summaryrefslogtreecommitdiff
path: root/arch/mips/pci
diff options
context:
space:
mode:
authorThomas Bogendoerfer <tbogendoerfer@suse.de>2019-05-08 00:09:13 +0300
committerPaul Burton <paul.burton@mips.com>2019-05-10 02:39:27 +0300
commita57140e9a850582ddafdd8f115b78713baaf0d00 (patch)
tree5bef10f17e75eb4b9168d7562856cfc9144e12c0 /arch/mips/pci
parent8041edb5920902adc9b28f2fcd9ccce395434ead (diff)
downloadlinux-a57140e9a850582ddafdd8f115b78713baaf0d00.tar.xz
MIPS: SGI-IP27: use generic PCI driver
Converted bridge code to a platform driver using the PCI generic driver framework and use adding platform devices during xtalk scan. This allows easier sharing bridge driver for other SGI platforms like IP30 (Octane) and IP35 (Origin 3k, Fuel, Tezro). Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> [paul.burton@mips.com: - Leave __phys_to_dma(), __dma_to_phys() & pcibus_to_node() in arch/mips/pci/pci-ip27.c since the motivation for moving them disappeared when the driver stopped being moved to drivers/pci.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
Diffstat (limited to 'arch/mips/pci')
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/pci-ip27.c181
-rw-r--r--arch/mips/pci/pci-xtalk-bridge.c (renamed from arch/mips/pci/ops-bridge.c)258
3 files changed, 206 insertions, 236 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c4f976593061..d6de4cb2e31c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
+obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
#
# These are still pretty much in the old state, watch, go blind.
#
@@ -39,7 +40,7 @@ obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o
+obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 3c177b4d0609..441eb9383b20 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,162 +7,7 @@
* Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/dma-direct.h>
-#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
-#include <asm/paccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Max #PCI busses we can handle; ie, max #PCI bridges.
- */
-#define MAX_PCI_BUSSES 40
-
-/*
- * XXX: No kmalloc available when we do our crosstalk scan,
- * we should try to move it later in the boot process.
- */
-static struct bridge_controller bridges[MAX_PCI_BUSSES];
-
-extern struct pci_ops bridge_pci_ops;
-
-int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
-{
- unsigned long offset = NODE_OFFSET(nasid);
- struct bridge_controller *bc;
- static int num_bridges = 0;
- int slot;
-
- pci_set_flags(PCI_PROBE_ONLY);
-
- printk("a bridge\n");
-
- /* XXX: kludge alert.. */
- if (!num_bridges)
- ioport_resource.end = ~0UL;
-
- bc = &bridges[num_bridges];
-
- bc->pc.pci_ops = &bridge_pci_ops;
- bc->pc.mem_resource = &bc->mem;
- bc->pc.io_resource = &bc->io;
-
- bc->pc.index = num_bridges;
-
- bc->mem.name = "Bridge PCI MEM";
- bc->pc.mem_offset = offset;
- bc->mem.start = 0;
- bc->mem.end = ~0UL;
- bc->mem.flags = IORESOURCE_MEM;
-
- bc->io.name = "Bridge IO MEM";
- bc->pc.io_offset = offset;
- bc->io.start = 0UL;
- bc->io.end = ~0UL;
- bc->io.flags = IORESOURCE_IO;
-
- bc->widget_id = widget_id;
- bc->nasid = nasid;
-
- bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
-
- /*
- * point to this bridge
- */
- bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
-
- /*
- * Clear all pending interrupts.
- */
- bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
-
- /*
- * Until otherwise set up, assume all interrupts are from slot 0
- */
- bridge_write(bc, b_int_device, 0x0);
-
- /*
- * swap pio's to pci mem and io space (big windows)
- */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
- BRIDGE_CTRL_MEM_SWAP);
-#ifdef CONFIG_PAGE_SIZE_4KB
- bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#else /* 16kB or larger */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#endif
-
- /*
- * Hmm... IRIX sets additional bits in the address which
- * are documented as reserved in the bridge docs.
- */
- bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
- bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
- bridge_write(bc, b_dir_map, (masterwid << 20)); /* DMA */
- bridge_write(bc, b_int_enable, 0);
-
- for (slot = 0; slot < 8; slot ++) {
- bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
- bc->pci_int[slot] = -1;
- }
- bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
-
- register_pci_controller(&bc->pc);
-
- num_bridges++;
-
- return 0;
-}
-
-/*
- * All observed requests have pin == 1. We could have a global here, that
- * gets incremented and returned every time - unfortunately, pci_map_irq
- * may be called on the same device over and over, and need to return the
- * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
- *
- * A given PCI device, in general, should be able to intr any of the cpus
- * on any one of the hubs connected to its xbow.
- */
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return 0;
-}
-
-static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
-{
- while (dev->bus->parent) {
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- }
-
- return dev;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct pci_dev *rdev = bridge_root_dev(dev);
- int slot = PCI_SLOT(rdev->devfn);
- int irq;
-
- irq = bc->pci_int[slot];
- if (irq == -1) {
- irq = request_bridge_irq(bc, slot);
- if (irq < 0)
- return irq;
-
- bc->pci_int[slot] = irq;
- }
- dev->irq = irq;
-
- return 0;
-}
dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
@@ -177,29 +22,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
return dma_addr & ~(0xffUL << 56);
}
-/*
- * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
- * to find the slot number in sense of the bridge device register.
- * XXX This also means multiple devices might rely on conflicting bridge
- * settings.
- */
-
-static inline void pci_disable_swapping(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(dev->devfn);
-
- /* Turn off byte swapping */
- bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
- bridge->b_widget.w_tflush; /* Flush */
-}
-
-static void pci_fixup_ioc3(struct pci_dev *d)
-{
- pci_disable_swapping(d);
-}
-
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
@@ -209,6 +31,3 @@ int pcibus_to_node(struct pci_bus *bus)
}
EXPORT_SYMBOL(pcibus_to_node);
#endif /* CONFIG_NUMA */
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
- pci_fixup_ioc3);
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index df95b0da08f2..8f481984ab6e 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -1,17 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999, 2000, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
+#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
-#include <asm/paccess.h>
+#include <linux/smp.h>
+#include <linux/dma-direct.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+
#include <asm/pci/bridge.h>
-#include <asm/sn/arch.h>
+#include <asm/paccess.h>
#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
/*
* Most of the IOC3 PCI config register aren't present
@@ -29,6 +32,20 @@ static u32 emulate_ioc3_cfg(int where, int size)
return 0;
}
+static void bridge_disable_swapping(struct pci_dev *dev)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ int slot = PCI_SLOT(dev->devfn);
+
+ /* Turn off byte swapping */
+ bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+ bridge_read(bc, b_widget.w_tflush); /* Flush */
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ bridge_disable_swapping);
+
+
/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
@@ -39,20 +56,19 @@ static u32 emulate_ioc3_cfg(int where, int size)
* which is used in SGI systems. The IOC3 can only handle 32-bit PCI
* accesses and does only decode parts of it's address space.
*/
-
static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
+ int where, int size, u32 *value)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
struct bridge_regs *bridge = bc->base;
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask;
int res;
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -65,11 +81,11 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
if (size == 1)
- res = get_dbe(*value, (u8 *) addr);
+ res = get_dbe(*value, (u8 *)addr);
else if (size == 2)
- res = get_dbe(*value, (u16 *) addr);
+ res = get_dbe(*value, (u16 *)addr);
else
- res = get_dbe(*value, (u32 *) addr);
+ res = get_dbe(*value, (u32 *)addr);
return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
@@ -84,8 +100,7 @@ is_ioc3:
}
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -96,20 +111,20 @@ is_ioc3:
}
static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
+ int where, int size, u32 *value)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
struct bridge_regs *bridge = bc->base;
int busno = bus->number;
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask;
int res;
bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -119,15 +134,14 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
goto is_ioc3;
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
if (size == 1)
- res = get_dbe(*value, (u8 *) addr);
+ res = get_dbe(*value, (u8 *)addr);
else if (size == 2)
- res = get_dbe(*value, (u16 *) addr);
+ res = get_dbe(*value, (u16 *)addr);
else
- res = get_dbe(*value, (u32 *) addr);
+ res = get_dbe(*value, (u32 *)addr);
return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
@@ -141,10 +155,8 @@ is_ioc3:
return PCIBIOS_SUCCESSFUL;
}
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
-
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -155,7 +167,7 @@ is_ioc3:
}
static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
+ int where, int size, u32 *value)
{
if (!pci_is_root_bus(bus))
return pci_conf1_read_config(bus, devfn, where, size, value);
@@ -170,12 +182,12 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
struct bridge_regs *bridge = bc->base;
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask, smask;
int res;
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -187,13 +199,12 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
- if (size == 1) {
- res = put_dbe(value, (u8 *) addr);
- } else if (size == 2) {
- res = put_dbe(value, (u16 *) addr);
- } else {
- res = put_dbe(value, (u32 *) addr);
- }
+ if (size == 1)
+ res = put_dbe(value, (u8 *)addr);
+ else if (size == 2)
+ res = put_dbe(value, (u16 *)addr);
+ else
+ res = put_dbe(value, (u32 *)addr);
if (res)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -210,7 +221,7 @@ is_ioc3:
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -218,7 +229,7 @@ is_ioc3:
smask = mask << shift;
cf = (cf & ~smask) | ((value & mask) << shift);
- if (put_dbe(cf, (u32 *) addr))
+ if (put_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
@@ -232,13 +243,13 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
int busno = bus->number;
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask, smask;
int res;
bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -250,13 +261,12 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
- if (size == 1) {
- res = put_dbe(value, (u8 *) addr);
- } else if (size == 2) {
- res = put_dbe(value, (u16 *) addr);
- } else {
- res = put_dbe(value, (u32 *) addr);
- }
+ if (size == 1)
+ res = put_dbe(value, (u8 *)addr);
+ else if (size == 2)
+ res = put_dbe(value, (u16 *)addr);
+ else
+ res = put_dbe(value, (u32 *)addr);
if (res)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -272,8 +282,7 @@ is_ioc3:
return PCIBIOS_SUCCESSFUL;
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -281,7 +290,7 @@ is_ioc3:
smask = mask << shift;
cf = (cf & ~smask) | ((value & mask) << shift);
- if (put_dbe(cf, (u32 *) addr))
+ if (put_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
@@ -296,7 +305,148 @@ static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
return pci_conf0_write_config(bus, devfn, where, size, value);
}
-struct pci_ops bridge_pci_ops = {
- .read = pci_read_config,
- .write = pci_write_config,
+static struct pci_ops bridge_pci_ops = {
+ .read = pci_read_config,
+ .write = pci_write_config,
+};
+
+/*
+ * All observed requests have pin == 1. We could have a global here, that
+ * gets incremented and returned every time - unfortunately, pci_map_irq
+ * may be called on the same device over and over, and need to return the
+ * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
+ *
+ * A given PCI device, in general, should be able to intr any of the cpus
+ * on any one of the hubs connected to its xbow.
+ */
+static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ int irq;
+
+ irq = bc->pci_int[slot];
+ if (irq == -1) {
+ irq = request_bridge_irq(bc, slot);
+ if (irq < 0)
+ return irq;
+
+ bc->pci_int[slot] = irq;
+ }
+ return irq;
+}
+
+static int bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bridge_controller *bc;
+ struct pci_host_bridge *host;
+ int slot;
+ int err;
+ struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev);
+
+ pci_set_flags(PCI_PROBE_ONLY);
+
+ host = devm_pci_alloc_host_bridge(dev, sizeof(*bc));
+ if (!host)
+ return -ENOMEM;
+
+ bc = pci_host_bridge_priv(host);
+
+ bc->busn.name = "Bridge PCI busn";
+ bc->busn.start = 0;
+ bc->busn.end = 0xff;
+ bc->busn.flags = IORESOURCE_BUS;
+
+ pci_add_resource_offset(&host->windows, &bd->mem, bd->mem_offset);
+ pci_add_resource_offset(&host->windows, &bd->io, bd->io_offset);
+ pci_add_resource(&host->windows, &bc->busn);
+
+ err = devm_request_pci_bus_resources(dev, &host->windows);
+ if (err < 0) {
+ pci_free_resource_list(&host->windows);
+ return err;
+ }
+
+ bc->nasid = bd->nasid;
+
+ bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR;
+ bc->base = (struct bridge_regs *)bd->bridge_addr;
+ bc->intr_addr = bd->intr_addr;
+
+ /*
+ * Clear all pending interrupts.
+ */
+ bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
+
+ /*
+ * Until otherwise set up, assume all interrupts are from slot 0
+ */
+ bridge_write(bc, b_int_device, 0x0);
+
+ /*
+ * disable swapping for big windows
+ */
+ bridge_clr(bc, b_wid_control,
+ BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP);
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#else /* 16kB or larger */
+ bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#endif
+
+ /*
+ * Hmm... IRIX sets additional bits in the address which
+ * are documented as reserved in the bridge docs.
+ */
+ bridge_write(bc, b_wid_int_upper,
+ ((bc->intr_addr >> 32) & 0xffff) | (bd->masterwid << 16));
+ bridge_write(bc, b_wid_int_lower, bc->intr_addr & 0xffffffff);
+ bridge_write(bc, b_dir_map, (bd->masterwid << 20)); /* DMA */
+ bridge_write(bc, b_int_enable, 0);
+
+ for (slot = 0; slot < 8; slot++) {
+ bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+ bc->pci_int[slot] = -1;
+ }
+ bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
+
+ host->dev.parent = dev;
+ host->sysdata = bc;
+ host->busnr = 0;
+ host->ops = &bridge_pci_ops;
+ host->map_irq = bridge_map_irq;
+ host->swizzle_irq = pci_common_swizzle;
+
+ err = pci_scan_root_bus_bridge(host);
+ if (err < 0)
+ return err;
+
+ pci_bus_claim_resources(host->bus);
+ pci_bus_add_devices(host->bus);
+
+ platform_set_drvdata(pdev, host->bus);
+
+ return 0;
+}
+
+static int bridge_remove(struct platform_device *pdev)
+{
+ struct pci_bus *bus = platform_get_drvdata(pdev);
+
+ pci_lock_rescan_remove();
+ pci_stop_root_bus(bus);
+ pci_remove_root_bus(bus);
+ pci_unlock_rescan_remove();
+
+ return 0;
+}
+
+static struct platform_driver bridge_driver = {
+ .probe = bridge_probe,
+ .remove = bridge_remove,
+ .driver = {
+ .name = "xtalk-bridge",
+ }
};
+
+builtin_platform_driver(bridge_driver);