
 	 * with the local storage.
 	 */
-	storage = bpf_sk_storage_get(&sk_storage_map2, sock->sk, 0,
+	storage = bpf_sk_storage_get(&sk_storage_map2, sk, 0,
 				     BPF_LOCAL_STORAGE_GET_F_CREATE);
 	if (!storage)
 		return 0;
 
-	if (bpf_sk_storage_delete(&sk_storage_map2, sock->sk))
+	if (bpf_sk_storage_delete(&sk_storage_map2, sk))
 		return 0;
 
-	storage = bpf_sk_storage_get(&sk_storage_map2, sock->sk, 0,
+	storage = bpf_sk_storage_get(&sk_storage_map2, sk, 0,
 				     BPF_LOCAL_STORAGE_GET_F_CREATE);
 	if (!storage)
 		return 0;
 
-	if (bpf_sk_storage_delete(&sk_storage_map, sock->sk))
+	if (bpf_sk_storage_delete(&sk_storage_map, sk))
 		return 0;
 
 	/* Ensure that the sk_storage_map is disconnected from the storage. */
-	if (!sock->sk->sk_bpf_storage || sock->sk->sk_bpf_storage->smap)
+	if (!sk->sk_bpf_storage || sk->sk_bpf_storage->smap)
 		return 0;
 
 	sk_storage_result = 0;
@@ -185,11 +186,12 @@ int BPF_PROG(socket_post_create, struct socket *sock, int family, int type,
 {
 	__u32 pid = bpf_get_current_pid_tgid() >> 32;
 	struct local_storage *storage;
+	struct sock *sk = sock->sk;
 
-	if (pid != monitored_pid)
+	if (pid != monitored_pid || !sk)
 		return 0;
 
-	storage = bpf_sk_storage_get(&sk_storage_map, sock->sk, 0,
+	storage = bpf_sk_storage_get(&sk_storage_map, sk, 0,
 				     BPF_LOCAL_STORAGE_GET_F_CREATE);
 	if (!storage)
 		return 0;
diff --git a/tools/testing/selftests/bpf/progs/lsm_cgroup.c b/tools/testing/selftests/bpf/progs/lsm_cgroup.c
index 02c11d16b692..d7598538aa2d 100644
--- a/tools/testing/selftests/bpf/progs/lsm_cgroup.c
+++ b/tools/testing/selftests/bpf/progs/lsm_cgroup.c
@@ -103,11 +103,15 @@ static __always_inline int real_bind(struct socket *sock,
 				     int addrlen)
 {
 	struct sockaddr_ll sa = {};
+	struct sock *sk = sock->sk;
 
-	if (sock->sk->__sk_common.skc_family != AF_PACKET)
+	if (!sk)
+		return 1;
+
+	if (sk->__sk_common.skc_family != AF_PACKET)
 		return 1;
 
-	if (sock->sk->sk_kern_sock)
+	if (sk->sk_kern_sock)
 		return 1;
 
 	bpf_probe_read_kernel(&sa, sizeof(sa), address);
diff --git a/tools/testing/selftests/bpf/progs/mptcp_sock.c b/tools/testing/selftests/bpf/progs/mptcp_sock.c
index 91a0d7eff2ac..f3acb90588c7 100644
--- a/tools/testing/selftests/bpf/progs/mptcp_sock.c
+++ b/tools/testing/selftests/bpf/progs/mptcp_sock.c
@@ -2,9 +2,9 @@
 /* Copyright (c) 2020, Tessares SA. */
 /* Copyright (c) 2022, SUSE. */
 
-#include <linux/bpf.h>
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
-#include "bpf_tcp_helpers.h"
+#include <bpf/bpf_tracing.h>
 
 char _license[] SEC("license") = "GPL";
 __u32 token = 0;
diff --git a/tools/testing/selftests/bpf/progs/mptcpify.c b/tools/testing/selftests/bpf/progs/mptcpify.c
index 53301ae8a8f7..cbdc730c3a47 100644
--- a/tools/testing/selftests/bpf/progs/mptcpify.c
+++ b/tools/testing/selftests/bpf/progs/mptcpify.c
@@ -6,10 +6,14 @@
 #include "bpf_tracing_net.h"
 
 char _license[] SEC("license") = "GPL";
+int pid;
 
 SEC("fmod_ret/update_socket_protocol")
 int BPF_PROG(mptcpify, int family, int type, int protocol)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != pid)
+		return protocol;
+
 	if ((family == AF_INET || family == AF_INET6) &&
 	    type == SOCK_STREAM &&
 	    (!protocol || protocol == IPPROTO_TCP)) {
diff --git a/tools/testing/selftests/bpf/progs/preempt_lock.c b/tools/testing/selftests/bpf/progs/preempt_lock.c
new file mode 100644
index 000000000000..672fc368d9c4
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/preempt_lock.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <vmlinux.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+#include "bpf_experimental.h"
+
+SEC("?tc")
+__failure __msg("1 bpf_preempt_enable is missing")
+int preempt_lock_missing_1(struct __sk_buff *ctx)
+{
+	bpf_preempt_disable();
+	return 0;
+}
+
+SEC("?tc")
+__failure __msg("2 bpf_preempt_enable(s) are missing")
+int preempt_lock_missing_2(struct __sk_buff *ctx)
+{
+	bpf_preempt_disable();
+	bpf_preempt_disable();
+	return 0;
+}
+
+SEC("?tc")
+__failure __msg("3 bpf_preempt_enable(s) are missing")
+int preempt_lock_missing_3(struct __sk_buff *ctx)
+{
+	bpf_preempt_disable();
+	bpf_preempt_disable();
+	bpf_preempt_disable();
+	return 0;
+}
+
+SEC("?tc")
+__failure __msg("1 bpf_preempt_enable is missing")
+int preempt_lock_missing_3_minus_2(struct __sk_buff *ctx)
+{
+	bpf_preempt_disable();
+	bpf_preempt_disable();
+	bpf_preempt_disable();
+	bpf_preempt_enable();
+	bpf_preempt_enable();
+	return 0;
+}
+
+static __noinline void preempt_disable(void)
+{
+	bpf_preempt_disable();
+}
+
+static __noinline void preempt_enable(void)
+{
+	bpf_preempt_enable();
+}
+
+SEC("?tc")
+__failure __msg("1 bpf_preempt_enable is missing")
+int preempt_lock_missing_1_subprog(struct __sk_buff *ctx)
+{
+	preempt_disable();
+	return 0;
+}
+
+SEC("?tc")
+__failure __msg("2 bpf_preempt_enable(s) are missing")
+int preempt_lock_missing_2_subprog(struct __sk_buff *ctx)
+{
+	preempt_disable();
+	preempt_disable();
+	return 0;
+}
+
+SEC("?tc")
+__failure __msg("1 bpf_preempt_enable is missing")
+int preempt_lock_missing_2_minus_1_subprog(struct __sk_buff *ctx)
+{
+	preempt_disable();
+	preempt_disable();
+	preempt_enable();
+	return 0;
+}
+
+static __noinline void preempt_balance_subprog(void)
+{
+	preempt_disable();
+	preempt_enable();
+}
+
+SEC("?tc")
+__success int preempt_balance(struct __sk_buff *ctx)
+{
+	bpf_guard_preempt();
+	return 0;
+}
+
+SEC("?tc")
+__success int preempt_balance_subprog_test(struct __sk_buff *ctx)
+{
+	preempt_balance_subprog();
+	return 0;
+}
+
+SEC("?fentry.s/" SYS_PREFIX "sys_getpgid")
+__failure __msg("sleepable helper bpf_copy_from_user#")
+int preempt_sleepable_helper(void *ctx)
+{
+	u32 data;
+
+	bpf_preempt_disable();
+	bpf_copy_from_user(&data, sizeof(data), NULL);
+	bpf_preempt_enable();
+	return 0;
+}
+
+int __noinline preempt_global_subprog(void)
+{
+	preempt_balance_subprog();
+	return 0;
+}
+
+SEC("?tc")
+__failure __msg("global function calls are not allowed with preemption disabled")
+int preempt_global_subprog_test(struct __sk_buff *ctx)
+{
+	preempt_disable();
+	preempt_global_subprog();
+	preempt_enable();
+	return 0;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/sendmsg4_prog.c b/tools/testing/selftests/bpf/progs/sendmsg4_prog.c
index 351e79aef2fa..edc159598a0e 100644
--- a/tools/testing/selftests/bpf/progs/sendmsg4_prog.c
+++ b/tools/testing/selftests/bpf/progs/sendmsg4_prog.c
@@ -49,4 +49,10 @@ int sendmsg_v4_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/sendmsg4")
+int sendmsg_v4_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/sendmsg6_prog.c b/tools/testing/selftests/bpf/progs/sendmsg6_prog.c
index bf9b46b806f6..36a7f960799f 100644
--- a/tools/testing/selftests/bpf/progs/sendmsg6_prog.c
+++ b/tools/testing/selftests/bpf/progs/sendmsg6_prog.c
@@ -20,6 +20,11 @@
 #define DST_REWRITE_IP6_2	0
 #define DST_REWRITE_IP6_3	1
 
+#define DST_REWRITE_IP6_V4_MAPPED_0	0
+#define DST_REWRITE_IP6_V4_MAPPED_1	0
+#define DST_REWRITE_IP6_V4_MAPPED_2	0x0000FFFF
+#define DST_REWRITE_IP6_V4_MAPPED_3	0xc0a80004 // 192.168.0.4
+
 #define DST_REWRITE_PORT6	6666
 
 SEC("cgroup/sendmsg6")
@@ -59,4 +64,56 @@ int sendmsg_v6_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/sendmsg6")
+int sendmsg_v6_v4mapped_prog(struct bpf_sock_addr *ctx)
+{
+	/* Rewrite source. */
+	ctx->msg_src_ip6[0] = bpf_htonl(SRC_REWRITE_IP6_0);
+	ctx->msg_src_ip6[1] = bpf_htonl(SRC_REWRITE_IP6_1);
+	ctx->msg_src_ip6[2] = bpf_htonl(SRC_REWRITE_IP6_2);
+	ctx->msg_src_ip6[3] = bpf_htonl(SRC_REWRITE_IP6_3);
+
+	/* Rewrite destination. */
+	ctx->user_ip6[0] = bpf_htonl(DST_REWRITE_IP6_V4_MAPPED_0);
+	ctx->user_ip6[1] = bpf_htonl(DST_REWRITE_IP6_V4_MAPPED_1);
+	ctx->user_ip6[2] = bpf_htonl(DST_REWRITE_IP6_V4_MAPPED_2);
+	ctx->user_ip6[3] = bpf_htonl(DST_REWRITE_IP6_V4_MAPPED_3);
+
+	ctx->user_port = bpf_htons(DST_REWRITE_PORT6);
+
+	return 1;
+}
+
+SEC("cgroup/sendmsg6")
+int sendmsg_v6_wildcard_prog(struct bpf_sock_addr *ctx)
+{
+	/* Rewrite source. */
+	ctx->msg_src_ip6[0] = bpf_htonl(SRC_REWRITE_IP6_0);
+	ctx->msg_src_ip6[1] = bpf_htonl(SRC_REWRITE_IP6_1);
+	ctx->msg_src_ip6[2] = bpf_htonl(SRC_REWRITE_IP6_2);
+	ctx->msg_src_ip6[3] = bpf_htonl(SRC_REWRITE_IP6_3);
+
+	/* Rewrite destination. */
+	ctx->user_ip6[0] = bpf_htonl(0);
+	ctx->user_ip6[1] = bpf_htonl(0);
+	ctx->user_ip6[2] = bpf_htonl(0);
+	ctx->user_ip6[3] = bpf_htonl(0);
+
+	ctx->user_port = bpf_htons(DST_REWRITE_PORT6);
+
+	return 1;
+}
+
+SEC("cgroup/sendmsg6")
+int sendmsg_v6_preserve_dst_prog(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/sendmsg6")
+int sendmsg_v6_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/sendmsg_unix_prog.c b/tools/testing/selftests/bpf/progs/sendmsg_unix_prog.c
index d8869b03dda9..332d0eb1116f 100644
--- a/tools/testing/selftests/bpf/progs/sendmsg_unix_prog.c
+++ b/tools/testing/selftests/bpf/progs/sendmsg_unix_prog.c
@@ -36,4 +36,10 @@ int sendmsg_unix_prog(struct bpf_sock_addr *ctx)
 	return 1;
 }
 
+SEC("cgroup/sendmsg_unix")
+int sendmsg_unix_deny_prog(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/skb_pkt_end.c b/tools/testing/selftests/bpf/progs/skb_pkt_end.c
index 992b7861003a..db4abd2682fc 100644
--- a/tools/testing/selftests/bpf/progs/skb_pkt_end.c
+++ b/tools/testing/selftests/bpf/progs/skb_pkt_end.c
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
 #define BPF_NO_PRESERVE_ACCESS_INDEX
+#endif
 #include <vmlinux.h>
 #include <bpf/bpf_core_read.h>
 #include <bpf/bpf_helpers.h>
diff --git a/tools/testing/selftests/bpf/progs/sock_addr_kern.c b/tools/testing/selftests/bpf/progs/sock_addr_kern.c
new file mode 100644
index 000000000000..8386bb15ccdc
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/sock_addr_kern.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Google LLC */
+#include <vmlinux.h>
+#include <bpf/bpf_helpers.h>
+#include "../bpf_testmod/bpf_testmod_kfunc.h"
+
+SEC("syscall")
+int init_sock(struct init_sock_args *args)
+{
+	bpf_kfunc_init_sock(args);
+
+	return 0;
+}
+
+SEC("syscall")
+int close_sock(void *ctx)
+{
+	bpf_kfunc_close_sock();
+
+	return 0;
+}
+
+SEC("syscall")
+int kernel_connect(struct addr_args *args)
+{
+	return bpf_kfunc_call_kernel_connect(args);
+}
+
+SEC("syscall")
+int kernel_bind(struct addr_args *args)
+{
+	return bpf_kfunc_call_kernel_bind(args);
+}
+
+SEC("syscall")
+int kernel_listen(struct addr_args *args)
+{
+	return bpf_kfunc_call_kernel_listen();
+}
+
+SEC("syscall")
+int kernel_sendmsg(struct sendmsg_args *args)
+{
+	return bpf_kfunc_call_kernel_sendmsg(args);
+}
+
+SEC("syscall")
+int sock_sendmsg(struct sendmsg_args *args)
+{
+	return bpf_kfunc_call_sock_sendmsg(args);
+}
+
+SEC("syscall")
+int kernel_getsockname(struct addr_args *args)
+{
+	return bpf_kfunc_call_kernel_getsockname(args);
+}
+
+SEC("syscall")
+int kernel_getpeername(struct addr_args *args)
+{
+	return bpf_kfunc_call_kernel_getpeername(args);
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c b/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c
index 83753b00a556..5c3614333b01 100644
--- a/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c
+++ b/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c
@@ -1,24 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright (c) 2021 Facebook */
-#include <string.h>
-#include <linux/tcp.h>
-#include <netinet/in.h>
-#include <linux/bpf.h>
-#include <bpf/bpf_helpers.h>
-#include "bpf_tcp_helpers.h"
+#include "bpf_tracing_net.h"
 
 char _license[] SEC("license") = "GPL";
 
 __s32 page_size = 0;
 
+const char cc_reno[TCP_CA_NAME_MAX] = "reno";
+const char cc_cubic[TCP_CA_NAME_MAX] = "cubic";
+
 SEC("cgroup/setsockopt")
 int sockopt_qos_to_cc(struct bpf_sockopt *ctx)
 {
 	void *optval_end = ctx->optval_end;
 	int *optval = ctx->optval;
 	char buf[TCP_CA_NAME_MAX];
-	char cc_reno[TCP_CA_NAME_MAX] = "reno";
-	char cc_cubic[TCP_CA_NAME_MAX] = "cubic";
 
 	if (ctx->level != SOL_IPV6 || ctx->optname != IPV6_TCLASS)
 		goto out;
@@ -29,11 +25,11 @@ int sockopt_qos_to_cc(struct bpf_sockopt *ctx)
 	if (bpf_getsockopt(ctx->sk, SOL_TCP, TCP_CONGESTION, &buf, sizeof(buf)))
 		return 0;
 
-	if (!tcp_cc_eq(buf, cc_cubic))
+	if (bpf_strncmp(buf, sizeof(buf), cc_cubic))
 		return 0;
 
 	if (*optval == 0x2d) {
-		if (bpf_setsockopt(ctx->sk, SOL_TCP, TCP_CONGESTION, &cc_reno,
+		if (bpf_setsockopt(ctx->sk, SOL_TCP, TCP_CONGESTION, (void *)&cc_reno,
 				sizeof(cc_reno)))
 			return 0;
 	}
diff --git a/tools/testing/selftests/bpf/progs/struct_ops_forgotten_cb.c b/tools/testing/selftests/bpf/progs/struct_ops_forgotten_cb.c
new file mode 100644
index 000000000000..3c822103bd40
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/struct_ops_forgotten_cb.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+#include <vmlinux.h>
+#include <bpf/bpf_tracing.h>
+#include "../bpf_testmod/bpf_testmod.h"
+
+char _license[] SEC("license") = "GPL";
+
+SEC("struct_ops/test_1")
+int BPF_PROG(test_1_forgotten)
+{
+	return 0;
+}
+
+SEC(".struct_ops.link")
+struct bpf_testmod_ops ops = {
+	/* we forgot to reference test_1_forgotten above, oops */
+};
+
diff --git a/tools/testing/selftests/bpf/progs/struct_ops_module.c b/tools/testing/selftests/bpf/progs/struct_ops_module.c
index 026cabfa7f1f..4c56d4a9d9f4 100644
--- a/tools/testing/selftests/bpf/progs/struct_ops_module.c
+++ b/tools/testing/selftests/bpf/progs/struct_ops_module.c
@@ -23,7 +23,7 @@ void BPF_PROG(test_2, int a, int b)
 	test_2_result = a + b;
 }
 
-SEC("struct_ops/test_3")
+SEC("?struct_ops/test_3")
 int BPF_PROG(test_3, int a, int b)
 {
 	test_2_result = a + b + 3;
@@ -54,3 +54,37 @@ struct bpf_testmod_ops___v2 testmod_2 = {
 	.test_1 = (void *)test_1,
 	.test_2 = (void *)test_2_v2,
 };
+
+struct bpf_testmod_ops___zeroed {
+	int (*test_1)(void);
+	void (*test_2)(int a, int b);
+	int (*test_maybe_null)(int dummy, struct task_struct *task);
+	void (*zeroed_op)(int a, int b);
+	int zeroed;
+};
+
+SEC("struct_ops/test_3")
+int BPF_PROG(zeroed_op)
+{
+	return 1;
+}
+
+SEC(".struct_ops.link")
+struct bpf_testmod_ops___zeroed testmod_zeroed = {
+	.test_1 = (void *)test_1,
+	.test_2 = (void *)test_2_v2,
+	.zeroed_op = (void *)zeroed_op,
+};
+
+struct bpf_testmod_ops___incompatible {
+	int (*test_1)(void);
+	void (*test_2)(int *a);
+	int data;
+};
+
+SEC(".struct_ops.link")
+struct bpf_testmod_ops___incompatible testmod_incompatible = {
+	.test_1 = (void *)test_1,
+	.test_2 = (void *)test_2,
+	.data = 3,
+};
diff --git a/tools/testing/selftests/bpf/progs/struct_ops_nulled_out_cb.c b/tools/testing/selftests/bpf/progs/struct_ops_nulled_out_cb.c
new file mode 100644
index 000000000000..fa2021388485
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/struct_ops_nulled_out_cb.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+#include <vmlinux.h>
+#include <bpf/bpf_tracing.h>
+#include "../bpf_testmod/bpf_testmod.h"
+
+char _license[] SEC("license") = "GPL";
+
+int rand;
+int arr[1];
+
+SEC("struct_ops/test_1")
+int BPF_PROG(test_1_turn_off)
+{
+	return arr[rand]; /* potentially way out of range access */
+}
+
+SEC(".struct_ops.link")
+struct bpf_testmod_ops ops = {
+	.test_1 = (void *)test_1_turn_off,
+};
+
diff --git a/tools/testing/selftests/bpf/progs/task_kfunc_common.h b/tools/testing/selftests/bpf/progs/task_kfunc_common.h
index 41f2d44f49cb..6720c4b5be41 100644
--- a/tools/testing/selftests/bpf/progs/task_kfunc_common.h
+++ b/tools/testing/selftests/bpf/progs/task_kfunc_common.h
@@ -13,7 +13,7 @@ struct __tasks_kfunc_map_value {
 	struct task_struct __kptr * task;
 };
 
-struct hash_map {
+struct {
 	__uint(type, BPF_MAP_TYPE_HASH);
 	__type(key, int);
 	__type(value, struct __tasks_kfunc_map_value);
diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c b/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c
index 7bb872fb22dd..0016c90e9c13 100644
--- a/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c
+++ b/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c
@@ -1,24 +1,18 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include "vmlinux.h"
-
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
 char _license[] SEC("license") = "GPL";
 
-static inline struct tcp_sock *tcp_sk(const struct sock *sk)
-{
-	return (struct tcp_sock *)sk;
-}
-
-SEC("struct_ops/incompl_cong_ops_ssthresh")
+SEC("struct_ops")
 __u32 BPF_PROG(incompl_cong_ops_ssthresh, struct sock *sk)
 {
 	return tcp_sk(sk)->snd_ssthresh;
 }
 
-SEC("struct_ops/incompl_cong_ops_undo_cwnd")
+SEC("struct_ops")
 __u32 BPF_PROG(incompl_cong_ops_undo_cwnd, struct sock *sk)
 {
 	return tcp_sk(sk)->snd_cwnd;
diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_kfunc.c b/tools/testing/selftests/bpf/progs/tcp_ca_kfunc.c
new file mode 100644
index 000000000000..f95862f570b7
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/tcp_ca_kfunc.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Facebook */
+
+#include "vmlinux.h"
+#include <bpf/bpf_tracing.h>
+
+extern void bbr_init(struct sock *sk) __ksym;
+extern void bbr_main(struct sock *sk, u32 ack, int flag, const struct rate_sample *rs) __ksym;
+extern u32 bbr_sndbuf_expand(struct sock *sk) __ksym;
+extern u32 bbr_undo_cwnd(struct sock *sk) __ksym;
+extern void bbr_cwnd_event(struct sock *sk, enum tcp_ca_event event) __ksym;
+extern u32 bbr_ssthresh(struct sock *sk) __ksym;
+extern u32 bbr_min_tso_segs(struct sock *sk) __ksym;
+extern void bbr_set_state(struct sock *sk, u8 new_state) __ksym;
+
+extern void dctcp_init(struct sock *sk) __ksym;
+extern void dctcp_update_alpha(struct sock *sk, u32 flags) __ksym;
+extern void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) __ksym;
+extern u32 dctcp_ssthresh(struct sock *sk) __ksym;
+extern u32 dctcp_cwnd_undo(struct sock *sk) __ksym;
+extern void dctcp_state(struct sock *sk, u8 new_state) __ksym;
+
+extern void cubictcp_init(struct sock *sk) __ksym;
+extern u32 cubictcp_recalc_ssthresh(struct sock *sk) __ksym;
+extern void cubictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked) __ksym;
+extern void cubictcp_state(struct sock *sk, u8 new_state) __ksym;
+extern void cubictcp_cwnd_event(struct sock *sk, enum tcp_ca_event event) __ksym;
+extern void cubictcp_acked(struct sock *sk, const struct ack_sample *sample) __ksym;
+
+SEC("struct_ops")
+void BPF_PROG(init, struct sock *sk)
+{
+	bbr_init(sk);
+	dctcp_init(sk);
+	cubictcp_init(sk);
+}
+
+SEC("struct_ops")
+void BPF_PROG(in_ack_event, struct sock *sk, u32 flags)
+{
+	dctcp_update_alpha(sk, flags);
+}
+
+SEC("struct_ops")
+void BPF_PROG(cong_control, struct sock *sk, u32 ack, int flag, const struct rate_sample *rs)
+{
+	bbr_main(sk, ack, flag, rs);
+}
+
+SEC("struct_ops")
+void BPF_PROG(cong_avoid, struct sock *sk, u32 ack, u32 acked)
+{
+	cubictcp_cong_avoid(sk, ack, acked);
+}
+
+SEC("struct_ops")
+u32 BPF_PROG(sndbuf_expand, struct sock *sk)
+{
+	return bbr_sndbuf_expand(sk);
+}
+
+SEC("struct_ops")
+u32 BPF_PROG(undo_cwnd, struct sock *sk)
+{
+	bbr_undo_cwnd(sk);
+	return dctcp_cwnd_undo(sk);
+}
+
+SEC("struct_ops")
+void BPF_PROG(cwnd_event, struct sock *sk, enum tcp_ca_event event)
+{
+	bbr_cwnd_event(sk, event);
+	dctcp_cwnd_event(sk, event);
+	cubictcp_cwnd_event(sk, event);
+}
+
+SEC("struct_ops")
+u32 BPF_PROG(ssthresh, struct sock *sk)
+{
+	bbr_ssthresh(sk);
+	dctcp_ssthresh(sk);
+	return cubictcp_recalc_ssthresh(sk);
+}
+
+SEC("struct_ops")
+u32 BPF_PROG(min_tso_segs, struct sock *sk)
+{
+	return bbr_min_tso_segs(sk);
+}
+
+SEC("struct_ops")
+void BPF_PROG(set_state, struct sock *sk, u8 new_state)
+{
+	bbr_set_state(sk, new_state);
+	dctcp_state(sk, new_state);
+	cubictcp_state(sk, new_state);
+}
+
+SEC("struct_ops")
+void BPF_PROG(pkts_acked, struct sock *sk, const struct ack_sample *sample)
+{
+	cubictcp_acked(sk, sample);
+}
+
+SEC(".struct_ops")
+struct tcp_congestion_ops tcp_ca_kfunc = {
+	.init		= (void *)init,
+	.in_ack_event	= (void *)in_ack_event,
+	.cong_control	= (void *)cong_control,
+	.cong_avoid	= (void *)cong_avoid,
+	.sndbuf_expand	= (void *)sndbuf_expand,
+	.undo_cwnd	= (void *)undo_cwnd,
+	.cwnd_event	= (void *)cwnd_event,
+	.ssthresh	= (void *)ssthresh,
+	.min_tso_segs	= (void *)min_tso_segs,
+	.set_state	= (void *)set_state,
+	.pkts_acked     = (void *)pkts_acked,
+	.name		= "tcp_ca_kfunc",
+};
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_unsupp_cong_op.c b/tools/testing/selftests/bpf/progs/tcp_ca_unsupp_cong_op.c
index c06f4a41c21a..54f916a931c6 100644
--- a/tools/testing/selftests/bpf/progs/tcp_ca_unsupp_cong_op.c
+++ b/tools/testing/selftests/bpf/progs/tcp_ca_unsupp_cong_op.c
@@ -7,7 +7,7 @@
 
 char _license[] SEC("license") = "GPL";
 
-SEC("struct_ops/unsupp_cong_op_get_info")
+SEC("struct_ops")
 size_t BPF_PROG(unsupp_cong_op_get_info, struct sock *sk, u32 ext, int *attr,
 		union tcp_cc_info *info)
 {
diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_update.c b/tools/testing/selftests/bpf/progs/tcp_ca_update.c
index b93a0ed33057..e4bd82bc0d01 100644
--- a/tools/testing/selftests/bpf/progs/tcp_ca_update.c
+++ b/tools/testing/selftests/bpf/progs/tcp_ca_update.c
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include "vmlinux.h"
-
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
@@ -10,36 +9,31 @@ char _license[] SEC("license") = "GPL";
 int ca1_cnt = 0;
 int ca2_cnt = 0;
 
-static inline struct tcp_sock *tcp_sk(const struct sock *sk)
-{
-	return (struct tcp_sock *)sk;
-}
-
-SEC("struct_ops/ca_update_1_init")
+SEC("struct_ops")
 void BPF_PROG(ca_update_1_init, struct sock *sk)
 {
 	ca1_cnt++;
 }
 
-SEC("struct_ops/ca_update_2_init")
+SEC("struct_ops")
 void BPF_PROG(ca_update_2_init, struct sock *sk)
 {
 	ca2_cnt++;
 }
 
-SEC("struct_ops/ca_update_cong_control")
+SEC("struct_ops")
 void BPF_PROG(ca_update_cong_control, struct sock *sk,
 	      const struct rate_sample *rs)
 {
 }
 
-SEC("struct_ops/ca_update_ssthresh")
+SEC("struct_ops")
 __u32 BPF_PROG(ca_update_ssthresh, struct sock *sk)
 {
 	return tcp_sk(sk)->snd_ssthresh;
 }
 
-SEC("struct_ops/ca_update_undo_cwnd")
+SEC("struct_ops")
 __u32 BPF_PROG(ca_update_undo_cwnd, struct sock *sk)
 {
 	return tcp_sk(sk)->snd_cwnd;
diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c b/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c
index 0724a79cec78..a58b5194fc89 100644
--- a/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c
+++ b/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include "vmlinux.h"
-
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
@@ -11,22 +10,17 @@ char _license[] SEC("license") = "GPL";
 
 #define min(a, b) ((a) < (b) ? (a) : (b))
 
-static inline struct tcp_sock *tcp_sk(const struct sock *sk)
-{
-	return (struct tcp_sock *)sk;
-}
-
-static inline unsigned int tcp_left_out(const struct tcp_sock *tp)
+static unsigned int tcp_left_out(const struct tcp_sock *tp)
 {
 	return tp->sacked_out + tp->lost_out;
 }
 
-static inline unsigned int tcp_packets_in_flight(const struct tcp_sock *tp)
+static unsigned int tcp_packets_in_flight(const struct tcp_sock *tp)
 {
 	return tp->packets_out - tcp_left_out(tp) + tp->retrans_out;
 }
 
-SEC("struct_ops/write_sk_pacing_init")
+SEC("struct_ops")
 void BPF_PROG(write_sk_pacing_init, struct sock *sk)
 {
 #ifdef ENABLE_ATOMICS_TESTS
@@ -37,7 +31,7 @@ void BPF_PROG(write_sk_pacing_init, struct sock *sk)
 #endif
 }
 
-SEC("struct_ops/write_sk_pacing_cong_control")
+SEC("struct_ops")
 void BPF_PROG(write_sk_pacing_cong_control, struct sock *sk,
 	      const struct rate_sample *rs)
 {
@@ -49,13 +43,13 @@ void BPF_PROG(write_sk_pacing_cong_control, struct sock *sk,
 	tp->app_limited = (tp->delivered + tcp_packets_in_flight(tp)) ?: 1;
 }
 
-SEC("struct_ops/write_sk_pacing_ssthresh")
+SEC("struct_ops")
 __u32 BPF_PROG(write_sk_pacing_ssthresh, struct sock *sk)
 {
 	return tcp_sk(sk)->snd_ssthresh;
 }
 
-SEC("struct_ops/write_sk_pacing_undo_cwnd")
+SEC("struct_ops")
 __u32 BPF_PROG(write_sk_pacing_undo_cwnd, struct sock *sk)
 {
 	return tcp_sk(sk)->snd_cwnd;
diff --git a/tools/testing/selftests/bpf/progs/tcp_rtt.c b/tools/testing/selftests/bpf/progs/tcp_rtt.c
index 0988d79f1587..42c729f85524 100644
--- a/tools/testing/selftests/bpf/progs/tcp_rtt.c
+++ b/tools/testing/selftests/bpf/progs/tcp_rtt.c
@@ -10,6 +10,9 @@ struct tcp_rtt_storage {
 	__u32 delivered;
 	__u32 delivered_ce;
 	__u32 icsk_retransmits;
+
+	__u32 mrtt_us;	/* args[0] */
+	__u32 srtt;	/* args[1] */
 };
 
 struct {
@@ -55,5 +58,8 @@ int _sockops(struct bpf_sock_ops *ctx)
 	storage->delivered_ce = tcp_sk->delivered_ce;
 	storage->icsk_retransmits = tcp_sk->icsk_retransmits;
 
+	storage->mrtt_us = ctx->args[0];
+	storage->srtt = ctx->args[1];
+
 	return 1;
 }
diff --git a/tools/testing/selftests/bpf/progs/test_bpf_cookie.c b/tools/testing/selftests/bpf/progs/test_bpf_cookie.c
index 5a3a80f751c4..c83142b55f47 100644
--- a/tools/testing/selftests/bpf/progs/test_bpf_cookie.c
+++ b/tools/testing/selftests/bpf/progs/test_bpf_cookie.c
@@ -15,6 +15,8 @@ __u64 uprobe_res;
 __u64 uretprobe_res;
 __u64 tp_res;
 __u64 pe_res;
+__u64 raw_tp_res;
+__u64 tp_btf_res;
 __u64 fentry_res;
 __u64 fexit_res;
 __u64 fmod_ret_res;
@@ -87,6 +89,20 @@ int handle_pe(struct pt_regs *ctx)
 	return 0;
 }
 
+SEC("raw_tp/sys_enter")
+int handle_raw_tp(void *ctx)
+{
+	update(ctx, &raw_tp_res);
+	return 0;
+}
+
+SEC("tp_btf/sys_enter")
+int handle_tp_btf(void *ctx)
+{
+	update(ctx, &tp_btf_res);
+	return 0;
+}
+
 SEC("fentry/bpf_fentry_test1")
 int BPF_PROG(fentry_test1, int a)
 {
diff --git a/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c b/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c
index e2bea4da194b..f0759efff6ef 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c
@@ -1,19 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright (c) 2020 Facebook */
 
-#include <string.h>
-#include <errno.h>
-#include <netinet/in.h>
-#include <linux/stddef.h>
-#include <linux/bpf.h>
-#include <linux/ipv6.h>
-#include <linux/tcp.h>
-#include <linux/if_ether.h>
-#include <linux/pkt_cls.h>
-
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
-#include "bpf_tcp_helpers.h"
+
+#ifndef ENOENT
+#define ENOENT 2
+#endif
 
 struct sockaddr_in6 srv_sa6 = {};
 __u16 listen_tp_sport = 0;
diff --git a/tools/testing/selftests/bpf/progs/test_global_func10.c b/tools/testing/selftests/bpf/progs/test_global_func10.c
index 8fba3f3649e2..5da001ca57a5 100644
--- a/tools/testing/selftests/bpf/progs/test_global_func10.c
+++ b/tools/testing/selftests/bpf/progs/test_global_func10.c
@@ -4,6 +4,10 @@
 #include <bpf/bpf_helpers.h>
 #include "bpf_misc.h"
 
+#if !defined(__clang__)
+#pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
+#endif
+
 struct Small {
 	long x;
 };
diff --git a/tools/testing/selftests/bpf/progs/test_lwt_redirect.c b/tools/testing/selftests/bpf/progs/test_lwt_redirect.c
index 8c895122f293..83439b87b766 100644
--- a/tools/testing/selftests/bpf/progs/test_lwt_redirect.c
+++ b/tools/testing/selftests/bpf/progs/test_lwt_redirect.c
@@ -3,7 +3,7 @@
 #include <bpf/bpf_endian.h>
 #include <bpf/bpf_helpers.h>
 #include <linux/ip.h>
-#include "bpf_tracing_net.h"
+#include <linux/if_ether.h>
 
 /* We don't care about whether the packet can be received by network stack.
  * Just care if the packet is sent to the correct device at correct direction
diff --git a/tools/testing/selftests/bpf/progs/test_module_attach.c b/tools/testing/selftests/bpf/progs/test_module_attach.c
index 8a1b50f3a002..cc1a012d038f 100644
--- a/tools/testing/selftests/bpf/progs/test_module_attach.c
+++ b/tools/testing/selftests/bpf/progs/test_module_attach.c
@@ -73,6 +73,29 @@ int BPF_PROG(handle_fentry_manual,
 	return 0;
 }
 
+__u32 fentry_explicit_read_sz = 0;
+
+SEC("fentry/bpf_testmod:bpf_testmod_test_read")
+int BPF_PROG(handle_fentry_explicit,
+	     struct file *file, struct kobject *kobj,
+	     struct bin_attribute *bin_attr, char *buf, loff_t off, size_t len)
+{
+	fentry_explicit_read_sz = len;
+	return 0;
+}
+
+
+__u32 fentry_explicit_manual_read_sz = 0;
+
+SEC("fentry")
+int BPF_PROG(handle_fentry_explicit_manual,
+	     struct file *file, struct kobject *kobj,
+	     struct bin_attribute *bin_attr, char *buf, loff_t off, size_t len)
+{
+	fentry_explicit_manual_read_sz = len;
+	return 0;
+}
+
 __u32 fexit_read_sz = 0;
 int fexit_ret = 0;
 
diff --git a/tools/testing/selftests/bpf/progs/test_ns_current_pid_tgid.c b/tools/testing/selftests/bpf/progs/test_ns_current_pid_tgid.c
index 0763d49f9c42..386315afad65 100644
--- a/tools/testing/selftests/bpf/progs/test_ns_current_pid_tgid.c
+++ b/tools/testing/selftests/bpf/progs/test_ns_current_pid_tgid.c
@@ -5,23 +5,48 @@
 #include <stdint.h>
 #include <bpf/bpf_helpers.h>
 
+struct {
+	__uint(type, BPF_MAP_TYPE_SOCKMAP);
+	__uint(max_entries, 2);
+	__type(key, __u32);
+	__type(value, __u32);
+} sock_map SEC(".maps");
+
 __u64 user_pid = 0;
 __u64 user_tgid = 0;
 __u64 dev = 0;
 __u64 ino = 0;
 
-SEC("tracepoint/syscalls/sys_enter_nanosleep")
-int handler(const void *ctx)
+static void get_pid_tgid(void)
 {
 	struct bpf_pidns_info nsdata;
 
 	if (bpf_get_ns_current_pid_tgid(dev, ino, &nsdata, sizeof(struct bpf_pidns_info)))
-		return 0;
+		return;
 
 	user_pid = nsdata.pid;
 	user_tgid = nsdata.tgid;
+}
 
+SEC("?tracepoint/syscalls/sys_enter_nanosleep")
+int tp_handler(const void *ctx)
+{
+	get_pid_tgid();
 	return 0;
 }
 
+SEC("?cgroup/bind4")
+int cgroup_bind4(struct bpf_sock_addr *ctx)
+{
+	get_pid_tgid();
+	return 1;
+}
+
+SEC("?sk_msg")
+int sk_msg(struct sk_msg_md *msg)
+{
+	get_pid_tgid();
+	return SK_PASS;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_ringbuf_n.c b/tools/testing/selftests/bpf/progs/test_ringbuf_n.c
new file mode 100644
index 000000000000..8669eb42dbe0
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_ringbuf_n.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2024 Andrea Righi <andrea.righi@canonical.com>
+
+#include <linux/bpf.h>
+#include <sched.h>
+#include <unistd.h>
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+
+char _license[] SEC("license") = "GPL";
+
+#define TASK_COMM_LEN 16
+
+struct sample {
+	int pid;
+	long value;
+	char comm[16];
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_RINGBUF);
+} ringbuf SEC(".maps");
+
+int pid = 0;
+long value = 0;
+
+SEC("fentry/" SYS_PREFIX "sys_getpgid")
+int test_ringbuf_n(void *ctx)
+{
+	int cur_pid = bpf_get_current_pid_tgid() >> 32;
+	struct sample *sample;
+
+	if (cur_pid != pid)
+		return 0;
+
+	sample = bpf_ringbuf_reserve(&ringbuf, sizeof(*sample), 0);
+	if (!sample)
+		return 0;
+
+	sample->pid = pid;
+	sample->value = value;
+	bpf_get_current_comm(sample->comm, sizeof(sample->comm));
+
+	bpf_ringbuf_submit(sample, 0);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/progs/test_skmsg_load_helpers.c b/tools/testing/selftests/bpf/progs/test_skmsg_load_helpers.c
index 45e8fc75a739..996b177324ba 100644
--- a/tools/testing/selftests/bpf/progs/test_skmsg_load_helpers.c
+++ b/tools/testing/selftests/bpf/progs/test_skmsg_load_helpers.c
@@ -24,8 +24,7 @@ struct {
 	__type(value, __u64);
 } socket_storage SEC(".maps");
 
-SEC("sk_msg")
-int prog_msg_verdict(struct sk_msg_md *msg)
+static int prog_msg_verdict_common(struct sk_msg_md *msg)
 {
 	struct task_struct *task = (struct task_struct *)bpf_get_current_task();
 	int verdict = SK_PASS;
@@ -44,4 +43,28 @@ int prog_msg_verdict(struct sk_msg_md *msg)
 	return verdict;
 }
 
+SEC("sk_msg")
+int prog_msg_verdict(struct sk_msg_md *msg)
+{
+	return prog_msg_verdict_common(msg);
+}
+
+SEC("sk_msg")
+int prog_msg_verdict_clone(struct sk_msg_md *msg)
+{
+	return prog_msg_verdict_common(msg);
+}
+
+SEC("sk_msg")
+int prog_msg_verdict_clone2(struct sk_msg_md *msg)
+{
+	return prog_msg_verdict_common(msg);
+}
+
+SEC("sk_skb/stream_verdict")
+int prog_skb_verdict(struct __sk_buff *skb)
+{
+	return SK_PASS;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_sock_fields.c b/tools/testing/selftests/bpf/progs/test_sock_fields.c
index f75e531bf36f..196844be349c 100644
--- a/tools/testing/selftests/bpf/progs/test_sock_fields.c
+++ b/tools/testing/selftests/bpf/progs/test_sock_fields.c
@@ -7,7 +7,6 @@
 
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
-#include "bpf_tcp_helpers.h"
 
 enum bpf_linum_array_idx {
 	EGRESS_LINUM_IDX,
@@ -42,6 +41,10 @@ struct {
 	__type(value, struct bpf_spinlock_cnt);
 } sk_pkt_out_cnt10 SEC(".maps");
 
+struct tcp_sock {
+	__u32	lsndtime;
+} __attribute__((preserve_access_index));
+
 struct bpf_tcp_sock listen_tp = {};
 struct sockaddr_in6 srv_sa6 = {};
 struct bpf_tcp_sock cli_tp = {};
diff --git a/tools/testing/selftests/bpf/progs/test_sockmap_pass_prog.c b/tools/testing/selftests/bpf/progs/test_sockmap_pass_prog.c
index 1d86a717a290..69aacc96db36 100644
--- a/tools/testing/selftests/bpf/progs/test_sockmap_pass_prog.c
+++ b/tools/testing/selftests/bpf/progs/test_sockmap_pass_prog.c
@@ -23,10 +23,25 @@ struct {
 	__type(value, int);
 } sock_map_msg SEC(".maps");
 
-SEC("sk_skb")
+SEC("sk_skb/stream_verdict")
 int prog_skb_verdict(struct __sk_buff *skb)
 {
 	return SK_PASS;
 }
 
+int clone_called;
+
+SEC("sk_skb/stream_verdict")
+int prog_skb_verdict_clone(struct __sk_buff *skb)
+{
+	clone_called = 1;
+	return SK_PASS;
+}
+
+SEC("sk_skb/stream_parser")
+int prog_skb_parser(struct __sk_buff *skb)
+{
+	return SK_PASS;
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_sockmap_skb_verdict_attach.c b/tools/testing/selftests/bpf/progs/test_sockmap_skb_verdict_attach.c
index 3c69aa971738..d25b0bb30fc0 100644
--- a/tools/testing/selftests/bpf/progs/test_sockmap_skb_verdict_attach.c
+++ b/tools/testing/selftests/bpf/progs/test_sockmap_skb_verdict_attach.c
@@ -9,7 +9,7 @@ struct {
 	__type(value, __u64);
 } sock_map SEC(".maps");
 
-SEC("sk_skb")
+SEC("sk_skb/verdict")
 int prog_skb_verdict(struct __sk_buff *skb)
 {
 	return SK_DROP;
diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
index a3f3f43fc195..6935f32eeb8f 100644
--- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
@@ -1,18 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <stddef.h>
-#include <string.h>
-#include <netinet/in.h>
-#include <linux/bpf.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/ip.h>
-#include <linux/ipv6.h>
-#include <linux/types.h>
-#include <linux/socket.h>
-#include <linux/tcp.h>
+#include "bpf_tracing_net.h"
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
-#include "bpf_tcp_helpers.h"
 #include "test_tcpbpf.h"
 
 struct tcpbpf_globals global = {};
diff --git a/tools/testing/selftests/bpf/progs/test_tunnel_kern.c b/tools/testing/selftests/bpf/progs/test_tunnel_kern.c
index 3e436e6f7312..3f5abcf3ff13 100644
--- a/tools/testing/selftests/bpf/progs/test_tunnel_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tunnel_kern.c
@@ -567,12 +567,18 @@ int ip6vxlan_get_tunnel_src(struct __sk_buff *skb)
 	return TC_ACT_OK;
 }
 
+struct local_geneve_opt {
+	struct geneve_opt gopt;
+	int data;
+};
+
 SEC("tc")
 int geneve_set_tunnel(struct __sk_buff *skb)
 {
 	int ret;
 	struct bpf_tunnel_key key;
-	struct geneve_opt gopt;
+	struct local_geneve_opt local_gopt;
+	struct geneve_opt *gopt = (struct geneve_opt *) &local_gopt;
 
 	__builtin_memset(&key, 0x0, sizeof(key));
 	key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */
@@ -580,14 +586,14 @@ int geneve_set_tunnel(struct __sk_buff *skb)
 	key.tunnel_tos = 0;
 	key.tunnel_ttl = 64;
 
-	__builtin_memset(&gopt, 0x0, sizeof(gopt));
-	gopt.opt_class = bpf_htons(0x102); /* Open Virtual Networking (OVN) */
-	gopt.type = 0x08;
-	gopt.r1 = 0;
-	gopt.r2 = 0;
-	gopt.r3 = 0;
-	gopt.length = 2; /* 4-byte multiple */
-	*(int *) &gopt.opt_data = bpf_htonl(0xdeadbeef);
+	__builtin_memset(gopt, 0x0, sizeof(local_gopt));
+	gopt->opt_class = bpf_htons(0x102); /* Open Virtual Networking (OVN) */
+	gopt->type = 0x08;
+	gopt->r1 = 0;
+	gopt->r2 = 0;
+	gopt->r3 = 0;
+	gopt->length = 2; /* 4-byte multiple */
+	*(int *) &gopt->opt_data = bpf_htonl(0xdeadbeef);
 
 	ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key),
 				     BPF_F_ZERO_CSUM_TX);
@@ -596,7 +602,7 @@ int geneve_set_tunnel(struct __sk_buff *skb)
 		return TC_ACT_SHOT;
 	}
 
-	ret = bpf_skb_set_tunnel_opt(skb, &gopt, sizeof(gopt));
+	ret = bpf_skb_set_tunnel_opt(skb, gopt, sizeof(local_gopt));
 	if (ret < 0) {
 		log_err(ret);
 		return TC_ACT_SHOT;
@@ -631,7 +637,8 @@ SEC("tc")
 int ip6geneve_set_tunnel(struct __sk_buff *skb)
 {
 	struct bpf_tunnel_key key;
-	struct geneve_opt gopt;
+	struct local_geneve_opt local_gopt;
+	struct geneve_opt *gopt = (struct geneve_opt *) &local_gopt;
 	int ret;
 
 	__builtin_memset(&key, 0x0, sizeof(key));
@@ -647,16 +654,16 @@ int ip6geneve_set_tunnel(struct __sk_buff *skb)
 		return TC_ACT_SHOT;
 	}
 
-	__builtin_memset(&gopt, 0x0, sizeof(gopt));
-	gopt.opt_class = bpf_htons(0x102); /* Open Virtual Networking (OVN) */
-	gopt.type = 0x08;
-	gopt.r1 = 0;
-	gopt.r2 = 0;
-	gopt.r3 = 0;
-	gopt.length = 2; /* 4-byte multiple */
-	*(int *) &gopt.opt_data = bpf_htonl(0xfeedbeef);
+	__builtin_memset(gopt, 0x0, sizeof(local_gopt));
+	gopt->opt_class = bpf_htons(0x102); /* Open Virtual Networking (OVN) */
+	gopt->type = 0x08;
+	gopt->r1 = 0;
+	gopt->r2 = 0;
+	gopt->r3 = 0;
+	gopt->length = 2; /* 4-byte multiple */
+	*(int *) &gopt->opt_data = bpf_htonl(0xfeedbeef);
 
-	ret = bpf_skb_set_tunnel_opt(skb, &gopt, sizeof(gopt));
+	ret = bpf_skb_set_tunnel_opt(skb, gopt, sizeof(gopt));
 	if (ret < 0) {
 		log_err(ret);
 		return TC_ACT_SHOT;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c
index 5c7e4758a0ca..fad94e41cef9 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c
@@ -318,6 +318,14 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval,
 	return true;
 }
 
+#ifndef __clang__
+#pragma GCC push_options
+/* GCC optimization collapses functions and increases the number of arguments
+ * beyond the compatible amount supported by BPF.
+ */
+#pragma GCC optimize("-fno-ipa-sra")
+#endif
+
 static __attribute__ ((noinline))
 bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval,
 	      struct packet_description *pckt,
@@ -372,6 +380,10 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval,
 	return true;
 }
 
+#ifndef __clang__
+#pragma GCC pop_options
+#endif
+
 static __attribute__ ((noinline))
 int swap_mac_and_send(void *data, void *data_end)
 {
@@ -588,12 +600,13 @@ static void connection_table_lookup(struct real_definition **real,
 __attribute__ ((noinline))
 static int process_l3_headers_v6(struct packet_description *pckt,
 				 __u8 *protocol, __u64 off,
-				 __u16 *pkt_bytes, void *data,
-				 void *data_end)
+				 __u16 *pkt_bytes, void *extra_args[2])
 {
 	struct ipv6hdr *ip6h;
 	__u64 iph_len;
 	int action;
+	void *data = extra_args[0];
+	void *data_end = extra_args[1];
 
 	ip6h = data + off;
 	if (ip6h + 1 > data_end)
@@ -619,11 +632,12 @@ static int process_l3_headers_v6(struct packet_description *pckt,
 __attribute__ ((noinline))
 static int process_l3_headers_v4(struct packet_description *pckt,
 				 __u8 *protocol, __u64 off,
-				 __u16 *pkt_bytes, void *data,
-				 void *data_end)
+				 __u16 *pkt_bytes, void *extra_args[2])
 {
 	struct iphdr *iph;
 	int action;
+	void *data = extra_args[0];
+	void *data_end = extra_args[1];
 
 	iph = data + off;
 	if (iph + 1 > data_end)
@@ -666,13 +680,14 @@ static int process_packet(void *data, __u64 off, void *data_end,
 	__u8 protocol;
 	__u32 vip_num;
 	int action;
+	void *extra_args[2] = { data, data_end };
 
 	if (is_ipv6)
 		action = process_l3_headers_v6(&pckt, &protocol, off,
-					       &pkt_bytes, data, data_end);
+					       &pkt_bytes, extra_args);
 	else
 		action = process_l3_headers_v4(&pckt, &protocol, off,
-					       &pkt_bytes, data, data_end);
+					       &pkt_bytes, extra_args);
 	if (action >= 0)
 		return action;
 	protocol = pckt.flow.proto;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
index f3ec8086482d..a7588302268d 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
@@ -160,7 +160,7 @@ int  xdp_prognum1(struct xdp_md *ctx)
 
 		/* Modifying VLAN, preserve top 4 bits */
 		vlan_hdr->h_vlan_TCI =
-			bpf_htons((bpf_ntohs(vlan_hdr->h_vlan_TCI) & 0xf000)
+			bpf_htons((bpf_ntohs(vlan_hdr->h_vlan_TCI) & 0xf000U)
 				  | TO_VLAN);
 	}
 
diff --git a/tools/testing/selftests/bpf/progs/timer.c b/tools/testing/selftests/bpf/progs/timer.c
index f615da97df26..4c677c001258 100644
--- a/tools/testing/selftests/bpf/progs/timer.c
+++ b/tools/testing/selftests/bpf/progs/timer.c
@@ -2,9 +2,10 @@
 /* Copyright (c) 2021 Facebook */
 #include <linux/bpf.h>
 #include <time.h>
+#include <stdbool.h>
 #include <errno.h>
 #include <bpf/bpf_helpers.h>
-#include "bpf_tcp_helpers.h"
+#include <bpf/bpf_tracing.h>
 
 char _license[] SEC("license") = "GPL";
 struct hmap_elem {
diff --git a/tools/testing/selftests/bpf/progs/timer_failure.c b/tools/testing/selftests/bpf/progs/timer_failure.c
index 0996c2486f05..5a2e9dabf1c6 100644
--- a/tools/testing/selftests/bpf/progs/timer_failure.c
+++ b/tools/testing/selftests/bpf/progs/timer_failure.c
@@ -5,8 +5,8 @@
 #include <time.h>
 #include <errno.h>
 #include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
 #include "bpf_misc.h"
-#include "bpf_tcp_helpers.h"
 
 char _license[] SEC("license") = "GPL";
 
diff --git a/tools/testing/selftests/bpf/progs/timer_mim.c b/tools/testing/selftests/bpf/progs/timer_mim.c
index 2fee7ab105ef..50ebc3f68522 100644
--- a/tools/testing/selftests/bpf/progs/timer_mim.c
+++ b/tools/testing/selftests/bpf/progs/timer_mim.c
@@ -4,7 +4,7 @@
 #include <time.h>
 #include <errno.h>
 #include <bpf/bpf_helpers.h>
-#include "bpf_tcp_helpers.h"
+#include <bpf/bpf_tracing.h>
 
 char _license[] SEC("license") = "GPL";
 struct hmap_elem {
diff --git a/tools/testing/selftests/bpf/progs/timer_mim_reject.c b/tools/testing/selftests/bpf/progs/timer_mim_reject.c
index 5d648e3d8a41..dd3f1ed6d6e6 100644
--- a/tools/testing/selftests/bpf/progs/timer_mim_reject.c
+++ b/tools/testing/selftests/bpf/progs/timer_mim_reject.c
@@ -4,7 +4,7 @@
 #include <time.h>
 #include <errno.h>
 #include <bpf/bpf_helpers.h>
-#include "bpf_tcp_helpers.h"
+#include <bpf/bpf_tracing.h>
 
 char _license[] SEC("license") = "GPL";
 struct hmap_elem {
diff --git a/tools/testing/selftests/bpf/progs/trigger_bench.c b/tools/testing/selftests/bpf/progs/trigger_bench.c
index 5fda43901033..2619ed193c65 100644
--- a/tools/testing/selftests/bpf/progs/trigger_bench.c
+++ b/tools/testing/selftests/bpf/progs/trigger_bench.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2020 Facebook
-
 #include <linux/bpf.h>
 #include <asm/unistd.h>
 #include <bpf/bpf_helpers.h>
@@ -9,82 +8,126 @@
 
 char _license[] SEC("license") = "GPL";
 
-long hits = 0;
+#define CPU_MASK 255
+#define MAX_CPUS (CPU_MASK + 1) /* should match MAX_BUCKETS in benchs/bench_trigger.c */
 
-SEC("tp/syscalls/sys_enter_getpgid")
-int bench_trigger_tp(void *ctx)
+/* matches struct counter in bench.h */
+struct counter {
+	long value;
+} __attribute__((aligned(128)));
+
+struct counter hits[MAX_CPUS];
+
+static __always_inline void inc_counter(void)
+{
+	int cpu = bpf_get_smp_processor_id();
+
+	__sync_add_and_fetch(&hits[cpu & CPU_MASK].value, 1);
+}
+
+SEC("?uprobe")
+int bench_trigger_uprobe(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("raw_tp/sys_enter")
-int BPF_PROG(bench_trigger_raw_tp, struct pt_regs *regs, long id)
+const volatile int batch_iters = 0;
+
+SEC("?raw_tp")
+int trigger_count(void *ctx)
 {
-	if (id == __NR_getpgid)
-		__sync_add_and_fetch(&hits, 1);
+	int i;
+
+	for (i = 0; i < batch_iters; i++)
+		inc_counter();
+
 	return 0;
 }
 
-SEC("kprobe/" SYS_PREFIX "sys_getpgid")
+SEC("?raw_tp")
+int trigger_driver(void *ctx)
+{
+	int i;
+
+	for (i = 0; i < batch_iters; i++)
+		(void)bpf_get_numa_node_id(); /* attach point for benchmarking */
+
+	return 0;
+}
+
+extern int bpf_modify_return_test_tp(int nonce) __ksym __weak;
+
+SEC("?raw_tp")
+int trigger_driver_kfunc(void *ctx)
+{
+	int i;
+
+	for (i = 0; i < batch_iters; i++)
+		(void)bpf_modify_return_test_tp(0); /* attach point for benchmarking */
+
+	return 0;
+}
+
+SEC("?kprobe/bpf_get_numa_node_id")
 int bench_trigger_kprobe(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("kretprobe/" SYS_PREFIX "sys_getpgid")
+SEC("?kretprobe/bpf_get_numa_node_id")
 int bench_trigger_kretprobe(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("kprobe.multi/" SYS_PREFIX "sys_getpgid")
+SEC("?kprobe.multi/bpf_get_numa_node_id")
 int bench_trigger_kprobe_multi(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("kretprobe.multi/" SYS_PREFIX "sys_getpgid")
+SEC("?kretprobe.multi/bpf_get_numa_node_id")
 int bench_trigger_kretprobe_multi(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("fentry/" SYS_PREFIX "sys_getpgid")
+SEC("?fentry/bpf_get_numa_node_id")
 int bench_trigger_fentry(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("fexit/" SYS_PREFIX "sys_getpgid")
+SEC("?fexit/bpf_get_numa_node_id")
 int bench_trigger_fexit(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
 
-SEC("fentry.s/" SYS_PREFIX "sys_getpgid")
-int bench_trigger_fentry_sleep(void *ctx)
+SEC("?fmod_ret/bpf_modify_return_test_tp")
+int bench_trigger_fmodret(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
-	return 0;
+	inc_counter();
+	return -22;
 }
 
-SEC("fmod_ret/" SYS_PREFIX "sys_getpgid")
-int bench_trigger_fmodret(void *ctx)
+SEC("?tp/bpf_test_run/bpf_trigger_tp")
+int bench_trigger_tp(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
-	return -22;
+	inc_counter();
+	return 0;
 }
 
-SEC("uprobe")
-int bench_trigger_uprobe(void *ctx)
+SEC("?raw_tp/bpf_trigger_tp")
+int bench_trigger_rawtp(void *ctx)
 {
-	__sync_add_and_fetch(&hits, 1);
+	inc_counter();
 	return 0;
 }
diff --git a/tools/testing/selftests/bpf/progs/verifier_bounds.c b/tools/testing/selftests/bpf/progs/verifier_bounds.c
index 960998f16306..a0bb7fb40ea5 100644
--- a/tools/testing/selftests/bpf/progs/verifier_bounds.c
+++ b/tools/testing/selftests/bpf/progs/verifier_bounds.c
@@ -886,6 +886,69 @@ l1_%=:	r0 = 0;						\
 }
 
 SEC("socket")
+__description("bounds check for non const xor src dst")
+__success __log_level(2)
+__msg("5: (af) r0 ^= r6                      ; R0_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=431,var_off=(0x0; 0x1af))")
+__naked void non_const_xor_src_dst(void)
+{
+	asm volatile ("					\
+	call %[bpf_get_prandom_u32];                    \
+	r6 = r0;					\
+	call %[bpf_get_prandom_u32];                    \
+	r6 &= 0xaf;					\
+	r0 &= 0x1a0;					\
+	r0 ^= r6;					\
+	exit;						\
+"	:
+	: __imm(bpf_map_lookup_elem),
+	__imm_addr(map_hash_8b),
+	__imm(bpf_get_prandom_u32)
+	: __clobber_all);
+}
+
+SEC("socket")
+__description("bounds check for non const or src dst")
+__success __log_level(2)
+__msg("5: (4f) r0 |= r6                      ; R0_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=431,var_off=(0x0; 0x1af))")
+__naked void non_const_or_src_dst(void)
+{
+	asm volatile ("					\
+	call %[bpf_get_prandom_u32];                    \
+	r6 = r0;					\
+	call %[bpf_get_prandom_u32];                    \
+	r6 &= 0xaf;					\
+	r0 &= 0x1a0;					\
+	r0 |= r6;					\
+	exit;						\
+"	:
+	: __imm(bpf_map_lookup_elem),
+	__imm_addr(map_hash_8b),
+	__imm(bpf_get_prandom_u32)
+	: __clobber_all);
+}
+
+SEC("socket")
+__description("bounds check for non const mul regs")
+__success __log_level(2)
+__msg("5: (2f) r0 *= r6                      ; R0_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=3825,var_off=(0x0; 0xfff))")
+__naked void non_const_mul_regs(void)
+{
+	asm volatile ("					\
+	call %[bpf_get_prandom_u32];                    \
+	r6 = r0;					\
+	call %[bpf_get_prandom_u32];                    \
+	r6 &= 0xff;					\
+	r0 &= 0x0f;					\
+	r0 *= r6;					\
+	exit;						\
+"	:
+	: __imm(bpf_map_lookup_elem),
+	__imm_addr(map_hash_8b),
+	__imm(bpf_get_prandom_u32)
+	: __clobber_all);
+}
+
+SEC("socket")
 __description("bounds checks after 32-bit truncation. test 1")
 __success __failure_unpriv __msg_unpriv("R0 leaks addr")
 __retval(0)
diff --git a/tools/testing/selftests/bpf/progs/verifier_global_subprogs.c b/tools/testing/selftests/bpf/progs/verifier_global_subprogs.c
index baff5ffe9405..a9fc30ed4d73 100644
--- a/tools/testing/selftests/bpf/progs/verifier_global_subprogs.c
+++ b/tools/testing/selftests/bpf/progs/verifier_global_subprogs.c
@@ -8,6 +8,13 @@
 #include "xdp_metadata.h"
 #include "bpf_kfuncs.h"
 
+/* The compiler may be able to detect the access to uninitialized
+   memory in the routines performing out of bound memory accesses and
+   emit warnings about it.  This is the case of GCC. */
+#if !defined(__clang__)
+#pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
+#endif
+
 int arr[1];
 int unkn_idx;
 const volatile bool call_dead_subprog = false;
diff --git a/tools/testing/selftests/bpf/progs/verifier_helper_restricted.c b/tools/testing/selftests/bpf/progs/verifier_helper_restricted.c
index 0ede0ccd090c..059aa716e3d0 100644
--- a/tools/testing/selftests/bpf/progs/verifier_helper_restricted.c
+++ b/tools/testing/selftests/bpf/progs/verifier_helper_restricted.c
@@ -30,7 +30,7 @@ struct {
 
 SEC("kprobe")
 __description("bpf_ktime_get_coarse_ns is forbidden in BPF_PROG_TYPE_KPROBE")
-__failure __msg("unknown func bpf_ktime_get_coarse_ns")
+__failure __msg("program of this type cannot use helper bpf_ktime_get_coarse_ns")
 __naked void in_bpf_prog_type_kprobe_1(void)
 {
 	asm volatile ("					\
@@ -44,7 +44,7 @@ __naked void in_bpf_prog_type_kprobe_1(void)
 
 SEC("tracepoint")
 __description("bpf_ktime_get_coarse_ns is forbidden in BPF_PROG_TYPE_TRACEPOINT")
-__failure __msg("unknown func bpf_ktime_get_coarse_ns")
+__failure __msg("program of this type cannot use helper bpf_ktime_get_coarse_ns")
 __naked void in_bpf_prog_type_tracepoint_1(void)
 {
 	asm volatile ("					\
@@ -58,7 +58,7 @@ __naked void in_bpf_prog_type_tracepoint_1(void)
 
 SEC("perf_event")
 __description("bpf_ktime_get_coarse_ns is forbidden in BPF_PROG_TYPE_PERF_EVENT")
-__failure __msg("unknown func bpf_ktime_get_coarse_ns")
+__failure __msg("program of this type cannot use helper bpf_ktime_get_coarse_ns")
 __naked void bpf_prog_type_perf_event_1(void)
 {
 	asm volatile ("					\
@@ -72,7 +72,7 @@ __naked void bpf_prog_type_perf_event_1(void)
 
 SEC("raw_tracepoint")
 __description("bpf_ktime_get_coarse_ns is forbidden in BPF_PROG_TYPE_RAW_TRACEPOINT")
-__failure __msg("unknown func bpf_ktime_get_coarse_ns")
+__failure __msg("program of this type cannot use helper bpf_ktime_get_coarse_ns")
 __naked void bpf_prog_type_raw_tracepoint_1(void)
 {
 	asm volatile ("					\
diff --git a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c
index 99e561f18f9b..bd676d7e615f 100644
--- a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c
+++ b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c
@@ -318,7 +318,7 @@ int cond_break1(const void *ctx)
 	unsigned long i;
 	unsigned int sum = 0;
 
-	for (i = zero; i < ARR_SZ; cond_break, i++)
+	for (i = zero; i < ARR_SZ && can_loop; i++)
 		sum += i;
 	for (i = zero; i < ARR_SZ; i++) {
 		barrier_var(i);
@@ -336,12 +336,11 @@ int cond_break2(const void *ctx)
 	int i, j;
 	int sum = 0;
 
-	for (i = zero; i < 1000; cond_break, i++)
+	for (i = zero; i < 1000 && can_loop; i++)
 		for (j = zero; j < 1000; j++) {
 			sum += i + j;
 			cond_break;
-		}
-
+	}
 	return sum;
 }
 
@@ -349,7 +348,7 @@ static __noinline int loop(void)
 {
 	int i, sum = 0;
 
-	for (i = zero; i <= 1000000; i++, cond_break)
+	for (i = zero; i <= 1000000 && can_loop; i++)
 		sum += i;
 
 	return sum;
diff --git a/tools/testing/selftests/bpf/progs/verifier_kfunc_prog_types.c b/tools/testing/selftests/bpf/progs/verifier_kfunc_prog_types.c
new file mode 100644
index 000000000000..cb32b0cfc84b
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/verifier_kfunc_prog_types.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Meta Platforms, Inc. and affiliates. */
+
+#include <vmlinux.h>
+#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_helpers.h>
+
+#include "bpf_misc.h"
+#include "cgrp_kfunc_common.h"
+#include "cpumask_common.h"
+#include "task_kfunc_common.h"
+
+char _license[] SEC("license") = "GPL";
+
+/***************
+ * Task kfuncs *
+ ***************/
+
+static void task_kfunc_load_test(void)
+{
+	struct task_struct *current, *ref_1, *ref_2;
+
+	current = bpf_get_current_task_btf();
+	ref_1 = bpf_task_from_pid(current->pid);
+	if (!ref_1)
+		return;
+
+	ref_2 = bpf_task_acquire(ref_1);
+	if (ref_2)
+		bpf_task_release(ref_2);
+	bpf_task_release(ref_1);
+}
+
+SEC("raw_tp")
+__failure __msg("calling kernel function")
+int BPF_PROG(task_kfunc_raw_tp)
+{
+	task_kfunc_load_test();
+	return 0;
+}
+
+SEC("syscall")
+__success
+int BPF_PROG(task_kfunc_syscall)
+{
+	task_kfunc_load_test();
+	return 0;
+}
+
+/*****************
+ * cgroup kfuncs *
+ *****************/
+
+static void cgrp_kfunc_load_test(void)
+{
+	struct cgroup *cgrp, *ref;
+
+	cgrp = bpf_cgroup_from_id(0);
+	if (!cgrp)
+		return;
+
+	ref = bpf_cgroup_acquire(cgrp);
+	if (!ref) {
+		bpf_cgroup_release(cgrp);
+		return;
+	}
+
+	bpf_cgroup_release(ref);
+	bpf_cgroup_release(cgrp);
+}
+
+SEC("raw_tp")
+__failure __msg("calling kernel function")
+int BPF_PROG(cgrp_kfunc_raw_tp)
+{
+	cgrp_kfunc_load_test();
+	return 0;
+}
+
+SEC("syscall")
+__success
+int BPF_PROG(cgrp_kfunc_syscall)
+{
+	cgrp_kfunc_load_test();
+	return 0;
+}
+
+/******************
+ * cpumask kfuncs *
+ ******************/
+
+static void cpumask_kfunc_load_test(void)
+{
+	struct bpf_cpumask *alloc, *ref;
+
+	alloc = bpf_cpumask_create();
+	if (!alloc)
+		return;
+
+	ref = bpf_cpumask_acquire(alloc);
+	bpf_cpumask_set_cpu(0, alloc);
+	bpf_cpumask_test_cpu(0, (const struct cpumask *)ref);
+
+	bpf_cpumask_release(ref);
+	bpf_cpumask_release(alloc);
+}
+
+SEC("raw_tp")
+__failure __msg("calling kernel function")
+int BPF_PROG(cpumask_kfunc_raw_tp)
+{
+	cpumask_kfunc_load_test();
+	return 0;
+}
+
+SEC("syscall")
+__success
+int BPF_PROG(cpumask_kfunc_syscall)
+{
+	cpumask_kfunc_load_test();
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/progs/verifier_sock_addr.c b/tools/testing/selftests/bpf/progs/verifier_sock_addr.c
new file mode 100644
index 000000000000..9c31448a0f52
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/verifier_sock_addr.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Google LLC */
+
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf_sockopt_helpers.h>
+#include "bpf_misc.h"
+
+SEC("cgroup/recvmsg4")
+__success
+int recvmsg4_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/recvmsg4")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int recvmsg4_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/recvmsg6")
+__success
+int recvmsg6_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/recvmsg6")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int recvmsg6_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/recvmsg_unix")
+__success
+int recvmsg_unix_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/recvmsg_unix")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int recvmsg_unix_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/sendmsg4")
+__success
+int sendmsg4_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/sendmsg4")
+__success
+int sendmsg4_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/sendmsg4")
+__failure __msg("At program exit the register R0 has smin=2 smax=2 should have been in [0, 1]")
+int sendmsg4_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/sendmsg6")
+__success
+int sendmsg6_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/sendmsg6")
+__success
+int sendmsg6_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/sendmsg6")
+__failure __msg("At program exit the register R0 has smin=2 smax=2 should have been in [0, 1]")
+int sendmsg6_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/sendmsg_unix")
+__success
+int sendmsg_unix_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/sendmsg_unix")
+__success
+int sendmsg_unix_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/sendmsg_unix")
+__failure __msg("At program exit the register R0 has smin=2 smax=2 should have been in [0, 1]")
+int sendmsg_unix_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/getpeername4")
+__success
+int getpeername4_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/getpeername4")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int getpeername4_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/getpeername6")
+__success
+int getpeername6_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/getpeername6")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int getpeername6_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/getpeername_unix")
+__success
+int getpeername_unix_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/getpeername_unix")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int getpeername_unix_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/getsockname4")
+__success
+int getsockname4_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/getsockname4")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int getsockname4_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/getsockname6")
+__success
+int getsockname6_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/getsockname6")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int getsockname6_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/getsockname_unix")
+__success
+int getsockname_unix_good_return_code(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/getsockname_unix")
+__failure __msg("At program exit the register R0 has smin=0 smax=0 should have been in [1, 1]")
+int getsockname_unix_unix_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/bind4")
+__success
+int bind4_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/bind4")
+__success
+int bind4_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/bind4")
+__success
+int bind4_good_return_code_2(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/bind4")
+__success
+int bind4_good_return_code_3(struct bpf_sock_addr *ctx)
+{
+	return 3;
+}
+
+SEC("cgroup/bind4")
+__failure __msg("At program exit the register R0 has smin=4 smax=4 should have been in [0, 3]")
+int bind4_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 4;
+}
+
+SEC("cgroup/bind6")
+__success
+int bind6_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/bind6")
+__success
+int bind6_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/bind6")
+__success
+int bind6_good_return_code_2(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/bind6")
+__success
+int bind6_good_return_code_3(struct bpf_sock_addr *ctx)
+{
+	return 3;
+}
+
+SEC("cgroup/bind6")
+__failure __msg("At program exit the register R0 has smin=4 smax=4 should have been in [0, 3]")
+int bind6_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 4;
+}
+
+SEC("cgroup/connect4")
+__success
+int connect4_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/connect4")
+__success
+int connect4_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/connect4")
+__failure __msg("At program exit the register R0 has smin=2 smax=2 should have been in [0, 1]")
+int connect4_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/connect6")
+__success
+int connect6_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/connect6")
+__success
+int connect6_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/connect6")
+__failure __msg("At program exit the register R0 has smin=2 smax=2 should have been in [0, 1]")
+int connect6_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+SEC("cgroup/connect_unix")
+__success
+int connect_unix_good_return_code_0(struct bpf_sock_addr *ctx)
+{
+	return 0;
+}
+
+SEC("cgroup/connect_unix")
+__success
+int connect_unix_good_return_code_1(struct bpf_sock_addr *ctx)
+{
+	return 1;
+}
+
+SEC("cgroup/connect_unix")
+__failure __msg("At program exit the register R0 has smin=2 smax=2 should have been in [0, 1]")
+int connect_unix_bad_return_code(struct bpf_sock_addr *ctx)
+{
+	return 2;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c
index 6f5d19665cf6..4a58e0398e72 100644
--- a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c
+++ b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c
@@ -6,6 +6,7 @@
 #include <linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 #include "bpf_misc.h"
+#include <../../../tools/include/linux/filter.h>
 
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof(x[0]))
 
@@ -76,6 +77,94 @@ __naked int subprog_result_precise(void)
 	);
 }
 
+__naked __noinline __used
+static unsigned long fp_leaking_subprog()
+{
+	asm volatile (
+		".8byte %[r0_eq_r10_cast_s8];"
+		"exit;"
+		:: __imm_insn(r0_eq_r10_cast_s8, BPF_MOVSX64_REG(BPF_REG_0, BPF_REG_10, 8))
+	);
+}
+
+__naked __noinline __used
+static unsigned long sneaky_fp_leaking_subprog()
+{
+	asm volatile (
+		"r1 = r10;"
+		".8byte %[r0_eq_r1_cast_s8];"
+		"exit;"
+		:: __imm_insn(r0_eq_r1_cast_s8, BPF_MOVSX64_REG(BPF_REG_0, BPF_REG_1, 8))
+	);
+}
+
+SEC("?raw_tp")
+__success __log_level(2)
+__msg("6: (0f) r1 += r0")
+__msg("mark_precise: frame0: last_idx 6 first_idx 0 subseq_idx -1")
+__msg("mark_precise: frame0: regs=r0 stack= before 5: (bf) r1 = r6")
+__msg("mark_precise: frame0: regs=r0 stack= before 4: (27) r0 *= 4")
+__msg("mark_precise: frame0: regs=r0 stack= before 3: (57) r0 &= 3")
+__msg("mark_precise: frame0: regs=r0 stack= before 10: (95) exit")
+__msg("mark_precise: frame1: regs=r0 stack= before 9: (bf) r0 = (s8)r10")
+__msg("7: R0_w=scalar")
+__naked int fp_precise_subprog_result(void)
+{
+	asm volatile (
+		"call fp_leaking_subprog;"
+		/* use subprog's returned value (which is derived from r10=fp
+		 * register), as index into vals array, forcing all of that to
+		 * be known precisely
+		 */
+		"r0 &= 3;"
+		"r0 *= 4;"
+		"r1 = %[vals];"
+		/* force precision marking */
+		"r1 += r0;"
+		"r0 = *(u32 *)(r1 + 0);"
+		"exit;"
+		:
+		: __imm_ptr(vals)
+		: __clobber_common
+	);
+}
+
+SEC("?raw_tp")
+__success __log_level(2)
+__msg("6: (0f) r1 += r0")
+__msg("mark_precise: frame0: last_idx 6 first_idx 0 subseq_idx -1")
+__msg("mark_precise: frame0: regs=r0 stack= before 5: (bf) r1 = r6")
+__msg("mark_precise: frame0: regs=r0 stack= before 4: (27) r0 *= 4")
+__msg("mark_precise: frame0: regs=r0 stack= before 3: (57) r0 &= 3")
+__msg("mark_precise: frame0: regs=r0 stack= before 11: (95) exit")
+__msg("mark_precise: frame1: regs=r0 stack= before 10: (bf) r0 = (s8)r1")
+/* here r1 is marked precise, even though it's fp register, but that's fine
+ * because by the time we get out of subprogram it has to be derived from r10
+ * anyways, at which point we'll break precision chain
+ */
+__msg("mark_precise: frame1: regs=r1 stack= before 9: (bf) r1 = r10")
+__msg("7: R0_w=scalar")
+__naked int sneaky_fp_precise_subprog_result(void)
+{
+	asm volatile (
+		"call sneaky_fp_leaking_subprog;"
+		/* use subprog's returned value (which is derived from r10=fp
+		 * register), as index into vals array, forcing all of that to
+		 * be known precisely
+		 */
+		"r0 &= 3;"
+		"r0 *= 4;"
+		"r1 = %[vals];"
+		/* force precision marking */
+		"r1 += r0;"
+		"r0 = *(u32 *)(r1 + 0);"
+		"exit;"
+		:
+		: __imm_ptr(vals)
+		: __clobber_common
+	);
+}
+
 SEC("?raw_tp")
 __success __log_level(2)
 __msg("9: (0f) r1 += r0")
diff --git a/tools/testing/selftests/bpf/progs/wq.c b/tools/testing/selftests/bpf/progs/wq.c
new file mode 100644
index 000000000000..49e712acbf60
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/wq.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Benjamin Tissoires
+ */
+
+#include "bpf_experimental.h"
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+#include "../bpf_testmod/bpf_testmod_kfunc.h"
+
+char _license[] SEC("license") = "GPL";
+
+struct hmap_elem {
+	int counter;
+	struct bpf_timer timer; /* unused */
+	struct bpf_spin_lock lock; /* unused */
+	struct bpf_wq work;
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__uint(max_entries, 1000);
+	__type(key, int);
+	__type(value, struct hmap_elem);
+} hmap SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__uint(map_flags, BPF_F_NO_PREALLOC);
+	__uint(max_entries, 1000);
+	__type(key, int);
+	__type(value, struct hmap_elem);
+} hmap_malloc SEC(".maps");
+
+struct elem {
+	struct bpf_wq w;
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(max_entries, 2);
+	__type(key, int);
+	__type(value, struct elem);
+} array SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_LRU_HASH);
+	__uint(max_entries, 4);
+	__type(key, int);
+	__type(value, struct elem);
+} lru SEC(".maps");
+
+__u32 ok;
+__u32 ok_sleepable;
+
+static int test_elem_callback(void *map, int *key,
+		int (callback_fn)(void *map, int *key, struct bpf_wq *wq))
+{
+	struct elem init = {}, *val;
+	struct bpf_wq *wq;
+
+	if ((ok & (1 << *key) ||
+	    (ok_sleepable & (1 << *key))))
+		return -22;
+
+	if (map == &lru &&
+	    bpf_map_update_elem(map, key, &init, 0))
+		return -1;
+
+	val = bpf_map_lookup_elem(map, key);
+	if (!val)
+		return -2;
+
+	wq = &val->w;
+	if (bpf_wq_init(wq, map, 0) != 0)
+		return -3;
+
+	if (bpf_wq_set_callback(wq, callback_fn, 0))
+		return -4;
+
+	if (bpf_wq_start(wq, 0))
+		return -5;
+
+	return 0;
+}
+
+static int test_hmap_elem_callback(void *map, int *key,
+		int (callback_fn)(void *map, int *key, struct bpf_wq *wq))
+{
+	struct hmap_elem init = {}, *val;
+	struct bpf_wq *wq;
+
+	if ((ok & (1 << *key) ||
+	    (ok_sleepable & (1 << *key))))
+		return -22;
+
+	if (bpf_map_update_elem(map, key, &init, 0))
+		return -1;
+
+	val = bpf_map_lookup_elem(map, key);
+	if (!val)
+		return -2;
+
+	wq = &val->work;
+	if (bpf_wq_init(wq, map, 0) != 0)
+		return -3;
+
+	if (bpf_wq_set_callback(wq, callback_fn, 0))
+		return -4;
+
+	if (bpf_wq_start(wq, 0))
+		return -5;
+
+	return 0;
+}
+
+/* callback for non sleepable workqueue */
+static int wq_callback(void *map, int *key, struct bpf_wq *work)
+{
+	bpf_kfunc_common_test();
+	ok |= (1 << *key);
+	return 0;
+}
+
+/* callback for sleepable workqueue */
+static int wq_cb_sleepable(void *map, int *key, struct bpf_wq *work)
+{
+	bpf_kfunc_call_test_sleepable();
+	ok_sleepable |= (1 << *key);
+	return 0;
+}
+
+SEC("tc")
+/* test that workqueues can be used from an array */
+__retval(0)
+long test_call_array_sleepable(void *ctx)
+{
+	int key = 0;
+
+	return test_elem_callback(&array, &key, wq_cb_sleepable);
+}
+
+SEC("syscall")
+/* Same test than above but from a sleepable context. */
+__retval(0)
+long test_syscall_array_sleepable(void *ctx)
+{
+	int key = 1;
+
+	return test_elem_callback(&array, &key, wq_cb_sleepable);
+}
+
+SEC("tc")
+/* test that workqueues can be used from a hashmap */
+__retval(0)
+long test_call_hash_sleepable(void *ctx)
+{
+	int key = 2;
+
+	return test_hmap_elem_callback(&hmap, &key, wq_callback);
+}
+
+SEC("tc")
+/* test that workqueues can be used from a hashmap with NO_PREALLOC. */
+__retval(0)
+long test_call_hash_malloc_sleepable(void *ctx)
+{
+	int key = 3;
+
+	return test_hmap_elem_callback(&hmap_malloc, &key, wq_callback);
+}
+
+SEC("tc")
+/* test that workqueues can be used from a LRU map */
+__retval(0)
+long test_call_lru_sleepable(void *ctx)
+{
+	int key = 4;
+
+	return test_elem_callback(&lru, &key, wq_callback);
+}
diff --git a/tools/testing/selftests/bpf/progs/wq_failures.c b/tools/testing/selftests/bpf/progs/wq_failures.c
new file mode 100644
index 000000000000..4cbdb425f223
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/wq_failures.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Benjamin Tissoires
+ */
+
+#include "bpf_experimental.h"
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+#include "../bpf_testmod/bpf_testmod_kfunc.h"
+
+char _license[] SEC("license") = "GPL";
+
+struct elem {
+	struct bpf_wq w;
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(max_entries, 2);
+	__type(key, int);
+	__type(value, struct elem);
+} array SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_LRU_HASH);
+	__uint(max_entries, 4);
+	__type(key, int);
+	__type(value, struct elem);
+} lru SEC(".maps");
+
+/* callback for non sleepable workqueue */
+static int wq_callback(void *map, int *key, struct bpf_wq *work)
+{
+	bpf_kfunc_common_test();
+	return 0;
+}
+
+/* callback for sleepable workqueue */
+static int wq_cb_sleepable(void *map, int *key, struct bpf_wq *work)
+{
+	bpf_kfunc_call_test_sleepable();
+	return 0;
+}
+
+SEC("tc")
+/* test that bpf_wq_init takes a map as a second argument
+ */
+__log_level(2)
+__flag(BPF_F_TEST_STATE_FREQ)
+__failure
+__msg(": (85) call bpf_wq_init#") /* anchor message */
+__msg("pointer in R2 isn't map pointer")
+long test_wq_init_nomap(void *ctx)
+{
+	struct bpf_wq *wq;
+	struct elem *val;
+	int key = 0;
+
+	val = bpf_map_lookup_elem(&array, &key);
+	if (!val)
+		return -1;
+
+	wq = &val->w;
+	if (bpf_wq_init(wq, &key, 0) != 0)
+		return -3;
+
+	return 0;
+}
+
+SEC("tc")
+/* test that the workqueue is part of the map in bpf_wq_init
+ */
+__log_level(2)
+__flag(BPF_F_TEST_STATE_FREQ)
+__failure
+__msg(": (85) call bpf_wq_init#") /* anchor message */
+__msg("workqueue pointer in R1 map_uid=0 doesn't match map pointer in R2 map_uid=0")
+long test_wq_init_wrong_map(void *ctx)
+{
+	struct bpf_wq *wq;
+	struct elem *val;
+	int key = 0;
+
+	val = bpf_map_lookup_elem(&array, &key);
+	if (!val)
+		return -1;
+
+	wq = &val->w;
+	if (bpf_wq_init(wq, &lru, 0) != 0)
+		return -3;
+
+	return 0;
+}
+
+SEC("?tc")
+__log_level(2)
+__failure
+/* check that the first argument of bpf_wq_set_callback()
+ * is a correct bpf_wq pointer.
+ */
+__msg(": (85) call bpf_wq_set_callback_impl#") /* anchor message */
+__msg("arg#0 doesn't point to a map value")
+long test_wrong_wq_pointer(void *ctx)
+{
+	int key = 0;
+	struct bpf_wq *wq;
+
+	wq = bpf_map_lookup_elem(&array, &key);
+	if (!wq)
+		return 1;
+
+	if (bpf_wq_init(wq, &array, 0))
+		return 2;
+
+	if (bpf_wq_set_callback((void *)&wq, wq_callback, 0))
+		return 3;
+
+	return -22;
+}
+
+SEC("?tc")
+__log_level(2)
+__failure
+/* check that the first argument of bpf_wq_set_callback()
+ * is a correct bpf_wq pointer.
+ */
+__msg(": (85) call bpf_wq_set_callback_impl#") /* anchor message */
+__msg("off 1 doesn't point to 'struct bpf_wq' that is at 0")
+long test_wrong_wq_pointer_offset(void *ctx)
+{
+	int key = 0;
+	struct bpf_wq *wq;
+
+	wq = bpf_map_lookup_elem(&array, &key);
+	if (!wq)
+		return 1;
+
+	if (bpf_wq_init(wq, &array, 0))
+		return 2;
+
+	if (bpf_wq_set_callback((void *)wq + 1, wq_cb_sleepable, 0))
+		return 3;
+
+	return -22;
+}
diff --git a/tools/testing/selftests/bpf/test_cpp.cpp b/tools/testing/selftests/bpf/test_cpp.cpp
index f4936834f76f..dde0bb16e782 100644
--- a/tools/testing/selftests/bpf/test_cpp.cpp
+++ b/tools/testing/selftests/bpf/test_cpp.cpp
@@ -7,6 +7,7 @@
 #include <bpf/bpf.h>
 #include <bpf/btf.h>
 #include "test_core_extern.skel.h"
+#include "struct_ops_module.skel.h"
 
 template <typename T>
 class Skeleton {
@@ -98,6 +99,7 @@ int main(int argc, char *argv[])
 {
 	struct btf_dump_opts opts = { };
 	struct test_core_extern *skel;
+	struct struct_ops_module *skel2;
 	struct btf *btf;
 	int fd;
 
@@ -118,6 +120,9 @@ int main(int argc, char *argv[])
 	skel = test_core_extern__open_and_load();
 	test_core_extern__destroy(skel);
 
+	skel2 = struct_ops_module__open_and_load();
+	struct_ops_module__destroy(skel2);
+
 	fd = bpf_enable_stats(BPF_STATS_RUN_TIME);
 	if (fd < 0)
 		std::cout << "FAILED to enable stats: " << fd << std::endl;
diff --git a/tools/testing/selftests/bpf/test_sock_addr.c b/tools/testing/selftests/bpf/test_sock_addr.c
deleted file mode 100644
index 80c42583f597..000000000000
--- a/tools/testing/selftests/bpf/test_sock_addr.c
+++ /dev/null
@@ -1,1434 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Facebook
-
-#define _GNU_SOURCE
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include <arpa/inet.h>
-#include <netinet/in.h>
-#include <sys/types.h>
-#include <sys/select.h>
-#include <sys/socket.h>
-
-#include <linux/filter.h>
-
-#include <bpf/bpf.h>
-#include <bpf/libbpf.h>
-
-#include "cgroup_helpers.h"
-#include "testing_helpers.h"
-#include "bpf_util.h"
-
-#ifndef ENOTSUPP
-# define ENOTSUPP 524
-#endif
-
-#define CG_PATH	"/foo"
-#define CONNECT4_PROG_PATH	"./connect4_prog.bpf.o"
-#define CONNECT6_PROG_PATH	"./connect6_prog.bpf.o"
-#define SENDMSG4_PROG_PATH	"./sendmsg4_prog.bpf.o"
-#define SENDMSG6_PROG_PATH	"./sendmsg6_prog.bpf.o"
-#define RECVMSG4_PROG_PATH	"./recvmsg4_prog.bpf.o"
-#define RECVMSG6_PROG_PATH	"./recvmsg6_prog.bpf.o"
-#define BIND4_PROG_PATH		"./bind4_prog.bpf.o"
-#define BIND6_PROG_PATH		"./bind6_prog.bpf.o"
-
-#define SERV4_IP		"192.168.1.254"
-#define SERV4_REWRITE_IP	"127.0.0.1"
-#define SRC4_IP			"172.16.0.1"
-#define SRC4_REWRITE_IP		"127.0.0.4"
-#define SERV4_PORT		4040
-#define SERV4_REWRITE_PORT	4444
-
-#define SERV6_IP		"face:b00c:1234:5678::abcd"
-#define SERV6_REWRITE_IP	"::1"
-#define SERV6_V4MAPPED_IP	"::ffff:192.168.0.4"
-#define SRC6_IP			"::1"
-#define SRC6_REWRITE_IP		"::6"
-#define WILDCARD6_IP		"::"
-#define SERV6_PORT		6060
-#define SERV6_REWRITE_PORT	6666
-
-#define INET_NTOP_BUF	40
-
-struct sock_addr_test;
-
-typedef int (*load_fn)(const struct sock_addr_test *test);
-typedef int (*info_fn)(int, struct sockaddr *, socklen_t *);
-
-char bpf_log_buf[BPF_LOG_BUF_SIZE];
-
-struct sock_addr_test {
-	const char *descr;
-	/* BPF prog properties */
-	load_fn loadfn;
-	enum bpf_attach_type expected_attach_type;
-	enum bpf_attach_type attach_type;
-	/* Socket properties */
-	int domain;
-	int type;
-	/* IP:port pairs for BPF prog to override */
-	const char *requested_ip;
-	unsigned short requested_port;
-	const char *expected_ip;
-	unsigned short expected_port;
-	const char *expected_src_ip;
-	/* Expected test result */
-	enum {
-		LOAD_REJECT,
-		ATTACH_REJECT,
-		ATTACH_OKAY,
-		SYSCALL_EPERM,
-		SYSCALL_ENOTSUPP,
-		SUCCESS,
-	} expected_result;
-};
-
-static int bind4_prog_load(const struct sock_addr_test *test);
-static int bind6_prog_load(const struct sock_addr_test *test);
-static int connect4_prog_load(const struct sock_addr_test *test);
-static int connect6_prog_load(const struct sock_addr_test *test);
-static int sendmsg_allow_prog_load(const struct sock_addr_test *test);
-static int sendmsg_deny_prog_load(const struct sock_addr_test *test);
-static int recvmsg_allow_prog_load(const struct sock_addr_test *test);
-static int recvmsg_deny_prog_load(const struct sock_addr_test *test);
-static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test);
-static int recvmsg4_rw_c_prog_load(const struct sock_addr_test *test);
-static int sendmsg4_rw_c_prog_load(const struct sock_addr_test *test);
-static int sendmsg6_rw_asm_prog_load(const struct sock_addr_test *test);
-static int recvmsg6_rw_c_prog_load(const struct sock_addr_test *test);
-static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test);
-static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test);
-static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test);
-
-static struct sock_addr_test tests[] = {
-	/* bind */
-	{
-		"bind4: load prog with wrong expected attach type",
-		bind4_prog_load,
-		BPF_CGROUP_INET6_BIND,
-		BPF_CGROUP_INET4_BIND,
-		AF_INET,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"bind4: attach prog with wrong attach type",
-		bind4_prog_load,
-		BPF_CGROUP_INET4_BIND,
-		BPF_CGROUP_INET6_BIND,
-		AF_INET,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_REJECT,
-	},
-	{
-		"bind4: rewrite IP & TCP port in",
-		bind4_prog_load,
-		BPF_CGROUP_INET4_BIND,
-		BPF_CGROUP_INET4_BIND,
-		AF_INET,
-		SOCK_STREAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		NULL,
-		SUCCESS,
-	},
-	{
-		"bind4: rewrite IP & UDP port in",
-		bind4_prog_load,
-		BPF_CGROUP_INET4_BIND,
-		BPF_CGROUP_INET4_BIND,
-		AF_INET,
-		SOCK_DGRAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		NULL,
-		SUCCESS,
-	},
-	{
-		"bind6: load prog with wrong expected attach type",
-		bind6_prog_load,
-		BPF_CGROUP_INET4_BIND,
-		BPF_CGROUP_INET6_BIND,
-		AF_INET6,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"bind6: attach prog with wrong attach type",
-		bind6_prog_load,
-		BPF_CGROUP_INET6_BIND,
-		BPF_CGROUP_INET4_BIND,
-		AF_INET,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_REJECT,
-	},
-	{
-		"bind6: rewrite IP & TCP port in",
-		bind6_prog_load,
-		BPF_CGROUP_INET6_BIND,
-		BPF_CGROUP_INET6_BIND,
-		AF_INET6,
-		SOCK_STREAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		NULL,
-		SUCCESS,
-	},
-	{
-		"bind6: rewrite IP & UDP port in",
-		bind6_prog_load,
-		BPF_CGROUP_INET6_BIND,
-		BPF_CGROUP_INET6_BIND,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		NULL,
-		SUCCESS,
-	},
-
-	/* connect */
-	{
-		"connect4: load prog with wrong expected attach type",
-		connect4_prog_load,
-		BPF_CGROUP_INET6_CONNECT,
-		BPF_CGROUP_INET4_CONNECT,
-		AF_INET,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"connect4: attach prog with wrong attach type",
-		connect4_prog_load,
-		BPF_CGROUP_INET4_CONNECT,
-		BPF_CGROUP_INET6_CONNECT,
-		AF_INET,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_REJECT,
-	},
-	{
-		"connect4: rewrite IP & TCP port",
-		connect4_prog_load,
-		BPF_CGROUP_INET4_CONNECT,
-		BPF_CGROUP_INET4_CONNECT,
-		AF_INET,
-		SOCK_STREAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SRC4_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"connect4: rewrite IP & UDP port",
-		connect4_prog_load,
-		BPF_CGROUP_INET4_CONNECT,
-		BPF_CGROUP_INET4_CONNECT,
-		AF_INET,
-		SOCK_DGRAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SRC4_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"connect6: load prog with wrong expected attach type",
-		connect6_prog_load,
-		BPF_CGROUP_INET4_CONNECT,
-		BPF_CGROUP_INET6_CONNECT,
-		AF_INET6,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"connect6: attach prog with wrong attach type",
-		connect6_prog_load,
-		BPF_CGROUP_INET6_CONNECT,
-		BPF_CGROUP_INET4_CONNECT,
-		AF_INET,
-		SOCK_STREAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_REJECT,
-	},
-	{
-		"connect6: rewrite IP & TCP port",
-		connect6_prog_load,
-		BPF_CGROUP_INET6_CONNECT,
-		BPF_CGROUP_INET6_CONNECT,
-		AF_INET6,
-		SOCK_STREAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"connect6: rewrite IP & UDP port",
-		connect6_prog_load,
-		BPF_CGROUP_INET6_CONNECT,
-		BPF_CGROUP_INET6_CONNECT,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SUCCESS,
-	},
-
-	/* sendmsg */
-	{
-		"sendmsg4: load prog with wrong expected attach type",
-		sendmsg4_rw_asm_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP4_SENDMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"sendmsg4: attach prog with wrong attach type",
-		sendmsg4_rw_asm_prog_load,
-		BPF_CGROUP_UDP4_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_REJECT,
-	},
-	{
-		"sendmsg4: rewrite IP & port (asm)",
-		sendmsg4_rw_asm_prog_load,
-		BPF_CGROUP_UDP4_SENDMSG,
-		BPF_CGROUP_UDP4_SENDMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SRC4_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"sendmsg4: rewrite IP & port (C)",
-		sendmsg4_rw_c_prog_load,
-		BPF_CGROUP_UDP4_SENDMSG,
-		BPF_CGROUP_UDP4_SENDMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SRC4_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"sendmsg4: deny call",
-		sendmsg_deny_prog_load,
-		BPF_CGROUP_UDP4_SENDMSG,
-		BPF_CGROUP_UDP4_SENDMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		SERV4_IP,
-		SERV4_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SRC4_REWRITE_IP,
-		SYSCALL_EPERM,
-	},
-	{
-		"sendmsg6: load prog with wrong expected attach type",
-		sendmsg6_rw_asm_prog_load,
-		BPF_CGROUP_UDP4_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"sendmsg6: attach prog with wrong attach type",
-		sendmsg6_rw_asm_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP4_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_REJECT,
-	},
-	{
-		"sendmsg6: rewrite IP & port (asm)",
-		sendmsg6_rw_asm_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"sendmsg6: rewrite IP & port (C)",
-		sendmsg6_rw_c_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"sendmsg6: IPv4-mapped IPv6",
-		sendmsg6_rw_v4mapped_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SYSCALL_ENOTSUPP,
-	},
-	{
-		"sendmsg6: set dst IP = [::] (BSD'ism)",
-		sendmsg6_rw_wildcard_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SUCCESS,
-	},
-	{
-		"sendmsg6: preserve dst IP = [::] (BSD'ism)",
-		sendmsg_allow_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		WILDCARD6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_PORT,
-		SRC6_IP,
-		SUCCESS,
-	},
-	{
-		"sendmsg6: deny call",
-		sendmsg_deny_prog_load,
-		BPF_CGROUP_UDP6_SENDMSG,
-		BPF_CGROUP_UDP6_SENDMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_IP,
-		SERV6_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SRC6_REWRITE_IP,
-		SYSCALL_EPERM,
-	},
-
-	/* recvmsg */
-	{
-		"recvmsg4: return code ok",
-		recvmsg_allow_prog_load,
-		BPF_CGROUP_UDP4_RECVMSG,
-		BPF_CGROUP_UDP4_RECVMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_OKAY,
-	},
-	{
-		"recvmsg4: return code !ok",
-		recvmsg_deny_prog_load,
-		BPF_CGROUP_UDP4_RECVMSG,
-		BPF_CGROUP_UDP4_RECVMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"recvmsg6: return code ok",
-		recvmsg_allow_prog_load,
-		BPF_CGROUP_UDP6_RECVMSG,
-		BPF_CGROUP_UDP6_RECVMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		ATTACH_OKAY,
-	},
-	{
-		"recvmsg6: return code !ok",
-		recvmsg_deny_prog_load,
-		BPF_CGROUP_UDP6_RECVMSG,
-		BPF_CGROUP_UDP6_RECVMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		NULL,
-		0,
-		NULL,
-		0,
-		NULL,
-		LOAD_REJECT,
-	},
-	{
-		"recvmsg4: rewrite IP & port (C)",
-		recvmsg4_rw_c_prog_load,
-		BPF_CGROUP_UDP4_RECVMSG,
-		BPF_CGROUP_UDP4_RECVMSG,
-		AF_INET,
-		SOCK_DGRAM,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SERV4_REWRITE_IP,
-		SERV4_REWRITE_PORT,
-		SERV4_IP,
-		SUCCESS,
-	},
-	{
-		"recvmsg6: rewrite IP & port (C)",
-		recvmsg6_rw_c_prog_load,
-		BPF_CGROUP_UDP6_RECVMSG,
-		BPF_CGROUP_UDP6_RECVMSG,
-		AF_INET6,
-		SOCK_DGRAM,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SERV6_REWRITE_IP,
-		SERV6_REWRITE_PORT,
-		SERV6_IP,
-		SUCCESS,
-	},
-};
-
-static int mk_sockaddr(int domain, const char *ip, unsigned short port,
-		       struct sockaddr *addr, socklen_t addr_len)
-{
-	struct sockaddr_in6 *addr6;
-	struct sockaddr_in *addr4;
-
-	if (domain != AF_INET && domain != AF_INET6) {
-		log_err("Unsupported address family");
-		return -1;
-	}
-
-	memset(addr, 0, addr_len);
-
-	if (domain == AF_INET) {
-		if (addr_len < sizeof(struct sockaddr_in))
-			return -1;
-		addr4 = (struct sockaddr_in *)addr;
-		addr4->sin_family = domain;
-		addr4->sin_port = htons(port);
-		if (inet_pton(domain, ip, (void *)&addr4->sin_addr) != 1) {
-			log_err("Invalid IPv4: %s", ip);
-			return -1;
-		}
-	} else if (domain == AF_INET6) {
-		if (addr_len < sizeof(struct sockaddr_in6))
-			return -1;
-		addr6 = (struct sockaddr_in6 *)addr;
-		addr6->sin6_family = domain;
-		addr6->sin6_port = htons(port);
-		if (inet_pton(domain, ip, (void *)&addr6->sin6_addr) != 1) {
-			log_err("Invalid IPv6: %s", ip);
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-static int load_insns(const struct sock_addr_test *test,
-		      const struct bpf_insn *insns, size_t insns_cnt)
-{
-	LIBBPF_OPTS(bpf_prog_load_opts, opts);
-	int ret;
-
-	opts.expected_attach_type = test->expected_attach_type;
-	opts.log_buf = bpf_log_buf;
-	opts.log_size = BPF_LOG_BUF_SIZE;
-
-	ret = bpf_prog_load(BPF_PROG_TYPE_CGROUP_SOCK_ADDR, NULL, "GPL", insns, insns_cnt, &opts);
-	if (ret < 0 && test->expected_result != LOAD_REJECT) {
-		log_err(">>> Loading program error.\n"
-			">>> Verifier output:\n%s\n-------\n", bpf_log_buf);
-	}
-
-	return ret;
-}
-
-static int load_path(const struct sock_addr_test *test, const char *path)
-{
-	struct bpf_object *obj;
-	struct bpf_program *prog;
-	int err;
-
-	obj = bpf_object__open_file(path, NULL);
-	err = libbpf_get_error(obj);
-	if (err) {
-		log_err(">>> Opening BPF object (%s) error.\n", path);
-		return -1;
-	}
-
-	prog = bpf_object__next_program(obj, NULL);
-	if (!prog)
-		goto err_out;
-
-	bpf_program__set_type(prog, BPF_PROG_TYPE_CGROUP_SOCK_ADDR);
-	bpf_program__set_expected_attach_type(prog, test->expected_attach_type);
-	bpf_program__set_flags(prog, testing_prog_flags());
-
-	err = bpf_object__load(obj);
-	if (err) {
-		if (test->expected_result != LOAD_REJECT)
-			log_err(">>> Loading program (%s) error.\n", path);
-		goto err_out;
-	}
-
-	return bpf_program__fd(prog);
-err_out:
-	bpf_object__close(obj);
-	return -1;
-}
-
-static int bind4_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, BIND4_PROG_PATH);
-}
-
-static int bind6_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, BIND6_PROG_PATH);
-}
-
-static int connect4_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, CONNECT4_PROG_PATH);
-}
-
-static int connect6_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, CONNECT6_PROG_PATH);
-}
-
-static int xmsg_ret_only_prog_load(const struct sock_addr_test *test,
-				   int32_t rc)
-{
-	struct bpf_insn insns[] = {
-		/* return rc */
-		BPF_MOV64_IMM(BPF_REG_0, rc),
-		BPF_EXIT_INSN(),
-	};
-	return load_insns(test, insns, ARRAY_SIZE(insns));
-}
-
-static int sendmsg_allow_prog_load(const struct sock_addr_test *test)
-{
-	return xmsg_ret_only_prog_load(test, /*rc*/ 1);
-}
-
-static int sendmsg_deny_prog_load(const struct sock_addr_test *test)
-{
-	return xmsg_ret_only_prog_load(test, /*rc*/ 0);
-}
-
-static int recvmsg_allow_prog_load(const struct sock_addr_test *test)
-{
-	return xmsg_ret_only_prog_load(test, /*rc*/ 1);
-}
-
-static int recvmsg_deny_prog_load(const struct sock_addr_test *test)
-{
-	return xmsg_ret_only_prog_load(test, /*rc*/ 0);
-}
-
-static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test)
-{
-	struct sockaddr_in dst4_rw_addr;
-	struct in_addr src4_rw_ip;
-
-	if (inet_pton(AF_INET, SRC4_REWRITE_IP, (void *)&src4_rw_ip) != 1) {
-		log_err("Invalid IPv4: %s", SRC4_REWRITE_IP);
-		return -1;
-	}
-
-	if (mk_sockaddr(AF_INET, SERV4_REWRITE_IP, SERV4_REWRITE_PORT,
-			(struct sockaddr *)&dst4_rw_addr,
-			sizeof(dst4_rw_addr)) == -1)
-		return -1;
-
-	struct bpf_insn insns[] = {
-		BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
-
-		/* if (sk.family == AF_INET && */
-		BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
-			    offsetof(struct bpf_sock_addr, family)),
-		BPF_JMP_IMM(BPF_JNE, BPF_REG_7, AF_INET, 8),
-
-		/*     sk.type == SOCK_DGRAM)  { */
-		BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
-			    offsetof(struct bpf_sock_addr, type)),
-		BPF_JMP_IMM(BPF_JNE, BPF_REG_7, SOCK_DGRAM, 6),
-
-		/*      msg_src_ip4 = src4_rw_ip */
-		BPF_MOV32_IMM(BPF_REG_7, src4_rw_ip.s_addr),
-		BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_7,
-			    offsetof(struct bpf_sock_addr, msg_src_ip4)),
-
-		/*      user_ip4 = dst4_rw_addr.sin_addr */
-		BPF_MOV32_IMM(BPF_REG_7, dst4_rw_addr.sin_addr.s_addr),
-		BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_7,
-			    offsetof(struct bpf_sock_addr, user_ip4)),
-
-		/*      user_port = dst4_rw_addr.sin_port */
-		BPF_MOV32_IMM(BPF_REG_7, dst4_rw_addr.sin_port),
-		BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_7,
-			    offsetof(struct bpf_sock_addr, user_port)),
-		/* } */
-
-		/* return 1 */
-		BPF_MOV64_IMM(BPF_REG_0, 1),
-		BPF_EXIT_INSN(),
-	};
-
-	return load_insns(test, insns, ARRAY_SIZE(insns));
-}
-
-static int recvmsg4_rw_c_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, RECVMSG4_PROG_PATH);
-}
-
-static int sendmsg4_rw_c_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, SENDMSG4_PROG_PATH);
-}
-
-static int sendmsg6_rw_dst_asm_prog_load(const struct sock_addr_test *test,
-					 const char *rw_dst_ip)
-{
-	struct sockaddr_in6 dst6_rw_addr;
-	struct in6_addr src6_rw_ip;
-
-	if (inet_pton(AF_INET6, SRC6_REWRITE_IP, (void *)&src6_rw_ip) != 1) {
-		log_err("Invalid IPv6: %s", SRC6_REWRITE_IP);
-		return -1;
-	}
-
-	if (mk_sockaddr(AF_INET6, rw_dst_ip, SERV6_REWRITE_PORT,
-			(struct sockaddr *)&dst6_rw_addr,
-			sizeof(dst6_rw_addr)) == -1)
-		return -1;
-
-	struct bpf_insn insns[] = {
-		BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
-
-		/* if (sk.family == AF_INET6) { */
-		BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
-			    offsetof(struct bpf_sock_addr, family)),
-		BPF_JMP_IMM(BPF_JNE, BPF_REG_7, AF_INET6, 18),
-
-#define STORE_IPV6_WORD_N(DST, SRC, N)					       \
-		BPF_MOV32_IMM(BPF_REG_7, SRC[N]),			       \
-		BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_7,		       \
-			    offsetof(struct bpf_sock_addr, DST[N]))
-
-#define STORE_IPV6(DST, SRC)						       \
-		STORE_IPV6_WORD_N(DST, SRC, 0),				       \
-		STORE_IPV6_WORD_N(DST, SRC, 1),				       \
-		STORE_IPV6_WORD_N(DST, SRC, 2),				       \
-		STORE_IPV6_WORD_N(DST, SRC, 3)
-
-		STORE_IPV6(msg_src_ip6, src6_rw_ip.s6_addr32),
-		STORE_IPV6(user_ip6, dst6_rw_addr.sin6_addr.s6_addr32),
-
-		/*      user_port = dst6_rw_addr.sin6_port */
-		BPF_MOV32_IMM(BPF_REG_7, dst6_rw_addr.sin6_port),
-		BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_7,
-			    offsetof(struct bpf_sock_addr, user_port)),
-
-		/* } */
-
-		/* return 1 */
-		BPF_MOV64_IMM(BPF_REG_0, 1),
-		BPF_EXIT_INSN(),
-	};
-
-	return load_insns(test, insns, ARRAY_SIZE(insns));
-}
-
-static int sendmsg6_rw_asm_prog_load(const struct sock_addr_test *test)
-{
-	return sendmsg6_rw_dst_asm_prog_load(test, SERV6_REWRITE_IP);
-}
-
-static int recvmsg6_rw_c_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, RECVMSG6_PROG_PATH);
-}
-
-static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test)
-{
-	return sendmsg6_rw_dst_asm_prog_load(test, SERV6_V4MAPPED_IP);
-}
-
-static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test)
-{
-	return sendmsg6_rw_dst_asm_prog_load(test, WILDCARD6_IP);
-}
-
-static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test)
-{
-	return load_path(test, SENDMSG6_PROG_PATH);
-}
-
-static int cmp_addr(const struct sockaddr_storage *addr1,
-		    const struct sockaddr_storage *addr2, int cmp_port)
-{
-	const struct sockaddr_in *four1, *four2;
-	const struct sockaddr_in6 *six1, *six2;
-
-	if (addr1->ss_family != addr2->ss_family)
-		return -1;
-
-	if (addr1->ss_family == AF_INET) {
-		four1 = (const struct sockaddr_in *)addr1;
-		four2 = (const struct sockaddr_in *)addr2;
-		return !((four1->sin_port == four2->sin_port || !cmp_port) &&
-			 four1->sin_addr.s_addr == four2->sin_addr.s_addr);
-	} else if (addr1->ss_family == AF_INET6) {
-		six1 = (const struct sockaddr_in6 *)addr1;
-		six2 = (const struct sockaddr_in6 *)addr2;
-		return !((six1->sin6_port == six2->sin6_port || !cmp_port) &&
-			 !memcmp(&six1->sin6_addr, &six2->sin6_addr,
-				 sizeof(struct in6_addr)));
-	}
-
-	return -1;
-}
-
-static int cmp_sock_addr(info_fn fn, int sock1,
-			 const struct sockaddr_storage *addr2, int cmp_port)
-{
-	struct sockaddr_storage addr1;
-	socklen_t len1 = sizeof(addr1);
-
-	memset(&addr1, 0, len1);
-	if (fn(sock1, (struct sockaddr *)&addr1, (socklen_t *)&len1) != 0)
-		return -1;
-
-	return cmp_addr(&addr1, addr2, cmp_port);
-}
-
-static int cmp_local_ip(int sock1, const struct sockaddr_storage *addr2)
-{
-	return cmp_sock_addr(getsockname, sock1, addr2, /*cmp_port*/ 0);
-}
-
-static int cmp_local_addr(int sock1, const struct sockaddr_storage *addr2)
-{
-	return cmp_sock_addr(getsockname, sock1, addr2, /*cmp_port*/ 1);
-}
-
-static int cmp_peer_addr(int sock1, const struct sockaddr_storage *addr2)
-{
-	return cmp_sock_addr(getpeername, sock1, addr2, /*cmp_port*/ 1);
-}
-
-static int start_server(int type, const struct sockaddr_storage *addr,
-			socklen_t addr_len)
-{
-	int fd;
-
-	fd = socket(addr->ss_family, type, 0);
-	if (fd == -1) {
-		log_err("Failed to create server socket");
-		goto out;
-	}
-
-	if (bind(fd, (const struct sockaddr *)addr, addr_len) == -1) {
-		log_err("Failed to bind server socket");
-		goto close_out;
-	}
-
-	if (type == SOCK_STREAM) {
-		if (listen(fd, 128) == -1) {
-			log_err("Failed to listen on server socket");
-			goto close_out;
-		}
-	}
-
-	goto out;
-close_out:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
-
-static int connect_to_server(int type, const struct sockaddr_storage *addr,
-			     socklen_t addr_len)
-{
-	int domain;
-	int fd = -1;
-
-	domain = addr->ss_family;
-
-	if (domain != AF_INET && domain != AF_INET6) {
-		log_err("Unsupported address family");
-		goto err;
-	}
-
-	fd = socket(domain, type, 0);
-	if (fd == -1) {
-		log_err("Failed to create client socket");
-		goto err;
-	}
-
-	if (connect(fd, (const struct sockaddr *)addr, addr_len) == -1) {
-		log_err("Fail to connect to server");
-		goto err;
-	}
-
-	goto out;
-err:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
-
-int init_pktinfo(int domain, struct cmsghdr *cmsg)
-{
-	struct in6_pktinfo *pktinfo6;
-	struct in_pktinfo *pktinfo4;
-
-	if (domain == AF_INET) {
-		cmsg->cmsg_level = SOL_IP;
-		cmsg->cmsg_type = IP_PKTINFO;
-		cmsg->cmsg_len = CMSG_LEN(sizeof(struct in_pktinfo));
-		pktinfo4 = (struct in_pktinfo *)CMSG_DATA(cmsg);
-		memset(pktinfo4, 0, sizeof(struct in_pktinfo));
-		if (inet_pton(domain, SRC4_IP,
-			      (void *)&pktinfo4->ipi_spec_dst) != 1)
-			return -1;
-	} else if (domain == AF_INET6) {
-		cmsg->cmsg_level = SOL_IPV6;
-		cmsg->cmsg_type = IPV6_PKTINFO;
-		cmsg->cmsg_len = CMSG_LEN(sizeof(struct in6_pktinfo));
-		pktinfo6 = (struct in6_pktinfo *)CMSG_DATA(cmsg);
-		memset(pktinfo6, 0, sizeof(struct in6_pktinfo));
-		if (inet_pton(domain, SRC6_IP,
-			      (void *)&pktinfo6->ipi6_addr) != 1)
-			return -1;
-	} else {
-		return -1;
-	}
-
-	return 0;
-}
-
-static int sendmsg_to_server(int type, const struct sockaddr_storage *addr,
-			     socklen_t addr_len, int set_cmsg, int flags,
-			     int *syscall_err)
-{
-	union {
-		char buf[CMSG_SPACE(sizeof(struct in6_pktinfo))];
-		struct cmsghdr align;
-	} control6;
-	union {
-		char buf[CMSG_SPACE(sizeof(struct in_pktinfo))];
-		struct cmsghdr align;
-	} control4;
-	struct msghdr hdr;
-	struct iovec iov;
-	char data = 'a';
-	int domain;
-	int fd = -1;
-
-	domain = addr->ss_family;
-
-	if (domain != AF_INET && domain != AF_INET6) {
-		log_err("Unsupported address family");
-		goto err;
-	}
-
-	fd = socket(domain, type, 0);
-	if (fd == -1) {
-		log_err("Failed to create client socket");
-		goto err;
-	}
-
-	memset(&iov, 0, sizeof(iov));
-	iov.iov_base = &data;
-	iov.iov_len = sizeof(data);
-
-	memset(&hdr, 0, sizeof(hdr));
-	hdr.msg_name = (void *)addr;
-	hdr.msg_namelen = addr_len;
-	hdr.msg_iov = &iov;
-	hdr.msg_iovlen = 1;
-
-	if (set_cmsg) {
-		if (domain == AF_INET) {
-			hdr.msg_control = &control4;
-			hdr.msg_controllen = sizeof(control4.buf);
-		} else if (domain == AF_INET6) {
-			hdr.msg_control = &control6;
-			hdr.msg_controllen = sizeof(control6.buf);
-		}
-		if (init_pktinfo(domain, CMSG_FIRSTHDR(&hdr))) {
-			log_err("Fail to init pktinfo");
-			goto err;
-		}
-	}
-
-	if (sendmsg(fd, &hdr, flags) != sizeof(data)) {
-		log_err("Fail to send message to server");
-		*syscall_err = errno;
-		goto err;
-	}
-
-	goto out;
-err:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
-
-static int fastconnect_to_server(const struct sockaddr_storage *addr,
-				 socklen_t addr_len)
-{
-	int sendmsg_err;
-
-	return sendmsg_to_server(SOCK_STREAM, addr, addr_len, /*set_cmsg*/0,
-				 MSG_FASTOPEN, &sendmsg_err);
-}
-
-static int recvmsg_from_client(int sockfd, struct sockaddr_storage *src_addr)
-{
-	struct timeval tv;
-	struct msghdr hdr;
-	struct iovec iov;
-	char data[64];
-	fd_set rfds;
-
-	FD_ZERO(&rfds);
-	FD_SET(sockfd, &rfds);
-
-	tv.tv_sec = 2;
-	tv.tv_usec = 0;
-
-	if (select(sockfd + 1, &rfds, NULL, NULL, &tv) <= 0 ||
-	    !FD_ISSET(sockfd, &rfds))
-		return -1;
-
-	memset(&iov, 0, sizeof(iov));
-	iov.iov_base = data;
-	iov.iov_len = sizeof(data);
-
-	memset(&hdr, 0, sizeof(hdr));
-	hdr.msg_name = src_addr;
-	hdr.msg_namelen = sizeof(struct sockaddr_storage);
-	hdr.msg_iov = &iov;
-	hdr.msg_iovlen = 1;
-
-	return recvmsg(sockfd, &hdr, 0);
-}
-
-static int init_addrs(const struct sock_addr_test *test,
-		      struct sockaddr_storage *requested_addr,
-		      struct sockaddr_storage *expected_addr,
-		      struct sockaddr_storage *expected_src_addr)
-{
-	socklen_t addr_len = sizeof(struct sockaddr_storage);
-
-	if (mk_sockaddr(test->domain, test->expected_ip, test->expected_port,
-			(struct sockaddr *)expected_addr, addr_len) == -1)
-		goto err;
-
-	if (mk_sockaddr(test->domain, test->requested_ip, test->requested_port,
-			(struct sockaddr *)requested_addr, addr_len) == -1)
-		goto err;
-
-	if (test->expected_src_ip &&
-	    mk_sockaddr(test->domain, test->expected_src_ip, 0,
-			(struct sockaddr *)expected_src_addr, addr_len) == -1)
-		goto err;
-
-	return 0;
-err:
-	return -1;
-}
-
-static int run_bind_test_case(const struct sock_addr_test *test)
-{
-	socklen_t addr_len = sizeof(struct sockaddr_storage);
-	struct sockaddr_storage requested_addr;
-	struct sockaddr_storage expected_addr;
-	int clientfd = -1;
-	int servfd = -1;
-	int err = 0;
-
-	if (init_addrs(test, &requested_addr, &expected_addr, NULL))
-		goto err;
-
-	servfd = start_server(test->type, &requested_addr, addr_len);
-	if (servfd == -1)
-		goto err;
-
-	if (cmp_local_addr(servfd, &expected_addr))
-		goto err;
-
-	/* Try to connect to server just in case */
-	clientfd = connect_to_server(test->type, &expected_addr, addr_len);
-	if (clientfd == -1)
-		goto err;
-
-	goto out;
-err:
-	err = -1;
-out:
-	close(clientfd);
-	close(servfd);
-	return err;
-}
-
-static int run_connect_test_case(const struct sock_addr_test *test)
-{
-	socklen_t addr_len = sizeof(struct sockaddr_storage);
-	struct sockaddr_storage expected_src_addr;
-	struct sockaddr_storage requested_addr;
-	struct sockaddr_storage expected_addr;
-	int clientfd = -1;
-	int servfd = -1;
-	int err = 0;
-
-	if (init_addrs(test, &requested_addr, &expected_addr,
-		       &expected_src_addr))
-		goto err;
-
-	/* Prepare server to connect to */
-	servfd = start_server(test->type, &expected_addr, addr_len);
-	if (servfd == -1)
-		goto err;
-
-	clientfd = connect_to_server(test->type, &requested_addr, addr_len);
-	if (clientfd == -1)
-		goto err;
-
-	/* Make sure src and dst addrs were overridden properly */
-	if (cmp_peer_addr(clientfd, &expected_addr))
-		goto err;
-
-	if (cmp_local_ip(clientfd, &expected_src_addr))
-		goto err;
-
-	if (test->type == SOCK_STREAM) {
-		/* Test TCP Fast Open scenario */
-		clientfd = fastconnect_to_server(&requested_addr, addr_len);
-		if (clientfd == -1)
-			goto err;
-
-		/* Make sure src and dst addrs were overridden properly */
-		if (cmp_peer_addr(clientfd, &expected_addr))
-			goto err;
-
-		if (cmp_local_ip(clientfd, &expected_src_addr))
-			goto err;
-	}
-
-	goto out;
-err:
-	err = -1;
-out:
-	close(clientfd);
-	close(servfd);
-	return err;
-}
-
-static int run_xmsg_test_case(const struct sock_addr_test *test, int max_cmsg)
-{
-	socklen_t addr_len = sizeof(struct sockaddr_storage);
-	struct sockaddr_storage expected_addr;
-	struct sockaddr_storage server_addr;
-	struct sockaddr_storage sendmsg_addr;
-	struct sockaddr_storage recvmsg_addr;
-	int clientfd = -1;
-	int servfd = -1;
-	int set_cmsg;
-	int err = 0;
-
-	if (test->type != SOCK_DGRAM)
-		goto err;
-
-	if (init_addrs(test, &sendmsg_addr, &server_addr, &expected_addr))
-		goto err;
-
-	/* Prepare server to sendmsg to */
-	servfd = start_server(test->type, &server_addr, addr_len);
-	if (servfd == -1)
-		goto err;
-
-	for (set_cmsg = 0; set_cmsg <= max_cmsg; ++set_cmsg) {
-		if (clientfd >= 0)
-			close(clientfd);
-
-		clientfd = sendmsg_to_server(test->type, &sendmsg_addr,
-					     addr_len, set_cmsg, /*flags*/0,
-					     &err);
-		if (err)
-			goto out;
-		else if (clientfd == -1)
-			goto err;
-
-		/* Try to receive message on server instead of using
-		 * getpeername(2) on client socket, to check that client's
-		 * destination address was rewritten properly, since
-		 * getpeername(2) doesn't work with unconnected datagram
-		 * sockets.
-		 *
-		 * Get source address from recvmsg(2) as well to make sure
-		 * source was rewritten properly: getsockname(2) can't be used
-		 * since socket is unconnected and source defined for one
-		 * specific packet may differ from the one used by default and
-		 * returned by getsockname(2).
-		 */
-		if (recvmsg_from_client(servfd, &recvmsg_addr) == -1)
-			goto err;
-
-		if (cmp_addr(&recvmsg_addr, &expected_addr, /*cmp_port*/0))
-			goto err;
-	}
-
-	goto out;
-err:
-	err = -1;
-out:
-	close(clientfd);
-	close(servfd);
-	return err;
-}
-
-static int run_test_case(int cgfd, const struct sock_addr_test *test)
-{
-	int progfd = -1;
-	int err = 0;
-
-	printf("Test case: %s .. ", test->descr);
-
-	progfd = test->loadfn(test);
-	if (test->expected_result == LOAD_REJECT && progfd < 0)
-		goto out;
-	else if (test->expected_result == LOAD_REJECT || progfd < 0)
-		goto err;
-
-	err = bpf_prog_attach(progfd, cgfd, test->attach_type,
-			      BPF_F_ALLOW_OVERRIDE);
-	if (test->expected_result == ATTACH_REJECT && err) {
-		err = 0; /* error was expected, reset it */
-		goto out;
-	} else if (test->expected_result == ATTACH_REJECT || err) {
-		goto err;
-	} else if (test->expected_result == ATTACH_OKAY) {
-		err = 0;
-		goto out;
-	}
-
-	switch (test->attach_type) {
-	case BPF_CGROUP_INET4_BIND:
-	case BPF_CGROUP_INET6_BIND:
-		err = run_bind_test_case(test);
-		break;
-	case BPF_CGROUP_INET4_CONNECT:
-	case BPF_CGROUP_INET6_CONNECT:
-		err = run_connect_test_case(test);
-		break;
-	case BPF_CGROUP_UDP4_SENDMSG:
-	case BPF_CGROUP_UDP6_SENDMSG:
-		err = run_xmsg_test_case(test, 1);
-		break;
-	case BPF_CGROUP_UDP4_RECVMSG:
-	case BPF_CGROUP_UDP6_RECVMSG:
-		err = run_xmsg_test_case(test, 0);
-		break;
-	default:
-		goto err;
-	}
-
-	if (test->expected_result == SYSCALL_EPERM && err == EPERM) {
-		err = 0; /* error was expected, reset it */
-		goto out;
-	}
-
-	if (test->expected_result == SYSCALL_ENOTSUPP && err == ENOTSUPP) {
-		err = 0; /* error was expected, reset it */
-		goto out;
-	}
-
-	if (err || test->expected_result != SUCCESS)
-		goto err;
-
-	goto out;
-err:
-	err = -1;
-out:
-	/* Detaching w/o checking return code: best effort attempt. */
-	if (progfd != -1)
-		bpf_prog_detach(cgfd, test->attach_type);
-	close(progfd);
-	printf("[%s]\n", err ? "FAIL" : "PASS");
-	return err;
-}
-
-static int run_tests(int cgfd)
-{
-	int passes = 0;
-	int fails = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(tests); ++i) {
-		if (run_test_case(cgfd, &tests[i]))
-			++fails;
-		else
-			++passes;
-	}
-	printf("Summary: %d PASSED, %d FAILED\n", passes, fails);
-	return fails ? -1 : 0;
-}
-
-int main(int argc, char **argv)
-{
-	int cgfd = -1;
-	int err = 0;
-
-	if (argc < 2) {
-		fprintf(stderr,
-			"%s has to be run via %s.sh. Skip direct run.\n",
-			argv[0], argv[0]);
-		exit(err);
-	}
-
-	cgfd = cgroup_setup_and_join(CG_PATH);
-	if (cgfd < 0)
-		goto err;
-
-	/* Use libbpf 1.0 API mode */
-	libbpf_set_strict_mode(LIBBPF_STRICT_ALL);
-
-	if (run_tests(cgfd))
-		goto err;
-
-	goto out;
-err:
-	err = -1;
-out:
-	close(cgfd);
-	cleanup_cgroup_environment();
-	return err;
-}
diff --git a/tools/testing/selftests/bpf/test_sock_addr.sh b/tools/testing/selftests/bpf/test_sock_addr.sh
deleted file mode 100755
index 3b9fdb8094aa..000000000000
--- a/tools/testing/selftests/bpf/test_sock_addr.sh
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-
-set -eu
-
-ping_once()
-{
-	type ping${1} >/dev/null 2>&1 && PING="ping${1}" || PING="ping -${1}"
-	$PING -q -c 1 -W 1 ${2%%/*} >/dev/null 2>&1
-}
-
-wait_for_ip()
-{
-	local _i
-	echo -n "Wait for testing IPv4/IPv6 to become available "
-	for _i in $(seq ${MAX_PING_TRIES}); do
-		echo -n "."
-		if ping_once 4 ${TEST_IPv4} && ping_once 6 ${TEST_IPv6}; then
-			echo " OK"
-			return
-		fi
-	done
-	echo 1>&2 "ERROR: Timeout waiting for test IP to become available."
-	exit 1
-}
-
-setup()
-{
-	# Create testing interfaces not to interfere with current environment.
-	ip link add dev ${TEST_IF} type veth peer name ${TEST_IF_PEER}
-	ip link set ${TEST_IF} up
-	ip link set ${TEST_IF_PEER} up
-
-	ip -4 addr add ${TEST_IPv4} dev ${TEST_IF}
-	ip -6 addr add ${TEST_IPv6} dev ${TEST_IF}
-	wait_for_ip
-}
-
-cleanup()
-{
-	ip link del ${TEST_IF} 2>/dev/null || :
-	ip link del ${TEST_IF_PEER} 2>/dev/null || :
-}
-
-main()
-{
-	trap cleanup EXIT 2 3 6 15
-	setup
-	./test_sock_addr setup_done
-}
-
-BASENAME=$(basename $0 .sh)
-TEST_IF="${BASENAME}1"
-TEST_IF_PEER="${BASENAME}2"
-TEST_IPv4="127.0.0.4/8"
-TEST_IPv6="::6/128"
-MAX_PING_TRIES=5
-
-main
diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c
index 024a0faafb3b..92752f5eeded 100644
--- a/tools/testing/selftests/bpf/test_sockmap.c
+++ b/tools/testing/selftests/bpf/test_sockmap.c
@@ -1887,10 +1887,13 @@ static int check_whitelist(struct _test *t, struct sockmap_options *opt)
 	while (entry) {
 		if ((opt->prepend && strstr(opt->prepend, entry) != 0) ||
 		    strstr(opt->map, entry) != 0 ||
-		    strstr(t->title, entry) != 0)
+		    strstr(t->title, entry) != 0) {
+			free(ptr);
 			return 0;
+		}
 		entry = strtok(NULL, ",");
 	}
+	free(ptr);
 	return -EINVAL;
 }
 
@@ -1907,10 +1910,13 @@ static int check_blacklist(struct _test *t, struct sockmap_options *opt)
 	while (entry) {
 		if ((opt->prepend && strstr(opt->prepend, entry) != 0) ||
 		    strstr(opt->map, entry) != 0 ||
-		    strstr(t->title, entry) != 0)
+		    strstr(t->title, entry) != 0) {
+			free(ptr);
 			return 0;
+		}
 		entry = strtok(NULL, ",");
 	}
+	free(ptr);
 	return -EINVAL;
 }
 
@@ -2104,9 +2110,9 @@ out:
 		free(options.whitelist);
 	if (options.blacklist)
 		free(options.blacklist);
+	close(cg_fd);
 	if (cg_created)
 		cleanup_cgroup_environment();
-	close(cg_fd);
 	return err;
 }
 
diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index 910044f08908..7989ec608454 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -72,7 +72,6 @@ cleanup() {
 server_listen() {
 	ip netns exec "${ns2}" nc "${netcat_opt}" -l "${port}" > "${outfile}" &
 	server_pid=$!
-	sleep 0.2
 }
 
 client_connect() {
@@ -93,6 +92,16 @@ verify_data() {
 	fi
 }
 
+wait_for_port() {
+	for i in $(seq 20); do
+		if ip netns exec "${ns2}" ss ${2:--4}OHntl | grep -q "$1"; then
+			return 0
+		fi
+		sleep 0.1
+	done
+	return 1
+}
+
 set -e
 
 # no arguments: automated test, run all
@@ -193,6 +202,7 @@ setup
 # basic communication works
 echo "test basic connectivity"
 server_listen
+wait_for_port ${port} ${netcat_opt}
 client_connect
 verify_data
 
@@ -204,6 +214,7 @@ ip netns exec "${ns1}" tc filter add dev veth1 egress \
 	section "encap_${tuntype}_${mac}"
 echo "test bpf encap without decap (expect failure)"
 server_listen
+wait_for_port ${port} ${netcat_opt}
 ! client_connect
 
 if [[ "$tuntype" =~ "udp" ]]; then
diff --git a/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c b/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c
index 32df93747095..7b5fc98838cd 100644
--- a/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c
+++ b/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c
@@ -16,68 +16,7 @@
 #include <bpf/libbpf.h>
 
 #include "cgroup_helpers.h"
-
-static int start_server(const struct sockaddr *addr, socklen_t len, bool dual)
-{
-	int mode = !dual;
-	int fd;
-
-	fd = socket(addr->sa_family, SOCK_STREAM, 0);
-	if (fd == -1) {
-		log_err("Failed to create server socket");
-		goto out;
-	}
-
-	if (addr->sa_family == AF_INET6) {
-		if (setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&mode,
-			       sizeof(mode)) == -1) {
-			log_err("Failed to set the dual-stack mode");
-			goto close_out;
-		}
-	}
-
-	if (bind(fd, addr, len) == -1) {
-		log_err("Failed to bind server socket");
-		goto close_out;
-	}
-
-	if (listen(fd, 128) == -1) {
-		log_err("Failed to listen on server socket");
-		goto close_out;
-	}
-
-	goto out;
-
-close_out:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
-
-static int connect_to_server(const struct sockaddr *addr, socklen_t len)
-{
-	int fd = -1;
-
-	fd = socket(addr->sa_family, SOCK_STREAM, 0);
-	if (fd == -1) {
-		log_err("Failed to create client socket");
-		goto out;
-	}
-
-	if (connect(fd, (const struct sockaddr *)addr, len) == -1) {
-		log_err("Fail to connect to server");
-		goto close_out;
-	}
-
-	goto out;
-
-close_out:
-	close(fd);
-	fd = -1;
-out:
-	return fd;
-}
+#include "network_helpers.h"
 
 static int get_map_fd_by_prog_id(int prog_id, bool *xdp)
 {
@@ -117,8 +56,7 @@ err:
 	return map_fd;
 }
 
-static int run_test(int server_fd, int results_fd, bool xdp,
-		    const struct sockaddr *addr, socklen_t len)
+static int run_test(int server_fd, int results_fd, bool xdp)
 {
 	int client = -1, srv_client = -1;
 	int ret = 0;
@@ -144,7 +82,7 @@ static int run_test(int server_fd, int results_fd, bool xdp,
 		goto err;
 	}
 
-	client = connect_to_server(addr, len);
+	client = connect_to_fd(server_fd, 0);
 	if (client == -1)
 		goto err;
 
@@ -201,23 +139,23 @@ out:
 	return ret;
 }
 
-static bool get_port(int server_fd, in_port_t *port)
+static int v6only_true(int fd, const struct post_socket_opts *opts)
 {
-	struct sockaddr_in addr;
-	socklen_t len = sizeof(addr);
+	int mode = true;
 
-	if (getsockname(server_fd, (struct sockaddr *)&addr, &len)) {
-		log_err("Failed to get server addr");
-		return false;
-	}
+	return setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &mode, sizeof(mode));
+}
+
+static int v6only_false(int fd, const struct post_socket_opts *opts)
+{
+	int mode = false;
 
-	/* sin_port and sin6_port are located at the same offset. */
-	*port = addr.sin_port;
-	return true;
+	return setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &mode, sizeof(mode));
 }
 
 int main(int argc, char **argv)
 {
+	struct network_helper_opts opts = { 0 };
 	struct sockaddr_in addr4;
 	struct sockaddr_in6 addr6;
 	struct sockaddr_in addr4dual;
@@ -259,31 +197,30 @@ int main(int argc, char **argv)
 	addr6dual.sin6_addr = in6addr_any;
 	addr6dual.sin6_port = 0;
 
-	server = start_server((const struct sockaddr *)&addr4, sizeof(addr4),
-			      false);
-	if (server == -1 || !get_port(server, &addr4.sin_port))
+	server = start_server_addr(SOCK_STREAM, (struct sockaddr_storage *)&addr4,
+				   sizeof(addr4), NULL);
+	if (server == -1)
 		goto err;
 
-	server_v6 = start_server((const struct sockaddr *)&addr6,
-				 sizeof(addr6), false);
-	if (server_v6 == -1 || !get_port(server_v6, &addr6.sin6_port))
+	opts.post_socket_cb = v6only_true;
+	server_v6 = start_server_addr(SOCK_STREAM, (struct sockaddr_storage *)&addr6,
+				      sizeof(addr6), &opts);
+	if (server_v6 == -1)
 		goto err;
 
-	server_dual = start_server((const struct sockaddr *)&addr6dual,
-				   sizeof(addr6dual), true);
-	if (server_dual == -1 || !get_port(server_dual, &addr4dual.sin_port))
+	opts.post_socket_cb = v6only_false;
+	server_dual = start_server_addr(SOCK_STREAM, (struct sockaddr_storage *)&addr6dual,
+					sizeof(addr6dual), &opts);
+	if (server_dual == -1)
 		goto err;
 
-	if (run_test(server, results, xdp,
-		     (const struct sockaddr *)&addr4, sizeof(addr4)))
+	if (run_test(server, results, xdp))
 		goto err;
 
-	if (run_test(server_v6, results, xdp,
-		     (const struct sockaddr *)&addr6, sizeof(addr6)))
+	if (run_test(server_v6, results, xdp))
 		goto err;
 
-	if (run_test(server_dual, results, xdp,
-		     (const struct sockaddr *)&addr4dual, sizeof(addr4dual)))
+	if (run_test(server_dual, results, xdp))
 		goto err;
 
 	printf("ok\n");
diff --git a/tools/testing/selftests/bpf/testing_helpers.c b/tools/testing/selftests/bpf/testing_helpers.c
index 28b6646662af..d5379a0e6da8 100644
--- a/tools/testing/selftests/bpf/testing_helpers.c
+++ b/tools/testing/selftests/bpf/testing_helpers.c
@@ -368,9 +368,23 @@ int delete_module(const char *name, int flags)
 
 int unload_bpf_testmod(bool verbose)
 {
+	int ret, cnt = 0;
+
 	if (kern_sync_rcu())
 		fprintf(stdout, "Failed to trigger kernel-side RCU sync!\n");
-	if (delete_module("bpf_testmod", 0)) {
+
+	for (;;) {
+		ret = delete_module("bpf_testmod", 0);
+		if (!ret || errno != EAGAIN)
+			break;
+		if (++cnt > 10000) {
+			fprintf(stdout, "Unload of bpf_testmod timed out\n");
+			break;
+		}
+		usleep(100);
+	}
+
+	if (ret) {
 		if (errno == ENOENT) {
 			if (verbose)
 				fprintf(stdout, "bpf_testmod.ko is already unloaded.\n");
diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c
index 27fd7ed3e4b0..70e29f316fe7 100644
--- a/tools/testing/selftests/bpf/trace_helpers.c
+++ b/tools/testing/selftests/bpf/trace_helpers.c
@@ -61,12 +61,7 @@ void free_kallsyms_local(struct ksyms *ksyms)
 	free(ksyms);
 }
 
-static int ksym_cmp(const void *p1, const void *p2)
-{
-	return ((struct ksym *)p1)->addr - ((struct ksym *)p2)->addr;
-}
-
-struct ksyms *load_kallsyms_local(void)
+static struct ksyms *load_kallsyms_local_common(ksym_cmp_t cmp_cb)
 {
 	FILE *f;
 	char func[256], buf[256];
@@ -100,7 +95,7 @@ struct ksyms *load_kallsyms_local(void)
 			goto error;
 	}
 	fclose(f);
-	qsort(ksyms->syms, ksyms->sym_cnt, sizeof(struct ksym), ksym_cmp);
+	qsort(ksyms->syms, ksyms->sym_cnt, sizeof(struct ksym), cmp_cb);
 	return ksyms;
 
 error:
@@ -109,6 +104,21 @@ error:
 	return NULL;
 }
 
+static int ksym_cmp(const void *p1, const void *p2)
+{
+	return ((struct ksym *)p1)->addr - ((struct ksym *)p2)->addr;
+}
+
+struct ksyms *load_kallsyms_local(void)
+{
+	return load_kallsyms_local_common(ksym_cmp);
+}
+
+struct ksyms *load_kallsyms_custom_local(ksym_cmp_t cmp_cb)
+{
+	return load_kallsyms_local_common(cmp_cb);
+}
+
 int load_kallsyms(void)
 {
 	pthread_mutex_lock(&ksyms_mutex);
@@ -148,6 +158,28 @@ struct ksym *ksym_search_local(struct ksyms *ksyms, long key)
 	return &ksyms->syms[0];
 }
 
+struct ksym *search_kallsyms_custom_local(struct ksyms *ksyms, const void *p,
+					  ksym_search_cmp_t cmp_cb)
+{
+	int start = 0, mid, end = ksyms->sym_cnt;
+	struct ksym *ks;
+	int result;
+
+	while (start < end) {
+		mid = start + (end - start) / 2;
+		ks = &ksyms->syms[mid];
+		result = cmp_cb(p, ks);
+		if (result < 0)
+			end = mid;
+		else if (result > 0)
+			start = mid + 1;
+		else
+			return ks;
+	}
+
+	return NULL;
+}
+
 struct ksym *ksym_search(long key)
 {
 	if (!ksyms)
@@ -201,29 +233,6 @@ out:
 	return err;
 }
 
-void read_trace_pipe(void)
-{
-	int trace_fd;
-
-	if (access(TRACEFS_PIPE, F_OK) == 0)
-		trace_fd = open(TRACEFS_PIPE, O_RDONLY, 0);
-	else
-		trace_fd = open(DEBUGFS_PIPE, O_RDONLY, 0);
-	if (trace_fd < 0)
-		return;
-
-	while (1) {
-		static char buf[4096];
-		ssize_t sz;
-
-		sz = read(trace_fd, buf, sizeof(buf) - 1);
-		if (sz > 0) {
-			buf[sz] = 0;
-			puts(buf);
-		}
-	}
-}
-
 ssize_t get_uprobe_offset(const void *addr)
 {
 	size_t start, end, base;
@@ -381,3 +390,43 @@ out:
 	close(fd);
 	return err;
 }
+
+int read_trace_pipe_iter(void (*cb)(const char *str, void *data), void *data, int iter)
+{
+	size_t buflen, n;
+	char *buf = NULL;
+	FILE *fp = NULL;
+
+	if (access(TRACEFS_PIPE, F_OK) == 0)
+		fp = fopen(TRACEFS_PIPE, "r");
+	else
+		fp = fopen(DEBUGFS_PIPE, "r");
+	if (!fp)
+		return -1;
+
+	 /* We do not want to wait forever when iter is specified. */
+	if (iter)
+		fcntl(fileno(fp), F_SETFL, O_NONBLOCK);
+
+	while ((n = getline(&buf, &buflen, fp) >= 0) || errno == EAGAIN) {
+		if (n > 0)
+			cb(buf, data);
+		if (iter && !(--iter))
+			break;
+	}
+
+	free(buf);
+	if (fp)
+		fclose(fp);
+	return 0;
+}
+
+static void trace_pipe_cb(const char *str, void *data)
+{
+	printf("%s", str);
+}
+
+void read_trace_pipe(void)
+{
+	read_trace_pipe_iter(trace_pipe_cb, NULL, 0);
+}
diff --git a/tools/testing/selftests/bpf/trace_helpers.h b/tools/testing/selftests/bpf/trace_helpers.h
index 04fd1da7079d..2ce873c9f9aa 100644
--- a/tools/testing/selftests/bpf/trace_helpers.h
+++ b/tools/testing/selftests/bpf/trace_helpers.h
@@ -13,6 +13,9 @@ struct ksym {
 };
 struct ksyms;
 
+typedef int (*ksym_cmp_t)(const void *p1, const void *p2);
+typedef int (*ksym_search_cmp_t)(const void *p1, const struct ksym *p2);
+
 int load_kallsyms(void);
 struct ksym *ksym_search(long key);
 long ksym_get_addr(const char *name);
@@ -22,10 +25,16 @@ struct ksym *ksym_search_local(struct ksyms *ksyms, long key);
 long ksym_get_addr_local(struct ksyms *ksyms, const char *name);
 void free_kallsyms_local(struct ksyms *ksyms);
 
+struct ksyms *load_kallsyms_custom_local(ksym_cmp_t cmp_cb);
+struct ksym *search_kallsyms_custom_local(struct ksyms *ksyms, const void *p1,
+					  ksym_search_cmp_t cmp_cb);
+
 /* open kallsyms and find addresses on the fly, faster than load + search. */
 int kallsyms_find(const char *sym, unsigned long long *addr);
 
 void read_trace_pipe(void);
+int read_trace_pipe_iter(void (*cb)(const char *str, void *data),
+			 void *data, int iter);
 
 ssize_t get_uprobe_offset(const void *addr);
 ssize_t get_rel_offset(uintptr_t addr);
diff --git a/tools/testing/selftests/bpf/uprobe_multi.c b/tools/testing/selftests/bpf/uprobe_multi.c
index a61ceab60b68..7ffa563ffeba 100644
--- a/tools/testing/selftests/bpf/uprobe_multi.c
+++ b/tools/testing/selftests/bpf/uprobe_multi.c
@@ -9,7 +9,7 @@
 
 #define NAME(name, idx) PASTE(name, idx)
 
-#define DEF(name, idx)  int NAME(name, idx)(void) { return 0; }
+#define DEF(name, idx) int __attribute__((weak)) NAME(name, idx)(void) { return 0; }
 #define CALL(name, idx) NAME(name, idx)();
 
 #define F(body, name, idx) body(name, idx)
diff --git a/tools/testing/selftests/bpf/veristat.c b/tools/testing/selftests/bpf/veristat.c
index 244d4996e06e..b2854238d4a0 100644
--- a/tools/testing/selftests/bpf/veristat.c
+++ b/tools/testing/selftests/bpf/veristat.c
@@ -792,10 +792,13 @@ static int parse_stats(const char *stats_str, struct stat_specs *specs)
 
 	while ((next = strtok_r(state ? NULL : input, ",", &state))) {
 		err = parse_stat(next, specs);
-		if (err)
+		if (err) {
+			free(input);
 			return err;
+		}
 	}
 
+	free(input);
 	return 0;
 }
 
diff --git a/tools/testing/selftests/bpf/xdp_hw_metadata.c b/tools/testing/selftests/bpf/xdp_hw_metadata.c
index bdf5d8180067..6f9956eed797 100644
--- a/tools/testing/selftests/bpf/xdp_hw_metadata.c
+++ b/tools/testing/selftests/bpf/xdp_hw_metadata.c
@@ -495,20 +495,6 @@ peek:
 	return 0;
 }
 
-struct ethtool_channels {
-	__u32	cmd;
-	__u32	max_rx;
-	__u32	max_tx;
-	__u32	max_other;
-	__u32	max_combined;
-	__u32	rx_count;
-	__u32	tx_count;
-	__u32	other_count;
-	__u32	combined_count;
-};
-
-#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
-
 static int rxq_num(const char *ifname)
 {
 	struct ethtool_channels ch = {
@@ -595,6 +581,8 @@ static void cleanup(void)
 
 	if (bpf_obj)
 		xdp_hw_metadata__destroy(bpf_obj);
+
+	free((void *)saved_hwtstamp_ifname);
 }
 
 static void handle_signal(int sig)
diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
index b1102ee13faa..2eac0895b0a1 100644
--- a/tools/testing/selftests/bpf/xskxceiver.c
+++ b/tools/testing/selftests/bpf/xskxceiver.c
@@ -81,6 +81,7 @@
 #include <linux/mman.h>
 #include <linux/netdev.h>
 #include <linux/bitmap.h>
+#include <linux/ethtool.h>
 #include <arpa/inet.h>
 #include <net/if.h>
 #include <locale.h>
@@ -105,11 +106,15 @@
 #include "../kselftest.h"
 #include "xsk_xdp_common.h"
 
+#include <network_helpers.h>
+
 static bool opt_verbose;
 static bool opt_print_tests;
 static enum test_mode opt_mode = TEST_MODE_ALL;
 static u32 opt_run_test = RUN_ALL_TESTS;
 
+void test__fail(void) { /* for network_helpers.c */ }
+
 static void __exit_with_error(int error, const char *file, const char *func, int line)
 {
 	ksft_test_result_fail("[%s:%s:%i]: ERROR: %d/\"%s\"\n", file, func, line, error,
@@ -239,7 +244,7 @@ static void enable_busy_poll(struct xsk_socket_info *xsk)
 		       (void *)&sock_opt, sizeof(sock_opt)) < 0)
 		exit_with_error(errno);
 
-	sock_opt = BATCH_SIZE;
+	sock_opt = xsk->batch_size;
 	if (setsockopt(xsk_socket__fd(xsk->xsk), SOL_SOCKET, SO_BUSY_POLL_BUDGET,
 		       (void *)&sock_opt, sizeof(sock_opt)) < 0)
 		exit_with_error(errno);
@@ -409,6 +414,33 @@ static void parse_command_line(struct ifobject *ifobj_tx, struct ifobject *ifobj
 	}
 }
 
+static int set_ring_size(struct ifobject *ifobj)
+{
+	int ret;
+	u32 ctr = 0;
+
+	while (ctr++ < SOCK_RECONF_CTR) {
+		ret = set_hw_ring_size(ifobj->ifname, &ifobj->ring);
+		if (!ret)
+			break;
+
+		/* Retry if it fails */
+		if (ctr >= SOCK_RECONF_CTR || errno != EBUSY)
+			return -errno;
+
+		usleep(USLEEP_MAX);
+	}
+
+	return ret;
+}
+
+static int hw_ring_size_reset(struct ifobject *ifobj)
+{
+	ifobj->ring.tx_pending = ifobj->set_ring.default_tx;
+	ifobj->ring.rx_pending = ifobj->set_ring.default_rx;
+	return set_ring_size(ifobj);
+}
+
 static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
 			     struct ifobject *ifobj_rx)
 {
@@ -439,6 +471,7 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
 		for (j = 0; j < MAX_SOCKETS; j++) {
 			memset(&ifobj->xsk_arr[j], 0, sizeof(ifobj->xsk_arr[j]));
 			ifobj->xsk_arr[j].rxqsize = XSK_RING_CONS__DEFAULT_NUM_DESCS;
+			ifobj->xsk_arr[j].batch_size = DEFAULT_BATCH_SIZE;
 			if (i == 0)
 				ifobj->xsk_arr[j].pkt_stream = test->tx_pkt_stream_default;
 			else
@@ -451,12 +484,16 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
 		}
 	}
 
+	if (ifobj_tx->hw_ring_size_supp)
+		hw_ring_size_reset(ifobj_tx);
+
 	test->ifobj_tx = ifobj_tx;
 	test->ifobj_rx = ifobj_rx;
 	test->current_step = 0;
 	test->total_steps = 1;
 	test->nb_sockets = 1;
 	test->fail = false;
+	test->set_ring = false;
 	test->mtu = MAX_ETH_PKT_SIZE;
 	test->xdp_prog_rx = ifobj_rx->xdp_progs->progs.xsk_def_prog;
 	test->xskmap_rx = ifobj_rx->xdp_progs->maps.xsk;
@@ -1087,7 +1124,7 @@ static int __receive_pkts(struct test_spec *test, struct xsk_socket_info *xsk)
 			return TEST_CONTINUE;
 	}
 
-	rcvd = xsk_ring_cons__peek(&xsk->rx, BATCH_SIZE, &idx_rx);
+	rcvd = xsk_ring_cons__peek(&xsk->rx, xsk->batch_size, &idx_rx);
 	if (!rcvd)
 		return TEST_CONTINUE;
 
@@ -1239,7 +1276,8 @@ static int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, b
 
 	buffer_len = pkt_get_buffer_len(umem, pkt_stream->max_pkt_len);
 	/* pkts_in_flight might be negative if many invalid packets are sent */
-	if (pkts_in_flight >= (int)((umem_size(umem) - BATCH_SIZE * buffer_len) / buffer_len)) {
+	if (pkts_in_flight >= (int)((umem_size(umem) - xsk->batch_size * buffer_len) /
+	    buffer_len)) {
 		ret = kick_tx(xsk);
 		if (ret)
 			return TEST_FAILURE;
@@ -1249,7 +1287,7 @@ static int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, b
 	fds.fd = xsk_socket__fd(xsk->xsk);
 	fds.events = POLLOUT;
 
-	while (xsk_ring_prod__reserve(&xsk->tx, BATCH_SIZE, &idx) < BATCH_SIZE) {
+	while (xsk_ring_prod__reserve(&xsk->tx, xsk->batch_size, &idx) < xsk->batch_size) {
 		if (use_poll) {
 			ret = poll(&fds, 1, POLL_TMOUT);
 			if (timeout) {
@@ -1269,10 +1307,10 @@ static int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, b
 			}
 		}
 
-		complete_pkts(xsk, BATCH_SIZE);
+		complete_pkts(xsk, xsk->batch_size);
 	}
 
-	for (i = 0; i < BATCH_SIZE; i++) {
+	for (i = 0; i < xsk->batch_size; i++) {
 		struct pkt *pkt = pkt_stream_get_next_tx_pkt(pkt_stream);
 		u32 nb_frags_left, nb_frags, bytes_written = 0;
 
@@ -1280,9 +1318,9 @@ static int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, b
 			break;
 
 		nb_frags = pkt_nb_frags(umem->frame_size, pkt_stream, pkt);
-		if (nb_frags > BATCH_SIZE - i) {
+		if (nb_frags > xsk->batch_size - i) {
 			pkt_stream_cancel(pkt_stream);
-			xsk_ring_prod__cancel(&xsk->tx, BATCH_SIZE - i);
+			xsk_ring_prod__cancel(&xsk->tx, xsk->batch_size - i);
 			break;
 		}
 		nb_frags_left = nb_frags;
@@ -1370,7 +1408,7 @@ static int wait_for_tx_completion(struct xsk_socket_info *xsk)
 			return TEST_FAILURE;
 		}
 
-		complete_pkts(xsk, BATCH_SIZE);
+		complete_pkts(xsk, xsk->batch_size);
 	}
 
 	return TEST_PASS;
@@ -1860,6 +1898,14 @@ static int testapp_validate_traffic(struct test_spec *test)
 		return TEST_SKIP;
 	}
 
+	if (test->set_ring) {
+		if (ifobj_tx->hw_ring_size_supp)
+			return set_ring_size(ifobj_tx);
+
+	ksft_test_result_skip("Changing HW ring size not supported.\n");
+	return TEST_SKIP;
+	}
+
 	xsk_attach_xdp_progs(test, ifobj_rx, ifobj_tx);
 	return __testapp_validate_traffic(test, ifobj_rx, ifobj_tx);
 }
@@ -2373,6 +2419,50 @@ static int testapp_xdp_metadata_mb(struct test_spec *test)
 	return testapp_xdp_metadata_copy(test);
 }
 
+static int testapp_hw_sw_min_ring_size(struct test_spec *test)
+{
+	int ret;
+
+	test->set_ring = true;
+	test->total_steps = 2;
+	test->ifobj_tx->ring.tx_pending = DEFAULT_BATCH_SIZE;
+	test->ifobj_tx->ring.rx_pending = DEFAULT_BATCH_SIZE * 2;
+	test->ifobj_tx->xsk->batch_size = 1;
+	test->ifobj_rx->xsk->batch_size = 1;
+	ret = testapp_validate_traffic(test);
+	if (ret)
+		return ret;
+
+	/* Set batch size to hw_ring_size - 1 */
+	test->ifobj_tx->xsk->batch_size = DEFAULT_BATCH_SIZE - 1;
+	test->ifobj_rx->xsk->batch_size = DEFAULT_BATCH_SIZE - 1;
+	return testapp_validate_traffic(test);
+}
+
+static int testapp_hw_sw_max_ring_size(struct test_spec *test)
+{
+	u32 max_descs = XSK_RING_PROD__DEFAULT_NUM_DESCS * 2;
+	int ret;
+
+	test->set_ring = true;
+	test->total_steps = 2;
+	test->ifobj_tx->ring.tx_pending = test->ifobj_tx->ring.tx_max_pending;
+	test->ifobj_tx->ring.rx_pending  = test->ifobj_tx->ring.rx_max_pending;
+	test->ifobj_rx->umem->num_frames = max_descs;
+	test->ifobj_rx->xsk->rxqsize = max_descs;
+	test->ifobj_tx->xsk->batch_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+	test->ifobj_rx->xsk->batch_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+
+	ret = testapp_validate_traffic(test);
+	if (ret)
+		return ret;
+
+	/* Set batch_size to 4095 */
+	test->ifobj_tx->xsk->batch_size = max_descs - 1;
+	test->ifobj_rx->xsk->batch_size = max_descs - 1;
+	return testapp_validate_traffic(test);
+}
+
 static void run_pkt_test(struct test_spec *test)
 {
 	int ret;
@@ -2477,7 +2567,9 @@ static const struct test_spec tests[] = {
 	{.name = "ALIGNED_INV_DESC_MULTI_BUFF", .test_func = testapp_aligned_inv_desc_mb},
 	{.name = "UNALIGNED_INV_DESC_MULTI_BUFF", .test_func = testapp_unaligned_inv_desc_mb},
 	{.name = "TOO_MANY_FRAGS", .test_func = testapp_too_many_frags},
-};
+	{.name = "HW_SW_MIN_RING_SIZE", .test_func = testapp_hw_sw_min_ring_size},
+	{.name = "HW_SW_MAX_RING_SIZE", .test_func = testapp_hw_sw_max_ring_size},
+	};
 
 static void print_tests(void)
 {
@@ -2497,6 +2589,7 @@ int main(int argc, char **argv)
 	int modes = TEST_MODE_SKB + 1;
 	struct test_spec test;
 	bool shared_netdev;
+	int ret;
 
 	/* Use libbpf 1.0 API mode */
 	libbpf_set_strict_mode(LIBBPF_STRICT_ALL);
@@ -2534,6 +2627,13 @@ int main(int argc, char **argv)
 			modes++;
 	}
 
+	ret = get_hw_ring_size(ifobj_tx->ifname, &ifobj_tx->ring);
+	if (!ret) {
+		ifobj_tx->hw_ring_size_supp = true;
+		ifobj_tx->set_ring.default_tx = ifobj_tx->ring.tx_pending;
+		ifobj_tx->set_ring.default_rx = ifobj_tx->ring.rx_pending;
+	}
+
 	init_iface(ifobj_rx, worker_testapp_validate_rx);
 	init_iface(ifobj_tx, worker_testapp_validate_tx);
 
@@ -2581,6 +2681,9 @@ int main(int argc, char **argv)
 		}
 	}
 
+	if (ifobj_tx->hw_ring_size_supp)
+		hw_ring_size_reset(ifobj_tx);
+
 	pkt_stream_delete(tx_pkt_stream_default);
 	pkt_stream_delete(rx_pkt_stream_default);
 	xsk_unload_xdp_programs(ifobj_tx);
diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h
index f174df2d693f..906de5fab7a3 100644
--- a/tools/testing/selftests/bpf/xskxceiver.h
+++ b/tools/testing/selftests/bpf/xskxceiver.h
@@ -44,7 +44,7 @@
 #define MAX_ETH_JUMBO_SIZE 9000
 #define USLEEP_MAX 10000
 #define SOCK_RECONF_CTR 10
-#define BATCH_SIZE 64
+#define DEFAULT_BATCH_SIZE 64
 #define POLL_TMOUT 1000
 #define THREAD_TMOUT 3
 #define DEFAULT_PKT_CNT (4 * 1024)
@@ -91,6 +91,7 @@ struct xsk_socket_info {
 	struct pkt_stream *pkt_stream;
 	u32 outstanding_tx;
 	u32 rxqsize;
+	u32 batch_size;
 	u8 dst_mac[ETH_ALEN];
 	u8 src_mac[ETH_ALEN];
 };
@@ -113,6 +114,11 @@ struct pkt_stream {
 	bool verbatim;
 };
 
+struct set_hw_ring {
+	u32 default_tx;
+	u32 default_rx;
+};
+
 struct ifobject;
 struct test_spec;
 typedef int (*validation_func_t)(struct ifobject *ifobj);
@@ -129,6 +135,8 @@ struct ifobject {
 	struct xsk_xdp_progs *xdp_progs;
 	struct bpf_map *xskmap;
 	struct bpf_program *xdp_prog;
+	struct ethtool_ringparam ring;
+	struct set_hw_ring set_ring;
 	enum test_mode mode;
 	int ifindex;
 	int mtu;
@@ -145,6 +153,7 @@ struct ifobject {
 	bool unaligned_supp;
 	bool multi_buff_supp;
 	bool multi_buff_zc_supp;
+	bool hw_ring_size_supp;
 };
 
 struct test_spec {
@@ -162,6 +171,7 @@ struct test_spec {
 	u16 current_step;
 	u16 nb_sockets;
 	bool fail;
+	bool set_ring;
 	enum test_mode mode;
 	char name[MAX_TEST_NAME_SIZE];
 };
diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile
new file mode 100644
index 000000000000..e54f382bcb02
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+TEST_INCLUDES := $(wildcard lib/py/*.py)
+
+TEST_PROGS := \
+	ping.py \
+	queues.py \
+	stats.py \
+# end of TEST_PROGS
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/README.rst b/tools/testing/selftests/drivers/net/README.rst
new file mode 100644
index 000000000000..3b6a29e6564b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/README.rst
@@ -0,0 +1,136 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Running driver tests
+====================
+
+Networking driver tests are executed within kselftest framework like any
+other tests. They support testing both real device drivers and emulated /
+software drivers (latter mostly to test the core parts of the stack).
+
+SW mode
+~~~~~~~
+
+By default, when no extra parameters are set or exported, tests execute
+against software drivers such as netdevsim. No extra preparation is required
+the software devices are created and destroyed as part of the test.
+In this mode the tests are indistinguishable from other selftests and
+(for example) can be run under ``virtme-ng`` like the core networking selftests.
+
+HW mode
+~~~~~~~
+
+Executing tests against a real device requires external preparation.
+The netdevice against which tests will be run must exist, be running
+(in UP state) and be configured with an IP address.
+
+Refer to list of :ref:`Variables` later in this file to set up running
+the tests against a real device.
+
+Both modes required
+~~~~~~~~~~~~~~~~~~~
+
+All tests in drivers/net must support running both against a software device
+and a real device. SW-only tests should instead be placed in net/ or
+drivers/net/netdevsim, HW-only tests in drivers/net/hw.
+
+Variables
+=========
+
+The variables can be set in the environment or by creating a net.config
+file in the same directory as this README file. Example::
+
+  $ NETIF=eth0 ./some_test.sh
+
+or::
+
+  $ cat tools/testing/selftests/drivers/net/net.config
+  # Variable set in a file
+  NETIF=eth0
+
+Local test (which don't require endpoint for sending / receiving traffic)
+need only the ``NETIF`` variable. Remaining variables define the endpoint
+and communication method.
+
+NETIF
+~~~~~
+
+Name of the netdevice against which the test should be executed.
+When empty or not set software devices will be used.
+
+LOCAL_V4, LOCAL_V6, REMOTE_V4, REMOTE_V6
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Local and remote endpoint IP addresses.
+
+REMOTE_TYPE
+~~~~~~~~~~~
+
+Communication method used to run commands on the remote endpoint.
+Test framework has built-in support for ``netns`` and ``ssh`` channels.
+``netns`` assumes the "remote" interface is part of the same
+host, just moved to the specified netns.
+``ssh`` communicates with remote endpoint over ``ssh`` and ``scp``.
+Using persistent SSH connections is strongly encouraged to avoid
+the latency of SSH connection setup on every command.
+
+Communication methods are defined by classes in ``lib/py/remote_{name}.py``.
+It should be possible to add a new method without modifying any of
+the framework, by simply adding an appropriately named file to ``lib/py``.
+
+REMOTE_ARGS
+~~~~~~~~~~~
+
+Arguments used to construct the communication channel.
+Communication channel dependent::
+
+  for netns - name of the "remote" namespace
+  for ssh - name/address of the remote host
+
+Example
+=======
+
+Build the selftests::
+
+  # make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw"
+
+"Install" the tests and copy them over to the target machine::
+
+  # make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \
+     install INSTALL_PATH=/tmp/ksft-net-drv
+
+  # rsync -ra --delete /tmp/ksft-net-drv root@192.168.1.1:/root/
+
+On the target machine, running the tests will use netdevsim by default::
+
+  [/root] # ./ksft-net-drv/run_kselftest.sh -t drivers/net:ping.py
+  TAP version 13
+  1..1
+  # timeout set to 45
+  # selftests: drivers/net: ping.py
+  # KTAP version 1
+  # 1..3
+  # ok 1 ping.test_v4
+  # ok 2 ping.test_v6
+  # ok 3 ping.test_tcp
+  # # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
+  ok 1 selftests: drivers/net: ping.py
+
+Create a config with remote info::
+
+  [/root] # cat > ./ksft-net-drv/drivers/net/net.config <<EOF
+  NETIF=eth0
+  LOCAL_V4=192.168.1.1
+  REMOTE_V4=192.168.1.2
+  REMOTE_TYPE=ssh
+  REMOTE_ARGS=root@192.168.1.2
+  EOF
+
+Run the test::
+
+  [/root] # ./ksft-net-drv/drivers/net/ping.py
+  KTAP version 1
+  1..3
+  ok 1 ping.test_v4
+  ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
+  ok 3 ping.test_tcp
+  # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:1 error:0
diff --git a/tools/testing/selftests/drivers/net/config b/tools/testing/selftests/drivers/net/config
new file mode 100644
index 000000000000..f6a58ce8a230
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/config
@@ -0,0 +1,2 @@
+CONFIG_IPV6=y
+CONFIG_NETDEVSIM=m
diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile
new file mode 100644
index 000000000000..4933d045ab66
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/Makefile
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+TEST_PROGS = \
+	csum.py \
+	devlink_port_split.py \
+	ethtool.sh \
+	ethtool_extended_state.sh \
+	ethtool_mm.sh \
+	ethtool_rmon.sh \
+	hw_stats_l3.sh \
+	hw_stats_l3_gre.sh \
+	loopback.sh \
+	pp_alloc_fail.py \
+	#
+
+TEST_FILES := \
+	ethtool_lib.sh \
+	#
+
+TEST_INCLUDES := \
+	$(wildcard lib/py/*.py ../lib/py/*.py) \
+	../../../net/lib.sh \
+	../../../net/forwarding/lib.sh \
+	../../../net/forwarding/ipip_lib.sh \
+	../../../net/forwarding/tc_common.sh \
+	#
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/hw/csum.py b/tools/testing/selftests/drivers/net/hw/csum.py
new file mode 100755
index 000000000000..cb40497faee4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/csum.py
@@ -0,0 +1,122 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+"""Run the tools/testing/selftests/net/csum testsuite."""
+
+from os import path
+
+from lib.py import ksft_run, ksft_exit, KsftSkipEx
+from lib.py import EthtoolFamily, NetDrvEpEnv
+from lib.py import bkg, cmd, wait_port_listen
+
+def test_receive(cfg, ipv4=False, extra_args=None):
+    """Test local nic checksum receive. Remote host sends crafted packets."""
+    if not cfg.have_rx_csum:
+        raise KsftSkipEx(f"Test requires rx checksum offload on {cfg.ifname}")
+
+    if ipv4:
+        ip_args = f"-4 -S {cfg.remote_v4} -D {cfg.v4}"
+    else:
+        ip_args = f"-6 -S {cfg.remote_v6} -D {cfg.v6}"
+
+    rx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -n 100 {ip_args} -r 1 -R {extra_args}"
+    tx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -n 100 {ip_args} -r 1 -T {extra_args}"
+
+    with bkg(rx_cmd, exit_wait=True):
+        wait_port_listen(34000, proto="udp")
+        cmd(tx_cmd, host=cfg.remote)
+
+
+def test_transmit(cfg, ipv4=False, extra_args=None):
+    """Test local nic checksum transmit. Remote host verifies packets."""
+    if (not cfg.have_tx_csum_generic and
+        not (cfg.have_tx_csum_ipv4 and ipv4) and
+        not (cfg.have_tx_csum_ipv6 and not ipv4)):
+        raise KsftSkipEx(f"Test requires tx checksum offload on {cfg.ifname}")
+
+    if ipv4:
+        ip_args = f"-4 -S {cfg.v4} -D {cfg.remote_v4}"
+    else:
+        ip_args = f"-6 -S {cfg.v6} -D {cfg.remote_v6}"
+
+    # Cannot randomize input when calculating zero checksum
+    if extra_args != "-U -Z":
+        extra_args += " -r 1"
+
+    rx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -L 1 -n 100 {ip_args} -R {extra_args}"
+    tx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -L 1 -n 100 {ip_args} -T {extra_args}"
+
+    with bkg(rx_cmd, host=cfg.remote, exit_wait=True):
+        wait_port_listen(34000, proto="udp", host=cfg.remote)
+        cmd(tx_cmd)
+
+
+def test_builder(name, cfg, ipv4=False, tx=False, extra_args=""):
+    """Construct specific tests from the common template.
+
+       Most tests follow the same basic pattern, differing only in
+       Direction of the test and optional flags passed to csum."""
+    def f(cfg):
+        if ipv4:
+            cfg.require_v4()
+        else:
+            cfg.require_v6()
+
+        if tx:
+            test_transmit(cfg, ipv4, extra_args)
+        else:
+            test_receive(cfg, ipv4, extra_args)
+
+    if ipv4:
+        f.__name__ = "ipv4_" + name
+    else:
+        f.__name__ = "ipv6_" + name
+    return f
+
+
+def check_nic_features(cfg) -> None:
+    """Test whether Tx and Rx checksum offload are enabled.
+
+       If the device under test has either off, then skip the relevant tests."""
+    cfg.have_tx_csum_generic = False
+    cfg.have_tx_csum_ipv4 = False
+    cfg.have_tx_csum_ipv6 = False
+    cfg.have_rx_csum = False
+
+    ethnl = EthtoolFamily()
+    features = ethnl.features_get({"header": {"dev-index": cfg.ifindex}})
+    for f in features["active"]["bits"]["bit"]:
+        if f["name"] == "tx-checksum-ip-generic":
+            cfg.have_tx_csum_generic = True
+        elif f["name"] == "tx-checksum-ipv4":
+            cfg.have_tx_csum_ipv4 = True
+        elif f["name"] == "tx-checksum-ipv6":
+            cfg.have_tx_csum_ipv6 = True
+        elif f["name"] == "rx-checksum":
+            cfg.have_rx_csum = True
+
+
+def main() -> None:
+    with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
+        check_nic_features(cfg)
+
+        cfg.bin_local = path.abspath(path.dirname(__file__) + "/../../../net/lib/csum")
+        cfg.bin_remote = cfg.remote.deploy(cfg.bin_local)
+
+        cases = []
+        for ipv4 in [True, False]:
+            cases.append(test_builder("rx_tcp", cfg, ipv4, False, "-t"))
+            cases.append(test_builder("rx_tcp_invalid", cfg, ipv4, False, "-t -E"))
+
+            cases.append(test_builder("rx_udp", cfg, ipv4, False, ""))
+            cases.append(test_builder("rx_udp_invalid", cfg, ipv4, False, "-E"))
+
+            cases.append(test_builder("tx_udp_csum_offload", cfg, ipv4, True, "-U"))
+            cases.append(test_builder("tx_udp_zero_checksum", cfg, ipv4, True, "-U -Z"))
+
+        ksft_run(cases=cases, args=(cfg, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/net/devlink_port_split.py b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py
index 2d84c7a0be6b..2d84c7a0be6b 100755
--- a/tools/testing/selftests/net/devlink_port_split.py
+++ b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py
diff --git a/tools/testing/selftests/net/forwarding/ethtool.sh b/tools/testing/selftests/drivers/net/hw/ethtool.sh
index aa2eafb7b243..fa6953de6b6d 100755
--- a/tools/testing/selftests/net/forwarding/ethtool.sh
+++ b/tools/testing/selftests/drivers/net/hw/ethtool.sh
@@ -10,7 +10,8 @@ ALL_TESTS="
 	different_speeds_autoneg_on
 "
 NUM_NETIFS=2
-source lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
 source ethtool_lib.sh
 
 h1_create()
@@ -64,9 +65,8 @@ same_speeds_autoneg_off()
 		setup_wait_dev_with_timeout $h1
 		setup_wait_dev_with_timeout $h2
 		ping_do $h1 192.0.2.2
-		check_err $? "speed $speed autoneg off"
-		log_test "force of same speed autoneg off"
-		log_info "speed = $speed"
+		check_err $? "ping with speed $speed autoneg off"
+		log_test "force speed $speed on both ends"
 	done
 
 	ethtool -s $h2 autoneg on
@@ -111,9 +111,8 @@ combination_of_neg_on_and_off()
 		setup_wait_dev_with_timeout $h1
 		setup_wait_dev_with_timeout $h2
 		ping_do $h1 192.0.2.2
-		check_err $? "h1-speed=$speed autoneg off, h2 autoneg on"
-		log_test "one side with autoneg off and another with autoneg on"
-		log_info "force speed = $speed"
+		check_err $? "ping with h1-speed=$speed autoneg off, h2 autoneg on"
+		log_test "force speed $speed vs. autoneg"
 	done
 
 	ethtool -s $h1 autoneg on
@@ -206,10 +205,9 @@ advertise_subset_of_speeds()
 		setup_wait_dev_with_timeout $h1
 		setup_wait_dev_with_timeout $h2
 		ping_do $h1 192.0.2.2
-		check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
+		check_err $? "ping with h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
 
-		log_test "advertise subset of speeds"
-		log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise"
+		log_test "advertise $speed_1_to_advertise vs. $speed_2_to_advertise"
 	done
 
 	ethtool -s $h2 autoneg on
@@ -286,8 +284,6 @@ different_speeds_autoneg_on()
 	ethtool -s $h1 autoneg on
 }
 
-skip_on_veth
-
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh
index 17f89c3b7c02..a7584448416e 100755
--- a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh
@@ -8,7 +8,8 @@ ALL_TESTS="
 "
 
 NUM_NETIFS=2
-source lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
 source ethtool_lib.sh
 
 TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms
@@ -108,8 +109,6 @@ no_cable()
 	ip link set dev $swp3 down
 }
 
-skip_on_veth
-
 setup_prepare
 
 tests_run
diff --git a/tools/testing/selftests/net/forwarding/ethtool_lib.sh b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh
index b9bfb45085af..b9bfb45085af 100644
--- a/tools/testing/selftests/net/forwarding/ethtool_lib.sh
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh
diff --git a/tools/testing/selftests/net/forwarding/ethtool_mm.sh b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh
index 50d5bfb17ef1..c301e735c8ab 100755
--- a/tools/testing/selftests/net/forwarding/ethtool_mm.sh
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh
@@ -14,7 +14,8 @@ ALL_TESTS="
 NUM_NETIFS=2
 REQUIRE_MZ=no
 PREEMPTIBLE_PRIO=0
-source lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
 
 traffic_test()
 {
diff --git a/tools/testing/selftests/net/forwarding/ethtool_rmon.sh b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
index 41a34a61f763..8f60c1685ad4 100755
--- a/tools/testing/selftests/net/forwarding/ethtool_rmon.sh
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
@@ -7,7 +7,8 @@ ALL_TESTS="
 "
 
 NUM_NETIFS=2
-source lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
 
 ETH_FCS_LEN=4
 ETH_HLEN=$((6+6+2))
@@ -43,6 +44,7 @@ bucket_test()
 	# Mausezahn does not include FCS bytes in its length - but the
 	# histogram counters do
 	len=$((len - ETH_FCS_LEN))
+	len=$((len > 0 ? len : 0))
 
 	before=$(ethtool --json -S $iface --groups rmon | \
 		jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val")
@@ -78,7 +80,7 @@ rmon_histogram()
 
 		for if in $iface $neigh; do
 			if ! ensure_mtu $if ${bucket[0]}; then
-				log_test_skip "$if does not support the required MTU for $step"
+				log_test_xfail "$if does not support the required MTU for $step"
 				return
 			fi
 		done
@@ -93,7 +95,7 @@ rmon_histogram()
 		jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null)
 
 	if [ $nbuckets -eq 0 ]; then
-		log_test_skip "$iface does not support $set histogram counters"
+		log_test_xfail "$iface does not support $set histogram counters"
 		return
 	fi
 }
diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh
index 48584a51388f..67fafefc80be 100755
--- a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
+++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh
@@ -48,7 +48,9 @@ ALL_TESTS="
 	test_double_enable
 "
 NUM_NETIFS=4
-source lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+source "$lib_dir"/../../../net/forwarding/tc_common.sh
 
 h1_create()
 {
@@ -324,17 +326,9 @@ setup_wait
 
 used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info |
 	   jq '.[].info.l3_stats.used')
-kind=$(ip -j -d link show dev $rp1 |
-	   jq -r '.[].linkinfo.info_kind')
-if [[ $used != true ]]; then
-	if [[ $kind == veth ]]; then
-		log_test_skip "l3_stats not offloaded on veth interface"
-		EXIT_STATUS=$ksft_skip
-	else
-		RET=1 log_test "l3_stats not offloaded"
-	fi
-else
-	tests_run
-fi
+[[ $used = true ]]
+check_err $? "hw_stats_info.used=$used"
+log_test "l3_stats offloaded"
+tests_run
 
 exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh
index 7594bbb49029..a94d92e1abce 100755
--- a/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh
+++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh
@@ -12,8 +12,10 @@ ALL_TESTS="
 	test_stats_tx
 "
 NUM_NETIFS=6
-source lib.sh
-source ipip_lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+source "$lib_dir"/../../../net/forwarding/ipip_lib.sh
+source "$lib_dir"/../../../net/forwarding/tc_common.sh
 
 setup_prepare()
 {
@@ -99,8 +101,6 @@ test_stats_rx()
 	test_stats g2a rx
 }
 
-skip_on_veth
-
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py
new file mode 100644
index 000000000000..b582885786f5
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import sys
+from pathlib import Path
+
+KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve()
+
+try:
+    sys.path.append(KSFT_DIR.as_posix())
+    from net.lib.py import *
+    from drivers.net.lib.py import *
+except ModuleNotFoundError as e:
+    ksft_pr("Failed importing `net` library from kernel sources")
+    ksft_pr(str(e))
+    ktap_result(True, comment="SKIP")
+    sys.exit(4)
diff --git a/tools/testing/selftests/net/forwarding/loopback.sh b/tools/testing/selftests/drivers/net/hw/loopback.sh
index 8f4057310b5b..5acc3ff820aa 100755
--- a/tools/testing/selftests/net/forwarding/loopback.sh
+++ b/tools/testing/selftests/drivers/net/hw/loopback.sh
@@ -6,8 +6,9 @@ ksft_skip=4
 
 ALL_TESTS="loopback_test"
 NUM_NETIFS=2
-source tc_common.sh
-source lib.sh
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/tc_common.sh
+source "$lib_dir"/../../../net/forwarding/lib.sh
 
 h1_create()
 {
diff --git a/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
new file mode 100755
index 000000000000..026d98976c35
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
@@ -0,0 +1,129 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+import time
+import os
+from lib.py import ksft_run, ksft_exit, ksft_pr
+from lib.py import KsftSkipEx, KsftFailEx
+from lib.py import NetdevFamily, NlError
+from lib.py import NetDrvEpEnv
+from lib.py import cmd, tool, GenerateTraffic
+
+
+def _write_fail_config(config):
+    for key, value in config.items():
+        with open("/sys/kernel/debug/fail_function/" + key, "w") as fp:
+            fp.write(str(value) + "\n")
+
+
+def _enable_pp_allocation_fail():
+    if not os.path.exists("/sys/kernel/debug/fail_function"):
+        raise KsftSkipEx("Kernel built without function error injection (or DebugFS)")
+
+    if not os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"):
+        with open("/sys/kernel/debug/fail_function/inject", "w") as fp:
+            fp.write("page_pool_alloc_pages\n")
+
+    _write_fail_config({
+        "verbose": 0,
+        "interval": 511,
+        "probability": 100,
+        "times": -1,
+    })
+
+
+def _disable_pp_allocation_fail():
+    if not os.path.exists("/sys/kernel/debug/fail_function"):
+        return
+
+    if os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"):
+        with open("/sys/kernel/debug/fail_function/inject", "w") as fp:
+            fp.write("\n")
+
+    _write_fail_config({
+        "probability": 0,
+        "times": 0,
+    })
+
+
+def test_pp_alloc(cfg, netdevnl):
+    def get_stats():
+        return netdevnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0]
+
+    def check_traffic_flowing():
+        stat1 = get_stats()
+        time.sleep(1)
+        stat2 = get_stats()
+        if stat2['rx-packets'] - stat1['rx-packets'] < 15000:
+            raise KsftFailEx("Traffic seems low:", stat2['rx-packets'] - stat1['rx-packets'])
+
+
+    try:
+        stats = get_stats()
+    except NlError as e:
+        if e.nl_msg.error == -95:
+            stats = {}
+        else:
+            raise
+    if 'rx-alloc-fail' not in stats:
+        raise KsftSkipEx("Driver does not report 'rx-alloc-fail' via qstats")
+
+    set_g = False
+    traffic = None
+    try:
+        traffic = GenerateTraffic(cfg)
+
+        check_traffic_flowing()
+
+        _enable_pp_allocation_fail()
+
+        s1 = get_stats()
+        time.sleep(3)
+        s2 = get_stats()
+
+        if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 1:
+            raise KsftSkipEx("Allocation failures not increasing")
+        if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 100:
+            raise KsftSkipEx("Allocation increasing too slowly", s2['rx-alloc-fail'] - s1['rx-alloc-fail'],
+                             "packets:", s2['rx-packets'] - s1['rx-packets'])
+
+        # Basic failures are fine, try to wobble some settings to catch extra failures
+        check_traffic_flowing()
+        g = tool("ethtool", "-g " + cfg.ifname, json=True)[0]
+        if 'rx' in g and g["rx"] * 2 <= g["rx-max"]:
+            new_g = g['rx'] * 2
+        elif 'rx' in g:
+            new_g = g['rx'] // 2
+        else:
+            new_g = None
+
+        if new_g:
+            set_g = cmd(f"ethtool -G {cfg.ifname} rx {new_g}", fail=False).ret == 0
+            if set_g:
+                ksft_pr("ethtool -G change retval: success")
+            else:
+                ksft_pr("ethtool -G change retval: did not succeed", new_g)
+        else:
+                ksft_pr("ethtool -G change retval: did not try")
+
+        time.sleep(0.1)
+        check_traffic_flowing()
+    finally:
+        _disable_pp_allocation_fail()
+        if traffic:
+            traffic.stop()
+        time.sleep(0.1)
+        if set_g:
+            cmd(f"ethtool -G {cfg.ifname} rx {g['rx']}")
+
+
+def main() -> None:
+    netdevnl = NetdevFamily()
+    with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
+
+        ksft_run([test_pp_alloc], args=(cfg, netdevnl, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/drivers/net/hw/settings b/tools/testing/selftests/drivers/net/hw/settings
new file mode 100644
index 000000000000..e7b9417537fb
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py
new file mode 100644
index 000000000000..401e70f7f136
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import sys
+from pathlib import Path
+
+KSFT_DIR = (Path(__file__).parent / "../../../..").resolve()
+
+try:
+    sys.path.append(KSFT_DIR.as_posix())
+    from net.lib.py import *
+except ModuleNotFoundError as e:
+    ksft_pr("Failed importing `net` library from kernel sources")
+    ksft_pr(str(e))
+    ktap_result(True, comment="SKIP")
+    sys.exit(4)
+
+from .env import *
+from .load import *
+from .remote import Remote
diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py
new file mode 100644
index 000000000000..edcedd7bffab
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/py/env.py
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import os
+from pathlib import Path
+from lib.py import KsftSkipEx, KsftXfailEx
+from lib.py import cmd, ip
+from lib.py import NetNS, NetdevSimDev
+from .remote import Remote
+
+
+def _load_env_file(src_path):
+    env = os.environ.copy()
+
+    src_dir = Path(src_path).parent.resolve()
+    if not (src_dir / "net.config").exists():
+        return env
+
+    with open((src_dir / "net.config").as_posix(), 'r') as fp:
+        for line in fp.readlines():
+            full_file = line
+            # Strip comments
+            pos = line.find("#")
+            if pos >= 0:
+                line = line[:pos]
+            line = line.strip()
+            if not line:
+                continue
+            pair = line.split('=', maxsplit=1)
+            if len(pair) != 2:
+                raise Exception("Can't parse configuration line:", full_file)
+            env[pair[0]] = pair[1]
+    return env
+
+
+class NetDrvEnv:
+    """
+    Class for a single NIC / host env, with no remote end
+    """
+    def __init__(self, src_path, **kwargs):
+        self._ns = None
+
+        self.env = _load_env_file(src_path)
+
+        if 'NETIF' in self.env:
+            self.dev = ip("link show dev " + self.env['NETIF'], json=True)[0]
+        else:
+            self._ns = NetdevSimDev(**kwargs)
+            self.dev = self._ns.nsims[0].dev
+        self.ifindex = self.dev['ifindex']
+
+    def __enter__(self):
+        ip(f"link set dev {self.dev['ifname']} up")
+
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        """
+        __exit__ gets called at the end of a "with" block.
+        """
+        self.__del__()
+
+    def __del__(self):
+        if self._ns:
+            self._ns.remove()
+            self._ns = None
+
+
+class NetDrvEpEnv:
+    """
+    Class for an environment with a local device and "remote endpoint"
+    which can be used to send traffic in.
+
+    For local testing it creates two network namespaces and a pair
+    of netdevsim devices.
+    """
+
+    # Network prefixes used for local tests
+    nsim_v4_pfx = "192.0.2."
+    nsim_v6_pfx = "2001:db8::"
+
+    def __init__(self, src_path, nsim_test=None):
+
+        self.env = _load_env_file(src_path)
+
+        # Things we try to destroy
+        self.remote = None
+        # These are for local testing state
+        self._netns = None
+        self._ns = None
+        self._ns_peer = None
+
+        if "NETIF" in self.env:
+            if nsim_test is True:
+                raise KsftXfailEx("Test only works on netdevsim")
+            self._check_env()
+
+            self.dev = ip("link show dev " + self.env['NETIF'], json=True)[0]
+
+            self.v4 = self.env.get("LOCAL_V4")
+            self.v6 = self.env.get("LOCAL_V6")
+            self.remote_v4 = self.env.get("REMOTE_V4")
+            self.remote_v6 = self.env.get("REMOTE_V6")
+            kind = self.env["REMOTE_TYPE"]
+            args = self.env["REMOTE_ARGS"]
+        else:
+            if nsim_test is False:
+                raise KsftXfailEx("Test does not work on netdevsim")
+
+            self.create_local()
+
+            self.dev = self._ns.nsims[0].dev
+
+            self.v4 = self.nsim_v4_pfx + "1"
+            self.v6 = self.nsim_v6_pfx + "1"
+            self.remote_v4 = self.nsim_v4_pfx + "2"
+            self.remote_v6 = self.nsim_v6_pfx + "2"
+            kind = "netns"
+            args = self._netns.name
+
+        self.remote = Remote(kind, args, src_path)
+
+        self.addr = self.v6 if self.v6 else self.v4
+        self.remote_addr = self.remote_v6 if self.remote_v6 else self.remote_v4
+
+        self.addr_ipver = "6" if self.v6 else "4"
+        # Bracketed addresses, some commands need IPv6 to be inside []
+        self.baddr = f"[{self.v6}]" if self.v6 else self.v4
+        self.remote_baddr = f"[{self.remote_v6}]" if self.remote_v6 else self.remote_v4
+
+        self.ifname = self.dev['ifname']
+        self.ifindex = self.dev['ifindex']
+
+        self._required_cmd = {}
+
+    def create_local(self):
+        self._netns = NetNS()
+        self._ns = NetdevSimDev()
+        self._ns_peer = NetdevSimDev(ns=self._netns)
+
+        with open("/proc/self/ns/net") as nsfd0, \
+             open("/var/run/netns/" + self._netns.name) as nsfd1:
+            ifi0 = self._ns.nsims[0].ifindex
+            ifi1 = self._ns_peer.nsims[0].ifindex
+            NetdevSimDev.ctrl_write('link_device',
+                                    f'{nsfd0.fileno()}:{ifi0} {nsfd1.fileno()}:{ifi1}')
+
+        ip(f"   addr add dev {self._ns.nsims[0].ifname} {self.nsim_v4_pfx}1/24")
+        ip(f"-6 addr add dev {self._ns.nsims[0].ifname} {self.nsim_v6_pfx}1/64 nodad")
+        ip(f"   link set dev {self._ns.nsims[0].ifname} up")
+
+        ip(f"   addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v4_pfx}2/24", ns=self._netns)
+        ip(f"-6 addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v6_pfx}2/64 nodad", ns=self._netns)
+        ip(f"   link set dev {self._ns_peer.nsims[0].ifname} up", ns=self._netns)
+
+    def _check_env(self):
+        vars_needed = [
+            ["LOCAL_V4", "LOCAL_V6"],
+            ["REMOTE_V4", "REMOTE_V6"],
+            ["REMOTE_TYPE"],
+            ["REMOTE_ARGS"]
+        ]
+        missing = []
+
+        for choice in vars_needed:
+            for entry in choice:
+                if entry in self.env:
+                    break
+            else:
+                missing.append(choice)
+        # Make sure v4 / v6 configs are symmetric
+        if ("LOCAL_V6" in self.env) != ("REMOTE_V6" in self.env):
+            missing.append(["LOCAL_V6", "REMOTE_V6"])
+        if ("LOCAL_V4" in self.env) != ("REMOTE_V4" in self.env):
+            missing.append(["LOCAL_V4", "REMOTE_V4"])
+        if missing:
+            raise Exception("Invalid environment, missing configuration:", missing,
+                            "Please see tools/testing/selftests/drivers/net/README.rst")
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        """
+        __exit__ gets called at the end of a "with" block.
+        """
+        self.__del__()
+
+    def __del__(self):
+        if self._ns:
+            self._ns.remove()
+            self._ns = None
+        if self._ns_peer:
+            self._ns_peer.remove()
+            self._ns_peer = None
+        if self._netns:
+            del self._netns
+            self._netns = None
+        if self.remote:
+            del self.remote
+            self.remote = None
+
+    def require_v4(self):
+        if not self.v4 or not self.remote_v4:
+            raise KsftSkipEx("Test requires IPv4 connectivity")
+
+    def require_v6(self):
+        if not self.v6 or not self.remote_v6:
+            raise KsftSkipEx("Test requires IPv6 connectivity")
+
+    def _require_cmd(self, comm, key, host=None):
+        cached = self._required_cmd.get(comm, {})
+        if cached.get(key) is None:
+            cached[key] = cmd("command -v -- " + comm, fail=False,
+                              shell=True, host=host).ret == 0
+        self._required_cmd[comm] = cached
+        return cached[key]
+
+    def require_cmd(self, comm, local=True, remote=False):
+        if local:
+            if not self._require_cmd(comm, "local"):
+                raise KsftSkipEx("Test requires command: " + comm)
+        if remote:
+            if not self._require_cmd(comm, "remote"):
+                raise KsftSkipEx("Test requires (remote) command: " + comm)
diff --git a/tools/testing/selftests/drivers/net/lib/py/load.py b/tools/testing/selftests/drivers/net/lib/py/load.py
new file mode 100644
index 000000000000..abdb677bdb1c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/py/load.py
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import time
+
+from lib.py import ksft_pr, cmd, ip, rand_port, wait_port_listen
+
+class GenerateTraffic:
+    def __init__(self, env):
+        env.require_cmd("iperf3", remote=True)
+
+        self.env = env
+
+        port = rand_port()
+        self._iperf_server = cmd(f"iperf3 -s -p {port}", background=True)
+        wait_port_listen(port)
+        time.sleep(0.1)
+        self._iperf_client = cmd(f"iperf3 -c {env.addr} -P 16 -p {port} -t 86400",
+                                 background=True, host=env.remote)
+
+        # Wait for traffic to ramp up
+        pkt = ip("-s link show dev " + env.ifname, json=True)[0]["stats64"]["rx"]["packets"]
+        for _ in range(50):
+            time.sleep(0.1)
+            now = ip("-s link show dev " + env.ifname, json=True)[0]["stats64"]["rx"]["packets"]
+            if now - pkt > 1000:
+                return
+            pkt = now
+        self.stop(verbose=True)
+        raise Exception("iperf3 traffic did not ramp up")
+
+    def stop(self, verbose=None):
+        self._iperf_client.process(terminate=True)
+        if verbose:
+            ksft_pr(">> Client:")
+            ksft_pr(self._iperf_client.stdout)
+            ksft_pr(self._iperf_client.stderr)
+        self._iperf_server.process(terminate=True)
+        if verbose:
+            ksft_pr(">> Server:")
+            ksft_pr(self._iperf_server.stdout)
+            ksft_pr(self._iperf_server.stderr)
diff --git a/tools/testing/selftests/drivers/net/lib/py/remote.py b/tools/testing/selftests/drivers/net/lib/py/remote.py
new file mode 100644
index 000000000000..b1780b987722
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/py/remote.py
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import os
+import importlib
+
+_modules = {}
+
+def Remote(kind, args, src_path):
+    global _modules
+
+    if kind not in _modules:
+        _modules[kind] = importlib.import_module("..remote_" + kind, __name__)
+
+    dir_path = os.path.abspath(src_path + "/../")
+    return getattr(_modules[kind], "Remote")(args, dir_path)
diff --git a/tools/testing/selftests/drivers/net/lib/py/remote_netns.py b/tools/testing/selftests/drivers/net/lib/py/remote_netns.py
new file mode 100644
index 000000000000..7d5eeb0271bc
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/py/remote_netns.py
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import os
+import subprocess
+
+from lib.py import cmd
+
+
+class Remote:
+    def __init__(self, name, dir_path):
+        self.name = name
+        self.dir_path = dir_path
+
+    def cmd(self, comm):
+        return subprocess.Popen(["ip", "netns", "exec", self.name, "bash", "-c", comm],
+                                 stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+
+    def deploy(self, what):
+        if os.path.isabs(what):
+            return what
+        return os.path.abspath(self.dir_path + "/" + what)
diff --git a/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py b/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py
new file mode 100644
index 000000000000..924addde19a3
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import os
+import string
+import subprocess
+import random
+
+from lib.py import cmd
+
+
+class Remote:
+    def __init__(self, name, dir_path):
+        self.name = name
+        self.dir_path = dir_path
+        self._tmpdir = None
+
+    def __del__(self):
+        if self._tmpdir:
+            cmd("rm -rf " + self._tmpdir, host=self)
+            self._tmpdir = None
+
+    def cmd(self, comm):
+        return subprocess.Popen(["ssh", "-q", self.name, comm],
+                                stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+
+    def _mktmp(self):
+        return ''.join(random.choice(string.ascii_lowercase) for _ in range(8))
+
+    def deploy(self, what):
+        if not self._tmpdir:
+            self._tmpdir = "/tmp/" + self._mktmp()
+            cmd("mkdir " + self._tmpdir, host=self)
+        file_name = self._tmpdir + "/" + self._mktmp() + os.path.basename(what)
+
+        if not os.path.isabs(what):
+            what = os.path.abspath(self.dir_path + "/" + what)
+
+        cmd(f"scp {what} {self.name}:{file_name}")
+        return file_name
diff --git a/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh b/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh
new file mode 100755
index 000000000000..82be5d013330
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh
@@ -0,0 +1,668 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+# The script is adopted to work with the Microchip KSZ switch driver.
+
+ETH_FCS_LEN=4
+
+WAIT_TIME=1
+NUM_NETIFS=4
+REQUIRE_JQ="yes"
+REQUIRE_MZ="yes"
+STABLE_MAC_ADDRS=yes
+NETIF_CREATE=no
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+require_command dcb
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+# On h1_ and h2_create do not set IP addresses to avoid interaction with the
+# system, to keep packet counters clean.
+h1_create()
+{
+	simple_if_init $h1
+	sysctl_set net.ipv6.conf.${h1}.disable_ipv6 1
+	# Get the MAC address of the interface to use it with mausezahn
+	h1_mac=$(ip -j link show dev ${h1} | jq -e '.[].address')
+}
+
+h1_destroy()
+{
+	sysctl_restore net.ipv6.conf.${h1}.disable_ipv6
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	sysctl_set net.ipv6.conf.${h2}.disable_ipv6 1
+	h2_mac=$(ip -j link show dev ${h2} | jq -e '.[].address')
+}
+
+h2_destroy()
+{
+	sysctl_restore net.ipv6.conf.${h2}.disable_ipv6
+	simple_if_fini $h2
+}
+
+switch_create()
+{
+	ip link set ${swp1} up
+	ip link set ${swp2} up
+	sysctl_set net.ipv6.conf.${swp1}.disable_ipv6 1
+	sysctl_set net.ipv6.conf.${swp2}.disable_ipv6 1
+
+	# Ports should trust VLAN PCP even with vlan_filtering=0
+	ip link add br0 type bridge
+	ip link set ${swp1} master br0
+	ip link set ${swp2} master br0
+	ip link set br0 up
+	sysctl_set net.ipv6.conf.br0.disable_ipv6 1
+}
+
+switch_destroy()
+{
+	sysctl_restore net.ipv6.conf.${swp2}.disable_ipv6
+	sysctl_restore net.ipv6.conf.${swp1}.disable_ipv6
+
+	ip link del br0
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+	switch_destroy
+
+	vrf_cleanup
+}
+
+set_apptrust_order()
+{
+	local if_name=$1
+	local order=$2
+
+	dcb apptrust set dev ${if_name} order ${order}
+}
+
+# Function to extract a specified field from a given JSON stats string
+extract_network_stat() {
+	local stats_json=$1
+	local field_name=$2
+
+	echo $(echo "$stats_json" | jq -r "$field_name")
+}
+
+run_test()
+{
+	local test_name=$1;
+	local apptrust_order=$2;
+	local port_prio=$3;
+	local dscp_ipv=$4;
+	local dscp=$5;
+	local have_vlan=$6;
+	local pcp_ipv=$7;
+	local vlan_pcp=$8;
+	local ip_v6=$9
+
+	local rx_ipv
+	local tx_ipv
+
+	RET=0
+
+	# Send some packet to populate the switch MAC table
+	$MZ ${h2} -a ${h2_mac} -b ${h1_mac} -p 64 -t icmp echores -c 1
+
+	# Based on the apptrust order, set the expected Internal Priority values
+	# for the RX and TX paths.
+	if [ "${apptrust_order}" == "" ]; then
+		echo "Apptrust order not set."
+		rx_ipv=${port_prio}
+		tx_ipv=${port_prio}
+	elif [ "${apptrust_order}" == "dscp" ]; then
+		echo "Apptrust order is DSCP."
+		rx_ipv=${dscp_ipv}
+		tx_ipv=${dscp_ipv}
+	elif [ "${apptrust_order}" == "pcp" ]; then
+		echo "Apptrust order is PCP."
+		rx_ipv=${pcp_ipv}
+		tx_ipv=${pcp_ipv}
+	elif [ "${apptrust_order}" == "pcp dscp" ]; then
+		echo "Apptrust order is PCP DSCP."
+		if [ ${have_vlan} -eq 1 ]; then
+			rx_ipv=$((dscp_ipv > pcp_ipv ? dscp_ipv : pcp_ipv))
+			tx_ipv=${pcp_ipv}
+		else
+			rx_ipv=${dscp_ipv}
+			tx_ipv=${dscp_ipv}
+		fi
+	else
+		RET=1
+		echo "Error: Unknown apptrust order ${apptrust_order}"
+		log_test "${test_name}"
+		return
+	fi
+
+	# Most/all? of the KSZ switches do not provide per-TC counters. There
+	# are only tx_hi and rx_hi counters, which are used to count packets
+	# which are considered as high priority and most likely not assigned
+	# to the queue 0.
+	# On the ingress path, packets seem to get high priority status
+	# independently of the DSCP or PCP global mapping. On the egress path,
+	# the high priority status is assigned based on the DSCP or PCP global
+	# map configuration.
+	# The thresholds for the high priority status are not documented, but
+	# it seems that the switch considers packets as high priority on the
+	# ingress path if detected Internal Priority is greater than 0. On the
+	# egress path, the switch considers packets as high priority if
+	# detected Internal Priority is greater than 1.
+	if [ ${rx_ipv} -ge 1 ]; then
+		local expect_rx_high_prio=1
+	else
+		local expect_rx_high_prio=0
+	fi
+
+	if [ ${tx_ipv} -ge 2 ]; then
+		local expect_tx_high_prio=1
+	else
+		local expect_tx_high_prio=0
+	fi
+
+	# Use ip tool to get the current switch packet counters. ethool stats
+	# need to be recalculated to get the correct values.
+	local swp1_stats=$(ip -s -j link show dev ${swp1})
+	local swp2_stats=$(ip -s -j link show dev ${swp2})
+	local swp1_rx_packets_before=$(extract_network_stat "$swp1_stats" \
+				       '.[0].stats64.rx.packets')
+	local swp1_rx_bytes_before=$(extract_network_stat "$swp1_stats" \
+				     '.[0].stats64.rx.bytes')
+	local swp2_tx_packets_before=$(extract_network_stat "$swp2_stats" \
+				       '.[0].stats64.tx.packets')
+	local swp2_tx_bytes_before=$(extract_network_stat "$swp2_stats" \
+				     '.[0].stats64.tx.bytes')
+	local swp1_rx_hi_before=$(ethtool_stats_get ${swp1} "rx_hi")
+	local swp2_tx_hi_before=$(ethtool_stats_get ${swp2} "tx_hi")
+
+	# Assamble the mausezahn command based on the test parameters
+	# For the testis with ipv4 or ipv6, use icmp response packets,
+	# to avoid interaction with the system, to keep packet counters
+	# clean.
+	if [ ${ip_v6} -eq 0 ]; then
+		local ip="-a ${h1_mac} -b ${h2_mac} -A ${H1_IPV4} \
+			  -B ${H2_IPV4} -t icmp unreach,code=1,dscp=${dscp}"
+	else
+		local ip="-6 -a ${h1_mac} -b ${h2_mac} -A ${H1_IPV6} \
+			  -B ${H2_IPV6} -t icmp6 type=1,code=0,dscp=${dscp}"
+	fi
+
+	if [ ${have_vlan} -eq 1 ]; then
+		local vlan_pcp_opt="-Q ${vlan_pcp}:0"
+	else
+		local vlan_pcp_opt=""
+	fi
+	$MZ ${h1} ${ip} -c ${PING_COUNT} -d 10msec ${vlan_pcp_opt}
+
+	# Wait until the switch packet counters are updated
+	sleep 6
+
+	local swp1_stats=$(ip -s -j link show dev ${swp1})
+	local swp2_stats=$(ip -s -j link show dev ${swp2})
+
+	local swp1_rx_packets_after=$(extract_network_stat "$swp1_stats" \
+				      '.[0].stats64.rx.packets')
+	local swp1_rx_bytes_after=$(extract_network_stat "$swp1_stats" \
+				    '.[0].stats64.rx.bytes')
+	local swp2_tx_packets_after=$(extract_network_stat "$swp2_stats" \
+				      '.[0].stats64.tx.packets')
+	local swp2_tx_bytes_after=$(extract_network_stat "$swp2_stats" \
+				    '.[0].stats64.tx.bytes')
+
+	local swp1_rx_packets_diff=$((${swp1_rx_packets_after} - \
+				      ${swp1_rx_packets_before}))
+	local swp2_tx_packets_diff=$((${swp2_tx_packets_after} - \
+				      ${swp2_tx_packets_before}))
+
+	local swp1_rx_hi_after=$(ethtool_stats_get ${swp1} "rx_hi")
+	local swp2_tx_hi_after=$(ethtool_stats_get ${swp2} "tx_hi")
+
+	# Test if any packets were received on swp1, we will rx before and after
+	if [ ${swp1_rx_packets_diff} -lt ${PING_COUNT} ]; then
+		echo "Not expected amount of received packets on ${swp1}"
+		echo "before ${swp1_rx_packets_before} after ${swp1_rx_packets_after}"
+		RET=1
+	fi
+
+	# Test if any packets were transmitted on swp2, we will tx before and after
+	if [ ${swp2_tx_packets_diff} -lt ${PING_COUNT} ]; then
+		echo "Not expected amount of transmitted packets on ${swp2}"
+		echo "before ${swp2_tx_packets_before} after ${swp2_tx_packets_after}"
+		RET=1
+	fi
+
+	# tx/rx_hi counted in bytes. So, we need to compare the difference in bytes
+	local swp1_rx_bytes_diff=$(($swp1_rx_bytes_after - $swp1_rx_bytes_before))
+	local swp2_tx_bytes_diff=$(($swp2_tx_bytes_after - $swp2_tx_bytes_before))
+	local swp1_rx_hi_diff=$(($swp1_rx_hi_after - $swp1_rx_hi_before))
+	local swp2_tx_hi_diff=$(($swp2_tx_hi_after - $swp2_tx_hi_before))
+
+	if [ ${expect_rx_high_prio} -eq 1 ]; then
+		swp1_rx_hi_diff=$((${swp1_rx_hi_diff} - \
+				   ${swp1_rx_packets_diff} * ${ETH_FCS_LEN}))
+		if [ ${swp1_rx_hi_diff} -ne ${swp1_rx_bytes_diff} ]; then
+			echo "Not expected amount of high priority packets received on ${swp1}"
+			echo "RX hi diff: ${swp1_rx_hi_diff}, expected RX bytes diff: ${swp1_rx_bytes_diff}"
+			RET=1
+		fi
+	else
+		if [ ${swp1_rx_hi_diff} -ne 0 ]; then
+			echo "Unexpected amount of high priority packets received on ${swp1}"
+			echo "RX hi diff: ${swp1_rx_hi_diff}, expected 0"
+			RET=1
+		fi
+	fi
+
+	if [ ${expect_tx_high_prio} -eq 1 ]; then
+		swp2_tx_hi_diff=$((${swp2_tx_hi_diff} - \
+				   ${swp2_tx_packets_diff} * ${ETH_FCS_LEN}))
+		if [ ${swp2_tx_hi_diff} -ne ${swp2_tx_bytes_diff} ]; then
+			echo "Not expected amount of high priority packets transmitted on ${swp2}"
+			echo "TX hi diff: ${swp2_tx_hi_diff}, expected TX bytes diff: ${swp2_tx_bytes_diff}"
+			RET=1
+		fi
+	else
+		if [ ${swp2_tx_hi_diff} -ne 0 ]; then
+			echo "Unexpected amount of high priority packets transmitted on ${swp2}"
+			echo "TX hi diff: ${swp2_tx_hi_diff}, expected 0"
+			RET=1
+		fi
+	fi
+
+	log_test "${test_name}"
+}
+
+run_test_dscp()
+{
+	# IPv4 test
+	run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 0
+	# IPv6 test
+	run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 1
+}
+
+run_test_dscp_pcp()
+{
+	# IPv4 test
+	run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 0
+	# IPv6 test
+	run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 1
+}
+
+port_default_prio_get()
+{
+	local if_name=$1
+	local prio
+
+	prio="$(dcb -j app show dev ${if_name} default-prio | \
+		jq '.default_prio[]')"
+	if [ -z "${prio}" ]; then
+		prio=0
+	fi
+
+	echo ${prio}
+}
+
+test_port_default()
+{
+	local orig_apptrust=$(port_get_default_apptrust ${swp1})
+	local orig_prio=$(port_default_prio_get ${swp1})
+	local apptrust_order=""
+
+	RET=0
+
+	# Make sure no other priority sources will interfere with the test
+	set_apptrust_order ${swp1} "${apptrust_order}"
+
+	for val in $(seq 0 7); do
+		dcb app replace dev ${swp1} default-prio ${val}
+		if [ $val -ne $(port_default_prio_get ${swp1}) ]; then
+			RET=1
+			break
+		fi
+
+		run_test_dscp "Port-default QoS classification, prio: ${val}" \
+			"${apptrust_order}" ${val} 0 0
+	done
+
+	set_apptrust_order ${swp1} "${orig_apptrust}"
+	if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then
+		RET=1
+	fi
+
+	dcb app replace dev ${swp1} default-prio ${orig_prio}
+	if [ $orig_prio -ne $(port_default_prio_get ${swp1}) ]; then
+		RET=1
+	fi
+
+	log_test "Port-default QoS classification"
+}
+
+port_get_default_apptrust()
+{
+	local if_name=$1
+
+	dcb -j apptrust show dev ${if_name} | jq -r '.order[]' | \
+		tr '\n' ' ' | xargs
+}
+
+test_port_apptrust()
+{
+	local original_dscp_prios_swp1=$(get_dscp_prios ${swp1})
+	local orig_apptrust=$(port_get_default_apptrust ${swp1})
+	local orig_port_prio=$(port_default_prio_get ${swp1})
+	local order_variants=("pcp dscp" "dscp" "pcp")
+	local apptrust_order
+	local port_prio
+	local dscp_prio
+	local pcp_prio
+	local dscp
+	local pcp
+
+	RET=0
+
+	# First, test if apptrust configuration as taken by the kernel
+	for order in "${order_variants[@]}"; do
+		set_apptrust_order ${swp1} "${order}"
+		if [[ "$order" != "$(port_get_default_apptrust ${swp1})" ]]; then
+			RET=1
+			break
+		fi
+	done
+
+	log_test "Apptrust, supported variants"
+
+	# To test if the apptrust configuration is working as expected, we need
+	# to set DSCP priorities for the switch port.
+	init_dscp_prios "${swp1}" "${original_dscp_prios_swp1}"
+
+	# Start with a simple test where all apptrust sources are disabled
+	# default port priority is 0, DSCP priority is mapped to 7.
+	# No high priority packets should be received or transmitted.
+	port_prio=0
+	dscp_prio=7
+	dscp=4
+
+	dcb app replace dev ${swp1} default-prio ${port_prio}
+	dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio}
+
+	apptrust_order=""
+	set_apptrust_order ${swp1} "${apptrust_order}"
+	# Test with apptrust sources disabled, Packets should get port default
+	# priority which is 0
+	run_test_dscp "Apptrust, all disabled. DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+	apptrust_order="pcp"
+	set_apptrust_order ${swp1} "${apptrust_order}"
+	# If PCP is enabled, packets should get PCP priority, which is not
+	# set in this test (no VLAN tags are present in the packet). No high
+	# priority packets should be received or transmitted.
+	run_test_dscp "Apptrust, PCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+	apptrust_order="dscp"
+	set_apptrust_order ${swp1} "${apptrust_order}"
+	# If DSCP is enabled, packets should get DSCP priority which is set to 7
+	# in this test. High priority packets should be received and transmitted.
+	run_test_dscp "Apptrust, DSCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+	apptrust_order="pcp dscp"
+	set_apptrust_order ${swp1} "${apptrust_order}"
+	# If PCP and DSCP are enabled, PCP would have higher apptrust priority
+	# so packets should get PCP priority. But in this test VLAN PCP is not
+	# set, so it should get DSCP priority which is set to 7. High priority
+	# packets should be received and transmitted.
+	run_test_dscp "Apptrust, PCP and DSCP are enabled. DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+	# If VLAN PCP is set, it should have higher apptrust priority than DSCP
+	# so packets should get VLAN PCP priority. Send packets with VLAN PCP
+	# set to 0, DSCP set to 7. Packets should get VLAN PCP priority.
+	# No high priority packets should be transmitted. Due to nature of the
+	# switch, high priority packets will be received.
+	pcp_prio=0
+	pcp=0
+	run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+
+	# If VLAN PCP is set to 7, it should have higher apptrust priority than
+	# DSCP so packets should get VLAN PCP priority. Send packets with VLAN
+	# PCP set to 7, DSCP set to 7. Packets should get VLAN PCP priority.
+	# High priority packets should be received and transmitted.
+	pcp_prio=7
+	pcp=7
+	run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+	# Now make sure that the switch is able to handle the case where DSCP
+	# priority is set to 0 and PCP priority is set to 7. Packets should get
+	# PCP priority. High priority packets should be received and transmitted.
+	dscp_prio=0
+	dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio}
+	run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+	# If both VLAN PCP and DSCP are set to 0, packets should get 0 priority.
+	# No high priority packets should be received or transmitted.
+	pcp_prio=0
+	pcp=0
+	run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+		"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+
+	# Restore original priorities
+	if ! restore_priorities "${swp1}" "${original_dscp_prios_swp1}"; then
+		RET=1
+	fi
+
+	set_apptrust_order ${swp1} "${orig_apptrust}"
+	if [ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]; then
+		RET=1
+	fi
+
+	dcb app replace dev ${swp1} default-prio ${orig_port_prio}
+	if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then
+		RET=1
+	fi
+
+	log_test "Apptrust, restore original settings"
+}
+
+# Function to get current DSCP priorities
+get_dscp_prios() {
+	local if_name=$1
+	dcb -j app show dev ${if_name} | jq -c '.dscp_prio'
+}
+
+# Function to set a specific DSCP priority on a device
+replace_dscp_prio() {
+	local if_name=$1
+	local dscp=$2
+	local prio=$3
+	dcb app replace dev ${if_name} dscp-prio ${dscp}:${prio}
+}
+
+# Function to compare DSCP maps
+compare_dscp_maps() {
+	local old_json=$1
+	local new_json=$2
+	local dscp=$3
+	local prio=$4
+
+	# Create a modified old_json with the expected change for comparison
+	local modified_old_json=$(echo "$old_json" |
+		jq --argjson dscp $dscp --argjson prio $prio \
+			'map(if .[0] == $dscp then [$dscp, $prio] else . end)' |
+		tr -d " \n")
+
+	# Compare new_json with the modified_old_json
+	if [[ "$modified_old_json" == "$new_json" ]]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+# Function to set DSCP priorities
+set_and_verify_dscp() {
+	local port=$1
+	local dscp=$2
+	local new_prio=$3
+
+	local old_prios=$(get_dscp_prios $port)
+
+	replace_dscp_prio "$port" $dscp $new_prio
+
+	# Fetch current settings and compare
+	local current_prios=$(get_dscp_prios $port)
+	if ! compare_dscp_maps "$old_prios" "$current_prios" $dscp $new_prio; then
+		echo "Error: Unintended changes detected in DSCP map for $port after setting DSCP $dscp to $new_prio."
+		return 1
+	fi
+	return 0
+}
+
+# Function to restore original priorities
+restore_priorities() {
+	local port=$1
+	local original_prios=$2
+
+	echo "Removing test artifacts for $port"
+	local current_prios=$(get_dscp_prios $port)
+	local prio_str=$(echo "$current_prios" |
+		jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
+	dcb app del dev $port dscp-prio $prio_str
+
+	echo "Restoring original DSCP priorities for $port"
+	local restore_str=$(echo "$original_prios" |
+		jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
+	dcb app add dev $port dscp-prio $restore_str
+
+	local current_prios=$(get_dscp_prios $port)
+	if [[ "$original_prios" != "$current_prios" ]]; then
+		echo "Error: Failed to restore original DSCP priorities for $port"
+		return 1
+	fi
+	return 0
+}
+
+# Initialize DSCP priorities. Set them to predictable values for testing.
+init_dscp_prios() {
+	local port=$1
+	local original_prios=$2
+
+	echo "Removing any existing DSCP priority mappins for $port"
+	local prio_str=$(echo "$original_prios" |
+		jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
+	dcb app del dev $port dscp-prio $prio_str
+
+	# Initialize DSCP priorities list
+	local dscp_prios=""
+	for dscp in {0..63}; do
+		dscp_prios+=("$dscp:0")
+	done
+
+	echo "Setting initial DSCP priorities map to 0 for $port"
+	dcb app add dev $port dscp-prio ${dscp_prios[@]}
+}
+
+# Main function to test global DSCP map across specified ports
+test_global_dscp_map() {
+	local ports=("$swp1" "$swp2")
+	local original_dscp_prios_port0=$(get_dscp_prios ${ports[0]})
+	local orig_apptrust=$(port_get_default_apptrust ${swp1})
+	local orig_port_prio=$(port_default_prio_get ${swp1})
+	local apptrust_order="dscp"
+	local port_prio=0
+	local dscp_prio
+	local dscp
+
+	RET=0
+
+	set_apptrust_order ${swp1} "${apptrust_order}"
+	dcb app replace dev ${swp1} default-prio ${port_prio}
+
+	# Initialize DSCP priorities
+	init_dscp_prios "${ports[0]}" "$original_dscp_prios_port0"
+
+	# Loop over each DSCP index
+	for dscp in {0..63}; do
+		# and test each Internal Priority value
+		for dscp_prio in {0..7}; do
+			# do it for each port. This is to test if the global DSCP map
+			# is accessible from all ports.
+			for port in "${ports[@]}"; do
+				if ! set_and_verify_dscp "$port" $dscp $dscp_prio; then
+					RET=1
+				fi
+			done
+
+			# Test if the DSCP priority is correctly applied to the packets
+			run_test_dscp "DSCP (${dscp}) QoS classification, prio: ${dscp_prio}" \
+				"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+			if [ ${RET} -eq 1 ]; then
+				break
+			fi
+		done
+	done
+
+	# Restore original priorities
+	if ! restore_priorities "${ports[0]}" "${original_dscp_prios_port0}"; then
+		RET=1
+	fi
+
+	set_apptrust_order ${swp1} "${orig_apptrust}"
+	if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then
+		RET=1
+	fi
+
+	dcb app replace dev ${swp1} default-prio ${orig_port_prio}
+	if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then
+		RET=1
+	fi
+
+	log_test "DSCP global map"
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	test_port_default
+	test_port_apptrust
+	test_global_dscp_map
+"
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh
index 91891b9418d7..877cd6df94a1 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh
@@ -24,8 +24,8 @@ setup_prepare()
 	busywait "$TIMEOUT" wait_for_port_up ethtool $swp2
 	check_err $? "ports did not come up"
 
-	local lanes_exist=$(ethtool $swp1 | grep 'Lanes:')
-	if [[ -z $lanes_exist ]]; then
+	busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:"
+	if [[ $? -ne 0 ]]; then
 		log_test "SKIP: driver does not support lanes setting"
 		exit 1
 	fi
@@ -122,8 +122,9 @@ autoneg()
 			ethtool_set $swp1 speed $max_speed lanes $lanes
 			ip link set dev $swp1 up
 			ip link set dev $swp2 up
-			busywait "$TIMEOUT" wait_for_port_up ethtool $swp2
-			check_err $? "ports did not come up"
+
+			busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:"
+			check_err $? "Lanes parameter is not presented on time"
 
 			check_lanes $swp1 $lanes $max_speed
 			log_test "$lanes lanes is autonegotiated"
@@ -160,8 +161,9 @@ autoneg_force_mode()
 			ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off
 			ip link set dev $swp1 up
 			ip link set dev $swp2 up
-			busywait "$TIMEOUT" wait_for_port_up ethtool $swp2
-			check_err $? "ports did not come up"
+
+			busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:"
+			check_err $? "Lanes parameter is not presented on time"
 
 			check_lanes $swp1 $lanes $max_speed
 			log_test "Autoneg off, $lanes lanes detected during force mode"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh
index 6369927e9c37..48395cfd4f95 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh
@@ -42,7 +42,7 @@ __mlxsw_only_on_spectrum()
 	local src=$1; shift
 
 	if ! mlxsw_on_spectrum "$rev"; then
-		log_test_skip $src:$caller "(Spectrum-$rev only)"
+		log_test_xfail $src:$caller "(Spectrum-$rev only)"
 		return 1
 	fi
 }
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
index a88d8a8c85f2..899b6892603f 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
@@ -47,7 +47,6 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 		RET=0
 		target=$(${current_test}_get_target "$should_fail")
 		if ((target == 0)); then
-			log_test_skip "'$current_test' should_fail=$should_fail test"
 			continue
 		fi
 
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
index f981c957f097..482ebb744eba 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -52,7 +52,6 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 			RET=0
 			target=$(${current_test}_get_target "$should_fail")
 			if ((target == 0)); then
-				log_test_skip "'$current_test' [$profile] should_fail=$should_fail test"
 				continue
 			fi
 			${current_test}_setup_prepare
diff --git a/tools/testing/selftests/drivers/net/ping.py b/tools/testing/selftests/drivers/net/ping.py
new file mode 100755
index 000000000000..eb83e7b48797
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/ping.py
@@ -0,0 +1,51 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+from lib.py import ksft_run, ksft_exit
+from lib.py import ksft_eq
+from lib.py import NetDrvEpEnv
+from lib.py import bkg, cmd, wait_port_listen, rand_port
+
+
+def test_v4(cfg) -> None:
+    cfg.require_v4()
+
+    cmd(f"ping -c 1 -W0.5 {cfg.remote_v4}")
+    cmd(f"ping -c 1 -W0.5 {cfg.v4}", host=cfg.remote)
+
+
+def test_v6(cfg) -> None:
+    cfg.require_v6()
+
+    cmd(f"ping -c 1 -W0.5 {cfg.remote_v6}")
+    cmd(f"ping -c 1 -W0.5 {cfg.v6}", host=cfg.remote)
+
+
+def test_tcp(cfg) -> None:
+    cfg.require_cmd("socat", remote=True)
+
+    port = rand_port()
+    listen_cmd = f"socat -{cfg.addr_ipver} -t 2 -u TCP-LISTEN:{port},reuseport STDOUT"
+
+    with bkg(listen_cmd, exit_wait=True) as nc:
+        wait_port_listen(port)
+
+        cmd(f"echo ping | socat -t 2 -u STDIN TCP:{cfg.baddr}:{port}",
+            shell=True, host=cfg.remote)
+    ksft_eq(nc.stdout.strip(), "ping")
+
+    with bkg(listen_cmd, host=cfg.remote, exit_wait=True) as nc:
+        wait_port_listen(port, host=cfg.remote)
+
+        cmd(f"echo ping | socat -t 2 -u STDIN TCP:{cfg.remote_baddr}:{port}", shell=True)
+    ksft_eq(nc.stdout.strip(), "ping")
+
+
+def main() -> None:
+    with NetDrvEpEnv(__file__) as cfg:
+        ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py
new file mode 100755
index 000000000000..30f29096e27c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/queues.py
@@ -0,0 +1,66 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+from lib.py import ksft_run, ksft_exit, ksft_eq, KsftSkipEx
+from lib.py import EthtoolFamily, NetdevFamily
+from lib.py import NetDrvEnv
+from lib.py import cmd
+import glob
+
+
+def sys_get_queues(ifname) -> int:
+    folders = glob.glob(f'/sys/class/net/{ifname}/queues/rx-*')
+    return len(folders)
+
+
+def nl_get_queues(cfg, nl):
+    queues = nl.queue_get({'ifindex': cfg.ifindex}, dump=True)
+    if queues:
+        return len([q for q in queues if q['type'] == 'rx'])
+    return None
+
+
+def get_queues(cfg, nl) -> None:
+    queues = nl_get_queues(cfg, nl)
+    if not queues:
+        raise KsftSkipEx('queue-get not supported by device')
+
+    expected = sys_get_queues(cfg.dev['ifname'])
+    ksft_eq(queues, expected)
+
+
+def addremove_queues(cfg, nl) -> None:
+    queues = nl_get_queues(cfg, nl)
+    if not queues:
+        raise KsftSkipEx('queue-get not supported by device')
+
+    curr_queues = sys_get_queues(cfg.dev['ifname'])
+    if curr_queues == 1:
+        raise KsftSkipEx('cannot decrement queue: already at 1')
+
+    netnl = EthtoolFamily()
+    channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}})
+    if channels['combined-count'] == 0:
+        rx_type = 'rx'
+    else:
+        rx_type = 'combined'
+
+    expected = curr_queues - 1
+    cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10)
+    queues = nl_get_queues(cfg, nl)
+    ksft_eq(queues, expected)
+
+    expected = curr_queues
+    cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10)
+    queues = nl_get_queues(cfg, nl)
+    ksft_eq(queues, expected)
+
+
+def main() -> None:
+    with NetDrvEnv(__file__, queue_count=3) as cfg:
+        ksft_run([get_queues, addremove_queues], args=(cfg, NetdevFamily()))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py
new file mode 100755
index 000000000000..7a7b16b180e2
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/stats.py
@@ -0,0 +1,144 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+from lib.py import ksft_run, ksft_exit, ksft_pr
+from lib.py import ksft_ge, ksft_eq, ksft_in, ksft_true, ksft_raises, KsftSkipEx, KsftXfailEx
+from lib.py import EthtoolFamily, NetdevFamily, RtnlFamily, NlError
+from lib.py import NetDrvEnv
+
+ethnl = EthtoolFamily()
+netfam = NetdevFamily()
+rtnl = RtnlFamily()
+
+
+def check_pause(cfg) -> None:
+    global ethnl
+
+    try:
+        ethnl.pause_get({"header": {"dev-index": cfg.ifindex}})
+    except NlError as e:
+        if e.error == 95:
+            raise KsftXfailEx("pause not supported by the device")
+        raise
+
+    data = ethnl.pause_get({"header": {"dev-index": cfg.ifindex,
+                                       "flags": {'stats'}}})
+    ksft_true(data['stats'], "driver does not report stats")
+
+
+def check_fec(cfg) -> None:
+    global ethnl
+
+    try:
+        ethnl.fec_get({"header": {"dev-index": cfg.ifindex}})
+    except NlError as e:
+        if e.error == 95:
+            raise KsftXfailEx("FEC not supported by the device")
+        raise
+
+    data = ethnl.fec_get({"header": {"dev-index": cfg.ifindex,
+                                     "flags": {'stats'}}})
+    ksft_true(data['stats'], "driver does not report stats")
+
+
+def pkt_byte_sum(cfg) -> None:
+    global netfam, rtnl
+
+    def get_qstat(test):
+        global netfam
+        stats = netfam.qstats_get({}, dump=True)
+        if stats:
+            for qs in stats:
+                if qs["ifindex"]== test.ifindex:
+                    return qs
+
+    qstat = get_qstat(cfg)
+    if qstat is None:
+        raise KsftSkipEx("qstats not supported by the device")
+
+    for key in ['tx-packets', 'tx-bytes', 'rx-packets', 'rx-bytes']:
+        ksft_in(key, qstat, "Drivers should always report basic keys")
+
+    # Compare stats, rtnl stats and qstats must match,
+    # but the interface may be up, so do a series of dumps
+    # each time the more "recent" stats must be higher or same.
+    def stat_cmp(rstat, qstat):
+        for key in ['tx-packets', 'tx-bytes', 'rx-packets', 'rx-bytes']:
+            if rstat[key] != qstat[key]:
+                return rstat[key] - qstat[key]
+        return 0
+
+    for _ in range(10):
+        rtstat = rtnl.getlink({"ifi-index": cfg.ifindex})['stats']
+        if stat_cmp(rtstat, qstat) < 0:
+            raise Exception("RTNL stats are lower, fetched later")
+        qstat = get_qstat(cfg)
+        if stat_cmp(rtstat, qstat) > 0:
+            raise Exception("Qstats are lower, fetched later")
+
+
+def qstat_by_ifindex(cfg) -> None:
+    global netfam
+    global rtnl
+
+    # Construct a map ifindex -> [dump, by-index, dump]
+    ifindexes = {}
+    stats = netfam.qstats_get({}, dump=True)
+    for entry in stats:
+        ifindexes[entry['ifindex']] = [entry, None, None]
+
+    for ifindex in ifindexes.keys():
+        entry = netfam.qstats_get({"ifindex": ifindex}, dump=True)
+        ksft_eq(len(entry), 1)
+        ifindexes[entry[0]['ifindex']][1] = entry[0]
+
+    stats = netfam.qstats_get({}, dump=True)
+    for entry in stats:
+        ifindexes[entry['ifindex']][2] = entry
+
+    if len(ifindexes) == 0:
+        raise KsftSkipEx("No ifindex supports qstats")
+
+    # Now make sure the stats match/make sense
+    for ifindex, triple in ifindexes.items():
+        all_keys = triple[0].keys() | triple[1].keys() | triple[2].keys()
+
+        for key in all_keys:
+            ksft_ge(triple[1][key], triple[0][key], comment="bad key: " + key)
+            ksft_ge(triple[2][key], triple[1][key], comment="bad key: " + key)
+
+    # Test invalid dumps
+    # 0 is invalid
+    with ksft_raises(NlError) as cm:
+        netfam.qstats_get({"ifindex": 0}, dump=True)
+    ksft_eq(cm.exception.nl_msg.error, -34)
+    ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex')
+
+    # loopback has no stats
+    with ksft_raises(NlError) as cm:
+        netfam.qstats_get({"ifindex": 1}, dump=True)
+    ksft_eq(cm.exception.nl_msg.error, -95)
+    ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex')
+
+    # Try to get stats for lowest unused ifindex but not 0
+    devs = rtnl.getlink({}, dump=True)
+    all_ifindexes = set([dev["ifi-index"] for dev in devs])
+    lowest = 2
+    while lowest in all_ifindexes:
+        lowest += 1
+
+    with ksft_raises(NlError) as cm:
+        netfam.qstats_get({"ifindex": lowest}, dump=True)
+    ksft_eq(cm.exception.nl_msg.error, -19)
+    ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex')
+
+
+def main() -> None:
+    with NetDrvEnv(__file__) as cfg:
+        ksft_run([check_pause, check_fec, pkt_byte_sum, qstat_by_ifindex],
+                 args=(cfg, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/drivers/net/virtio_net/Makefile b/tools/testing/selftests/drivers/net/virtio_net/Makefile
new file mode 100644
index 000000000000..7ec7cd3ab2cc
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/virtio_net/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+TEST_PROGS = basic_features.sh \
+        #
+
+TEST_FILES = \
+        virtio_net_common.sh \
+        #
+
+TEST_INCLUDES = \
+        ../../../net/forwarding/lib.sh \
+        ../../../net/lib.sh \
+        #
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh
new file mode 100755
index 000000000000..cf8cf816ed48
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh
@@ -0,0 +1,131 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# See virtio_net_common.sh comments for more details about assumed setup
+
+ALL_TESTS="
+	initial_ping_test
+	f_mac_test
+"
+
+source virtio_net_common.sh
+
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+h1=${NETIFS[p1]}
+h2=${NETIFS[p2]}
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+initial_ping_test()
+{
+	setup_cleanup
+	setup_prepare
+	ping_test $h1 $H2_IPV4 " simple"
+}
+
+f_mac_test()
+{
+	RET=0
+	local test_name="mac feature filtered"
+
+	virtio_feature_present $h1 $VIRTIO_NET_F_MAC
+	if [ $? -ne 0 ]; then
+		log_test_skip "$test_name" "Device $h1 is missing feature $VIRTIO_NET_F_MAC."
+		return 0
+	fi
+	virtio_feature_present $h1 $VIRTIO_NET_F_MAC
+	if [ $? -ne 0 ]; then
+		log_test_skip "$test_name" "Device $h2 is missing feature $VIRTIO_NET_F_MAC."
+		return 0
+	fi
+
+	setup_cleanup
+	setup_prepare
+
+	grep -q 0 /sys/class/net/$h1/addr_assign_type
+	check_err $? "Permanent address assign type for $h1 is not set"
+	grep -q 0 /sys/class/net/$h2/addr_assign_type
+	check_err $? "Permanent address assign type for $h2 is not set"
+
+	setup_cleanup
+	virtio_filter_feature_add $h1 $VIRTIO_NET_F_MAC
+	virtio_filter_feature_add $h2 $VIRTIO_NET_F_MAC
+	setup_prepare
+
+	grep -q 0 /sys/class/net/$h1/addr_assign_type
+	check_fail $? "Permanent address assign type for $h1 is set when F_MAC feature is filtered"
+	grep -q 0 /sys/class/net/$h2/addr_assign_type
+	check_fail $? "Permanent address assign type for $h2 is set when F_MAC feature is filtered"
+
+	ping_do $h1 $H2_IPV4
+	check_err $? "Ping failed"
+
+	log_test "$test_name"
+}
+
+setup_prepare()
+{
+	virtio_device_rebind $h1
+	virtio_device_rebind $h2
+	wait_for_dev $h1
+	wait_for_dev $h2
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+setup_cleanup()
+{
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	virtio_filter_features_clear $h1
+	virtio_filter_features_clear $h2
+	virtio_device_rebind $h1
+	virtio_device_rebind $h2
+	wait_for_dev $h1
+	wait_for_dev $h2
+}
+
+cleanup()
+{
+	pre_cleanup
+	setup_cleanup
+}
+
+check_driver $h1 "virtio_net"
+check_driver $h2 "virtio_net"
+check_virtio_debugfs $h1
+check_virtio_debugfs $h2
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/virtio_net/config b/tools/testing/selftests/drivers/net/virtio_net/config
new file mode 100644
index 000000000000..f35de0542b60
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/virtio_net/config
@@ -0,0 +1,2 @@
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_DEBUG=y
diff --git a/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh b/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh
new file mode 100644
index 000000000000..57bd8055e2e5
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh
@@ -0,0 +1,99 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This assumes running on a host with two virtio interfaces connected
+# back to back. Example script to do such wire-up of tap devices would
+# look like this:
+#
+# =======================================================================================================
+# #!/bin/bash
+#
+# DEV1="$1"
+# DEV2="$2"
+#
+# sudo tc qdisc add dev $DEV1 clsact
+# sudo tc qdisc add dev $DEV2 clsact
+# sudo tc filter add dev $DEV1 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV2
+# sudo tc filter add dev $DEV2 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV1
+# sudo ip link set $DEV1 up
+# sudo ip link set $DEV2 up
+# =======================================================================================================
+
+REQUIRE_MZ="no"
+NETIF_CREATE="no"
+NETIF_FIND_DRIVER="virtio_net"
+NUM_NETIFS=2
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+VIRTIO_NET_F_MAC=5
+
+virtio_device_get()
+{
+	local dev=$1; shift
+	local device_path="/sys/class/net/$dev/device/"
+
+	basename `realpath $device_path`
+}
+
+virtio_device_rebind()
+{
+	local dev=$1; shift
+	local device=`virtio_device_get $dev`
+
+	echo "$device" > /sys/bus/virtio/drivers/virtio_net/unbind
+	echo "$device" > /sys/bus/virtio/drivers/virtio_net/bind
+}
+
+virtio_debugfs_get()
+{
+	local dev=$1; shift
+	local device=`virtio_device_get $dev`
+
+	echo /sys/kernel/debug/virtio/$device/
+}
+
+check_virtio_debugfs()
+{
+	local dev=$1; shift
+	local debugfs=`virtio_debugfs_get $dev`
+
+	if [ ! -f "$debugfs/device_features" ] ||
+	   [ ! -f "$debugfs/filter_feature_add"  ] ||
+	   [ ! -f "$debugfs/filter_feature_del"  ] ||
+	   [ ! -f "$debugfs/filter_features"  ] ||
+	   [ ! -f "$debugfs/filter_features_clear"  ]; then
+		echo "SKIP: not possible to access debugfs for $dev"
+		exit $ksft_skip
+	fi
+}
+
+virtio_feature_present()
+{
+	local dev=$1; shift
+	local feature=$1; shift
+	local debugfs=`virtio_debugfs_get $dev`
+
+	cat $debugfs/device_features |grep "^$feature$" &> /dev/null
+	return $?
+}
+
+virtio_filter_features_clear()
+{
+	local dev=$1; shift
+	local debugfs=`virtio_debugfs_get $dev`
+
+	echo "1" > $debugfs/filter_features_clear
+}
+
+virtio_filter_feature_add()
+{
+	local dev=$1; shift
+	local feature=$1; shift
+	local debugfs=`virtio_debugfs_get $dev`
+
+	echo "$feature" > $debugfs/filter_feature_add
+}
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index 7fa4a96e26ed..33c24ceddfb7 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -52,6 +52,20 @@ endif
 selfdir = $(realpath $(dir $(filter %/lib.mk,$(MAKEFILE_LIST))))
 top_srcdir = $(selfdir)/../../..
 
+# msg: emit succinct information message describing current building step
+# $1 - generic step name (e.g., CC, LINK, etc);
+# $2 - optional "flavor" specifier; if provided, will be emitted as [flavor];
+# $3 - target (assumed to be file); only file name will be emitted;
+# $4 - optional extra arg, emitted as-is, if provided.
+ifeq ($(V),1)
+Q =
+msg =
+else
+Q = @
+msg = @printf '  %-8s%s %s%s\n' "$(1)" "$(if $(2), [$(2)])" "$(notdir $(3))" "$(if $(4), $(4))";
+MAKEFLAGS += --no-print-directory
+endif
+
 ifeq ($(KHDR_INCLUDES),)
 KHDR_INCLUDES := -D_GNU_SOURCE -isystem $(top_srcdir)/usr/include
 endif
@@ -184,7 +198,8 @@ endif
 ifeq ($(OVERRIDE_TARGETS),)
 LOCAL_HDRS += $(selfdir)/kselftest_harness.h $(selfdir)/kselftest.h
 $(OUTPUT)/%:%.c $(LOCAL_HDRS)
-	$(LINK.c) $(filter-out $(LOCAL_HDRS),$^) $(LDLIBS) -o $@
+	$(call msg,CC,,$@)
+	$(Q)$(LINK.c) $(filter-out $(LOCAL_HDRS),$^) $(LDLIBS) -o $@
 
 $(OUTPUT)/%.o:%.S
 	$(COMPILE.S) $^ -o $@
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
index 2f9d378edec3..49a56eb5d036 100644
--- a/tools/testing/selftests/net/.gitignore
+++ b/tools/testing/selftests/net/.gitignore
@@ -2,9 +2,9 @@
 bind_bhash
 bind_timewait
 bind_wildcard
-csum
 cmsg_sender
 diag_uid
+epoll_busy_poll
 fin_ack_lat
 gro
 hwtstamp_config
@@ -31,6 +31,7 @@ reuseport_dualstack
 rxtimestamp
 sctp_hello
 scm_pidfd
+scm_rights
 sk_bind_sendto_listen
 sk_connect_zero_addr
 socket
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 7b6918d5f4af..bd01e4a0be2c 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -20,7 +20,6 @@ TEST_PROGS += reuseaddr_ports_exhausted.sh
 TEST_PROGS += txtimestamp.sh
 TEST_PROGS += vrf-xfrm-tests.sh
 TEST_PROGS += rxtimestamp.sh
-TEST_PROGS += devlink_port_split.py
 TEST_PROGS += drop_monitor_tests.sh
 TEST_PROGS += vrf_route_leaking.sh
 TEST_PROGS += bareudp.sh
@@ -35,6 +34,7 @@ TEST_PROGS += gre_gso.sh
 TEST_PROGS += cmsg_so_mark.sh
 TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh
 TEST_PROGS += netns-name.sh
+TEST_PROGS += nl_netdev.py
 TEST_PROGS += srv6_end_dt46_l3vpn_test.sh
 TEST_PROGS += srv6_end_dt4_l3vpn_test.sh
 TEST_PROGS += srv6_end_dt6_l3vpn_test.sh
@@ -67,7 +67,7 @@ TEST_GEN_FILES += ipsec
 TEST_GEN_FILES += ioam6_parser
 TEST_GEN_FILES += gro
 TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa
-TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap
+TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap epoll_busy_poll
 TEST_GEN_FILES += toeplitz
 TEST_GEN_FILES += cmsg_sender
 TEST_GEN_FILES += stress_reuseport_listen
@@ -81,9 +81,6 @@ TEST_PROGS += test_ingress_egress_chaining.sh
 TEST_GEN_PROGS += so_incoming_cpu
 TEST_PROGS += sctp_vrf.sh
 TEST_GEN_FILES += sctp_hello
-TEST_GEN_FILES += csum
-TEST_GEN_FILES += nat6to4.o
-TEST_GEN_FILES += xdp_dummy.o
 TEST_GEN_FILES += ip_local_port_range
 TEST_GEN_FILES += bind_wildcard
 TEST_PROGS += test_vxlan_mdb.sh
@@ -93,63 +90,22 @@ TEST_PROGS += test_bridge_backup_port.sh
 TEST_PROGS += fdb_flush.sh
 TEST_PROGS += fq_band_pktlimit.sh
 TEST_PROGS += vlan_hw_filter.sh
+TEST_PROGS += bpf_offload.py
 
 TEST_FILES := settings
 TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh
 
+TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c))
+
 TEST_INCLUDES := forwarding/lib.sh
 
 include ../lib.mk
 
+$(OUTPUT)/epoll_busy_poll: LDLIBS += -lcap
 $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
 $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto
 $(OUTPUT)/tcp_inq: LDLIBS += -lpthread
 $(OUTPUT)/bind_bhash: LDLIBS += -lpthread
 $(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/
 
-# Rules to generate bpf objs
-CLANG ?= clang
-SCRATCH_DIR := $(OUTPUT)/tools
-BUILD_DIR := $(SCRATCH_DIR)/build
-BPFDIR := $(abspath ../../../lib/bpf)
-APIDIR := $(abspath ../../../include/uapi)
-
-CCINCLUDE += -I../bpf
-CCINCLUDE += -I../../../../usr/include/
-CCINCLUDE += -I$(SCRATCH_DIR)/include
-
-BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
-
-MAKE_DIRS := $(BUILD_DIR)/libbpf
-$(MAKE_DIRS):
-	mkdir -p $@
-
-# Get Clang's default includes on this system, as opposed to those seen by
-# '--target=bpf'. This fixes "missing" files on some architectures/distros,
-# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc.
-#
-# Use '-idirafter': Don't interfere with include mechanics except where the
-# build would have failed anyways.
-define get_sys_includes
-$(shell $(1) $(2) -v -E - </dev/null 2>&1 \
-	| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \
-$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
-endef
-
-ifneq ($(CROSS_COMPILE),)
-CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%))
-endif
-
-CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH))
-
-$(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o: $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS)
-	$(CLANG) -O2 --target=bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@
-
-$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile)		       \
-	   $(APIDIR)/linux/bpf.h					       \
-	   | $(BUILD_DIR)/libbpf
-	$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/     \
-		    EXTRA_CFLAGS='-g -O0'				       \
-		    DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
-
-EXTRA_CLEAN := $(SCRATCH_DIR)
+include bpf.mk
diff --git a/tools/testing/selftests/net/af_unix/Makefile b/tools/testing/selftests/net/af_unix/Makefile
index 221c387a7d7f..3b83c797650d 100644
--- a/tools/testing/selftests/net/af_unix/Makefile
+++ b/tools/testing/selftests/net/af_unix/Makefile
@@ -1,4 +1,4 @@
 CFLAGS += $(KHDR_INCLUDES)
-TEST_GEN_PROGS := diag_uid test_unix_oob unix_connect scm_pidfd
+TEST_GEN_PROGS := diag_uid test_unix_oob unix_connect scm_pidfd scm_rights
 
 include ../../lib.mk
diff --git a/tools/testing/selftests/net/af_unix/scm_rights.c b/tools/testing/selftests/net/af_unix/scm_rights.c
new file mode 100644
index 000000000000..bab606c9f1eb
--- /dev/null
+++ b/tools/testing/selftests/net/af_unix/scm_rights.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright Amazon.com Inc. or its affiliates. */
+#define _GNU_SOURCE
+#include <sched.h>
+
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+
+#include "../../kselftest_harness.h"
+
+FIXTURE(scm_rights)
+{
+	int fd[16];
+};
+
+FIXTURE_VARIANT(scm_rights)
+{
+	char name[16];
+	int type;
+	int flags;
+	bool test_listener;
+};
+
+FIXTURE_VARIANT_ADD(scm_rights, dgram)
+{
+	.name = "UNIX ",
+	.type = SOCK_DGRAM,
+	.flags = 0,
+	.test_listener = false,
+};
+
+FIXTURE_VARIANT_ADD(scm_rights, stream)
+{
+	.name = "UNIX-STREAM ",
+	.type = SOCK_STREAM,
+	.flags = 0,
+	.test_listener = false,
+};
+
+FIXTURE_VARIANT_ADD(scm_rights, stream_oob)
+{
+	.name = "UNIX-STREAM ",
+	.type = SOCK_STREAM,
+	.flags = MSG_OOB,
+	.test_listener = false,
+};
+
+FIXTURE_VARIANT_ADD(scm_rights, stream_listener)
+{
+	.name = "UNIX-STREAM ",
+	.type = SOCK_STREAM,
+	.flags = 0,
+	.test_listener = true,
+};
+
+FIXTURE_VARIANT_ADD(scm_rights, stream_listener_oob)
+{
+	.name = "UNIX-STREAM ",
+	.type = SOCK_STREAM,
+	.flags = MSG_OOB,
+	.test_listener = true,
+};
+
+static int count_sockets(struct __test_metadata *_metadata,
+			 const FIXTURE_VARIANT(scm_rights) *variant)
+{
+	int sockets = -1, len, ret;
+	char *line = NULL;
+	size_t unused;
+	FILE *f;
+
+	f = fopen("/proc/net/protocols", "r");
+	ASSERT_NE(NULL, f);
+
+	len = strlen(variant->name);
+
+	while (getline(&line, &unused, f) != -1) {
+		int unused2;
+
+		if (strncmp(line, variant->name, len))
+			continue;
+
+		ret = sscanf(line + len, "%d %d", &unused2, &sockets);
+		ASSERT_EQ(2, ret);
+
+		break;
+	}
+
+	free(line);
+
+	ret = fclose(f);
+	ASSERT_EQ(0, ret);
+
+	return sockets;
+}
+
+FIXTURE_SETUP(scm_rights)
+{
+	int ret;
+
+	ret = unshare(CLONE_NEWNET);
+	ASSERT_EQ(0, ret);
+
+	ret = count_sockets(_metadata, variant);
+	ASSERT_EQ(0, ret);
+}
+
+FIXTURE_TEARDOWN(scm_rights)
+{
+	int ret;
+
+	sleep(1);
+
+	ret = count_sockets(_metadata, variant);
+	ASSERT_EQ(0, ret);
+}
+
+static void create_listeners(struct __test_metadata *_metadata,
+			     FIXTURE_DATA(scm_rights) *self,
+			     int n)
+{
+	struct sockaddr_un addr = {
+		.sun_family = AF_UNIX,
+	};
+	socklen_t addrlen;
+	int i, ret;
+
+	for (i = 0; i < n * 2; i += 2) {
+		self->fd[i] = socket(AF_UNIX, SOCK_STREAM, 0);
+		ASSERT_LE(0, self->fd[i]);
+
+		addrlen = sizeof(addr.sun_family);
+		ret = bind(self->fd[i], (struct sockaddr *)&addr, addrlen);
+		ASSERT_EQ(0, ret);
+
+		ret = listen(self->fd[i], -1);
+		ASSERT_EQ(0, ret);
+
+		addrlen = sizeof(addr);
+		ret = getsockname(self->fd[i], (struct sockaddr *)&addr, &addrlen);
+		ASSERT_EQ(0, ret);
+
+		self->fd[i + 1] = socket(AF_UNIX, SOCK_STREAM, 0);
+		ASSERT_LE(0, self->fd[i + 1]);
+
+		ret = connect(self->fd[i + 1], (struct sockaddr *)&addr, addrlen);
+		ASSERT_EQ(0, ret);
+	}
+}
+
+static void create_socketpairs(struct __test_metadata *_metadata,
+			       FIXTURE_DATA(scm_rights) *self,
+			       const FIXTURE_VARIANT(scm_rights) *variant,
+			       int n)
+{
+	int i, ret;
+
+	ASSERT_GE(sizeof(self->fd) / sizeof(int), n);
+
+	for (i = 0; i < n * 2; i += 2) {
+		ret = socketpair(AF_UNIX, variant->type, 0, self->fd + i);
+		ASSERT_EQ(0, ret);
+	}
+}
+
+static void __create_sockets(struct __test_metadata *_metadata,
+			     FIXTURE_DATA(scm_rights) *self,
+			     const FIXTURE_VARIANT(scm_rights) *variant,
+			     int n)
+{
+	if (variant->test_listener)
+		create_listeners(_metadata, self, n);
+	else
+		create_socketpairs(_metadata, self, variant, n);
+}
+
+static void __close_sockets(struct __test_metadata *_metadata,
+			    FIXTURE_DATA(scm_rights) *self,
+			    int n)
+{
+	int i, ret;
+
+	ASSERT_GE(sizeof(self->fd) / sizeof(int), n);
+
+	for (i = 0; i < n * 2; i++) {
+		ret = close(self->fd[i]);
+		ASSERT_EQ(0, ret);
+	}
+}
+
+void __send_fd(struct __test_metadata *_metadata,
+	       const FIXTURE_DATA(scm_rights) *self,
+	       const FIXTURE_VARIANT(scm_rights) *variant,
+	       int inflight, int receiver)
+{
+#define MSG "nop"
+#define MSGLEN 3
+	struct {
+		struct cmsghdr cmsghdr;
+		int fd[2];
+	} cmsg = {
+		.cmsghdr = {
+			.cmsg_len = CMSG_LEN(sizeof(cmsg.fd)),
+			.cmsg_level = SOL_SOCKET,
+			.cmsg_type = SCM_RIGHTS,
+		},
+		.fd = {
+			self->fd[inflight * 2],
+			self->fd[inflight * 2],
+		},
+	};
+	struct iovec iov = {
+		.iov_base = MSG,
+		.iov_len = MSGLEN,
+	};
+	struct msghdr msg = {
+		.msg_name = NULL,
+		.msg_namelen = 0,
+		.msg_iov = &iov,
+		.msg_iovlen = 1,
+		.msg_control = &cmsg,
+		.msg_controllen = CMSG_SPACE(sizeof(cmsg.fd)),
+	};
+	int ret;
+
+	ret = sendmsg(self->fd[receiver * 2 + 1], &msg, variant->flags);
+	ASSERT_EQ(MSGLEN, ret);
+}
+
+#define create_sockets(n)					\
+	__create_sockets(_metadata, self, variant, n)
+#define close_sockets(n)					\
+	__close_sockets(_metadata, self, n)
+#define send_fd(inflight, receiver)				\
+	__send_fd(_metadata, self, variant, inflight, receiver)
+
+TEST_F(scm_rights, self_ref)
+{
+	create_sockets(2);
+
+	send_fd(0, 0);
+
+	send_fd(1, 1);
+
+	close_sockets(2);
+}
+
+TEST_F(scm_rights, triangle)
+{
+	create_sockets(6);
+
+	send_fd(0, 1);
+	send_fd(1, 2);
+	send_fd(2, 0);
+
+	send_fd(3, 4);
+	send_fd(4, 5);
+	send_fd(5, 3);
+
+	close_sockets(6);
+}
+
+TEST_F(scm_rights, cross_edge)
+{
+	create_sockets(8);
+
+	send_fd(0, 1);
+	send_fd(1, 2);
+	send_fd(2, 0);
+	send_fd(1, 3);
+	send_fd(3, 2);
+
+	send_fd(4, 5);
+	send_fd(5, 6);
+	send_fd(6, 4);
+	send_fd(5, 7);
+	send_fd(7, 6);
+
+	close_sockets(8);
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/net/amt.sh b/tools/testing/selftests/net/amt.sh
index 75528788cb95..5175a42cbe8a 100755
--- a/tools/testing/selftests/net/amt.sh
+++ b/tools/testing/selftests/net/amt.sh
@@ -210,8 +210,8 @@ check_features()
 
 test_ipv4_forward()
 {
-	RESULT4=$(ip netns exec "${LISTENER}" nc -w 1 -l -u 239.0.0.1 4000)
-	if [ "$RESULT4" == "172.17.0.2" ]; then
+	RESULT4=$(ip netns exec "${LISTENER}" timeout 15 socat - UDP4-LISTEN:4000,readbytes=128 || true)
+	if echo "$RESULT4" | grep -q "172.17.0.2"; then
 		printf "TEST: %-60s  [ OK ]\n" "IPv4 amt multicast forwarding"
 		exit 0
 	else
@@ -222,8 +222,8 @@ test_ipv4_forward()
 
 test_ipv6_forward()
 {
-	RESULT6=$(ip netns exec "${LISTENER}" nc -w 1 -l -u ff0e::5:6 6000)
-	if [ "$RESULT6" == "2001:db8:3::2" ]; then
+	RESULT6=$(ip netns exec "${LISTENER}" timeout 15 socat - UDP6-LISTEN:6000,readbytes=128 || true)
+	if echo "$RESULT6" | grep -q "2001:db8:3::2"; then
 		printf "TEST: %-60s  [ OK ]\n" "IPv6 amt multicast forwarding"
 		exit 0
 	else
@@ -236,14 +236,14 @@ send_mcast4()
 {
 	sleep 2
 	ip netns exec "${SOURCE}" bash -c \
-		'echo 172.17.0.2 | nc -w 1 -u 239.0.0.1 4000' &
+		'printf "%s %128s" 172.17.0.2 | nc -w 1 -u 239.0.0.1 4000' &
 }
 
 send_mcast6()
 {
 	sleep 2
 	ip netns exec "${SOURCE}" bash -c \
-		'echo 2001:db8:3::2 | nc -w 1 -u ff0e::5:6 6000' &
+		'printf "%s %128s" 2001:db8:3::2 | nc -w 1 -u ff0e::5:6 6000' &
 }
 
 check_features
diff --git a/tools/testing/selftests/net/bpf.mk b/tools/testing/selftests/net/bpf.mk
new file mode 100644
index 000000000000..a4f6755dd894
--- /dev/null
+++ b/tools/testing/selftests/net/bpf.mk
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+# Rules to generate bpf objs
+CLANG ?= clang
+SCRATCH_DIR := $(OUTPUT)/tools
+BUILD_DIR := $(SCRATCH_DIR)/build
+BPFDIR := $(top_srcdir)/tools/lib/bpf
+APIDIR := $(top_srcdir)/tools/include/uapi
+
+CCINCLUDE += -I$(selfdir)/bpf
+CCINCLUDE += -I$(top_srcdir)/usr/include/
+CCINCLUDE += -I$(SCRATCH_DIR)/include
+
+BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
+
+MAKE_DIRS := $(BUILD_DIR)/libbpf
+$(MAKE_DIRS):
+	$(call msg,MKDIR,,$@)
+	$(Q)mkdir -p $@
+
+# Get Clang's default includes on this system, as opposed to those seen by
+# '--target=bpf'. This fixes "missing" files on some architectures/distros,
+# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc.
+#
+# Use '-idirafter': Don't interfere with include mechanics except where the
+# build would have failed anyways.
+define get_sys_includes
+$(shell $(1) $(2) -v -E - </dev/null 2>&1 \
+	| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \
+$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
+endef
+
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%))
+endif
+
+CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH))
+
+BPF_PROG_OBJS := $(patsubst %.c,$(OUTPUT)/%.o,$(wildcard *.bpf.c))
+
+$(BPF_PROG_OBJS): $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS)
+	$(call msg,BPF_PROG,,$@)
+	$(Q)$(CLANG) -O2 -g --target=bpf $(CCINCLUDE) $(CLANG_SYS_INCLUDES) \
+	-c $< -o $@
+
+$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile)		       \
+	   $(APIDIR)/linux/bpf.h					       \
+	   | $(BUILD_DIR)/libbpf
+	$(call msg,MAKE,,$@)
+	$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \
+		    EXTRA_CFLAGS='-g -O0'				       \
+		    DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
+
+EXTRA_CLEAN += $(SCRATCH_DIR)
diff --git a/tools/testing/selftests/bpf/test_offload.py b/tools/testing/selftests/net/bpf_offload.py
index 6157f884d091..3efe44f6e92a 100755
--- a/tools/testing/selftests/bpf/test_offload.py
+++ b/tools/testing/selftests/net/bpf_offload.py
@@ -29,6 +29,9 @@ import subprocess
 import time
 import traceback
 
+from lib.py import NetdevSim, NetdevSimDev
+
+
 logfile = None
 log_level = 1
 skip_extack = False
@@ -145,8 +148,10 @@ def tool(name, args, flags, JSON=True, ns="", fail=True, include_stderr=False):
     if JSON:
         params += "%s " % (flags["json"])
 
-    if ns != "":
+    if ns:
         ns = "ip netns exec %s " % (ns)
+    elif ns is None:
+        ns = ""
 
     if include_stderr:
         ret, stdout, stderr = cmd(ns + name + " " + params + args,
@@ -201,11 +206,11 @@ def bpftool_prog_list_wait(expected=0, n_retry=20):
         time.sleep(0.05)
     raise Exception("Time out waiting for program counts to stabilize want %d, have %d" % (expected, nprogs))
 
-def bpftool_map_list_wait(expected=0, n_retry=20):
+def bpftool_map_list_wait(expected=0, n_retry=20, ns=""):
     for i in range(n_retry):
-        nmaps = len(bpftool_map_list())
-        if nmaps == expected:
-            return
+        maps = bpftool_map_list(ns=ns)
+        if len(maps) == expected:
+            return maps
         time.sleep(0.05)
     raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps))
 
@@ -237,7 +242,7 @@ def tc(args, JSON=True, ns="", fail=True, include_stderr=False):
 def ethtool(dev, opt, args, fail=True):
     return cmd("ethtool %s %s %s" % (opt, dev["ifname"], args), fail=fail)
 
-def bpf_obj(name, sec=".text", path=bpf_test_dir,):
+def bpf_obj(name, sec="xdp", path=bpf_test_dir,):
     return "obj %s sec %s" % (os.path.join(path, name), sec)
 
 def bpf_pinned(name):
@@ -334,72 +339,16 @@ class DebugfsDir:
 
         return dfs
 
-class NetdevSimDev:
+class BpfNetdevSimDev(NetdevSimDev):
     """
     Class for netdevsim bus device and its attributes.
     """
-    @staticmethod
-    def ctrl_write(path, val):
-        fullpath = os.path.join("/sys/bus/netdevsim/", path)
-        try:
-            with open(fullpath, "w") as f:
-                f.write(val)
-        except OSError as e:
-            log("WRITE %s: %r" % (fullpath, val), -e.errno)
-            raise e
-        log("WRITE %s: %r" % (fullpath, val), 0)
-
-    def __init__(self, port_count=1):
-        addr = 0
-        while True:
-            try:
-                self.ctrl_write("new_device", "%u %u" % (addr, port_count))
-            except OSError as e:
-                if e.errno == errno.ENOSPC:
-                    addr += 1
-                    continue
-                raise e
-            break
-        self.addr = addr
-
-        # As probe of netdevsim device might happen from a workqueue,
-        # so wait here until all netdevs appear.
-        self.wait_for_netdevs(port_count)
-
-        ret, out = cmd("udevadm settle", fail=False)
-        if ret:
-            raise Exception("udevadm settle failed")
-        ifnames = self.get_ifnames()
-
+    def __init__(self, port_count=1, ns=None):
+        super().__init__(port_count, ns=ns)
         devs.append(self)
-        self.dfs_dir = "/sys/kernel/debug/netdevsim/netdevsim%u/" % addr
-
-        self.nsims = []
-        for port_index in range(port_count):
-            self.nsims.append(NetdevSim(self, port_index, ifnames[port_index]))
-
-    def get_ifnames(self):
-        ifnames = []
-        listdir = os.listdir("/sys/bus/netdevsim/devices/netdevsim%u/net/" % self.addr)
-        for ifname in listdir:
-            ifnames.append(ifname)
-        ifnames.sort()
-        return ifnames
-
-    def wait_for_netdevs(self, port_count):
-        timeout = 5
-        timeout_start = time.time()
-
-        while True:
-            try:
-                ifnames = self.get_ifnames()
-            except FileNotFoundError as e:
-                ifnames = []
-            if len(ifnames) == port_count:
-                break
-            if time.time() < timeout_start + timeout:
-                continue
-            raise Exception("netdevices did not appear within timeout")
+
+    def _make_port(self, port_index, ifname):
+        return BpfNetdevSim(self, port_index, ifname, self.ns)
 
     def dfs_num_bound_progs(self):
         path = os.path.join(self.dfs_dir, "bpf_bound_progs")
@@ -415,33 +364,20 @@ class NetdevSimDev:
         return progs
 
     def remove(self):
-        self.ctrl_write("del_device", "%u" % (self.addr, ))
+        super().remove()
         devs.remove(self)
 
-    def remove_nsim(self, nsim):
-        self.nsims.remove(nsim)
-        self.ctrl_write("devices/netdevsim%u/del_port" % (self.addr, ),
-                        "%u" % (nsim.port_index, ))
 
-class NetdevSim:
+class BpfNetdevSim(NetdevSim):
     """
     Class for netdevsim netdevice and its attributes.
     """
 
-    def __init__(self, nsimdev, port_index, ifname):
-        # In case udev renamed the netdev to according to new schema,
-        # check if the name matches the port_index.
-        nsimnamere = re.compile("eni\d+np(\d+)")
-        match = nsimnamere.match(ifname)
-        if match and int(match.groups()[0]) != port_index + 1:
-            raise Exception("netdevice name mismatches the expected one")
-
-        self.nsimdev = nsimdev
-        self.port_index = port_index
-        self.ns = ""
+    def __init__(self, nsimdev, port_index, ifname, ns=None):
+        super().__init__(nsimdev, port_index, ifname, ns=ns)
+
         self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index)
         self.dfs_refresh()
-        _, [self.dev] = ip("link show dev %s" % ifname)
 
     def __getitem__(self, key):
         return self.dev[key]
@@ -468,7 +404,7 @@ class NetdevSim:
         raise Exception("Time out waiting for program counts to stabilize want %d/%d, have %d bound, %d loaded" % (bound, total, nbound, nprogs))
 
     def set_ns(self, ns):
-        name = "1" if ns == "" else ns
+        name = ns if ns else "1"
         ip("link set dev %s netns %s" % (self.dev["ifname"], name), ns=self.ns)
         self.ns = ns
 
@@ -605,7 +541,7 @@ def pin_prog(file_name, idx=0):
     return file_name, bpf_pinned(file_name)
 
 def pin_map(file_name, idx=0, expected=1):
-    maps = bpftool_map_list(expected=expected)
+    maps = bpftool_map_list_wait(expected=expected)
     m = maps[idx]
     bpftool("map pin id %d %s" % (m["id"], file_name))
     files.append(file_name)
@@ -618,7 +554,7 @@ def check_dev_info_removed(prog_file=None, map_file=None):
     ret, err = bpftool("prog show pin %s" % (prog_file), fail=False)
     fail(ret != 0, "failed to show prog with removed device")
 
-    bpftool_map_list(expected=0)
+    bpftool_map_list_wait(expected=0)
     ret, err = bpftool("map show pin %s" % (map_file), fail=False)
     fail(ret == 0, "Showing map with removed device did not fail")
     fail(err["error"].find("No such device") == -1,
@@ -642,7 +578,7 @@ def check_dev_info(other_ns, ns, prog_file=None, map_file=None, removed=False):
     else:
         fail("ifname" in dev.keys(), "Ifname is reported for other ns")
 
-    maps = bpftool_map_list(expected=2, ns=ns)
+    maps = bpftool_map_list_wait(expected=2, ns=ns)
     for m in maps:
         fail("dev" not in m.keys(), "Device parameters not reported")
         fail(dev != m["dev"], "Map's device different than program's")
@@ -744,7 +680,7 @@ def test_multi_prog(simdev, sim, obj, modename, modeid):
     start_test("Test multi-attachment XDP - device remove...")
     simdev.remove()
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.set_ethtool_tc_offloads(True)
     return [simdev, sim]
@@ -809,13 +745,13 @@ try:
     bytecode = bpf_bytecode("1,6 0 0 4294967295,")
 
     start_test("Test destruction of generic XDP...")
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.set_xdp(obj, "generic")
     simdev.remove()
     bpftool_prog_list_wait(expected=0)
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.tc_add_ingress()
 
@@ -967,7 +903,7 @@ try:
     simdev.remove()
     bpftool_prog_list_wait(expected=0)
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.set_ethtool_tc_offloads(True)
 
@@ -976,7 +912,7 @@ try:
     simdev.remove()
     bpftool_prog_list_wait(expected=0)
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.set_ethtool_tc_offloads(True)
 
@@ -1080,7 +1016,7 @@ try:
     bpftool_prog_list_wait(expected=0)
 
     start_test("Test attempt to use a program for a wrong device...")
-    simdev2 = NetdevSimDev()
+    simdev2 = BpfNetdevSimDev()
     sim2, = simdev2.nsims
     sim2.set_xdp(obj, "offload")
     pin_file, pinned = pin_prog("/sys/fs/bpf/tmp")
@@ -1169,7 +1105,7 @@ try:
     clean_up()
     bpftool_prog_list_wait(expected=0)
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     map_obj = bpf_obj("sample_map_ret0.bpf.o")
     start_test("Test loading program with maps...")
@@ -1201,12 +1137,12 @@ try:
     clean_up()
     bpftool_prog_list_wait(expected=0)
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
 
     start_test("Test map update (no flags)...")
     sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON
-    maps = bpftool_map_list(expected=2)
+    maps = bpftool_map_list_wait(expected=2)
     array = maps[0] if maps[0]["type"] == "array" else maps[1]
     htab = maps[0] if maps[0]["type"] == "hash" else maps[1]
     for m in maps:
@@ -1285,14 +1221,14 @@ try:
     bpftool_map_list_wait(expected=0)
     simdev.remove()
 
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON
     simdev.remove()
     bpftool_map_list_wait(expected=0)
 
     start_test("Test map creation fail path...")
-    simdev = NetdevSimDev()
+    simdev = BpfNetdevSimDev()
     sim, = simdev.nsims
     sim.dfs["bpf_map_accept"] = "N"
     ret, _ = sim.set_xdp(map_obj, "offload", JSON=False, fail=False)
@@ -1302,9 +1238,9 @@ try:
     simdev.remove()
 
     start_test("Test multi-dev ASIC program reuse...")
-    simdevA = NetdevSimDev()
+    simdevA = BpfNetdevSimDev()
     simA, = simdevA.nsims
-    simdevB = NetdevSimDev(3)
+    simdevB = BpfNetdevSimDev(3)
     simB1, simB2, simB3 = simdevB.nsims
     sims = (simA, simB1, simB2, simB3)
     simB = (simB1, simB2, simB3)
diff --git a/tools/testing/selftests/net/cmsg_sender.c b/tools/testing/selftests/net/cmsg_sender.c
index c79e65581dc3..876c2db02a63 100644
--- a/tools/testing/selftests/net/cmsg_sender.c
+++ b/tools/testing/selftests/net/cmsg_sender.c
@@ -260,15 +260,8 @@ cs_write_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz)
 			  SOL_IPV6, IPV6_HOPLIMIT, &opt.v6.hlimit);
 
 	if (opt.txtime.ena) {
-		struct sock_txtime so_txtime = {
-			.clockid = CLOCK_MONOTONIC,
-		};
 		__u64 txtime;
 
-		if (setsockopt(fd, SOL_SOCKET, SO_TXTIME,
-			       &so_txtime, sizeof(so_txtime)))
-			error(ERN_SOCKOPT, errno, "setsockopt TXTIME");
-
 		txtime = time_start_mono.tv_sec * (1000ULL * 1000 * 1000) +
 			 time_start_mono.tv_nsec +
 			 opt.txtime.delay * 1000;
@@ -284,13 +277,6 @@ cs_write_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz)
 		memcpy(CMSG_DATA(cmsg), &txtime, sizeof(txtime));
 	}
 	if (opt.ts.ena) {
-		__u32 val = SOF_TIMESTAMPING_SOFTWARE |
-			    SOF_TIMESTAMPING_OPT_TSONLY;
-
-		if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING,
-			       &val, sizeof(val)))
-			error(ERN_SOCKOPT, errno, "setsockopt TIMESTAMPING");
-
 		cmsg = (struct cmsghdr *)(cbuf + cmsg_len);
 		cmsg_len += CMSG_SPACE(sizeof(__u32));
 		if (cbuf_sz < cmsg_len)
@@ -333,16 +319,17 @@ static const char *cs_ts_info2str(unsigned int info)
 	return "unknown";
 }
 
-static void
+static unsigned long
 cs_read_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz)
 {
 	struct sock_extended_err *see;
 	struct scm_timestamping *ts;
+	unsigned long ts_seen = 0;
 	struct cmsghdr *cmsg;
 	int i, err;
 
 	if (!opt.ts.ena)
-		return;
+		return 0;
 	msg->msg_control = cbuf;
 	msg->msg_controllen = cbuf_sz;
 
@@ -396,8 +383,11 @@ cs_read_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz)
 			printf(" %5s ts%d %lluus\n",
 			       cs_ts_info2str(see->ee_info),
 			       i, rel_time);
+			ts_seen |= 1 << see->ee_info;
 		}
 	}
+
+	return ts_seen;
 }
 
 static void ca_set_sockopts(int fd)
@@ -422,6 +412,24 @@ static void ca_set_sockopts(int fd)
 	    setsockopt(fd, SOL_SOCKET, SO_PRIORITY,
 		       &opt.sockopt.priority, sizeof(opt.sockopt.priority)))
 		error(ERN_SOCKOPT, errno, "setsockopt SO_PRIORITY");
+
+	if (opt.txtime.ena) {
+		struct sock_txtime so_txtime = {
+			.clockid = CLOCK_MONOTONIC,
+		};
+
+		if (setsockopt(fd, SOL_SOCKET, SO_TXTIME,
+			       &so_txtime, sizeof(so_txtime)))
+			error(ERN_SOCKOPT, errno, "setsockopt TXTIME");
+	}
+	if (opt.ts.ena) {
+		__u32 val = SOF_TIMESTAMPING_SOFTWARE |
+			SOF_TIMESTAMPING_OPT_TSONLY;
+
+		if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING,
+			       &val, sizeof(val)))
+			error(ERN_SOCKOPT, errno, "setsockopt TIMESTAMPING");
+	}
 }
 
 int main(int argc, char *argv[])
@@ -509,10 +517,16 @@ int main(int argc, char *argv[])
 	err = ERN_SUCCESS;
 
 	if (opt.ts.ena) {
-		/* Make sure all timestamps have time to loop back */
-		usleep(opt.txtime.delay);
+		unsigned long seen;
+		int i;
 
-		cs_read_cmsg(fd, &msg, cbuf, sizeof(cbuf));
+		/* Make sure all timestamps have time to loop back */
+		for (i = 0; i < 40; i++) {
+			seen = cs_read_cmsg(fd, &msg, cbuf, sizeof(cbuf));
+			if (seen & (1 << SCM_TSTAMP_SND))
+				break;
+			usleep(opt.txtime.delay / 20);
+		}
 	}
 
 err_out:
diff --git a/tools/testing/selftests/net/cmsg_time.sh b/tools/testing/selftests/net/cmsg_time.sh
index af85267ad1e3..1d7e756644bc 100755
--- a/tools/testing/selftests/net/cmsg_time.sh
+++ b/tools/testing/selftests/net/cmsg_time.sh
@@ -66,10 +66,13 @@ for i in "-4 $TGT4" "-6 $TGT6"; do
 		 awk '/SND/ { if ($3 > 1000) print "OK"; }')
 	check_result $? "$ts" "OK" "$prot - TXTIME abs"
 
-	ts=$(ip netns exec $NS ./cmsg_sender -p $p $i 1234 -t -d 1000 |
+	[ "$KSFT_MACHINE_SLOW" = yes ] && delay=8000 || delay=1000
+
+	ts=$(ip netns exec $NS ./cmsg_sender -p $p $i 1234 -t -d $delay |
 		 awk '/SND/ {snd=$3}
 		      /SCHED/ {sch=$3}
-		      END { if (snd - sch > 500) print "OK"; }')
+		      END { if (snd - sch > '$((delay/2))') print "OK";
+			    else print snd, "-", sch, "<", '$((delay/2))'; }')
 	check_result $? "$ts" "OK" "$prot - TXTIME rel"
     done
 done
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index 5e4390cac17e..04de7a6ba6f3 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -30,6 +30,7 @@ CONFIG_IP_GRE=m
 CONFIG_NETFILTER=y
 CONFIG_NETFILTER_ADVANCED=y
 CONFIG_NF_CONNTRACK=m
+CONFIG_IPV6_MROUTE=y
 CONFIG_IPV6_SIT=y
 CONFIG_IP_DCCP=m
 CONFIG_NF_NAT=m
diff --git a/tools/testing/selftests/net/epoll_busy_poll.c b/tools/testing/selftests/net/epoll_busy_poll.c
new file mode 100644
index 000000000000..16e457c2f877
--- /dev/null
+++ b/tools/testing/selftests/net/epoll_busy_poll.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/* Basic per-epoll context busy poll test.
+ *
+ * Only tests the ioctls, but should be expanded to test two connected hosts in
+ * the future
+ */
+
+#define _GNU_SOURCE
+
+#include <error.h>
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/capability.h>
+
+#include <sys/epoll.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+
+#include "../kselftest_harness.h"
+
+/* if the headers haven't been updated, we need to define some things */
+#if !defined(EPOLL_IOC_TYPE)
+struct epoll_params {
+	uint32_t busy_poll_usecs;
+	uint16_t busy_poll_budget;
+	uint8_t prefer_busy_poll;
+
+	/* pad the struct to a multiple of 64bits */
+	uint8_t __pad;
+};
+
+#define EPOLL_IOC_TYPE 0x8A
+#define EPIOCSPARAMS _IOW(EPOLL_IOC_TYPE, 0x01, struct epoll_params)
+#define EPIOCGPARAMS _IOR(EPOLL_IOC_TYPE, 0x02, struct epoll_params)
+#endif
+
+FIXTURE(invalid_fd)
+{
+	int invalid_fd;
+	struct epoll_params params;
+};
+
+FIXTURE_SETUP(invalid_fd)
+{
+	int ret;
+
+	ret = socket(AF_UNIX, SOCK_DGRAM, 0);
+	EXPECT_NE(-1, ret)
+		TH_LOG("error creating unix socket");
+
+	self->invalid_fd = ret;
+}
+
+FIXTURE_TEARDOWN(invalid_fd)
+{
+	int ret;
+
+	ret = close(self->invalid_fd);
+	EXPECT_EQ(0, ret);
+}
+
+TEST_F(invalid_fd, test_invalid_fd)
+{
+	int ret;
+
+	ret = ioctl(self->invalid_fd, EPIOCGPARAMS, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCGPARAMS on invalid epoll FD should error");
+
+	EXPECT_EQ(ENOTTY, errno)
+		TH_LOG("EPIOCGPARAMS on invalid epoll FD should set errno to ENOTTY");
+
+	memset(&self->params, 0, sizeof(struct epoll_params));
+
+	ret = ioctl(self->invalid_fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCSPARAMS on invalid epoll FD should error");
+
+	EXPECT_EQ(ENOTTY, errno)
+		TH_LOG("EPIOCSPARAMS on invalid epoll FD should set errno to ENOTTY");
+}
+
+FIXTURE(epoll_busy_poll)
+{
+	int fd;
+	struct epoll_params params;
+	struct epoll_params *invalid_params;
+	cap_t caps;
+};
+
+FIXTURE_SETUP(epoll_busy_poll)
+{
+	int ret;
+
+	ret = epoll_create1(0);
+	EXPECT_NE(-1, ret)
+		TH_LOG("epoll_create1 failed?");
+
+	self->fd = ret;
+
+	self->caps = cap_get_proc();
+	EXPECT_NE(NULL, self->caps);
+}
+
+FIXTURE_TEARDOWN(epoll_busy_poll)
+{
+	int ret;
+
+	ret = close(self->fd);
+	EXPECT_EQ(0, ret);
+
+	ret = cap_free(self->caps);
+	EXPECT_NE(-1, ret)
+		TH_LOG("unable to free capabilities");
+}
+
+TEST_F(epoll_busy_poll, test_get_params)
+{
+	/* begin by getting the epoll params from the kernel
+	 *
+	 * the default should be default and all fields should be zero'd by the
+	 * kernel, so set params fields to garbage to test this.
+	 */
+	int ret = 0;
+
+	self->params.busy_poll_usecs = 0xff;
+	self->params.busy_poll_budget = 0xff;
+	self->params.prefer_busy_poll = 1;
+	self->params.__pad = 0xf;
+
+	ret = ioctl(self->fd, EPIOCGPARAMS, &self->params);
+	EXPECT_EQ(0, ret)
+		TH_LOG("ioctl EPIOCGPARAMS should succeed");
+
+	EXPECT_EQ(0, self->params.busy_poll_usecs)
+		TH_LOG("EPIOCGPARAMS busy_poll_usecs should have been 0");
+
+	EXPECT_EQ(0, self->params.busy_poll_budget)
+		TH_LOG("EPIOCGPARAMS busy_poll_budget should have been 0");
+
+	EXPECT_EQ(0, self->params.prefer_busy_poll)
+		TH_LOG("EPIOCGPARAMS prefer_busy_poll should have been 0");
+
+	EXPECT_EQ(0, self->params.__pad)
+		TH_LOG("EPIOCGPARAMS __pad should have been 0");
+
+	self->invalid_params = (struct epoll_params *)0xdeadbeef;
+	ret = ioctl(self->fd, EPIOCGPARAMS, self->invalid_params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCGPARAMS should error with invalid params");
+
+	EXPECT_EQ(EFAULT, errno)
+		TH_LOG("EPIOCGPARAMS with invalid params should set errno to EFAULT");
+}
+
+TEST_F(epoll_busy_poll, test_set_invalid)
+{
+	int ret;
+
+	memset(&self->params, 0, sizeof(struct epoll_params));
+
+	self->params.__pad = 1;
+
+	ret = ioctl(self->fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCSPARAMS non-zero __pad should error");
+
+	EXPECT_EQ(EINVAL, errno)
+		TH_LOG("EPIOCSPARAMS non-zero __pad errno should be EINVAL");
+
+	self->params.__pad = 0;
+	self->params.busy_poll_usecs = (uint32_t)INT_MAX + 1;
+
+	ret = ioctl(self->fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCSPARAMS should error busy_poll_usecs > S32_MAX");
+
+	EXPECT_EQ(EINVAL, errno)
+		TH_LOG("EPIOCSPARAMS busy_poll_usecs > S32_MAX errno should be EINVAL");
+
+	self->params.__pad = 0;
+	self->params.busy_poll_usecs = 32;
+	self->params.prefer_busy_poll = 2;
+
+	ret = ioctl(self->fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCSPARAMS should error prefer_busy_poll > 1");
+
+	EXPECT_EQ(EINVAL, errno)
+		TH_LOG("EPIOCSPARAMS prefer_busy_poll > 1 errno should be EINVAL");
+
+	self->params.__pad = 0;
+	self->params.busy_poll_usecs = 32;
+	self->params.prefer_busy_poll = 1;
+
+	/* set budget well above kernel's NAPI_POLL_WEIGHT of 64 */
+	self->params.busy_poll_budget = UINT16_MAX;
+
+	/* test harness should run with CAP_NET_ADMIN, but let's make sure */
+	cap_flag_value_t tmp;
+
+	ret = cap_get_flag(self->caps, CAP_NET_ADMIN, CAP_EFFECTIVE, &tmp);
+	EXPECT_EQ(0, ret)
+		TH_LOG("unable to get CAP_NET_ADMIN cap flag");
+
+	EXPECT_EQ(CAP_SET, tmp)
+		TH_LOG("expecting CAP_NET_ADMIN to be set for the test harness");
+
+	/* at this point we know CAP_NET_ADMIN is available, so setting the
+	 * params with a busy_poll_budget > NAPI_POLL_WEIGHT should succeed
+	 */
+	ret = ioctl(self->fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(0, ret)
+		TH_LOG("EPIOCSPARAMS should allow busy_poll_budget > NAPI_POLL_WEIGHT");
+
+	/* remove CAP_NET_ADMIN from our effective set */
+	cap_value_t net_admin[] = { CAP_NET_ADMIN };
+
+	ret = cap_set_flag(self->caps, CAP_EFFECTIVE, 1, net_admin, CAP_CLEAR);
+	EXPECT_EQ(0, ret)
+		TH_LOG("couldn't clear CAP_NET_ADMIN");
+
+	ret = cap_set_proc(self->caps);
+	EXPECT_EQ(0, ret)
+		TH_LOG("cap_set_proc should drop CAP_NET_ADMIN");
+
+	/* this is now expected to fail */
+	ret = ioctl(self->fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCSPARAMS should error busy_poll_budget > NAPI_POLL_WEIGHT");
+
+	EXPECT_EQ(EPERM, errno)
+		TH_LOG("EPIOCSPARAMS errno should be EPERM busy_poll_budget > NAPI_POLL_WEIGHT");
+
+	/* restore CAP_NET_ADMIN to our effective set */
+	ret = cap_set_flag(self->caps, CAP_EFFECTIVE, 1, net_admin, CAP_SET);
+	EXPECT_EQ(0, ret)
+		TH_LOG("couldn't restore CAP_NET_ADMIN");
+
+	ret = cap_set_proc(self->caps);
+	EXPECT_EQ(0, ret)
+		TH_LOG("cap_set_proc should set  CAP_NET_ADMIN");
+
+	self->invalid_params = (struct epoll_params *)0xdeadbeef;
+	ret = ioctl(self->fd, EPIOCSPARAMS, self->invalid_params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("EPIOCSPARAMS should error when epoll_params is invalid");
+
+	EXPECT_EQ(EFAULT, errno)
+		TH_LOG("EPIOCSPARAMS should set errno to EFAULT when epoll_params is invalid");
+}
+
+TEST_F(epoll_busy_poll, test_set_and_get_valid)
+{
+	int ret;
+
+	memset(&self->params, 0, sizeof(struct epoll_params));
+
+	self->params.busy_poll_usecs = 25;
+	self->params.busy_poll_budget = 16;
+	self->params.prefer_busy_poll = 1;
+
+	ret = ioctl(self->fd, EPIOCSPARAMS, &self->params);
+
+	EXPECT_EQ(0, ret)
+		TH_LOG("EPIOCSPARAMS with valid params should not error");
+
+	/* check that the kernel returns the same values back */
+
+	memset(&self->params, 0, sizeof(struct epoll_params));
+
+	ret = ioctl(self->fd, EPIOCGPARAMS, &self->params);
+
+	EXPECT_EQ(0, ret)
+		TH_LOG("EPIOCGPARAMS should not error");
+
+	EXPECT_EQ(25, self->params.busy_poll_usecs)
+		TH_LOG("params.busy_poll_usecs incorrect");
+
+	EXPECT_EQ(16, self->params.busy_poll_budget)
+		TH_LOG("params.busy_poll_budget incorrect");
+
+	EXPECT_EQ(1, self->params.prefer_busy_poll)
+		TH_LOG("params.prefer_busy_poll incorrect");
+
+	EXPECT_EQ(0, self->params.__pad)
+		TH_LOG("params.__pad was not 0");
+}
+
+TEST_F(epoll_busy_poll, test_invalid_ioctl)
+{
+	int invalid_ioctl = EPIOCGPARAMS + 10;
+	int ret;
+
+	ret = ioctl(self->fd, invalid_ioctl, &self->params);
+
+	EXPECT_EQ(-1, ret)
+		TH_LOG("invalid ioctl should return error");
+
+	EXPECT_EQ(EINVAL, errno)
+		TH_LOG("invalid ioctl should set errno to EINVAL");
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh
index 51157a5559b7..7c01f58a20de 100755
--- a/tools/testing/selftests/net/fib_rule_tests.sh
+++ b/tools/testing/selftests/net/fib_rule_tests.sh
@@ -9,6 +9,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
 
 RTABLE=100
 RTABLE_PEER=101
+RTABLE_VRF=102
 GW_IP4=192.51.100.2
 SRC_IP=192.51.100.3
 GW_IP6=2001:db8:1::2
@@ -17,7 +18,14 @@ SRC_IP6=2001:db8:1::3
 DEV_ADDR=192.51.100.1
 DEV_ADDR6=2001:db8:1::1
 DEV=dummy0
-TESTS="fib_rule6 fib_rule4 fib_rule6_connect fib_rule4_connect"
+TESTS="
+	fib_rule6
+	fib_rule4
+	fib_rule6_connect
+	fib_rule4_connect
+	fib_rule6_vrf
+	fib_rule4_vrf
+"
 
 SELFTEST_PATH=""
 
@@ -27,13 +35,18 @@ log_test()
 	local expected=$2
 	local msg="$3"
 
+	$IP rule show | grep -q l3mdev
+	if [ $? -eq 0 ]; then
+		msg="$msg (VRF)"
+	fi
+
 	if [ ${rc} -eq ${expected} ]; then
 		nsuccess=$((nsuccess+1))
-		printf "\n    TEST: %-50s  [ OK ]\n" "${msg}"
+		printf "\n    TEST: %-60s  [ OK ]\n" "${msg}"
 	else
 		ret=1
 		nfail=$((nfail+1))
-		printf "\n    TEST: %-50s  [FAIL]\n" "${msg}"
+		printf "\n    TEST: %-60s  [FAIL]\n" "${msg}"
 		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
 			echo
 			echo "hit enter to continue, 'q' to quit"
@@ -130,6 +143,17 @@ cleanup_peer()
 	ip netns del $peerns
 }
 
+setup_vrf()
+{
+	$IP link add name vrf0 up type vrf table $RTABLE_VRF
+	$IP link set dev $DEV master vrf0
+}
+
+cleanup_vrf()
+{
+	$IP link del dev vrf0
+}
+
 fib_check_iproute_support()
 {
 	ip rule help 2>&1 | grep -q $1
@@ -248,6 +272,13 @@ fib_rule6_test()
 	fi
 }
 
+fib_rule6_vrf_test()
+{
+	setup_vrf
+	fib_rule6_test
+	cleanup_vrf
+}
+
 # Verify that the IPV6_TCLASS option of UDPv6 and TCPv6 sockets is properly
 # taken into account when connecting the socket and when sending packets.
 fib_rule6_connect_test()
@@ -385,6 +416,13 @@ fib_rule4_test()
 	fi
 }
 
+fib_rule4_vrf_test()
+{
+	setup_vrf
+	fib_rule4_test
+	cleanup_vrf
+}
+
 # Verify that the IP_TOS option of UDPv4 and TCPv4 sockets is properly taken
 # into account when connecting the socket and when sending packets.
 fib_rule4_connect_test()
@@ -467,6 +505,8 @@ do
 	fib_rule4_test|fib_rule4)		fib_rule4_test;;
 	fib_rule6_connect_test|fib_rule6_connect)	fib_rule6_connect_test;;
 	fib_rule4_connect_test|fib_rule4_connect)	fib_rule4_connect_test;;
+	fib_rule6_vrf_test|fib_rule6_vrf)	fib_rule6_vrf_test;;
+	fib_rule4_vrf_test|fib_rule4_vrf)	fib_rule4_vrf_test;;
 
 	help) echo "Test names: $TESTS"; exit 0;;
 
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 535865b3d1d6..fa7b59ff4029 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -15,18 +15,12 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \
 	bridge_vlan_unaware.sh \
 	custom_multipath_hash.sh \
 	dual_vxlan_bridge.sh \
-	ethtool_extended_state.sh \
-	ethtool_mm.sh \
-	ethtool_rmon.sh \
-	ethtool.sh \
 	gre_custom_multipath_hash.sh \
 	gre_inner_v4_multipath.sh \
 	gre_inner_v6_multipath.sh \
 	gre_multipath_nh_res.sh \
 	gre_multipath_nh.sh \
 	gre_multipath.sh \
-	hw_stats_l3.sh \
-	hw_stats_l3_gre.sh \
 	ip6_forward_instats_vrf.sh \
 	ip6gre_custom_multipath_hash.sh \
 	ip6gre_flat_key.sh \
@@ -43,8 +37,8 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \
 	ipip_hier_gre_key.sh \
 	ipip_hier_gre_keys.sh \
 	ipip_hier_gre.sh \
+	lib_sh_test.sh \
 	local_termination.sh \
-	loopback.sh \
 	mirror_gre_bound.sh \
 	mirror_gre_bridge_1d.sh \
 	mirror_gre_bridge_1d_vlan.sh \
@@ -113,7 +107,6 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \
 	vxlan_symmetric.sh
 
 TEST_FILES := devlink_lib.sh \
-	ethtool_lib.sh \
 	fib_offload_lib.sh \
 	forwarding.config.sample \
 	ip6gre_lib.sh \
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
index b8a2af8fcfb7..7fdb6a9ca543 100644
--- a/tools/testing/selftests/net/forwarding/README
+++ b/tools/testing/selftests/net/forwarding/README
@@ -56,3 +56,36 @@ o Checks shall be added to lib.sh for any external dependencies.
 o Code shall be checked using ShellCheck [1] prior to submission.
 
 1. https://www.shellcheck.net/
+
+Customization
+=============
+
+The forwarding selftests framework uses a number of variables that
+influence its behavior and tools it invokes, and how it invokes them, in
+various ways. A number of these variables can be overridden. The way these
+overridable variables are specified is typically one of the following two
+syntaxes:
+
+	: "${VARIABLE:=default_value}"
+	VARIABLE=${VARIABLE:=default_value}
+
+Any of these variables can be overridden. Notably net/forwarding/lib.sh and
+net/lib.sh contain a number of overridable variables.
+
+One way of overriding these variables is through the environment:
+
+	PAUSE_ON_FAIL=yes ./some_test.sh
+
+The variable NETIFS is special. Since it is an array variable, there is no
+way to pass it through the environment. Its value can instead be given as
+consecutive arguments to the selftest:
+
+	./some_test.sh swp{1..8}
+
+A way to customize variables in a persistent fashion is to create a file
+named forwarding.config in this directory. lib.sh sources the file if
+present, so it can contain any shell code. Typically it will contain
+assignments of variables whose value should be overridden.
+
+forwarding.config.sample is available in the directory as an example of
+how forwarding.config might look.
diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample
index 1fc4f0242fc5..f1ca95e79a65 100644
--- a/tools/testing/selftests/net/forwarding/forwarding.config.sample
+++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample
@@ -3,51 +3,28 @@
 
 ##############################################################################
 # Topology description. p1 looped back to p2, p3 to p4 and so on.
-declare -A NETIFS
 
-NETIFS[p1]=veth0
-NETIFS[p2]=veth1
-NETIFS[p3]=veth2
-NETIFS[p4]=veth3
-NETIFS[p5]=veth4
-NETIFS[p6]=veth5
-NETIFS[p7]=veth6
-NETIFS[p8]=veth7
-NETIFS[p9]=veth8
-NETIFS[p10]=veth9
+NETIFS=(
+	[p1]=veth0
+	[p2]=veth1
+	[p3]=veth2
+	[p4]=veth3
+	[p5]=veth4
+	[p6]=veth5
+	[p7]=veth6
+	[p8]=veth7
+	[p9]=veth8
+	[p10]=veth9
+)
 
 # Port that does not have a cable connected.
 NETIF_NO_CABLE=eth8
 
 ##############################################################################
-# Defines
+# In addition to the topology-related variables, it is also possible to override
+# in this file other variables that net/lib.sh, net/forwarding/lib.sh or other
+# libraries or selftests use. E.g.:
 
-# IPv4 ping utility name
-PING=ping
-# IPv6 ping utility name. Some distributions use 'ping' for IPv6.
 PING6=ping6
-# Packet generator. Some distributions use 'mz'.
 MZ=mausezahn
-# mausezahn delay between transmissions in microseconds.
-MZ_DELAY=0
-# Time to wait after interfaces participating in the test are all UP
 WAIT_TIME=5
-# Whether to pause on failure or not.
-PAUSE_ON_FAIL=no
-# Whether to pause on cleanup or not.
-PAUSE_ON_CLEANUP=no
-# Type of network interface to create
-NETIF_TYPE=veth
-# Whether to create virtual interfaces (veth) or not
-NETIF_CREATE=yes
-# Timeout (in seconds) before ping exits regardless of how many packets have
-# been sent or received
-PING_TIMEOUT=5
-# Minimum ageing_time (in centiseconds) supported by hardware
-LOW_AGEING_TIME=1000
-# Flag for tc match, supposed to be skip_sw/skip_hw which means do not process
-# filter by software/hardware
-TC_FLAG=skip_hw
-# IPv6 traceroute utility name.
-TROUTE6=traceroute6
-
diff --git a/tools/testing/selftests/net/forwarding/ipip_lib.sh b/tools/testing/selftests/net/forwarding/ipip_lib.sh
index 30f36a57bae6..01e62c4ac94d 100644
--- a/tools/testing/selftests/net/forwarding/ipip_lib.sh
+++ b/tools/testing/selftests/net/forwarding/ipip_lib.sh
@@ -141,7 +141,6 @@
 # |               $h2 +       |
 # |     192.0.2.18/28         |
 # +---------------------------+
-source lib.sh
 
 h1_create()
 {
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index e579c2e0c462..112c85c35092 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -2,33 +2,124 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ##############################################################################
+# Topology description. p1 looped back to p2, p3 to p4 and so on.
+
+declare -A NETIFS=(
+    [p1]=veth0
+    [p2]=veth1
+    [p3]=veth2
+    [p4]=veth3
+    [p5]=veth4
+    [p6]=veth5
+    [p7]=veth6
+    [p8]=veth7
+    [p9]=veth8
+    [p10]=veth9
+)
+
+# Port that does not have a cable connected.
+: "${NETIF_NO_CABLE:=eth8}"
+
+##############################################################################
 # Defines
 
-# Can be overridden by the configuration file.
-PING=${PING:=ping}
-PING6=${PING6:=ping6}
-MZ=${MZ:=mausezahn}
-MZ_DELAY=${MZ_DELAY:=0}
-ARPING=${ARPING:=arping}
-TEAMD=${TEAMD:=teamd}
-WAIT_TIME=${WAIT_TIME:=5}
-PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
-PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
-NETIF_TYPE=${NETIF_TYPE:=veth}
-NETIF_CREATE=${NETIF_CREATE:=yes}
-MCD=${MCD:=smcrouted}
-MC_CLI=${MC_CLI:=smcroutectl}
-PING_COUNT=${PING_COUNT:=10}
-PING_TIMEOUT=${PING_TIMEOUT:=5}
-WAIT_TIMEOUT=${WAIT_TIMEOUT:=20}
-INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600}
-LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000}
-REQUIRE_JQ=${REQUIRE_JQ:=yes}
-REQUIRE_MZ=${REQUIRE_MZ:=yes}
-REQUIRE_MTOOLS=${REQUIRE_MTOOLS:=no}
-STABLE_MAC_ADDRS=${STABLE_MAC_ADDRS:=no}
-TCPDUMP_EXTRA_FLAGS=${TCPDUMP_EXTRA_FLAGS:=}
-TROUTE6=${TROUTE6:=traceroute6}
+# Networking utilities.
+: "${PING:=ping}"
+: "${PING6:=ping6}"	# Some distros just use ping.
+: "${ARPING:=arping}"
+: "${TROUTE6:=traceroute6}"
+
+# Packet generator.
+: "${MZ:=mausezahn}"	# Some distributions use 'mz'.
+: "${MZ_DELAY:=0}"
+
+# Host configuration tools.
+: "${TEAMD:=teamd}"
+: "${MCD:=smcrouted}"
+: "${MC_CLI:=smcroutectl}"
+
+# Constants for netdevice bring-up:
+# Default time in seconds to wait for an interface to come up before giving up
+# and bailing out. Used during initial setup.
+: "${INTERFACE_TIMEOUT:=600}"
+# Like INTERFACE_TIMEOUT, but default for ad-hoc waiting in testing scripts.
+: "${WAIT_TIMEOUT:=20}"
+# Time to wait after interfaces participating in the test are all UP.
+: "${WAIT_TIME:=5}"
+
+# Whether to pause on, respectively, after a failure and before cleanup.
+: "${PAUSE_ON_FAIL:=no}"
+: "${PAUSE_ON_CLEANUP:=no}"
+
+# Whether to create virtual interfaces, and what netdevice type they should be.
+: "${NETIF_CREATE:=yes}"
+: "${NETIF_TYPE:=veth}"
+
+# Constants for ping tests:
+# How many packets should be sent.
+: "${PING_COUNT:=10}"
+# Timeout (in seconds) before ping exits regardless of how many packets have
+# been sent or received
+: "${PING_TIMEOUT:=5}"
+
+# Minimum ageing_time (in centiseconds) supported by hardware
+: "${LOW_AGEING_TIME:=1000}"
+
+# Whether to check for availability of certain tools.
+: "${REQUIRE_JQ:=yes}"
+: "${REQUIRE_MZ:=yes}"
+: "${REQUIRE_MTOOLS:=no}"
+
+# Whether to override MAC addresses on interfaces participating in the test.
+: "${STABLE_MAC_ADDRS:=no}"
+
+# Flags for tcpdump
+: "${TCPDUMP_EXTRA_FLAGS:=}"
+
+# Flags for TC filters.
+: "${TC_FLAG:=skip_hw}"
+
+# Whether the machine is "slow" -- i.e. might be incapable of running tests
+# involving heavy traffic. This might be the case on a debug kernel, a VM, or
+# e.g. a low-power board.
+: "${KSFT_MACHINE_SLOW:=no}"
+
+##############################################################################
+# Find netifs by test-specified driver name
+
+driver_name_get()
+{
+	local dev=$1; shift
+	local driver_path="/sys/class/net/$dev/device/driver"
+
+	if [[ -L $driver_path ]]; then
+		basename `realpath $driver_path`
+	fi
+}
+
+netif_find_driver()
+{
+	local ifnames=`ip -j link show | jq -r ".[].ifname"`
+	local count=0
+
+	for ifname in $ifnames
+	do
+		local driver_name=`driver_name_get $ifname`
+		if [[ ! -z $driver_name && $driver_name == $NETIF_FIND_DRIVER ]]; then
+			count=$((count + 1))
+			NETIFS[p$count]="$ifname"
+		fi
+	done
+}
+
+# Whether to find netdevice according to the driver speficied by the importer
+: "${NETIF_FIND_DRIVER:=}"
+
+if [[ $NETIF_FIND_DRIVER ]]; then
+	unset NETIFS
+	declare -A NETIFS
+	netif_find_driver
+fi
 
 net_forwarding_dir=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
 
@@ -41,27 +132,9 @@ source "$net_forwarding_dir/../lib.sh"
 # timeout in seconds
 slowwait()
 {
-	local timeout=$1; shift
-
-	local start_time="$(date -u +%s)"
-	while true
-	do
-		local out
-		out=$("$@")
-		local ret=$?
-		if ((!ret)); then
-			echo -n "$out"
-			return 0
-		fi
-
-		local current_time="$(date -u +%s)"
-		if ((current_time - start_time > timeout)); then
-			echo -n "$out"
-			return 1
-		fi
+	local timeout_sec=$1; shift
 
-		sleep 0.1
-	done
+	loopy_wait "sleep 0.1" "$((timeout_sec * 1000))" "$@"
 }
 
 ##############################################################################
@@ -205,22 +278,23 @@ check_port_mab_support()
 	fi
 }
 
-skip_on_veth()
+if [[ "$(id -u)" -ne 0 ]]; then
+	echo "SKIP: need root privileges"
+	exit $ksft_skip
+fi
+
+check_driver()
 {
-	local kind=$(ip -j -d link show dev ${NETIFS[p1]} |
-		jq -r '.[].linkinfo.info_kind')
+	local dev=$1; shift
+	local expected=$1; shift
+	local driver_name=`driver_name_get $dev`
 
-	if [[ $kind == veth ]]; then
-		echo "SKIP: Test cannot be run with veth pairs"
+	if [[ $driver_name != $expected ]]; then
+		echo "SKIP: expected driver $expected for $dev, got $driver_name instead"
 		exit $ksft_skip
 	fi
 }
 
-if [[ "$(id -u)" -ne 0 ]]; then
-	echo "SKIP: need root privileges"
-	exit $ksft_skip
-fi
-
 if [[ "$CHECK_TC" = "yes" ]]; then
 	check_tc_version
 fi
@@ -235,6 +309,21 @@ require_command()
 	fi
 }
 
+# IPv6 support was added in v3.0
+check_mtools_version()
+{
+	local version="$(msend -v)"
+	local major
+
+	version=${version##msend version }
+	major=$(echo $version | cut -d. -f1)
+
+	if [ $major -lt 3 ]; then
+		echo "SKIP: expected mtools version 3.0, got $version"
+		exit $ksft_skip
+	fi
+}
+
 if [[ "$REQUIRE_JQ" = "yes" ]]; then
 	require_command jq
 fi
@@ -242,15 +331,10 @@ if [[ "$REQUIRE_MZ" = "yes" ]]; then
 	require_command $MZ
 fi
 if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then
-	# https://github.com/vladimiroltean/mtools/
-	# patched for IPv6 support
+	# https://github.com/troglobit/mtools
 	require_command msend
 	require_command mreceive
-fi
-
-if [[ ! -v NUM_NETIFS ]]; then
-	echo "SKIP: importer does not define \"NUM_NETIFS\""
-	exit $ksft_skip
+	check_mtools_version
 fi
 
 ##############################################################################
@@ -271,6 +355,23 @@ done
 ##############################################################################
 # Network interfaces configuration
 
+if [[ ! -v NUM_NETIFS ]]; then
+	echo "SKIP: importer does not define \"NUM_NETIFS\""
+	exit $ksft_skip
+fi
+
+if (( NUM_NETIFS > ${#NETIFS[@]} )); then
+	echo "SKIP: Importer requires $NUM_NETIFS NETIFS, but only ${#NETIFS[@]} are defined (${NETIFS[@]})"
+	exit $ksft_skip
+fi
+
+for i in $(seq ${#NETIFS[@]}); do
+	if [[ ! ${NETIFS[p$i]} ]]; then
+		echo "SKIP: NETIFS[p$i] not given"
+		exit $ksft_skip
+	fi
+done
+
 create_netif_veth()
 {
 	local i
@@ -358,14 +459,31 @@ EXIT_STATUS=0
 # Per-test return value. Clear at the beginning of each test.
 RET=0
 
+ret_set_ksft_status()
+{
+	local ksft_status=$1; shift
+	local msg=$1; shift
+
+	RET=$(ksft_status_merge $RET $ksft_status)
+	if (( $? )); then
+		retmsg=$msg
+	fi
+}
+
+# Whether FAILs should be interpreted as XFAILs. Internal.
+FAIL_TO_XFAIL=
+
 check_err()
 {
 	local err=$1
 	local msg=$2
 
-	if [[ $RET -eq 0 && $err -ne 0 ]]; then
-		RET=$err
-		retmsg=$msg
+	if ((err)); then
+		if [[ $FAIL_TO_XFAIL = yes ]]; then
+			ret_set_ksft_status $ksft_xfail "$msg"
+		else
+			ret_set_ksft_status $ksft_fail "$msg"
+		fi
 	fi
 }
 
@@ -374,10 +492,7 @@ check_fail()
 	local err=$1
 	local msg=$2
 
-	if [[ $RET -eq 0 && $err -eq 0 ]]; then
-		RET=1
-		retmsg=$msg
-	fi
+	check_err $((!err)) "$msg"
 }
 
 check_err_fail()
@@ -393,6 +508,85 @@ check_err_fail()
 	fi
 }
 
+xfail_on_slow()
+{
+	if [[ $KSFT_MACHINE_SLOW = yes ]]; then
+		FAIL_TO_XFAIL=yes "$@"
+	else
+		"$@"
+	fi
+}
+
+xfail_on_veth()
+{
+	local dev=$1; shift
+	local kind
+
+	kind=$(ip -j -d link show dev $dev |
+			jq -r '.[].linkinfo.info_kind')
+	if [[ $kind = veth ]]; then
+		FAIL_TO_XFAIL=yes "$@"
+	else
+		"$@"
+	fi
+}
+
+log_test_result()
+{
+	local test_name=$1; shift
+	local opt_str=$1; shift
+	local result=$1; shift
+	local retmsg=$1; shift
+
+	printf "TEST: %-60s  [%s]\n" "$test_name $opt_str" "$result"
+	if [[ $retmsg ]]; then
+		printf "\t%s\n" "$retmsg"
+	fi
+}
+
+pause_on_fail()
+{
+	if [[ $PAUSE_ON_FAIL == yes ]]; then
+		echo "Hit enter to continue, 'q' to quit"
+		read a
+		[[ $a == q ]] && exit 1
+	fi
+}
+
+handle_test_result_pass()
+{
+	local test_name=$1; shift
+	local opt_str=$1; shift
+
+	log_test_result "$test_name" "$opt_str" " OK "
+}
+
+handle_test_result_fail()
+{
+	local test_name=$1; shift
+	local opt_str=$1; shift
+
+	log_test_result "$test_name" "$opt_str" FAIL "$retmsg"
+	pause_on_fail
+}
+
+handle_test_result_xfail()
+{
+	local test_name=$1; shift
+	local opt_str=$1; shift
+
+	log_test_result "$test_name" "$opt_str" XFAIL "$retmsg"
+	pause_on_fail
+}
+
+handle_test_result_skip()
+{
+	local test_name=$1; shift
+	local opt_str=$1; shift
+
+	log_test_result "$test_name" "$opt_str" SKIP "$retmsg"
+}
+
 log_test()
 {
 	local test_name=$1
@@ -402,31 +596,28 @@ log_test()
 		opt_str="($opt_str)"
 	fi
 
-	if [[ $RET -ne 0 ]]; then
-		EXIT_STATUS=1
-		printf "TEST: %-60s  [FAIL]\n" "$test_name $opt_str"
-		if [[ ! -z "$retmsg" ]]; then
-			printf "\t%s\n" "$retmsg"
-		fi
-		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
-			echo "Hit enter to continue, 'q' to quit"
-			read a
-			[ "$a" = "q" ] && exit 1
-		fi
-		return 1
+	if ((RET == ksft_pass)); then
+		handle_test_result_pass "$test_name" "$opt_str"
+	elif ((RET == ksft_xfail)); then
+		handle_test_result_xfail "$test_name" "$opt_str"
+	elif ((RET == ksft_skip)); then
+		handle_test_result_skip "$test_name" "$opt_str"
+	else
+		handle_test_result_fail "$test_name" "$opt_str"
 	fi
 
-	printf "TEST: %-60s  [ OK ]\n" "$test_name $opt_str"
-	return 0
+	EXIT_STATUS=$(ksft_exit_status_merge $EXIT_STATUS $RET)
+	return $RET
 }
 
 log_test_skip()
 {
-	local test_name=$1
-	local opt_str=$2
+	RET=$ksft_skip retmsg= log_test "$@"
+}
 
-	printf "TEST: %-60s  [SKIP]\n" "$test_name $opt_str"
-	return 0
+log_test_xfail()
+{
+	RET=$ksft_xfail retmsg= log_test "$@"
 }
 
 log_info()
@@ -562,6 +753,19 @@ setup_wait()
 	sleep $WAIT_TIME
 }
 
+wait_for_dev()
+{
+        local dev=$1; shift
+        local timeout=${1:-$WAIT_TIMEOUT}; shift
+
+        slowwait $timeout ip link show dev $dev &> /dev/null
+        if (( $? )); then
+                check_err 1
+                log_test wait_for_dev "Interface $dev did not appear."
+                exit $EXIT_STATUS
+        fi
+}
+
 cmd_jq()
 {
 	local cmd=$1
@@ -2011,6 +2215,8 @@ bail_on_lldpad()
 {
 	local reason1="$1"; shift
 	local reason2="$1"; shift
+	local caller=${FUNCNAME[1]}
+	local src=${BASH_SOURCE[1]}
 
 	if systemctl is-active --quiet lldpad; then
 
@@ -2031,7 +2237,8 @@ bail_on_lldpad()
 				an environment variable ALLOW_LLDPAD to a
 				non-empty string.
 			EOF
-			exit 1
+			log_test_skip $src:$caller
+			exit $EXIT_STATUS
 		else
 			return
 		fi
diff --git a/tools/testing/selftests/net/forwarding/lib_sh_test.sh b/tools/testing/selftests/net/forwarding/lib_sh_test.sh
new file mode 100755
index 000000000000..ff2accccaf4d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/lib_sh_test.sh
@@ -0,0 +1,208 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This tests the operation of lib.sh itself.
+
+ALL_TESTS="
+	test_ret
+	test_exit_status
+"
+NUM_NETIFS=0
+source lib.sh
+
+# Simulated checks.
+
+do_test()
+{
+	local msg=$1; shift
+
+	"$@"
+	check_err $? "$msg"
+}
+
+tpass()
+{
+	do_test "tpass" true
+}
+
+tfail()
+{
+	do_test "tfail" false
+}
+
+txfail()
+{
+	FAIL_TO_XFAIL=yes do_test "txfail" false
+}
+
+# Simulated tests.
+
+pass()
+{
+	RET=0
+	do_test "true" true
+	log_test "true"
+}
+
+fail()
+{
+	RET=0
+	do_test "false" false
+	log_test "false"
+}
+
+xfail()
+{
+	RET=0
+	FAIL_TO_XFAIL=yes do_test "xfalse" false
+	log_test "xfalse"
+}
+
+skip()
+{
+	RET=0
+	log_test_skip "skip"
+}
+
+slow_xfail()
+{
+	RET=0
+	xfail_on_slow do_test "slow_false" false
+	log_test "slow_false"
+}
+
+# lib.sh tests.
+
+ret_tests_run()
+{
+	local t
+
+	RET=0
+	retmsg=
+	for t in "$@"; do
+		$t
+	done
+	echo "$retmsg"
+	return $RET
+}
+
+ret_subtest()
+{
+	local expect_ret=$1; shift
+	local expect_retmsg=$1; shift
+	local -a tests=( "$@" )
+
+	local status_names=(pass fail xfail xpass skip)
+	local ret
+	local out
+
+	RET=0
+
+	# Run this in a subshell, so that our environment is intact.
+	out=$(ret_tests_run "${tests[@]}")
+	ret=$?
+
+	(( ret == expect_ret ))
+	check_err $? "RET=$ret expected $expect_ret"
+
+	[[ $out == $expect_retmsg ]]
+	check_err $? "retmsg=$out expected $expect_retmsg"
+
+	log_test "RET $(echo ${tests[@]}) -> ${status_names[$ret]}"
+}
+
+test_ret()
+{
+	ret_subtest $ksft_pass ""
+
+	ret_subtest $ksft_pass "" tpass
+	ret_subtest $ksft_fail "tfail" tfail
+	ret_subtest $ksft_xfail "txfail" txfail
+
+	ret_subtest $ksft_pass "" tpass tpass
+	ret_subtest $ksft_fail "tfail" tpass tfail
+	ret_subtest $ksft_xfail "txfail" tpass txfail
+
+	ret_subtest $ksft_fail "tfail" tfail tpass
+	ret_subtest $ksft_xfail "txfail" txfail tpass
+
+	ret_subtest $ksft_fail "tfail" tfail tfail
+	ret_subtest $ksft_fail "tfail" tfail txfail
+
+	ret_subtest $ksft_fail "tfail" txfail tfail
+
+	ret_subtest $ksft_xfail "txfail" txfail txfail
+}
+
+exit_status_tests_run()
+{
+	EXIT_STATUS=0
+	tests_run > /dev/null
+	return $EXIT_STATUS
+}
+
+exit_status_subtest()
+{
+	local expect_exit_status=$1; shift
+	local tests=$1; shift
+	local what=$1; shift
+
+	local status_names=(pass fail xfail xpass skip)
+	local exit_status
+	local out
+
+	RET=0
+
+	# Run this in a subshell, so that our environment is intact.
+	out=$(TESTS="$tests" exit_status_tests_run)
+	exit_status=$?
+
+	(( exit_status == expect_exit_status ))
+	check_err $? "EXIT_STATUS=$exit_status, expected $expect_exit_status"
+
+	log_test "EXIT_STATUS $tests$what -> ${status_names[$exit_status]}"
+}
+
+test_exit_status()
+{
+	exit_status_subtest $ksft_pass ":"
+
+	exit_status_subtest $ksft_pass "pass"
+	exit_status_subtest $ksft_fail "fail"
+	exit_status_subtest $ksft_pass "xfail"
+	exit_status_subtest $ksft_skip "skip"
+
+	exit_status_subtest $ksft_pass "pass pass"
+	exit_status_subtest $ksft_fail "pass fail"
+	exit_status_subtest $ksft_pass "pass xfail"
+	exit_status_subtest $ksft_skip "pass skip"
+
+	exit_status_subtest $ksft_fail "fail pass"
+	exit_status_subtest $ksft_pass "xfail pass"
+	exit_status_subtest $ksft_skip "skip pass"
+
+	exit_status_subtest $ksft_fail "fail fail"
+	exit_status_subtest $ksft_fail "fail xfail"
+	exit_status_subtest $ksft_fail "fail skip"
+
+	exit_status_subtest $ksft_fail "xfail fail"
+	exit_status_subtest $ksft_fail "skip fail"
+
+	exit_status_subtest $ksft_pass "xfail xfail"
+	exit_status_subtest $ksft_skip "xfail skip"
+	exit_status_subtest $ksft_skip "skip xfail"
+
+	exit_status_subtest $ksft_skip "skip skip"
+
+	KSFT_MACHINE_SLOW=yes \
+		exit_status_subtest $ksft_pass "slow_xfail" ": slow"
+
+	KSFT_MACHINE_SLOW=no \
+		exit_status_subtest $ksft_fail "slow_xfail" ": fast"
+}
+
+trap pre_cleanup EXIT
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
index 3f0f5dc95542..2ba44247c60a 100755
--- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
@@ -1,6 +1,41 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
+# +-------------------------+
+# |  H1                     |
+# |               $h1 +     |
+# |      192.0.2.2/24 |     |
+# |  2001:db8:1::2/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|----------------------+
+# |                   |                   R1 |
+# |             $rp11 +                      |
+# |      192.0.2.1/24                        |
+# |  2001:db8:1::1/64                        |
+# |                                          |
+# |  + $rp12              + $rp13            |
+# |  | 169.254.2.12/24    | 169.254.3.13/24  |
+# |  | fe80:2::12/64      | fe80:3::13/64    |
+# +--|--------------------|------------------+
+#    |                    |
+# +--|--------------------|------------------+
+# |  + $rp22              + $rp23            |
+# |    169.254.2.22/24      169.254.3.23/24  |
+# |    fe80:2::22/64        fe80:3::23/64    |
+# |                                          |
+# |             $rp21 +                      |
+# |   198.51.100.1/24 |                      |
+# |  2001:db8:2::1/64 |                   R2 |
+# +-------------------|----------------------+
+#                     |
+# +-------------------|-----+
+# |                   |     |
+# |               $h2 +     |
+# |   198.51.100.2/24       |
+# |  2001:db8:2::2/64    H2 |
+# +-------------------------+
+
 ALL_TESTS="
 	ping_ipv4
 	ping_ipv6
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh
index 7e7d62161c34..2903294d8bca 100644
--- a/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh
@@ -56,21 +56,12 @@ nh_stats_test_dispatch_swhw()
 	local group_id=$1; shift
 	local mz="$@"
 
-	local used
-
 	nh_stats_do_test "$what" "$nh1_id" "$nh2_id" "$group_id" \
 			 nh_stats_get "${mz[@]}"
 
-	used=$(ip -s -j -d nexthop show id $group_id |
-		   jq '.[].hw_stats.used')
-	kind=$(ip -j -d link show dev $rp11 |
-		   jq -r '.[].linkinfo.info_kind')
-	if [[ $used == true ]]; then
+	xfail_on_veth $rp11 \
 		nh_stats_do_test "HW $what" "$nh1_id" "$nh2_id" "$group_id" \
 				 nh_stats_get_hw "${mz[@]}"
-	elif [[ $kind == veth ]]; then
-		log_test_skip "HW stats not offloaded on veth topology"
-	fi
 }
 
 nh_stats_test_dispatch()
@@ -83,7 +74,6 @@ nh_stats_test_dispatch()
 	local mz="$@"
 
 	local enabled
-	local kind
 
 	if ! ip nexthop help 2>&1 | grep -q hw_stats; then
 		log_test_skip "NH stats test: ip doesn't support HW stats"
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
index 4b483d24ad00..cd9e346436fc 100755
--- a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
@@ -1,6 +1,41 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
+# +-------------------------+
+# |  H1                     |
+# |               $h1 +     |
+# |      192.0.2.2/24 |     |
+# |  2001:db8:1::2/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|----------------------+
+# |                   |                   R1 |
+# |             $rp11 +                      |
+# |      192.0.2.1/24                        |
+# |  2001:db8:1::1/64                        |
+# |                                          |
+# |  + $rp12              + $rp13            |
+# |  | 169.254.2.12/24    | 169.254.3.13/24  |
+# |  | fe80:2::12/64      | fe80:3::13/64    |
+# +--|--------------------|------------------+
+#    |                    |
+# +--|--------------------|------------------+
+# |  + $rp22              + $rp23            |
+# |    169.254.2.22/24      169.254.3.23/24  |
+# |    fe80:2::22/64        fe80:3::23/64    |
+# |                                          |
+# |             $rp21 +                      |
+# |   198.51.100.1/24 |                      |
+# |  2001:db8:2::1/64 |                   R2 |
+# +-------------------|----------------------+
+#                     |
+# +-------------------|-----+
+# |                   |     |
+# |               $h2 +     |
+# |   198.51.100.2/24       |
+# |  2001:db8:2::2/64    H2 |
+# +-------------------------+
+
 ALL_TESTS="
 	ping_ipv4
 	ping_ipv6
diff --git a/tools/testing/selftests/net/forwarding/router_nh.sh b/tools/testing/selftests/net/forwarding/router_nh.sh
index f3a53738bdcc..92904b01eae9 100755
--- a/tools/testing/selftests/net/forwarding/router_nh.sh
+++ b/tools/testing/selftests/net/forwarding/router_nh.sh
@@ -1,6 +1,20 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
+# +-------------------------+  +-------------------------+
+# | H1                      |  |                      H2 |
+# |               $h1 +     |  |               $h2 +     |
+# |      192.0.2.2/24 |     |  |   198.51.100.2/24 |     |
+# |  2001:db8:1::2/64 |     |  |  2001:db8:2::2/64 |     |
+# +-------------------|-----+  +-------------------|-----+
+#                     |                            |
+# +-------------------|----------------------------|-----+
+# | R1                |                            |     |
+# |              $rp1 +                       $rp2 +     |
+# |      192.0.2.1/24              198.51.100.1/24       |
+# |  2001:db8:1::1/64             2001:db8:2::1/64       |
+# +------------------------------------------------------+
+
 ALL_TESTS="
 	ping_ipv4
 	ping_ipv6
diff --git a/tools/testing/selftests/net/forwarding/sch_ets_tests.sh b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
index cdf689e99458..f9d26a7911bb 100644
--- a/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
+++ b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
@@ -199,25 +199,28 @@ ets_set_dwrr_two_bands()
 ets_test_strict()
 {
 	ets_set_strict
-	ets_dwrr_test_01
-	ets_dwrr_test_12
+	xfail_on_slow ets_dwrr_test_01
+	xfail_on_slow ets_dwrr_test_12
 }
 
 ets_test_mixed()
 {
 	ets_set_mixed
-	ets_dwrr_test_01
-	ets_dwrr_test_12
+	xfail_on_slow ets_dwrr_test_01
+	xfail_on_slow ets_dwrr_test_12
 }
 
 ets_test_dwrr()
 {
 	ets_set_dwrr_uniform
-	ets_dwrr_test_012
+	xfail_on_slow ets_dwrr_test_012
+
 	ets_set_dwrr_varying
-	ets_dwrr_test_012
+	xfail_on_slow ets_dwrr_test_012
+
 	ets_change_quantum
-	ets_dwrr_test_012
+	xfail_on_slow ets_dwrr_test_012
+
 	ets_set_dwrr_two_bands
-	ets_dwrr_test_01
+	xfail_on_slow ets_dwrr_test_01
 }
diff --git a/tools/testing/selftests/net/forwarding/sch_red.sh b/tools/testing/selftests/net/forwarding/sch_red.sh
index 81f31179ac88..17f28644568e 100755
--- a/tools/testing/selftests/net/forwarding/sch_red.sh
+++ b/tools/testing/selftests/net/forwarding/sch_red.sh
@@ -451,35 +451,35 @@ uninstall_qdisc()
 ecn_test()
 {
 	install_qdisc ecn
-	do_ecn_test $BACKLOG
+	xfail_on_slow do_ecn_test $BACKLOG
 	uninstall_qdisc
 }
 
 ecn_nodrop_test()
 {
 	install_qdisc ecn nodrop
-	do_ecn_nodrop_test $BACKLOG
+	xfail_on_slow do_ecn_nodrop_test $BACKLOG
 	uninstall_qdisc
 }
 
 red_test()
 {
 	install_qdisc
-	do_red_test $BACKLOG
+	xfail_on_slow do_red_test $BACKLOG
 	uninstall_qdisc
 }
 
 red_qevent_test()
 {
 	install_qdisc qevent early_drop block 10
-	do_red_qevent_test $BACKLOG
+	xfail_on_slow do_red_qevent_test $BACKLOG
 	uninstall_qdisc
 }
 
 ecn_qevent_test()
 {
 	install_qdisc ecn qevent mark block 10
-	do_ecn_qevent_test $BACKLOG
+	xfail_on_slow do_ecn_qevent_test $BACKLOG
 	uninstall_qdisc
 }
 
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_core.sh b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
index d1f26cb7cd73..9cd884d4a5de 100644
--- a/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
@@ -227,7 +227,7 @@ do_tbf_test()
 	local nr=$(rate $t2 $t3 10)
 	local nr_pct=$((100 * (nr - er) / er))
 	((-5 <= nr_pct && nr_pct <= 5))
-	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-5%."
+	xfail_on_slow check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-5%."
 
 	log_test "TC $((vlan - 10)): TBF rate ${mbit}Mbit"
 }
diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh
index bce8bb8d2b6f..2e3326edfa9a 100644
--- a/tools/testing/selftests/net/forwarding/tc_common.sh
+++ b/tools/testing/selftests/net/forwarding/tc_common.sh
@@ -4,7 +4,7 @@
 CHECK_TC="yes"
 
 # Can be overridden by the configuration file. See lib.sh
-TC_HIT_TIMEOUT=${TC_HIT_TIMEOUT:=1000} # ms
+: "${TC_HIT_TIMEOUT:=1000}" # ms
 
 tc_check_packets()
 {
diff --git a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
index 5a5dd9034819..79775b10b99f 100755
--- a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
+++ b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
@@ -1,7 +1,5 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
 
 ALL_TESTS="tunnel_key_nofrag_test"
 
diff --git a/tools/testing/selftests/net/gro.c b/tools/testing/selftests/net/gro.c
index 353e1e867fbb..b2184847e388 100644
--- a/tools/testing/selftests/net/gro.c
+++ b/tools/testing/selftests/net/gro.c
@@ -93,6 +93,7 @@ static bool tx_socket = true;
 static int tcp_offset = -1;
 static int total_hdr_len = -1;
 static int ethhdr_proto = -1;
+static const int num_flush_id_cases = 6;
 
 static void vlog(const char *fmt, ...)
 {
@@ -119,6 +120,9 @@ static void setup_sock_filter(int fd)
 		next_off = offsetof(struct ipv6hdr, nexthdr);
 	ipproto_off = ETH_HLEN + next_off;
 
+	/* Overridden later if exthdrs are used: */
+	opt_ipproto_off = ipproto_off;
+
 	if (strcmp(testname, "ip") == 0) {
 		if (proto == PF_INET)
 			optlen = sizeof(struct ip_timestamp);
@@ -617,6 +621,113 @@ static void add_ipv6_exthdr(void *buf, void *optpkt, __u8 exthdr_type, char *ext
 	iph->payload_len = htons(ntohs(iph->payload_len) + MIN_EXTHDR_SIZE);
 }
 
+static void fix_ip4_checksum(struct iphdr *iph)
+{
+	iph->check = 0;
+	iph->check = checksum_fold(iph, sizeof(struct iphdr), 0);
+}
+
+static void send_flush_id_case(int fd, struct sockaddr_ll *daddr, int tcase)
+{
+	static char buf1[MAX_HDR_LEN + PAYLOAD_LEN];
+	static char buf2[MAX_HDR_LEN + PAYLOAD_LEN];
+	static char buf3[MAX_HDR_LEN + PAYLOAD_LEN];
+	bool send_three = false;
+	struct iphdr *iph1;
+	struct iphdr *iph2;
+	struct iphdr *iph3;
+
+	iph1 = (struct iphdr *)(buf1 + ETH_HLEN);
+	iph2 = (struct iphdr *)(buf2 + ETH_HLEN);
+	iph3 = (struct iphdr *)(buf3 + ETH_HLEN);
+
+	create_packet(buf1, 0, 0, PAYLOAD_LEN, 0);
+	create_packet(buf2, PAYLOAD_LEN, 0, PAYLOAD_LEN, 0);
+	create_packet(buf3, PAYLOAD_LEN * 2, 0, PAYLOAD_LEN, 0);
+
+	switch (tcase) {
+	case 0: /* DF=1, Incrementing - should coalesce */
+		iph1->frag_off |= htons(IP_DF);
+		iph1->id = htons(8);
+
+		iph2->frag_off |= htons(IP_DF);
+		iph2->id = htons(9);
+		break;
+
+	case 1: /* DF=1, Fixed - should coalesce */
+		iph1->frag_off |= htons(IP_DF);
+		iph1->id = htons(8);
+
+		iph2->frag_off |= htons(IP_DF);
+		iph2->id = htons(8);
+		break;
+
+	case 2: /* DF=0, Incrementing - should coalesce */
+		iph1->frag_off &= ~htons(IP_DF);
+		iph1->id = htons(8);
+
+		iph2->frag_off &= ~htons(IP_DF);
+		iph2->id = htons(9);
+		break;
+
+	case 3: /* DF=0, Fixed - should not coalesce */
+		iph1->frag_off &= ~htons(IP_DF);
+		iph1->id = htons(8);
+
+		iph2->frag_off &= ~htons(IP_DF);
+		iph2->id = htons(8);
+		break;
+
+	case 4: /* DF=1, two packets incrementing, and one fixed - should
+		 * coalesce only the first two packets
+		 */
+		iph1->frag_off |= htons(IP_DF);
+		iph1->id = htons(8);
+
+		iph2->frag_off |= htons(IP_DF);
+		iph2->id = htons(9);
+
+		iph3->frag_off |= htons(IP_DF);
+		iph3->id = htons(9);
+		send_three = true;
+		break;
+
+	case 5: /* DF=1, two packets fixed, and one incrementing - should
+		 * coalesce only the first two packets
+		 */
+		iph1->frag_off |= htons(IP_DF);
+		iph1->id = htons(8);
+
+		iph2->frag_off |= htons(IP_DF);
+		iph2->id = htons(8);
+
+		iph3->frag_off |= htons(IP_DF);
+		iph3->id = htons(9);
+		send_three = true;
+		break;
+	}
+
+	fix_ip4_checksum(iph1);
+	fix_ip4_checksum(iph2);
+	write_packet(fd, buf1, total_hdr_len + PAYLOAD_LEN, daddr);
+	write_packet(fd, buf2, total_hdr_len + PAYLOAD_LEN, daddr);
+
+	if (send_three) {
+		fix_ip4_checksum(iph3);
+		write_packet(fd, buf3, total_hdr_len + PAYLOAD_LEN, daddr);
+	}
+}
+
+static void test_flush_id(int fd, struct sockaddr_ll *daddr, char *fin_pkt)
+{
+	for (int i = 0; i < num_flush_id_cases; i++) {
+		sleep(1);
+		send_flush_id_case(fd, daddr, i);
+		sleep(1);
+		write_packet(fd, fin_pkt, total_hdr_len, daddr);
+	}
+}
+
 static void send_ipv6_exthdr(int fd, struct sockaddr_ll *daddr, char *ext_data1, char *ext_data2)
 {
 	static char buf[MAX_HDR_LEN + PAYLOAD_LEN];
@@ -935,6 +1046,8 @@ static void gro_sender(void)
 			send_fragment4(txfd, &daddr);
 			sleep(1);
 			write_packet(txfd, fin_pkt, total_hdr_len, &daddr);
+
+			test_flush_id(txfd, &daddr, fin_pkt);
 		} else if (proto == PF_INET6) {
 			sleep(1);
 			send_fragment6(txfd, &daddr);
@@ -1061,6 +1174,34 @@ static void gro_receiver(void)
 
 			printf("fragmented ip4 doesn't coalesce: ");
 			check_recv_pkts(rxfd, correct_payload, 2);
+
+			/* is_atomic checks */
+			printf("DF=1, Incrementing - should coalesce: ");
+			correct_payload[0] = PAYLOAD_LEN * 2;
+			check_recv_pkts(rxfd, correct_payload, 1);
+
+			printf("DF=1, Fixed - should coalesce: ");
+			correct_payload[0] = PAYLOAD_LEN * 2;
+			check_recv_pkts(rxfd, correct_payload, 1);
+
+			printf("DF=0, Incrementing - should coalesce: ");
+			correct_payload[0] = PAYLOAD_LEN * 2;
+			check_recv_pkts(rxfd, correct_payload, 1);
+
+			printf("DF=0, Fixed - should not coalesce: ");
+			correct_payload[0] = PAYLOAD_LEN;
+			correct_payload[1] = PAYLOAD_LEN;
+			check_recv_pkts(rxfd, correct_payload, 2);
+
+			printf("DF=1, 2 Incrementing and one fixed - should coalesce only first 2 packets: ");
+			correct_payload[0] = PAYLOAD_LEN * 2;
+			correct_payload[1] = PAYLOAD_LEN;
+			check_recv_pkts(rxfd, correct_payload, 2);
+
+			printf("DF=1, 2 Fixed and one incrementing - should coalesce only first 2 packets: ");
+			correct_payload[0] = PAYLOAD_LEN * 2;
+			correct_payload[1] = PAYLOAD_LEN;
+			check_recv_pkts(rxfd, correct_payload, 2);
 		} else if (proto == PF_INET6) {
 			/* GRO doesn't check for ipv6 hop limit when flushing.
 			 * Hence no corresponding test to the ipv4 case.
diff --git a/tools/testing/selftests/net/hsr/Makefile b/tools/testing/selftests/net/hsr/Makefile
index 92c1d9d080cd..884cd2cc0681 100644
--- a/tools/testing/selftests/net/hsr/Makefile
+++ b/tools/testing/selftests/net/hsr/Makefile
@@ -2,6 +2,7 @@
 
 top_srcdir = ../../../../..
 
-TEST_PROGS := hsr_ping.sh
+TEST_PROGS := hsr_ping.sh hsr_redbox.sh
+TEST_FILES += hsr_common.sh
 
 include ../../lib.mk
diff --git a/tools/testing/selftests/net/hsr/hsr_common.sh b/tools/testing/selftests/net/hsr/hsr_common.sh
new file mode 100644
index 000000000000..8e97b1f2e7e5
--- /dev/null
+++ b/tools/testing/selftests/net/hsr/hsr_common.sh
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+# Common code for HSR testing scripts
+
+source ../lib.sh
+ret=0
+ksft_skip=4
+
+# $1: IP address
+is_v6()
+{
+	[ -z "${1##*:*}" ]
+}
+
+do_ping()
+{
+	local netns="$1"
+	local connect_addr="$2"
+	local ping_args="-q -c 2"
+
+	if is_v6 "${connect_addr}"; then
+		$ipv6 || return 0
+		ping_args="${ping_args} -6"
+	fi
+
+	ip netns exec ${netns} ping ${ping_args} $connect_addr >/dev/null
+	if [ $? -ne 0 ] ; then
+		echo "$netns -> $connect_addr connectivity [ FAIL ]" 1>&2
+		ret=1
+		return 1
+	fi
+
+	return 0
+}
+
+do_ping_long()
+{
+	local netns="$1"
+	local connect_addr="$2"
+	local ping_args="-q -c 10"
+
+	if is_v6 "${connect_addr}"; then
+		$ipv6 || return 0
+		ping_args="${ping_args} -6"
+	fi
+
+	OUT="$(LANG=C ip netns exec ${netns} ping ${ping_args} $connect_addr | grep received)"
+	if [ $? -ne 0 ] ; then
+		echo "$netns -> $connect_addr ping [ FAIL ]" 1>&2
+		ret=1
+		return 1
+	fi
+
+	VAL="$(echo $OUT | cut -d' ' -f1-8)"
+	SED_VAL="$(echo ${VAL} | sed -r -e 's/([0-9]{2}).*([0-9]{2}).*[[:space:]]([0-9]+%).*/\1 transmitted \2 received \3 loss/')"
+	if [ "${SED_VAL}" != "10 transmitted 10 received 0% loss" ]
+	then
+		echo "$netns -> $connect_addr ping TEST [ FAIL ]"
+		echo "Expect to send and receive 10 packets and no duplicates."
+		echo "Full message: ${OUT}."
+		ret=1
+		return 1
+	fi
+
+	return 0
+}
+
+stop_if_error()
+{
+	local msg="$1"
+
+	if [ ${ret} -ne 0 ]; then
+		echo "FAIL: ${msg}" 1>&2
+		exit ${ret}
+	fi
+}
+
+check_prerequisites()
+{
+	ip -Version > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run test without ip tool"
+		exit $ksft_skip
+	fi
+}
diff --git a/tools/testing/selftests/net/hsr/hsr_ping.sh b/tools/testing/selftests/net/hsr/hsr_ping.sh
index 1c6457e54625..790294c8af83 100755
--- a/tools/testing/selftests/net/hsr/hsr_ping.sh
+++ b/tools/testing/selftests/net/hsr/hsr_ping.sh
@@ -1,10 +1,10 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ret=0
-ksft_skip=4
 ipv6=true
 
+source ./hsr_common.sh
+
 optstring="h4"
 usage() {
 	echo "Usage: $0 [OPTION]"
@@ -27,88 +27,6 @@ while getopts "$optstring" option;do
 esac
 done
 
-sec=$(date +%s)
-rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
-ns1="ns1-$rndh"
-ns2="ns2-$rndh"
-ns3="ns3-$rndh"
-
-cleanup()
-{
-	local netns
-	for netns in "$ns1" "$ns2" "$ns3" ;do
-		ip netns del $netns
-	done
-}
-
-# $1: IP address
-is_v6()
-{
-	[ -z "${1##*:*}" ]
-}
-
-do_ping()
-{
-	local netns="$1"
-	local connect_addr="$2"
-	local ping_args="-q -c 2"
-
-	if is_v6 "${connect_addr}"; then
-		$ipv6 || return 0
-		ping_args="${ping_args} -6"
-	fi
-
-	ip netns exec ${netns} ping ${ping_args} $connect_addr >/dev/null
-	if [ $? -ne 0 ] ; then
-		echo "$netns -> $connect_addr connectivity [ FAIL ]" 1>&2
-		ret=1
-		return 1
-	fi
-
-	return 0
-}
-
-do_ping_long()
-{
-	local netns="$1"
-	local connect_addr="$2"
-	local ping_args="-q -c 10"
-
-	if is_v6 "${connect_addr}"; then
-		$ipv6 || return 0
-		ping_args="${ping_args} -6"
-	fi
-
-	OUT="$(LANG=C ip netns exec ${netns} ping ${ping_args} $connect_addr | grep received)"
-	if [ $? -ne 0 ] ; then
-		echo "$netns -> $connect_addr ping [ FAIL ]" 1>&2
-		ret=1
-		return 1
-	fi
-
-	VAL="$(echo $OUT | cut -d' ' -f1-8)"
-	if [ "$VAL" != "10 packets transmitted, 10 received, 0% packet loss," ]
-	then
-		echo "$netns -> $connect_addr ping TEST [ FAIL ]"
-		echo "Expect to send and receive 10 packets and no duplicates."
-		echo "Full message: ${OUT}."
-		ret=1
-		return 1
-	fi
-
-	return 0
-}
-
-stop_if_error()
-{
-	local msg="$1"
-
-	if [ ${ret} -ne 0 ]; then
-		echo "FAIL: ${msg}" 1>&2
-		exit ${ret}
-	fi
-}
-
 do_complete_ping_test()
 {
 	echo "INFO: Initial validation ping."
@@ -248,27 +166,13 @@ setup_hsr_interfaces()
 	ip -net "$ns3" link set hsr3 up
 }
 
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-trap cleanup EXIT
+check_prerequisites
+setup_ns ns1 ns2 ns3
 
-for i in "$ns1" "$ns2" "$ns3" ;do
-	ip netns add $i || exit $ksft_skip
-	ip -net $i link set lo up
-done
+trap cleanup_all_ns EXIT
 
 setup_hsr_interfaces 0
 do_complete_ping_test
-cleanup
-
-for i in "$ns1" "$ns2" "$ns3" ;do
-	ip netns add $i || exit $ksft_skip
-	ip -net $i link set lo up
-done
 
 setup_hsr_interfaces 1
 do_complete_ping_test
diff --git a/tools/testing/selftests/net/hsr/hsr_redbox.sh b/tools/testing/selftests/net/hsr/hsr_redbox.sh
new file mode 100755
index 000000000000..1f36785347c0
--- /dev/null
+++ b/tools/testing/selftests/net/hsr/hsr_redbox.sh
@@ -0,0 +1,121 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ipv6=false
+
+source ./hsr_common.sh
+
+do_complete_ping_test()
+{
+	echo "INFO: Initial validation ping (HSR-SAN/RedBox)."
+	# Each node has to be able to reach each one.
+	do_ping "${ns1}" 100.64.0.2
+	do_ping "${ns2}" 100.64.0.1
+	# Ping between SANs (test bridge)
+	do_ping "${ns4}" 100.64.0.51
+	do_ping "${ns5}" 100.64.0.41
+	# Ping from SANs to hsr1 (via hsr2) (and opposite)
+	do_ping "${ns3}" 100.64.0.1
+	do_ping "${ns1}" 100.64.0.3
+	do_ping "${ns1}" 100.64.0.41
+	do_ping "${ns4}" 100.64.0.1
+	do_ping "${ns1}" 100.64.0.51
+	do_ping "${ns5}" 100.64.0.1
+	stop_if_error "Initial validation failed."
+
+	# Wait for MGNT HSR frames being received and nodes being
+	# merged.
+	sleep 5
+
+	echo "INFO: Longer ping test (HSR-SAN/RedBox)."
+	# Ping from SAN to hsr1 (via hsr2)
+	do_ping_long "${ns3}" 100.64.0.1
+	# Ping from hsr1 (via hsr2) to SANs (and opposite)
+	do_ping_long "${ns1}" 100.64.0.3
+	do_ping_long "${ns1}" 100.64.0.41
+	do_ping_long "${ns4}" 100.64.0.1
+	do_ping_long "${ns1}" 100.64.0.51
+	do_ping_long "${ns5}" 100.64.0.1
+	stop_if_error "Longer ping test failed."
+
+	echo "INFO: All good."
+}
+
+setup_hsr_interfaces()
+{
+	local HSRv="$1"
+
+	echo "INFO: preparing interfaces for HSRv${HSRv} (HSR-SAN/RedBox)."
+#
+# IPv4 addresses (100.64.X.Y/24), and [X.Y] is presented on below diagram:
+#
+#
+# |NS1                     |               |NS4                |
+# |       [0.1]            |               |                   |
+# |    /-- hsr1 --\        |               |    [0.41]         |
+# | ns1eth1     ns1eth2    |               |    ns4eth1 (SAN)  |
+# |------------------------|               |-------------------|
+#      |            |                                |
+#      |            |                                |
+#      |            |                                |
+# |------------------------|   |-------------------------------|
+# | ns2eth1     ns2eth2    |   |                  ns3eth2      |
+# |    \-- hsr2 --/        |   |                 /             |
+# |      [0.2] \           |   |                /              |  |------------|
+# |             ns2eth3    |---| ns3eth1 -- ns3br1 -- ns3eth3--|--| ns5eth1    |
+# |             (interlink)|   | [0.3]      [0.11]             |  | [0.51]     |
+# |NS2 (RedBOX)            |   |NS3 (BR)                       |  | NS5 (SAN)  |
+#
+#
+	# Check if iproute2 supports adding interlink port to hsrX device
+	ip link help hsr | grep -q INTERLINK
+	[ $? -ne 0 ] && { echo "iproute2: HSR interlink interface not supported!"; exit 0; }
+
+	# Create interfaces for name spaces
+	ip link add ns1eth1 netns "${ns1}" type veth peer name ns2eth1 netns "${ns2}"
+	ip link add ns1eth2 netns "${ns1}" type veth peer name ns2eth2 netns "${ns2}"
+	ip link add ns2eth3 netns "${ns2}" type veth peer name ns3eth1 netns "${ns3}"
+	ip link add ns3eth2 netns "${ns3}" type veth peer name ns4eth1 netns "${ns4}"
+	ip link add ns3eth3 netns "${ns3}" type veth peer name ns5eth1 netns "${ns5}"
+
+	sleep 1
+
+	ip -n "${ns1}" link set ns1eth1 up
+	ip -n "${ns1}" link set ns1eth2 up
+
+	ip -n "${ns2}" link set ns2eth1 up
+	ip -n "${ns2}" link set ns2eth2 up
+	ip -n "${ns2}" link set ns2eth3 up
+
+	ip -n "${ns3}" link add name ns3br1 type bridge
+	ip -n "${ns3}" link set ns3br1 up
+	ip -n "${ns3}" link set ns3eth1 master ns3br1 up
+	ip -n "${ns3}" link set ns3eth2 master ns3br1 up
+	ip -n "${ns3}" link set ns3eth3 master ns3br1 up
+
+	ip -n "${ns4}" link set ns4eth1 up
+	ip -n "${ns5}" link set ns5eth1 up
+
+	ip -net "${ns1}" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version ${HSRv} proto 0
+	ip -net "${ns2}" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 interlink ns2eth3 supervision 45 version ${HSRv} proto 0
+
+	ip -n "${ns1}" addr add 100.64.0.1/24 dev hsr1
+	ip -n "${ns2}" addr add 100.64.0.2/24 dev hsr2
+	ip -n "${ns3}" addr add 100.64.0.11/24 dev ns3br1
+	ip -n "${ns3}" addr add 100.64.0.3/24 dev ns3eth1
+	ip -n "${ns4}" addr add 100.64.0.41/24 dev ns4eth1
+	ip -n "${ns5}" addr add 100.64.0.51/24 dev ns5eth1
+
+	ip -n "${ns1}" link set hsr1 up
+	ip -n "${ns2}" link set hsr2 up
+}
+
+check_prerequisites
+setup_ns ns1 ns2 ns3 ns4 ns5
+
+trap cleanup_all_ns EXIT
+
+setup_hsr_interfaces 1
+do_complete_ping_test
+
+exit $ret
diff --git a/tools/testing/selftests/net/ip_local_port_range.c b/tools/testing/selftests/net/ip_local_port_range.c
index 193b82745fd8..29451d2244b7 100644
--- a/tools/testing/selftests/net/ip_local_port_range.c
+++ b/tools/testing/selftests/net/ip_local_port_range.c
@@ -359,7 +359,7 @@ TEST_F(ip_local_port_range, late_bind)
 		struct sockaddr_in v4;
 		struct sockaddr_in6 v6;
 	} addr;
-	socklen_t addr_len;
+	socklen_t addr_len = 0;
 	const int one = 1;
 	int fd, err;
 	__u32 range;
diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh
index f9fe182dfbd4..c868c0aec121 100644
--- a/tools/testing/selftests/net/lib.sh
+++ b/tools/testing/selftests/net/lib.sh
@@ -4,19 +4,64 @@
 ##############################################################################
 # Defines
 
-WAIT_TIMEOUT=${WAIT_TIMEOUT:=20}
+: "${WAIT_TIMEOUT:=20}"
+
 BUSYWAIT_TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms
 
-# Kselftest framework requirement - SKIP code is 4.
+# Kselftest framework constants.
+ksft_pass=0
+ksft_fail=1
+ksft_xfail=2
 ksft_skip=4
+
 # namespace list created by setup_ns
 NS_LIST=""
 
 ##############################################################################
 # Helpers
-busywait()
+
+__ksft_status_merge()
 {
-	local timeout=$1; shift
+	local a=$1; shift
+	local b=$1; shift
+	local -A weights
+	local weight=0
+
+	for i in "$@"; do
+		weights[$i]=$((weight++))
+	done
+
+	if [[ ${weights[$a]} > ${weights[$b]} ]]; then
+		echo "$a"
+		return 0
+	else
+		echo "$b"
+		return 1
+	fi
+}
+
+ksft_status_merge()
+{
+	local a=$1; shift
+	local b=$1; shift
+
+	__ksft_status_merge "$a" "$b" \
+		$ksft_pass $ksft_xfail $ksft_skip $ksft_fail
+}
+
+ksft_exit_status_merge()
+{
+	local a=$1; shift
+	local b=$1; shift
+
+	__ksft_status_merge "$a" "$b" \
+		$ksft_xfail $ksft_pass $ksft_skip $ksft_fail
+}
+
+loopy_wait()
+{
+	local sleep_cmd=$1; shift
+	local timeout_ms=$1; shift
 
 	local start_time="$(date -u +%s%3N)"
 	while true
@@ -30,13 +75,22 @@ busywait()
 		fi
 
 		local current_time="$(date -u +%s%3N)"
-		if ((current_time - start_time > timeout)); then
+		if ((current_time - start_time > timeout_ms)); then
 			echo -n "$out"
 			return 1
 		fi
+
+		$sleep_cmd
 	done
 }
 
+busywait()
+{
+	local timeout_ms=$1; shift
+
+	loopy_wait : "$timeout_ms" "$@"
+}
+
 cleanup_ns()
 {
 	local ns=""
diff --git a/tools/testing/selftests/net/lib/.gitignore b/tools/testing/selftests/net/lib/.gitignore
new file mode 100644
index 000000000000..1ebc6187f421
--- /dev/null
+++ b/tools/testing/selftests/net/lib/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+csum
diff --git a/tools/testing/selftests/net/lib/Makefile b/tools/testing/selftests/net/lib/Makefile
new file mode 100644
index 000000000000..82c3264b115e
--- /dev/null
+++ b/tools/testing/selftests/net/lib/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+
+CFLAGS =  -Wall -Wl,--no-as-needed -O2 -g
+CFLAGS += -I../../../../../usr/include/ $(KHDR_INCLUDES)
+# Additional include paths needed by kselftest.h
+CFLAGS += -I../../
+
+TEST_FILES := ../../../../../Documentation/netlink/specs
+TEST_FILES += ../../../../net/ynl
+
+TEST_GEN_FILES += csum
+
+TEST_INCLUDES := $(wildcard py/*.py)
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/net/csum.c b/tools/testing/selftests/net/lib/csum.c
index 90eb06fefa59..b9f3fc3c3426 100644
--- a/tools/testing/selftests/net/csum.c
+++ b/tools/testing/selftests/net/lib/csum.c
@@ -682,7 +682,7 @@ static int recv_verify_packet_ipv6(void *nh, int len)
 }
 
 /* return whether auxdata includes TP_STATUS_CSUM_VALID */
-static bool recv_verify_packet_csum(struct msghdr *msg)
+static uint32_t recv_get_packet_csum_status(struct msghdr *msg)
 {
 	struct tpacket_auxdata *aux = NULL;
 	struct cmsghdr *cm;
@@ -706,7 +706,7 @@ static bool recv_verify_packet_csum(struct msghdr *msg)
 	if (!aux)
 		error(1, 0, "cmsg: no auxdata");
 
-	return aux->tp_status & TP_STATUS_CSUM_VALID;
+	return aux->tp_status;
 }
 
 static int recv_packet(int fd)
@@ -716,6 +716,7 @@ static int recv_packet(int fd)
 	char ctrl[CMSG_SPACE(sizeof(struct tpacket_auxdata))];
 	struct pkt *buf = (void *)_buf;
 	struct msghdr msg = {0};
+	uint32_t tp_status;
 	struct iovec iov;
 	int len, ret;
 
@@ -737,6 +738,17 @@ static int recv_packet(int fd)
 		if (len == -1)
 			error(1, errno, "recv p");
 
+		tp_status = recv_get_packet_csum_status(&msg);
+
+		/* GRO might coalesce randomized packets. Such GSO packets are
+		 * then reinitialized for csum offload (CHECKSUM_PARTIAL), with
+		 * a pseudo csum. Do not try to validate these checksums.
+		 */
+		if (tp_status & TP_STATUS_CSUMNOTREADY) {
+			fprintf(stderr, "cmsg: GSO packet has partial csum: skip\n");
+			continue;
+		}
+
 		if (cfg_family == PF_INET6)
 			ret = recv_verify_packet_ipv6(buf, len);
 		else
@@ -753,7 +765,7 @@ static int recv_packet(int fd)
 		 * Do not fail if kernel does not validate a good csum:
 		 * Absence of validation does not imply invalid.
 		 */
-		if (recv_verify_packet_csum(&msg) && cfg_bad_csum) {
+		if (tp_status & TP_STATUS_CSUM_VALID && cfg_bad_csum) {
 			fprintf(stderr, "cmsg: expected bad csum, pf_packet returns valid\n");
 			bad_validations++;
 		}
diff --git a/tools/testing/selftests/net/lib/py/__init__.py b/tools/testing/selftests/net/lib/py/__init__.py
new file mode 100644
index 000000000000..b6d498d125fe
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/__init__.py
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+
+from .consts import KSRC
+from .ksft import *
+from .netns import NetNS
+from .nsim import *
+from .utils import *
+from .ynl import NlError, YnlFamily, EthtoolFamily, NetdevFamily, RtnlFamily
diff --git a/tools/testing/selftests/net/lib/py/consts.py b/tools/testing/selftests/net/lib/py/consts.py
new file mode 100644
index 000000000000..f518ce79d82c
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/consts.py
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import sys
+from pathlib import Path
+
+KSFT_DIR = (Path(__file__).parent / "../../..").resolve()
+KSRC = (Path(__file__).parent / "../../../../../..").resolve()
+
+KSFT_MAIN_NAME = Path(sys.argv[0]).with_suffix("").name
diff --git a/tools/testing/selftests/net/lib/py/ksft.py b/tools/testing/selftests/net/lib/py/ksft.py
new file mode 100644
index 000000000000..4769b4eb1ea1
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/ksft.py
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import builtins
+import inspect
+import sys
+import time
+import traceback
+from .consts import KSFT_MAIN_NAME
+
+KSFT_RESULT = None
+KSFT_RESULT_ALL = True
+
+
+class KsftFailEx(Exception):
+    pass
+
+
+class KsftSkipEx(Exception):
+    pass
+
+
+class KsftXfailEx(Exception):
+    pass
+
+
+def ksft_pr(*objs, **kwargs):
+    print("#", *objs, **kwargs)
+
+
+def _fail(*args):
+    global KSFT_RESULT
+    KSFT_RESULT = False
+
+    frame = inspect.stack()[2]
+    ksft_pr("At " + frame.filename + " line " + str(frame.lineno) + ":")
+    ksft_pr(*args)
+
+
+def ksft_eq(a, b, comment=""):
+    global KSFT_RESULT
+    if a != b:
+        _fail("Check failed", a, "!=", b, comment)
+
+
+def ksft_true(a, comment=""):
+    if not a:
+        _fail("Check failed", a, "does not eval to True", comment)
+
+
+def ksft_in(a, b, comment=""):
+    if a not in b:
+        _fail("Check failed", a, "not in", b, comment)
+
+
+def ksft_ge(a, b, comment=""):
+    if a < b:
+        _fail("Check failed", a, "<", b, comment)
+
+
+class ksft_raises:
+    def __init__(self, expected_type):
+        self.exception = None
+        self.expected_type = expected_type
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        if exc_type is None:
+            _fail(f"Expected exception {str(self.expected_type.__name__)}, none raised")
+        elif self.expected_type != exc_type:
+            _fail(f"Expected exception {str(self.expected_type.__name__)}, raised {str(exc_type.__name__)}")
+        self.exception = exc_val
+        # Suppress the exception if its the expected one
+        return self.expected_type == exc_type
+
+
+def ksft_busy_wait(cond, sleep=0.005, deadline=1, comment=""):
+    end = time.monotonic() + deadline
+    while True:
+        if cond():
+            return
+        if time.monotonic() > end:
+            _fail("Waiting for condition timed out", comment)
+            return
+        time.sleep(sleep)
+
+
+def ktap_result(ok, cnt=1, case="", comment=""):
+    global KSFT_RESULT_ALL
+    KSFT_RESULT_ALL = KSFT_RESULT_ALL and ok
+
+    res = ""
+    if not ok:
+        res += "not "
+    res += "ok "
+    res += str(cnt) + " "
+    res += KSFT_MAIN_NAME
+    if case:
+        res += "." + str(case.__name__)
+    if comment:
+        res += " # " + comment
+    print(res)
+
+
+def ksft_run(cases=None, globs=None, case_pfx=None, args=()):
+    cases = cases or []
+
+    if globs and case_pfx:
+        for key, value in globs.items():
+            if not callable(value):
+                continue
+            for prefix in case_pfx:
+                if key.startswith(prefix):
+                    cases.append(value)
+                    break
+
+    totals = {"pass": 0, "fail": 0, "skip": 0, "xfail": 0}
+
+    print("KTAP version 1")
+    print("1.." + str(len(cases)))
+
+    global KSFT_RESULT
+    cnt = 0
+    for case in cases:
+        KSFT_RESULT = True
+        cnt += 1
+        try:
+            case(*args)
+        except KsftSkipEx as e:
+            ktap_result(True, cnt, case, comment="SKIP " + str(e))
+            totals['skip'] += 1
+            continue
+        except KsftXfailEx as e:
+            ktap_result(True, cnt, case, comment="XFAIL " + str(e))
+            totals['xfail'] += 1
+            continue
+        except Exception as e:
+            tb = traceback.format_exc()
+            for line in tb.strip().split('\n'):
+                ksft_pr("Exception|", line)
+            ktap_result(False, cnt, case)
+            totals['fail'] += 1
+            continue
+
+        ktap_result(KSFT_RESULT, cnt, case)
+        if KSFT_RESULT:
+            totals['pass'] += 1
+        else:
+            totals['fail'] += 1
+
+    print(
+        f"# Totals: pass:{totals['pass']} fail:{totals['fail']} xfail:{totals['xfail']} xpass:0 skip:{totals['skip']} error:0"
+    )
+
+
+def ksft_exit():
+    global KSFT_RESULT_ALL
+    sys.exit(0 if KSFT_RESULT_ALL else 1)
diff --git a/tools/testing/selftests/net/lib/py/netns.py b/tools/testing/selftests/net/lib/py/netns.py
new file mode 100644
index 000000000000..ecff85f9074f
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/netns.py
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+
+from .utils import ip
+import random
+import string
+
+
+class NetNS:
+    def __init__(self, name=None):
+        if name:
+            self.name = name
+        else:
+            self.name = ''.join(random.choice(string.ascii_lowercase) for _ in range(8))
+        ip('netns add ' + self.name)
+
+    def __del__(self):
+        if self.name:
+            ip('netns del ' + self.name)
+            self.name = None
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        self.__del__()
+
+    def __str__(self):
+        return self.name
+
+    def __repr__(self):
+        return f"NetNS({self.name})"
diff --git a/tools/testing/selftests/net/lib/py/nsim.py b/tools/testing/selftests/net/lib/py/nsim.py
new file mode 100644
index 000000000000..f571a8b3139b
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/nsim.py
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import json
+import os
+import random
+import re
+import time
+from .utils import cmd, ip
+
+
+class NetdevSim:
+    """
+    Class for netdevsim netdevice and its attributes.
+    """
+
+    def __init__(self, nsimdev, port_index, ifname, ns=None):
+        # In case udev renamed the netdev to according to new schema,
+        # check if the name matches the port_index.
+        nsimnamere = re.compile(r"eni\d+np(\d+)")
+        match = nsimnamere.match(ifname)
+        if match and int(match.groups()[0]) != port_index + 1:
+            raise Exception("netdevice name mismatches the expected one")
+
+        self.ifname = ifname
+        self.nsimdev = nsimdev
+        self.port_index = port_index
+        self.ns = ns
+        self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index)
+        ret = ip("-j link show dev %s" % ifname, ns=ns)
+        self.dev = json.loads(ret.stdout)[0]
+        self.ifindex = self.dev["ifindex"]
+
+    def dfs_write(self, path, val):
+        self.nsimdev.dfs_write(f'ports/{self.port_index}/' + path, val)
+
+
+class NetdevSimDev:
+    """
+    Class for netdevsim bus device and its attributes.
+    """
+    @staticmethod
+    def ctrl_write(path, val):
+        fullpath = os.path.join("/sys/bus/netdevsim/", path)
+        with open(fullpath, "w") as f:
+            f.write(val)
+
+    def dfs_write(self, path, val):
+        fullpath = os.path.join(f"/sys/kernel/debug/netdevsim/netdevsim{self.addr}/", path)
+        with open(fullpath, "w") as f:
+            f.write(val)
+
+    def __init__(self, port_count=1, queue_count=1, ns=None):
+        # nsim will spawn in init_net, we'll set to actual ns once we switch it there
+        self.ns = None
+
+        if not os.path.exists("/sys/bus/netdevsim"):
+            cmd("modprobe netdevsim")
+
+        addr = random.randrange(1 << 15)
+        while True:
+            try:
+                self.ctrl_write("new_device", "%u %u %u" % (addr, port_count, queue_count))
+            except OSError as e:
+                if e.errno == errno.ENOSPC:
+                    addr = random.randrange(1 << 15)
+                    continue
+                raise e
+            break
+        self.addr = addr
+
+        # As probe of netdevsim device might happen from a workqueue,
+        # so wait here until all netdevs appear.
+        self.wait_for_netdevs(port_count)
+
+        if ns:
+            cmd(f"devlink dev reload netdevsim/netdevsim{addr} netns {ns.name}")
+            self.ns = ns
+
+        cmd("udevadm settle", ns=self.ns)
+        ifnames = self.get_ifnames()
+
+        self.dfs_dir = "/sys/kernel/debug/netdevsim/netdevsim%u/" % addr
+
+        self.nsims = []
+        for port_index in range(port_count):
+            self.nsims.append(self._make_port(port_index, ifnames[port_index]))
+
+        self.removed = False
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        """
+        __exit__ gets called at the end of a "with" block.
+        """
+        self.remove()
+
+    def _make_port(self, port_index, ifname):
+        return NetdevSim(self, port_index, ifname, self.ns)
+
+    def get_ifnames(self):
+        ifnames = []
+        listdir = cmd(f"ls /sys/bus/netdevsim/devices/netdevsim{self.addr}/net/",
+                      ns=self.ns).stdout.split()
+        for ifname in listdir:
+            ifnames.append(ifname)
+        ifnames.sort()
+        return ifnames
+
+    def wait_for_netdevs(self, port_count):
+        timeout = 5
+        timeout_start = time.time()
+
+        while True:
+            try:
+                ifnames = self.get_ifnames()
+            except FileNotFoundError as e:
+                ifnames = []
+            if len(ifnames) == port_count:
+                break
+            if time.time() < timeout_start + timeout:
+                continue
+            raise Exception("netdevices did not appear within timeout")
+
+    def remove(self):
+        if not self.removed:
+            self.ctrl_write("del_device", "%u" % (self.addr, ))
+            self.removed = True
+
+    def remove_nsim(self, nsim):
+        self.nsims.remove(nsim)
+        self.ctrl_write("devices/netdevsim%u/del_port" % (self.addr, ),
+                        "%u" % (nsim.port_index, ))
diff --git a/tools/testing/selftests/net/lib/py/utils.py b/tools/testing/selftests/net/lib/py/utils.py
new file mode 100644
index 000000000000..0540ea24921d
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/utils.py
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import json as _json
+import random
+import re
+import subprocess
+import time
+
+
+class cmd:
+    def __init__(self, comm, shell=True, fail=True, ns=None, background=False, host=None, timeout=5):
+        if ns:
+            comm = f'ip netns exec {ns} ' + comm
+
+        self.stdout = None
+        self.stderr = None
+        self.ret = None
+
+        self.comm = comm
+        if host:
+            self.proc = host.cmd(comm)
+        else:
+            self.proc = subprocess.Popen(comm, shell=shell, stdout=subprocess.PIPE,
+                                         stderr=subprocess.PIPE)
+        if not background:
+            self.process(terminate=False, fail=fail, timeout=timeout)
+
+    def process(self, terminate=True, fail=None, timeout=5):
+        if fail is None:
+            fail = not terminate
+
+        if terminate:
+            self.proc.terminate()
+        stdout, stderr = self.proc.communicate(timeout)
+        self.stdout = stdout.decode("utf-8")
+        self.stderr = stderr.decode("utf-8")
+        self.proc.stdout.close()
+        self.proc.stderr.close()
+        self.ret = self.proc.returncode
+
+        if self.proc.returncode != 0 and fail:
+            if len(stderr) > 0 and stderr[-1] == "\n":
+                stderr = stderr[:-1]
+            raise Exception("Command failed: %s\nSTDOUT: %s\nSTDERR: %s" %
+                            (self.proc.args, stdout, stderr))
+
+
+class bkg(cmd):
+    def __init__(self, comm, shell=True, fail=None, ns=None, host=None,
+                 exit_wait=False):
+        super().__init__(comm, background=True,
+                         shell=shell, fail=fail, ns=ns, host=host)
+        self.terminate = not exit_wait
+        self.check_fail = fail
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        return self.process(terminate=self.terminate, fail=self.check_fail)
+
+
+def tool(name, args, json=None, ns=None, host=None):
+    cmd_str = name + ' '
+    if json:
+        cmd_str += '--json '
+    cmd_str += args
+    cmd_obj = cmd(cmd_str, ns=ns, host=host)
+    if json:
+        return _json.loads(cmd_obj.stdout)
+    return cmd_obj
+
+
+def ip(args, json=None, ns=None, host=None):
+    if ns:
+        args = f'-netns {ns} ' + args
+    return tool('ip', args, json=json, host=host)
+
+
+def rand_port():
+    """
+    Get unprivileged port, for now just random, one day we may decide to check if used.
+    """
+    return random.randint(10000, 65535)
+
+
+def wait_port_listen(port, proto="tcp", ns=None, host=None, sleep=0.005, deadline=5):
+    end = time.monotonic() + deadline
+
+    pattern = f":{port:04X} .* "
+    if proto == "tcp": # for tcp protocol additionally check the socket state
+        pattern += "0A"
+    pattern = re.compile(pattern)
+
+    while True:
+        data = cmd(f'cat /proc/net/{proto}*', ns=ns, host=host, shell=True).stdout
+        for row in data.split("\n"):
+            if pattern.search(row):
+                return
+        if time.monotonic() > end:
+            raise Exception("Waiting for port listen timed out")
+        time.sleep(sleep)
diff --git a/tools/testing/selftests/net/lib/py/ynl.py b/tools/testing/selftests/net/lib/py/ynl.py
new file mode 100644
index 000000000000..1ace58370c06
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/ynl.py
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+
+import sys
+from pathlib import Path
+from .consts import KSRC, KSFT_DIR
+from .ksft import ksft_pr, ktap_result
+
+# Resolve paths
+try:
+    if (KSFT_DIR / "kselftest-list.txt").exists():
+        # Running in "installed" selftests
+        tools_full_path = KSFT_DIR
+        SPEC_PATH = KSFT_DIR / "net/lib/specs"
+
+        sys.path.append(tools_full_path.as_posix())
+        from net.lib.ynl.lib import YnlFamily, NlError
+    else:
+        # Running in tree
+        tools_full_path = KSRC / "tools"
+        SPEC_PATH = KSRC / "Documentation/netlink/specs"
+
+        sys.path.append(tools_full_path.as_posix())
+        from net.ynl.lib import YnlFamily, NlError
+except ModuleNotFoundError as e:
+    ksft_pr("Failed importing `ynl` library from kernel sources")
+    ksft_pr(str(e))
+    ktap_result(True, comment="SKIP")
+    sys.exit(4)
+
+#
+# Wrapper classes, loading the right specs
+# Set schema='' to avoid jsonschema validation, it's slow
+#
+class EthtoolFamily(YnlFamily):
+    def __init__(self):
+        super().__init__((SPEC_PATH / Path('ethtool.yaml')).as_posix(),
+                         schema='')
+
+
+class RtnlFamily(YnlFamily):
+    def __init__(self):
+        super().__init__((SPEC_PATH / Path('rt_link.yaml')).as_posix(),
+                         schema='')
+
+
+class NetdevFamily(YnlFamily):
+    def __init__(self):
+        super().__init__((SPEC_PATH / Path('netdev.yaml')).as_posix(),
+                         schema='')
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index bc97ab33a00e..776d43a6922d 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -200,6 +200,58 @@ chk_msk_cestab()
 		 "${expected}" "${msg}" ""
 }
 
+msk_info_get_value()
+{
+	local port="${1}"
+	local info="${2}"
+
+	ss -N "${ns}" -inHM dport "${port}" | \
+		mptcp_lib_get_info_value "${info}" "${info}"
+}
+
+chk_msk_info()
+{
+	local port="${1}"
+	local info="${2}"
+	local cnt="${3}"
+	local msg="....chk ${info}"
+	local delta_ms=250  # half what we waited before, just to be sure
+	local now
+
+	now=$(msk_info_get_value "${port}" "${info}")
+
+	mptcp_lib_print_title "${msg}"
+	if { [ -z "${cnt}" ] || [ -z "${now}" ]; } &&
+	   ! mptcp_lib_expect_all_features; then
+		mptcp_lib_pr_skip "Feature probably not supported"
+		mptcp_lib_result_skip "${msg}"
+	elif [ "$((cnt + delta_ms))" -lt "${now}" ]; then
+		mptcp_lib_pr_ok
+		mptcp_lib_result_pass "${msg}"
+	else
+		mptcp_lib_pr_fail "value of ${info} changed by $((now - cnt))ms," \
+				  "expected at least ${delta_ms}ms"
+		mptcp_lib_result_fail "${msg}"
+		ret=${KSFT_FAIL}
+	fi
+}
+
+chk_last_time_info()
+{
+	local port="${1}"
+	local data_sent data_recv ack_recv
+
+	data_sent=$(msk_info_get_value "${port}" "last_data_sent")
+	data_recv=$(msk_info_get_value "${port}" "last_data_recv")
+	ack_recv=$(msk_info_get_value "${port}" "last_ack_recv")
+
+	sleep 0.5  # wait to check after if the timestamps difference
+
+	chk_msk_info "${port}" "last_data_sent" "${data_sent}"
+	chk_msk_info "${port}" "last_data_recv" "${data_recv}"
+	chk_msk_info "${port}" "last_ack_recv" "${ack_recv}"
+}
+
 wait_connected()
 {
 	local listener_ns="${1}"
@@ -233,6 +285,7 @@ echo "b" | \
 				127.0.0.1 >/dev/null &
 wait_connected $ns 10000
 chk_msk_nr 2 "after MPC handshake "
+chk_last_time_info 10000
 chk_msk_remote_key_nr 2 "....chk remote_key"
 chk_msk_fallback_nr 0 "....chk no fallback"
 chk_msk_inuse 2
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index 4131f3263a48..b77fb7065bfb 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -147,7 +147,7 @@ cleanup()
 
 mptcp_lib_check_mptcp
 mptcp_lib_check_kallsyms
-mptcp_lib_check_tools ip
+mptcp_lib_check_tools ip tc
 
 sin=$(mktemp)
 sout=$(mktemp)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index e4403236f655..fefa9173bdaa 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -31,7 +31,6 @@ timeout_poll=30
 timeout_test=$((timeout_poll * 2 + 1))
 capture=false
 checksum=false
-ip_mptcp=0
 check_invert=0
 validate_checksum=false
 init=0
@@ -125,8 +124,8 @@ init_shapers()
 {
 	local i
 	for i in $(seq 1 4); do
-		tc -n $ns1 qdisc add dev ns1eth$i root netem rate 20mbit delay 1
-		tc -n $ns2 qdisc add dev ns2eth$i root netem rate 20mbit delay 1
+		tc -n $ns1 qdisc add dev ns1eth$i root netem rate 20mbit delay 1ms
+		tc -n $ns2 qdisc add dev ns2eth$i root netem rate 20mbit delay 1ms
 	done
 }
 
@@ -142,7 +141,7 @@ init() {
 
 	mptcp_lib_check_mptcp
 	mptcp_lib_check_kallsyms
-	mptcp_lib_check_tools ip ss "${iptables}" "${ip6tables}"
+	mptcp_lib_check_tools ip tc ss "${iptables}" "${ip6tables}"
 
 	sin=$(mktemp)
 	sout=$(mktemp)
@@ -606,173 +605,65 @@ kill_events_pids()
 
 pm_nl_set_limits()
 {
-	local ns=$1
-	local addrs=$2
-	local subflows=$3
-
-	if [ $ip_mptcp -eq 1 ]; then
-		ip -n $ns mptcp limits set add_addr_accepted $addrs subflows $subflows
-	else
-		ip netns exec $ns ./pm_nl_ctl limits $addrs $subflows
-	fi
+	mptcp_lib_pm_nl_set_limits "${@}"
 }
 
 pm_nl_add_endpoint()
 {
-	local ns=$1
-	local addr=$2
-	local flags _flags
-	local port _port
-	local dev _dev
-	local id _id
-	local nr=2
-
-	local p
-	for p in "${@}"
-	do
-		if [ $p = "flags" ]; then
-			eval _flags=\$"$nr"
-			[ -n "$_flags" ]; flags="flags $_flags"
-		fi
-		if [ $p = "dev" ]; then
-			eval _dev=\$"$nr"
-			[ -n "$_dev" ]; dev="dev $_dev"
-		fi
-		if [ $p = "id" ]; then
-			eval _id=\$"$nr"
-			[ -n "$_id" ]; id="id $_id"
-		fi
-		if [ $p = "port" ]; then
-			eval _port=\$"$nr"
-			[ -n "$_port" ]; port="port $_port"
-		fi
-
-		nr=$((nr + 1))
-	done
-
-	if [ $ip_mptcp -eq 1 ]; then
-		ip -n $ns mptcp endpoint add $addr ${_flags//","/" "} $dev $id $port
-	else
-		ip netns exec $ns ./pm_nl_ctl add $addr $flags $dev $id $port
-	fi
+	mptcp_lib_pm_nl_add_endpoint "${@}"
 }
 
 pm_nl_del_endpoint()
 {
-	local ns=$1
-	local id=$2
-	local addr=$3
-
-	if [ $ip_mptcp -eq 1 ]; then
-		[ $id -ne 0 ] && addr=''
-		ip -n $ns mptcp endpoint delete id $id $addr
-	else
-		ip netns exec $ns ./pm_nl_ctl del $id $addr
-	fi
+	mptcp_lib_pm_nl_del_endpoint "${@}"
 }
 
 pm_nl_flush_endpoint()
 {
-	local ns=$1
-
-	if [ $ip_mptcp -eq 1 ]; then
-		ip -n $ns mptcp endpoint flush
-	else
-		ip netns exec $ns ./pm_nl_ctl flush
-	fi
+	mptcp_lib_pm_nl_flush_endpoint "${@}"
 }
 
 pm_nl_show_endpoints()
 {
-	local ns=$1
-
-	if [ $ip_mptcp -eq 1 ]; then
-		ip -n $ns mptcp endpoint show
-	else
-		ip netns exec $ns ./pm_nl_ctl dump
-	fi
+	mptcp_lib_pm_nl_show_endpoints "${@}"
 }
 
 pm_nl_change_endpoint()
 {
-	local ns=$1
-	local id=$2
-	local flags=$3
-
-	if [ $ip_mptcp -eq 1 ]; then
-		ip -n $ns mptcp endpoint change id $id ${flags//","/" "}
-	else
-		ip netns exec $ns ./pm_nl_ctl set id $id flags $flags
-	fi
+	mptcp_lib_pm_nl_change_endpoint "${@}"
 }
 
 pm_nl_check_endpoint()
 {
-	local line expected_line
 	local msg="$1"
 	local ns=$2
 	local addr=$3
-	local _flags=""
-	local flags
-	local _port
-	local port
-	local dev
-	local _id
-	local id
+	local flags dev id port
 
 	print_check "${msg}"
 
 	shift 3
 	while [ -n "$1" ]; do
-		if [ $1 = "flags" ]; then
-			_flags=$2
-			[ -n "$_flags" ]; flags="flags $_flags"
-			shift
-		elif [ $1 = "dev" ]; then
-			[ -n "$2" ]; dev="dev $2"
+		case "${1}" in
+		"flags" | "dev" | "id" | "port")
+			eval "${1}"="${2}"
 			shift
-		elif [ $1 = "id" ]; then
-			_id=$2
-			[ -n "$_id" ]; id="id $_id"
-			shift
-		elif [ $1 = "port" ]; then
-			_port=$2
-			[ -n "$_port" ]; port=" port $_port"
-			shift
-		fi
+			;;
+		*)
+			;;
+		esac
 
 		shift
 	done
 
-	if [ -z "$id" ]; then
+	if [ -z "${id}" ]; then
 		test_fail "bad test - missing endpoint id"
 		return
 	fi
 
-	if [ $ip_mptcp -eq 1 ]; then
-		# get line and trim trailing whitespace
-		line=$(ip -n $ns mptcp endpoint show $id)
-		line="${line% }"
-		# the dump order is: address id flags port dev
-		[ -n "$addr" ] && expected_line="$addr"
-		expected_line+=" $id"
-		[ -n "$_flags" ] && expected_line+=" ${_flags//","/" "}"
-		[ -n "$dev" ] && expected_line+=" $dev"
-		[ -n "$port" ] && expected_line+=" $port"
-	else
-		line=$(ip netns exec $ns ./pm_nl_ctl get $_id)
-		# the dump order is: id flags dev address port
-		expected_line="$id"
-		[ -n "$flags" ] && expected_line+=" $flags"
-		[ -n "$dev" ] && expected_line+=" $dev"
-		[ -n "$addr" ] && expected_line+=" $addr"
-		[ -n "$_port" ] && expected_line+=" $_port"
-	fi
-	if [ "$line" = "$expected_line" ]; then
-		print_ok
-	else
-		fail_test "expected '$expected_line' found '$line'"
-	fi
+	check_output "mptcp_lib_pm_nl_get_endpoint ${ns} ${id}" \
+		"$(mptcp_lib_pm_nl_format_endpoints \
+			"${id},${addr},${flags//","/" "},${dev},${port}")"
 }
 
 pm_nl_set_endpoint()
@@ -3212,7 +3103,7 @@ fail_tests()
 
 	# multiple subflows
 	if reset_with_fail "MP_FAIL MP_RST" 2; then
-		tc -n $ns2 qdisc add dev ns2eth1 root netem rate 1mbit delay 5
+		tc -n $ns2 qdisc add dev ns2eth1 root netem rate 1mbit delay 5ms
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow
@@ -3702,7 +3593,7 @@ while getopts "${all_tests_args}cCih" opt; do
 			checksum=true
 			;;
 		i)
-			ip_mptcp=1
+			mptcp_lib_set_ip_mptcp
 			;;
 		h)
 			usage
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
index d529b4b37af8..ad2ebda5cb64 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
@@ -23,6 +23,7 @@ MPTCP_LIB_SUBTESTS=()
 MPTCP_LIB_SUBTESTS_DUPLICATED=0
 MPTCP_LIB_TEST_COUNTER=0
 MPTCP_LIB_TEST_FORMAT="%02u %-50s"
+MPTCP_LIB_IP_MPTCP=0
 
 # only if supported (or forced) and not disabled, see no-color.org
 if { [ -t 1 ] || [ "${SELFTESTS_MPTCP_LIB_COLOR_FORCE:-}" = "1" ]; } &&
@@ -384,6 +385,12 @@ mptcp_lib_check_tools() {
 				exit ${KSFT_SKIP}
 			fi
 			;;
+		"tc")
+			if ! tc -help &> /dev/null; then
+				mptcp_lib_pr_skip "Could not run test without tc tool"
+				exit ${KSFT_SKIP}
+			fi
+			;;
 		"ss")
 			if ! ss -h | grep -q MPTCP; then
 				mptcp_lib_pr_skip "ss tool does not support MPTCP"
@@ -505,3 +512,131 @@ mptcp_lib_verify_listener_events() {
 	mptcp_lib_check_expected "type" "family" "saddr" "sport" || rc="${?}"
 	return "${rc}"
 }
+
+mptcp_lib_set_ip_mptcp() {
+	MPTCP_LIB_IP_MPTCP=1
+}
+
+mptcp_lib_is_ip_mptcp() {
+	[ "${MPTCP_LIB_IP_MPTCP}" = "1" ]
+}
+
+# format: <id>,<ip>,<flags>,<dev>
+mptcp_lib_pm_nl_format_endpoints() {
+	local entry id ip flags dev port
+
+	for entry in "${@}"; do
+		IFS=, read -r id ip flags dev port <<< "${entry}"
+		if mptcp_lib_is_ip_mptcp; then
+			echo -n "${ip}"
+			[ -n "${port}" ] && echo -n " port ${port}"
+			echo -n " id ${id}"
+			[ -n "${flags}" ] && echo -n " ${flags}"
+			[ -n "${dev}" ] && echo -n " dev ${dev}"
+			echo " " # always a space at the end
+		else
+			echo -n "id ${id}"
+			echo -n " flags ${flags//" "/","}"
+			[ -n "${dev}" ] && echo -n " dev ${dev}"
+			echo -n " ${ip}"
+			[ -n "${port}" ] && echo -n " ${port}"
+			echo ""
+		fi
+	done
+}
+
+mptcp_lib_pm_nl_get_endpoint() {
+	local ns=${1}
+	local id=${2}
+
+	if mptcp_lib_is_ip_mptcp; then
+		ip -n "${ns}" mptcp endpoint show id "${id}"
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl get "${id}"
+	fi
+}
+
+mptcp_lib_pm_nl_set_limits() {
+	local ns=${1}
+	local addrs=${2}
+	local subflows=${3}
+
+	if mptcp_lib_is_ip_mptcp; then
+		ip -n "${ns}" mptcp limits set add_addr_accepted "${addrs}" subflows "${subflows}"
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl limits "${addrs}" "${subflows}"
+	fi
+}
+
+mptcp_lib_pm_nl_add_endpoint() {
+	local ns=${1}
+	local addr=${2}
+	local flags dev id port
+	local nr=2
+
+	local p
+	for p in "${@}"; do
+		case "${p}" in
+		"flags" | "dev" | "id" | "port")
+			eval "${p}"=\$"${nr}"
+			;;
+		esac
+
+		nr=$((nr + 1))
+	done
+
+	if mptcp_lib_is_ip_mptcp; then
+		# shellcheck disable=SC2086 # blanks in flags, no double quote
+		ip -n "${ns}" mptcp endpoint add "${addr}" ${flags//","/" "} \
+			${dev:+dev "${dev}"} ${id:+id "${id}"} ${port:+port "${port}"}
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl add "${addr}" ${flags:+flags "${flags}"} \
+			${dev:+dev "${dev}"} ${id:+id "${id}"} ${port:+port "${port}"}
+	fi
+}
+
+mptcp_lib_pm_nl_del_endpoint() {
+	local ns=${1}
+	local id=${2}
+	local addr=${3}
+
+	if mptcp_lib_is_ip_mptcp; then
+		[ "${id}" -ne 0 ] && addr=''
+		ip -n "${ns}" mptcp endpoint delete id "${id}" ${addr:+"${addr}"}
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl del "${id}" "${addr}"
+	fi
+}
+
+mptcp_lib_pm_nl_flush_endpoint() {
+	local ns=${1}
+
+	if mptcp_lib_is_ip_mptcp; then
+		ip -n "${ns}" mptcp endpoint flush
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl flush
+	fi
+}
+
+mptcp_lib_pm_nl_show_endpoints() {
+	local ns=${1}
+
+	if mptcp_lib_is_ip_mptcp; then
+		ip -n "${ns}" mptcp endpoint show
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl dump
+	fi
+}
+
+mptcp_lib_pm_nl_change_endpoint() {
+	local ns=${1}
+	local id=${2}
+	local flags=${3}
+
+	if mptcp_lib_is_ip_mptcp; then
+		# shellcheck disable=SC2086 # blanks in flags, no double quote
+		ip -n "${ns}" mptcp endpoint change id "${id}" ${flags//","/" "}
+	else
+		ip netns exec "${ns}" ./pm_nl_ctl set id "${id}" flags "${flags}"
+	fi
+}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
index e2d70c18786e..68899a303a1a 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -22,6 +22,28 @@ ns1=""
 ns2=""
 ns_sbox=""
 
+usage() {
+	echo "Usage: $0 [ -i ] [ -h ]"
+	echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'"
+	echo -e "\t-h: help"
+}
+
+while getopts "hi" option;do
+	case "$option" in
+	"h")
+		usage "$0"
+		exit ${KSFT_PASS}
+		;;
+	"i")
+		mptcp_lib_set_ip_mptcp
+		;;
+	"?")
+		usage "$0"
+		exit ${KSFT_FAIL}
+		;;
+	esac
+done
+
 add_mark_rules()
 {
 	local ns=$1
@@ -58,15 +80,15 @@ init()
 		# let $ns2 reach any $ns1 address from any interface
 		ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i
 
-		ip netns exec $ns1 ./pm_nl_ctl add 10.0.$i.1 flags signal
-		ip netns exec $ns1 ./pm_nl_ctl add dead:beef:$i::1 flags signal
+		mptcp_lib_pm_nl_add_endpoint "${ns1}" "10.0.${i}.1" flags signal
+		mptcp_lib_pm_nl_add_endpoint "${ns1}" "dead:beef:${i}::1" flags signal
 
-		ip netns exec $ns2 ./pm_nl_ctl add 10.0.$i.2 flags signal
-		ip netns exec $ns2 ./pm_nl_ctl add dead:beef:$i::2 flags signal
+		mptcp_lib_pm_nl_add_endpoint "${ns2}" "10.0.${i}.2" flags signal
+		mptcp_lib_pm_nl_add_endpoint "${ns2}" "dead:beef:${i}::2" flags signal
 	done
 
-	ip netns exec $ns1 ./pm_nl_ctl limits 8 8
-	ip netns exec $ns2 ./pm_nl_ctl limits 8 8
+	mptcp_lib_pm_nl_set_limits "${ns1}" 8 8
+	mptcp_lib_pm_nl_set_limits "${ns2}" 8 8
 
 	add_mark_rules $ns1 1
 	add_mark_rules $ns2 2
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
index 6ab8c5d36340..2757378b1b13 100755
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -1,28 +1,28 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-# Double quotes to prevent globbing and word splitting is recommended in new
-# code but we accept it, especially because there were too many before having
-# address all other issues detected by shellcheck.
-#shellcheck disable=SC2086
-
 . "$(dirname "${0}")/mptcp_lib.sh"
 
 ret=0
 
 usage() {
-	echo "Usage: $0 [ -h ]"
+	echo "Usage: $0 [ -i ] [ -h ]"
+	echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'"
+	echo -e "\t-h: help"
 }
 
-optstring=h
+optstring=hi
 while getopts "$optstring" option;do
 	case "$option" in
 	"h")
-		usage $0
+		usage "$0"
 		exit ${KSFT_PASS}
 		;;
+	"i")
+		mptcp_lib_set_ip_mptcp
+		;;
 	"?")
-		usage $0
+		usage "$0"
 		exit ${KSFT_FAIL}
 		;;
 	esac
@@ -35,7 +35,7 @@ err=$(mktemp)
 #shellcheck disable=SC2317
 cleanup()
 {
-	rm -f $err
+	rm -f "${err}"
 	mptcp_lib_ns_exit "${ns1}"
 }
 
@@ -46,6 +46,76 @@ trap cleanup EXIT
 
 mptcp_lib_ns_init ns1
 
+format_limits() {
+	local accept="${1}"
+	local subflows="${2}"
+
+	if mptcp_lib_is_ip_mptcp; then
+		# with a space at the end
+		printf "add_addr_accepted %d subflows %d \n" "${accept}" "${subflows}"
+	else
+		printf "accept %d\nsubflows %d\n" "${accept}" "${subflows}"
+	fi
+}
+
+get_limits() {
+	if mptcp_lib_is_ip_mptcp; then
+		ip -n "${ns1}" mptcp limits
+	else
+		ip netns exec "${ns1}" ./pm_nl_ctl limits
+	fi
+}
+
+format_endpoints() {
+	mptcp_lib_pm_nl_format_endpoints "${@}"
+}
+
+get_endpoint() {
+	# shellcheck disable=SC2317 # invoked indirectly
+	mptcp_lib_pm_nl_get_endpoint "${ns1}" "${@}"
+}
+
+change_address() {
+	local addr=${1}
+	local flags=${2}
+
+	if mptcp_lib_is_ip_mptcp; then
+		ip -n "${ns1}" mptcp endpoint change "${addr}" "${flags}"
+	else
+		ip netns exec "${ns1}" ./pm_nl_ctl set "${addr}" flags "${flags}"
+	fi
+}
+
+set_limits()
+{
+	mptcp_lib_pm_nl_set_limits "${ns1}" "${@}"
+}
+
+add_endpoint()
+{
+	mptcp_lib_pm_nl_add_endpoint "${ns1}" "${@}"
+}
+
+del_endpoint()
+{
+	mptcp_lib_pm_nl_del_endpoint "${ns1}" "${@}"
+}
+
+flush_endpoint()
+{
+	mptcp_lib_pm_nl_flush_endpoint "${ns1}"
+}
+
+show_endpoints()
+{
+	mptcp_lib_pm_nl_show_endpoints "${ns1}"
+}
+
+change_endpoint()
+{
+	mptcp_lib_pm_nl_change_endpoint "${ns1}" "${@}"
+}
+
 check()
 {
 	local cmd="$1"
@@ -67,125 +137,126 @@ check()
 	fi
 }
 
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "defaults addr list"
+check "show_endpoints" "" "defaults addr list"
 
-default_limits="$(ip netns exec $ns1 ./pm_nl_ctl limits)"
+default_limits="$(get_limits)"
 if mptcp_lib_expect_all_features; then
-	check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
-subflows 2" "defaults limits"
+	check "get_limits" "$(format_limits 0 2)" "defaults limits"
 fi
 
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 flags subflow dev lo
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 flags signal,backup
-check "ip netns exec $ns1 ./pm_nl_ctl get 1" "id 1 flags  10.0.1.1" "simple add/get addr"
+add_endpoint 10.0.1.1
+add_endpoint 10.0.1.2 flags subflow dev lo
+add_endpoint 10.0.1.3 flags signal,backup
+check "get_endpoint 1" "$(format_endpoints "1,10.0.1.1")" "simple add/get addr"
 
-check "ip netns exec $ns1 ./pm_nl_ctl dump" \
-"id 1 flags  10.0.1.1
-id 2 flags subflow dev lo 10.0.1.2
-id 3 flags signal,backup 10.0.1.3" "dump addrs"
+check "show_endpoints" \
+	"$(format_endpoints "1,10.0.1.1" \
+			    "2,10.0.1.2,subflow,lo" \
+			    "3,10.0.1.3,signal backup")" "dump addrs"
 
-ip netns exec $ns1 ./pm_nl_ctl del 2
-check "ip netns exec $ns1 ./pm_nl_ctl get 2" "" "simple del addr"
-check "ip netns exec $ns1 ./pm_nl_ctl dump" \
-"id 1 flags  10.0.1.1
-id 3 flags signal,backup 10.0.1.3" "dump addrs after del"
+del_endpoint 2
+check "get_endpoint 2" "" "simple del addr"
+check "show_endpoints" \
+	"$(format_endpoints "1,10.0.1.1" \
+			    "3,10.0.1.3,signal backup")" "dump addrs after del"
 
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 2>/dev/null
-check "ip netns exec $ns1 ./pm_nl_ctl get 4" "" "duplicate addr"
+add_endpoint 10.0.1.3 2>/dev/null
+check "get_endpoint 4" "" "duplicate addr"
 
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.4 flags signal
-check "ip netns exec $ns1 ./pm_nl_ctl get 4" "id 4 flags signal 10.0.1.4" "id addr increment"
+add_endpoint 10.0.1.4 flags signal
+check "get_endpoint 4" "$(format_endpoints "4,10.0.1.4,signal")" "id addr increment"
 
 for i in $(seq 5 9); do
-	ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.$i flags signal >/dev/null 2>&1
+	add_endpoint "10.0.1.${i}" flags signal >/dev/null 2>&1
 done
-check "ip netns exec $ns1 ./pm_nl_ctl get 9" "id 9 flags signal 10.0.1.9" "hard addr limit"
-check "ip netns exec $ns1 ./pm_nl_ctl get 10" "" "above hard addr limit"
+check "get_endpoint 9" "$(format_endpoints "9,10.0.1.9,signal")" "hard addr limit"
+check "get_endpoint 10" "" "above hard addr limit"
 
-ip netns exec $ns1 ./pm_nl_ctl del 9
+del_endpoint 9
 for i in $(seq 10 255); do
-	ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.9 id $i
-	ip netns exec $ns1 ./pm_nl_ctl del $i
+	add_endpoint 10.0.0.9 id "${i}"
+	del_endpoint "${i}"
 done
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags  10.0.1.1
-id 3 flags signal,backup 10.0.1.3
-id 4 flags signal 10.0.1.4
-id 5 flags signal 10.0.1.5
-id 6 flags signal 10.0.1.6
-id 7 flags signal 10.0.1.7
-id 8 flags signal 10.0.1.8" "id limit"
-
-ip netns exec $ns1 ./pm_nl_ctl flush
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "flush addrs"
-
-ip netns exec $ns1 ./pm_nl_ctl limits 9 1 2>/dev/null
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "rcv addrs above hard limit"
-
-ip netns exec $ns1 ./pm_nl_ctl limits 1 9 2>/dev/null
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "subflows above hard limit"
-
-ip netns exec $ns1 ./pm_nl_ctl limits 8 8
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 8
-subflows 8" "set limits"
-
-ip netns exec $ns1 ./pm_nl_ctl flush
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 id 100
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.4
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.5 id 254
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.6
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.7
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.8
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags  10.0.1.1
-id 2 flags  10.0.1.2
-id 3 flags  10.0.1.7
-id 4 flags  10.0.1.8
-id 100 flags  10.0.1.3
-id 101 flags  10.0.1.4
-id 254 flags  10.0.1.5
-id 255 flags  10.0.1.6" "set ids"
-
-ip netns exec $ns1 ./pm_nl_ctl flush
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.1
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.2 id 254
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.3
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.4
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.5 id 253
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.6
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.7
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.8
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags  10.0.0.1
-id 2 flags  10.0.0.4
-id 3 flags  10.0.0.6
-id 4 flags  10.0.0.7
-id 5 flags  10.0.0.8
-id 253 flags  10.0.0.5
-id 254 flags  10.0.0.2
-id 255 flags  10.0.0.3" "wrap-around ids"
-
-ip netns exec $ns1 ./pm_nl_ctl flush
-ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 flags subflow
-ip netns exec $ns1 ./pm_nl_ctl set 10.0.1.1 flags backup
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
-subflow,backup 10.0.1.1" "set flags (backup)"
-ip netns exec $ns1 ./pm_nl_ctl set 10.0.1.1 flags nobackup
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
-subflow 10.0.1.1" "          (nobackup)"
+check "show_endpoints" \
+	"$(format_endpoints "1,10.0.1.1" \
+			    "3,10.0.1.3,signal backup" \
+			    "4,10.0.1.4,signal" \
+			    "5,10.0.1.5,signal" \
+			    "6,10.0.1.6,signal" \
+			    "7,10.0.1.7,signal" \
+			    "8,10.0.1.8,signal")" "id limit"
+
+flush_endpoint
+check "show_endpoints" "" "flush addrs"
+
+set_limits 9 1 2>/dev/null
+check "get_limits" "${default_limits}" "rcv addrs above hard limit"
+
+set_limits 1 9 2>/dev/null
+check "get_limits" "${default_limits}" "subflows above hard limit"
+
+set_limits 8 8
+check "get_limits" "$(format_limits 8 8)" "set limits"
+
+flush_endpoint
+add_endpoint 10.0.1.1
+add_endpoint 10.0.1.2
+add_endpoint 10.0.1.3 id 100
+add_endpoint 10.0.1.4
+add_endpoint 10.0.1.5 id 254
+add_endpoint 10.0.1.6
+add_endpoint 10.0.1.7
+add_endpoint 10.0.1.8
+check "show_endpoints" \
+	"$(format_endpoints "1,10.0.1.1" \
+			    "2,10.0.1.2" \
+			    "3,10.0.1.7" \
+			    "4,10.0.1.8" \
+			    "100,10.0.1.3" \
+			    "101,10.0.1.4" \
+			    "254,10.0.1.5" \
+			    "255,10.0.1.6")" "set ids"
+
+flush_endpoint
+add_endpoint 10.0.0.1
+add_endpoint 10.0.0.2 id 254
+add_endpoint 10.0.0.3
+add_endpoint 10.0.0.4
+add_endpoint 10.0.0.5 id 253
+add_endpoint 10.0.0.6
+add_endpoint 10.0.0.7
+add_endpoint 10.0.0.8
+check "show_endpoints" \
+	"$(format_endpoints "1,10.0.0.1" \
+			    "2,10.0.0.4" \
+			    "3,10.0.0.6" \
+			    "4,10.0.0.7" \
+			    "5,10.0.0.8" \
+			    "253,10.0.0.5" \
+			    "254,10.0.0.2" \
+			    "255,10.0.0.3")" "wrap-around ids"
+
+flush_endpoint
+add_endpoint 10.0.1.1 flags subflow
+change_address 10.0.1.1 backup
+check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow backup")" \
+	"set flags (backup)"
+change_address 10.0.1.1 nobackup
+check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow")" \
+	"          (nobackup)"
 
 # fullmesh support has been added later
-ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh 2>/dev/null
-if ip netns exec $ns1 ./pm_nl_ctl dump | grep -q "fullmesh" ||
+change_endpoint 1 fullmesh 2>/dev/null
+if show_endpoints | grep -q "fullmesh" ||
    mptcp_lib_expect_all_features; then
-	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
-subflow,fullmesh 10.0.1.1" "          (fullmesh)"
-	ip netns exec $ns1 ./pm_nl_ctl set id 1 flags nofullmesh
-	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
-subflow 10.0.1.1" "          (nofullmesh)"
-	ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh
-	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
-subflow,backup,fullmesh 10.0.1.1" "          (backup,fullmesh)"
+	check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow fullmesh")" \
+		"          (fullmesh)"
+	change_endpoint 1 nofullmesh
+	check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow")" \
+		"          (nofullmesh)"
+	change_endpoint 1 backup,fullmesh
+	check "show_endpoints" "$(format_endpoints "1,10.0.1.1,subflow backup fullmesh")" \
+		"          (backup,fullmesh)"
 else
 	for st in fullmesh nofullmesh backup,fullmesh; do
 		st="          (${st})"
diff --git a/tools/testing/selftests/net/mptcp/pm_nl_ctl.c b/tools/testing/selftests/net/mptcp/pm_nl_ctl.c
index 7426a2cbd4a0..7ad5a59adff2 100644
--- a/tools/testing/selftests/net/mptcp/pm_nl_ctl.c
+++ b/tools/testing/selftests/net/mptcp/pm_nl_ctl.c
@@ -1276,7 +1276,7 @@ int add_listener(int argc, char *argv[])
 	struct sockaddr_storage addr;
 	struct sockaddr_in6 *a6;
 	struct sockaddr_in *a4;
-	u_int16_t family;
+	u_int16_t family = AF_UNSPEC;
 	int enable = 1;
 	int sock;
 	int err;
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
index 1b2366220388..4b14b4412166 100755
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -27,10 +27,11 @@ capout=""
 size=0
 
 usage() {
-	echo "Usage: $0 [ -b ] [ -c ] [ -d ]"
+	echo "Usage: $0 [ -b ] [ -c ] [ -d ] [ -i]"
 	echo -e "\t-b: bail out after first error, otherwise runs al testcases"
 	echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)"
 	echo -e "\t-d: debug this script"
+	echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'"
 }
 
 # This function is used in the cleanup trap
@@ -45,7 +46,7 @@ cleanup()
 }
 
 mptcp_lib_check_mptcp
-mptcp_lib_check_tools ip
+mptcp_lib_check_tools ip tc
 
 #  "$ns1"              ns2                    ns3
 #     ns1eth1    ns2eth1   ns2eth3      ns3eth1
@@ -85,8 +86,8 @@ setup()
 	ip -net "$ns1" route add default via 10.0.2.2 metric 101
 	ip -net "$ns1" route add default via dead:beef:2::2 metric 101
 
-	ip netns exec "$ns1" ./pm_nl_ctl limits 1 1
-	ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow
+	mptcp_lib_pm_nl_set_limits "${ns1}" 1 1
+	mptcp_lib_pm_nl_add_endpoint "${ns1}" 10.0.2.1 dev ns1eth2 flags subflow
 
 	ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1
 	ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad
@@ -108,7 +109,7 @@ setup()
 	ip -net "$ns3" route add default via 10.0.3.2
 	ip -net "$ns3" route add default via dead:beef:3::2
 
-	ip netns exec "$ns3" ./pm_nl_ctl limits 1 1
+	mptcp_lib_pm_nl_set_limits "${ns3}" 1 1
 
 	# debug build can slow down measurably the test program
 	# we use quite tight time limit on the run-time, to ensure
@@ -216,8 +217,8 @@ run_test()
 	shift 4
 	local msg=$*
 
-	[ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1=""
-	[ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2=""
+	[ $delay1 -gt 0 ] && delay1="delay ${delay1}ms" || delay1=""
+	[ $delay2 -gt 0 ] && delay2="delay ${delay2}ms" || delay2=""
 
 	for dev in ns1eth1 ns1eth2; do
 		tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1
@@ -259,7 +260,7 @@ run_test()
 	fi
 }
 
-while getopts "bcdh" option;do
+while getopts "bcdhi" option;do
 	case "$option" in
 	"h")
 		usage $0
@@ -274,6 +275,9 @@ while getopts "bcdh" option;do
 	"d")
 		set -x
 		;;
+	"i")
+		mptcp_lib_set_ip_mptcp
+		;;
 	"?")
 		usage $0
 		exit ${KSFT_FAIL}
diff --git a/tools/testing/selftests/net/nat6to4.c b/tools/testing/selftests/net/nat6to4.bpf.c
index ac54c36b25fc..ac54c36b25fc 100644
--- a/tools/testing/selftests/net/nat6to4.c
+++ b/tools/testing/selftests/net/nat6to4.bpf.c
diff --git a/tools/testing/selftests/netfilter/.gitignore b/tools/testing/selftests/net/netfilter/.gitignore
index c2229b3e40d4..0a64d6d0e29a 100644
--- a/tools/testing/selftests/netfilter/.gitignore
+++ b/tools/testing/selftests/net/netfilter/.gitignore
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
-nf-queue
-connect_close
 audit_logread
+connect_close
 conntrack_dump_flush
 sctp_collision
+nf_queue
diff --git a/tools/testing/selftests/net/netfilter/Makefile b/tools/testing/selftests/net/netfilter/Makefile
new file mode 100644
index 000000000000..47945b2b3f92
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/Makefile
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+
+top_srcdir = ../../../../..
+
+HOSTPKG_CONFIG := pkg-config
+MNL_CFLAGS := $(shell $(HOSTPKG_CONFIG) --cflags libmnl 2>/dev/null)
+MNL_LDLIBS := $(shell $(HOSTPKG_CONFIG) --libs libmnl 2>/dev/null || echo -lmnl)
+
+TEST_PROGS := br_netfilter.sh bridge_brouter.sh
+TEST_PROGS += conntrack_icmp_related.sh
+TEST_PROGS += conntrack_ipip_mtu.sh
+TEST_PROGS += conntrack_tcp_unreplied.sh
+TEST_PROGS += conntrack_sctp_collision.sh
+TEST_PROGS += conntrack_vrf.sh
+TEST_PROGS += ipvs.sh
+TEST_PROGS += nf_conntrack_packetdrill.sh
+TEST_PROGS += nf_nat_edemux.sh
+TEST_PROGS += nft_audit.sh
+TEST_PROGS += nft_concat_range.sh
+TEST_PROGS += nft_conntrack_helper.sh
+TEST_PROGS += nft_fib.sh
+TEST_PROGS += nft_flowtable.sh
+TEST_PROGS += nft_meta.sh
+TEST_PROGS += nft_nat.sh
+TEST_PROGS += nft_nat_zones.sh
+TEST_PROGS += nft_queue.sh
+TEST_PROGS += nft_synproxy.sh
+TEST_PROGS += nft_zones_many.sh
+TEST_PROGS += rpath.sh
+TEST_PROGS += xt_string.sh
+
+TEST_PROGS_EXTENDED = nft_concat_range_perf.sh
+
+TEST_GEN_PROGS = conntrack_dump_flush
+
+TEST_GEN_FILES = audit_logread
+TEST_GEN_FILES += connect_close nf_queue
+TEST_GEN_FILES += sctp_collision
+
+include ../../lib.mk
+
+$(OUTPUT)/nf_queue: CFLAGS += $(MNL_CFLAGS)
+$(OUTPUT)/nf_queue: LDLIBS += $(MNL_LDLIBS)
+
+$(OUTPUT)/conntrack_dump_flush: CFLAGS += $(MNL_CFLAGS)
+$(OUTPUT)/conntrack_dump_flush: LDLIBS += $(MNL_LDLIBS)
+
+TEST_FILES := lib.sh
+TEST_FILES += packetdrill
+
+TEST_INCLUDES := \
+	../lib.sh
diff --git a/tools/testing/selftests/netfilter/audit_logread.c b/tools/testing/selftests/net/netfilter/audit_logread.c
index a0a880fc2d9d..a0a880fc2d9d 100644
--- a/tools/testing/selftests/netfilter/audit_logread.c
+++ b/tools/testing/selftests/net/netfilter/audit_logread.c
diff --git a/tools/testing/selftests/net/netfilter/br_netfilter.sh b/tools/testing/selftests/net/netfilter/br_netfilter.sh
new file mode 100755
index 000000000000..c28379a965d8
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/br_netfilter.sh
@@ -0,0 +1,171 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test for legacy br_netfilter module combined with connection tracking,
+# a combination that doesn't really work.
+# Multicast/broadcast packets race for hash table insertion.
+
+#           eth0    br0     eth0
+# setup is: ns1 <->,ns0 <-> ns3
+#           ns2 <-'    `'-> ns4
+
+source lib.sh
+
+checktool "nft --version" "run test without nft tool"
+
+cleanup() {
+	cleanup_all_ns
+}
+
+trap cleanup EXIT
+
+setup_ns ns0 ns1 ns2 ns3 ns4
+
+ret=0
+
+do_ping()
+{
+	fromns="$1"
+	dstip="$2"
+
+	if ! ip netns exec "$fromns" ping -c 1 -q "$dstip" > /dev/null; then
+		echo "ERROR: ping from $fromns to $dstip"
+		ip netns exec "$ns0" nft list ruleset
+		ret=1
+	fi
+}
+
+bcast_ping()
+{
+	fromns="$1"
+	dstip="$2"
+
+	local packets=500
+
+	[ "$KSFT_MACHINE_SLOW" = yes ] && packets=100
+
+	for i in $(seq 1 $packets); do
+		if ! ip netns exec "$fromns" ping -q -f -b -c 1 -q "$dstip" > /dev/null 2>&1; then
+			echo "ERROR: ping -b from $fromns to $dstip"
+			ip netns exec "$ns0" nft list ruleset
+			ret=1
+			break
+		fi
+	done
+}
+
+ip netns exec "$ns0" sysctl -q net.ipv4.conf.all.rp_filter=0
+ip netns exec "$ns0" sysctl -q net.ipv4.conf.default.rp_filter=0
+
+if ! ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns1"; then
+	echo "SKIP: Can't create veth device"
+	exit $ksft_skip
+fi
+
+ip link add veth2 netns "$ns0" type veth peer name eth0 netns "$ns2"
+ip link add veth3 netns "$ns0" type veth peer name eth0 netns "$ns3"
+ip link add veth4 netns "$ns0" type veth peer name eth0 netns "$ns4"
+
+for i in $(seq 1 4); do
+  ip -net "$ns0" link set "veth$i" up
+done
+
+if ! ip -net "$ns0" link add br0 type bridge stp_state 0 forward_delay 0 nf_call_iptables 1 nf_call_ip6tables 1 nf_call_arptables 1; then
+	echo "SKIP: Can't create bridge br0"
+	exit $ksft_skip
+fi
+
+# make veth0,1,2 part of bridge.
+for i in $(seq 1 3); do
+  ip -net "$ns0" link set "veth$i" master br0
+done
+
+# add a macvlan on top of the bridge.
+MACVLAN_ADDR=ba:f3:13:37:42:23
+ip -net "$ns0" link add link br0 name macvlan0 type macvlan mode private
+ip -net "$ns0" link set macvlan0 address ${MACVLAN_ADDR}
+ip -net "$ns0" link set macvlan0 up
+ip -net "$ns0" addr add 10.23.0.1/24 dev macvlan0
+
+# add a macvlan on top of veth4.
+MACVLAN_ADDR=ba:f3:13:37:42:24
+ip -net "$ns0" link add link veth4 name macvlan4 type macvlan mode passthru
+ip -net "$ns0" link set macvlan4 address ${MACVLAN_ADDR}
+ip -net "$ns0" link set macvlan4 up
+
+# make the macvlan part of the bridge.
+# veth4 is not a bridge port, only the macvlan on top of it.
+ip -net "$ns0" link set macvlan4 master br0
+
+ip -net "$ns0" link set br0 up
+ip -net "$ns0" addr add 10.0.0.1/24 dev br0
+
+modprobe -q br_netfilter
+if ! ip netns exec "$ns0" sysctl -q net.bridge.bridge-nf-call-iptables=1; then
+	echo "SKIP: bridge netfilter not available"
+	ret=$ksft_skip
+fi
+
+# for testing, so namespaces will reply to ping -b probes.
+ip netns exec "$ns0" sysctl -q net.ipv4.icmp_echo_ignore_broadcasts=0
+
+# enable conntrack in ns0 and drop broadcast packets in forward to
+# avoid them from getting confirmed in the postrouting hook before
+# the cloned skb is passed up the stack.
+ip netns exec "$ns0" nft -f - <<EOF
+table ip filter {
+	chain input {
+		type filter hook input priority 1; policy accept
+		iifname br0 counter
+		ct state new accept
+	}
+}
+
+table bridge filter {
+	chain forward {
+		type filter hook forward priority 0; policy accept
+		meta pkttype broadcast ip protocol icmp counter drop
+	}
+}
+EOF
+if [ "$?" -ne 0 ];then
+	echo "SKIP: could not add nftables ruleset"
+	exit $ksft_skip
+fi
+
+# place 1, 2 & 3 in same subnet, connected via ns0:br0.
+# ns4 is placed in same subnet as well, but its not
+# part of the bridge: the corresponding veth4 is not
+# part of the bridge, only its macvlan interface.
+for i in $(seq 1 4); do
+  eval ip -net \$ns"$i" link set eth0 up
+done
+for i in $(seq 1 2); do
+  eval ip -net \$ns"$i" addr add "10.0.0.1$i/24" dev eth0
+done
+
+ip -net "$ns3" addr add 10.23.0.13/24 dev eth0
+ip -net "$ns4" addr add 10.23.0.14/24 dev eth0
+
+# test basic connectivity
+do_ping "$ns1" 10.0.0.12
+do_ping "$ns3" 10.23.0.1
+do_ping "$ns4" 10.23.0.1
+
+bcast_ping "$ns1" 10.0.0.255
+
+# This should deliver broadcast to macvlan0, which is on top of ns0:br0.
+bcast_ping "$ns3" 10.23.0.255
+
+# same, this time via veth4:macvlan4.
+bcast_ping "$ns4" 10.23.0.255
+
+read t < /proc/sys/kernel/tainted
+if [ "$t" -eq 0 ];then
+	echo PASS: kernel not tainted
+else
+	echo ERROR: kernel is tainted
+	ret=1
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/net/netfilter/bridge_brouter.sh b/tools/testing/selftests/net/netfilter/bridge_brouter.sh
new file mode 100755
index 000000000000..2549b6590693
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/bridge_brouter.sh
@@ -0,0 +1,122 @@
+#!/bin/bash
+#
+# This test is for bridge 'brouting', i.e. make some packets being routed
+# rather than getting bridged even though they arrive on interface that is
+# part of a bridge.
+
+#           eth0    br0     eth0
+# setup is: ns1 <-> nsbr <-> ns2
+
+source lib.sh
+
+if ! ebtables -V > /dev/null 2>&1;then
+	echo "SKIP: Could not run test without ebtables"
+	exit $ksft_skip
+fi
+
+cleanup() {
+	cleanup_all_ns
+}
+
+trap cleanup EXIT
+
+setup_ns nsbr ns1 ns2
+
+ip netns exec "$nsbr" sysctl -q net.ipv4.conf.default.rp_filter=0
+ip netns exec "$nsbr" sysctl -q net.ipv4.conf.all.rp_filter=0
+if ! ip link add veth0 netns "$nsbr" type veth peer name eth0 netns "$ns1"; then
+	echo "SKIP: Can't create veth device"
+	exit $ksft_skip
+fi
+ip link add veth1 netns "$nsbr" type veth peer name eth0 netns "$ns2"
+
+if ! ip -net "$nsbr" link add br0 type bridge; then
+	echo "SKIP: Can't create bridge br0"
+	exit $ksft_skip
+fi
+
+ip -net "$nsbr" link set veth0 up
+ip -net "$nsbr" link set veth1 up
+
+ip -net "$nsbr" link set veth0 master br0
+ip -net "$nsbr" link set veth1 master br0
+ip -net "$nsbr" link set br0 up
+ip -net "$nsbr" addr add 10.0.0.1/24 dev br0
+
+# place both in same subnet, ${ns1} and ${ns2} connected via ${nsbr}:br0
+ip -net "$ns1" link set eth0 up
+ip -net "$ns2" link set eth0 up
+ip -net "$ns1" addr add 10.0.0.11/24 dev eth0
+ip -net "$ns2" addr add 10.0.0.12/24 dev eth0
+
+test_ebtables_broute()
+{
+	# redirect is needed so the dstmac is rewritten to the bridge itself,
+	# ip stack won't process OTHERHOST (foreign unicast mac) packets.
+	if ! ip netns exec "$nsbr" ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP; then
+		echo "SKIP: Could not add ebtables broute redirect rule"
+		return $ksft_skip
+	fi
+
+	ip netns exec "$nsbr" sysctl -q net.ipv4.conf.veth0.forwarding=0
+
+	# ping net${ns1}, expected to not work (ip forwarding is off)
+	if ip netns exec "$ns1" ping -q -c 1 10.0.0.12 -W 0.5 > /dev/null 2>&1; then
+		echo "ERROR: ping works, should have failed" 1>&2
+		return 1
+	fi
+
+	# enable forwarding on both interfaces.
+	# neither needs an ip address, but at least the bridge needs
+	# an ip address in same network segment as ${ns1} and ${ns2} (${nsbr}
+	# needs to be able to determine route for to-be-forwarded packet).
+	ip netns exec "$nsbr" sysctl -q net.ipv4.conf.veth0.forwarding=1
+	ip netns exec "$nsbr" sysctl -q net.ipv4.conf.veth1.forwarding=1
+
+	if ! ip netns exec "$ns1" ping -q -c 1 10.0.0.12 > /dev/null; then
+		echo "ERROR: ping did not work, but it should (broute+forward)" 1>&2
+		return 1
+	fi
+
+	echo "PASS: ${ns1}/${ns2} connectivity with active broute rule"
+	ip netns exec "$nsbr" ebtables -t broute -F
+
+	# ping net${ns1}, expected to work (frames are bridged)
+	if ! ip netns exec "$ns1" ping -q -c 1 10.0.0.12 > /dev/null; then
+		echo "ERROR: ping did not work, but it should (bridged)" 1>&2
+		return 1
+	fi
+
+	ip netns exec "$nsbr" ebtables -t filter -A FORWARD -p ipv4 --ip-protocol icmp -j DROP
+
+	# ping net${ns1}, expected to not work (DROP in bridge forward)
+	if ip netns exec "$ns1" ping -q -c 1 10.0.0.12 -W 0.5 > /dev/null 2>&1; then
+		echo "ERROR: ping works, should have failed (icmp forward drop)" 1>&2
+		return 1
+	fi
+
+	# re-activate brouter
+	ip netns exec "$nsbr" ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP
+
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.0.11 > /dev/null; then
+		echo "ERROR: ping did not work, but it should (broute+forward 2)" 1>&2
+		return 1
+	fi
+
+	echo "PASS: ${ns1}/${ns2} connectivity with active broute rule and bridge forward drop"
+	return 0
+}
+
+# test basic connectivity
+if ! ip netns exec "$ns1" ping -c 1 -q 10.0.0.12 > /dev/null; then
+    echo "ERROR: Could not reach ${ns2} from ${ns1}" 1>&2
+    exit 1
+fi
+
+if ! ip netns exec "$ns2" ping -c 1 -q 10.0.0.11 > /dev/null; then
+    echo "ERROR: Could not reach ${ns1} from ${ns2}" 1>&2
+    exit 1
+fi
+
+test_ebtables_broute
+exit $?
diff --git a/tools/testing/selftests/net/netfilter/config b/tools/testing/selftests/net/netfilter/config
new file mode 100644
index 000000000000..63ef80ef47a4
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/config
@@ -0,0 +1,89 @@
+CONFIG_AUDIT=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_NETFILTER=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_CGROUP_BPF=y
+CONFIG_DUMMY=m
+CONFIG_INET_ESP=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_SCTP=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IPV6=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_MACVLAN=m
+CONFIG_NAMESPACES=y
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_NET_NS=y
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_IPIP=m
+CONFIG_NET_VRF=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_NAT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_FLOW_TABLE=m
+CONFIG_NF_LOG_IPV4=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_REDIRECT=y
+CONFIG_NF_NAT_MASQUERADE=y
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_IPV4=y
+CONFIG_NF_TABLES_IPV6=y
+CONFIG_NF_TABLES_NETDEV=y
+CONFIG_NF_FLOW_TABLE_INET=m
+CONFIG_NFT_BRIDGE_META=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_FIB=m
+CONFIG_NFT_FIB_INET=m
+CONFIG_NFT_FIB_IPV4=m
+CONFIG_NFT_FIB_IPV6=m
+CONFIG_NFT_FLOW_OFFLOAD=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_NUMGEN=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_QUOTA=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_SYNPROXY=m
+CONFIG_VETH=m
+CONFIG_VLAN_8021Q=m
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_PKTGEN=m
+CONFIG_TUN=m
diff --git a/tools/testing/selftests/netfilter/connect_close.c b/tools/testing/selftests/net/netfilter/connect_close.c
index 1c3b0add54c4..1c3b0add54c4 100644
--- a/tools/testing/selftests/netfilter/connect_close.c
+++ b/tools/testing/selftests/net/netfilter/connect_close.c
diff --git a/tools/testing/selftests/netfilter/conntrack_dump_flush.c b/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c
index b11ea8ee6719..bd9317bf5ada 100644
--- a/tools/testing/selftests/netfilter/conntrack_dump_flush.c
+++ b/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c
@@ -10,7 +10,7 @@
 #include <linux/netfilter/nfnetlink.h>
 #include <linux/netfilter/nfnetlink_conntrack.h>
 #include <linux/netfilter/nf_conntrack_tcp.h>
-#include "../kselftest_harness.h"
+#include "../../kselftest_harness.h"
 
 #define TEST_ZONE_ID 123
 #define NF_CT_DEFAULT_ZONE_ID 0
@@ -313,13 +313,11 @@ FIXTURE_SETUP(conntrack_dump_flush)
 	self->sock = mnl_socket_open(NETLINK_NETFILTER);
 	if (!self->sock) {
 		perror("mnl_socket_open");
-		exit(EXIT_FAILURE);
+		SKIP(return, "cannot open netlink_netfilter socket");
 	}
 
-	if (mnl_socket_bind(self->sock, 0, MNL_SOCKET_AUTOPID) < 0) {
-		perror("mnl_socket_bind");
-		exit(EXIT_FAILURE);
-	}
+	ret = mnl_socket_bind(self->sock, 0, MNL_SOCKET_AUTOPID);
+	EXPECT_EQ(ret, 0);
 
 	ret = conntracK_count_zone(self->sock, TEST_ZONE_ID);
 	if (ret < 0 && errno == EPERM)
diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh
index 76645aaf2b58..c63d840ead61 100755
--- a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
+++ b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh
@@ -14,35 +14,32 @@
 # check the icmp errors are propagated to the correct host as per
 # nat of "established" icmp-echo "connection".
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
+source lib.sh
 
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
+if ! nft --version > /dev/null 2>&1;then
 	echo "SKIP: Could not run test without nft tool"
 	exit $ksft_skip
 fi
 
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
 cleanup() {
-	for i in 1 2;do ip netns del nsclient$i;done
-	for i in 1 2;do ip netns del nsrouter$i;done
+	cleanup_all_ns
 }
 
 trap cleanup EXIT
 
-ipv4() {
-    echo -n 192.168.$1.2
-}
+setup_ns nsclient1 nsclient2 nsrouter1 nsrouter2
+
+ret=0
+
+add_addr()
+{
+	ns=$1
+	dev=$2
+	i=$3
 
-ipv6 () {
-    echo -n dead:$1::2
+	ip -net "$ns" link set "$dev" up
+	ip -net "$ns" addr add "192.168.$i.2/24" dev "$dev"
+	ip -net "$ns" addr add "dead:$i::2/64" dev "$dev" nodad
 }
 
 check_counter()
@@ -52,10 +49,9 @@ check_counter()
 	expect=$3
 	local lret=0
 
-	cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns" nft list counter inet filter "$name" | grep -q "$expect"; then
 		echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2
-		ip netns exec $ns nft list counter inet filter "$name" 1>&2
+		ip netns exec "$ns" nft list counter inet filter "$name" 1>&2
 		lret=1
 	fi
 
@@ -65,9 +61,8 @@ check_counter()
 check_unknown()
 {
 	expect="packets 0 bytes 0"
-	for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
-		check_counter $n "unknown" "$expect"
-		if [ $? -ne 0 ] ;then
+	for n in ${nsclient1} ${nsclient2} ${nsrouter1} ${nsrouter2}; do
+		if ! check_counter "$n" "unknown" "$expect"; then
 			return 1
 		fi
 	done
@@ -75,61 +70,48 @@ check_unknown()
 	return 0
 }
 
-for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
-  ip netns add $n
-  ip -net $n link set lo up
-done
-
-DEV=veth0
-ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
 DEV=veth0
-ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
+ip link add "$DEV" netns "$nsclient1" type veth peer name eth1 netns "$nsrouter1"
+ip link add "$DEV" netns "$nsclient2" type veth peer name eth1 netns "$nsrouter2"
+ip link add "$DEV" netns "$nsrouter1" type veth peer name eth2 netns "$nsrouter2"
 
-DEV=veth0
-ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
+add_addr "$nsclient1" $DEV 1
+add_addr "$nsclient2" $DEV 2
 
-DEV=veth0
-for i in 1 2; do
-    ip -net nsclient$i link set $DEV up
-    ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
-    ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
-done
-
-ip -net nsrouter1 link set eth1 up
-ip -net nsrouter1 link set veth0 up
+ip -net "$nsrouter1" link set eth1 up
+ip -net "$nsrouter1" link set $DEV up
 
-ip -net nsrouter2 link set eth1 up
-ip -net nsrouter2 link set eth2 up
+ip -net "$nsrouter2" link set eth1 mtu 1280 up
+ip -net "$nsrouter2" link set eth2 up
 
-ip -net nsclient1 route add default via 192.168.1.1
-ip -net nsclient1 -6 route add default via dead:1::1
+ip -net "$nsclient1" route add default via 192.168.1.1
+ip -net "$nsclient1" -6 route add default via dead:1::1
 
-ip -net nsclient2 route add default via 192.168.2.1
-ip -net nsclient2 route add default via dead:2::1
+ip -net "$nsclient2" route add default via 192.168.2.1
+ip -net "$nsclient2" route add default via dead:2::1
+ip -net "$nsclient2" link set veth0 mtu 1280
 
-i=3
-ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1
-ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0
-ip -net nsrouter1 addr add dead:1::1/64 dev eth1
-ip -net nsrouter1 addr add dead:3::1/64 dev veth0
-ip -net nsrouter1 route add default via 192.168.3.10
-ip -net nsrouter1 -6 route add default via dead:3::10
+ip -net "$nsrouter1" addr add 192.168.1.1/24 dev eth1
+ip -net "$nsrouter1" addr add 192.168.3.1/24 dev veth0
+ip -net "$nsrouter1" addr add dead:1::1/64 dev eth1 nodad
+ip -net "$nsrouter1" addr add dead:3::1/64 dev veth0 nodad
+ip -net "$nsrouter1" route add default via 192.168.3.10
+ip -net "$nsrouter1" -6 route add default via dead:3::10
 
-ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1
-ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2
-ip -net nsrouter2 addr add dead:2::1/64 dev eth1
-ip -net nsrouter2 addr add dead:3::10/64 dev eth2
-ip -net nsrouter2 route add default via 192.168.3.1
-ip -net nsrouter2 route add default via dead:3::1
+ip -net "$nsrouter2" addr add 192.168.2.1/24 dev eth1
+ip -net "$nsrouter2" addr add 192.168.3.10/24 dev eth2
+ip -net "$nsrouter2" addr add dead:2::1/64  dev eth1 nodad
+ip -net "$nsrouter2" addr add dead:3::10/64 dev eth2 nodad
+ip -net "$nsrouter2" route add default via 192.168.3.1
+ip -net "$nsrouter2" route add default via dead:3::1
 
-sleep 2
 for i in 4 6; do
-	ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1
-	ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1
+	ip netns exec "$nsrouter1" sysctl -q net.ipv$i.conf.all.forwarding=1
+	ip netns exec "$nsrouter2" sysctl -q net.ipv$i.conf.all.forwarding=1
 done
 
-for netns in nsrouter1 nsrouter2; do
-ip netns exec $netns nft -f - <<EOF
+for netns in "$nsrouter1" "$nsrouter2"; do
+ip netns exec "$netns" nft -f - <<EOF
 table inet filter {
 	counter unknown { }
 	counter related { }
@@ -144,7 +126,7 @@ table inet filter {
 EOF
 done
 
-ip netns exec nsclient1 nft -f - <<EOF
+ip netns exec "$nsclient1" nft -f - <<EOF
 table inet filter {
 	counter unknown { }
 	counter related { }
@@ -164,7 +146,7 @@ table inet filter {
 }
 EOF
 
-ip netns exec nsclient2 nft -f - <<EOF
+ip netns exec "$nsclient2" nft -f - <<EOF
 table inet filter {
 	counter unknown { }
 	counter new { }
@@ -189,11 +171,10 @@ table inet filter {
 }
 EOF
 
-
 # make sure NAT core rewrites adress of icmp error if nat is used according to
 # conntrack nat information (icmp error will be directed at nsrouter1 address,
 # but it needs to be routed to nsclient1 address).
-ip netns exec nsrouter1 nft -f - <<EOF
+ip netns exec "$nsrouter1" nft -f - <<EOF
 table ip nat {
 	chain postrouting {
 		type nat hook postrouting priority 0; policy accept;
@@ -208,44 +189,32 @@ table ip6 nat {
 }
 EOF
 
-ip netns exec nsrouter2 ip link set eth1  mtu 1280
-ip netns exec nsclient2 ip link set veth0 mtu 1280
-sleep 1
-
-ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null
-if [ $? -ne 0 ]; then
+if ! ip netns exec "$nsclient1" ping -c 1 -s 1000 -q -M "do" 192.168.2.2 >/dev/null; then
 	echo "ERROR: netns ip routing/connectivity broken" 1>&2
-	cleanup
 	exit 1
 fi
-ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null
-if [ $? -ne 0 ]; then
+if ! ip netns exec "$nsclient1" ping -c 1 -s 1000 -q dead:2::2 >/dev/null; then
 	echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2
-	cleanup
 	exit 1
 fi
 
-check_unknown
-if [ $? -ne 0 ]; then
+if ! check_unknown; then
 	ret=1
 fi
 
 expect="packets 0 bytes 0"
-for netns in nsrouter1 nsrouter2 nsclient1;do
-	check_counter "$netns" "related" "$expect"
-	if [ $? -ne 0 ]; then
+for netns in "$nsrouter1" "$nsrouter2" "$nsclient1";do
+	if ! check_counter "$netns" "related" "$expect"; then
 		ret=1
 	fi
 done
 
 expect="packets 2 bytes 2076"
-check_counter nsclient2 "new" "$expect"
-if [ $? -ne 0 ]; then
+if ! check_counter "$nsclient2" "new" "$expect"; then
 	ret=1
 fi
 
-ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null
-if [ $? -eq 0 ]; then
+if ip netns exec "$nsclient1" ping -W 0.5 -q -c 1 -s 1300 -M "do" 192.168.2.2 > /dev/null; then
 	echo "ERROR: ping should have failed with PMTU too big error" 1>&2
 	ret=1
 fi
@@ -253,30 +222,26 @@ fi
 # nsrouter2 should have generated the icmp error, so
 # related counter should be 0 (its in forward).
 expect="packets 0 bytes 0"
-check_counter "nsrouter2" "related" "$expect"
-if [ $? -ne 0 ]; then
+if ! check_counter "$nsrouter2" "related" "$expect"; then
 	ret=1
 fi
 
 # but nsrouter1 should have seen it, same for nsclient1.
 expect="packets 1 bytes 576"
-for netns in nsrouter1 nsclient1;do
-	check_counter "$netns" "related" "$expect"
-	if [ $? -ne 0 ]; then
+for netns in ${nsrouter1} ${nsclient1};do
+	if ! check_counter "$netns" "related" "$expect"; then
 		ret=1
 	fi
 done
 
-ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null
-if [ $? -eq 0 ]; then
+if ip netns exec "${nsclient1}" ping6 -W 0.5 -c 1 -s 1300 dead:2::2 > /dev/null; then
 	echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2
 	ret=1
 fi
 
 expect="packets 2 bytes 1856"
-for netns in nsrouter1 nsclient1;do
-	check_counter "$netns" "related" "$expect"
-	if [ $? -ne 0 ]; then
+for netns in "${nsrouter1}" "${nsclient1}";do
+	if ! check_counter "$netns" "related" "$expect"; then
 		ret=1
 	fi
 done
@@ -288,21 +253,19 @@ else
 fi
 
 # add 'bad' route,  expect icmp REDIRECT to be generated
-ip netns exec nsclient1 ip route add 192.168.1.42 via 192.168.1.1
-ip netns exec nsclient1 ip route add dead:1::42 via dead:1::1
+ip netns exec "${nsclient1}" ip route add 192.168.1.42 via 192.168.1.1
+ip netns exec "${nsclient1}" ip route add dead:1::42 via dead:1::1
 
-ip netns exec "nsclient1" ping -q -c 2 192.168.1.42 > /dev/null
+ip netns exec "$nsclient1" ping -W 1 -q -i 0.5 -c 2 192.168.1.42 > /dev/null
 
 expect="packets 1 bytes 112"
-check_counter nsclient1 "redir4" "$expect"
-if [ $? -ne 0 ];then
+if ! check_counter "$nsclient1" "redir4" "$expect"; then
 	ret=1
 fi
 
-ip netns exec "nsclient1" ping -c 1 dead:1::42 > /dev/null
+ip netns exec "$nsclient1" ping -W 1 -c 1 dead:1::42 > /dev/null
 expect="packets 1 bytes 192"
-check_counter nsclient1 "redir6" "$expect"
-if [ $? -ne 0 ];then
+if ! check_counter "$nsclient1" "redir6" "$expect"; then
 	ret=1
 fi
 
diff --git a/tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh b/tools/testing/selftests/net/netfilter/conntrack_ipip_mtu.sh
index eb9553e4986b..9832a5d0198a 100755
--- a/tools/testing/selftests/netfilter/ipip-conntrack-mtu.sh
+++ b/tools/testing/selftests/net/netfilter/conntrack_ipip_mtu.sh
@@ -1,8 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
 
 # Conntrack needs to reassemble fragments in order to have complete
 # packets for rule matching.  Reassembly can lead to packet loss.
@@ -23,56 +22,44 @@ ksft_skip=4
 # between Client A and Client B over WAN. Wanrouter has MTU 1400 set
 # on its interfaces.
 
-rnd=$(mktemp -u XXXXXXXX)
 rx=$(mktemp)
 
-r_a="ns-ra-$rnd"
-r_b="ns-rb-$rnd"
-r_w="ns-rw-$rnd"
-c_a="ns-ca-$rnd"
-c_b="ns-cb-$rnd"
-
-checktool (){
-	if ! $1 > /dev/null 2>&1; then
-		echo "SKIP: Could not $2"
-		exit $ksft_skip
-	fi
-}
-
 checktool "iptables --version" "run test without iptables"
-checktool "ip -Version" "run test without ip tool"
-checktool "which socat" "run test without socat"
-checktool "ip netns add ${r_a}" "create net namespace"
+checktool "socat -h" "run test without socat"
 
-for n in ${r_b} ${r_w} ${c_a} ${c_b};do
-	ip netns add ${n}
-done
+setup_ns r_a r_b r_w c_a c_b
 
 cleanup() {
-	for n in ${r_a} ${r_b} ${r_w} ${c_a} ${c_b};do
-		ip netns del ${n}
-	done
-	rm -f ${rx}
+	cleanup_all_ns
+	rm -f "$rx"
 }
 
 trap cleanup EXIT
 
+listener_ready()
+{
+	ns="$1"
+	port="$2"
+	ss -N "$ns" -lnu -o "sport = :$port" | grep -q "$port"
+}
+
 test_path() {
 	msg="$1"
 
-	ip netns exec ${c_b} socat -t 3 - udp4-listen:5000,reuseaddr > ${rx} < /dev/null &
+	ip netns exec "$c_b" socat -t 3 - udp4-listen:5000,reuseaddr > "$rx" < /dev/null &
+
+	busywait $BUSYWAIT_TIMEOUT listener_ready "$c_b" 5000
 
-	sleep 1
 	for i in 1 2 3; do
 		head -c1400 /dev/zero | tr "\000" "a" | \
-			ip netns exec ${c_a} socat -t 1 -u STDIN UDP:192.168.20.2:5000
+			ip netns exec "$c_a" socat -t 1 -u STDIN UDP:192.168.20.2:5000
 	done
 
 	wait
 
-	bytes=$(wc -c < ${rx})
+	bytes=$(wc -c < "$rx")
 
-	if [ $bytes -eq 1400 ];then
+	if [ "$bytes" -eq 1400 ];then
 		echo "OK: PMTU $msg connection tracking"
 	else
 		echo "FAIL: PMTU $msg connection tracking: got $bytes, expected 1400"
@@ -91,24 +78,24 @@ test_path() {
 # 10.4.4.1 via 10.2.2.254      (Router B via Wanrouter)
 # No iptables rules at all.
 
-ip link add veth0 netns ${r_a} type veth peer name veth0 netns ${r_w}
-ip link add veth1 netns ${r_a} type veth peer name veth0 netns ${c_a}
+ip link add veth0 netns "$r_a" type veth peer name veth0 netns "$r_w"
+ip link add veth1 netns "$r_a" type veth peer name veth0 netns "$c_a"
 
 l_addr="10.2.2.1"
 r_addr="10.4.4.1"
-ip netns exec ${r_a} ip link add ipip0 type ipip local ${l_addr} remote ${r_addr} mode ipip || exit $ksft_skip
+ip netns exec "$r_a" ip link add ipip0 type ipip local "$l_addr" remote "$r_addr" mode ipip || exit $ksft_skip
 
 for dev in lo veth0 veth1 ipip0; do
-    ip -net ${r_a} link set $dev up
+    ip -net "$r_a" link set "$dev" up
 done
 
-ip -net ${r_a} addr add 10.2.2.1/24 dev veth0
-ip -net ${r_a} addr add 192.168.10.1/24 dev veth1
+ip -net "$r_a" addr add 10.2.2.1/24 dev veth0
+ip -net "$r_a" addr add 192.168.10.1/24 dev veth1
 
-ip -net ${r_a} route add 192.168.20.0/24 dev ipip0
-ip -net ${r_a} route add 10.4.4.0/24 via 10.2.2.254
+ip -net "$r_a" route add 192.168.20.0/24 dev ipip0
+ip -net "$r_a" route add 10.4.4.0/24 via 10.2.2.254
 
-ip netns exec ${r_a} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
+ip netns exec "$r_a" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
 
 # Detailed setup for Router B
 # ---------------------------
@@ -121,49 +108,46 @@ ip netns exec ${r_a} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
 # 10.2.2.1 via 10.4.4.254      (Router A via Wanrouter)
 # No iptables rules at all.
 
-ip link add veth0 netns ${r_b} type veth peer name veth1 netns ${r_w}
-ip link add veth1 netns ${r_b} type veth peer name veth0 netns ${c_b}
+ip link add veth0 netns "$r_b" type veth peer name veth1 netns "$r_w"
+ip link add veth1 netns "$r_b" type veth peer name veth0 netns "$c_b"
 
 l_addr="10.4.4.1"
 r_addr="10.2.2.1"
 
-ip netns exec ${r_b} ip link add ipip0 type ipip local ${l_addr} remote ${r_addr} mode ipip || exit $ksft_skip
+ip netns exec "$r_b" ip link add ipip0 type ipip local "${l_addr}" remote "${r_addr}" mode ipip || exit $ksft_skip
 
-for dev in lo veth0 veth1 ipip0; do
-	ip -net ${r_b} link set $dev up
+for dev in veth0 veth1 ipip0; do
+	ip -net "$r_b" link set $dev up
 done
 
-ip -net ${r_b} addr add 10.4.4.1/24 dev veth0
-ip -net ${r_b} addr add 192.168.20.1/24 dev veth1
+ip -net "$r_b" addr add 10.4.4.1/24 dev veth0
+ip -net "$r_b" addr add 192.168.20.1/24 dev veth1
 
-ip -net ${r_b} route add 192.168.10.0/24 dev ipip0
-ip -net ${r_b} route add 10.2.2.0/24 via 10.4.4.254
-ip netns exec ${r_b} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
+ip -net "$r_b" route add 192.168.10.0/24 dev ipip0
+ip -net "$r_b" route add 10.2.2.0/24 via 10.4.4.254
+ip netns exec "$r_b" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
 
 # Client A
-ip -net ${c_a} addr add 192.168.10.2/24 dev veth0
-ip -net ${c_a} link set dev lo up
-ip -net ${c_a} link set dev veth0 up
-ip -net ${c_a} route add default via 192.168.10.1
+ip -net "$c_a" addr add 192.168.10.2/24 dev veth0
+ip -net "$c_a" link set dev veth0 up
+ip -net "$c_a" route add default via 192.168.10.1
 
 # Client A
-ip -net ${c_b} addr add 192.168.20.2/24 dev veth0
-ip -net ${c_b} link set dev veth0 up
-ip -net ${c_b} link set dev lo up
-ip -net ${c_b} route add default via 192.168.20.1
+ip -net "$c_b" addr add 192.168.20.2/24 dev veth0
+ip -net "$c_b" link set dev veth0 up
+ip -net "$c_b" route add default via 192.168.20.1
 
 # Wan
-ip -net ${r_w} addr add 10.2.2.254/24 dev veth0
-ip -net ${r_w} addr add 10.4.4.254/24 dev veth1
+ip -net "$r_w" addr add 10.2.2.254/24 dev veth0
+ip -net "$r_w" addr add 10.4.4.254/24 dev veth1
 
-ip -net ${r_w} link set dev lo up
-ip -net ${r_w} link set dev veth0 up mtu 1400
-ip -net ${r_w} link set dev veth1 up mtu 1400
+ip -net "$r_w" link set dev veth0 up mtu 1400
+ip -net "$r_w" link set dev veth1 up mtu 1400
 
-ip -net ${r_a} link set dev veth0 mtu 1400
-ip -net ${r_b} link set dev veth0 mtu 1400
+ip -net "$r_a" link set dev veth0 mtu 1400
+ip -net "$r_b" link set dev veth0 mtu 1400
 
-ip netns exec ${r_w} sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
+ip netns exec "$r_w" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
 
 # Path MTU discovery
 # ------------------
@@ -203,5 +187,5 @@ test_path "without"
 #packet is too big (1400) for the tunnel PMTU (1380) to Router B, it is
 #dropped on Router A before sending.
 
-ip netns exec ${r_a} iptables -A FORWARD -m conntrack --ctstate NEW
+ip netns exec "$r_a" iptables -A FORWARD -m conntrack --ctstate NEW
 test_path "with"
diff --git a/tools/testing/selftests/net/netfilter/conntrack_sctp_collision.sh b/tools/testing/selftests/net/netfilter/conntrack_sctp_collision.sh
new file mode 100755
index 000000000000..d860f7d9744b
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/conntrack_sctp_collision.sh
@@ -0,0 +1,87 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Testing For SCTP COLLISION SCENARIO as Below:
+#
+#   14:35:47.655279 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [INIT] [init tag: 2017837359]
+#   14:35:48.353250 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [INIT] [init tag: 1187206187]
+#   14:35:48.353275 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [INIT ACK] [init tag: 2017837359]
+#   14:35:48.353283 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [COOKIE ECHO]
+#   14:35:48.353977 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [COOKIE ACK]
+#   14:35:48.855335 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [INIT ACK] [init tag: 164579970]
+#
+# TOPO: SERVER_NS (link0)<--->(link1) ROUTER_NS (link2)<--->(link3) CLIENT_NS
+
+source lib.sh
+
+CLIENT_IP="198.51.200.1"
+CLIENT_PORT=1234
+
+SERVER_IP="198.51.100.1"
+SERVER_PORT=1234
+
+CLIENT_GW="198.51.200.2"
+SERVER_GW="198.51.100.2"
+
+# setup the topo
+setup() {
+	setup_ns CLIENT_NS SERVER_NS ROUTER_NS
+	ip -n "$SERVER_NS" link add link0 type veth peer name link1 netns "$ROUTER_NS"
+	ip -n "$CLIENT_NS" link add link3 type veth peer name link2 netns "$ROUTER_NS"
+
+	ip -n "$SERVER_NS" link set link0 up
+	ip -n "$SERVER_NS" addr add $SERVER_IP/24 dev link0
+	ip -n "$SERVER_NS" route add $CLIENT_IP dev link0 via $SERVER_GW
+
+	ip -n "$ROUTER_NS" link set link1 up
+	ip -n "$ROUTER_NS" link set link2 up
+	ip -n "$ROUTER_NS" addr add $SERVER_GW/24 dev link1
+	ip -n "$ROUTER_NS" addr add $CLIENT_GW/24 dev link2
+	ip net exec "$ROUTER_NS" sysctl -wq net.ipv4.ip_forward=1
+
+	ip -n "$CLIENT_NS" link set link3 up
+	ip -n "$CLIENT_NS" addr add $CLIENT_IP/24 dev link3
+	ip -n "$CLIENT_NS" route add $SERVER_IP dev link3 via $CLIENT_GW
+
+	# simulate the delay on OVS upcall by setting up a delay for INIT_ACK with
+	# tc on $SERVER_NS side
+	tc -n "$SERVER_NS" qdisc add dev link0 root handle 1: htb r2q 64
+	tc -n "$SERVER_NS" class add dev link0 parent 1: classid 1:1 htb rate 100mbit
+	tc -n "$SERVER_NS" filter add dev link0 parent 1: protocol ip u32 match ip protocol 132 \
+		0xff match u8 2 0xff at 32 flowid 1:1
+	if ! tc -n "$SERVER_NS" qdisc add dev link0 parent 1:1 handle 10: netem delay 1200ms; then
+		echo "SKIP: Cannot add netem qdisc"
+		exit $ksft_skip
+	fi
+
+	# simulate the ctstate check on OVS nf_conntrack
+	ip net exec "$ROUTER_NS" iptables -A FORWARD -m state --state INVALID,UNTRACKED -j DROP
+	ip net exec "$ROUTER_NS" iptables -A INPUT -p sctp -j DROP
+
+	# use a smaller number for assoc's max_retrans to reproduce the issue
+	modprobe -q sctp
+	ip net exec "$CLIENT_NS" sysctl -wq net.sctp.association_max_retrans=3
+}
+
+cleanup() {
+	ip net exec "$CLIENT_NS" pkill sctp_collision >/dev/null 2>&1
+	ip net exec "$SERVER_NS" pkill sctp_collision >/dev/null 2>&1
+	cleanup_all_ns
+}
+
+do_test() {
+	ip net exec "$SERVER_NS" ./sctp_collision server \
+		$SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT &
+	ip net exec "$CLIENT_NS" ./sctp_collision client \
+		$CLIENT_IP $CLIENT_PORT $SERVER_IP $SERVER_PORT
+}
+
+# NOTE: one way to work around the issue is set a smaller hb_interval
+# ip net exec $CLIENT_NS sysctl -wq net.sctp.hb_interval=3500
+
+# run the test case
+trap cleanup EXIT
+setup && \
+echo "Test for SCTP Collision in nf_conntrack:" && \
+do_test && echo "PASS!"
+exit $?
diff --git a/tools/testing/selftests/net/netfilter/conntrack_tcp_unreplied.sh b/tools/testing/selftests/net/netfilter/conntrack_tcp_unreplied.sh
new file mode 100755
index 000000000000..121ea93c0178
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/conntrack_tcp_unreplied.sh
@@ -0,0 +1,164 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Check that UNREPLIED tcp conntrack will eventually timeout.
+#
+
+source lib.sh
+
+if ! nft --version > /dev/null 2>&1;then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+if ! conntrack --version > /dev/null 2>&1;then
+	echo "SKIP: Could not run test without conntrack tool"
+	exit $ksft_skip
+fi
+
+ret=0
+
+cleanup() {
+	ip netns pids "$ns1" | xargs kill 2>/dev/null
+	ip netns pids "$ns2" | xargs kill 2>/dev/null
+
+	cleanup_all_ns
+}
+
+ipv4() {
+    echo -n 192.168."$1".2
+}
+
+check_counter()
+{
+	ns=$1
+	name=$2
+	expect=$3
+	local lret=0
+
+	if ! ip netns exec "$ns2" nft list counter inet filter "$name" | grep -q "$expect"; then
+		echo "ERROR: counter $name in $ns2 has unexpected value (expected $expect)" 1>&2
+		ip netns exec "$ns2" nft list counter inet filter "$name" 1>&2
+		lret=1
+	fi
+
+	return $lret
+}
+
+trap cleanup EXIT
+
+# Create test namespaces
+setup_ns ns1 ns2
+
+# Connect the namespace to the host using a veth pair
+ip -net "$ns1" link add name veth1 type veth peer name veth2
+ip -net "$ns1" link set netns "$ns2" dev veth2
+
+ip -net "$ns1" link set up dev lo
+ip -net "$ns2" link set up dev lo
+ip -net "$ns1" link set up dev veth1
+ip -net "$ns2" link set up dev veth2
+
+ip -net "$ns2" addr add 10.11.11.2/24 dev veth2
+ip -net "$ns2" route add default via 10.11.11.1
+
+ip netns exec "$ns2" sysctl -q net.ipv4.conf.veth2.forwarding=1
+
+# add a rule inside NS so we enable conntrack
+ip netns exec "$ns1" nft -f - <<EOF
+table inet filter {
+	chain input {
+		type filter hook input priority 0; policy accept;
+		ct state established accept
+	}
+}
+EOF
+
+ip -net "$ns1" addr add 10.11.11.1/24 dev veth1
+ip -net "$ns1" route add 10.99.99.99 via 10.11.11.2
+
+# Check connectivity works
+ip netns exec "$ns1" ping -q -c 2 10.11.11.2 >/dev/null || exit 1
+
+ip netns exec "$ns2" socat -u -4 TCP-LISTEN:8080,reuseaddr STDOUT &
+
+ip netns exec "$ns2" nft -f - <<EOF
+table inet filter {
+	counter connreq { }
+	counter redir { }
+	chain input {
+		type filter hook input priority 0; policy accept;
+		ct state new tcp flags syn ip daddr 10.99.99.99 tcp dport 80 counter name "connreq" accept
+		ct state new ct status dnat tcp dport 8080 counter name "redir" accept
+	}
+}
+EOF
+if [ $? -ne 0 ]; then
+	echo "ERROR: Could not load nft rules"
+	exit 1
+fi
+
+ip netns exec "$ns2" sysctl -q net.netfilter.nf_conntrack_tcp_timeout_syn_sent=10
+
+echo "INFO: connect $ns1 -> $ns2 to the virtual ip"
+ip netns exec "$ns1" bash -c 'for i in $(seq 1 $BUSYWAIT_TIMEOUT) ; do
+	socat -u STDIN TCP:10.99.99.99:80 < /dev/null
+	sleep 0.1
+	done' &
+
+wait_for_attempt()
+{
+	count=$(ip netns exec "$ns2" conntrack -L -p tcp --dport 80 2>/dev/null | wc -l)
+	if [ "$count" -gt 0 ]; then
+		return 0
+	fi
+
+	return 1
+}
+
+# wait for conntrack to pick the new connection request up before loading
+# the nat redirect rule.
+if ! busywait "$BUSYWAIT_TIMEOUT" wait_for_attempt; then
+	echo "ERROR: $ns2 did not pick up tcp connection from peer"
+	exit 1
+fi
+
+ip netns exec "$ns2" nft -f - <<EOF
+table inet nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		ip daddr 10.99.99.99 tcp dport 80 redirect to :8080
+	}
+}
+EOF
+if [ $? -ne 0 ]; then
+	echo "ERROR: Could not load nat redirect"
+	exit 1
+fi
+
+wait_for_redirect()
+{
+	count=$(ip netns exec "$ns2" conntrack -L -p tcp --reply-port-src 8080 2>/dev/null | wc -l)
+	if [ "$count" -gt 0 ]; then
+		return 0
+	fi
+
+	return 1
+}
+echo "INFO: NAT redirect added in ns $ns2, waiting for $BUSYWAIT_TIMEOUT ms for nat to take effect"
+
+busywait "$BUSYWAIT_TIMEOUT" wait_for_redirect
+ret=$?
+
+expect="packets 1 bytes 60"
+if ! check_counter "$ns2" "redir" "$expect"; then
+	ret=1
+fi
+
+if [ $ret -eq 0 ];then
+	echo "PASS: redirection counter has expected values"
+else
+	echo "ERROR: no tcp connection was redirected"
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/conntrack_vrf.sh b/tools/testing/selftests/net/netfilter/conntrack_vrf.sh
index 8b5ea9234588..073e8e62d350 100755
--- a/tools/testing/selftests/netfilter/conntrack_vrf.sh
+++ b/tools/testing/selftests/net/netfilter/conntrack_vrf.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # This script demonstrates interaction of conntrack and vrf.
 # The vrf driver calls the netfilter hooks again, with oif/iif
@@ -28,84 +28,67 @@
 # that was supposed to be fixed by the commit mentioned above to make sure
 # that any fix to test case 1 won't break masquerade again.
 
-ksft_skip=4
+source lib.sh
 
 IP0=172.30.30.1
 IP1=172.30.30.2
 PFXL=30
 ret=0
 
-sfx=$(mktemp -u "XXXXXXXX")
-ns0="ns0-$sfx"
-ns1="ns1-$sfx"
-
 cleanup()
 {
 	ip netns pids $ns0 | xargs kill 2>/dev/null
 	ip netns pids $ns1 | xargs kill 2>/dev/null
 
-	ip netns del $ns0 $ns1
+	cleanup_all_ns
 }
 
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-ip netns add "$ns0"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace $ns0"
-	exit $ksft_skip
-fi
-ip netns add "$ns1"
+checktool "nft --version" "run test without nft"
+checktool "conntrack --version" "run test without conntrack"
+checktool "socat -h" "run test without socat"
 
 trap cleanup EXIT
 
-ip netns exec $ns0 sysctl -q -w net.ipv4.conf.default.rp_filter=0
-ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
-ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+setup_ns ns0 ns1
+
+ip netns exec "$ns0" sysctl -q -w net.ipv4.conf.default.rp_filter=0
+ip netns exec "$ns0" sysctl -q -w net.ipv4.conf.all.rp_filter=0
+ip netns exec "$ns0" sysctl -q -w net.ipv4.conf.all.rp_filter=0
 
-ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1
-if [ $? -ne 0 ];then
+if ! ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1; then
 	echo "SKIP: Could not add veth device"
 	exit $ksft_skip
 fi
 
-ip -net $ns0 li add tvrf type vrf table 9876
-if [ $? -ne 0 ];then
+if ! ip -net "$ns0" li add tvrf type vrf table 9876; then
 	echo "SKIP: Could not add vrf device"
 	exit $ksft_skip
 fi
 
-ip -net $ns0 li set lo up
+ip -net "$ns0" li set veth0 master tvrf
+ip -net "$ns0" li set tvrf up
+ip -net "$ns0" li set veth0 up
+ip -net "$ns1" li set veth0 up
 
-ip -net $ns0 li set veth0 master tvrf
-ip -net $ns0 li set tvrf up
-ip -net $ns0 li set veth0 up
-ip -net $ns1 li set veth0 up
+ip -net "$ns0" addr add $IP0/$PFXL dev veth0
+ip -net "$ns1" addr add $IP1/$PFXL dev veth0
 
-ip -net $ns0 addr add $IP0/$PFXL dev veth0
-ip -net $ns1 addr add $IP1/$PFXL dev veth0
+listener_ready()
+{
+        local ns="$1"
 
-ip netns exec $ns1 iperf3 -s > /dev/null 2>&1&
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not start iperf3"
-	exit $ksft_skip
-fi
+        ss -N "$ns" -l -n -t -o "sport = :55555" | grep -q "55555"
+}
+
+ip netns exec "$ns1" socat -u -4 TCP-LISTEN:55555,reuseaddr,fork STDOUT > /dev/null &
+busywait $BUSYWAIT_TIMEOUT listener_ready "$ns1"
 
 # test vrf ingress handling.
 # The incoming connection should be placed in conntrack zone 1,
 # as decided by the first iteration of the ruleset.
 test_ct_zone_in()
 {
-ip netns exec $ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
 table testct {
 	chain rawpre {
 		type filter hook prerouting priority raw;
@@ -126,21 +109,21 @@ table testct {
 	}
 }
 EOF
-	ip netns exec $ns1 ping -W 1 -c 1 -I veth0 $IP0 > /dev/null
+	ip netns exec "$ns1" ping -W 1 -c 1 -I veth0 "$IP0" > /dev/null
 
 	# should be in zone 1, not zone 2
-	count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l)
-	if [ $count -eq 1 ]; then
+	count=$(ip netns exec "$ns0" conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l)
+	if [ "$count" -eq 1 ]; then
 		echo "PASS: entry found in conntrack zone 1"
 	else
 		echo "FAIL: entry not found in conntrack zone 1"
-		count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l)
-		if [ $count -eq 1 ]; then
+		count=$(ip netns exec "$ns0" conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l)
+		if [ "$count" -eq 1 ]; then
 			echo "FAIL: entry found in zone 2 instead"
 		else
 			echo "FAIL: entry not in zone 1 or 2, dumping table"
-			ip netns exec $ns0 conntrack -L
-			ip netns exec $ns0 nft list ruleset
+			ip netns exec "$ns0" conntrack -L
+			ip netns exec "$ns0" nft list ruleset
 		fi
 	fi
 }
@@ -153,12 +136,12 @@ test_masquerade_vrf()
 	local qdisc=$1
 
 	if [ "$qdisc" != "default" ]; then
-		tc -net $ns0 qdisc add dev tvrf root $qdisc
+		tc -net "$ns0" qdisc add dev tvrf root "$qdisc"
 	fi
 
-	ip netns exec $ns0 conntrack -F 2>/dev/null
+	ip netns exec "$ns0" conntrack -F 2>/dev/null
 
-ip netns exec $ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f - <<EOF
 flush ruleset
 table ip nat {
 	chain rawout {
@@ -179,25 +162,23 @@ table ip nat {
 	}
 }
 EOF
-	ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 >/dev/null
-	if [ $? -ne 0 ]; then
-		echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on vrf device"
+	if ! ip netns exec "$ns0" ip vrf exec tvrf socat -u -4 STDIN TCP:"$IP1":55555 < /dev/null > /dev/null;then
+		echo "FAIL: connect failure with masquerade + sport rewrite on vrf device"
 		ret=1
 		return
 	fi
 
 	# must also check that nat table was evaluated on second (lower device) iteration.
-	ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' &&
-	ip netns exec $ns0 nft list table ip nat |grep -q 'untracked counter packets [1-9]'
-	if [ $? -eq 0 ]; then
-		echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)"
+	if ip netns exec "$ns0" nft list table ip nat |grep -q 'counter packets 1' &&
+	   ip netns exec "$ns0" nft list table ip nat |grep -q 'untracked counter packets [1-9]'; then
+		echo "PASS: connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)"
 	else
 		echo "FAIL: vrf rules have unexpected counter value"
 		ret=1
 	fi
 
 	if [ "$qdisc" != "default" ]; then
-		tc -net $ns0 qdisc del dev tvrf root
+		tc -net "$ns0" qdisc del dev tvrf root
 	fi
 }
 
@@ -206,8 +187,8 @@ EOF
 # oifname is the lower device (veth0 in this case).
 test_masquerade_veth()
 {
-	ip netns exec $ns0 conntrack -F 2>/dev/null
-ip netns exec $ns0 nft -f - <<EOF
+	ip netns exec "$ns0" conntrack -F 2>/dev/null
+ip netns exec "$ns0" nft -f - <<EOF
 flush ruleset
 table ip nat {
 	chain postrouting {
@@ -216,17 +197,15 @@ table ip nat {
 	}
 }
 EOF
-	ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 > /dev/null
-	if [ $? -ne 0 ]; then
-		echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on veth device"
+	if ! ip netns exec "$ns0" ip vrf exec tvrf socat -u -4 STDIN TCP:"$IP1":55555 < /dev/null > /dev/null;then
+		echo "FAIL: connect failure with masquerade + sport rewrite on veth device"
 		ret=1
 		return
 	fi
 
 	# must also check that nat table was evaluated on second (lower device) iteration.
-	ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
-	if [ $? -eq 0 ]; then
-		echo "PASS: iperf3 connect with masquerade + sport rewrite on veth device"
+	if ip netns exec "$ns0" nft list table ip nat |grep -q 'counter packets 1'; then
+		echo "PASS: connect with masquerade + sport rewrite on veth device"
 	else
 		echo "FAIL: vrf masq rule has unexpected counter value"
 		ret=1
diff --git a/tools/testing/selftests/net/netfilter/ipvs.sh b/tools/testing/selftests/net/netfilter/ipvs.sh
new file mode 100755
index 000000000000..4ceee9fb3949
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/ipvs.sh
@@ -0,0 +1,211 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# End-to-end ipvs test suite
+# Topology:
+#--------------------------------------------------------------+
+#                      |                                       |
+#         ns0          |         ns1                           |
+#      -----------     |     -----------    -----------        |
+#      | veth01  | --------- | veth10  |    | veth12  |        |
+#      -----------    peer   -----------    -----------        |
+#           |          |                        |              |
+#      -----------     |                        |              |
+#      |  br0    |     |-----------------  peer |--------------|
+#      -----------     |                        |              |
+#           |          |                        |              |
+#      ----------     peer   ----------      -----------       |
+#      |  veth02 | --------- |  veth20 |     | veth21  |       |
+#      ----------      |     ----------      -----------       |
+#                      |         ns2                           |
+#                      |                                       |
+#--------------------------------------------------------------+
+#
+# We assume that all network driver are loaded
+#
+
+source lib.sh
+
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+readonly port=8080
+
+readonly vip_v4=207.175.44.110
+readonly cip_v4=10.0.0.2
+readonly gip_v4=10.0.0.1
+readonly dip_v4=172.16.0.1
+readonly rip_v4=172.16.0.2
+readonly sip_v4=10.0.0.3
+
+readonly infile="$(mktemp)"
+readonly outfile="$(mktemp)"
+readonly datalen=32
+
+sysipvsnet="/proc/sys/net/ipv4/vs/"
+if [ ! -d $sysipvsnet ]; then
+	if ! modprobe -q ip_vs; then
+		echo "skip: could not run test without ipvs module"
+		exit $ksft_skip
+	fi
+fi
+
+checktool "ipvsadm -v" "run test without ipvsadm"
+checktool "socat -h" "run test without socat"
+
+setup() {
+	setup_ns ns0 ns1 ns2
+
+	ip link add veth01 netns "${ns0}" type veth peer name veth10 netns "${ns1}"
+	ip link add veth02 netns "${ns0}" type veth peer name veth20 netns "${ns2}"
+	ip link add veth12 netns "${ns1}" type veth peer name veth21 netns "${ns2}"
+
+	ip netns exec "${ns0}" ip link set veth01 up
+	ip netns exec "${ns0}" ip link set veth02 up
+	ip netns exec "${ns0}" ip link add br0 type bridge
+	ip netns exec "${ns0}" ip link set veth01 master br0
+	ip netns exec "${ns0}" ip link set veth02 master br0
+	ip netns exec "${ns0}" ip link set br0 up
+	ip netns exec "${ns0}" ip addr add "${cip_v4}/24" dev br0
+
+	ip netns exec "${ns1}" ip link set veth10 up
+	ip netns exec "${ns1}" ip addr add "${gip_v4}/24" dev veth10
+	ip netns exec "${ns1}" ip link set veth12 up
+	ip netns exec "${ns1}" ip addr add "${dip_v4}/24" dev veth12
+
+	ip netns exec "${ns2}" ip link set veth21 up
+	ip netns exec "${ns2}" ip addr add "${rip_v4}/24" dev veth21
+	ip netns exec "${ns2}" ip link set veth20 up
+	ip netns exec "${ns2}" ip addr add "${sip_v4}/24" dev veth20
+
+	sleep 1
+
+	dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none
+}
+
+cleanup() {
+	cleanup_all_ns
+
+	if [ -f "${outfile}" ]; then
+		rm "${outfile}"
+	fi
+	if [ -f "${infile}" ]; then
+		rm "${infile}"
+	fi
+}
+
+server_listen() {
+	ip netns exec "$ns2" socat -u -4 TCP-LISTEN:8080,reuseaddr STDOUT > "${outfile}" &
+	server_pid=$!
+	sleep 0.2
+}
+
+client_connect() {
+	ip netns exec "${ns0}" timeout 2 socat -u -4 STDIN TCP:"${vip_v4}":"${port}" < "${infile}"
+}
+
+verify_data() {
+	wait "${server_pid}"
+	cmp "$infile" "$outfile" 2>/dev/null
+}
+
+test_service() {
+	server_listen
+	client_connect
+	verify_data
+}
+
+
+test_dr() {
+	ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0
+
+	ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec "${ns1}" ipvsadm -A -t "${vip_v4}:${port}" -s rr
+	ip netns exec "${ns1}" ipvsadm -a -t "${vip_v4}:${port}" -r "${rip_v4}:${port}"
+	ip netns exec "${ns1}" ip addr add "${vip_v4}/32" dev lo:1
+
+	# avoid incorrect arp response
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_ignore=1
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_announce=2
+	# avoid reverse route lookup
+	ip netns exec "${ns2}" sysctl -qw  net.ipv4.conf.all.rp_filter=0
+	ip netns exec "${ns2}" sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
+	ip netns exec "${ns2}" ip addr add "${vip_v4}/32" dev lo:1
+
+	test_service
+}
+
+test_nat() {
+	ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0
+
+	ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec "${ns1}" ipvsadm -A -t "${vip_v4}:${port}" -s rr
+	ip netns exec "${ns1}" ipvsadm -a -m -t "${vip_v4}:${port}" -r "${rip_v4}:${port}"
+	ip netns exec "${ns1}" ip addr add "${vip_v4}/32" dev lo:1
+
+	ip netns exec "${ns2}" ip link del veth20
+	ip netns exec "${ns2}" ip route add default via "${dip_v4}" dev veth21
+
+	test_service
+}
+
+test_tun() {
+	ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0
+
+	ip netns exec "${ns1}" modprobe -q ipip
+	ip netns exec "${ns1}" ip link set tunl0 up
+	ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=0
+	ip netns exec "${ns1}" sysctl -qw net.ipv4.conf.all.send_redirects=0
+	ip netns exec "${ns1}" sysctl -qw net.ipv4.conf.default.send_redirects=0
+	ip netns exec "${ns1}" ipvsadm -A -t "${vip_v4}:${port}" -s rr
+	ip netns exec "${ns1}" ipvsadm -a -i -t "${vip_v4}:${port}" -r ${rip_v4}:${port}
+	ip netns exec "${ns1}" ip addr add ${vip_v4}/32 dev lo:1
+
+	ip netns exec "${ns2}" modprobe -q ipip
+	ip netns exec "${ns2}" ip link set tunl0 up
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_ignore=1
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_announce=2
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.tunl0.rp_filter=0
+	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.veth21.rp_filter=0
+	ip netns exec "${ns2}" ip addr add "${vip_v4}/32" dev lo:1
+
+	test_service
+}
+
+run_tests() {
+	local errors=
+
+	echo "Testing DR mode..."
+	cleanup
+	setup
+	test_dr
+	errors=$(( $errors + $? ))
+
+	echo "Testing NAT mode..."
+	cleanup
+	setup
+	test_nat
+	errors=$(( $errors + $? ))
+
+	echo "Testing Tunnel mode..."
+	cleanup
+	setup
+	test_tun
+	errors=$(( $errors + $? ))
+
+	return $errors
+}
+
+trap cleanup EXIT
+
+run_tests
+
+if [ $? -ne 0 ]; then
+	echo -e "$(basename $0): ${RED}FAIL${NC}"
+	exit 1
+fi
+echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0
diff --git a/tools/testing/selftests/net/netfilter/lib.sh b/tools/testing/selftests/net/netfilter/lib.sh
new file mode 100644
index 000000000000..bedd35298e15
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/lib.sh
@@ -0,0 +1,10 @@
+net_netfilter_dir=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "$net_netfilter_dir/../lib.sh"
+
+checktool (){
+	if ! $1 > /dev/null 2>&1; then
+		echo "SKIP: Could not $2"
+		exit $ksft_skip
+	fi
+}
diff --git a/tools/testing/selftests/net/netfilter/nf_conntrack_packetdrill.sh b/tools/testing/selftests/net/netfilter/nf_conntrack_packetdrill.sh
new file mode 100755
index 000000000000..c6fdd2079f4d
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nf_conntrack_packetdrill.sh
@@ -0,0 +1,71 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+source lib.sh
+
+checktool "conntrack --version" "run test without conntrack"
+checktool "iptables --version" "run test without iptables"
+checktool "ip6tables --version" "run test without ip6tables"
+
+modprobe -q tun
+modprobe -q nf_conntrack
+# echo 1 > /proc/sys/net/netfilter/nf_log_all_netns
+
+PDRILL_TIMEOUT=10
+
+files="
+conntrack_ack_loss_stall.pkt
+conntrack_inexact_rst.pkt
+conntrack_syn_challenge_ack.pkt
+conntrack_synack_old.pkt
+conntrack_synack_reuse.pkt
+conntrack_rst_invalid.pkt
+"
+
+if ! packetdrill --dry_run --verbose "packetdrill/conntrack_ack_loss_stall.pkt";then
+	echo "SKIP: packetdrill not installed"
+	exit ${ksft_skip}
+fi
+
+ret=0
+
+run_packetdrill()
+{
+	filename="$1"
+	ipver="$2"
+	local mtu=1500
+
+	export NFCT_IP_VERSION="$ipver"
+
+	if [ "$ipver" = "ipv4" ];then
+		export xtables="iptables"
+	elif [ "$ipver" = "ipv6" ];then
+		export xtables="ip6tables"
+		mtu=1520
+	fi
+
+	timeout "$PDRILL_TIMEOUT" unshare -n packetdrill --ip_version="$ipver" --mtu=$mtu \
+		--tolerance_usecs=1000000 --non_fatal packet "$filename"
+}
+
+run_one_test_file()
+{
+	filename="$1"
+
+	for v in ipv4 ipv6;do
+		printf "%-50s(%s)%-20s" "$filename" "$v" ""
+		if run_packetdrill packetdrill/"$f" "$v";then
+			echo OK
+		else
+			echo FAIL
+			ret=1
+		fi
+	done
+}
+
+echo "Replaying packetdrill test cases:"
+for f in $files;do
+	run_one_test_file packetdrill/"$f"
+done
+
+exit $ret
diff --git a/tools/testing/selftests/net/netfilter/nf_nat_edemux.sh b/tools/testing/selftests/net/netfilter/nf_nat_edemux.sh
new file mode 100755
index 000000000000..1014551dd769
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nf_nat_edemux.sh
@@ -0,0 +1,97 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test NAT source port clash resolution
+#
+
+source lib.sh
+ret=0
+socatpid=0
+
+cleanup()
+{
+	[ "$socatpid" -gt 0 ] && kill "$socatpid"
+
+	cleanup_all_ns
+}
+
+checktool "socat -h" "run test without socat"
+checktool "iptables --version" "run test without iptables"
+
+trap cleanup EXIT
+
+setup_ns ns1 ns2
+
+# Connect the namespaces using a veth pair
+ip link add name veth2 type veth peer name veth1
+ip link set netns "$ns1" dev veth1
+ip link set netns "$ns2" dev veth2
+
+ip netns exec "$ns1" ip link set up dev lo
+ip netns exec "$ns1" ip link set up dev veth1
+ip netns exec "$ns1" ip addr add 192.168.1.1/24 dev veth1
+
+ip netns exec "$ns2" ip link set up dev lo
+ip netns exec "$ns2" ip link set up dev veth2
+ip netns exec "$ns2" ip addr add 192.168.1.2/24 dev veth2
+
+# Create a server in one namespace
+ip netns exec "$ns1" socat -u TCP-LISTEN:5201,fork OPEN:/dev/null,wronly=1 &
+socatpid=$!
+
+# Restrict source port to just one so we don't have to exhaust
+# all others.
+ip netns exec "$ns2" sysctl -q net.ipv4.ip_local_port_range="10000 10000"
+
+# add a virtual IP using DNAT
+ip netns exec "$ns2" iptables -t nat -A OUTPUT -d 10.96.0.1/32 -p tcp --dport 443 -j DNAT --to-destination 192.168.1.1:5201
+
+# ... and route it to the other namespace
+ip netns exec "$ns2" ip route add 10.96.0.1 via 192.168.1.1
+
+# add a persistent connection from the other namespace
+ip netns exec "$ns2" socat -t 10 - TCP:192.168.1.1:5201 > /dev/null &
+
+sleep 1
+
+# ip daddr:dport will be rewritten to 192.168.1.1 5201
+# NAT must reallocate source port 10000 because
+# 192.168.1.2:10000 -> 192.168.1.1:5201 is already in use
+echo test | ip netns exec "$ns2" socat -t 3 -u STDIN TCP:10.96.0.1:443,connect-timeout=3 >/dev/null
+ret=$?
+
+# Check socat can connect to 10.96.0.1:443 (aka 192.168.1.1:5201).
+if [ $ret -eq 0 ]; then
+	echo "PASS: socat can connect via NAT'd address"
+else
+	echo "FAIL: socat cannot connect via NAT'd address"
+fi
+
+# check sport clashres.
+ip netns exec "$ns1" iptables -t nat -A PREROUTING -p tcp --dport 5202 -j REDIRECT --to-ports 5201
+ip netns exec "$ns1" iptables -t nat -A PREROUTING -p tcp --dport 5203 -j REDIRECT --to-ports 5201
+
+sleep 5 | ip netns exec "$ns2" socat -t 5 -u STDIN TCP:192.168.1.1:5202,connect-timeout=5 >/dev/null &
+
+# if connect succeeds, client closes instantly due to EOF on stdin.
+# if connect hangs, it will time out after 5s.
+echo | ip netns exec "$ns2" socat -t 3 -u STDIN TCP:192.168.1.1:5203,connect-timeout=5 >/dev/null &
+cpid2=$!
+
+time_then=$(date +%s)
+wait $cpid2
+rv=$?
+time_now=$(date +%s)
+
+# Check how much time has elapsed, expectation is for
+# 'cpid2' to connect and then exit (and no connect delay).
+delta=$((time_now - time_then))
+
+if [ $delta -lt 2 ] && [ $rv -eq 0 ]; then
+	echo "PASS: could connect to service via redirected ports"
+else
+	echo "FAIL: socat cannot connect to service via redirect ($delta seconds elapsed, returned $rv)"
+	ret=1
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nf-queue.c b/tools/testing/selftests/net/netfilter/nf_queue.c
index 9e56b9d47037..9e56b9d47037 100644
--- a/tools/testing/selftests/netfilter/nf-queue.c
+++ b/tools/testing/selftests/net/netfilter/nf_queue.c
diff --git a/tools/testing/selftests/netfilter/nft_audit.sh b/tools/testing/selftests/net/netfilter/nft_audit.sh
index 99ed5bd6e840..902f8114bc80 100755
--- a/tools/testing/selftests/netfilter/nft_audit.sh
+++ b/tools/testing/selftests/net/netfilter/nft_audit.sh
@@ -6,11 +6,34 @@
 SKIP_RC=4
 RC=0
 
+if [ -r /var/run/auditd.pid ];then
+	read pid < /var/run/auditd.pid
+	p=$(pgrep ^auditd$)
+
+	if [ "$pid" -eq "$p" ]; then
+		echo "SKIP: auditd is running"
+		exit $SKIP_RC
+	fi
+fi
+
 nft --version >/dev/null 2>&1 || {
 	echo "SKIP: missing nft tool"
 	exit $SKIP_RC
 }
 
+# nft must be recent enough to support "reset" keyword.
+nft --check -f /dev/stdin >/dev/null 2>&1 <<EOF
+add table t
+add chain t c
+reset rules t c
+EOF
+
+if [ "$?" -ne 0 ];then
+	echo -n "SKIP: nft reset feature test failed: "
+	nft --version
+	exit $SKIP_RC
+fi
+
 # Run everything in a separate network namespace
 [ "${1}" != "run" ] && { unshare -n "${0}" run; exit $?; }
 
@@ -73,7 +96,7 @@ done
 
 for ((i = 0; i < 500; i++)); do
 	echo "add rule t2 c3 counter accept comment \"rule $i\""
-done >$rulefile
+done > "$rulefile"
 do_test "nft -f $rulefile" \
 'table=t2 family=2 entries=500 op=nft_register_rule'
 
@@ -101,7 +124,7 @@ do_test 'nft add counter t2 c1; add counter t2 c2' \
 
 for ((i = 3; i <= 500; i++)); do
 	echo "add counter t2 c$i"
-done >$rulefile
+done > "$rulefile"
 do_test "nft -f $rulefile" \
 'table=t2 family=2 entries=498 op=nft_register_obj'
 
@@ -115,7 +138,7 @@ do_test 'nft add quota t2 q1 { 10 bytes }; add quota t2 q2 { 10 bytes }' \
 
 for ((i = 3; i <= 500; i++)); do
 	echo "add quota t2 q$i { 10 bytes }"
-done >$rulefile
+done > "$rulefile"
 do_test "nft -f $rulefile" \
 'table=t2 family=2 entries=498 op=nft_register_obj'
 
@@ -157,7 +180,7 @@ table=t2 family=2 entries=135 op=nft_reset_rule'
 
 # resetting sets and elements
 
-elem=(22 ,80 ,443)
+elem=(22 ",80" ",443")
 relem=""
 for i in {1..3}; do
 	relem+="${elem[((i - 1))]}"
diff --git a/tools/testing/selftests/netfilter/nft_concat_range.sh b/tools/testing/selftests/net/netfilter/nft_concat_range.sh
index e908009576c7..6d66240e149c 100755
--- a/tools/testing/selftests/netfilter/nft_concat_range.sh
+++ b/tools/testing/selftests/net/netfilter/nft_concat_range.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 #
 # nft_concat_range.sh - Tests for sets with concatenation of ranged fields
@@ -7,10 +7,10 @@
 #
 # Author: Stefano Brivio <sbrivio@redhat.com>
 #
-# shellcheck disable=SC2154,SC2034,SC2016,SC2030,SC2031
+# shellcheck disable=SC2154,SC2034,SC2016,SC2030,SC2031,SC2317
 # ^ Configuration and templates sourced with eval, counters reused in subshells
 
-KSELFTEST_SKIP=4
+source lib.sh
 
 # Available test groups:
 # - reported_issues: check for issues that were reported in the past
@@ -19,7 +19,7 @@ KSELFTEST_SKIP=4
 # - timeout: check that packets match entries until they expire
 # - performance: estimate matching rate, compare with rbtree and hash baselines
 TESTS="reported_issues correctness concurrency timeout"
-[ "${quicktest}" != "1" ] && TESTS="${TESTS} performance"
+[ -n "$NFT_CONCAT_RANGE_TESTS" ] && TESTS="${NFT_CONCAT_RANGE_TESTS}"
 
 # Set types, defined by TYPE_ variables below
 TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto
@@ -31,7 +31,7 @@ BUGS="flush_remove_add reload"
 
 # List of possible paths to pktgen script from kernel tree for performance tests
 PKTGEN_SCRIPT_PATHS="
-	../../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+	../../../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
 	pktgen/pktgen_bench_xmit_mode_netif_receive.sh"
 
 # Definition of set types:
@@ -66,7 +66,7 @@ src
 start		1
 count		5
 src_delta	2000
-tools		sendip nc bash
+tools		sendip bash
 proto		udp
 
 race_repeat	3
@@ -91,7 +91,7 @@ src
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	3
@@ -116,7 +116,7 @@ src
 start		10
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp6
 
 race_repeat	3
@@ -141,7 +141,7 @@ src
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	0
@@ -163,7 +163,7 @@ src		mac
 start		10
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp6
 
 race_repeat	0
@@ -185,7 +185,7 @@ src		mac proto
 start		10
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp6
 
 race_repeat	0
@@ -207,7 +207,7 @@ src		addr4
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	3
@@ -227,7 +227,7 @@ src		addr6 port
 start		10
 count		5
 src_delta	2000
-tools		sendip socat nc
+tools		sendip socat
 proto		udp6
 
 race_repeat	3
@@ -247,7 +247,7 @@ src		mac proto addr4
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	0
@@ -264,7 +264,7 @@ src		mac
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	0
@@ -286,7 +286,7 @@ src		mac addr4
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	0
@@ -337,7 +337,7 @@ src		addr4
 start		1
 count		5
 src_delta	2000
-tools		sendip socat nc
+tools		sendip socat
 proto		udp
 
 race_repeat	3
@@ -363,7 +363,7 @@ src		mac
 start		1
 count		1
 src_delta	2000
-tools		sendip socat nc bash
+tools		sendip socat bash
 proto		udp
 
 race_repeat	0
@@ -473,8 +473,6 @@ setup_veth() {
 	B() {
 		ip netns exec B "$@" >/dev/null 2>&1
 	}
-
-	sleep 2
 }
 
 # Fill in set template and initialise set
@@ -488,12 +486,6 @@ check_tools() {
 
 	__tools=
 	for tool in ${tools}; do
-		if [ "${tool}" = "nc" ] && [ "${proto}" = "udp6" ] && \
-		   ! nc -u -w0 1.1.1.1 1 2>/dev/null; then
-			# Some GNU netcat builds might not support IPv6
-			__tools="${__tools} netcat-openbsd"
-			continue
-		fi
 		__tools="${__tools} ${tool}"
 
 		command -v "${tool}" >/dev/null && return 0
@@ -554,30 +546,7 @@ setup_send_udp() {
 			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
 			[ -z "${dst_port}" ] && dst_port=12345
 
-			echo "test4" | B socat -t 0.01 STDIN UDP4-DATAGRAM:${dst_addr4}:${dst_port}"${__socatbind}"
-
-			src_addr4=
-			src_port=
-		}
-	elif command -v nc >/dev/null; then
-		if nc -u -w0 1.1.1.1 1 2>/dev/null; then
-			# OpenBSD netcat
-			nc_opt="-w0"
-		else
-			# GNU netcat
-			nc_opt="-q0"
-		fi
-
-		send_udp() {
-			if [ -n "${src_addr4}" ]; then
-				B ip addr add "${src_addr4}" dev veth_b
-				__src_addr4="-s ${src_addr4}"
-			fi
-			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
-			[ -n "${src_port}" ] && src_port="-p ${src_port}"
-
-			echo "" | B nc -u "${nc_opt}" "${__src_addr4}" \
-				  "${src_port}" "${dst_addr4}" "${dst_port}"
+			echo "test4" | B socat -t 0.01 STDIN UDP4-DATAGRAM:"$dst_addr4":"$dst_port""${__socatbind}"
 
 			src_addr4=
 			src_port=
@@ -632,11 +601,7 @@ setup_send_udp6() {
 			__socatbind6=
 
 			if [ -n "${src_addr6}" ]; then
-				if [ -n "${src_addr6} != "${src_addr6_added} ]; then
-					B ip addr add "${src_addr6}" dev veth_b nodad
-
-					src_addr6_added=${src_addr6}
-				fi
+				B ip addr add "${src_addr6}" dev veth_b nodad
 
 				__socatbind6=",bind=[${src_addr6}]"
 
@@ -645,26 +610,7 @@ setup_send_udp6() {
 				fi
 			fi
 
-			echo "test6" | B socat -t 0.01 STDIN UDP6-DATAGRAM:[${dst_addr6}]:${dst_port}"${__socatbind6}"
-		}
-	elif command -v nc >/dev/null && nc -u -w0 1.1.1.1 1 2>/dev/null; then
-		# GNU netcat might not work with IPv6, try next tool
-		send_udp6() {
-			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
-				2>/dev/null
-			if [ -n "${src_addr6}" ]; then
-				B ip addr add "${src_addr6}" dev veth_b nodad
-			else
-				src_addr6="2001:db8::2"
-			fi
-			[ -n "${src_port}" ] && src_port="-p ${src_port}"
-
-			# shellcheck disable=SC2086 # this needs split options
-			echo "" | B nc -u w0 "-s${src_addr6}" ${src_port} \
-					       ${dst_addr6} ${dst_port}
-
-			src_addr6=
-			src_port=
+			echo "test6" | B socat -t 0.01 STDIN UDP6-DATAGRAM:["$dst_addr6"]:"$dst_port""${__socatbind6}"
 		}
 	elif [ -z "$(bash -c 'type -p')" ]; then
 		send_udp6() {
@@ -679,10 +625,17 @@ setup_send_udp6() {
 	fi
 }
 
+listener_ready()
+{
+	port="$1"
+	ss -lnt -o "sport = :$port" | grep -q "$port"
+}
+
 # Set up function to send TCP traffic on IPv4
 setup_flood_tcp() {
 	if command -v iperf3 >/dev/null; then
 		flood_tcp() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr4}" ]; then
 				B ip addr add "${src_addr4}/16" dev veth_b
@@ -699,7 +652,7 @@ setup_flood_tcp() {
 
 			# shellcheck disable=SC2086 # this needs split options
 			iperf3 -s -DB "${dst_addr4}" ${dst_port} >/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B iperf3 -c "${dst_addr4}" ${dst_port} ${src_port} \
@@ -711,6 +664,7 @@ setup_flood_tcp() {
 		}
 	elif command -v iperf >/dev/null; then
 		flood_tcp() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr4}" ]; then
 				B ip addr add "${src_addr4}/16" dev veth_b
@@ -727,7 +681,7 @@ setup_flood_tcp() {
 
 			# shellcheck disable=SC2086 # this needs split options
 			iperf -s -DB "${dst_addr4}" ${dst_port} >/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B iperf -c "${dst_addr4}" ${dst_port} ${src_addr4} \
@@ -739,6 +693,7 @@ setup_flood_tcp() {
 		}
 	elif command -v netperf >/dev/null; then
 		flood_tcp() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr4}" ]; then
 				B ip addr add "${src_addr4}/16" dev veth_b
@@ -755,7 +710,7 @@ setup_flood_tcp() {
 			# shellcheck disable=SC2086 # this needs split options
 			netserver -4 ${dst_port} -L "${dst_addr4}" \
 				>/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "${n_port}"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B netperf -4 -H "${dst_addr4}" ${dst_port} \
@@ -774,6 +729,7 @@ setup_flood_tcp() {
 setup_flood_tcp6() {
 	if command -v iperf3 >/dev/null; then
 		flood_tcp6() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr6}" ]; then
 				B ip addr add "${src_addr6}" dev veth_b nodad
@@ -790,7 +746,7 @@ setup_flood_tcp6() {
 
 			# shellcheck disable=SC2086 # this needs split options
 			iperf3 -s -DB "${dst_addr6}" ${dst_port} >/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "${n_port}"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B iperf3 -c "${dst_addr6}" ${dst_port} \
@@ -802,6 +758,7 @@ setup_flood_tcp6() {
 		}
 	elif command -v iperf >/dev/null; then
 		flood_tcp6() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr6}" ]; then
 				B ip addr add "${src_addr6}" dev veth_b nodad
@@ -818,7 +775,7 @@ setup_flood_tcp6() {
 
 			# shellcheck disable=SC2086 # this needs split options
 			iperf -s -VDB "${dst_addr6}" ${dst_port} >/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B iperf -c "${dst_addr6}" -V ${dst_port} \
@@ -830,6 +787,7 @@ setup_flood_tcp6() {
 		}
 	elif command -v netperf >/dev/null; then
 		flood_tcp6() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr6}" ]; then
 				B ip addr add "${src_addr6}" dev veth_b nodad
@@ -846,7 +804,7 @@ setup_flood_tcp6() {
 			# shellcheck disable=SC2086 # this needs split options
 			netserver -6 ${dst_port} -L "${dst_addr6}" \
 				>/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B netperf -6 -H "${dst_addr6}" ${dst_port} \
@@ -865,6 +823,7 @@ setup_flood_tcp6() {
 setup_flood_udp() {
 	if command -v iperf3 >/dev/null; then
 		flood_udp() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr4}" ]; then
 				B ip addr add "${src_addr4}/16" dev veth_b
@@ -881,7 +840,7 @@ setup_flood_udp() {
 
 			# shellcheck disable=SC2086 # this needs split options
 			iperf3 -s -DB "${dst_addr4}" ${dst_port}
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B iperf3 -u -c "${dst_addr4}" -Z -b 100M -l16 -t1000 \
@@ -893,6 +852,7 @@ setup_flood_udp() {
 		}
 	elif command -v iperf >/dev/null; then
 		flood_udp() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr4}" ]; then
 				B ip addr add "${src_addr4}/16" dev veth_b
@@ -909,7 +869,7 @@ setup_flood_udp() {
 
 			# shellcheck disable=SC2086 # this needs split options
 			iperf -u -sDB "${dst_addr4}" ${dst_port} >/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B iperf -u -c "${dst_addr4}" -b 100M -l1 -t1000 \
@@ -921,6 +881,7 @@ setup_flood_udp() {
 		}
 	elif command -v netperf >/dev/null; then
 		flood_udp() {
+			local n_port="${dst_port}"
 			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
 			if [ -n "${src_addr4}" ]; then
 				B ip addr add "${src_addr4}/16" dev veth_b
@@ -937,7 +898,7 @@ setup_flood_udp() {
 			# shellcheck disable=SC2086 # this needs split options
 			netserver -4 ${dst_port} -L "${dst_addr4}" \
 				>/dev/null 2>&1
-			sleep 2
+			busywait "$BUSYWAIT_TIMEOUT" listener_ready "$n_port"
 
 			# shellcheck disable=SC2086 # this needs split options
 			B netperf -4 -H "${dst_addr4}" ${dst_port} \
@@ -982,6 +943,7 @@ cleanup() {
 	ip link del dummy0			2>/dev/null
 	ip route del default			2>/dev/null
 	ip -6 route del default			2>/dev/null
+	ip netns pids B				2>/dev/null | xargs kill 2>/dev/null
 	ip netns del B				2>/dev/null
 	ip link del veth_a			2>/dev/null
 	timeout=
@@ -989,15 +951,18 @@ cleanup() {
 	killall iperf				2>/dev/null
 	killall netperf				2>/dev/null
 	killall netserver			2>/dev/null
-	rm -f ${tmp}
-	sleep 2
+}
+
+cleanup_exit() {
+	cleanup
+	rm -f "$tmp"
 }
 
 # Entry point for setup functions
 setup() {
 	if [ "$(id -u)" -ne 0 ]; then
 		echo "  need to run as root"
-		exit ${KSELFTEST_SKIP}
+		exit ${ksft_skip}
 	fi
 
 	cleanup
@@ -1258,7 +1223,7 @@ send_nomatch() {
 # - check that packets outside range don't match it
 # - remove some elements, check that packets don't match anymore
 test_correctness() {
-	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+	setup veth send_"${proto}" set || return ${ksft_skip}
 
 	range_size=1
 	for i in $(seq "${start}" $((start + count))); do
@@ -1273,7 +1238,7 @@ test_correctness() {
 		srcend=$((end + src_delta))
 
 		add "$(format)" || return 1
-		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
 			send_match "${j}" $((j + src_delta)) || return 1
 		done
 		send_nomatch $((end + 1)) $((end + 1 + src_delta)) || return 1
@@ -1281,7 +1246,7 @@ test_correctness() {
 		# Delete elements now and then
 		if [ $((i % 3)) -eq 0 ]; then
 			del "$(format)" || return 1
-			for j in $(seq ${start} \
+			for j in $(seq "$start" \
 				   $((range_size / 2 + 1)) ${end}); do
 				send_nomatch "${j}" $((j + src_delta)) \
 					|| return 1
@@ -1307,12 +1272,12 @@ test_concurrency() {
 	proto=${flood_proto}
 	tools=${flood_tools}
 	chain_spec=${flood_spec}
-	setup veth flood_"${proto}" set || return ${KSELFTEST_SKIP}
+	setup veth flood_"${proto}" set || return ${ksft_skip}
 
 	range_size=1
 	cstart=${start}
 	flood_pids=
-	for i in $(seq ${start} $((start + count))); do
+	for i in $(seq "$start" $((start + count))); do
 		end=$((start + range_size))
 		srcstart=$((start + src_delta))
 		srcend=$((end + src_delta))
@@ -1325,7 +1290,7 @@ test_concurrency() {
 		start=$((end + range_size))
 	done
 
-	sleep 10
+	sleep $((RANDOM%10))
 
 	pids=
 	for c in $(seq 1 "$(nproc)"); do (
@@ -1335,7 +1300,7 @@ test_concurrency() {
 			# $start needs to be local to this subshell
 			# shellcheck disable=SC2030
 			start=${cstart}
-			for i in $(seq ${start} $((start + count))); do
+			for i in $(seq "$start" $((start + count))); do
 				end=$((start + range_size))
 				srcstart=$((start + src_delta))
 				srcend=$((end + src_delta))
@@ -1350,7 +1315,7 @@ test_concurrency() {
 
 			range_size=1
 			start=${cstart}
-			for i in $(seq ${start} $((start + count))); do
+			for i in $(seq "$start" $((start + count))); do
 				end=$((start + range_size))
 				srcstart=$((start + src_delta))
 				srcend=$((end + src_delta))
@@ -1366,7 +1331,7 @@ test_concurrency() {
 
 			range_size=1
 			start=${cstart}
-			for i in $(seq ${start} $((start + count))); do
+			for i in $(seq "$start" $((start + count))); do
 				end=$((start + range_size))
 				srcstart=$((start + src_delta))
 				srcend=$((end + src_delta))
@@ -1379,7 +1344,7 @@ test_concurrency() {
 
 			range_size=1
 			start=${cstart}
-			for i in $(seq ${start} $((start + count))); do
+			for i in $(seq "$start" $((start + count))); do
 				end=$((start + range_size))
 				srcstart=$((start + src_delta))
 				srcend=$((end + src_delta))
@@ -1407,31 +1372,34 @@ test_concurrency() {
 # - add all the elements with 3s timeout while checking that packets match
 # - wait 3s after the last insertion, check that packets don't match any entry
 test_timeout() {
-	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+	setup veth send_"${proto}" set || return ${ksft_skip}
 
 	timeout=3
+
+	[ "$KSFT_MACHINE_SLOW" = "yes" ] && timeout=8
+
 	range_size=1
-	for i in $(seq "${start}" $((start + count))); do
+	for i in $(seq "$start" $((start + count))); do
 		end=$((start + range_size))
 		srcstart=$((start + src_delta))
 		srcend=$((end + src_delta))
 
 		add "$(format)" || return 1
 
-		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
 			send_match "${j}" $((j + src_delta)) || return 1
 		done
 
 		range_size=$((range_size + 1))
 		start=$((end + range_size))
 	done
-	sleep 3
-	for i in $(seq ${start} $((start + count))); do
+	sleep $timeout
+	for i in $(seq "$start" $((start + count))); do
 		end=$((start + range_size))
 		srcstart=$((start + src_delta))
 		srcend=$((end + src_delta))
 
-		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
 			send_nomatch "${j}" $((j + src_delta)) || return 1
 		done
 
@@ -1450,13 +1418,13 @@ test_performance() {
 	chain_spec=${perf_spec}
 	dst="${perf_dst}"
 	src="${perf_src}"
-	setup veth perf set || return ${KSELFTEST_SKIP}
+	setup veth perf set || return ${ksft_skip}
 
 	first=${start}
 	range_size=1
 	for set in test norange noconcat; do
 		start=${first}
-		for i in $(seq ${start} $((start + perf_entries))); do
+		for i in $(seq "$start" $((start + perf_entries))); do
 			end=$((start + range_size))
 			srcstart=$((start + src_delta))
 			srcend=$((end + src_delta))
@@ -1464,7 +1432,7 @@ test_performance() {
 			if [ $((end / 65534)) -gt $((start / 65534)) ]; then
 				start=${end}
 				end=$((end + 1))
-			elif [ ${start} -eq ${end} ]; then
+			elif [ "$start" -eq "$end" ]; then
 				end=$((start + 1))
 			fi
 
@@ -1475,7 +1443,7 @@ test_performance() {
 		nft -f "${tmp}"
 	done
 
-	perf $((end - 1)) ${srcstart}
+	perf $((end - 1)) "$srcstart"
 
 	sleep 2
 
@@ -1519,14 +1487,17 @@ test_performance() {
 }
 
 test_bug_flush_remove_add() {
+	rounds=100
+	[ "$KSFT_MACHINE_SLOW" = "yes" ] && rounds=10
+
 	set_cmd='{ set s { type ipv4_addr . inet_service; flags interval; }; }'
 	elem1='{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }'
 	elem2='{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }'
-	for i in `seq 1 100`; do
-		nft add table t ${set_cmd}	|| return ${KSELFTEST_SKIP}
-		nft add element t s ${elem1}	2>/dev/null || return 1
+	for i in $(seq 1 $rounds); do
+		nft add table t "$set_cmd"	|| return ${ksft_skip}
+		nft add element t s "$elem1"	2>/dev/null || return 1
 		nft flush set t s		2>/dev/null || return 1
-		nft add element t s ${elem2}	2>/dev/null || return 1
+		nft add element t s "$elem2"	2>/dev/null || return 1
 	done
 	nft flush ruleset
 }
@@ -1534,7 +1505,7 @@ test_bug_flush_remove_add() {
 # - add ranged element, check that packets match it
 # - reload the set, check packets still match
 test_bug_reload() {
-	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+	setup veth send_"${proto}" set || return ${ksft_skip}
 	rstart=${start}
 
 	range_size=1
@@ -1573,7 +1544,7 @@ test_bug_reload() {
 		srcstart=$((start + src_delta))
 		srcend=$((end + src_delta))
 
-		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
 			send_match "${j}" $((j + src_delta)) || return 1
 		done
 
@@ -1591,12 +1562,12 @@ test_reported_issues() {
 # Run everything in a separate network namespace
 [ "${1}" != "run" ] && { unshare -n "${0}" run; exit $?; }
 tmp="$(mktemp)"
-trap cleanup EXIT
+trap cleanup_exit EXIT
 
 # Entry point for test runs
 passed=0
 for name in ${TESTS}; do
-	printf "TEST: %s\n" "$(echo ${name} | tr '_' ' ')"
+	printf "TEST: %s\n" "$(echo "$name" | tr '_' ' ')"
 	if [ "${name}" = "reported_issues" ]; then
 		SUBTESTS="${BUGS}"
 	else
@@ -1623,10 +1594,16 @@ for name in ${TESTS}; do
 			continue
 		fi
 
-		printf "  %-60s  " "${display}"
+		[ "$KSFT_MACHINE_SLOW" = "yes" ] && count=1
+
+		printf "  %-32s  " "${display}"
+		tthen=$(date +%s)
 		eval test_"${name}"
 		ret=$?
 
+		tnow=$(date +%s)
+		printf "%5ds%-30s" $((tnow-tthen))
+
 		if [ $ret -eq 0 ]; then
 			printf "[ OK ]\n"
 			info_flush
@@ -1635,11 +1612,11 @@ for name in ${TESTS}; do
 			printf "[FAIL]\n"
 			err_flush
 			exit 1
-		elif [ $ret -eq ${KSELFTEST_SKIP} ]; then
+		elif [ $ret -eq ${ksft_skip} ]; then
 			printf "[SKIP]\n"
 			err_flush
 		fi
 	done
 done
 
-[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP} || exit 0
+[ ${passed} -eq 0 ] && exit ${ksft_skip} || exit 0
diff --git a/tools/testing/selftests/net/netfilter/nft_concat_range_perf.sh b/tools/testing/selftests/net/netfilter/nft_concat_range_perf.sh
new file mode 100755
index 000000000000..5d276995a5c5
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nft_concat_range_perf.sh
@@ -0,0 +1,9 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+
+source lib.sh
+
+[ "$KSFT_MACHINE_SLOW" = yes ] && exit ${ksft_skip}
+
+NFT_CONCAT_RANGE_TESTS="performance" exec ./nft_concat_range.sh
diff --git a/tools/testing/selftests/net/netfilter/nft_conntrack_helper.sh b/tools/testing/selftests/net/netfilter/nft_conntrack_helper.sh
new file mode 100755
index 000000000000..abcaa7337197
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nft_conntrack_helper.sh
@@ -0,0 +1,171 @@
+#!/bin/bash
+#
+# This tests connection tracking helper assignment:
+# 1. can attach ftp helper to a connection from nft ruleset.
+# 2. auto-assign still works.
+#
+# Kselftest framework requirement - SKIP code is 4.
+
+source lib.sh
+
+ret=0
+
+testipv6=1
+
+checktool "socat -h" "run test without socat"
+checktool "conntrack --version" "run test without conntrack"
+checktool "nft --version" "run test without nft"
+
+cleanup()
+{
+	ip netns pids "$ns1" | xargs kill 2>/dev/null
+
+	ip netns del "$ns1"
+	ip netns del "$ns2"
+}
+
+trap cleanup EXIT
+
+setup_ns ns1 ns2
+
+if ! ip link add veth0 netns "$ns1" type veth peer name veth0 netns "$ns2" > /dev/null 2>&1;then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
+
+ip -net "$ns1" link set veth0 up
+ip -net "$ns2" link set veth0 up
+
+ip -net "$ns1" addr add 10.0.1.1/24 dev veth0
+ip -net "$ns1" addr add dead:1::1/64 dev veth0 nodad
+
+ip -net "$ns2" addr add 10.0.1.2/24 dev veth0
+ip -net "$ns2" addr add dead:1::2/64 dev veth0 nodad
+
+load_ruleset_family() {
+	local family=$1
+	local ns=$2
+
+ip netns exec "$ns" nft -f - <<EOF
+table $family raw {
+	ct helper ftp {
+             type "ftp" protocol tcp
+        }
+	chain pre {
+		type filter hook prerouting priority 0; policy accept;
+		tcp dport 2121 ct helper set "ftp"
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		tcp dport 2121 ct helper set "ftp"
+	}
+}
+EOF
+	return $?
+}
+
+check_for_helper()
+{
+	local netns=$1
+	local message=$2
+	local port=$3
+
+	if echo "$message" |grep -q 'ipv6';then
+		local family="ipv6"
+	else
+		local family="ipv4"
+	fi
+
+	if ! ip netns exec "$netns" conntrack -L -f $family -p tcp --dport "$port" 2> /dev/null |grep -q 'helper=ftp';then
+		if [ "$autoassign" -eq 0 ] ;then
+			echo "FAIL: ${netns} did not show attached helper $message" 1>&2
+			ret=1
+		else
+			echo "PASS: ${netns} did not show attached helper $message" 1>&2
+		fi
+	else
+		if [ "$autoassign" -eq 0 ] ;then
+			echo "PASS: ${netns} connection on port $port has ftp helper attached" 1>&2
+		else
+			echo "FAIL: ${netns} connection on port $port has ftp helper attached" 1>&2
+			ret=1
+		fi
+	fi
+
+	return 0
+}
+
+listener_ready()
+{
+	ns="$1"
+	port="$2"
+	proto="$3"
+	ss -N "$ns" -lnt -o "sport = :$port" | grep -q "$port"
+}
+
+test_helper()
+{
+	local port=$1
+	local autoassign=$2
+
+	if [ "$autoassign" -eq 0 ] ;then
+		msg="set via ruleset"
+	else
+		msg="auto-assign"
+	fi
+
+	ip netns exec "$ns2" socat -t 3 -u -4 TCP-LISTEN:"$port",reuseaddr STDOUT > /dev/null &
+	busywait "$BUSYWAIT_TIMEOUT" listener_ready "$ns2" "$port" "-4"
+
+	ip netns exec "$ns1" socat -u -4 STDIN TCP:10.0.1.2:"$port" < /dev/null > /dev/null
+
+	check_for_helper "$ns1" "ip $msg" "$port" "$autoassign"
+	check_for_helper "$ns2" "ip $msg" "$port" "$autoassign"
+
+	if [ $testipv6 -eq 0 ] ;then
+		return 0
+	fi
+
+	ip netns exec "$ns1" conntrack -F 2> /dev/null
+	ip netns exec "$ns2" conntrack -F 2> /dev/null
+
+	ip netns exec "$ns2" socat -t 3 -u -6 TCP-LISTEN:"$port",reuseaddr STDOUT > /dev/null &
+	busywait $BUSYWAIT_TIMEOUT listener_ready "$ns2" "$port" "-6"
+
+	ip netns exec "$ns1" socat -t 3 -u -6 STDIN TCP:"[dead:1::2]":"$port" < /dev/null > /dev/null
+
+	check_for_helper "$ns1" "ipv6 $msg" "$port"
+	check_for_helper "$ns2" "ipv6 $msg" "$port"
+}
+
+if ! load_ruleset_family ip "$ns1"; then
+	echo "FAIL: ${ns1} cannot load ip ruleset" 1>&2
+	exit 1
+fi
+
+if ! load_ruleset_family ip6 "$ns1"; then
+	echo "SKIP: ${ns1} cannot load ip6 ruleset" 1>&2
+	testipv6=0
+fi
+
+if ! load_ruleset_family inet "${ns2}"; then
+	echo "SKIP: ${ns1} cannot load inet ruleset" 1>&2
+	if ! load_ruleset_family ip "${ns2}"; then
+		echo "FAIL: ${ns2} cannot load ip ruleset" 1>&2
+		exit 1
+	fi
+
+	if [ "$testipv6" -eq 1 ] ;then
+		if ! load_ruleset_family ip6 "$ns2"; then
+			echo "FAIL: ${ns2} cannot load ip6 ruleset" 1>&2
+			exit 1
+		fi
+	fi
+fi
+
+test_helper 2121 0
+ip netns exec "$ns1" sysctl -qe 'net.netfilter.nf_conntrack_helper=1'
+ip netns exec "$ns2" sysctl -qe 'net.netfilter.nf_conntrack_helper=1'
+test_helper 21 1
+
+exit $ret
diff --git a/tools/testing/selftests/net/netfilter/nft_fib.sh b/tools/testing/selftests/net/netfilter/nft_fib.sh
new file mode 100755
index 000000000000..ce1451c275fd
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nft_fib.sh
@@ -0,0 +1,234 @@
+#!/bin/bash
+#
+# This tests the fib expression.
+#
+# Kselftest framework requirement - SKIP code is 4.
+
+source lib.sh
+
+ret=0
+
+timeout=4
+
+log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
+
+cleanup()
+{
+	cleanup_all_ns
+
+	[ "$log_netns" -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns
+}
+
+checktool "nft --version" "run test without nft"
+
+setup_ns nsrouter ns1 ns2
+
+trap cleanup EXIT
+
+if dmesg | grep -q ' nft_rpfilter: ';then
+	dmesg -c | grep ' nft_rpfilter: '
+	echo "WARN: a previous test run has failed" 1>&2
+fi
+
+sysctl -q net.netfilter.nf_log_all_netns=1
+
+load_ruleset() {
+	local netns=$1
+
+ip netns exec "$netns" nft -f /dev/stdin <<EOF
+table inet filter {
+	chain prerouting {
+		type filter hook prerouting priority 0; policy accept;
+	        fib saddr . iif oif missing counter log prefix "$netns nft_rpfilter: " drop
+	}
+}
+EOF
+}
+
+load_pbr_ruleset() {
+	local netns=$1
+
+ip netns exec "$netns" nft -f /dev/stdin <<EOF
+table inet filter {
+	chain forward {
+		type filter hook forward priority raw;
+		fib saddr . iif oif gt 0 accept
+		log drop
+	}
+}
+EOF
+}
+
+load_ruleset_count() {
+	local netns=$1
+
+ip netns exec "$netns" nft -f /dev/stdin <<EOF
+table inet filter {
+	chain prerouting {
+		type filter hook prerouting priority 0; policy accept;
+		ip daddr 1.1.1.1 fib saddr . iif oif missing counter drop
+		ip6 daddr 1c3::c01d fib saddr . iif oif missing counter drop
+	}
+}
+EOF
+}
+
+check_drops() {
+	if dmesg | grep -q ' nft_rpfilter: ';then
+		dmesg | grep ' nft_rpfilter: '
+		echo "FAIL: rpfilter did drop packets"
+		return 1
+	fi
+
+	return 0
+}
+
+check_fib_counter() {
+	local want=$1
+	local ns=$2
+	local address=$3
+
+	if ! ip netns exec "$ns" nft list table inet filter | grep 'fib saddr . iif' | grep "$address" | grep -q "packets $want";then
+		echo "Netns $ns fib counter doesn't match expected packet count of $want for $address" 1>&2
+		ip netns exec "$ns" nft list table inet filter
+		return 1
+	fi
+
+	if [ "$want" -gt 0 ]; then
+		echo "PASS: fib expression did drop packets for $address"
+	fi
+
+	return 0
+}
+
+load_ruleset "$nsrouter"
+load_ruleset "$ns1"
+load_ruleset "$ns2"
+
+if ! ip link add veth0 netns "$nsrouter" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1; then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
+ip link add veth1 netns "$nsrouter" type veth peer name eth0 netns "$ns2"
+
+ip -net "$nsrouter" link set veth0 up
+ip -net "$nsrouter" addr add 10.0.1.1/24 dev veth0
+ip -net "$nsrouter" addr add dead:1::1/64 dev veth0 nodad
+
+ip -net "$nsrouter" link set veth1 up
+ip -net "$nsrouter" addr add 10.0.2.1/24 dev veth1
+ip -net "$nsrouter" addr add dead:2::1/64 dev veth1 nodad
+
+ip -net "$ns1" link set eth0 up
+ip -net "$ns2" link set eth0 up
+
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns1" route add default via dead:1::1
+
+ip -net "$ns2" addr add 10.0.2.99/24 dev eth0
+ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad
+ip -net "$ns2" route add default via 10.0.2.1
+ip -net "$ns2" route add default via dead:2::1
+
+test_ping() {
+  local daddr4=$1
+  local daddr6=$2
+
+  if ! ip netns exec "$ns1" ping -c 1 -q "$daddr4" > /dev/null; then
+	check_drops
+	echo "FAIL: ${ns1} cannot reach $daddr4, ret $ret" 1>&2
+	return 1
+  fi
+
+  if ! ip netns exec "$ns1" ping -c 1 -q "$daddr6" > /dev/null; then
+	check_drops
+	echo "FAIL: ${ns1} cannot reach $daddr6, ret $ret" 1>&2
+	return 1
+  fi
+
+  return 0
+}
+
+ip netns exec "$nsrouter" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.all.rp_filter=0 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.rp_filter=0 > /dev/null
+
+test_ping 10.0.2.1 dead:2::1 || exit 1
+check_drops || exit 1
+
+test_ping 10.0.2.99 dead:2::99 || exit 1
+check_drops || exit 1
+
+echo "PASS: fib expression did not cause unwanted packet drops"
+
+ip netns exec "$nsrouter" nft flush table inet filter
+
+ip -net "$ns1" route del default
+ip -net "$ns1" -6 route del default
+
+ip -net "$ns1" addr del 10.0.1.99/24 dev eth0
+ip -net "$ns1" addr del dead:1::99/64 dev eth0
+
+ip -net "$ns1" addr add 10.0.2.99/24 dev eth0
+ip -net "$ns1" addr add dead:2::99/64 dev eth0 nodad
+
+ip -net "$ns1" route add default via 10.0.2.1
+ip -net "$ns1" -6 route add default via dead:2::1
+
+ip -net "$nsrouter" addr add dead:2::1/64 dev veth0 nodad
+
+# switch to ruleset that doesn't log, this time
+# its expected that this does drop the packets.
+load_ruleset_count "$nsrouter"
+
+# ns1 has a default route, but nsrouter does not.
+# must not check return value, ping to 1.1.1.1 will
+# fail.
+check_fib_counter 0 "$nsrouter" 1.1.1.1 || exit 1
+check_fib_counter 0 "$nsrouter" 1c3::c01d || exit 1
+
+ip netns exec "$ns1" ping -W 0.5 -c 1 -q 1.1.1.1 > /dev/null
+check_fib_counter 1 "$nsrouter" 1.1.1.1 || exit 1
+
+ip netns exec "$ns1" ping -W 0.5 -i 0.1 -c 3 -q 1c3::c01d > /dev/null
+check_fib_counter 3 "$nsrouter" 1c3::c01d || exit 1
+
+# delete all rules
+ip netns exec "$ns1" nft flush ruleset
+ip netns exec "$ns2" nft flush ruleset
+ip netns exec "$nsrouter" nft flush ruleset
+
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad
+
+ip -net "$ns1" addr del 10.0.2.99/24 dev eth0
+ip -net "$ns1" addr del dead:2::99/64 dev eth0
+
+ip -net "$nsrouter" addr del dead:2::1/64 dev veth0
+
+# ... pbr ruleset for the router, check iif+oif.
+if ! load_pbr_ruleset "$nsrouter";then
+	echo "SKIP: Could not load fib forward ruleset"
+	exit $ksft_skip
+fi
+
+ip -net "$nsrouter" rule add from all table 128
+ip -net "$nsrouter" rule add from all iif veth0 table 129
+ip -net "$nsrouter" route add table 128 to 10.0.1.0/24 dev veth0
+ip -net "$nsrouter" route add table 129 to 10.0.2.0/24 dev veth1
+
+# drop main ipv4 table
+ip -net "$nsrouter" -4 rule delete table main
+
+if ! test_ping 10.0.2.99 dead:2::99;then
+	ip -net "$nsrouter" nft list ruleset
+	echo "FAIL: fib mismatch in pbr setup"
+	exit 1
+fi
+
+echo "PASS: fib expression forward check with policy based routing"
+exit 0
diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/net/netfilter/nft_flowtable.sh
index a32f490f7539..b3995550856a 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/net/netfilter/nft_flowtable.sh
@@ -14,15 +14,10 @@
 # nft_flowtable.sh -o8000 -l1500 -r2000
 #
 
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-nsr1="nsr1-$sfx"
-nsr2="nsr2-$sfx"
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
+
 ret=0
+SOCAT_TIMEOUT=60
 
 nsin=""
 ns1out=""
@@ -30,52 +25,41 @@ ns2out=""
 
 log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
 
-checktool (){
-	if ! $1 > /dev/null 2>&1; then
-		echo "SKIP: Could not $2"
-		exit $ksft_skip
-	fi
-}
-
 checktool "nft --version" "run test without nft tool"
-checktool "ip -Version" "run test without ip tool"
-checktool "which nc" "run test without nc (netcat)"
-checktool "ip netns add $nsr1" "create net namespace $nsr1"
+checktool "socat -h" "run test without socat"
 
-ip netns add $ns1
-ip netns add $ns2
-ip netns add $nsr2
+setup_ns ns1 ns2 nsr1 nsr2
 
 cleanup() {
-	ip netns del $ns1
-	ip netns del $ns2
-	ip netns del $nsr1
-	ip netns del $nsr2
+	ip netns pids "$ns1" | xargs kill 2>/dev/null
+	ip netns pids "$ns2" | xargs kill 2>/dev/null
+
+	cleanup_all_ns
 
 	rm -f "$nsin" "$ns1out" "$ns2out"
 
-	[ $log_netns -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns
+	[ "$log_netns" -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns="$log_netns"
 }
 
 trap cleanup EXIT
 
 sysctl -q net.netfilter.nf_log_all_netns=1
 
-ip link add veth0 netns $nsr1 type veth peer name eth0 netns $ns1
-ip link add veth1 netns $nsr1 type veth peer name veth0 netns $nsr2
+ip link add veth0 netns "$nsr1" type veth peer name eth0 netns "$ns1"
+ip link add veth1 netns "$nsr1" type veth peer name veth0 netns "$nsr2"
 
-ip link add veth1 netns $nsr2 type veth peer name eth0 netns $ns2
+ip link add veth1 netns "$nsr2" type veth peer name eth0 netns "$ns2"
 
-for dev in lo veth0 veth1; do
-    ip -net $nsr1 link set $dev up
-    ip -net $nsr2 link set $dev up
+for dev in veth0 veth1; do
+    ip -net "$nsr1" link set "$dev" up
+    ip -net "$nsr2" link set "$dev" up
 done
 
-ip -net $nsr1 addr add 10.0.1.1/24 dev veth0
-ip -net $nsr1 addr add dead:1::1/64 dev veth0
+ip -net "$nsr1" addr add 10.0.1.1/24 dev veth0
+ip -net "$nsr1" addr add dead:1::1/64 dev veth0 nodad
 
-ip -net $nsr2 addr add 10.0.2.1/24 dev veth1
-ip -net $nsr2 addr add dead:2::1/64 dev veth1
+ip -net "$nsr2" addr add 10.0.2.1/24 dev veth1
+ip -net "$nsr2" addr add dead:2::1/64 dev veth1 nodad
 
 # set different MTUs so we need to push packets coming from ns1 (large MTU)
 # to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1),
@@ -107,56 +91,63 @@ do
 	esac
 done
 
-if ! ip -net $nsr1 link set veth0 mtu $omtu; then
+if ! ip -net "$nsr1" link set veth0 mtu "$omtu"; then
+	exit 1
+fi
+
+ip -net "$ns1" link set eth0 mtu "$omtu"
+
+if ! ip -net "$nsr2" link set veth1 mtu "$rmtu"; then
 	exit 1
 fi
 
-ip -net $ns1 link set eth0 mtu $omtu
+if ! ip -net "$nsr1" link set veth1 mtu "$lmtu"; then
+	exit 1
+fi
 
-if ! ip -net $nsr2 link set veth1 mtu $rmtu; then
+if ! ip -net "$nsr2" link set veth0 mtu "$lmtu"; then
 	exit 1
 fi
 
-ip -net $ns2 link set eth0 mtu $rmtu
+ip -net "$ns2" link set eth0 mtu "$rmtu"
 
 # transfer-net between nsr1 and nsr2.
 # these addresses are not used for connections.
-ip -net $nsr1 addr add 192.168.10.1/24 dev veth1
-ip -net $nsr1 addr add fee1:2::1/64 dev veth1
+ip -net "$nsr1" addr add 192.168.10.1/24 dev veth1
+ip -net "$nsr1" addr add fee1:2::1/64 dev veth1 nodad
 
-ip -net $nsr2 addr add 192.168.10.2/24 dev veth0
-ip -net $nsr2 addr add fee1:2::2/64 dev veth0
+ip -net "$nsr2" addr add 192.168.10.2/24 dev veth0
+ip -net "$nsr2" addr add fee1:2::2/64 dev veth0 nodad
 
 for i in 0 1; do
-  ip netns exec $nsr1 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null
-  ip netns exec $nsr2 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null
+  ip netns exec "$nsr1" sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null
+  ip netns exec "$nsr2" sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null
 done
 
-for ns in $ns1 $ns2;do
-  ip -net $ns link set lo up
-  ip -net $ns link set eth0 up
+for ns in "$ns1" "$ns2";do
+  ip -net "$ns" link set eth0 up
 
-  if ! ip netns exec $ns sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then
+  if ! ip netns exec "$ns" sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then
 	echo "ERROR: Check Originator/Responder values (problem during address addition)"
 	exit 1
   fi
   # don't set ip DF bit for first two tests
-  ip netns exec $ns sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null
+  ip netns exec "$ns" sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null
 done
 
-ip -net $ns1 addr add 10.0.1.99/24 dev eth0
-ip -net $ns2 addr add 10.0.2.99/24 dev eth0
-ip -net $ns1 route add default via 10.0.1.1
-ip -net $ns2 route add default via 10.0.2.1
-ip -net $ns1 addr add dead:1::99/64 dev eth0
-ip -net $ns2 addr add dead:2::99/64 dev eth0
-ip -net $ns1 route add default via dead:1::1
-ip -net $ns2 route add default via dead:2::1
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns2" addr add 10.0.2.99/24 dev eth0
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns2" route add default via 10.0.2.1
+ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad
+ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad
+ip -net "$ns1" route add default via dead:1::1
+ip -net "$ns2" route add default via dead:2::1
 
-ip -net $nsr1 route add default via 192.168.10.2
-ip -net $nsr2 route add default via 192.168.10.1
+ip -net "$nsr1" route add default via 192.168.10.2
+ip -net "$nsr2" route add default via 192.168.10.1
 
-ip netns exec $nsr1 nft -f - <<EOF
+ip netns exec "$nsr1" nft -f - <<EOF
 table inet filter {
   flowtable f1 {
      hook ingress priority 0
@@ -188,7 +179,7 @@ if [ $? -ne 0 ]; then
 	exit $ksft_skip
 fi
 
-ip netns exec $ns2 nft -f - <<EOF
+ip netns exec "$ns2" nft -f - <<EOF
 table inet filter {
    counter ip4dscp0 { }
    counter ip4dscp3 { }
@@ -204,25 +195,22 @@ table inet filter {
 EOF
 
 if [ $? -ne 0 ]; then
-	echo "SKIP: Could not load nft ruleset"
+	echo -n "SKIP: Could not load ruleset: "
+	nft --version
 	exit $ksft_skip
 fi
 
 # test basic connectivity
-if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
+if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then
   echo "ERROR: $ns1 cannot reach ns2" 1>&2
   exit 1
 fi
 
-if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then
+if ! ip netns exec "$ns2" ping -c 1 -q 10.0.1.99 > /dev/null; then
   echo "ERROR: $ns2 cannot reach $ns1" 1>&2
   exit 1
 fi
 
-if [ $ret -eq 0 ];then
-	echo "PASS: netns routing/connectivity: $ns1 can reach $ns2"
-fi
-
 nsin=$(mktemp)
 ns1out=$(mktemp)
 ns2out=$(mktemp)
@@ -248,23 +236,27 @@ check_counters()
 	local what=$1
 	local ok=1
 
-	local orig=$(ip netns exec $nsr1 nft reset counter inet filter routed_orig | grep packets)
-	local repl=$(ip netns exec $nsr1 nft reset counter inet filter routed_repl | grep packets)
+	local orig repl
+	orig=$(ip netns exec "$nsr1" nft reset counter inet filter routed_orig | grep packets)
+	repl=$(ip netns exec "$nsr1" nft reset counter inet filter routed_repl | grep packets)
 
 	local orig_cnt=${orig#*bytes}
 	local repl_cnt=${repl#*bytes}
 
-	local fs=$(du -sb $nsin)
+	local fs
+	fs=$(du -sb "$nsin")
 	local max_orig=${fs%%/*}
 	local max_repl=$((max_orig/4))
 
-	if [ $orig_cnt -gt $max_orig ];then
+	# flowtable fastpath should bypass normal routing one, i.e. the counters in forward hook
+	# should always be lower than the size of the transmitted file (max_orig).
+	if [ "$orig_cnt" -gt "$max_orig" ];then
 		echo "FAIL: $what: original counter $orig_cnt exceeds expected value $max_orig" 1>&2
 		ret=1
 		ok=0
 	fi
 
-	if [ $repl_cnt -gt $max_repl ];then
+	if [ "$repl_cnt" -gt $max_repl ];then
 		echo "FAIL: $what: reply counter $repl_cnt exceeds expected value $max_repl" 1>&2
 		ret=1
 		ok=0
@@ -280,39 +272,40 @@ check_dscp()
 	local what=$1
 	local ok=1
 
-	local counter=$(ip netns exec $ns2 nft reset counter inet filter ip4dscp3 | grep packets)
+	local counter
+	counter=$(ip netns exec "$ns2" nft reset counter inet filter ip4dscp3 | grep packets)
 
 	local pc4=${counter%*bytes*}
 	local pc4=${pc4#*packets}
 
-	local counter=$(ip netns exec $ns2 nft reset counter inet filter ip4dscp0 | grep packets)
+	counter=$(ip netns exec "$ns2" nft reset counter inet filter ip4dscp0 | grep packets)
 	local pc4z=${counter%*bytes*}
 	local pc4z=${pc4z#*packets}
 
 	case "$what" in
 	"dscp_none")
-		if [ $pc4 -gt 0 ] || [ $pc4z -eq 0 ]; then
+		if [ "$pc4" -gt 0 ] || [ "$pc4z" -eq 0 ]; then
 			echo "FAIL: dscp counters do not match, expected dscp3 == 0, dscp0 > 0, but got $pc4,$pc4z" 1>&2
 			ret=1
 			ok=0
 		fi
 		;;
 	"dscp_fwd")
-		if [ $pc4 -eq 0 ] || [ $pc4z -eq 0 ]; then
+		if [ "$pc4" -eq 0 ] || [ "$pc4z" -eq 0 ]; then
 			echo "FAIL: dscp counters do not match, expected dscp3 and dscp0 > 0 but got $pc4,$pc4z" 1>&2
 			ret=1
 			ok=0
 		fi
 		;;
 	"dscp_ingress")
-		if [ $pc4 -eq 0 ] || [ $pc4z -gt 0 ]; then
+		if [ "$pc4" -eq 0 ] || [ "$pc4z" -gt 0 ]; then
 			echo "FAIL: dscp counters do not match, expected dscp3 > 0, dscp0 == 0 but got $pc4,$pc4z" 1>&2
 			ret=1
 			ok=0
 		fi
 		;;
 	"dscp_egress")
-		if [ $pc4 -eq 0 ] || [ $pc4z -gt 0 ]; then
+		if [ "$pc4" -eq 0 ] || [ "$pc4z" -gt 0 ]; then
 			echo "FAIL: dscp counters do not match, expected dscp3 > 0, dscp0 == 0 but got $pc4,$pc4z" 1>&2
 			ret=1
 			ok=0
@@ -324,7 +317,7 @@ check_dscp()
 		ok=0
 	esac
 
-	if [ $ok -eq 1 ] ;then
+	if [ "$ok" -eq 1 ] ;then
 		echo "PASS: $what: dscp packet counters match"
 	fi
 }
@@ -345,6 +338,11 @@ check_transfer()
 	return 0
 }
 
+listener_ready()
+{
+	ss -N "$nsb" -lnt -o "sport = :12345" | grep -q 12345
+}
+
 test_tcp_forwarding_ip()
 {
 	local nsa=$1
@@ -353,40 +351,23 @@ test_tcp_forwarding_ip()
 	local dstport=$4
 	local lret=0
 
-	ip netns exec $nsb nc -w 5 -l -p 12345 < "$nsin" > "$ns2out" &
+	timeout "$SOCAT_TIMEOUT" ip netns exec "$nsb" socat -4 TCP-LISTEN:12345,reuseaddr STDIO < "$nsin" > "$ns2out" &
 	lpid=$!
 
-	sleep 1
-	ip netns exec $nsa nc -w 4 "$dstip" "$dstport" < "$nsin" > "$ns1out" &
-	cpid=$!
-
-	sleep 1
-
-	prev="$(ls -l $ns1out $ns2out)"
-	sleep 1
-
-	while [[ "$prev" != "$(ls -l $ns1out $ns2out)" ]]; do
-		sleep 1;
-		prev="$(ls -l $ns1out $ns2out)"
-	done
+	busywait 1000 listener_ready
 
-	if test -d /proc/"$lpid"/; then
-		kill $lpid
-	fi
-
-	if test -d /proc/"$cpid"/; then
-		kill $cpid
-	fi
+	timeout "$SOCAT_TIMEOUT" ip netns exec "$nsa" socat -4 TCP:"$dstip":"$dstport" STDIO < "$nsin" > "$ns1out"
 
 	wait $lpid
-	wait $cpid
 
 	if ! check_transfer "$nsin" "$ns2out" "ns1 -> ns2"; then
 		lret=1
+		ret=1
 	fi
 
 	if ! check_transfer "$nsin" "$ns1out" "ns1 <- ns2"; then
 		lret=1
+		ret=1
 	fi
 
 	return $lret
@@ -403,7 +384,7 @@ test_tcp_forwarding_set_dscp()
 {
 	check_dscp "dscp_none"
 
-ip netns exec $nsr1 nft -f - <<EOF
+ip netns exec "$nsr1" nft -f - <<EOF
 table netdev dscpmangle {
    chain setdscp0 {
       type filter hook ingress device "veth0" priority 0; policy accept
@@ -415,12 +396,12 @@ if [ $? -eq 0 ]; then
 	test_tcp_forwarding_ip "$1" "$2"  10.0.2.99 12345
 	check_dscp "dscp_ingress"
 
-	ip netns exec $nsr1 nft delete table netdev dscpmangle
+	ip netns exec "$nsr1" nft delete table netdev dscpmangle
 else
 	echo "SKIP: Could not load netdev:ingress for veth0"
 fi
 
-ip netns exec $nsr1 nft -f - <<EOF
+ip netns exec "$nsr1" nft -f - <<EOF
 table netdev dscpmangle {
    chain setdscp0 {
       type filter hook egress device "veth1" priority 0; policy accept
@@ -432,14 +413,14 @@ if [ $? -eq 0 ]; then
 	test_tcp_forwarding_ip "$1" "$2"  10.0.2.99 12345
 	check_dscp "dscp_egress"
 
-	ip netns exec $nsr1 nft flush table netdev dscpmangle
+	ip netns exec "$nsr1" nft flush table netdev dscpmangle
 else
 	echo "SKIP: Could not load netdev:egress for veth1"
 fi
 
 	# partial.  If flowtable really works, then both dscp-is-0 and dscp-is-cs3
 	# counters should have seen packets (before and after ft offload kicks in).
-	ip netns exec $nsr1 nft -a insert rule inet filter forward ip dscp set cs3
+	ip netns exec "$nsr1" nft -a insert rule inet filter forward ip dscp set cs3
 	test_tcp_forwarding_ip "$1" "$2"  10.0.2.99 12345
 	check_dscp "dscp_fwd"
 }
@@ -455,8 +436,8 @@ test_tcp_forwarding_nat()
 	pmtu=$3
 	what=$4
 
-	if [ $lret -eq 0 ] ; then
-		if [ $pmtu -eq 1 ] ;then
+	if [ "$lret" -eq 0 ] ; then
+		if [ "$pmtu" -eq 1 ] ;then
 			check_counters "flow offload for ns1/ns2 with masquerade and pmtu discovery $what"
 		else
 			echo "PASS: flow offload for ns1/ns2 with masquerade $what"
@@ -464,9 +445,9 @@ test_tcp_forwarding_nat()
 
 		test_tcp_forwarding_ip "$1" "$2" 10.6.6.6 1666
 		lret=$?
-		if [ $pmtu -eq 1 ] ;then
+		if [ "$pmtu" -eq 1 ] ;then
 			check_counters "flow offload for ns1/ns2 with dnat and pmtu discovery $what"
-		elif [ $lret -eq 0 ] ; then
+		elif [ "$lret" -eq 0 ] ; then
 			echo "PASS: flow offload for ns1/ns2 with dnat $what"
 		fi
 	fi
@@ -481,25 +462,25 @@ make_file "$nsin"
 # Due to MTU mismatch in both directions, all packets (except small packets like pure
 # acks) have to be handled by normal forwarding path.  Therefore, packet counters
 # are not checked.
-if test_tcp_forwarding $ns1 $ns2; then
+if test_tcp_forwarding "$ns1" "$ns2"; then
 	echo "PASS: flow offloaded for ns1/ns2"
 else
 	echo "FAIL: flow offload for ns1/ns2:" 1>&2
-	ip netns exec $nsr1 nft list ruleset
+	ip netns exec "$nsr1" nft list ruleset
 	ret=1
 fi
 
 # delete default route, i.e. ns2 won't be able to reach ns1 and
 # will depend on ns1 being masqueraded in nsr1.
 # expect ns1 has nsr1 address.
-ip -net $ns2 route del default via 10.0.2.1
-ip -net $ns2 route del default via dead:2::1
-ip -net $ns2 route add 192.168.10.1 via 10.0.2.1
+ip -net "$ns2" route del default via 10.0.2.1
+ip -net "$ns2" route del default via dead:2::1
+ip -net "$ns2" route add 192.168.10.1 via 10.0.2.1
 
 # Second test:
 # Same, but with NAT enabled.  Same as in first test: we expect normal forward path
 # to handle most packets.
-ip netns exec $nsr1 nft -f - <<EOF
+ip netns exec "$nsr1" nft -f - <<EOF
 table ip nat {
    chain prerouting {
       type nat hook prerouting priority 0; policy accept;
@@ -513,14 +494,14 @@ table ip nat {
 }
 EOF
 
-if ! test_tcp_forwarding_set_dscp $ns1 $ns2 0 ""; then
+if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 0 ""; then
 	echo "FAIL: flow offload for ns1/ns2 with dscp update" 1>&2
 	exit 0
 fi
 
-if ! test_tcp_forwarding_nat $ns1 $ns2 0 ""; then
+if ! test_tcp_forwarding_nat "$ns1" "$ns2" 0 ""; then
 	echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2
-	ip netns exec $nsr1 nft list ruleset
+	ip netns exec "$nsr1" nft list ruleset
 	ret=1
 fi
 
@@ -528,35 +509,40 @@ fi
 # Same as second test, but with PMTU discovery enabled. This
 # means that we expect the fastpath to handle packets as soon
 # as the endpoints adjust the packet size.
-ip netns exec $ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
-ip netns exec $ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
+ip netns exec "$ns1" sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
+ip netns exec "$ns2" sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
 
 # reset counters.
 # With pmtu in-place we'll also check that nft counters
 # are lower than file size and packets were forwarded via flowtable layer.
 # For earlier tests (large mtus), packets cannot be handled via flowtable
 # (except pure acks and other small packets).
-ip netns exec $nsr1 nft reset counters table inet filter >/dev/null
+ip netns exec "$nsr1" nft reset counters table inet filter >/dev/null
 
-if ! test_tcp_forwarding_nat $ns1 $ns2 1 ""; then
+if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 ""; then
 	echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2
-	ip netns exec $nsr1 nft list ruleset
+	ip netns exec "$nsr1" nft list ruleset
 fi
 
 # Another test:
 # Add bridge interface br0 to Router1, with NAT enabled.
-ip -net $nsr1 link add name br0 type bridge
-ip -net $nsr1 addr flush dev veth0
-ip -net $nsr1 link set up dev veth0
-ip -net $nsr1 link set veth0 master br0
-ip -net $nsr1 addr add 10.0.1.1/24 dev br0
-ip -net $nsr1 addr add dead:1::1/64 dev br0
-ip -net $nsr1 link set up dev br0
+test_bridge() {
+if ! ip -net "$nsr1" link add name br0 type bridge 2>/dev/null;then
+	echo "SKIP: could not add bridge br0"
+	[ "$ret" -eq 0 ] && ret=$ksft_skip
+	return
+fi
+ip -net "$nsr1" addr flush dev veth0
+ip -net "$nsr1" link set up dev veth0
+ip -net "$nsr1" link set veth0 master br0
+ip -net "$nsr1" addr add 10.0.1.1/24 dev br0
+ip -net "$nsr1" addr add dead:1::1/64 dev br0 nodad
+ip -net "$nsr1" link set up dev br0
 
-ip netns exec $nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null
+ip netns exec "$nsr1" sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null
 
 # br0 with NAT enabled.
-ip netns exec $nsr1 nft -f - <<EOF
+ip netns exec "$nsr1" nft -f - <<EOF
 flush table ip nat
 table ip nat {
    chain prerouting {
@@ -571,56 +557,59 @@ table ip nat {
 }
 EOF
 
-if ! test_tcp_forwarding_nat $ns1 $ns2 1 "on bridge"; then
+if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 "on bridge"; then
 	echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2
-	ip netns exec $nsr1 nft list ruleset
+	ip netns exec "$nsr1" nft list ruleset
 	ret=1
 fi
 
 
 # Another test:
 # Add bridge interface br0 to Router1, with NAT and VLAN.
-ip -net $nsr1 link set veth0 nomaster
-ip -net $nsr1 link set down dev veth0
-ip -net $nsr1 link add link veth0 name veth0.10 type vlan id 10
-ip -net $nsr1 link set up dev veth0
-ip -net $nsr1 link set up dev veth0.10
-ip -net $nsr1 link set veth0.10 master br0
-
-ip -net $ns1 addr flush dev eth0
-ip -net $ns1 link add link eth0 name eth0.10 type vlan id 10
-ip -net $ns1 link set eth0 up
-ip -net $ns1 link set eth0.10 up
-ip -net $ns1 addr add 10.0.1.99/24 dev eth0.10
-ip -net $ns1 route add default via 10.0.1.1
-ip -net $ns1 addr add dead:1::99/64 dev eth0.10
-
-if ! test_tcp_forwarding_nat $ns1 $ns2 1 "bridge and VLAN"; then
+ip -net "$nsr1" link set veth0 nomaster
+ip -net "$nsr1" link set down dev veth0
+ip -net "$nsr1" link add link veth0 name veth0.10 type vlan id 10
+ip -net "$nsr1" link set up dev veth0
+ip -net "$nsr1" link set up dev veth0.10
+ip -net "$nsr1" link set veth0.10 master br0
+
+ip -net "$ns1" addr flush dev eth0
+ip -net "$ns1" link add link eth0 name eth0.10 type vlan id 10
+ip -net "$ns1" link set eth0 up
+ip -net "$ns1" link set eth0.10 up
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0.10
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns1" addr add dead:1::99/64 dev eth0.10 nodad
+
+if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 "bridge and VLAN"; then
 	echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2
-	ip netns exec $nsr1 nft list ruleset
+	ip netns exec "$nsr1" nft list ruleset
 	ret=1
 fi
 
 # restore test topology (remove bridge and VLAN)
-ip -net $nsr1 link set veth0 nomaster
-ip -net $nsr1 link set veth0 down
-ip -net $nsr1 link set veth0.10 down
-ip -net $nsr1 link delete veth0.10 type vlan
-ip -net $nsr1 link delete br0 type bridge
-ip -net $ns1 addr flush dev eth0.10
-ip -net $ns1 link set eth0.10 down
-ip -net $ns1 link set eth0 down
-ip -net $ns1 link delete eth0.10 type vlan
+ip -net "$nsr1" link set veth0 nomaster
+ip -net "$nsr1" link set veth0 down
+ip -net "$nsr1" link set veth0.10 down
+ip -net "$nsr1" link delete veth0.10 type vlan
+ip -net "$nsr1" link delete br0 type bridge
+ip -net "$ns1" addr flush dev eth0.10
+ip -net "$ns1" link set eth0.10 down
+ip -net "$ns1" link set eth0 down
+ip -net "$ns1" link delete eth0.10 type vlan
 
 # restore address in ns1 and nsr1
-ip -net $ns1 link set eth0 up
-ip -net $ns1 addr add 10.0.1.99/24 dev eth0
-ip -net $ns1 route add default via 10.0.1.1
-ip -net $ns1 addr add dead:1::99/64 dev eth0
-ip -net $ns1 route add default via dead:1::1
-ip -net $nsr1 addr add 10.0.1.1/24 dev veth0
-ip -net $nsr1 addr add dead:1::1/64 dev veth0
-ip -net $nsr1 link set up dev veth0
+ip -net "$ns1" link set eth0 up
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad
+ip -net "$ns1" route add default via dead:1::1
+ip -net "$nsr1" addr add 10.0.1.1/24 dev veth0
+ip -net "$nsr1" addr add dead:1::1/64 dev veth0 nodad
+ip -net "$nsr1" link set up dev veth0
+}
+
+test_bridge
 
 KEY_SHA="0x"$(ps -af | sha1sum | cut -d " " -f 1)
 KEY_AES="0x"$(ps -af | md5sum | cut -d " " -f 1)
@@ -640,33 +629,43 @@ do_esp() {
     local spi_out=$6
     local spi_in=$7
 
-    ip -net $ns xfrm state add src $remote dst $me proto esp spi $spi_in  enc aes $KEY_AES  auth sha1 $KEY_SHA mode tunnel sel src $rnet dst $lnet
-    ip -net $ns xfrm state add src $me  dst $remote proto esp spi $spi_out enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $lnet dst $rnet
+    ip -net "$ns" xfrm state add src "$remote" dst "$me" proto esp spi "$spi_in"  enc aes "$KEY_AES"  auth sha1 "$KEY_SHA" mode tunnel sel src "$rnet" dst "$lnet"
+    ip -net "$ns" xfrm state add src "$me"  dst "$remote" proto esp spi "$spi_out" enc aes "$KEY_AES" auth sha1 "$KEY_SHA" mode tunnel sel src "$lnet" dst "$rnet"
 
     # to encrypt packets as they go out (includes forwarded packets that need encapsulation)
-    ip -net $ns xfrm policy add src $lnet dst $rnet dir out tmpl src $me dst $remote proto esp mode tunnel priority 1 action allow
+    ip -net "$ns" xfrm policy add src "$lnet" dst "$rnet" dir out tmpl src "$me" dst "$remote" proto esp mode tunnel priority 1 action allow
     # to fwd decrypted packets after esp processing:
-    ip -net $ns xfrm policy add src $rnet dst $lnet dir fwd tmpl src $remote dst $me proto esp mode tunnel priority 1 action allow
-
+    ip -net "$ns" xfrm policy add src "$rnet" dst "$lnet" dir fwd tmpl src "$remote" dst "$me" proto esp mode tunnel priority 1 action allow
 }
 
-do_esp $nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2
+do_esp "$nsr1" 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 "$SPI1" "$SPI2"
 
-do_esp $nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1
+do_esp "$nsr2" 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 "$SPI2" "$SPI1"
 
-ip netns exec $nsr1 nft delete table ip nat
+ip netns exec "$nsr1" nft delete table ip nat
 
 # restore default routes
-ip -net $ns2 route del 192.168.10.1 via 10.0.2.1
-ip -net $ns2 route add default via 10.0.2.1
-ip -net $ns2 route add default via dead:2::1
+ip -net "$ns2" route del 192.168.10.1 via 10.0.2.1
+ip -net "$ns2" route add default via 10.0.2.1
+ip -net "$ns2" route add default via dead:2::1
 
-if test_tcp_forwarding $ns1 $ns2; then
+if test_tcp_forwarding "$ns1" "$ns2"; then
 	check_counters "ipsec tunnel mode for ns1/ns2"
 else
 	echo "FAIL: ipsec tunnel mode for ns1/ns2"
-	ip netns exec $nsr1 nft list ruleset 1>&2
-	ip netns exec $nsr1 cat /proc/net/xfrm_stat 1>&2
+	ip netns exec "$nsr1" nft list ruleset 1>&2
+	ip netns exec "$nsr1" cat /proc/net/xfrm_stat 1>&2
+fi
+
+if [ "$1" = "" ]; then
+	low=1280
+	mtu=$((65536 - low))
+	o=$(((RANDOM%mtu) + low))
+	l=$(((RANDOM%mtu) + low))
+	r=$(((RANDOM%mtu) + low))
+
+	echo "re-run with random mtus: -o $o -l $l -r $r"
+	$0 -o "$o" -l "$l" -r "$r"
 fi
 
 exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_meta.sh b/tools/testing/selftests/net/netfilter/nft_meta.sh
index f33154c04d34..71505b6cb252 100755
--- a/tools/testing/selftests/netfilter/nft_meta.sh
+++ b/tools/testing/selftests/net/netfilter/nft_meta.sh
@@ -91,10 +91,10 @@ check_one_counter()
 	local want="packets $2"
 	local verbose="$3"
 
-	if ! ip netns exec "$ns0" nft list counter inet filter $cname | grep -q "$want"; then
+	if ! ip netns exec "$ns0" nft list counter inet filter "$cname" | grep -q "$want"; then
 		echo "FAIL: $cname, want \"$want\", got"
 		ret=1
-		ip netns exec "$ns0" nft list counter inet filter $cname
+		ip netns exec "$ns0" nft list counter inet filter "$cname"
 	fi
 }
 
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/net/netfilter/nft_nat.sh
index dd40d9f6f259..9e39de26455f 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/net/netfilter/nft_nat.sh
@@ -3,77 +3,60 @@
 # This test is for basic NAT functionality: snat, dnat, redirect, masquerade.
 #
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
+
 ret=0
 test_inet_nat=true
 
-sfx=$(mktemp -u "XXXXXXXX")
-ns0="ns0-$sfx"
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
+checktool "nft --version" "run test without nft tool"
+checktool "socat -h" "run test without socat"
 
 cleanup()
 {
-	for i in 0 1 2; do ip netns del ns$i-"$sfx";done
-}
+	ip netns pids "$ns0" | xargs kill 2>/dev/null
+	ip netns pids "$ns1" | xargs kill 2>/dev/null
+	ip netns pids "$ns2" | xargs kill 2>/dev/null
 
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
+	rm -f "$INFILE" "$OUTFILE"
 
-ip netns add "$ns0"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace $ns0"
-	exit $ksft_skip
-fi
+	cleanup_all_ns
+}
 
 trap cleanup EXIT
 
-ip netns add "$ns1"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace $ns1"
-	exit $ksft_skip
-fi
+INFILE=$(mktemp)
+OUTFILE=$(mktemp)
 
-ip netns add "$ns2"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace $ns2"
-	exit $ksft_skip
-fi
+setup_ns ns0 ns1 ns2
 
-ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1
-if [ $? -ne 0 ];then
+if ! ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1;then
     echo "SKIP: No virtual ethernet pair device support in kernel"
     exit $ksft_skip
 fi
 ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2"
 
-ip -net "$ns0" link set lo up
 ip -net "$ns0" link set veth0 up
 ip -net "$ns0" addr add 10.0.1.1/24 dev veth0
-ip -net "$ns0" addr add dead:1::1/64 dev veth0
+ip -net "$ns0" addr add dead:1::1/64 dev veth0 nodad
 
 ip -net "$ns0" link set veth1 up
 ip -net "$ns0" addr add 10.0.2.1/24 dev veth1
-ip -net "$ns0" addr add dead:2::1/64 dev veth1
-
-for i in 1 2; do
-  ip -net ns$i-$sfx link set lo up
-  ip -net ns$i-$sfx link set eth0 up
-  ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0
-  ip -net ns$i-$sfx route add default via 10.0.$i.1
-  ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0
-  ip -net ns$i-$sfx route add default via dead:$i::1
-done
+ip -net "$ns0" addr add dead:2::1/64 dev veth1 nodad
+
+do_config()
+{
+	ns="$1"
+	subnet="$2"
+
+	ip -net "$ns" link set eth0 up
+	ip -net "$ns" addr add "10.0.$subnet.99/24" dev eth0
+	ip -net "$ns" route add default via "10.0.$subnet.1"
+	ip -net "$ns" addr add "dead:$subnet::99/64" dev eth0 nodad
+	ip -net "$ns" route add default via "dead:$subnet::1"
+}
+
+do_config "$ns1" 1
+do_config "$ns2" 2
 
 bad_counter()
 {
@@ -83,7 +66,7 @@ bad_counter()
 	local tag=$4
 
 	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2
-	ip netns exec $ns nft list counter inet filter $counter 1>&2
+	ip netns exec "$ns" nft list counter inet filter "$counter" 1>&2
 }
 
 check_counters()
@@ -91,26 +74,23 @@ check_counters()
 	ns=$1
 	local lret=0
 
-	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
-	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1"
+	if ! ip netns exec "$ns" nft list counter inet filter ns0in | grep -q "packets 1 bytes 84";then
+		bad_counter "$ns" ns0in "packets 1 bytes 84" "check_counters 1"
 		lret=1
 	fi
-	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
-	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2"
+
+	if ! ip netns exec "$ns" nft list counter inet filter ns0out | grep -q "packets 1 bytes 84";then
+		bad_counter "$ns" ns0out "packets 1 bytes 84" "check_counters 2"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
-	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
-	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0in6 "$expect" "check_counters 3"
+	if ! ip netns exec "$ns" nft list counter inet filter ns0in6 | grep -q "$expect";then
+		bad_counter "$ns" ns0in6 "$expect" "check_counters 3"
 		lret=1
 	fi
-	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
-	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0out6 "$expect" "check_counters 4"
+	if ! ip netns exec "$ns" nft list counter inet filter ns0out6 | grep -q "$expect";then
+		bad_counter "$ns" ns0out6 "$expect" "check_counters 4"
 		lret=1
 	fi
 
@@ -122,41 +102,35 @@ check_ns0_counters()
 	local ns=$1
 	local lret=0
 
-	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0";then
 		bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1"
 		lret=1
 	fi
 
-	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0";then
 		bad_counter "$ns0" ns0in6 "packets 0 bytes 0"
 		lret=1
 	fi
 
-	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0";then
 		bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2"
 		lret=1
 	fi
-	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0";then
 		bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 "
 		lret=1
 	fi
 
 	for dir in "in" "out" ; do
 		expect="packets 1 bytes 84"
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4"
+		if ! ip netns exec "$ns0" nft list counter inet filter "${ns}${dir}" | grep -q "$expect";then
+			bad_counter "$ns0" "$ns${dir}" "$expect" "check_ns0_counters 4"
 			lret=1
 		fi
 
 		expect="packets 1 bytes 104"
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5"
+		if ! ip netns exec "$ns0" nft list counter inet filter "${ns}${dir}6" | grep -q "$expect";then
+			bad_counter "$ns0" "$ns${dir}6" "$expect" "check_ns0_counters 5"
 			lret=1
 		fi
 	done
@@ -166,8 +140,8 @@ check_ns0_counters()
 
 reset_counters()
 {
-	for i in 0 1 2;do
-		ip netns exec ns$i-$sfx nft reset counters inet > /dev/null
+	for i in "$ns0" "$ns1" "$ns2" ;do
+		ip netns exec "$i" nft reset counters inet > /dev/null
 	done
 }
 
@@ -177,7 +151,7 @@ test_local_dnat6()
 	local lret=0
 	local IPF=""
 
-	if [ $family = "inet" ];then
+	if [ "$family" = "inet" ];then
 		IPF="ip6"
 	fi
 
@@ -195,8 +169,7 @@ EOF
 	fi
 
 	# ping netns1, expect rewrite to netns2
-	ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null;then
 		lret=1
 		echo "ERROR: ping6 failed"
 		return $lret
@@ -204,8 +177,7 @@ EOF
 
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
 			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1"
 			lret=1
 		fi
@@ -213,8 +185,7 @@ EOF
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2"
 			lret=1
 		fi
@@ -223,8 +194,7 @@ EOF
 	# expect 0 count in ns1
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3"
 			lret=1
 		fi
@@ -233,8 +203,7 @@ EOF
 	# expect 1 packet in ns2
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then
 			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4"
 			lret=1
 		fi
@@ -252,7 +221,7 @@ test_local_dnat()
 	local lret=0
 	local IPF=""
 
-	if [ $family = "inet" ];then
+	if [ "$family" = "inet" ];then
 		IPF="ip"
 	fi
 
@@ -265,7 +234,7 @@ table $family nat {
 }
 EOF
 	if [ $? -ne 0 ]; then
-		if [ $family = "inet" ];then
+		if [ "$family" = "inet" ];then
 			echo "SKIP: inet nat tests"
 			test_inet_nat=false
 			return $ksft_skip
@@ -275,8 +244,7 @@ EOF
 	fi
 
 	# ping netns1, expect rewrite to netns2
-	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null;then
 		lret=1
 		echo "ERROR: ping failed"
 		return $lret
@@ -284,18 +252,16 @@ EOF
 
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1"
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
+			bad_counter "$ns0" "ns1$dir" "$expect" "test_local_dnat 1"
 			lret=1
 		fi
 	done
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2"
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
+			bad_counter "$ns0" "ns2$dir" "$expect" "test_local_dnat 2"
 			lret=1
 		fi
 	done
@@ -303,9 +269,8 @@ EOF
 	# expect 0 count in ns1
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3"
+		if ! ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect";then
+			bad_counter "$ns1" "ns0$dir" "$expect" "test_local_dnat 3"
 			lret=1
 		fi
 	done
@@ -313,20 +278,18 @@ EOF
 	# expect 1 packet in ns2
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4"
+		if ! ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect";then
+			bad_counter "$ns2" "ns0$dir" "$expect" "test_local_dnat 4"
 			lret=1
 		fi
 	done
 
 	test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2"
 
-	ip netns exec "$ns0" nft flush chain $family nat output
+	ip netns exec "$ns0" nft flush chain "$family" nat output
 
 	reset_counters
-	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null;then
 		lret=1
 		echo "ERROR: ping failed"
 		return $lret
@@ -334,16 +297,14 @@ EOF
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5"
 			lret=1
 		fi
 	done
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6"
 			lret=1
 		fi
@@ -352,8 +313,7 @@ EOF
 	# expect 1 count in ns1
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then
 			bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7"
 			lret=1
 		fi
@@ -362,8 +322,7 @@ EOF
 	# expect 0 packet in ns2
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then
 			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8"
 			lret=1
 		fi
@@ -374,13 +333,19 @@ EOF
 	return $lret
 }
 
+listener_ready()
+{
+	local ns="$1"
+	local port="$2"
+	local proto="$3"
+	ss -N "$ns" -ln "$proto" -o "sport = :$port" | grep -q "$port"
+}
+
 test_local_dnat_portonly()
 {
 	local family=$1
 	local daddr=$2
 	local lret=0
-	local sr_s
-	local sr_r
 
 ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
@@ -392,7 +357,7 @@ table $family nat {
 }
 EOF
 	if [ $? -ne 0 ]; then
-		if [ $family = "inet" ];then
+		if [ "$family" = "inet" ];then
 			echo "SKIP: inet port test"
 			test_inet_nat=false
 			return
@@ -401,17 +366,16 @@ EOF
 		return
 	fi
 
-	echo SERVER-$family | ip netns exec "$ns1" timeout 5 socat -u STDIN TCP-LISTEN:2000 &
-	sc_s=$!
+	echo "SERVER-$family" | ip netns exec "$ns1" timeout 3 socat -u STDIN TCP-LISTEN:2000 &
 
-	sleep 1
+	busywait $BUSYWAIT_TIMEOUT listener_ready "$ns1" 2000 "-t"
 
-	result=$(ip netns exec "$ns0" timeout 1 socat TCP:$daddr:2000 STDOUT)
+	result=$(ip netns exec "$ns0" timeout 1 socat -u TCP:"$daddr":2000 STDOUT)
 
 	if [ "$result" = "SERVER-inet" ];then
 		echo "PASS: inet port rewrite without l3 address"
 	else
-		echo "ERROR: inet port rewrite"
+		echo "ERROR: inet port rewrite without l3 address, got $result"
 		ret=1
 	fi
 }
@@ -424,24 +388,20 @@ test_masquerade6()
 
 	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 
-	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6"
 		return 1
-		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1"
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
+			bad_counter "$ns1" "ns2$dir" "$expect" "test_masquerade6 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2"
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
+			bad_counter "$ns2" "ns1$dir" "$expect" "test_masquerade6 2"
 			lret=1
 		fi
 	done
@@ -462,8 +422,7 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
 		lret=1
 	fi
@@ -471,14 +430,12 @@ EOF
 	# ns1 should have seen packets from ns0, due to masquerade
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
 			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4"
 			lret=1
 		fi
@@ -487,27 +444,23 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6"
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
+			bad_counter "$ns0" "ns1$dir" "$expect" "test_masquerade6 6"
 			lret=1
 		fi
 	done
 
-	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)"
 		lret=1
 	fi
 
-	ip netns exec "$ns0" nft flush chain $family nat postrouting
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft flush chain "$family" nat postrouting;then
 		echo "ERROR: Could not flush $family nat postrouting" 1>&2
 		lret=1
 	fi
@@ -526,23 +479,20 @@ test_masquerade()
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping $ns1 from "$ns2" $natflags"
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then
+		echo "ERROR: cannot ping $ns1 from $ns2 $natflags"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1"
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
+			bad_counter "$ns1" "ns2$dir" "$expect" "test_masquerade 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2"
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
+			bad_counter "$ns2" "ns1$dir" "$expect" "test_masquerade 2"
 			lret=1
 		fi
 	done
@@ -563,8 +513,7 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
 		lret=1
 	fi
@@ -572,15 +521,13 @@ EOF
 	# ns1 should have seen packets from ns0, due to masquerade
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3"
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns0${dir}" | grep -q "$expect";then
+			bad_counter "$ns1" "ns0$dir" "$expect" "test_masquerade 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4"
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
+			bad_counter "$ns2" "ns1$dir" "$expect" "test_masquerade 4"
 			lret=1
 		fi
 	done
@@ -588,27 +535,23 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5"
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
+			bad_counter "$ns1" "ns0$dir" "$expect" "test_masquerade 5"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6"
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
+			bad_counter "$ns0" "ns1$dir" "$expect" "test_masquerade 6"
 			lret=1
 		fi
 	done
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)"
 		lret=1
 	fi
 
-	ip netns exec "$ns0" nft flush chain $family nat postrouting
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft flush chain "$family" nat postrouting; then
 		echo "ERROR: Could not flush $family nat postrouting" 1>&2
 		lret=1
 	fi
@@ -625,22 +568,19 @@ test_redirect6()
 
 	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 
-	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then
 		echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns2" nft list counter inet filter "ns1${dir}" | grep -q "$expect";then
 			bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2"
 			lret=1
 		fi
@@ -662,8 +602,7 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect"
 		lret=1
 	fi
@@ -671,8 +610,7 @@ EOF
 	# ns1 should have seen no packets from ns2, due to redirection
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3"
 			lret=1
 		fi
@@ -681,15 +619,13 @@ EOF
 	# ns0 should have seen packets from ns2, due to masquerade
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4"
 			lret=1
 		fi
 	done
 
-	ip netns exec "$ns0" nft delete table $family nat
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft delete table "$family" nat;then
 		echo "ERROR: Could not delete $family nat table" 1>&2
 		lret=1
 	fi
@@ -707,22 +643,19 @@ test_redirect()
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
-			bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1"
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
+			bad_counter "$ns1" "$ns2$dir" "$expect" "test_redirect 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect";then
 			bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2"
 			lret=1
 		fi
@@ -744,8 +677,7 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect"
 		lret=1
 	fi
@@ -754,8 +686,7 @@ EOF
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
 
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3"
 			lret=1
 		fi
@@ -764,15 +695,13 @@ EOF
 	# ns0 should have seen packets from ns2, due to masquerade
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter "ns2${dir}" | grep -q "$expect";then
 			bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4"
 			lret=1
 		fi
 	done
 
-	ip netns exec "$ns0" nft delete table $family nat
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft delete table "$family" nat;then
 		echo "ERROR: Could not delete $family nat table" 1>&2
 		lret=1
 	fi
@@ -803,13 +732,13 @@ test_port_shadow()
 	# make shadow entry, from client (ns2), going to (ns1), port 41404, sport 1405.
 	echo "fake-entry" | ip netns exec "$ns2" timeout 1 socat -u STDIN UDP:"$daddrc":41404,sourceport=1405
 
-	echo ROUTER | ip netns exec "$ns0" timeout 5 socat -u STDIN UDP4-LISTEN:1405 &
-	sc_r=$!
+	echo ROUTER | ip netns exec "$ns0" timeout 3 socat -T 3 -u STDIN UDP4-LISTEN:1405 2>/dev/null &
+	local sc_r=$!
+	echo CLIENT | ip netns exec "$ns2" timeout 3 socat -T 3 -u STDIN UDP4-LISTEN:1405,reuseport 2>/dev/null &
+	local sc_c=$!
 
-	echo CLIENT | ip netns exec "$ns2" timeout 5 socat -u STDIN UDP4-LISTEN:1405,reuseport &
-	sc_c=$!
-
-	sleep 0.3
+	busywait $BUSYWAIT_TIMEOUT listener_ready "$ns0" 1405 "-u"
+	busywait $BUSYWAIT_TIMEOUT listener_ready "$ns2" 1405 "-u"
 
 	# ns1 tries to connect to ns0:1405.  With default settings this should connect
 	# to client, it matches the conntrack entry created above.
@@ -846,7 +775,7 @@ table $family filter {
 EOF
 	test_port_shadow "port-filter" "ROUTER"
 
-	ip netns exec "$ns0" nft delete table $family filter
+	ip netns exec "$ns0" nft delete table "$family" filter
 }
 
 # This prevents port shadow of router service via notrack.
@@ -868,7 +797,7 @@ table $family raw {
 EOF
 	test_port_shadow "port-notrack" "ROUTER"
 
-	ip netns exec "$ns0" nft delete table $family raw
+	ip netns exec "$ns0" nft delete table "$family" raw
 }
 
 # This prevents port shadow of router service via sport remap.
@@ -886,21 +815,19 @@ table $family pat {
 EOF
 	test_port_shadow "pat" "ROUTER"
 
-	ip netns exec "$ns0" nft delete table $family pat
+	ip netns exec "$ns0" nft delete table "$family" pat
 }
 
 test_port_shadowing()
 {
 	local family="ip"
 
-	conntrack -h >/dev/null 2>&1
-	if [ $? -ne 0 ];then
+	if ! conntrack -h >/dev/null 2>&1;then
 		echo "SKIP: Could not run nat port shadowing test without conntrack tool"
 		return
 	fi
 
-	socat -h > /dev/null 2>&1
-	if [ $? -ne 0 ];then
+	if ! socat -h > /dev/null 2>&1;then
 		echo "SKIP: Could not run nat port shadowing test without socat tool"
 		return
 	fi
@@ -946,8 +873,7 @@ test_stateless_nat_ip()
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
 	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null;then
 		echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules"
 		return 1
 	fi
@@ -981,23 +907,20 @@ EOF
 
 	reset_counters
 
-	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null; then
 		echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules"
 		lret=1
 	fi
 
 	# ns1 should have seen packets from .2.2, due to stateless rewrite.
 	expect="packets 1 bytes 84"
-	cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect";then
 		bad_counter "$ns1" ns0insl "$expect" "test_stateless 1"
 		lret=1
 	fi
 
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect";then
 			bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2"
 			lret=1
 		fi
@@ -1006,14 +929,12 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect";then
 			bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
-		if [ $? -ne 0 ]; then
+		if ! ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect";then
 			bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4"
 			lret=1
 		fi
@@ -1021,8 +942,7 @@ EOF
 
 	reset_counters
 
-	socat -h > /dev/null 2>&1
-	if [ $? -ne 0 ];then
+	if ! socat -h > /dev/null 2>&1;then
 		echo "SKIP: Could not run stateless nat frag test without socat tool"
 		if [ $lret -eq 0 ]; then
 			return $ksft_skip
@@ -1032,42 +952,36 @@ EOF
 		return $lret
 	fi
 
-	local tmpfile=$(mktemp)
-	dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null
+	dd if=/dev/urandom of="$INFILE" bs=4096 count=1 2>/dev/null
 
-	local outfile=$(mktemp)
-	ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null &
-	sc_r=$!
+	ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:"$OUTFILE" < /dev/null 2>/dev/null &
+
+	busywait $BUSYWAIT_TIMEOUT listener_ready "$ns1" 4233 "-u"
 
-	sleep 1
 	# re-do with large ping -> ip fragmentation
-	ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null
-	if [ $? -ne 0 ] ; then
+	if ! ip netns exec "$ns2" timeout 3 socat -u STDIN UDP4-SENDTO:"10.0.1.99:4233" < "$INFILE" > /dev/null;then
 		echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2
 		lret=1
 	fi
 
 	wait
 
-	cmp "$tmpfile" "$outfile"
-	if [ $? -ne 0 ]; then
-		ls -l "$tmpfile" "$outfile"
+	if ! cmp "$INFILE" "$OUTFILE";then
+		ls -l "$INFILE" "$OUTFILE"
 		echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2
 		lret=1
 	fi
 
-	rm -f "$tmpfile" "$outfile"
+	:> "$OUTFILE"
 
 	# ns1 should have seen packets from 2.2, due to stateless rewrite.
 	expect="packets 3 bytes 4164"
-	cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect")
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect";then
 		bad_counter "$ns1" ns0insl "$expect" "test_stateless 5"
 		lret=1
 	fi
 
-	ip netns exec "$ns0" nft delete table ip stateless
-	if [ $? -ne 0 ]; then
+	if ! ip netns exec "$ns0" nft delete table ip stateless; then
 		echo "ERROR: Could not delete table ip stateless" 1>&2
 		lret=1
 	fi
@@ -1078,8 +992,8 @@ EOF
 }
 
 # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
-for i in 0 1 2; do
-ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
+for i in "$ns0" "$ns1" "$ns2" ;do
+ip netns exec "$i" nft -f /dev/stdin <<EOF
 table inet filter {
 	counter ns0in {}
 	counter ns1in {}
@@ -1145,7 +1059,7 @@ done
 
 # special case for stateless nat check, counter needs to
 # be done before (input) ip defragmentation
-ip netns exec ns1-$sfx nft -f /dev/stdin <<EOF
+ip netns exec "$ns1" nft -f /dev/stdin <<EOF
 table inet filter {
 	counter ns0insl {}
 
@@ -1156,31 +1070,49 @@ table inet filter {
 }
 EOF
 
-sleep 3
-# test basic connectivity
-for i in 1 2; do
-  ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null
-  if [ $? -ne 0 ];then
-  	echo "ERROR: Could not reach other namespace(s)" 1>&2
-	ret=1
-  fi
-
-  ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null
-  if [ $? -ne 0 ];then
-	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
-	ret=1
-  fi
-  check_counters ns$i-$sfx
-  if [ $? -ne 0 ]; then
-	ret=1
-  fi
-
-  check_ns0_counters ns$i
-  if [ $? -ne 0 ]; then
-	ret=1
-  fi
-  reset_counters
-done
+ping_basic()
+{
+	i="$1"
+	if ! ip netns exec "$ns0" ping -c 1 -q 10.0."$i".99 > /dev/null;then
+		echo "ERROR: Could not reach other namespace(s)" 1>&2
+		ret=1
+	fi
+
+	if ! ip netns exec "$ns0" ping -c 1 -q dead:"$i"::99 > /dev/null;then
+		echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
+		ret=1
+	fi
+}
+
+test_basic_conn()
+{
+	local nsexec
+	name="$1"
+
+	nsexec=$(eval echo \$"$1")
+
+	ping_basic 1
+	ping_basic 2
+
+	if ! check_counters "$nsexec";then
+		return 1
+	fi
+
+	if ! check_ns0_counters "$name";then
+		return 1
+	fi
+
+	reset_counters
+	return 0
+}
+
+if ! test_basic_conn "ns1" ; then
+	echo "ERROR: basic test for ns1 failed" 1>&2
+	exit 1
+fi
+if ! test_basic_conn "ns2"; then
+	echo "ERROR: basic test for ns1 failed" 1>&2
+fi
 
 if [ $ret -eq 0 ];then
 	echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2"
diff --git a/tools/testing/selftests/netfilter/nft_nat_zones.sh b/tools/testing/selftests/net/netfilter/nft_nat_zones.sh
index b9ab37380f33..3b81d88bdde3 100755
--- a/tools/testing/selftests/netfilter/nft_nat_zones.sh
+++ b/tools/testing/selftests/net/netfilter/nft_nat_zones.sh
@@ -3,17 +3,17 @@
 # Test connection tracking zone and NAT source port reallocation support.
 #
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
 
 # Don't increase too much, 2000 clients should work
 # just fine but script can then take several minutes with
 # KASAN/debug builds.
 maxclients=100
 
-have_iperf=1
+have_socat=0
 ret=0
 
+[ "$KSFT_MACHINE_SLOW" = yes ] && maxclients=40
 # client1---.
 #            veth1-.
 #                  |
@@ -31,12 +31,6 @@ ret=0
 #   NAT Gateway is supposed to do port reallocation for each of the
 #   connections.
 
-sfx=$(mktemp -u "XXXXXXXX")
-gw="ns-gw-$sfx"
-cl1="ns-cl1-$sfx"
-cl2="ns-cl2-$sfx"
-srv="ns-srv-$sfx"
-
 v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null)
 v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null)
 v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null)
@@ -46,61 +40,29 @@ v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null)
 
 cleanup()
 {
-	ip netns del $gw
-	ip netns del $srv
-	for i in $(seq 1 $maxclients); do
-		ip netns del ns-cl$i-$sfx 2>/dev/null
-	done
-
-	sysctl -q net.ipv4.neigh.default.gc_thresh1=$v4gc1 2>/dev/null
-	sysctl -q net.ipv4.neigh.default.gc_thresh2=$v4gc2 2>/dev/null
-	sysctl -q net.ipv4.neigh.default.gc_thresh3=$v4gc3 2>/dev/null
-	sysctl -q net.ipv6.neigh.default.gc_thresh1=$v6gc1 2>/dev/null
-	sysctl -q net.ipv6.neigh.default.gc_thresh2=$v6gc2 2>/dev/null
-	sysctl -q net.ipv6.neigh.default.gc_thresh3=$v6gc3 2>/dev/null
+	cleanup_all_ns
+
+	sysctl -q net.ipv4.neigh.default.gc_thresh1="$v4gc1" 2>/dev/null
+	sysctl -q net.ipv4.neigh.default.gc_thresh2="$v4gc2" 2>/dev/null
+	sysctl -q net.ipv4.neigh.default.gc_thresh3="$v4gc3" 2>/dev/null
+	sysctl -q net.ipv6.neigh.default.gc_thresh1="$v6gc1" 2>/dev/null
+	sysctl -q net.ipv6.neigh.default.gc_thresh2="$v6gc2" 2>/dev/null
+	sysctl -q net.ipv6.neigh.default.gc_thresh3="$v6gc3" 2>/dev/null
 }
 
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
+checktool "nft --version" echo "run test without nft tool"
+checktool "conntrack -V" "run test without conntrack tool"
 
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
+if socat -h >/dev/null 2>&1; then
+	have_socat=1
 fi
 
-conntrack -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without conntrack tool"
-	exit $ksft_skip
-fi
-
-iperf3 -v >/dev/null 2>&1
-if [ $? -ne 0 ];then
-	have_iperf=0
-fi
-
-ip netns add "$gw"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace $gw"
-	exit $ksft_skip
-fi
-ip -net "$gw" link set lo up
+setup_ns gw srv
 
 trap cleanup EXIT
 
-ip netns add "$srv"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create server netns $srv"
-	exit $ksft_skip
-fi
-
 ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv"
 ip -net "$gw" link set veth0 up
-ip -net "$srv" link set lo up
 ip -net "$srv" link set eth0 up
 
 sysctl -q net.ipv6.neigh.default.gc_thresh1=512  2>/dev/null
@@ -110,55 +72,49 @@ sysctl -q net.ipv4.neigh.default.gc_thresh1=512  2>/dev/null
 sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null
 sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null
 
-for i in $(seq 1 $maxclients);do
-  cl="ns-cl$i-$sfx"
+for i in $(seq 1 "$maxclients");do
+  setup_ns "cl$i"
 
-  ip netns add "$cl"
-  if [ $? -ne 0 ];then
-     echo "SKIP: Could not create client netns $cl"
-     exit $ksft_skip
-  fi
-  ip link add veth$i netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1
-  if [ $? -ne 0 ];then
+  cl=$(eval echo \$cl"$i")
+  if ! ip link add veth"$i" netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1;then
     echo "SKIP: No virtual ethernet pair device support in kernel"
     exit $ksft_skip
   fi
 done
 
-for i in $(seq 1 $maxclients);do
-  cl="ns-cl$i-$sfx"
-  echo netns exec "$cl" ip link set lo up
+for i in $(seq 1 "$maxclients");do
+  cl=$(eval echo \$cl"$i")
   echo netns exec "$cl" ip link set eth0 up
   echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2
-  echo netns exec "$gw" ip link set veth$i up
-  echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.arp_ignore=2
-  echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.rp_filter=0
+  echo netns exec "$gw" ip link set "veth$i" up
+  echo netns exec "$gw" sysctl -q net.ipv4.conf.veth"$i".arp_ignore=2
+  echo netns exec "$gw" sysctl -q net.ipv4.conf.veth"$i".rp_filter=0
 
   # clients have same IP addresses.
   echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0
-  echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0
+  echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0 nodad
   echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0
   echo netns exec "$cl" ip route add default via dead:1::2 dev eth0
 
   # NB: same addresses on client-facing interfaces.
-  echo netns exec "$gw" ip addr add 10.1.0.2/24 dev veth$i
-  echo netns exec "$gw" ip addr add dead:1::2/64 dev veth$i
+  echo netns exec "$gw" ip addr add 10.1.0.2/24 dev "veth$i"
+  echo netns exec "$gw" ip addr add dead:1::2/64 dev "veth$i" nodad
 
   # gw: policy routing
-  echo netns exec "$gw" ip route add 10.1.0.0/24 dev veth$i table $((1000+i))
-  echo netns exec "$gw" ip route add dead:1::0/64 dev veth$i table $((1000+i))
+  echo netns exec "$gw" ip route add 10.1.0.0/24 dev "veth$i" table $((1000+i))
+  echo netns exec "$gw" ip route add dead:1::0/64 dev "veth$i" table $((1000+i))
   echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i))
   echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i))
-  echo netns exec "$gw" ip rule add fwmark $i lookup $((1000+i))
+  echo netns exec "$gw" ip rule add fwmark "$i" lookup $((1000+i))
 done | ip -batch /dev/stdin
 
 ip -net "$gw" addr add 10.3.0.1/24 dev veth0
-ip -net "$gw" addr add dead:3::1/64 dev veth0
+ip -net "$gw" addr add dead:3::1/64 dev veth0 nodad
 
 ip -net "$srv" addr add 10.3.0.99/24 dev eth0
-ip -net "$srv" addr add dead:3::99/64 dev eth0
+ip -net "$srv" addr add dead:3::99/64 dev eth0 nodad
 
-ip netns exec $gw nft -f /dev/stdin<<EOF
+ip netns exec "$gw" nft -f /dev/stdin<<EOF
 table inet raw {
 	map iiftomark {
 		type ifname : mark
@@ -203,18 +159,22 @@ table inet raw {
 	}
 }
 EOF
+if [ "$?" -ne 0 ];then
+	echo "SKIP: Could not add nftables rules"
+	exit $ksft_skip
+fi
 
 ( echo add element inet raw iiftomark \{
 	for i in $(seq 1 $((maxclients-1))); do
-		echo \"veth$i\" : $i,
+		echo \"veth"$i"\" : "$i",
 	done
-	echo \"veth$maxclients\" : $maxclients \}
+	echo \"veth"$maxclients"\" : "$maxclients" \}
 	echo add element inet raw iiftozone \{
 	for i in $(seq 1 $((maxclients-1))); do
-		echo \"veth$i\" : $i,
+		echo \"veth"$i"\" : "$i",
 	done
 	echo \"veth$maxclients\" : $maxclients \}
-) | ip netns exec $gw nft -f /dev/stdin
+) | ip netns exec "$gw" nft -f /dev/stdin
 
 ip netns exec "$gw" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
 ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null
@@ -224,73 +184,72 @@ ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null
 ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null
 ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null
 
-for i in $(seq 1 $maxclients); do
-  cl="ns-cl$i-$sfx"
-  ip netns exec $cl ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 &
-  if [ $? -ne 0 ]; then
-     echo FAIL: Ping failure from $cl 1>&2
-     ret=1
-     break
-  fi
+for i in $(seq 1 "$maxclients"); do
+  cl=$(eval echo \$cl"$i")
+  ip netns exec "$cl" ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 &
 done
 
-wait
+wait || ret=1
 
-for i in $(seq 1 $maxclients); do
-   ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }"
-   if [ $? -ne 0 ];then
+[ "$ret" -ne 0 ] && "FAIL: Ping failure from $cl" 1>&2
+
+for i in $(seq 1 "$maxclients"); do
+   if ! ip netns exec "$gw" nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }"; then
       ret=1
       echo "FAIL: counter icmp mismatch for veth$i" 1>&2
-      ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2
+      ip netns exec "$gw" nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2
       break
    fi
 done
 
-ip netns exec $gw nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }"
-if [ $? -ne 0 ];then
+if ! ip netns exec "$gw" nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * maxclients)) bytes $((252 * maxclients)) }"; then
     ret=1
-    echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }"
-    ip netns exec $gw nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2
+    echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * maxclients)) bytes $((252 * maxclients)) }"
+    ip netns exec "$gw" nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2
 fi
 
-if  [ $ret -eq 0 ]; then
+if [ $ret -eq 0 ]; then
 	echo "PASS: ping test from all $maxclients namespaces"
 fi
 
-if [ $have_iperf -eq 0 ];then
-	echo "SKIP: iperf3 not installed"
+if [ $have_socat -eq 0 ];then
+	echo "SKIP: socat not installed"
 	if [ $ret -ne 0 ];then
 	    exit $ret
 	fi
 	exit $ksft_skip
 fi
 
-ip netns exec $srv iperf3 -s > /dev/null 2>&1 &
-iperfpid=$!
-sleep 1
+listener_ready()
+{
+	ss -N "$1" -lnt -o "sport = :5201" | grep -q 5201
+}
+
+ip netns exec "$srv" socat -u TCP-LISTEN:5201,fork STDOUT > /dev/null 2>/dev/null &
+socatpid=$!
+
+busywait 1000 listener_ready "$srv"
 
-for i in $(seq 1 $maxclients); do
+for i in $(seq 1 "$maxclients"); do
   if [ $ret -ne 0 ]; then
      break
   fi
-  cl="ns-cl$i-$sfx"
-  ip netns exec $cl iperf3 -c 10.3.0.99 --cport 10000 -n 1 > /dev/null
-  if [ $? -ne 0 ]; then
-     echo FAIL: Failure to connect for $cl 1>&2
-     ip netns exec $gw conntrack -S 1>&2
+  cl=$(eval echo \$cl"$i")
+  if ! ip netns exec "$cl" socat -4 -u STDIN TCP:10.3.0.99:5201,sourceport=10000 < /dev/null > /dev/null; then
+     echo "FAIL: Failure to connect for $cl" 1>&2
+     ip netns exec "$gw" conntrack -S 1>&2
      ret=1
   fi
 done
 if [ $ret -eq 0 ];then
-	echo "PASS: iperf3 connections for all $maxclients net namespaces"
+	echo "PASS: socat connections for all $maxclients net namespaces"
 fi
 
-kill $iperfpid
+kill $socatpid
 wait
 
-for i in $(seq 1 $maxclients); do
-   ip netns exec $gw nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null
-   if [ $? -ne 0 ];then
+for i in $(seq 1 "$maxclients"); do
+   if ! ip netns exec "$gw" nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null;then
       ret=1
       echo "FAIL: can't find expected tcp entry for veth$i" 1>&2
       break
@@ -300,8 +259,7 @@ if [ $ret -eq 0 ];then
 	echo "PASS: Found client connection for all $maxclients net namespaces"
 fi
 
-ip netns exec $gw nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null
-if [ $? -ne 0 ];then
+if ! ip netns exec "$gw" nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null;then
     ret=1
     echo "FAIL: cannot find return entry on veth0" 1>&2
 fi
diff --git a/tools/testing/selftests/net/netfilter/nft_queue.sh b/tools/testing/selftests/net/netfilter/nft_queue.sh
new file mode 100755
index 000000000000..8538f08c64c2
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nft_queue.sh
@@ -0,0 +1,417 @@
+#!/bin/bash
+#
+# This tests nf_queue:
+# 1. can process packets from all hooks
+# 2. support running nfqueue from more than one base chain
+#
+# shellcheck disable=SC2162,SC2317
+
+source lib.sh
+ret=0
+timeout=2
+
+cleanup()
+{
+	ip netns pids "$ns1" | xargs kill 2>/dev/null
+	ip netns pids "$ns2" | xargs kill 2>/dev/null
+	ip netns pids "$nsrouter" | xargs kill 2>/dev/null
+
+	cleanup_all_ns
+
+	rm -f "$TMPINPUT"
+	rm -f "$TMPFILE0"
+	rm -f "$TMPFILE1"
+	rm -f "$TMPFILE2" "$TMPFILE3"
+}
+
+checktool "nft --version" "test without nft tool"
+
+trap cleanup EXIT
+
+setup_ns ns1 ns2 nsrouter
+
+TMPFILE0=$(mktemp)
+TMPFILE1=$(mktemp)
+TMPFILE2=$(mktemp)
+TMPFILE3=$(mktemp)
+
+TMPINPUT=$(mktemp)
+dd conv=sparse status=none if=/dev/zero bs=1M count=200 of="$TMPINPUT"
+
+if ! ip link add veth0 netns "$nsrouter" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1; then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
+ip link add veth1 netns "$nsrouter" type veth peer name eth0 netns "$ns2"
+
+ip -net "$nsrouter" link set veth0 up
+ip -net "$nsrouter" addr add 10.0.1.1/24 dev veth0
+ip -net "$nsrouter" addr add dead:1::1/64 dev veth0 nodad
+
+ip -net "$nsrouter" link set veth1 up
+ip -net "$nsrouter" addr add 10.0.2.1/24 dev veth1
+ip -net "$nsrouter" addr add dead:2::1/64 dev veth1 nodad
+
+ip -net "$ns1" link set eth0 up
+ip -net "$ns2" link set eth0 up
+
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns1" route add default via dead:1::1
+
+ip -net "$ns2" addr add 10.0.2.99/24 dev eth0
+ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad
+ip -net "$ns2" route add default via 10.0.2.1
+ip -net "$ns2" route add default via dead:2::1
+
+load_ruleset() {
+	local name=$1
+	local prio=$2
+
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
+table inet $name {
+	chain nfq {
+		ip protocol icmp queue bypass
+		icmpv6 type { "echo-request", "echo-reply" } queue num 1 bypass
+	}
+	chain pre {
+		type filter hook prerouting priority $prio; policy accept;
+		jump nfq
+	}
+	chain input {
+		type filter hook input priority $prio; policy accept;
+		jump nfq
+	}
+	chain forward {
+		type filter hook forward priority $prio; policy accept;
+		tcp dport 12345 queue num 2
+		jump nfq
+	}
+	chain output {
+		type filter hook output priority $prio; policy accept;
+		tcp dport 12345 queue num 3
+		tcp sport 23456 queue num 3
+		jump nfq
+	}
+	chain post {
+		type filter hook postrouting priority $prio; policy accept;
+		jump nfq
+	}
+}
+EOF
+}
+
+load_counter_ruleset() {
+	local prio=$1
+
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
+table inet countrules {
+	chain pre {
+		type filter hook prerouting priority $prio; policy accept;
+		counter
+	}
+	chain input {
+		type filter hook input priority $prio; policy accept;
+		counter
+	}
+	chain forward {
+		type filter hook forward priority $prio; policy accept;
+		counter
+	}
+	chain output {
+		type filter hook output priority $prio; policy accept;
+		counter
+	}
+	chain post {
+		type filter hook postrouting priority $prio; policy accept;
+		counter
+	}
+}
+EOF
+}
+
+test_ping() {
+  if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then
+	return 1
+  fi
+
+  if ! ip netns exec "$ns1" ping -c 1 -q dead:2::99 > /dev/null; then
+	return 2
+  fi
+
+  return 0
+}
+
+test_ping_router() {
+  if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.1 > /dev/null; then
+	return 3
+  fi
+
+  if ! ip netns exec "$ns1" ping -c 1 -q dead:2::1 > /dev/null; then
+	return 4
+  fi
+
+  return 0
+}
+
+test_queue_blackhole() {
+	local proto=$1
+
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
+table $proto blackh {
+	chain forward {
+	type filter hook forward priority 0; policy accept;
+		queue num 600
+	}
+}
+EOF
+	if [ "$proto" = "ip" ] ;then
+		ip netns exec "$ns1" ping -W 2 -c 1 -q 10.0.2.99 > /dev/null
+		lret=$?
+	elif [ "$proto" = "ip6" ]; then
+		ip netns exec "$ns1" ping -W 2 -c 1 -q dead:2::99 > /dev/null
+		lret=$?
+	else
+		lret=111
+	fi
+
+	# queue without bypass keyword should drop traffic if no listener exists.
+	if [ "$lret" -eq 0 ];then
+		echo "FAIL: $proto expected failure, got $lret" 1>&2
+		exit 1
+	fi
+
+	if ! ip netns exec "$nsrouter" nft delete table "$proto" blackh; then
+	        echo "FAIL: $proto: Could not delete blackh table"
+	        exit 1
+	fi
+
+        echo "PASS: $proto: statement with no listener results in packet drop"
+}
+
+nf_queue_wait()
+{
+	local procfile="/proc/self/net/netfilter/nfnetlink_queue"
+	local netns id
+
+	netns="$1"
+	id="$2"
+
+	# if this file doesn't exist, nfnetlink_module isn't loaded.
+	# rather than loading it ourselves, wait for kernel module autoload
+	# completion, nfnetlink should do so automatically because nf_queue
+	# helper program, spawned in the background, asked for this functionality.
+	test -f "$procfile" &&
+		ip netns exec "$netns" cat "$procfile" | grep -q "^ *$id "
+}
+
+test_queue()
+{
+	local expected="$1"
+	local last=""
+
+	# spawn nf_queue listeners
+	ip netns exec "$nsrouter" ./nf_queue -c -q 0 -t $timeout > "$TMPFILE0" &
+	ip netns exec "$nsrouter" ./nf_queue -c -q 1 -t $timeout > "$TMPFILE1" &
+
+	busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 0
+	busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 1
+
+	if ! test_ping;then
+		echo "FAIL: netns routing/connectivity with active listener on queues 0 and 1: $ret" 1>&2
+		exit $ret
+	fi
+
+	if ! test_ping_router;then
+		echo "FAIL: netns router unreachable listener on queue 0 and 1: $ret" 1>&2
+		exit $ret
+	fi
+
+	wait
+	ret=$?
+
+	for file in $TMPFILE0 $TMPFILE1; do
+		last=$(tail -n1 "$file")
+		if [ x"$last" != x"$expected packets total" ]; then
+			echo "FAIL: Expected $expected packets total, but got $last" 1>&2
+			ip netns exec "$nsrouter" nft list ruleset
+			exit 1
+		fi
+	done
+
+	echo "PASS: Expected and received $last"
+}
+
+listener_ready()
+{
+	ss -N "$1" -lnt -o "sport = :12345" | grep -q 12345
+}
+
+test_tcp_forward()
+{
+	ip netns exec "$nsrouter" ./nf_queue -q 2 -t "$timeout" &
+	local nfqpid=$!
+
+	timeout 5 ip netns exec "$ns2" socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
+	local rpid=$!
+
+	busywait "$BUSYWAIT_TIMEOUT" listener_ready "$ns2"
+
+	ip netns exec "$ns1" socat -u STDIN TCP:10.0.2.99:12345 <"$TMPINPUT" >/dev/null
+
+	wait "$rpid" && echo "PASS: tcp and nfqueue in forward chain"
+}
+
+test_tcp_localhost()
+{
+	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of="$TMPINPUT"
+	timeout 5 ip netns exec "$nsrouter" socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
+	local rpid=$!
+
+	ip netns exec "$nsrouter" ./nf_queue -q 3 -t "$timeout" &
+	local nfqpid=$!
+
+	busywait "$BUSYWAIT_TIMEOUT" listener_ready "$nsrouter"
+
+	ip netns exec "$nsrouter" socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" >/dev/null
+
+	wait "$rpid" && echo "PASS: tcp via loopback"
+	wait 2>/dev/null
+}
+
+test_tcp_localhost_connectclose()
+{
+	ip netns exec "$nsrouter" ./connect_close -p 23456 -t "$timeout" &
+	ip netns exec "$nsrouter" ./nf_queue -q 3 -t "$timeout" &
+
+	busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 3
+
+	wait && echo "PASS: tcp via loopback with connect/close"
+	wait 2>/dev/null
+}
+
+test_tcp_localhost_requeue()
+{
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
+flush ruleset
+table inet filter {
+	chain output {
+		type filter hook output priority 0; policy accept;
+		tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0
+	}
+	chain post {
+		type filter hook postrouting priority 0; policy accept;
+		tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0
+	}
+}
+EOF
+	timeout 5 ip netns exec "$nsrouter" socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
+	local rpid=$!
+
+	ip netns exec "$nsrouter" ./nf_queue -c -q 1 -t "$timeout" > "$TMPFILE2" &
+
+	# nfqueue 1 will be called via output hook.  But this time,
+        # re-queue the packet to nfqueue program on queue 2.
+	ip netns exec "$nsrouter" ./nf_queue -G -d 150 -c -q 0 -Q 1 -t "$timeout" > "$TMPFILE3" &
+
+	busywait "$BUSYWAIT_TIMEOUT" listener_ready "$nsrouter"
+	ip netns exec "$nsrouter" socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" > /dev/null
+
+	wait
+
+	if ! diff -u "$TMPFILE2" "$TMPFILE3" ; then
+		echo "FAIL: lost packets during requeue?!" 1>&2
+		return
+	fi
+
+	echo "PASS: tcp via loopback and re-queueing"
+}
+
+test_icmp_vrf() {
+	if ! ip -net "$ns1" link add tvrf type vrf table 9876;then
+		echo "SKIP: Could not add vrf device"
+		return
+	fi
+
+	ip -net "$ns1" li set eth0 master tvrf
+	ip -net "$ns1" li set tvrf up
+
+	ip -net "$ns1" route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876
+ip netns exec "$ns1" nft -f /dev/stdin <<EOF
+flush ruleset
+table inet filter {
+	chain output {
+		type filter hook output priority 0; policy accept;
+		meta oifname "tvrf" icmp type echo-request counter queue num 1
+		meta oifname "eth0" icmp type echo-request counter queue num 1
+	}
+	chain post {
+		type filter hook postrouting priority 0; policy accept;
+		meta oifname "tvrf" icmp type echo-request counter queue num 1
+		meta oifname "eth0" icmp type echo-request counter queue num 1
+	}
+}
+EOF
+	ip netns exec "$ns1" ./nf_queue -q 1 -t "$timeout" &
+	local nfqpid=$!
+
+	busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$ns1" 1
+
+	ip netns exec "$ns1" ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null
+
+	for n in output post; do
+		for d in tvrf eth0; do
+			if ! ip netns exec "$ns1" nft list chain inet filter "$n" | grep -q "oifname \"$d\" icmp type echo-request counter packets 1"; then
+				echo "FAIL: chain $n: icmp packet counter mismatch for device $d" 1>&2
+				ip netns exec "$ns1" nft list ruleset
+				ret=1
+				return
+			fi
+		done
+	done
+
+	wait "$nfqpid" && echo "PASS: icmp+nfqueue via vrf"
+	wait 2>/dev/null
+}
+
+ip netns exec "$nsrouter" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+load_ruleset "filter" 0
+
+if test_ping; then
+	# queue bypass works (rules were skipped, no listener)
+	echo "PASS: ${ns1} can reach ${ns2}"
+else
+	echo "FAIL: ${ns1} cannot reach ${ns2}: $ret" 1>&2
+	exit $ret
+fi
+
+test_queue_blackhole ip
+test_queue_blackhole ip6
+
+# dummy ruleset to add base chains between the
+# queueing rules.  We don't want the second reinject
+# to re-execute the old hooks.
+load_counter_ruleset 10
+
+# we are hooking all: prerouting/input/forward/output/postrouting.
+# we ping ${ns2} from ${ns1} via ${nsrouter} using ipv4 and ipv6, so:
+# 1x icmp prerouting,forward,postrouting -> 3 queue events (6 incl. reply).
+# 1x icmp prerouting,input,output postrouting -> 4 queue events incl. reply.
+# so we expect that userspace program receives 10 packets.
+test_queue 10
+
+# same.  We queue to a second program as well.
+load_ruleset "filter2" 20
+test_queue 20
+
+test_tcp_forward
+test_tcp_localhost
+test_tcp_localhost_connectclose
+test_tcp_localhost_requeue
+test_icmp_vrf
+
+exit $ret
diff --git a/tools/testing/selftests/net/netfilter/nft_synproxy.sh b/tools/testing/selftests/net/netfilter/nft_synproxy.sh
new file mode 100755
index 000000000000..293f667a6aec
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/nft_synproxy.sh
@@ -0,0 +1,96 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+source lib.sh
+
+ret=0
+
+checktool "nft --version" "run test without nft tool"
+checktool "iperf3 --version" "run test without iperf3"
+
+setup_ns nsr ns1 ns2
+
+modprobe -q nf_conntrack
+
+cleanup() {
+	ip netns pids "$ns1" | xargs kill 2>/dev/null
+	ip netns pids "$ns2" | xargs kill 2>/dev/null
+
+	cleanup_all_ns
+}
+
+trap cleanup EXIT
+
+ip link add veth0 netns "$nsr" type veth peer name eth0 netns "$ns1"
+ip link add veth1 netns "$nsr" type veth peer name eth0 netns "$ns2"
+
+for dev in veth0 veth1; do
+	ip -net "$nsr" link set "$dev" up
+done
+
+ip -net "$nsr" addr add 10.0.1.1/24 dev veth0
+ip -net "$nsr" addr add 10.0.2.1/24 dev veth1
+
+ip netns exec "$nsr" sysctl -q net.ipv4.conf.veth0.forwarding=1
+ip netns exec "$nsr" sysctl -q net.ipv4.conf.veth1.forwarding=1
+ip netns exec "$nsr" sysctl -q net.netfilter.nf_conntrack_tcp_loose=0
+
+for n in $ns1 $ns2; do
+  ip -net "$n" link set eth0 up
+done
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns2" addr add 10.0.2.99/24 dev eth0
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns2" route add default via 10.0.2.1
+
+# test basic connectivity
+if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then
+  echo "ERROR: $ns1 cannot reach $ns2" 1>&2
+  exit 1
+fi
+
+if ! ip netns exec "$ns2" ping -c 1 -q 10.0.1.99 > /dev/null; then
+  echo "ERROR: $ns2 cannot reach $ns1" 1>&2
+  exit 1
+fi
+
+ip netns exec "$ns2" iperf3 -s > /dev/null 2>&1 &
+# ip netns exec $nsr tcpdump -vvv -n -i veth1 tcp | head -n 10 &
+
+sleep 1
+
+ip netns exec "$nsr" nft -f - <<EOF
+table inet filter {
+   chain prerouting {
+      type filter hook prerouting priority -300; policy accept;
+      meta iif veth0 tcp flags syn counter notrack
+   }
+
+  chain forward {
+      type filter hook forward priority 0; policy accept;
+
+      ct state new,established counter accept
+
+      meta iif veth0 meta l4proto tcp ct state untracked,invalid synproxy mss 1460 sack-perm timestamp
+
+      ct state invalid counter drop
+
+      # make ns2 unreachable w.o. tcp synproxy
+      tcp flags syn counter drop
+   }
+}
+EOF
+if [ $? -ne 0 ]; then
+	echo "SKIP: Cannot add nft synproxy"
+	exit $ksft_skip
+fi
+
+if ! ip netns exec "$ns1" timeout 5 iperf3 -c 10.0.2.99 -n $((1 * 1024 * 1024)) > /dev/null; then
+	echo "FAIL: iperf3 returned an error" 1>&2
+	ret=1
+	ip netns exec "$nsr" nft list ruleset
+else
+	echo "PASS: synproxy connection successful"
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/net/netfilter/nft_zones_many.sh
index 5a8db0b48928..7db9982ba5a6 100755
--- a/tools/testing/selftests/netfilter/nft_zones_many.sh
+++ b/tools/testing/selftests/net/netfilter/nft_zones_many.sh
@@ -3,47 +3,34 @@
 # Test insertion speed for packets with identical addresses/ports
 # that are all placed in distinct conntrack zones.
 
-sfx=$(mktemp -u "XXXXXXXX")
-ns="ns-$sfx"
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
 
 zones=2000
+[ "$KSFT_MACHINE_SLOW" = yes ] && zones=500
+
 have_ct_tool=0
 ret=0
 
 cleanup()
 {
-	ip netns del $ns
-}
-
-checktool (){
-	if ! $1 > /dev/null 2>&1; then
-		echo "SKIP: Could not $2"
-		exit $ksft_skip
-	fi
+	cleanup_all_ns
 }
 
 checktool "nft --version" "run test without nft tool"
-checktool "ip -Version" "run test without ip tool"
 checktool "socat -V" "run test without socat tool"
-checktool "ip netns add $ns" "create net namespace"
+
+setup_ns ns1
 
 trap cleanup EXIT
 
-conntrack -V > /dev/null 2>&1
-if [ $? -eq 0 ];then
+if conntrack -V > /dev/null 2>&1; then
 	have_ct_tool=1
 fi
 
-ip -net "$ns" link set lo up
-
 test_zones() {
 	local max_zones=$1
 
-ip netns exec $ns sysctl -q net.netfilter.nf_conntrack_udp_timeout=3600
-ip netns exec $ns nft -f /dev/stdin<<EOF
+ip netns exec "$ns1" nft -f /dev/stdin<<EOF
 flush ruleset
 table inet raw {
 	map rndzone {
@@ -56,29 +43,39 @@ table inet raw {
 	}
 }
 EOF
+if [ "$?" -ne 0 ];then
+	echo "SKIP: Cannot add nftables rules"
+	exit $ksft_skip
+fi
+
+	ip netns exec "$ns1" sysctl -q net.netfilter.nf_conntrack_udp_timeout=3600
+
 	(
 		echo "add element inet raw rndzone {"
-	for i in $(seq 1 $max_zones);do
+	for i in $(seq 1 "$max_zones");do
 		echo -n "$i : $i"
-		if [ $i -lt $max_zones ]; then
+		if [ "$i" -lt "$max_zones" ]; then
 			echo ","
 		else
 			echo "}"
 		fi
 	done
-	) | ip netns exec $ns nft -f /dev/stdin
+	) | ip netns exec "$ns1" nft -f /dev/stdin
 
 	local i=0
 	local j=0
-	local outerstart=$(date +%s%3N)
-	local stop=$outerstart
-
-	while [ $i -lt $max_zones ]; do
-		local start=$(date +%s%3N)
+	local outerstart
+	local stop
+	outerstart=$(date +%s%3N)
+	stop=$outerstart
+
+	while [ "$i" -lt "$max_zones" ]; do
+		local start
+		start=$(date +%s%3N)
 		i=$((i + 1000))
 		j=$((j + 1))
 		# nft rule in output places each packet in a different zone.
-		dd if=/dev/zero of=/dev/stdout bs=8k count=1000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345
+		dd if=/dev/zero bs=8k count=1000 2>/dev/null | ip netns exec "$ns1" socat -u STDIN UDP:127.0.0.1:12345,sourceport=12345
 		if [ $? -ne 0 ] ;then
 			ret=1
 			break
@@ -89,14 +86,15 @@ EOF
 		echo "PASS: added 1000 entries in $duration ms (now $i total, loop $j)"
 	done
 
-	if [ $have_ct_tool -eq 1 ]; then
-		local count=$(ip netns exec "$ns" conntrack -C)
-		local duration=$((stop-outerstart))
+	if [ "$have_ct_tool" -eq 1 ]; then
+		local count duration
+		count=$(ip netns exec "$ns1" conntrack -C)
+		duration=$((stop-outerstart))
 
-		if [ $count -eq $max_zones ]; then
+		if [ "$count" -ge "$max_zones" ]; then
 			echo "PASS: inserted $count entries from packet path in $duration ms total"
 		else
-			ip netns exec $ns conntrack -S 1>&2
+			ip netns exec "$ns1" conntrack -S 1>&2
 			echo "FAIL: inserted $count entries from packet path in $duration ms total, expected $max_zones entries"
 			ret=1
 		fi
@@ -110,18 +108,19 @@ EOF
 test_conntrack_tool() {
 	local max_zones=$1
 
-	ip netns exec $ns conntrack -F >/dev/null 2>/dev/null
+	ip netns exec "$ns1" conntrack -F >/dev/null 2>/dev/null
 
-	local outerstart=$(date +%s%3N)
-	local start=$(date +%s%3N)
-	local stop=$start
-	local i=0
-	while [ $i -lt $max_zones ]; do
+	local outerstart start stop i
+	outerstart=$(date +%s%3N)
+	start=$(date +%s%3N)
+	stop="$start"
+	i=0
+	while [ "$i" -lt "$max_zones" ]; do
 		i=$((i + 1))
-		ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \
+		ip netns exec "$ns1" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \
 	                 --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i >/dev/null 2>&1
 		if [ $? -ne 0 ];then
-			ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \
+			ip netns exec "$ns1" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \
 	                 --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i > /dev/null
 			echo "FAIL: conntrack -I returned an error"
 			ret=1
@@ -137,13 +136,15 @@ test_conntrack_tool() {
 		fi
 	done
 
-	local count=$(ip netns exec "$ns" conntrack -C)
-	local duration=$((stop-outerstart))
+	local count
+	local duration
+	count=$(ip netns exec "$ns1" conntrack -C)
+	duration=$((stop-outerstart))
 
-	if [ $count -eq $max_zones ]; then
+	if [ "$count" -eq "$max_zones" ]; then
 		echo "PASS: inserted $count entries via ctnetlink in $duration ms"
 	else
-		ip netns exec $ns conntrack -S 1>&2
+		ip netns exec "$ns1" conntrack -S 1>&2
 		echo "FAIL: inserted $count entries via ctnetlink in $duration ms, expected $max_zones entries ($duration ms)"
 		ret=1
 	fi
@@ -151,7 +152,7 @@ test_conntrack_tool() {
 
 test_zones $zones
 
-if [ $have_ct_tool -eq 1 ];then
+if [ "$have_ct_tool" -eq 1 ];then
 	test_conntrack_tool $zones
 else
 	echo "SKIP: Could not run ctnetlink insertion test without conntrack tool"
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/common.sh b/tools/testing/selftests/net/netfilter/packetdrill/common.sh
new file mode 100755
index 000000000000..ed36d535196d
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/common.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# for debugging set net.netfilter.nf_log_all_netns=1 in init_net
+# or do not use net namespaces.
+modprobe -q nf_conntrack
+sysctl -q net.netfilter.nf_conntrack_log_invalid=6
+
+# Flush old cached data (fastopen cookies).
+ip tcp_metrics flush all > /dev/null 2>&1
+
+# TCP min, default, and max receive and send buffer sizes.
+sysctl -q net.ipv4.tcp_rmem="4096 540000 $((15*1024*1024))"
+sysctl -q net.ipv4.tcp_wmem="4096 $((256*1024)) 4194304"
+
+# TCP congestion control.
+sysctl -q net.ipv4.tcp_congestion_control=cubic
+
+# TCP slow start after idle.
+sysctl -q net.ipv4.tcp_slow_start_after_idle=0
+
+# TCP Explicit Congestion Notification (ECN)
+sysctl -q net.ipv4.tcp_ecn=0
+
+sysctl -q net.ipv4.tcp_notsent_lowat=4294967295 > /dev/null 2>&1
+
+# Override the default qdisc on the tun device.
+# Many tests fail with timing errors if the default
+# is FQ and that paces their flows.
+tc qdisc add dev tun0 root pfifo
+
+# Enable conntrack
+$xtables -A INPUT -m conntrack --ctstate NEW -p tcp --syn
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_ack_loss_stall.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_ack_loss_stall.pkt
new file mode 100644
index 000000000000..d755bd64c54f
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_ack_loss_stall.pkt
@@ -0,0 +1,118 @@
+// check that already-acked (retransmitted) packet is let through rather
+// than tagged as INVALID.
+
+`packetdrill/common.sh`
+
+// should set -P DROP but it disconnects VM w.o. extra netns
++0 `$xtables -A INPUT -m conntrack --ctstate INVALID -j DROP`
+
++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
++0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
++0 bind(3, ..., ...) = 0
++0 listen(3, 10) = 0
+
++0 < S 0:0(0) win 32792 <mss 1000>
++0 > S. 0:0(0) ack 1 <mss 1460>
++.01 < . 1:1(0) ack 1 win 65535
++0 accept(3, ..., ...) = 4
+
++0.0001 < P. 1:1461(1460) ack 1 win 257
++.0 > . 1:1(0) ack 1461 win 65535
++0.0001 < P. 1461:2921(1460) ack 1 win 257
++.0 > . 1:1(0) ack 2921 win 65535
++0.0001 < P. 2921:4381(1460) ack 1 win 257
++.0 > . 1:1(0) ack 4381 win 65535
++0.0001 < P. 4381:5841(1460) ack 1 win 257
++.0 > . 1:1(0) ack 5841 win 65535
++0.0001 < P. 5841:7301(1460) ack 1 win 257
++.0 > . 1:1(0) ack 7301 win 65535
++0.0001 < P. 7301:8761(1460) ack 1 win 257
++.0 > . 1:1(0) ack 8761 win 65535
++0.0001 < P. 8761:10221(1460) ack 1 win 257
++.0 > . 1:1(0) ack 10221 win 65535
++0.0001 < P. 10221:11681(1460) ack 1 win 257
++.0 > . 1:1(0) ack 11681 win 65535
++0.0001 < P. 11681:13141(1460) ack 1 win 257
++.0 > . 1:1(0) ack 13141 win 65535
++0.0001 < P. 13141:14601(1460) ack 1 win 257
++.0 > . 1:1(0) ack 14601 win 65535
++0.0001 < P. 14601:16061(1460) ack 1 win 257
++.0 > . 1:1(0) ack 16061 win 65535
++0.0001 < P. 16061:17521(1460) ack 1 win 257
++.0 > . 1:1(0) ack 17521 win 65535
++0.0001 < P. 17521:18981(1460) ack 1 win 257
++.0 > . 1:1(0) ack 18981 win 65535
++0.0001 < P. 18981:20441(1460) ack 1 win 257
++.0 > . 1:1(0) ack 20441 win 65535
++0.0001 < P. 20441:21901(1460) ack 1 win 257
++.0 > . 1:1(0) ack 21901 win 65535
++0.0001 < P. 21901:23361(1460) ack 1 win 257
++.0 > . 1:1(0) ack 23361 win 65535
++0.0001 < P. 23361:24821(1460) ack 1 win 257
+0.055 > . 1:1(0) ack 24821 win 65535
++0.0001 < P. 24821:26281(1460) ack 1 win 257
++.0 > . 1:1(0) ack 26281 win 65535
++0.0001 < P. 26281:27741(1460) ack 1 win 257
++.0 > . 1:1(0) ack 27741 win 65535
++0.0001 < P. 27741:29201(1460) ack 1 win 257
++.0 > . 1:1(0) ack 29201 win 65535
++0.0001 < P. 29201:30661(1460) ack 1 win 257
++.0 > . 1:1(0) ack 30661 win 65535
++0.0001 < P. 30661:32121(1460) ack 1 win 257
++.0 > . 1:1(0) ack 32121 win 65535
++0.0001 < P. 32121:33581(1460) ack 1 win 257
++.0 > . 1:1(0) ack 33581 win 65535
++0.0001 < P. 33581:35041(1460) ack 1 win 257
++.0 > . 1:1(0) ack 35041 win 65535
++0.0001 < P. 35041:36501(1460) ack 1 win 257
++.0 > . 1:1(0) ack 36501 win 65535
++0.0001 < P. 36501:37961(1460) ack 1 win 257
++.0 > . 1:1(0) ack 37961 win 65535
++0.0001 < P. 37961:39421(1460) ack 1 win 257
++.0 > . 1:1(0) ack 39421 win 65535
++0.0001 < P. 39421:40881(1460) ack 1 win 257
++.0 > . 1:1(0) ack 40881 win 65535
++0.0001 < P. 40881:42341(1460) ack 1 win 257
++.0 > . 1:1(0) ack 42341 win 65535
++0.0001 < P. 42341:43801(1460) ack 1 win 257
++.0 > . 1:1(0) ack 43801 win 65535
++0.0001 < P. 43801:45261(1460) ack 1 win 257
++.0 > . 1:1(0) ack 45261 win 65535
++0.0001 < P. 45261:46721(1460) ack 1 win 257
++.0 > . 1:1(0) ack 46721 win 65535
++0.0001 < P. 46721:48181(1460) ack 1 win 257
++.0 > . 1:1(0) ack 48181 win 65535
++0.0001 < P. 48181:49641(1460) ack 1 win 257
++.0 > . 1:1(0) ack 49641 win 65535
++0.0001 < P. 49641:51101(1460) ack 1 win 257
++.0 > . 1:1(0) ack 51101 win 65535
++0.0001 < P. 51101:52561(1460) ack 1 win 257
++.0 > . 1:1(0) ack 52561 win 65535
++0.0001 < P. 52561:54021(1460) ack 1 win 257
++.0 > . 1:1(0) ack 54021 win 65535
++0.0001 < P. 54021:55481(1460) ack 1 win 257
++.0 > . 1:1(0) ack 55481 win 65535
++0.0001 < P. 55481:56941(1460) ack 1 win 257
++.0 > . 1:1(0) ack 56941 win 65535
++0.0001 < P. 56941:58401(1460) ack 1 win 257
++.0 > . 1:1(0) ack 58401 win 65535
++0.0001 < P. 58401:59861(1460) ack 1 win 257
++.0 > . 1:1(0) ack 59861 win 65535
++0.0001 < P. 59861:61321(1460) ack 1 win 257
++.0 > . 1:1(0) ack 61321 win 65535
++0.0001 < P. 61321:62781(1460) ack 1 win 257
++.0 > . 1:1(0) ack 62781 win 65535
++0.0001 < P. 62781:64241(1460) ack 1 win 257
++.0 > . 1:1(0) ack 64241 win 65535
++0.0001 < P. 64241:65701(1460) ack 1 win 257
++.0 > . 1:1(0) ack 65701 win 65535
++0.0001 < P. 65701:67161(1460) ack 1 win 257
++.0 > . 1:1(0) ack 67161 win 65535
+
+// nf_ct_proto_6: SEQ is under the lower bound (already ACKed data retransmitted) IN=tun0 OUT= MAC= SRC=192.0.2.1 DST=192.168.24.72 LEN=1500 TOS=0x00 PREC=0x00 TTL=255 ID=0 PROTO=TCP SPT=34375 DPT=8080 SEQ=1 ACK=4162510439 WINDOW=257 RES=0x00 ACK PSH URGP=0
++0.0001 < P. 1:1461(1460) ack 1 win 257
+
+// only sent if above packet isn't flagged as invalid
++.0 > . 1:1(0) ack 67161 win 65535
+
++0 `$xtables -D INPUT -m conntrack --ctstate INVALID -j DROP`
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_inexact_rst.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_inexact_rst.pkt
new file mode 100644
index 000000000000..dccdd4c009c6
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_inexact_rst.pkt
@@ -0,0 +1,62 @@
+// check RST packet that doesn't exactly match expected next sequence
+// number still transitions conntrack state to CLOSE iff its already in
+// FIN/CLOSE_WAIT.
+
+`packetdrill/common.sh`
+
+//  5.771921 server_ip > client_ip TLSv1.2 337 [Packet size limited during capture]
+//  5.771994 server_ip > client_ip TLSv1.2 337 [Packet size limited during capture]
+//  5.772212 client_ip > server_ip TCP 66 45020 > 443 [ACK] Seq=1905874048 Ack=781810658 Win=36352 Len=0 TSval=3317842872 TSecr=675936334
+//  5.787924 server_ip > client_ip TLSv1.2 1300 [Packet size limited during capture]
+//  5.788126 server_ip > client_ip TLSv1.2 90 Application Data
+//  5.788207 server_ip > client_ip TCP 66 443 > 45020 [FIN, ACK] Seq=781811916 Ack=1905874048 Win=31104 Len=0 TSval=675936350 TSecr=3317842872
+//  5.788447 client_ip > server_ip TLSv1.2 90 Application Data
+//  5.788479 client_ip > server_ip TCP 66 45020 > 443 [RST, ACK] Seq=1905874072 Ack=781811917 Win=39040 Len=0 TSval=3317842889 TSecr=675936350
+//  5.788581 server_ip > client_ip TCP 54 8443 > 45020 [RST] Seq=781811892 Win=0 Len=0
+
++0 `iptables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
++0 `iptables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
+
++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+
+0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+
+0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8>
+
++0.1 < S. 1:1(0) ack 1 win 65535 <mss 1460>
+
++0 > . 1:1(0) ack 1 win 65535
++0 < . 1:1001(1000) ack 1 win 65535
++0 < . 1001:2001(1000) ack 1 win 65535
++0 < . 2001:3001(1000) ack 1 win 65535
+
++0 > . 1:1(0) ack 1001 win 65535
++0 > . 1:1(0) ack 2001 win 65535
++0 > . 1:1(0) ack 3001 win 65535
+
++0 write(3, ..., 1000) = 1000
+
++0.0 > P. 1:1001(1000) ack 3001 win 65535
+
++0.1 read(3, ..., 1000) = 1000
+
+// Conntrack should move to FIN_WAIT, then CLOSE_WAIT.
++0 < F. 3001:3001(0) ack 1001 win 65535
++0 >  . 1001:1001(0) ack 3002 win 65535
+
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q CLOSE_WAIT`
+
++1 close(3) = 0
+// RST: unread data. FIN was seen, hence ack + 1
++0 > R. 1001:1001(0) ack 3002 win 65535
+// ... and then, CLOSE.
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q CLOSE\ `
+
+// Spurious RST from peer -- no sk state.  Should NOT get
+// marked INVALID, because conntrack is already closing.
++0.1 < R 2001:2001(0) win 0
+
+// No packets should have been marked INVALID
++0 `iptables -v -S INPUT  | grep INVALID | grep -q -- "-c 0 0"`
++0 `iptables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"`
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_rst_invalid.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_rst_invalid.pkt
new file mode 100644
index 000000000000..686f18a3d9ef
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_rst_invalid.pkt
@@ -0,0 +1,59 @@
+// check that out of window resets are marked as INVALID and conntrack remains
+// in ESTABLISHED state.
+
+`packetdrill/common.sh`
+
++0 `$xtables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
++0 `$xtables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
+
++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+
+0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+
+0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8>
+
++0.1 < S. 1:1(0) ack 1 win 65535 <mss 1460>
+
++0 > . 1:1(0) ack 1 win 65535
++0 < . 1:1001(1000) ack 1 win 65535
++0 < . 1001:2001(1000) ack 1 win 65535
++0 < . 2001:3001(1000) ack 1 win 65535
+
++0 > . 1:1(0) ack 1001 win 65535
++0 > . 1:1(0) ack 2001 win 65535
++0 > . 1:1(0) ack 3001 win 65535
+
++0 write(3, ..., 1000) = 1000
+
+// out of window
++0.0 < R	0:0(0)	win 0
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED`
+
+// out of window
++0.0 < R	1000000:1000000(0)	win 0
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED`
+
+// in-window but not exact match
++0.0 < R	42:42(0)	win 0
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED`
+
++0.0 > P. 1:1001(1000) ack 3001 win 65535
+
++0.1 read(3, ..., 1000) = 1000
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED`
+
++0 < . 3001:3001(0) ack 1001 win 65535
+
++0.0 < R. 3000:3000(0) ack 1001 win 0
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q ESTABLISHED`
+
+// exact next sequence
++0.0 < R. 3001:3001(0) ack 1001 win 0
+// Conntrack should move to CLOSE
+
+// Expect four invalid RSTs
++0 `$xtables -v -S INPUT  | grep INVALID | grep -q -- "-c 4 "`
++0 `$xtables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"`
+
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null |grep -q CLOSE\ `
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_syn_challenge_ack.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_syn_challenge_ack.pkt
new file mode 100644
index 000000000000..3442cd29bc93
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_syn_challenge_ack.pkt
@@ -0,0 +1,44 @@
+// Check connection re-use, i.e. peer that receives the SYN answers with
+// a challenge-ACK.
+// Check that conntrack lets all packets pass, including the challenge ack,
+// and that a new connection is established.
+
+`packetdrill/common.sh`
+
+// S  >
+//  . < (challnge-ack)
+// R. >
+// S  >
+// S. <
+// Expected outcome: established connection.
+
++0 `$xtables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
++0 `$xtables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
+
++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+
+0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8>
+
+// Challenge ACK, old incarnation.
+0.1 < . 145824453:145824453(0) ack 643160523 win 240 <mss 1460,nop,nop,TS val 1 ecr 1,nop,wscale 0>
+
++0.01 > R 643160523:643160523(0) win 0
+
++0.01 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep UNREPLIED | grep -q SYN_SENT`
+
+// Must go through.
++0.01 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8>
+
+// correct synack
++0.1 < S. 0:0(0) ack 1 win 250 <mss 1460,nop,nop,TS val 1 ecr 1,nop,wscale 0>
+
+// 3whs completes.
++0.01 > . 1:1(0) ack 1 win 256 <nop,nop,TS val 1 ecr 1>
+
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep ESTABLISHED | grep -q ASSURED`
+
+// No packets should have been marked INVALID
++0 `$xtables -v -S INPUT  | grep INVALID | grep -q -- "-c 0 0"`
++0 `$xtables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"`
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_old.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_old.pkt
new file mode 100644
index 000000000000..3047160c4bf3
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_old.pkt
@@ -0,0 +1,51 @@
+// Check conntrack copes with syn/ack reply for a previous, old incarnation.
+
+// tcpdump with buggy sequence
+// 10.176.25.8.829 > 10.192.171.30.2049: Flags [S], seq 2375731741, win 29200, options [mss 1460,sackOK,TS val 2083107423 ecr 0,nop,wscale 7], length 0
+// OLD synack, for old/previous S
+// 10.192.171.30.2049 > 10.176.25.8.829: Flags [S.], seq 145824453, ack 643160523, win 65535, options [mss 8952,nop,wscale 5,TS val 3215437785 ecr 2082921663,nop,nop], length 0
+// This reset never makes it to the endpoint, elided in the packetdrill script
+// 10.192.171.30.2049 > 10.176.25.8.829: Flags [R.], seq 1, ack 1, win 65535, options [mss 8952,nop,wscale 5,TS val 3215443451 ecr 2082921663,nop,nop], length 0
+// Syn retransmit, no change
+// 10.176.25.8.829 > 10.192.171.30.2049: Flags [S], seq 2375731741, win 29200, options [mss 1460,sackOK,TS val 2083115583 ecr 0,nop,wscale 7], length 0
+// CORRECT synack, should be accepted, but conntrack classified this as INVALID:
+// SEQ is over the upper bound (over the window of the receiver) IN=tun0 OUT= MAC= SRC=192.0.2.1 DST=192.168.37.78 LEN=40 TOS=0x00 PREC=0x00 TTL=255 ID=0 PROTO=TCP SPT=8080 DPT=34500 SEQ=162602411 ACK=2124350315 ..
+// 10.192.171.30.2049 > 10.176.25.8.829: Flags [S.], seq 162602410, ack 2375731742, win 65535, options [mss 8952,nop,wscale 5,TS val 3215445754 ecr 2083115583,nop,nop], length 0
+
+`packetdrill/common.sh`
+
++0 `$xtables -A INPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
++0 `$xtables -A OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
+
++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
++0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+
+0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0.1 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1 ecr 0,nop,wscale 8>
+
+// bogus/outdated synack, invalid ack value
+0.1 < S. 145824453:145824453(0) ack 643160523 win 240 <mss 1440,nop,nop,TS val 1 ecr 1,nop,wscale 0>
+
+// syn retransmitted
+1.01 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1015 ecr 0,nop,wscale 8>
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep UNREPLIED | grep -q SYN_SENT`
+
+// correct synack
++0 < S. 145758918:145758918(0) ack 1 win 250 <mss 1460,nop,nop,TS val 1 ecr 1,nop,wscale 0>
++0 write(3, ..., 1) = 1
+
+// with buggy conntrack above packet is dropped, so SYN rtx is seen:
+// script packet:  1.054007 . 1:1(0) ack 16777958 win 256 <nop,nop,TS val 1033 ecr 1>
+// actual packet:  3.010000 S 0:0(0) win 65535 <mss 1460,sackOK,TS val 1015 ecr 0,nop,wscale 8>
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep ESTABLISHED | grep -q ASSURED`
+
++0 > P. 1:2(1) ack 4294901762 win 256 <nop,nop,TS val 1067 ecr 1>
+
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep ASSURED | grep -q ESTABLISHED`
+
+// No packets should have been marked INVALID in OUTPUT direction, 1 in INPUT
++0 `$xtables -v -S OUTPUT | grep INVALID | grep -q -- "-c 0 0"`
++0 `$xtables -v -S INPUT  | grep INVALID | grep -q -- "-c 1 "`
+
++0 `$xtables -D INPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
++0 `$xtables -D OUTPUT -p tcp -m conntrack --ctstate INVALID -j DROP`
diff --git a/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_reuse.pkt b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_reuse.pkt
new file mode 100644
index 000000000000..842242f8ccf7
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/packetdrill/conntrack_synack_reuse.pkt
@@ -0,0 +1,34 @@
+// Check reception of another SYN while we have an established conntrack state.
+// Challenge ACK is supposed to pass through, RST reply should clear conntrack
+// state and SYN retransmit should give us new 'SYN_RECV' connection state.
+
+`packetdrill/common.sh`
+
+// should show a match if bug is present:
++0 `iptables -A INPUT -m conntrack --ctstate INVALID -p tcp --tcp-flags SYN,ACK SYN,ACK`
+
++0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
++0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
++0 bind(3, ..., ...) = 0
++0 listen(3, 10) = 0
+
++0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7, TS val 1 ecr 0,nop,nop>
++0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,TS val 100 ecr 1,nop,wscale 8>
++.01 < . 1:1(0) ack 1 win 257 <TS val 1 ecr 100,nop,nop>
++0 accept(3, ..., ...) = 4
+
++0 < P. 1:101(100) ack 1 win 257 <TS val 2 ecr 100,nop,nop>
++.001 > . 1:1(0) ack 101 win 256 <nop,nop,TS val 110 ecr 2>
++0 read(4, ..., 101) = 100
+
+1.0 < S 2000:2000(0) win 32792 <mss 1000,nop,wscale 7, TS val 233 ecr 0,nop,nop>
+// Won't expect this: challenge ack.
+
++0 > . 1:1(0) ack 101 win 256 <nop,nop,TS val 112 ecr 2>
++0 < R. 101:101(0) ack 1 win 257
++0 close(4) = 0
+
+1.5 < S 2000:2000(0) win 32792 <mss 1000,nop,wscale 0, TS val 233 ecr 0,nop,nop>
+
++0 `conntrack -f $NFCT_IP_VERSION -L -p tcp --dport 8080 2>/dev/null | grep -q SYN_RECV`
++0 `iptables -v -S INPUT | grep INVALID | grep -q -- "-c 0 0"`
diff --git a/tools/testing/selftests/netfilter/rpath.sh b/tools/testing/selftests/net/netfilter/rpath.sh
index 5289c8447a41..4485fd7675ed 100755
--- a/tools/testing/selftests/netfilter/rpath.sh
+++ b/tools/testing/selftests/net/netfilter/rpath.sh
@@ -64,12 +64,18 @@ ip -net "$ns2" a a fec0:42::1/64 dev d0 nodad
 # firewall matches to test
 [ -n "$iptables" ] && {
 	common='-t raw -A PREROUTING -s 192.168.0.0/16'
-	ip netns exec "$ns2" "$iptables" $common -m rpfilter
+	if ! ip netns exec "$ns2" "$iptables" $common -m rpfilter;then
+		echo "Cannot add rpfilter rule"
+		exit $ksft_skip
+	fi
 	ip netns exec "$ns2" "$iptables" $common -m rpfilter --invert
 }
 [ -n "$ip6tables" ] && {
 	common='-t raw -A PREROUTING -s fec0::/16'
-	ip netns exec "$ns2" "$ip6tables" $common -m rpfilter
+	if ! ip netns exec "$ns2" "$ip6tables" $common -m rpfilter;then
+		echo "Cannot add rpfilter rule"
+		exit $ksft_skip
+	fi
 	ip netns exec "$ns2" "$ip6tables" $common -m rpfilter --invert
 }
 [ -n "$nft" ] && ip netns exec "$ns2" $nft -f - <<EOF
diff --git a/tools/testing/selftests/netfilter/sctp_collision.c b/tools/testing/selftests/net/netfilter/sctp_collision.c
index 21bb1cfd8a85..21bb1cfd8a85 100644
--- a/tools/testing/selftests/netfilter/sctp_collision.c
+++ b/tools/testing/selftests/net/netfilter/sctp_collision.c
diff --git a/tools/testing/selftests/net/netfilter/settings b/tools/testing/selftests/net/netfilter/settings
new file mode 100644
index 000000000000..abc5648b59ab
--- /dev/null
+++ b/tools/testing/selftests/net/netfilter/settings
@@ -0,0 +1 @@
+timeout=1800
diff --git a/tools/testing/selftests/netfilter/xt_string.sh b/tools/testing/selftests/net/netfilter/xt_string.sh
index 1802653a4728..8d401c69e317 100755
--- a/tools/testing/selftests/netfilter/xt_string.sh
+++ b/tools/testing/selftests/net/netfilter/xt_string.sh
@@ -5,53 +5,57 @@
 ksft_skip=4
 rc=0
 
-if ! iptables --version >/dev/null 2>&1; then
-	echo "SKIP: Test needs iptables"
-	exit $ksft_skip
-fi
-if ! ip -V >/dev/null 2>&1; then
-	echo "SKIP: Test needs iproute2"
-	exit $ksft_skip
-fi
-if ! nc -h >/dev/null 2>&1; then
-	echo "SKIP: Test needs netcat"
-	exit $ksft_skip
-fi
+source lib.sh
+
+checktool "socat -h" "run test without socat"
+checktool "iptables --version" "test needs iptables"
+
+infile=$(mktemp)
+
+cleanup()
+{
+	ip netns del "$netns"
+	rm -f "$infile"
+}
+
+trap cleanup EXIT
+
+setup_ns netns
+
+ip -net "$netns" link add d0 type dummy
+ip -net "$netns" link set d0 up
+ip -net "$netns" addr add 10.1.2.1/24 dev d0
 
 pattern="foo bar baz"
 patlen=11
 hdrlen=$((20 + 8)) # IPv4 + UDP
-ns="ns-$(mktemp -u XXXXXXXX)"
-trap 'ip netns del $ns' EXIT
-ip netns add "$ns"
-ip -net "$ns" link add d0 type dummy
-ip -net "$ns" link set d0 up
-ip -net "$ns" addr add 10.1.2.1/24 dev d0
-
-#ip netns exec "$ns" tcpdump -npXi d0 &
+
+#ip netns exec "$netns" tcpdump -npXi d0 &
 #tcpdump_pid=$!
-#trap 'kill $tcpdump_pid; ip netns del $ns' EXIT
+#trap 'kill $tcpdump_pid; ip netns del $netns' EXIT
 
 add_rule() { # (alg, from, to)
-	ip netns exec "$ns" \
+	ip netns exec "$netns" \
 		iptables -A OUTPUT -o d0 -m string \
-			--string "$pattern" --algo $1 --from $2 --to $3
+			--string "$pattern" --algo "$1" --from "$2" --to "$3"
 }
 showrules() { # ()
-	ip netns exec "$ns" iptables -v -S OUTPUT | grep '^-A'
+	ip netns exec "$netns" iptables -v -S OUTPUT | grep '^-A'
 }
 zerorules() {
-	ip netns exec "$ns" iptables -Z OUTPUT
+	ip netns exec "$netns" iptables -Z OUTPUT
 }
 countrule() { # (pattern)
 	showrules | grep -c -- "$*"
 }
 send() { # (offset)
-	( for ((i = 0; i < $1 - $hdrlen; i++)); do
-		printf " "
+	( for ((i = 0; i < $1 - hdrlen; i++)); do
+		echo -n " "
 	  done
-	  printf "$pattern"
-	) | ip netns exec "$ns" nc -w 1 -u 10.1.2.2 27374
+	  echo -n "$pattern"
+	) > "$infile"
+
+	ip netns exec "$netns" socat -t 1 -u STDIN UDP-SENDTO:10.1.2.2:27374 < "$infile"
 }
 
 add_rule bm 1000 1500
@@ -61,8 +65,8 @@ add_rule kmp 1400 1600
 
 zerorules
 send 0
-send $((1000 - $patlen))
-if [ $(countrule -c 0 0) -ne 4 ]; then
+send $((1000 - patlen))
+if [ "$(countrule -c 0 0)" -ne 4 ]; then
 	echo "FAIL: rules match data before --from"
 	showrules
 	((rc--))
@@ -70,16 +74,16 @@ fi
 
 zerorules
 send 1000
-send $((1400 - $patlen))
-if [ $(countrule -c 2) -ne 2 ]; then
+send $((1400 - patlen))
+if [ "$(countrule -c 2)" -ne 2 ]; then
 	echo "FAIL: only two rules should match at low offset"
 	showrules
 	((rc--))
 fi
 
 zerorules
-send $((1500 - $patlen))
-if [ $(countrule -c 1) -ne 4 ]; then
+send $((1500 - patlen))
+if [ "$(countrule -c 1)" -ne 4 ]; then
 	echo "FAIL: all rules should match at end of packet"
 	showrules
 	((rc--))
@@ -87,7 +91,7 @@ fi
 
 zerorules
 send 1495
-if [ $(countrule -c 1) -ne 1 ]; then
+if [ "$(countrule -c 1)" -ne 1 ]; then
 	echo "FAIL: only kmp with proper --to should match pattern spanning fragments"
 	showrules
 	((rc--))
@@ -95,23 +99,23 @@ fi
 
 zerorules
 send 1500
-if [ $(countrule -c 1) -ne 2 ]; then
+if [ "$(countrule -c 1)" -ne 2 ]; then
 	echo "FAIL: two rules should match pattern at start of second fragment"
 	showrules
 	((rc--))
 fi
 
 zerorules
-send $((1600 - $patlen))
-if [ $(countrule -c 1) -ne 2 ]; then
+send $((1600 - patlen))
+if [ "$(countrule -c 1)" -ne 2 ]; then
 	echo "FAIL: two rules should match pattern at end of largest --to"
 	showrules
 	((rc--))
 fi
 
 zerorules
-send $((1600 - $patlen + 1))
-if [ $(countrule -c 1) -ne 0 ]; then
+send $((1600 - patlen + 1))
+if [ "$(countrule -c 1)" -ne 0 ]; then
 	echo "FAIL: no rules should match pattern extending largest --to"
 	showrules
 	((rc--))
@@ -119,10 +123,11 @@ fi
 
 zerorules
 send 1600
-if [ $(countrule -c 1) -ne 0 ]; then
+if [ "$(countrule -c 1)" -ne 0 ]; then
 	echo "FAIL: no rule should match pattern past largest --to"
 	showrules
 	((rc--))
 fi
 
+[ $rc -eq 0 ] && echo "PASS: string match tests"
 exit $rc
diff --git a/tools/testing/selftests/net/nl_netdev.py b/tools/testing/selftests/net/nl_netdev.py
new file mode 100755
index 000000000000..93d9d914529b
--- /dev/null
+++ b/tools/testing/selftests/net/nl_netdev.py
@@ -0,0 +1,98 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+import time
+from lib.py import ksft_run, ksft_exit, ksft_pr
+from lib.py import ksft_eq, ksft_ge, ksft_busy_wait
+from lib.py import NetdevFamily, NetdevSimDev, ip
+
+
+def empty_check(nf) -> None:
+    devs = nf.dev_get({}, dump=True)
+    ksft_ge(len(devs), 1)
+
+
+def lo_check(nf) -> None:
+    lo_info = nf.dev_get({"ifindex": 1})
+    ksft_eq(len(lo_info['xdp-features']), 0)
+    ksft_eq(len(lo_info['xdp-rx-metadata-features']), 0)
+
+
+def page_pool_check(nf) -> None:
+    with NetdevSimDev() as nsimdev:
+        nsim = nsimdev.nsims[0]
+
+        def up():
+            ip(f"link set dev {nsim.ifname} up")
+
+        def down():
+            ip(f"link set dev {nsim.ifname} down")
+
+        def get_pp():
+            pp_list = nf.page_pool_get({}, dump=True)
+            return [pp for pp in pp_list if pp.get("ifindex") == nsim.ifindex]
+
+        # No page pools when down
+        down()
+        ksft_eq(len(get_pp()), 0)
+
+        # Up, empty page pool appears
+        up()
+        pp_list = get_pp()
+        ksft_ge(len(pp_list), 0)
+        refs = sum([pp["inflight"] for pp in pp_list])
+        ksft_eq(refs, 0)
+
+        # Down, it disappears, again
+        down()
+        pp_list = get_pp()
+        ksft_eq(len(pp_list), 0)
+
+        # Up, allocate a page
+        up()
+        nsim.dfs_write("pp_hold", "y")
+        pp_list = nf.page_pool_get({}, dump=True)
+        refs = sum([pp["inflight"] for pp in pp_list if pp.get("ifindex") == nsim.ifindex])
+        ksft_ge(refs, 1)
+
+        # Now let's leak a page
+        down()
+        pp_list = get_pp()
+        ksft_eq(len(pp_list), 1)
+        refs = sum([pp["inflight"] for pp in pp_list])
+        ksft_eq(refs, 1)
+        attached = [pp for pp in pp_list if "detach-time" not in pp]
+        ksft_eq(len(attached), 0)
+
+        # New pp can get created, and we'll have two
+        up()
+        pp_list = get_pp()
+        attached = [pp for pp in pp_list if "detach-time" not in pp]
+        detached = [pp for pp in pp_list if "detach-time" in pp]
+        ksft_eq(len(attached), 1)
+        ksft_eq(len(detached), 1)
+
+        # Free the old page and the old pp is gone
+        nsim.dfs_write("pp_hold", "n")
+        # Freeing check is once a second so we may need to retry
+        ksft_busy_wait(lambda: len(get_pp()) == 1, deadline=2)
+
+        # And down...
+        down()
+        ksft_eq(len(get_pp()), 0)
+
+        # Last, leave the page hanging for destroy, nothing to check
+        # we're trying to exercise the orphaning path in the kernel
+        up()
+        nsim.dfs_write("pp_hold", "y")
+
+
+def main() -> None:
+    nf = NetdevFamily()
+    ksft_run([empty_check, lo_check, page_pool_check],
+             args=(nf, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
index 5e0e539a323d..1dd057afd3fb 100644
--- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
+++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
@@ -489,7 +489,7 @@ class ovsactions(nla):
                     actstr, reason = parse_extract_field(
                         actstr,
                         "drop(",
-                        "([0-9]+)",
+                        r"([0-9]+)",
                         lambda x: int(x, 0),
                         False,
                         None,
@@ -502,9 +502,9 @@ class ovsactions(nla):
                     actstr = actstr[len("drop"): ]
                     return (totallen - len(actstr))
 
-            elif parse_starts_block(actstr, "^(\d+)", False, True):
+            elif parse_starts_block(actstr, r"^(\d+)", False, True):
                 actstr, output = parse_extract_field(
-                    actstr, None, "(\d+)", lambda x: int(x), False, "0"
+                    actstr, None, r"(\d+)", lambda x: int(x), False, "0"
                 )
                 self["attrs"].append(["OVS_ACTION_ATTR_OUTPUT", output])
                 parsed = True
@@ -512,7 +512,7 @@ class ovsactions(nla):
                 actstr, recircid = parse_extract_field(
                     actstr,
                     "recirc(",
-                    "([0-9a-fA-Fx]+)",
+                    r"([0-9a-fA-Fx]+)",
                     lambda x: int(x, 0),
                     False,
                     0,
@@ -588,17 +588,17 @@ class ovsactions(nla):
                                 actstr = actstr[3:]
 
                             actstr, ip_block_min = parse_extract_field(
-                                actstr, "=", "([0-9a-fA-F\.]+)", str, False
+                                actstr, "=", r"([0-9a-fA-F\.]+)", str, False
                             )
                             actstr, ip_block_max = parse_extract_field(
-                                actstr, "-", "([0-9a-fA-F\.]+)", str, False
+                                actstr, "-", r"([0-9a-fA-F\.]+)", str, False
                             )
 
                             actstr, proto_min = parse_extract_field(
-                                actstr, ":", "(\d+)", int, False
+                                actstr, ":", r"(\d+)", int, False
                             )
                             actstr, proto_max = parse_extract_field(
-                                actstr, "-", "(\d+)", int, False
+                                actstr, "-", r"(\d+)", int, False
                             )
 
                             if t is not None:
diff --git a/tools/testing/selftests/bpf/progs/sample_map_ret0.c b/tools/testing/selftests/net/sample_map_ret0.bpf.c
index 495990d355ef..43ca92594926 100644
--- a/tools/testing/selftests/bpf/progs/sample_map_ret0.c
+++ b/tools/testing/selftests/net/sample_map_ret0.bpf.c
@@ -17,7 +17,7 @@ struct {
 } array SEC(".maps");
 
 /* Sample program which should always load for testing control paths. */
-SEC(".text") int func()
+SEC("xdp") int func()
 {
 	__u64 key64 = 0;
 	__u32 key = 0;
diff --git a/tools/testing/selftests/bpf/progs/sample_ret0.c b/tools/testing/selftests/net/sample_ret0.bpf.c
index fec99750d6ea..1df5ca98bb65 100644
--- a/tools/testing/selftests/bpf/progs/sample_ret0.c
+++ b/tools/testing/selftests/net/sample_ret0.bpf.c
@@ -1,6 +1,9 @@
 /* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
 
+#define SEC(name) __attribute__((section(name), used))
+
 /* Sample program which should always load for testing control paths. */
+SEC("xdp")
 int func()
 {
 	return 0;
diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh
index 8802604148dd..11a1ebda564f 100755
--- a/tools/testing/selftests/net/udpgro.sh
+++ b/tools/testing/selftests/net/udpgro.sh
@@ -7,7 +7,7 @@ source net_helper.sh
 
 readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
 
-BPF_FILE="xdp_dummy.o"
+BPF_FILE="xdp_dummy.bpf.o"
 
 # set global exit status, but never reset nonzero one.
 check_err()
diff --git a/tools/testing/selftests/net/udpgro_bench.sh b/tools/testing/selftests/net/udpgro_bench.sh
index 7080eae5312b..c51ea90a1395 100755
--- a/tools/testing/selftests/net/udpgro_bench.sh
+++ b/tools/testing/selftests/net/udpgro_bench.sh
@@ -7,7 +7,7 @@ source net_helper.sh
 
 readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
 
-BPF_FILE="xdp_dummy.o"
+BPF_FILE="xdp_dummy.bpf.o"
 
 cleanup() {
 	local -r jobs="$(jobs -p)"
diff --git a/tools/testing/selftests/net/udpgro_frglist.sh b/tools/testing/selftests/net/udpgro_frglist.sh
index e1ff645bd3d1..17404f49cdb6 100755
--- a/tools/testing/selftests/net/udpgro_frglist.sh
+++ b/tools/testing/selftests/net/udpgro_frglist.sh
@@ -7,7 +7,7 @@ source net_helper.sh
 
 readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
 
-BPF_FILE="xdp_dummy.o"
+BPF_FILE="xdp_dummy.bpf.o"
 
 cleanup() {
 	local -r jobs="$(jobs -p)"
@@ -42,8 +42,8 @@ run_one() {
 
 	ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp
 	tc -n "${PEER_NS}" qdisc add dev veth1 clsact
-	tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file nat6to4.o section schedcls/ingress6/nat_6  direct-action
-	tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file nat6to4.o section schedcls/egress4/snat4 direct-action
+	tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file nat6to4.bpf.o section schedcls/ingress6/nat_6  direct-action
+	tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file nat6to4.bpf.o section schedcls/egress4/snat4 direct-action
         echo ${rx_args}
 	ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -r &
 
@@ -89,7 +89,7 @@ if [ ! -f ${BPF_FILE} ]; then
 	exit -1
 fi
 
-if [ ! -f nat6to4.o ]; then
+if [ ! -f nat6to4.bpf.o ]; then
 	echo "Missing nat6to4 helper. Run 'make' first"
 	exit -1
 fi
diff --git a/tools/testing/selftests/net/udpgro_fwd.sh b/tools/testing/selftests/net/udpgro_fwd.sh
index 83ed987cff34..550d8eb3e224 100755
--- a/tools/testing/selftests/net/udpgro_fwd.sh
+++ b/tools/testing/selftests/net/udpgro_fwd.sh
@@ -3,7 +3,7 @@
 
 source net_helper.sh
 
-BPF_FILE="xdp_dummy.o"
+BPF_FILE="xdp_dummy.bpf.o"
 readonly BASE="ns-$(mktemp -u XXXXXX)"
 readonly SRC=2
 readonly DST=1
diff --git a/tools/testing/selftests/net/veth.sh b/tools/testing/selftests/net/veth.sh
index 3a394b43e274..4f1edbafb946 100755
--- a/tools/testing/selftests/net/veth.sh
+++ b/tools/testing/selftests/net/veth.sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
-BPF_FILE="xdp_dummy.o"
+BPF_FILE="xdp_dummy.bpf.o"
 readonly STATS="$(mktemp -p /tmp ns-XXXXXX)"
 readonly BASE=`basename $STATS`
 readonly SRC=2
diff --git a/tools/testing/selftests/net/xdp_dummy.c b/tools/testing/selftests/net/xdp_dummy.bpf.c
index d988b2e0cee8..d988b2e0cee8 100644
--- a/tools/testing/selftests/net/xdp_dummy.c
+++ b/tools/testing/selftests/net/xdp_dummy.bpf.c
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
deleted file mode 100644
index 936c3085bb83..000000000000
--- a/tools/testing/selftests/netfilter/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for netfilter selftests
-
-TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
-	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \
-	nft_concat_range.sh nft_conntrack_helper.sh \
-	nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
-	ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \
-	conntrack_vrf.sh nft_synproxy.sh rpath.sh nft_audit.sh \
-	conntrack_sctp_collision.sh xt_string.sh \
-	bridge_netfilter.sh
-
-HOSTPKG_CONFIG := pkg-config
-
-CFLAGS += $(shell $(HOSTPKG_CONFIG) --cflags libmnl 2>/dev/null)
-LDLIBS += $(shell $(HOSTPKG_CONFIG) --libs libmnl 2>/dev/null || echo -lmnl)
-
-TEST_GEN_FILES =  nf-queue connect_close audit_logread sctp_collision \
-	conntrack_dump_flush
-
-include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/bridge_brouter.sh b/tools/testing/selftests/netfilter/bridge_brouter.sh
deleted file mode 100755
index 29f3955b9af7..000000000000
--- a/tools/testing/selftests/netfilter/bridge_brouter.sh
+++ /dev/null
@@ -1,146 +0,0 @@
-#!/bin/bash
-#
-# This test is for bridge 'brouting', i.e. make some packets being routed
-# rather than getting bridged even though they arrive on interface that is
-# part of a bridge.
-
-#           eth0    br0     eth0
-# setup is: ns1 <-> ns0 <-> ns2
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-ebtables -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ebtables"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-ip netns add ns0
-ip netns add ns1
-ip netns add ns2
-
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
-if [ $? -ne 0 ]; then
-	echo "SKIP: Can't create veth device"
-	exit $ksft_skip
-fi
-ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
-
-ip -net ns0 link set lo up
-ip -net ns0 link set veth0 up
-ip -net ns0 link set veth1 up
-
-ip -net ns0 link add br0 type bridge
-if [ $? -ne 0 ]; then
-	echo "SKIP: Can't create bridge br0"
-	exit $ksft_skip
-fi
-
-ip -net ns0 link set veth0 master br0
-ip -net ns0 link set veth1 master br0
-ip -net ns0 link set br0 up
-ip -net ns0 addr add 10.0.0.1/24 dev br0
-
-# place both in same subnet, ns1 and ns2 connected via ns0:br0
-for i in 1 2; do
-  ip -net ns$i link set lo up
-  ip -net ns$i link set eth0 up
-  ip -net ns$i addr add 10.0.0.1$i/24 dev eth0
-done
-
-test_ebtables_broute()
-{
-	local cipt
-
-	# redirect is needed so the dstmac is rewritten to the bridge itself,
-	# ip stack won't process OTHERHOST (foreign unicast mac) packets.
-	ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP
-	if [ $? -ne 0 ]; then
-		echo "SKIP: Could not add ebtables broute redirect rule"
-		return $ksft_skip
-	fi
-
-	# ping netns1, expected to not work (ip forwarding is off)
-	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1
-	if [ $? -eq 0 ]; then
-		echo "ERROR: ping works, should have failed" 1>&2
-		return 1
-	fi
-
-	# enable forwarding on both interfaces.
-	# neither needs an ip address, but at least the bridge needs
-	# an ip address in same network segment as ns1 and ns2 (ns0
-	# needs to be able to determine route for to-be-forwarded packet).
-	ip netns exec ns0 sysctl -q net.ipv4.conf.veth0.forwarding=1
-	ip netns exec ns0 sysctl -q net.ipv4.conf.veth1.forwarding=1
-
-	sleep 1
-
-	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null
-	if [ $? -ne 0 ]; then
-		echo "ERROR: ping did not work, but it should (broute+forward)" 1>&2
-		return 1
-	fi
-
-	echo "PASS: ns1/ns2 connectivity with active broute rule"
-	ip netns exec ns0 ebtables -t broute -F
-
-	# ping netns1, expected to work (frames are bridged)
-	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null
-	if [ $? -ne 0 ]; then
-		echo "ERROR: ping did not work, but it should (bridged)" 1>&2
-		return 1
-	fi
-
-	ip netns exec ns0 ebtables -t filter -A FORWARD -p ipv4 --ip-protocol icmp -j DROP
-
-	# ping netns1, expected to not work (DROP in bridge forward)
-	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1
-	if [ $? -eq 0 ]; then
-		echo "ERROR: ping works, should have failed (icmp forward drop)" 1>&2
-		return 1
-	fi
-
-	# re-activate brouter
-	ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP
-
-	ip netns exec ns2 ping -q -c 1 10.0.0.11 > /dev/null
-	if [ $? -ne 0 ]; then
-		echo "ERROR: ping did not work, but it should (broute+forward 2)" 1>&2
-		return 1
-	fi
-
-	echo "PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop"
-	return 0
-}
-
-# test basic connectivity
-ip netns exec ns1 ping -c 1 -q 10.0.0.12 > /dev/null
-if [ $? -ne 0 ]; then
-    echo "ERROR: Could not reach ns2 from ns1" 1>&2
-    ret=1
-fi
-
-ip netns exec ns2 ping -c 1 -q 10.0.0.11 > /dev/null
-if [ $? -ne 0 ]; then
-    echo "ERROR: Could not reach ns1 from ns2" 1>&2
-    ret=1
-fi
-
-if [ $ret -eq 0 ];then
-    echo "PASS: netns connectivity: ns1 and ns2 can reach each other"
-fi
-
-test_ebtables_broute
-ret=$?
-for i in 0 1 2; do ip netns del ns$i;done
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/bridge_netfilter.sh b/tools/testing/selftests/netfilter/bridge_netfilter.sh
deleted file mode 100644
index 659b3ab02c8b..000000000000
--- a/tools/testing/selftests/netfilter/bridge_netfilter.sh
+++ /dev/null
@@ -1,188 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Test bridge netfilter + conntrack, a combination that doesn't really work,
-# with multicast/broadcast packets racing for hash table insertion.
-
-#           eth0    br0     eth0
-# setup is: ns1 <->,ns0 <-> ns3
-#           ns2 <-'    `'-> ns4
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-sfx=$(mktemp -u "XXXXXXXX")
-ns0="ns0-$sfx"
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-ns3="ns3-$sfx"
-ns4="ns4-$sfx"
-
-ebtables -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ebtables"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-for i in $(seq 0 4); do
-  eval ip netns add \$ns$i
-done
-
-cleanup() {
-  for i in $(seq 0 4); do eval ip netns del \$ns$i;done
-}
-
-trap cleanup EXIT
-
-do_ping()
-{
-	fromns="$1"
-	dstip="$2"
-
-	ip netns exec $fromns ping -c 1 -q $dstip > /dev/null
-	if [ $? -ne 0 ]; then
-		echo "ERROR: ping from $fromns to $dstip"
-		ip netns exec ${ns0} nft list ruleset
-		ret=1
-	fi
-}
-
-bcast_ping()
-{
-	fromns="$1"
-	dstip="$2"
-
-	for i in $(seq 1 1000); do
-		ip netns exec $fromns ping -q -f -b -c 1 -q $dstip > /dev/null 2>&1
-		if [ $? -ne 0 ]; then
-			echo "ERROR: ping -b from $fromns to $dstip"
-			ip netns exec ${ns0} nft list ruleset
-			fi
-	done
-}
-
-ip link add veth1 netns ${ns0} type veth peer name eth0 netns ${ns1}
-if [ $? -ne 0 ]; then
-	echo "SKIP: Can't create veth device"
-	exit $ksft_skip
-fi
-
-ip link add veth2 netns ${ns0} type veth peer name eth0 netns $ns2
-ip link add veth3 netns ${ns0} type veth peer name eth0 netns $ns3
-ip link add veth4 netns ${ns0} type veth peer name eth0 netns $ns4
-
-ip -net ${ns0} link set lo up
-
-for i in $(seq 1 4); do
-  ip -net ${ns0} link set veth$i up
-done
-
-ip -net ${ns0} link add br0 type bridge stp_state 0 forward_delay 0 nf_call_iptables 1 nf_call_ip6tables 1 nf_call_arptables 1
-if [ $? -ne 0 ]; then
-	echo "SKIP: Can't create bridge br0"
-	exit $ksft_skip
-fi
-
-# make veth0,1,2 part of bridge.
-for i in $(seq 1 3); do
-  ip -net ${ns0} link set veth$i master br0
-done
-
-# add a macvlan on top of the bridge.
-MACVLAN_ADDR=ba:f3:13:37:42:23
-ip -net ${ns0} link add link br0 name macvlan0 type macvlan mode private
-ip -net ${ns0} link set macvlan0 address ${MACVLAN_ADDR}
-ip -net ${ns0} link set macvlan0 up
-ip -net ${ns0} addr add 10.23.0.1/24 dev macvlan0
-
-# add a macvlan on top of veth4.
-MACVLAN_ADDR=ba:f3:13:37:42:24
-ip -net ${ns0} link add link veth4 name macvlan4 type macvlan mode vepa
-ip -net ${ns0} link set macvlan4 address ${MACVLAN_ADDR}
-ip -net ${ns0} link set macvlan4 up
-
-# make the macvlan part of the bridge.
-# veth4 is not a bridge port, only the macvlan on top of it.
-ip -net ${ns0} link set macvlan4 master br0
-
-ip -net ${ns0} link set br0 up
-ip -net ${ns0} addr add 10.0.0.1/24 dev br0
-ip netns exec ${ns0} sysctl -q net.bridge.bridge-nf-call-iptables=1
-ret=$?
-if [ $ret -ne 0 ] ; then
-	echo "SKIP: bridge netfilter not available"
-	ret=$ksft_skip
-fi
-
-# for testing, so namespaces will reply to ping -b probes.
-ip netns exec ${ns0} sysctl -q net.ipv4.icmp_echo_ignore_broadcasts=0
-
-# enable conntrack in ns0 and drop broadcast packets in forward to
-# avoid them from getting confirmed in the postrouting hook before
-# the cloned skb is passed up the stack.
-ip netns exec ${ns0} nft -f - <<EOF
-table ip filter {
-	chain input {
-		type filter hook input priority 1; policy accept
-		iifname br0 counter
-		ct state new accept
-	}
-}
-
-table bridge filter {
-	chain forward {
-		type filter hook forward priority 0; policy accept
-		meta pkttype broadcast ip protocol icmp counter drop
-	}
-}
-EOF
-
-# place 1, 2 & 3 in same subnet, connected via ns0:br0.
-# ns4 is placed in same subnet as well, but its not
-# part of the bridge: the corresponding veth4 is not
-# part of the bridge, only its macvlan interface.
-for i in $(seq 1 4); do
-  eval ip -net \$ns$i link set lo up
-  eval ip -net \$ns$i link set eth0 up
-done
-for i in $(seq 1 2); do
-  eval ip -net \$ns$i addr add 10.0.0.1$i/24 dev eth0
-done
-
-ip -net ${ns3} addr add 10.23.0.13/24 dev eth0
-ip -net ${ns4} addr add 10.23.0.14/24 dev eth0
-
-# test basic connectivity
-do_ping ${ns1} 10.0.0.12
-do_ping ${ns3} 10.23.0.1
-do_ping ${ns4} 10.23.0.1
-
-if [ $ret -eq 0 ];then
-	echo "PASS: netns connectivity: ns1 can reach ns2, ns3 and ns4 can reach ns0"
-fi
-
-bcast_ping ${ns1} 10.0.0.255
-
-# This should deliver broadcast to macvlan0, which is on top of ns0:br0.
-bcast_ping ${ns3} 10.23.0.255
-
-# same, this time via veth4:macvlan4.
-bcast_ping ${ns4} 10.23.0.255
-
-read t < /proc/sys/kernel/tainted
-
-if [ $t -eq 0 ];then
-	echo PASS: kernel not tainted
-else
-	echo ERROR: kernel is tainted
-	ret=1
-fi
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
deleted file mode 100644
index 7c42b1b2c69b..000000000000
--- a/tools/testing/selftests/netfilter/config
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_NET_NS=y
-CONFIG_NF_TABLES_INET=y
-CONFIG_NFT_QUEUE=m
-CONFIG_NFT_NAT=m
-CONFIG_NFT_REDIR=m
-CONFIG_NFT_MASQ=m
-CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_AUDIT=y
diff --git a/tools/testing/selftests/netfilter/conntrack_sctp_collision.sh b/tools/testing/selftests/netfilter/conntrack_sctp_collision.sh
deleted file mode 100755
index a924e595cfd8..000000000000
--- a/tools/testing/selftests/netfilter/conntrack_sctp_collision.sh
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Testing For SCTP COLLISION SCENARIO as Below:
-#
-#   14:35:47.655279 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [INIT] [init tag: 2017837359]
-#   14:35:48.353250 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [INIT] [init tag: 1187206187]
-#   14:35:48.353275 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [INIT ACK] [init tag: 2017837359]
-#   14:35:48.353283 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [COOKIE ECHO]
-#   14:35:48.353977 IP CLIENT_IP.PORT > SERVER_IP.PORT: sctp (1) [COOKIE ACK]
-#   14:35:48.855335 IP SERVER_IP.PORT > CLIENT_IP.PORT: sctp (1) [INIT ACK] [init tag: 164579970]
-#
-# TOPO: SERVER_NS (link0)<--->(link1) ROUTER_NS (link2)<--->(link3) CLIENT_NS
-
-CLIENT_NS=$(mktemp -u client-XXXXXXXX)
-CLIENT_IP="198.51.200.1"
-CLIENT_PORT=1234
-
-SERVER_NS=$(mktemp -u server-XXXXXXXX)
-SERVER_IP="198.51.100.1"
-SERVER_PORT=1234
-
-ROUTER_NS=$(mktemp -u router-XXXXXXXX)
-CLIENT_GW="198.51.200.2"
-SERVER_GW="198.51.100.2"
-
-# setup the topo
-setup() {
-	ip net add $CLIENT_NS
-	ip net add $SERVER_NS
-	ip net add $ROUTER_NS
-	ip -n $SERVER_NS link add link0 type veth peer name link1 netns $ROUTER_NS
-	ip -n $CLIENT_NS link add link3 type veth peer name link2 netns $ROUTER_NS
-
-	ip -n $SERVER_NS link set link0 up
-	ip -n $SERVER_NS addr add $SERVER_IP/24 dev link0
-	ip -n $SERVER_NS route add $CLIENT_IP dev link0 via $SERVER_GW
-
-	ip -n $ROUTER_NS link set link1 up
-	ip -n $ROUTER_NS link set link2 up
-	ip -n $ROUTER_NS addr add $SERVER_GW/24 dev link1
-	ip -n $ROUTER_NS addr add $CLIENT_GW/24 dev link2
-	ip net exec $ROUTER_NS sysctl -wq net.ipv4.ip_forward=1
-
-	ip -n $CLIENT_NS link set link3 up
-	ip -n $CLIENT_NS addr add $CLIENT_IP/24 dev link3
-	ip -n $CLIENT_NS route add $SERVER_IP dev link3 via $CLIENT_GW
-
-	# simulate the delay on OVS upcall by setting up a delay for INIT_ACK with
-	# tc on $SERVER_NS side
-	tc -n $SERVER_NS qdisc add dev link0 root handle 1: htb
-	tc -n $SERVER_NS class add dev link0 parent 1: classid 1:1 htb rate 100mbit
-	tc -n $SERVER_NS filter add dev link0 parent 1: protocol ip u32 match ip protocol 132 \
-		0xff match u8 2 0xff at 32 flowid 1:1
-	tc -n $SERVER_NS qdisc add dev link0 parent 1:1 handle 10: netem delay 1200ms
-
-	# simulate the ctstate check on OVS nf_conntrack
-	ip net exec $ROUTER_NS iptables -A FORWARD -m state --state INVALID,UNTRACKED -j DROP
-	ip net exec $ROUTER_NS iptables -A INPUT -p sctp -j DROP
-
-	# use a smaller number for assoc's max_retrans to reproduce the issue
-	modprobe sctp
-	ip net exec $CLIENT_NS sysctl -wq net.sctp.association_max_retrans=3
-}
-
-cleanup() {
-	ip net exec $CLIENT_NS pkill sctp_collision 2>&1 >/dev/null
-	ip net exec $SERVER_NS pkill sctp_collision 2>&1 >/dev/null
-	ip net del "$CLIENT_NS"
-	ip net del "$SERVER_NS"
-	ip net del "$ROUTER_NS"
-}
-
-do_test() {
-	ip net exec $SERVER_NS ./sctp_collision server \
-		$SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT &
-	ip net exec $CLIENT_NS ./sctp_collision client \
-		$CLIENT_IP $CLIENT_PORT $SERVER_IP $SERVER_PORT
-}
-
-# NOTE: one way to work around the issue is set a smaller hb_interval
-# ip net exec $CLIENT_NS sysctl -wq net.sctp.hb_interval=3500
-
-# run the test case
-trap cleanup EXIT
-setup && \
-echo "Test for SCTP Collision in nf_conntrack:" && \
-do_test && echo "PASS!"
-exit $?
diff --git a/tools/testing/selftests/netfilter/conntrack_tcp_unreplied.sh b/tools/testing/selftests/netfilter/conntrack_tcp_unreplied.sh
deleted file mode 100755
index e7d7bf13cff5..000000000000
--- a/tools/testing/selftests/netfilter/conntrack_tcp_unreplied.sh
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Check that UNREPLIED tcp conntrack will eventually timeout.
-#
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-waittime=20
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-cleanup() {
-	ip netns pids $ns1 | xargs kill 2>/dev/null
-	ip netns pids $ns2 | xargs kill 2>/dev/null
-
-	ip netns del $ns1
-	ip netns del $ns2
-}
-
-ipv4() {
-    echo -n 192.168.$1.2
-}
-
-check_counter()
-{
-	ns=$1
-	name=$2
-	expect=$3
-	local lret=0
-
-	cnt=$(ip netns exec $ns2 nft list counter inet filter "$name" | grep -q "$expect")
-	if [ $? -ne 0 ]; then
-		echo "ERROR: counter $name in $ns2 has unexpected value (expected $expect)" 1>&2
-		ip netns exec $ns2 nft list counter inet filter "$name" 1>&2
-		lret=1
-	fi
-
-	return $lret
-}
-
-# Create test namespaces
-ip netns add $ns1 || exit 1
-
-trap cleanup EXIT
-
-ip netns add $ns2 || exit 1
-
-# Connect the namespace to the host using a veth pair
-ip -net $ns1 link add name veth1 type veth peer name veth2
-ip -net $ns1 link set netns $ns2 dev veth2
-
-ip -net $ns1 link set up dev lo
-ip -net $ns2 link set up dev lo
-ip -net $ns1 link set up dev veth1
-ip -net $ns2 link set up dev veth2
-
-ip -net $ns2 addr add 10.11.11.2/24 dev veth2
-ip -net $ns2 route add default via 10.11.11.1
-
-ip netns exec $ns2 sysctl -q net.ipv4.conf.veth2.forwarding=1
-
-# add a rule inside NS so we enable conntrack
-ip netns exec $ns1 iptables -A INPUT -m state --state established,related -j ACCEPT
-
-ip -net $ns1 addr add 10.11.11.1/24 dev veth1
-ip -net $ns1 route add 10.99.99.99 via 10.11.11.2
-
-# Check connectivity works
-ip netns exec $ns1 ping -q -c 2 10.11.11.2 >/dev/null || exit 1
-
-ip netns exec $ns2 nc -l -p 8080 < /dev/null &
-
-# however, conntrack entries are there
-
-ip netns exec $ns2 nft -f - <<EOF
-table inet filter {
-	counter connreq { }
-	counter redir { }
-	chain input {
-		type filter hook input priority 0; policy accept;
-		ct state new tcp flags syn ip daddr 10.99.99.99 tcp dport 80 counter name "connreq" accept
-		ct state new ct status dnat tcp dport 8080 counter name "redir" accept
-	}
-}
-EOF
-if [ $? -ne 0 ]; then
-	echo "ERROR: Could not load nft rules"
-	exit 1
-fi
-
-ip netns exec $ns2 sysctl -q net.netfilter.nf_conntrack_tcp_timeout_syn_sent=10
-
-echo "INFO: connect $ns1 -> $ns2 to the virtual ip"
-ip netns exec $ns1 bash -c 'while true ; do
-	nc -p 60000 10.99.99.99 80
-	sleep 1
-	done' &
-
-sleep 1
-
-ip netns exec $ns2 nft -f - <<EOF
-table inet nat {
-	chain prerouting {
-		type nat hook prerouting priority 0; policy accept;
-		ip daddr 10.99.99.99 tcp dport 80 redirect to :8080
-	}
-}
-EOF
-if [ $? -ne 0 ]; then
-	echo "ERROR: Could not load nat redirect"
-	exit 1
-fi
-
-count=$(ip netns exec $ns2 conntrack -L -p tcp --dport 80 2>/dev/null | wc -l)
-if [ $count -eq 0 ]; then
-	echo "ERROR: $ns2 did not pick up tcp connection from peer"
-	exit 1
-fi
-
-echo "INFO: NAT redirect added in ns $ns2, waiting for $waittime seconds for nat to take effect"
-for i in $(seq 1 $waittime); do
-	echo -n "."
-
-	sleep 1
-
-	count=$(ip netns exec $ns2 conntrack -L -p tcp --reply-port-src 8080 2>/dev/null | wc -l)
-	if [ $count -gt 0 ]; then
-		echo
-		echo "PASS: redirection took effect after $i seconds"
-		break
-	fi
-
-	m=$((i%20))
-	if [ $m -eq 0 ]; then
-		echo " waited for $i seconds"
-	fi
-done
-
-expect="packets 1 bytes 60"
-check_counter "$ns2" "redir" "$expect"
-if [ $? -ne 0 ]; then
-	ret=1
-fi
-
-if [ $ret -eq 0 ];then
-	echo "PASS: redirection counter has expected values"
-else
-	echo "ERROR: no tcp connection was redirected"
-fi
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
deleted file mode 100755
index c3b8f90c497e..000000000000
--- a/tools/testing/selftests/netfilter/ipvs.sh
+++ /dev/null
@@ -1,228 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-#
-# End-to-end ipvs test suite
-# Topology:
-#--------------------------------------------------------------+
-#                      |                                       |
-#         ns0          |         ns1                           |
-#      -----------     |     -----------    -----------        |
-#      | veth01  | --------- | veth10  |    | veth12  |        |
-#      -----------    peer   -----------    -----------        |
-#           |          |                        |              |
-#      -----------     |                        |              |
-#      |  br0    |     |-----------------  peer |--------------|
-#      -----------     |                        |              |
-#           |          |                        |              |
-#      ----------     peer   ----------      -----------       |
-#      |  veth02 | --------- |  veth20 |     | veth21  |       |
-#      ----------      |     ----------      -----------       |
-#                      |         ns2                           |
-#                      |                                       |
-#--------------------------------------------------------------+
-#
-# We assume that all network driver are loaded
-#
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-GREEN='\033[0;92m'
-RED='\033[0;31m'
-NC='\033[0m' # No Color
-
-readonly port=8080
-
-readonly vip_v4=207.175.44.110
-readonly cip_v4=10.0.0.2
-readonly gip_v4=10.0.0.1
-readonly dip_v4=172.16.0.1
-readonly rip_v4=172.16.0.2
-readonly sip_v4=10.0.0.3
-
-readonly infile="$(mktemp)"
-readonly outfile="$(mktemp)"
-readonly datalen=32
-
-sysipvsnet="/proc/sys/net/ipv4/vs/"
-if [ ! -d $sysipvsnet ]; then
-	modprobe -q ip_vs
-	if [ $? -ne 0 ]; then
-		echo "skip: could not run test without ipvs module"
-		exit $ksft_skip
-	fi
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ]; then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-ipvsadm -v > /dev/null 2>&1
-if [ $? -ne 0 ]; then
-	echo "SKIP: Could not run test without ipvsadm"
-	exit $ksft_skip
-fi
-
-setup() {
-	ip netns add ns0
-	ip netns add ns1
-	ip netns add ns2
-
-	ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
-	ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
-	ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
-
-	ip netns exec ns0 ip link set veth01 up
-	ip netns exec ns0 ip link set veth02 up
-	ip netns exec ns0 ip link add br0 type bridge
-	ip netns exec ns0 ip link set veth01 master br0
-	ip netns exec ns0 ip link set veth02 master br0
-	ip netns exec ns0 ip link set br0 up
-	ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
-
-	ip netns exec ns1 ip link set lo up
-	ip netns exec ns1 ip link set veth10 up
-	ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
-	ip netns exec ns1 ip link set veth12 up
-	ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
-
-	ip netns exec ns2 ip link set lo up
-	ip netns exec ns2 ip link set veth21 up
-	ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
-	ip netns exec ns2 ip link set veth20 up
-	ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
-
-	sleep 1
-
-	dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none
-}
-
-cleanup() {
-	for i in 0 1 2
-	do
-		ip netns del ns$i > /dev/null 2>&1
-	done
-
-	if [ -f "${outfile}" ]; then
-		rm "${outfile}"
-	fi
-	if [ -f "${infile}" ]; then
-		rm "${infile}"
-	fi
-}
-
-server_listen() {
-	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
-	server_pid=$!
-	sleep 0.2
-}
-
-client_connect() {
-	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
-}
-
-verify_data() {
-	wait "${server_pid}"
-	cmp "$infile" "$outfile" 2>/dev/null
-}
-
-test_service() {
-	server_listen
-	client_connect
-	verify_data
-}
-
-
-test_dr() {
-	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
-
-	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
-	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
-	ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
-	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
-
-	# avoid incorrect arp response
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
-	# avoid reverse route lookup
-	ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
-	ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
-	ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
-
-	test_service
-}
-
-test_nat() {
-	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
-
-	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
-	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
-	ip netns exec ns1 ipvsadm -a -m -t ${vip_v4}:${port} -r ${rip_v4}:${port}
-	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
-
-	ip netns exec ns2 ip link del veth20
-	ip netns exec ns2 ip route add default via ${dip_v4} dev veth21
-
-	test_service
-}
-
-test_tun() {
-	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
-
-	ip netns exec ns1 modprobe ipip
-	ip netns exec ns1 ip link set tunl0 up
-	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=0
-	ip netns exec ns1 sysctl -qw net.ipv4.conf.all.send_redirects=0
-	ip netns exec ns1 sysctl -qw net.ipv4.conf.default.send_redirects=0
-	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
-	ip netns exec ns1 ipvsadm -a -i -t ${vip_v4}:${port} -r ${rip_v4}:${port}
-	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
-
-	ip netns exec ns2 modprobe ipip
-	ip netns exec ns2 ip link set tunl0 up
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.tunl0.rp_filter=0
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.veth21.rp_filter=0
-	ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
-
-	test_service
-}
-
-run_tests() {
-	local errors=
-
-	echo "Testing DR mode..."
-	cleanup
-	setup
-	test_dr
-	errors=$(( $errors + $? ))
-
-	echo "Testing NAT mode..."
-	cleanup
-	setup
-	test_nat
-	errors=$(( $errors + $? ))
-
-	echo "Testing Tunnel mode..."
-	cleanup
-	setup
-	test_tun
-	errors=$(( $errors + $? ))
-
-	return $errors
-}
-
-trap cleanup EXIT
-
-run_tests
-
-if [ $? -ne 0 ]; then
-	echo -e "$(basename $0): ${RED}FAIL${NC}"
-	exit 1
-fi
-echo -e "$(basename $0): ${GREEN}PASS${NC}"
-exit 0
diff --git a/tools/testing/selftests/netfilter/nf_nat_edemux.sh b/tools/testing/selftests/netfilter/nf_nat_edemux.sh
deleted file mode 100755
index a1aa8f4a5828..000000000000
--- a/tools/testing/selftests/netfilter/nf_nat_edemux.sh
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Test NAT source port clash resolution
-#
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-socatpid=0
-
-cleanup()
-{
-	[ $socatpid -gt 0 ] && kill $socatpid
-	ip netns del $ns1
-	ip netns del $ns2
-}
-
-socat -h > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without socat"
-	exit $ksft_skip
-fi
-
-iptables --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without iptables"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-ip netns add "$ns1"
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace $ns1"
-	exit $ksft_skip
-fi
-
-trap cleanup EXIT
-
-ip netns add $ns2
-
-# Connect the namespaces using a veth pair
-ip link add name veth2 type veth peer name veth1
-ip link set netns $ns1 dev veth1
-ip link set netns $ns2 dev veth2
-
-ip netns exec $ns1 ip link set up dev lo
-ip netns exec $ns1 ip link set up dev veth1
-ip netns exec $ns1 ip addr add 192.168.1.1/24 dev veth1
-
-ip netns exec $ns2 ip link set up dev lo
-ip netns exec $ns2 ip link set up dev veth2
-ip netns exec $ns2 ip addr add 192.168.1.2/24 dev veth2
-
-# Create a server in one namespace
-ip netns exec $ns1 socat -u TCP-LISTEN:5201,fork OPEN:/dev/null,wronly=1 &
-socatpid=$!
-
-# Restrict source port to just one so we don't have to exhaust
-# all others.
-ip netns exec $ns2 sysctl -q net.ipv4.ip_local_port_range="10000 10000"
-
-# add a virtual IP using DNAT
-ip netns exec $ns2 iptables -t nat -A OUTPUT -d 10.96.0.1/32 -p tcp --dport 443 -j DNAT --to-destination 192.168.1.1:5201
-
-# ... and route it to the other namespace
-ip netns exec $ns2 ip route add 10.96.0.1 via 192.168.1.1
-
-sleep 1
-
-# add a persistent connection from the other namespace
-ip netns exec $ns2 socat -t 10 - TCP:192.168.1.1:5201 > /dev/null &
-
-sleep 1
-
-# ip daddr:dport will be rewritten to 192.168.1.1 5201
-# NAT must reallocate source port 10000 because
-# 192.168.1.2:10000 -> 192.168.1.1:5201 is already in use
-echo test | ip netns exec $ns2 socat -t 3 -u STDIN TCP:10.96.0.1:443,connect-timeout=3 >/dev/null
-ret=$?
-
-# Check socat can connect to 10.96.0.1:443 (aka 192.168.1.1:5201).
-if [ $ret -eq 0 ]; then
-	echo "PASS: socat can connect via NAT'd address"
-else
-	echo "FAIL: socat cannot connect via NAT'd address"
-fi
-
-# check sport clashres.
-ip netns exec $ns1 iptables -t nat -A PREROUTING -p tcp --dport 5202 -j REDIRECT --to-ports 5201
-ip netns exec $ns1 iptables -t nat -A PREROUTING -p tcp --dport 5203 -j REDIRECT --to-ports 5201
-
-sleep 5 | ip netns exec $ns2 socat -t 5 -u STDIN TCP:192.168.1.1:5202,connect-timeout=5 >/dev/null &
-cpid1=$!
-sleep 1
-
-# if connect succeeds, client closes instantly due to EOF on stdin.
-# if connect hangs, it will time out after 5s.
-echo | ip netns exec $ns2 socat -t 3 -u STDIN TCP:192.168.1.1:5203,connect-timeout=5 >/dev/null &
-cpid2=$!
-
-time_then=$(date +%s)
-wait $cpid2
-rv=$?
-time_now=$(date +%s)
-
-# Check how much time has elapsed, expectation is for
-# 'cpid2' to connect and then exit (and no connect delay).
-delta=$((time_now - time_then))
-
-if [ $delta -lt 2 -a $rv -eq 0 ]; then
-	echo "PASS: could connect to service via redirected ports"
-else
-	echo "FAIL: socat cannot connect to service via redirect ($delta seconds elapsed, returned $rv)"
-	ret=1
-fi
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_conntrack_helper.sh b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh
deleted file mode 100755
index faa7778d7bd1..000000000000
--- a/tools/testing/selftests/netfilter/nft_conntrack_helper.sh
+++ /dev/null
@@ -1,197 +0,0 @@
-#!/bin/bash
-#
-# This tests connection tracking helper assignment:
-# 1. can attach ftp helper to a connection from nft ruleset.
-# 2. auto-assign still works.
-#
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-testipv6=1
-
-cleanup()
-{
-	ip netns del ${ns1}
-	ip netns del ${ns2}
-}
-
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-conntrack -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without conntrack tool"
-	exit $ksft_skip
-fi
-
-which nc >/dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without netcat tool"
-	exit $ksft_skip
-fi
-
-trap cleanup EXIT
-
-ip netns add ${ns1}
-ip netns add ${ns2}
-
-ip link add veth0 netns ${ns1} type veth peer name veth0 netns ${ns2} > /dev/null 2>&1
-if [ $? -ne 0 ];then
-    echo "SKIP: No virtual ethernet pair device support in kernel"
-    exit $ksft_skip
-fi
-
-ip -net ${ns1} link set lo up
-ip -net ${ns1} link set veth0 up
-
-ip -net ${ns2} link set lo up
-ip -net ${ns2} link set veth0 up
-
-ip -net ${ns1} addr add 10.0.1.1/24 dev veth0
-ip -net ${ns1} addr add dead:1::1/64 dev veth0
-
-ip -net ${ns2} addr add 10.0.1.2/24 dev veth0
-ip -net ${ns2} addr add dead:1::2/64 dev veth0
-
-load_ruleset_family() {
-	local family=$1
-	local ns=$2
-
-ip netns exec ${ns} nft -f - <<EOF
-table $family raw {
-	ct helper ftp {
-             type "ftp" protocol tcp
-        }
-	chain pre {
-		type filter hook prerouting priority 0; policy accept;
-		tcp dport 2121 ct helper set "ftp"
-	}
-	chain output {
-		type filter hook output priority 0; policy accept;
-		tcp dport 2121 ct helper set "ftp"
-	}
-}
-EOF
-	return $?
-}
-
-check_for_helper()
-{
-	local netns=$1
-	local message=$2
-	local port=$3
-
-	if echo $message |grep -q 'ipv6';then
-		local family="ipv6"
-	else
-		local family="ipv4"
-	fi
-
-	ip netns exec ${netns} conntrack -L -f $family -p tcp --dport $port 2> /dev/null |grep -q 'helper=ftp'
-	if [ $? -ne 0 ] ; then
-		if [ $autoassign -eq 0 ] ;then
-			echo "FAIL: ${netns} did not show attached helper $message" 1>&2
-			ret=1
-		else
-			echo "PASS: ${netns} did not show attached helper $message" 1>&2
-		fi
-	else
-		if [ $autoassign -eq 0 ] ;then
-			echo "PASS: ${netns} connection on port $port has ftp helper attached" 1>&2
-		else
-			echo "FAIL: ${netns} connection on port $port has ftp helper attached" 1>&2
-			ret=1
-		fi
-	fi
-
-	return 0
-}
-
-test_helper()
-{
-	local port=$1
-	local autoassign=$2
-
-	if [ $autoassign -eq 0 ] ;then
-		msg="set via ruleset"
-	else
-		msg="auto-assign"
-	fi
-
-	sleep 3 | ip netns exec ${ns2} nc -w 2 -l -p $port > /dev/null &
-
-	sleep 1 | ip netns exec ${ns1} nc -w 2 10.0.1.2 $port > /dev/null &
-	sleep 1
-
-	check_for_helper "$ns1" "ip $msg" $port $autoassign
-	check_for_helper "$ns2" "ip $msg" $port $autoassign
-
-	wait
-
-	if [ $testipv6 -eq 0 ] ;then
-		return 0
-	fi
-
-	ip netns exec ${ns1} conntrack -F 2> /dev/null
-	ip netns exec ${ns2} conntrack -F 2> /dev/null
-
-	sleep 3 | ip netns exec ${ns2} nc -w 2 -6 -l -p $port > /dev/null &
-
-	sleep 1 | ip netns exec ${ns1} nc -w 2 -6 dead:1::2 $port > /dev/null &
-	sleep 1
-
-	check_for_helper "$ns1" "ipv6 $msg" $port
-	check_for_helper "$ns2" "ipv6 $msg" $port
-
-	wait
-}
-
-load_ruleset_family ip ${ns1}
-if [ $? -ne 0 ];then
-	echo "FAIL: ${ns1} cannot load ip ruleset" 1>&2
-	exit 1
-fi
-
-load_ruleset_family ip6 ${ns1}
-if [ $? -ne 0 ];then
-	echo "SKIP: ${ns1} cannot load ip6 ruleset" 1>&2
-	testipv6=0
-fi
-
-load_ruleset_family inet ${ns2}
-if [ $? -ne 0 ];then
-	echo "SKIP: ${ns1} cannot load inet ruleset" 1>&2
-	load_ruleset_family ip ${ns2}
-	if [ $? -ne 0 ];then
-		echo "FAIL: ${ns2} cannot load ip ruleset" 1>&2
-		exit 1
-	fi
-
-	if [ $testipv6 -eq 1 ] ;then
-		load_ruleset_family ip6 ${ns2}
-		if [ $? -ne 0 ];then
-			echo "FAIL: ${ns2} cannot load ip6 ruleset" 1>&2
-			exit 1
-		fi
-	fi
-fi
-
-test_helper 2121 0
-ip netns exec ${ns1} sysctl -qe 'net.netfilter.nf_conntrack_helper=1'
-ip netns exec ${ns2} sysctl -qe 'net.netfilter.nf_conntrack_helper=1'
-test_helper 21 1
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_fib.sh b/tools/testing/selftests/netfilter/nft_fib.sh
deleted file mode 100755
index dff476e45e77..000000000000
--- a/tools/testing/selftests/netfilter/nft_fib.sh
+++ /dev/null
@@ -1,273 +0,0 @@
-#!/bin/bash
-#
-# This tests the fib expression.
-#
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-nsrouter="nsrouter-$sfx"
-timeout=4
-
-log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
-
-cleanup()
-{
-	ip netns del ${ns1}
-	ip netns del ${ns2}
-	ip netns del ${nsrouter}
-
-	[ $log_netns -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns
-}
-
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-ip netns add ${nsrouter}
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace"
-	exit $ksft_skip
-fi
-
-trap cleanup EXIT
-
-dmesg | grep -q ' nft_rpfilter: '
-if [ $? -eq 0 ]; then
-	dmesg -c | grep ' nft_rpfilter: '
-	echo "WARN: a previous test run has failed" 1>&2
-fi
-
-sysctl -q net.netfilter.nf_log_all_netns=1
-ip netns add ${ns1}
-ip netns add ${ns2}
-
-load_ruleset() {
-	local netns=$1
-
-ip netns exec ${netns} nft -f /dev/stdin <<EOF
-table inet filter {
-	chain prerouting {
-		type filter hook prerouting priority 0; policy accept;
-	        fib saddr . iif oif missing counter log prefix "$netns nft_rpfilter: " drop
-	}
-}
-EOF
-}
-
-load_pbr_ruleset() {
-	local netns=$1
-
-ip netns exec ${netns} nft -f /dev/stdin <<EOF
-table inet filter {
-	chain forward {
-		type filter hook forward priority raw;
-		fib saddr . iif oif gt 0 accept
-		log drop
-	}
-}
-EOF
-}
-
-load_ruleset_count() {
-	local netns=$1
-
-ip netns exec ${netns} nft -f /dev/stdin <<EOF
-table inet filter {
-	chain prerouting {
-		type filter hook prerouting priority 0; policy accept;
-		ip daddr 1.1.1.1 fib saddr . iif oif missing counter drop
-		ip6 daddr 1c3::c01d fib saddr . iif oif missing counter drop
-	}
-}
-EOF
-}
-
-check_drops() {
-	dmesg | grep -q ' nft_rpfilter: '
-	if [ $? -eq 0 ]; then
-		dmesg | grep ' nft_rpfilter: '
-		echo "FAIL: rpfilter did drop packets"
-		return 1
-	fi
-
-	return 0
-}
-
-check_fib_counter() {
-	local want=$1
-	local ns=$2
-	local address=$3
-
-	line=$(ip netns exec ${ns} nft list table inet filter | grep 'fib saddr . iif' | grep $address | grep "packets $want" )
-	ret=$?
-
-	if [ $ret -ne 0 ];then
-		echo "Netns $ns fib counter doesn't match expected packet count of $want for $address" 1>&2
-		ip netns exec ${ns} nft list table inet filter
-		return 1
-	fi
-
-	if [ $want -gt 0 ]; then
-		echo "PASS: fib expression did drop packets for $address"
-	fi
-
-	return 0
-}
-
-load_ruleset ${nsrouter}
-load_ruleset ${ns1}
-load_ruleset ${ns2}
-
-ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1
-if [ $? -ne 0 ];then
-    echo "SKIP: No virtual ethernet pair device support in kernel"
-    exit $ksft_skip
-fi
-ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2}
-
-ip -net ${nsrouter} link set lo up
-ip -net ${nsrouter} link set veth0 up
-ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0
-ip -net ${nsrouter} addr add dead:1::1/64 dev veth0
-
-ip -net ${nsrouter} link set veth1 up
-ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1
-ip -net ${nsrouter} addr add dead:2::1/64 dev veth1
-
-ip -net ${ns1} link set lo up
-ip -net ${ns1} link set eth0 up
-
-ip -net ${ns2} link set lo up
-ip -net ${ns2} link set eth0 up
-
-ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
-ip -net ${ns1} addr add dead:1::99/64 dev eth0
-ip -net ${ns1} route add default via 10.0.1.1
-ip -net ${ns1} route add default via dead:1::1
-
-ip -net ${ns2} addr add 10.0.2.99/24 dev eth0
-ip -net ${ns2} addr add dead:2::99/64 dev eth0
-ip -net ${ns2} route add default via 10.0.2.1
-ip -net ${ns2} route add default via dead:2::1
-
-test_ping() {
-  local daddr4=$1
-  local daddr6=$2
-
-  ip netns exec ${ns1} ping -c 1 -q $daddr4 > /dev/null
-  ret=$?
-  if [ $ret -ne 0 ];then
-	check_drops
-	echo "FAIL: ${ns1} cannot reach $daddr4, ret $ret" 1>&2
-	return 1
-  fi
-
-  ip netns exec ${ns1} ping -c 3 -q $daddr6 > /dev/null
-  ret=$?
-  if [ $ret -ne 0 ];then
-	check_drops
-	echo "FAIL: ${ns1} cannot reach $daddr6, ret $ret" 1>&2
-	return 1
-  fi
-
-  return 0
-}
-
-ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.all.rp_filter=0 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.rp_filter=0 > /dev/null
-
-sleep 3
-
-test_ping 10.0.2.1 dead:2::1 || exit 1
-check_drops || exit 1
-
-test_ping 10.0.2.99 dead:2::99 || exit 1
-check_drops || exit 1
-
-echo "PASS: fib expression did not cause unwanted packet drops"
-
-ip netns exec ${nsrouter} nft flush table inet filter
-
-ip -net ${ns1} route del default
-ip -net ${ns1} -6 route del default
-
-ip -net ${ns1} addr del 10.0.1.99/24 dev eth0
-ip -net ${ns1} addr del dead:1::99/64 dev eth0
-
-ip -net ${ns1} addr add 10.0.2.99/24 dev eth0
-ip -net ${ns1} addr add dead:2::99/64 dev eth0
-
-ip -net ${ns1} route add default via 10.0.2.1
-ip -net ${ns1} -6 route add default via dead:2::1
-
-ip -net ${nsrouter} addr add dead:2::1/64 dev veth0
-
-# switch to ruleset that doesn't log, this time
-# its expected that this does drop the packets.
-load_ruleset_count ${nsrouter}
-
-# ns1 has a default route, but nsrouter does not.
-# must not check return value, ping to 1.1.1.1 will
-# fail.
-check_fib_counter 0 ${nsrouter} 1.1.1.1 || exit 1
-check_fib_counter 0 ${nsrouter} 1c3::c01d || exit 1
-
-ip netns exec ${ns1} ping -c 1 -W 1 -q 1.1.1.1 > /dev/null
-check_fib_counter 1 ${nsrouter} 1.1.1.1 || exit 1
-
-sleep 2
-ip netns exec ${ns1} ping -c 3 -q 1c3::c01d > /dev/null
-check_fib_counter 3 ${nsrouter} 1c3::c01d || exit 1
-
-# delete all rules
-ip netns exec ${ns1} nft flush ruleset
-ip netns exec ${ns2} nft flush ruleset
-ip netns exec ${nsrouter} nft flush ruleset
-
-ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
-ip -net ${ns1} addr add dead:1::99/64 dev eth0
-
-ip -net ${ns1} addr del 10.0.2.99/24 dev eth0
-ip -net ${ns1} addr del dead:2::99/64 dev eth0
-
-ip -net ${nsrouter} addr del dead:2::1/64 dev veth0
-
-# ... pbr ruleset for the router, check iif+oif.
-load_pbr_ruleset ${nsrouter}
-if [ $? -ne 0 ] ; then
-	echo "SKIP: Could not load fib forward ruleset"
-	exit $ksft_skip
-fi
-
-ip -net ${nsrouter} rule add from all table 128
-ip -net ${nsrouter} rule add from all iif veth0 table 129
-ip -net ${nsrouter} route add table 128 to 10.0.1.0/24 dev veth0
-ip -net ${nsrouter} route add table 129 to 10.0.2.0/24 dev veth1
-
-# drop main ipv4 table
-ip -net ${nsrouter} -4 rule delete table main
-
-test_ping 10.0.2.99 dead:2::99
-if [ $? -ne 0 ] ; then
-	ip -net ${nsrouter} nft list ruleset
-	echo "FAIL: fib mismatch in pbr setup"
-	exit 1
-fi
-
-echo "PASS: fib expression forward check with policy based routing"
-exit 0
diff --git a/tools/testing/selftests/netfilter/nft_queue.sh b/tools/testing/selftests/netfilter/nft_queue.sh
deleted file mode 100755
index e12729753351..000000000000
--- a/tools/testing/selftests/netfilter/nft_queue.sh
+++ /dev/null
@@ -1,449 +0,0 @@
-#!/bin/bash
-#
-# This tests nf_queue:
-# 1. can process packets from all hooks
-# 2. support running nfqueue from more than one base chain
-#
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
-nsrouter="nsrouter-$sfx"
-timeout=4
-
-cleanup()
-{
-	ip netns pids ${ns1} | xargs kill 2>/dev/null
-	ip netns pids ${ns2} | xargs kill 2>/dev/null
-	ip netns pids ${nsrouter} | xargs kill 2>/dev/null
-
-	ip netns del ${ns1}
-	ip netns del ${ns2}
-	ip netns del ${nsrouter}
-	rm -f "$TMPFILE0"
-	rm -f "$TMPFILE1"
-	rm -f "$TMPFILE2" "$TMPFILE3"
-}
-
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-ip netns add ${nsrouter}
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace"
-	exit $ksft_skip
-fi
-
-TMPFILE0=$(mktemp)
-TMPFILE1=$(mktemp)
-TMPFILE2=$(mktemp)
-TMPFILE3=$(mktemp)
-trap cleanup EXIT
-
-ip netns add ${ns1}
-ip netns add ${ns2}
-
-ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1
-if [ $? -ne 0 ];then
-    echo "SKIP: No virtual ethernet pair device support in kernel"
-    exit $ksft_skip
-fi
-ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2}
-
-ip -net ${nsrouter} link set lo up
-ip -net ${nsrouter} link set veth0 up
-ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0
-ip -net ${nsrouter} addr add dead:1::1/64 dev veth0
-
-ip -net ${nsrouter} link set veth1 up
-ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1
-ip -net ${nsrouter} addr add dead:2::1/64 dev veth1
-
-ip -net ${ns1} link set lo up
-ip -net ${ns1} link set eth0 up
-
-ip -net ${ns2} link set lo up
-ip -net ${ns2} link set eth0 up
-
-ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
-ip -net ${ns1} addr add dead:1::99/64 dev eth0
-ip -net ${ns1} route add default via 10.0.1.1
-ip -net ${ns1} route add default via dead:1::1
-
-ip -net ${ns2} addr add 10.0.2.99/24 dev eth0
-ip -net ${ns2} addr add dead:2::99/64 dev eth0
-ip -net ${ns2} route add default via 10.0.2.1
-ip -net ${ns2} route add default via dead:2::1
-
-load_ruleset() {
-	local name=$1
-	local prio=$2
-
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
-table inet $name {
-	chain nfq {
-		ip protocol icmp queue bypass
-		icmpv6 type { "echo-request", "echo-reply" } queue num 1 bypass
-	}
-	chain pre {
-		type filter hook prerouting priority $prio; policy accept;
-		jump nfq
-	}
-	chain input {
-		type filter hook input priority $prio; policy accept;
-		jump nfq
-	}
-	chain forward {
-		type filter hook forward priority $prio; policy accept;
-		tcp dport 12345 queue num 2
-		jump nfq
-	}
-	chain output {
-		type filter hook output priority $prio; policy accept;
-		tcp dport 12345 queue num 3
-		tcp sport 23456 queue num 3
-		jump nfq
-	}
-	chain post {
-		type filter hook postrouting priority $prio; policy accept;
-		jump nfq
-	}
-}
-EOF
-}
-
-load_counter_ruleset() {
-	local prio=$1
-
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
-table inet countrules {
-	chain pre {
-		type filter hook prerouting priority $prio; policy accept;
-		counter
-	}
-	chain input {
-		type filter hook input priority $prio; policy accept;
-		counter
-	}
-	chain forward {
-		type filter hook forward priority $prio; policy accept;
-		counter
-	}
-	chain output {
-		type filter hook output priority $prio; policy accept;
-		counter
-	}
-	chain post {
-		type filter hook postrouting priority $prio; policy accept;
-		counter
-	}
-}
-EOF
-}
-
-test_ping() {
-  ip netns exec ${ns1} ping -c 1 -q 10.0.2.99 > /dev/null
-  if [ $? -ne 0 ];then
-	return 1
-  fi
-
-  ip netns exec ${ns1} ping -c 1 -q dead:2::99 > /dev/null
-  if [ $? -ne 0 ];then
-	return 1
-  fi
-
-  return 0
-}
-
-test_ping_router() {
-  ip netns exec ${ns1} ping -c 1 -q 10.0.2.1 > /dev/null
-  if [ $? -ne 0 ];then
-	return 1
-  fi
-
-  ip netns exec ${ns1} ping -c 1 -q dead:2::1 > /dev/null
-  if [ $? -ne 0 ];then
-	return 1
-  fi
-
-  return 0
-}
-
-test_queue_blackhole() {
-	local proto=$1
-
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
-table $proto blackh {
-	chain forward {
-	type filter hook forward priority 0; policy accept;
-		queue num 600
-	}
-}
-EOF
-	if [ $proto = "ip" ] ;then
-		ip netns exec ${ns1} ping -W 2 -c 1 -q 10.0.2.99 > /dev/null
-		lret=$?
-	elif [ $proto = "ip6" ]; then
-		ip netns exec ${ns1} ping -W 2 -c 1 -q dead:2::99 > /dev/null
-		lret=$?
-	else
-		lret=111
-	fi
-
-	# queue without bypass keyword should drop traffic if no listener exists.
-	if [ $lret -eq 0 ];then
-		echo "FAIL: $proto expected failure, got $lret" 1>&2
-		exit 1
-	fi
-
-	ip netns exec ${nsrouter} nft delete table $proto blackh
-	if [ $? -ne 0 ] ;then
-	        echo "FAIL: $proto: Could not delete blackh table"
-	        exit 1
-	fi
-
-        echo "PASS: $proto: statement with no listener results in packet drop"
-}
-
-test_queue()
-{
-	local expected=$1
-	local last=""
-
-	# spawn nf-queue listeners
-	ip netns exec ${nsrouter} ./nf-queue -c -q 0 -t $timeout > "$TMPFILE0" &
-	ip netns exec ${nsrouter} ./nf-queue -c -q 1 -t $timeout > "$TMPFILE1" &
-	sleep 1
-	test_ping
-	ret=$?
-	if [ $ret -ne 0 ];then
-		echo "FAIL: netns routing/connectivity with active listener on queue $queue: $ret" 1>&2
-		exit $ret
-	fi
-
-	test_ping_router
-	ret=$?
-	if [ $ret -ne 0 ];then
-		echo "FAIL: netns router unreachable listener on queue $queue: $ret" 1>&2
-		exit $ret
-	fi
-
-	wait
-	ret=$?
-
-	for file in $TMPFILE0 $TMPFILE1; do
-		last=$(tail -n1 "$file")
-		if [ x"$last" != x"$expected packets total" ]; then
-			echo "FAIL: Expected $expected packets total, but got $last" 1>&2
-			cat "$file" 1>&2
-
-			ip netns exec ${nsrouter} nft list ruleset
-			exit 1
-		fi
-	done
-
-	echo "PASS: Expected and received $last"
-}
-
-test_tcp_forward()
-{
-	ip netns exec ${nsrouter} ./nf-queue -q 2 -t $timeout &
-	local nfqpid=$!
-
-	tmpfile=$(mktemp) || exit 1
-	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$tmpfile
-	ip netns exec ${ns2} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null &
-	local rpid=$!
-
-	sleep 1
-	ip netns exec ${ns1} nc -w 5 10.0.2.99 12345 <"$tmpfile" >/dev/null &
-
-	rm -f "$tmpfile"
-
-	wait $rpid
-	wait $lpid
-	[ $? -eq 0 ] && echo "PASS: tcp and nfqueue in forward chain"
-}
-
-test_tcp_localhost()
-{
-	tmpfile=$(mktemp) || exit 1
-
-	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$tmpfile
-	ip netns exec ${nsrouter} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null &
-	local rpid=$!
-
-	ip netns exec ${nsrouter} ./nf-queue -q 3 -t $timeout &
-	local nfqpid=$!
-
-	sleep 1
-	ip netns exec ${nsrouter} nc -w 5 127.0.0.1 12345 <"$tmpfile" > /dev/null
-	rm -f "$tmpfile"
-
-	wait $rpid
-	[ $? -eq 0 ] && echo "PASS: tcp via loopback"
-	wait 2>/dev/null
-}
-
-test_tcp_localhost_connectclose()
-{
-	tmpfile=$(mktemp) || exit 1
-
-	ip netns exec ${nsrouter} ./connect_close -p 23456 -t $timeout &
-
-	ip netns exec ${nsrouter} ./nf-queue -q 3 -t $timeout &
-	local nfqpid=$!
-
-	sleep 1
-	rm -f "$tmpfile"
-
-	wait $rpid
-	[ $? -eq 0 ] && echo "PASS: tcp via loopback with connect/close"
-	wait 2>/dev/null
-}
-
-test_tcp_localhost_requeue()
-{
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
-flush ruleset
-table inet filter {
-	chain output {
-		type filter hook output priority 0; policy accept;
-		tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0
-	}
-	chain post {
-		type filter hook postrouting priority 0; policy accept;
-		tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0
-	}
-}
-EOF
-	tmpfile=$(mktemp) || exit 1
-	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$tmpfile
-	ip netns exec ${nsrouter} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null &
-	local rpid=$!
-
-	ip netns exec ${nsrouter} ./nf-queue -c -q 1 -t $timeout > "$TMPFILE2" &
-
-	# nfqueue 1 will be called via output hook.  But this time,
-        # re-queue the packet to nfqueue program on queue 2.
-	ip netns exec ${nsrouter} ./nf-queue -G -d 150 -c -q 0 -Q 1 -t $timeout > "$TMPFILE3" &
-
-	sleep 1
-	ip netns exec ${nsrouter} nc -w 5 127.0.0.1 12345 <"$tmpfile" > /dev/null
-	rm -f "$tmpfile"
-
-	wait
-
-	if ! diff -u "$TMPFILE2" "$TMPFILE3" ; then
-		echo "FAIL: lost packets during requeue?!" 1>&2
-		return
-	fi
-
-	echo "PASS: tcp via loopback and re-queueing"
-}
-
-test_icmp_vrf() {
-	ip -net $ns1 link add tvrf type vrf table 9876
-	if [ $? -ne 0 ];then
-		echo "SKIP: Could not add vrf device"
-		return
-	fi
-
-	ip -net $ns1 li set eth0 master tvrf
-	ip -net $ns1 li set tvrf up
-
-	ip -net $ns1 route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876
-ip netns exec ${ns1} nft -f /dev/stdin <<EOF
-flush ruleset
-table inet filter {
-	chain output {
-		type filter hook output priority 0; policy accept;
-		meta oifname "tvrf" icmp type echo-request counter queue num 1
-		meta oifname "eth0" icmp type echo-request counter queue num 1
-	}
-	chain post {
-		type filter hook postrouting priority 0; policy accept;
-		meta oifname "tvrf" icmp type echo-request counter queue num 1
-		meta oifname "eth0" icmp type echo-request counter queue num 1
-	}
-}
-EOF
-	ip netns exec ${ns1} ./nf-queue -q 1 -t $timeout &
-	local nfqpid=$!
-
-	sleep 1
-	ip netns exec ${ns1} ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null
-
-	for n in output post; do
-		for d in tvrf eth0; do
-			ip netns exec ${ns1} nft list chain inet filter $n | grep -q "oifname \"$d\" icmp type echo-request counter packets 1"
-			if [ $? -ne 0 ] ; then
-				echo "FAIL: chain $n: icmp packet counter mismatch for device $d" 1>&2
-				ip netns exec ${ns1} nft list ruleset
-				ret=1
-				return
-			fi
-		done
-	done
-
-	wait $nfqpid
-	[ $? -eq 0 ] && echo "PASS: icmp+nfqueue via vrf"
-	wait 2>/dev/null
-}
-
-ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
-
-load_ruleset "filter" 0
-
-sleep 3
-
-test_ping
-ret=$?
-if [ $ret -eq 0 ];then
-	# queue bypass works (rules were skipped, no listener)
-	echo "PASS: ${ns1} can reach ${ns2}"
-else
-	echo "FAIL: ${ns1} cannot reach ${ns2}: $ret" 1>&2
-	exit $ret
-fi
-
-test_queue_blackhole ip
-test_queue_blackhole ip6
-
-# dummy ruleset to add base chains between the
-# queueing rules.  We don't want the second reinject
-# to re-execute the old hooks.
-load_counter_ruleset 10
-
-# we are hooking all: prerouting/input/forward/output/postrouting.
-# we ping ${ns2} from ${ns1} via ${nsrouter} using ipv4 and ipv6, so:
-# 1x icmp prerouting,forward,postrouting -> 3 queue events (6 incl. reply).
-# 1x icmp prerouting,input,output postrouting -> 4 queue events incl. reply.
-# so we expect that userspace program receives 10 packets.
-test_queue 10
-
-# same.  We queue to a second program as well.
-load_ruleset "filter2" 20
-test_queue 20
-
-test_tcp_forward
-test_tcp_localhost
-test_tcp_localhost_connectclose
-test_tcp_localhost_requeue
-test_icmp_vrf
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_synproxy.sh b/tools/testing/selftests/netfilter/nft_synproxy.sh
deleted file mode 100755
index b62933b680d6..000000000000
--- a/tools/testing/selftests/netfilter/nft_synproxy.sh
+++ /dev/null
@@ -1,117 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-rnd=$(mktemp -u XXXXXXXX)
-nsr="nsr-$rnd"	# synproxy machine
-ns1="ns1-$rnd"  # iperf client
-ns2="ns2-$rnd"  # iperf server
-
-checktool (){
-	if ! $1 > /dev/null 2>&1; then
-		echo "SKIP: Could not $2"
-		exit $ksft_skip
-	fi
-}
-
-checktool "nft --version" "run test without nft tool"
-checktool "ip -Version" "run test without ip tool"
-checktool "iperf3 --version" "run test without iperf3"
-checktool "ip netns add $nsr" "create net namespace"
-
-modprobe -q nf_conntrack
-
-ip netns add $ns1
-ip netns add $ns2
-
-cleanup() {
-	ip netns pids $ns1 | xargs kill 2>/dev/null
-	ip netns pids $ns2 | xargs kill 2>/dev/null
-	ip netns del $ns1
-	ip netns del $ns2
-
-	ip netns del $nsr
-}
-
-trap cleanup EXIT
-
-ip link add veth0 netns $nsr type veth peer name eth0 netns $ns1
-ip link add veth1 netns $nsr type veth peer name eth0 netns $ns2
-
-for dev in lo veth0 veth1; do
-ip -net $nsr link set $dev up
-done
-
-ip -net $nsr addr add 10.0.1.1/24 dev veth0
-ip -net $nsr addr add 10.0.2.1/24 dev veth1
-
-ip netns exec $nsr sysctl -q net.ipv4.conf.veth0.forwarding=1
-ip netns exec $nsr sysctl -q net.ipv4.conf.veth1.forwarding=1
-ip netns exec $nsr sysctl -q net.netfilter.nf_conntrack_tcp_loose=0
-
-for n in $ns1 $ns2; do
-  ip -net $n link set lo up
-  ip -net $n link set eth0 up
-done
-ip -net $ns1 addr add 10.0.1.99/24 dev eth0
-ip -net $ns2 addr add 10.0.2.99/24 dev eth0
-ip -net $ns1 route add default via 10.0.1.1
-ip -net $ns2 route add default via 10.0.2.1
-
-# test basic connectivity
-if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
-  echo "ERROR: $ns1 cannot reach $ns2" 1>&2
-  exit 1
-fi
-
-if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then
-  echo "ERROR: $ns2 cannot reach $ns1" 1>&2
-  exit 1
-fi
-
-ip netns exec $ns2 iperf3 -s > /dev/null 2>&1 &
-# ip netns exec $nsr tcpdump -vvv -n -i veth1 tcp | head -n 10 &
-
-sleep 1
-
-ip netns exec $nsr nft -f - <<EOF
-table inet filter {
-   chain prerouting {
-      type filter hook prerouting priority -300; policy accept;
-      meta iif veth0 tcp flags syn counter notrack
-   }
-
-  chain forward {
-      type filter hook forward priority 0; policy accept;
-
-      ct state new,established counter accept
-
-      meta iif veth0 meta l4proto tcp ct state untracked,invalid synproxy mss 1460 sack-perm timestamp
-
-      ct state invalid counter drop
-
-      # make ns2 unreachable w.o. tcp synproxy
-      tcp flags syn counter drop
-   }
-}
-EOF
-if [ $? -ne 0 ]; then
-	echo "SKIP: Cannot add nft synproxy"
-	exit $ksft_skip
-fi
-
-ip netns exec $ns1 timeout 5 iperf3 -c 10.0.2.99 -n $((1 * 1024 * 1024)) > /dev/null
-
-if [ $? -ne 0 ]; then
-	echo "FAIL: iperf3 returned an error" 1>&2
-	ret=$?
-	ip netns exec $nsr nft list ruleset
-else
-	echo "PASS: synproxy connection successful"
-fi
-
-exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_trans_stress.sh b/tools/testing/selftests/netfilter/nft_trans_stress.sh
deleted file mode 100755
index 2ffba45a78bf..000000000000
--- a/tools/testing/selftests/netfilter/nft_trans_stress.sh
+++ /dev/null
@@ -1,151 +0,0 @@
-#!/bin/bash
-#
-# This test is for stress-testing the nf_tables config plane path vs.
-# packet path processing: Make sure we never release rules that are
-# still visible to other cpus.
-#
-# set -e
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-testns=testns-$(mktemp -u "XXXXXXXX")
-tmp=""
-
-tables="foo bar baz quux"
-global_ret=0
-eret=0
-lret=0
-
-cleanup() {
-	ip netns pids "$testns" | xargs kill 2>/dev/null
-	ip netns del "$testns"
-
-	rm -f "$tmp"
-}
-
-check_result()
-{
-	local r=$1
-	local OK="PASS"
-
-	if [ $r -ne 0 ] ;then
-		OK="FAIL"
-		global_ret=$r
-	fi
-
-	echo "$OK: nft $2 test returned $r"
-
-	eret=0
-}
-
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-trap cleanup EXIT
-tmp=$(mktemp)
-
-for table in $tables; do
-	echo add table inet "$table" >> "$tmp"
-	echo flush table inet "$table" >> "$tmp"
-
-	echo "add chain inet $table INPUT { type filter hook input priority 0; }" >> "$tmp"
-	echo "add chain inet $table OUTPUT { type filter hook output priority 0; }" >> "$tmp"
-	for c in $(seq 1 400); do
-		chain=$(printf "chain%03u" "$c")
-		echo "add chain inet $table $chain" >> "$tmp"
-	done
-
-	for c in $(seq 1 400); do
-		chain=$(printf "chain%03u" "$c")
-		for BASE in INPUT OUTPUT; do
-			echo "add rule inet $table $BASE counter jump $chain" >> "$tmp"
-		done
-		echo "add rule inet $table $chain counter return" >> "$tmp"
-	done
-done
-
-ip netns add "$testns"
-ip -netns "$testns" link set lo up
-
-lscpu | grep ^CPU\(s\): | ( read cpu cpunum ;
-cpunum=$((cpunum-1))
-for i in $(seq 0 $cpunum);do
-	mask=$(printf 0x%x $((1<<$i)))
-        ip netns exec "$testns" taskset $mask ping -4 127.0.0.1 -fq > /dev/null &
-        ip netns exec "$testns" taskset $mask ping -6 ::1 -fq > /dev/null &
-done)
-
-sleep 1
-
-ip netns exec "$testns" nft -f "$tmp"
-for i in $(seq 1 10) ; do ip netns exec "$testns" nft -f "$tmp" & done
-
-for table in $tables;do
-	randsleep=$((RANDOM%2))
-	sleep $randsleep
-	ip netns exec "$testns" nft delete table inet $table
-	lret=$?
-	if [ $lret -ne 0 ]; then
-		eret=$lret
-	fi
-done
-
-check_result $eret "add/delete"
-
-for i in $(seq 1 10) ; do
-	(echo "flush ruleset"; cat "$tmp") | ip netns exec "$testns" nft -f /dev/stdin
-
-	lret=$?
-	if [ $lret -ne 0 ]; then
-		eret=$lret
-	fi
-done
-
-check_result $eret "reload"
-
-for i in $(seq 1 10) ; do
-	(echo "flush ruleset"; cat "$tmp"
-	 echo "insert rule inet foo INPUT meta nftrace set 1"
-	 echo "insert rule inet foo OUTPUT meta nftrace set 1"
-	 ) | ip netns exec "$testns" nft -f /dev/stdin
-	lret=$?
-	if [ $lret -ne 0 ]; then
-		eret=$lret
-	fi
-
-	(echo "flush ruleset"; cat "$tmp"
-	 ) | ip netns exec "$testns" nft -f /dev/stdin
-
-	lret=$?
-	if [ $lret -ne 0 ]; then
-		eret=$lret
-	fi
-done
-
-check_result $eret "add/delete with nftrace enabled"
-
-echo "insert rule inet foo INPUT meta nftrace set 1" >> $tmp
-echo "insert rule inet foo OUTPUT meta nftrace set 1" >> $tmp
-
-for i in $(seq 1 10) ; do
-	(echo "flush ruleset"; cat "$tmp") | ip netns exec "$testns" nft -f /dev/stdin
-
-	lret=$?
-	if [ $lret -ne 0 ]; then
-		eret=1
-	fi
-done
-
-check_result $lret "add/delete with nftrace enabled"
-
-exit $global_ret
diff --git a/tools/testing/selftests/netfilter/settings b/tools/testing/selftests/netfilter/settings
deleted file mode 100644
index 6091b45d226b..000000000000
--- a/tools/testing/selftests/netfilter/settings
+++ /dev/null
@@ -1 +0,0 @@
-timeout=120