Merge tag 'asoc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v5.4

Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on.  We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.

 - Lots and lots of cleanups from Morimoto-san and Yue Haibing.
 - Lots of cleanups and enhancements to the Freescale, sunxi dnd
   Intel rivers.
 - Initial Sound Open Firmware suppot for i.MX8.
 - Removal of w90x900 and nuc900 drivers as the platforms are
   being removed.
 - New support for Cirrus Logic CS47L15 and CS47L92, Freescale
   i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334

1 files changed, 43 insertions, 0 deletions

diff --git a/Documentation/powerpc/mpc52xx.rst b/Documentation/powerpc/mpc52xx.rst
new file mode 100644
index 000000000000..8676ac63e077
--- /dev/null
+++ b/Documentation/powerpc/mpc52xx.rst
@@ -0,0 +1,43 @@
+=============================
+Linux 2.6.x on MPC52xx family
+=============================
+
+For the latest info, go to http://www.246tNt.com/mpc52xx/
+
+To compile/use :
+
+  - U-Boot::
+
+     # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
+        if you wish to ).
+     # make lite5200_defconfig
+     # make uImage
+
+     then, on U-boot:
+     => tftpboot 200000 uImage
+     => tftpboot 400000 pRamdisk
+     => bootm 200000 400000
+
+  - DBug::
+
+     # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
+        if you wish to ).
+     # make lite5200_defconfig
+     # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
+     # make zImage.initrd
+     # make
+
+     then in DBug:
+     DBug> dn -i zImage.initrd.lite5200
+
+
+Some remarks:
+
+ - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
+   is not supported, and I'm not sure anyone is interesting in working on it
+   so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
+   nothing to do with the MPC5200. I also included the 'MPC' for the same
+   reason.
+ - Of course, I inspired myself from the 2.4 port. If you think I forgot to
+   mention you/your company in the copyright of some code, I'll correct it
+   ASAP.