summaryrefslogtreecommitdiff
path: root/arch/mn10300/mm
diff options
context:
space:
mode:
authorDavid Howells <dhowells@redhat.com>2008-02-08 15:19:31 +0300
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2008-02-08 20:22:30 +0300
commitb920de1b77b72ca9432ac3f97edb26541e65e5dd (patch)
tree40fa9be1470e929c47927dea7eddf184c0204229 /arch/mn10300/mm
parentef3d534754f31fed9c3b976fee1ece1b3bc38282 (diff)
downloadlinux-b920de1b77b72ca9432ac3f97edb26541e65e5dd.tar.xz
mn10300: add the MN10300/AM33 architecture to the kernel
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'arch/mn10300/mm')
-rw-r--r--arch/mn10300/mm/Makefile14
-rw-r--r--arch/mn10300/mm/cache-flush-mn10300.S192
-rw-r--r--arch/mn10300/mm/cache-mn10300.S289
-rw-r--r--arch/mn10300/mm/cache.c121
-rw-r--r--arch/mn10300/mm/dma-alloc.c56
-rw-r--r--arch/mn10300/mm/extable.c26
-rw-r--r--arch/mn10300/mm/fault.c405
-rw-r--r--arch/mn10300/mm/init.c160
-rw-r--r--arch/mn10300/mm/misalignment.c661
-rw-r--r--arch/mn10300/mm/mmu-context.c80
-rw-r--r--arch/mn10300/mm/pgtable.c197
-rw-r--r--arch/mn10300/mm/tlb-mn10300.S207
12 files changed, 2408 insertions, 0 deletions
diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
new file mode 100644
index 000000000000..28b9d983db0c
--- /dev/null
+++ b/arch/mn10300/mm/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the MN10300-specific memory management code
+#
+
+obj-y := \
+ init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
+ misalignment.o dma-alloc.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-y += cache.o cache-mn10300.o
+ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
+obj-y += cache-flush-mn10300.o
+endif
+endif
diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S
new file mode 100644
index 000000000000..c8ed1cbac107
--- /dev/null
+++ b/arch/mn10300/mm/cache-flush-mn10300.S
@@ -0,0 +1,192 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+ .am33_2
+ .globl mn10300_dcache_flush
+ .globl mn10300_dcache_flush_page
+ .globl mn10300_dcache_flush_range
+ .globl mn10300_dcache_flush_range2
+ .globl mn10300_dcache_flush_inv
+ .globl mn10300_dcache_flush_inv_page
+ .globl mn10300_dcache_flush_inv_range
+ .globl mn10300_dcache_flush_inv_range2
+
+###############################################################################
+#
+# void mn10300_dcache_flush(void)
+# Flush the entire data cache back to RAM
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_end
+
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+mn10300_dcache_flush_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_page(unsigned start)
+# void mn10300_dcache_flush_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
+# Flush a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_range2:
+ add d0,d1
+mn10300_dcache_flush_range:
+ movm [d2,d3],(sp)
+
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_range_end
+
+ # round start addr down
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush all instances of an address from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ or L1_CACHE_TAG_VALID,a1 # retain valid entries in the
+ # cache
+
+mn10300_dcache_flush_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_range_loop
+
+mn10300_dcache_flush_range_end:
+ ret [d2,d3],8
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv(void)
+# Flush the entire data cache and invalidate all entries
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_inv_end
+
+ # hit each line in the dcache with an unconditional purge
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_inv_loop:
+ mov (a1),d0 # unconditional purge
+
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_inv_loop
+
+mn10300_dcache_flush_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv_page(unsigned start)
+# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
+# Flush and invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_inv_range2:
+ add d0,d1
+mn10300_dcache_flush_inv_range:
+ movm [d2,d3],(sp)
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush and invalidate all instances of an address
+ # from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+mn10300_dcache_flush_inv_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # in all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_inv_range_loop
+
+mn10300_dcache_flush_inv_range_end:
+ ret [d2,d3],8
diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S
new file mode 100644
index 000000000000..e839d0aedd69
--- /dev/null
+++ b/arch/mn10300/mm/cache-mn10300.S
@@ -0,0 +1,289 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define mn10300_dcache_inv_range_intr_interval \
+ +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
+
+#if mn10300_dcache_inv_range_intr_interval > 0xff
+#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
+#endif
+
+ .am33_2
+
+ .globl mn10300_icache_inv
+ .globl mn10300_dcache_inv
+ .globl mn10300_dcache_inv_range
+ .globl mn10300_dcache_inv_range2
+ .globl mn10300_dcache_inv_page
+
+###############################################################################
+#
+# void mn10300_icache_inv(void)
+# Invalidate the entire icache
+#
+###############################################################################
+ ALIGN
+mn10300_icache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_icache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_ICINV,d0
+ or CHCTR_ICEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_icache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv(void)
+# Invalidate the entire dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the dcache
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_DCINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_DCINV,d0
+ or CHCTR_DCEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_dcache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
+# void mn10300_dcache_inv_page(unsigned start)
+# Invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_inv_range2:
+ add d0,d1
+mn10300_dcache_inv_range:
+ movm [d2,d3,a2],(sp)
+ mov CHCTR,a2
+
+ movhu (a2),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ clr d2 # we're going to clear tag ram
+ # entries
+
+ # read the tags from the tag RAM, and if they indicate a valid dirty
+ # cache line then invalidate that line
+ mov DCACHE_TAG(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache tag RAM
+ # access address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
+
+mn10300_dcache_inv_range_outer_loop:
+ # disable interrupts
+ mov epsw,d3
+ and ~EPSW_IE,epsw
+ nop # note that reading CHCTR and
+ # AND'ing D0 occupy two delay
+ # slots after disabling
+ # interrupts
+
+ # disable the dcache
+ movhu (a2),d0
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a2)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+mn10300_dcache_inv_range_loop:
+
+ # process the way 0 slot
+ mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_0:
+
+ # process the way 1 slot
+ mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_1:
+
+ # process the way 2 slot
+ mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_2:
+
+ # process the way 3 slot
+ mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_3:
+
+ # approx every N steps we re-enable the cache and see if there are any
+ # interrupts to be processed
+ # we also break out if we've reached the end of the loop
+ # (the bottom nibble of the count is zero in both cases)
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ btst mn10300_dcache_inv_range_intr_interval,d1
+ bne mn10300_dcache_inv_range_loop
+
+ # wait for the cache to finish what it's doing
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_DCEN,d0
+ movhu d0,(a2)
+ movhu (a2),d0
+
+ # re-enable interrupts
+ # - we don't bother with delay NOPs as we'll have enough instructions
+ # before we disable interrupts again to give the interrupts a chance
+ # to happen
+ mov d3,epsw
+
+ # go around again if the counter hasn't yet reached zero
+ add 0,d1
+ bne mn10300_dcache_inv_range_outer_loop
+
+mn10300_dcache_inv_range_end:
+ ret [d2,d3,a2],12
diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c
new file mode 100644
index 000000000000..1b76719ec1c3
--- /dev/null
+++ b/arch/mn10300/mm/cache.c
@@ -0,0 +1,121 @@
+/* MN10300 Cache flushing routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+EXPORT_SYMBOL(mn10300_icache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_inv_page);
+
+#ifdef CONFIG_MN10300_CACHE_WBACK
+EXPORT_SYMBOL(mn10300_dcache_flush);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_page);
+EXPORT_SYMBOL(mn10300_dcache_flush_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_page);
+#endif
+
+/*
+ * write a page back from the dcache and invalidate the icache so that we can
+ * run code from it that we've just written into it
+ */
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ mn10300_dcache_flush_page(page_to_phys(page));
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_page);
+
+/*
+ * write some code we've just written back from the dcache and invalidate the
+ * icache so that we can run that code
+ */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+#ifdef CONFIG_MN10300_CACHE_WBACK
+ unsigned long addr, size, off;
+ struct page *page;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *ppte, pte;
+
+ for (; start < end; start += size) {
+ /* work out how much of the page to flush */
+ off = start & (PAGE_SIZE - 1);
+
+ size = end - start;
+ if (size > PAGE_SIZE - off)
+ size = PAGE_SIZE - off;
+
+ /* get the physical address the page is mapped to from the page
+ * tables */
+ pgd = pgd_offset(current->mm, start);
+ if (!pgd || !pgd_val(*pgd))
+ continue;
+
+ pud = pud_offset(pgd, start);
+ if (!pud || !pud_val(*pud))
+ continue;
+
+ pmd = pmd_offset(pud, start);
+ if (!pmd || !pmd_val(*pmd))
+ continue;
+
+ ppte = pte_offset_map(pmd, start);
+ if (!ppte)
+ continue;
+ pte = *ppte;
+ pte_unmap(ppte);
+
+ if (pte_none(pte))
+ continue;
+
+ page = pte_page(pte);
+ if (!page)
+ continue;
+
+ addr = page_to_phys(page);
+
+ /* flush the dcache and invalidate the icache coverage on that
+ * region */
+ mn10300_dcache_flush_range2(addr + off, size);
+ }
+#endif
+
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+ if (end < start)
+ return -EINVAL;
+
+ flush_icache_range(start, end);
+ return 0;
+}
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
new file mode 100644
index 000000000000..f3649d8f50e3
--- /dev/null
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -0,0 +1,56 @@
+/* MN10300 Dynamic DMA mapping support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-dma.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int gfp)
+{
+ unsigned long addr;
+ void *ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+ gfp |= GFP_DMA;
+
+ addr = __get_free_pages(gfp, get_order(size));
+ if (!addr)
+ return NULL;
+
+ /* map the coherent memory through the uncached memory window */
+ ret = (void *) (addr | 0x20000000);
+
+ /* fill the memory with obvious rubbish */
+ memset((void *) addr, 0xfb, size);
+
+ /* write back and evict all cache lines covering this region */
+ mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+
+ *dma_handle = virt_to_bus((void *) addr);
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+
+ free_pages(addr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/mn10300/mm/extable.c b/arch/mn10300/mm/extable.c
new file mode 100644
index 000000000000..25e5485ab87d
--- /dev/null
+++ b/arch/mn10300/mm/extable.c
@@ -0,0 +1,26 @@
+/* MN10300 In-kernel exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
new file mode 100644
index 000000000000..78f092ca0316
--- /dev/null
+++ b/arch/mn10300/mm/fault.c
@@ -0,0 +1,405 @@
+/* MN10300 MMU Fault handler
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/hardirq.h>
+#include <asm/gdb-stub.h>
+#include <asm/cpu-regs.h>
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+ if (yes) {
+ oops_in_progress = 1;
+#ifdef CONFIG_SMP
+ /* Many serial drivers do __global_cli() */
+ global_irq_lock = 0;
+#endif
+ } else {
+ int loglevel_save = console_loglevel;
+#ifdef CONFIG_VT
+ unblank_screen();
+#endif
+ oops_in_progress = 0;
+ /*
+ * OK, the message is on the console. Now we call printk()
+ * without oops_in_progress set so that printk will give klogd
+ * a poke. Hold onto your hats...
+ */
+ console_loglevel = 15; /* NMI oopser may have shut the console
+ * up */
+ printk(" ");
+ console_loglevel = loglevel_save;
+ }
+}
+
+void do_BUG(const char *file, int line)
+{
+ bust_spinlocks(1);
+ printk(KERN_EMERG "------------[ cut here ]------------\n");
+ printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+}
+
+#if 0
+static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = pgdir + __pgd_offset(address);
+ printk(KERN_DEBUG "pgd entry %p: %016Lx\n",
+ pgd, (long long) pgd_val(*pgd));
+
+ if (!pgd_present(*pgd)) {
+ printk(KERN_DEBUG "... pgd not present!\n");
+ return;
+ }
+ pmd = pmd_offset(pgd, address);
+ printk(KERN_DEBUG "pmd entry %p: %016Lx\n",
+ pmd, (long long)pmd_val(*pmd));
+
+ if (!pmd_present(*pmd)) {
+ printk(KERN_DEBUG "... pmd not present!\n");
+ return;
+ }
+ pte = pte_offset(pmd, address);
+ printk(KERN_DEBUG "pte entry %p: %016Lx\n",
+ pte, (long long) pte_val(*pte));
+
+ if (!pte_present(*pte))
+ printk(KERN_DEBUG "... pte not present!\n");
+}
+#endif
+
+asmlinkage void monitor_signal(struct pt_regs *);
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * fault_code:
+ * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate
+ * - MSW: 0 if data access, 1 if instruction access
+ * - bit 0: TLB miss flag
+ * - bit 1: initial write
+ * - bit 2: page invalid
+ * - bit 3: protection violation
+ * - bit 4: accessor (0=user 1=kernel)
+ * - bit 5: 0=read 1=write
+ * - bit 6-8: page protection spec
+ * - bit 9: illegal address
+ * - bit 16: 0=data 1=ins
+ *
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
+ unsigned long address)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long page;
+ siginfo_t info;
+ int write, fault;
+
+#ifdef CONFIG_GDBSTUB
+ /* handle GDB stub causing a fault */
+ if (gdbstub_busy) {
+ gdbstub_exception(regs, TBR & TBR_INT_CODE);
+ return;
+ }
+#endif
+
+#if 0
+ printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n",
+ regs,
+ fault_code & 0x10000 ? "ins" : "data",
+ fault_code & 0xffff, address);
+#endif
+
+ tsk = current;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was a page not present (invalid) error
+ */
+ if (address >= VMALLOC_START && address < VMALLOC_END &&
+ (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR &&
+ (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL
+ )
+ goto vmalloc_fault;
+
+ mm = tsk->mm;
+ info.si_code = SEGV_MAPERR;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ down_read(&mm->mmap_sem);
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ /* accessing the stack below the stack pointer is always a
+ * bug */
+ if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) {
+#if 0
+ printk(KERN_WARNING
+ "[%d] ### Access below stack @%lx (sp=%lx)\n",
+ current->pid, address, regs->sp);
+ printk(KERN_WARNING
+ "vma [%08x - %08x]\n",
+ vma->vm_start, vma->vm_end);
+ show_registers(regs);
+ printk(KERN_WARNING
+ "[%d] ### Code: [%08lx]"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ current->pid,
+ regs->pc,
+ ((u8 *) regs->pc)[0],
+ ((u8 *) regs->pc)[1],
+ ((u8 *) regs->pc)[2],
+ ((u8 *) regs->pc)[3],
+ ((u8 *) regs->pc)[4],
+ ((u8 *) regs->pc)[5],
+ ((u8 *) regs->pc)[6],
+ ((u8 *) regs->pc)[7]
+ );
+#endif
+ goto bad_area;
+ }
+ }
+
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ info.si_code = SEGV_ACCERR;
+ write = 0;
+ switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) {
+ default: /* 3: write, present */
+ case MMUFCR_xFC_TYPE_WRITE:
+#ifdef TEST_VERIFY_AREA
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc);
+#endif
+ /* write to absent page */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE:
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ write++;
+ break;
+
+ /* read from protected page */
+ case MMUFCR_xFC_TYPE_READ:
+ goto bad_area;
+
+ /* read from absent page present */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ:
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ break;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ current->maj_flt++;
+ else
+ current->min_flt++;
+
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /* User mode accesses just cause a SIGSEGV */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ /* info.si_code has been set above */
+ info.si_addr = (void *)address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+no_context:
+ monitor_signal(regs);
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ bust_spinlocks(1);
+
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT
+ "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT
+ "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n", address);
+ printk(" printing pc:\n");
+ printk(KERN_ALERT "%08lx\n", regs->pc);
+
+#ifdef CONFIG_GDBSTUB
+ gdbstub_intercept(
+ regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
+#endif
+
+ page = PTBR;
+ page = ((unsigned long *) __va(page))[address >> 22];
+ printk(KERN_ALERT "*pde = %08lx\n", page);
+ if (page & 1) {
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+ printk(KERN_ALERT "*pte = %08lx\n", page);
+ }
+
+ die("Oops", regs, fault_code);
+ do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+ printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
+ do_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void *)address;
+ force_sig_info(SIGBUS, &info, tsk);
+
+ /* Kernel mode? Handle exceptions or die */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ goto no_context;
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "tsk" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ int index = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ goto no_context;
+
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ goto no_context;
+
+ pgd = (pgd_t *) PTBR + index;
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ set_pmd(pmd, *pmd_k);
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+ return;
+ }
+}
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
new file mode 100644
index 000000000000..8c5d88c7b90a
--- /dev/null
+++ b/arch/mn10300/mm/init.c
@@ -0,0 +1,160 @@
+/* MN10300 Memory management initialisation
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/tlb.h>
+#include <asm/sections.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long highstart_pfn, highend_pfn;
+
+/*
+ * set up paging
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = {0,};
+ pte_t *ppte;
+ int loop;
+
+ /* main kernel space -> RAM mapping is handled as 1:1 transparent by
+ * the MMU */
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+ memset(kernel_vmalloc_ptes, 0, sizeof(kernel_vmalloc_ptes));
+
+ /* load the VMALLOC area PTE table addresses into the kernel PGD */
+ ppte = kernel_vmalloc_ptes;
+ for (loop = VMALLOC_START / (PAGE_SIZE * PTRS_PER_PTE);
+ loop < VMALLOC_END / (PAGE_SIZE * PTRS_PER_PTE);
+ loop++
+ ) {
+ set_pgd(swapper_pg_dir + loop, __pgd(__pa(ppte) | _PAGE_TABLE));
+ ppte += PAGE_SIZE / sizeof(pte_t);
+ }
+
+ /* declare the sizes of the RAM zones (only use the normal zone) */
+ zones_size[ZONE_NORMAL] =
+ (contig_page_data.bdata->node_low_pfn) -
+ (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+
+ /* pass the memory from the bootmem allocator to the main allocator */
+ free_area_init(zones_size);
+
+ __flush_tlb_all();
+}
+
+/*
+ * transfer all the memory from the bootmem allocator to the runtime allocator
+ */
+void __init mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+ int tmp;
+
+ if (!mem_map)
+ BUG();
+
+#define START_PFN (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn)
+
+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
+ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
+
+ /* clear the zero-page */
+ memset(empty_zero_page, 0, PAGE_SIZE);
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ reservedpages = 0;
+ for (tmp = 0; tmp < num_physpages; tmp++)
+ if (PageReserved(&mem_map[tmp]))
+ reservedpages++;
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_stext;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ printk(KERN_INFO
+ "Memory: %luk/%luk available"
+ " (%dk kernel code, %dk reserved, %dk data, %dk init,"
+ " %ldk highmem)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+ max_mapnr << (PAGE_SHIFT - 10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT - 10),
+ datasize >> 10,
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
+ );
+}
+
+/*
+ *
+ */
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr;
+
+ for (addr = begin; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *) addr, 0xcc, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+/*
+ * recycle memory containing stuff only required for initialisation
+ */
+void free_initmem(void)
+{
+ free_init_pages("unused kernel memory",
+ (unsigned long) &__init_begin,
+ (unsigned long) &__init_end);
+}
+
+/*
+ * dispose of the memory on which the initial ramdisk resided
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_init_pages("initrd memory", start, end);
+}
+#endif
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
new file mode 100644
index 000000000000..32aa89dc3848
--- /dev/null
+++ b/arch/mn10300/mm/misalignment.c
@@ -0,0 +1,661 @@
+/* MN10300 Misalignment fixup handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/asm-offsets.h>
+
+#if 0
+#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__)
+#else
+#define kdebug(FMT, ...) do {} while (0)
+#endif
+
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc);
+
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register);
+
+static inline unsigned int_log2(unsigned x)
+{
+ unsigned y;
+ asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0));
+ return y;
+}
+#define log2(x) int_log2(x)
+
+static const unsigned Dreg_index[] = {
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+static const unsigned Areg_index[] = {
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2
+};
+
+static const unsigned Rreg_index[] = {
+ REG_E0 >> 2, REG_E1 >> 2, REG_E2 >> 2, REG_E3 >> 2,
+ REG_E4 >> 2, REG_E5 >> 2, REG_E6 >> 2, REG_E7 >> 2,
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2,
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+enum format_id {
+ FMT_S0,
+ FMT_S1,
+ FMT_S2,
+ FMT_S4,
+ FMT_D0,
+ FMT_D1,
+ FMT_D2,
+ FMT_D4,
+ FMT_D6,
+ FMT_D7,
+ FMT_D8,
+ FMT_D9,
+};
+
+struct {
+ u_int8_t opsz, dispsz;
+} format_tbl[16] = {
+ [FMT_S0] = { 8, 0 },
+ [FMT_S1] = { 8, 8 },
+ [FMT_S2] = { 8, 16 },
+ [FMT_S4] = { 8, 32 },
+ [FMT_D0] = { 16, 0 },
+ [FMT_D1] = { 16, 8 },
+ [FMT_D2] = { 16, 16 },
+ [FMT_D4] = { 16, 32 },
+ [FMT_D6] = { 24, 0 },
+ [FMT_D7] = { 24, 8 },
+ [FMT_D8] = { 24, 24 },
+ [FMT_D9] = { 24, 32 },
+};
+
+enum value_id {
+ DM0, /* data reg in opcode in bits 0-1 */
+ DM1, /* data reg in opcode in bits 2-3 */
+ DM2, /* data reg in opcode in bits 4-5 */
+ AM0, /* addr reg in opcode in bits 0-1 */
+ AM1, /* addr reg in opcode in bits 2-3 */
+ AM2, /* addr reg in opcode in bits 4-5 */
+ RM0, /* reg in opcode in bits 0-3 */
+ RM1, /* reg in opcode in bits 2-5 */
+ RM2, /* reg in opcode in bits 4-7 */
+ RM4, /* reg in opcode in bits 8-11 */
+ RM6, /* reg in opcode in bits 12-15 */
+
+ RD0, /* reg in displacement in bits 0-3 */
+ RD2, /* reg in displacement in bits 4-7 */
+
+ SP, /* stack pointer */
+
+ SD8, /* 8-bit signed displacement */
+ SD16, /* 16-bit signed displacement */
+ SD24, /* 24-bit signed displacement */
+ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */
+ SIMM8, /* 8-bit signed immediate */
+ IMM24, /* 24-bit unsigned immediate */
+ IMM32, /* 32-bit unsigned immediate */
+ IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */
+
+ DN0 = DM0,
+ DN1 = DM1,
+ DN2 = DM2,
+ AN0 = AM0,
+ AN1 = AM1,
+ AN2 = AM2,
+ RN0 = RM0,
+ RN1 = RM1,
+ RN2 = RM2,
+ RN4 = RM4,
+ RN6 = RM6,
+ DI = DM1,
+ RI = RM2,
+
+};
+
+struct mn10300_opcode {
+ const char *name;
+ u_int32_t opcode;
+ u_int32_t opmask;
+ unsigned exclusion;
+
+ enum format_id format;
+
+ unsigned cpu_mask;
+#define AM33 330
+
+ unsigned params[2];
+#define MEM(ADDR) (0x80000000 | (ADDR))
+#define MEM2(ADDR1, ADDR2) (0x80000000 | (ADDR1) << 8 | (ADDR2))
+#define MEMINC(ADDR) (0x81000000 | (ADDR))
+#define MEMINC2(ADDR, INC) (0x81000000 | (ADDR) << 8 | (INC))
+};
+
+/* LIBOPCODES EXCERPT
+ Assemble Matsushita MN10300 instructions.
+ Copyright 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public Licence as published by
+ the Free Software Foundation; either version 2 of the Licence, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public Licence for more details.
+
+ You should have received a copy of the GNU General Public Licence
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+static const struct mn10300_opcode mn10300_opcodes[] = {
+{ "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}},
+{ "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}},
+{ "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}},
+{ "mov", 0xf010, 0xfff0, 0, FMT_D0, 0, {AM1, MEM(AN0)}},
+{ "mov", 0xf300, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "mov", 0xf340, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "mov", 0xf380, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), AN2}},
+{ "mov", 0xf3c0, 0xffc0, 0, FMT_D0, 0, {AM2, MEM2(DI, AN0)}},
+{ "mov", 0xf80000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}},
+{ "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}},
+{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}},
+{ "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "mov", 0xf97a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "mov", 0xfa000000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}},
+{ "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}},
+{ "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+
+{ "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}},
+{ "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}},
+{ "movhu", 0xf480, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+{ 0, 0, 0, 0, 0, 0, {0}},
+};
+
+/*
+ * fix up misalignment problems where possible
+ */
+asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code)
+{
+ const struct exception_table_entry *fixup;
+ const struct mn10300_opcode *pop;
+ unsigned long *registers = (unsigned long *) regs;
+ unsigned long data, *store, *postinc;
+ mm_segment_t seg;
+ siginfo_t info;
+ uint32_t opcode, disp, noc, xo, xm;
+ uint8_t *pc, byte;
+ void *address;
+ unsigned tmp, npop;
+
+ kdebug("MISALIGN at %lx\n", regs->pc);
+
+ if (in_interrupt())
+ die("Misalignment trap in interrupt context", regs, code);
+
+ if (regs->epsw & EPSW_IE)
+ asm volatile("or %0,epsw" : : "i"(EPSW_IE));
+
+ seg = get_fs();
+ set_fs(KERNEL_DS);
+
+ fixup = search_exception_tables(regs->pc);
+
+ /* first thing to do is to match the opcode */
+ pc = (u_int8_t *) regs->pc;
+
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = byte;
+ noc = 8;
+
+ for (pop = mn10300_opcodes; pop->name; pop++) {
+ npop = log2(pop->opcode | pop->opmask);
+ if (npop <= 0 || npop > 31)
+ continue;
+ npop = (npop + 8) & ~7;
+
+ got_more_bits:
+ if (npop == noc) {
+ if ((opcode & pop->opmask) == pop->opcode)
+ goto found_opcode;
+ } else if (npop > noc) {
+ xo = pop->opcode >> (npop - noc);
+ xm = pop->opmask >> (npop - noc);
+
+ if ((opcode & xm) != xo)
+ continue;
+
+ /* we've got a partial match (an exact match on the
+ * first N bytes), so we need to get some more data */
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = opcode << 8 | byte;
+ noc += 8;
+ goto got_more_bits;
+ } else {
+ /* there's already been a partial match as long as the
+ * complete match we're now considering, so this one
+ * should't match */
+ continue;
+ }
+ }
+
+ /* didn't manage to find a fixup */
+ if (!user_mode(regs))
+ printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n",
+ regs->pc, opcode);
+
+failed:
+ set_fs(seg);
+ if (die_if_no_fixup("misalignment error", regs, code))
+ return;
+
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRALN;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGBUS, &info, current);
+ return;
+
+ /* error reading opcodes */
+fetch_error:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %p: fault whilst reading instruction data\n",
+ pc);
+ goto failed;
+
+bad_addr_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported addressing mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+bad_reg_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported register mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+unsupported_instruction:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported instruction %x (%s)\n",
+ regs->pc, opcode, pop->name);
+ goto failed;
+
+transfer_failed:
+ set_fs(seg);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+ if (die_if_no_fixup("misalignment fixup", regs, code))
+ return;
+
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = 0;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGSEGV, &info, current);
+ return;
+
+ /* we matched the opcode */
+found_opcode:
+ kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n",
+ regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]);
+
+ tmp = format_tbl[pop->format].opsz;
+ if (tmp > noc)
+ BUG(); /* match was less complete than it ought to have been */
+
+ if (tmp < noc) {
+ tmp = noc - tmp;
+ opcode >>= tmp;
+ pc -= tmp >> 3;
+ }
+
+ /* grab the extra displacement (note it's LSB first) */
+ disp = 0;
+ tmp = format_tbl[pop->format].dispsz >> 3;
+ while (tmp > 0) {
+ tmp--;
+ disp <<= 8;
+
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ disp |= byte;
+ }
+
+ set_fs(KERNEL_XDS);
+ if (fixup || regs->epsw & EPSW_nSL)
+ set_fs(seg);
+
+ tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000;
+ if (!tmp) {
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx:"
+ " insn not move to/from memory %x\n",
+ regs->pc, opcode);
+ goto failed;
+ }
+
+ if (pop->params[0] & 0x80000000) {
+ /* move memory to register */
+ if (!misalignment_addr(registers, pop->params[0], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ if (!misalignment_reg(registers, pop->params[1], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov (%p),DARn\n", address);
+ if (copy_from_user(&data, (void *) address, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu (%p),DARn\n", address);
+ data = 0;
+ if (copy_from_user(&data, (void *) address, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+
+ *store = data;
+ } else {
+ /* move register to memory */
+ if (!misalignment_reg(registers, pop->params[0], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (!misalignment_addr(registers, pop->params[1], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ data = *store;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov %lx,(%p)\n", data, address);
+ if (copy_to_user((void *) address, &data, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu %hx,(%p)\n",
+ (uint16_t) data, address);
+ if (copy_to_user((void *) address, &data, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+ }
+
+ tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz;
+ regs->pc += tmp >> 3;
+
+ set_fs(seg);
+ return;
+}
+
+/*
+ * determine the address that was being accessed
+ */
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc)
+{
+ unsigned long *postinc = NULL, address = 0, tmp;
+
+ params &= 0x7fffffff;
+
+ do {
+ switch (params & 0xff) {
+ case DM0:
+ postinc = &registers[Dreg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case DM1:
+ postinc = &registers[Dreg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case DM2:
+ postinc = &registers[Dreg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case AM0:
+ postinc = &registers[Areg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case AM1:
+ postinc = &registers[Areg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case AM2:
+ postinc = &registers[Areg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case RM0:
+ postinc = &registers[Rreg_index[opcode & 0x0f]];
+ address += *postinc;
+ break;
+ case RM1:
+ postinc = &registers[Rreg_index[opcode >> 2 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM2:
+ postinc = &registers[Rreg_index[opcode >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM4:
+ postinc = &registers[Rreg_index[opcode >> 8 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM6:
+ postinc = &registers[Rreg_index[opcode >> 12 & 0x0f]];
+ address += *postinc;
+ break;
+ case RD0:
+ postinc = &registers[Rreg_index[disp & 0x0f]];
+ address += *postinc;
+ break;
+ case RD2:
+ postinc = &registers[Rreg_index[disp >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+
+ case SD8:
+ case SIMM8:
+ address += (int32_t) (int8_t) (disp & 0xff);
+ break;
+ case SD16:
+ address += (int32_t) (int16_t) (disp & 0xffff);
+ break;
+ case SD24:
+ tmp = disp << 8;
+ asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case SIMM4_2:
+ tmp = opcode >> 4 & 0x0f;
+ tmp <<= 28;
+ asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case IMM24:
+ address += disp & 0x00ffffff;
+ break;
+ case IMM32:
+ case IMM32_HIGH8:
+ address += disp;
+ break;
+ default:
+ return 0;
+ }
+ } while ((params >>= 8));
+
+ *_address = (void *) address;
+ *_postinc = postinc;
+ return 1;
+}
+
+/*
+ * determine the register that is acting as source/dest
+ */
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register)
+{
+ params &= 0x7fffffff;
+
+ if (params & 0xffffff00)
+ return 0;
+
+ switch (params & 0xff) {
+ case DM0:
+ *_register = &registers[Dreg_index[opcode & 0x03]];
+ break;
+ case DM1:
+ *_register = &registers[Dreg_index[opcode >> 2 & 0x03]];
+ break;
+ case DM2:
+ *_register = &registers[Dreg_index[opcode >> 4 & 0x03]];
+ break;
+ case AM0:
+ *_register = &registers[Areg_index[opcode & 0x03]];
+ break;
+ case AM1:
+ *_register = &registers[Areg_index[opcode >> 2 & 0x03]];
+ break;
+ case AM2:
+ *_register = &registers[Areg_index[opcode >> 4 & 0x03]];
+ break;
+ case RM0:
+ *_register = &registers[Rreg_index[opcode & 0x0f]];
+ break;
+ case RM1:
+ *_register = &registers[Rreg_index[opcode >> 2 & 0x0f]];
+ break;
+ case RM2:
+ *_register = &registers[Rreg_index[opcode >> 4 & 0x0f]];
+ break;
+ case RM4:
+ *_register = &registers[Rreg_index[opcode >> 8 & 0x0f]];
+ break;
+ case RM6:
+ *_register = &registers[Rreg_index[opcode >> 12 & 0x0f]];
+ break;
+ case RD0:
+ *_register = &registers[Rreg_index[disp & 0x0f]];
+ break;
+ case RD2:
+ *_register = &registers[Rreg_index[disp >> 4 & 0x0f]];
+ break;
+ case SP:
+ *_register = &registers[REG_SP >> 2];
+ break;
+
+ default:
+ return 0;
+ }
+
+ return 1;
+}
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
new file mode 100644
index 000000000000..31c9d27a75ae
--- /dev/null
+++ b/arch/mn10300/mm/mmu-context.c
@@ -0,0 +1,80 @@
+/* MN10300 MMU context allocation and management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+/*
+ * list of the MMU contexts last allocated on each CPU
+ */
+unsigned long mmu_context_cache[NR_CPUS] = {
+ [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1,
+};
+
+/*
+ * flush the specified TLB entry
+ */
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ unsigned long pteu, cnx, flags;
+
+ addr &= PAGE_MASK;
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ IPTEU = pteu;
+ DPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = 0;
+ if (DPTEL & xPTEL_V)
+ DPTEL = 0;
+ }
+
+ local_irq_restore(flags);
+}
+
+/*
+ * preemptively set a TLB entry
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long pteu, ptel, cnx, flags;
+
+ addr &= PAGE_MASK;
+ ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ if (!(pte_val(pte) & _PAGE_NX)) {
+ IPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = ptel;
+ }
+ DPTEU = pteu;
+ if (DPTEL & xPTEL_V)
+ DPTEL = ptel;
+ }
+
+ local_irq_restore(flags);
+}
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
new file mode 100644
index 000000000000..a477038752ba
--- /dev/null
+++ b/arch/mn10300/mm/pgtable.c
@@ -0,0 +1,197 @@
+/* MN10300 Page table management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/quicklist.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+
+ int cached = 0;
+ printk(KERN_INFO "Mem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map + i))
+ reserved++;
+ else if (PageSwapCache(mem_map + i))
+ cached++;
+ else if (!page_count(mem_map + i))
+ free++;
+ else
+ shared += page_count(mem_map + i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d free pages\n", free);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * Associate a large virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated. Assumes PAE mode.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: vaddr misaligned\n");
+ return; /* BUG(); */
+ }
+ if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: pfn misaligned\n");
+ return; /* BUG(); */
+ }
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ printk(KERN_ERR "set_pmd_pfn: pgd_none\n");
+ return; /* BUG(); */
+ }
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ set_pmd(pmd, pfn_pmd(pfn, flags));
+ /*
+ * It's enough to flush this one mapping.
+ * (PGE mappings get flushed as well)
+ */
+ __flush_tlb_one(vaddr);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+ if (pte)
+ clear_page(pte);
+ return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0);
+#else
+ pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+#endif
+ if (pte)
+ clear_highpage(pte);
+ return pte;
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * If the locking proves to be non-performant, a ticketing scheme with
+ * checks at dup_mmap(), exec(), and other mmlist addition points
+ * could be used. The locking scheme was chosen on the basis of
+ * manfred's recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+ struct page *page = virt_to_page(pgd);
+ page->index = (unsigned long) pgd_list;
+ if (pgd_list)
+ set_page_private(pgd_list, (unsigned long) &page->index);
+ pgd_list = page;
+ set_page_private(page, (unsigned long) &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+ struct page *next, **pprev, *page = virt_to_page(pgd);
+ next = (struct page *) page->index;
+ pprev = (struct page **) page_private(page);
+ *pprev = next;
+ if (next)
+ set_page_private(next, (unsigned long) pprev);
+}
+
+void pgd_ctor(void *pgd)
+{
+ unsigned long flags;
+
+ if (PTRS_PER_PMD == 1)
+ spin_lock_irqsave(&pgd_lock, flags);
+
+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+ if (PTRS_PER_PMD > 1)
+ return;
+
+ pgd_list_add(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd)
+{
+ unsigned long flags; /* can be called from interrupt context */
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ pgd_list_del(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ quicklist_free(0, pgd_dtor, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+}
+
+void check_pgt_cache(void)
+{
+ quicklist_trim(0, pgd_dtor, 25, 16);
+}
diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S
new file mode 100644
index 000000000000..789208094e98
--- /dev/null
+++ b/arch/mn10300/mm/tlb-mn10300.S
@@ -0,0 +1,207 @@
+###############################################################################
+#
+# TLB loading functions
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/frame.inc>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+###############################################################################
+#
+# Instruction TLB Miss handler entry point
+#
+###############################################################################
+ .type itlb_miss,@function
+ENTRY(itlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (IPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq itlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq itlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+itlb_miss_set:
+ mov d2,(IPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+itlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra itlb_miss_set
+
+ .size itlb_miss, . - itlb_miss
+
+###############################################################################
+#
+# Data TLB Miss handler entry point
+#
+###############################################################################
+ .type dtlb_miss,@function
+ENTRY(dtlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (DPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq dtlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq dtlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+dtlb_miss_set:
+ mov d2,(DPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+dtlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra dtlb_miss_set
+ .size dtlb_miss, . - dtlb_miss
+
+###############################################################################
+#
+# Instruction TLB Address Error handler entry point
+#
+###############################################################################
+ .type itlb_aerror,@function
+ENTRY(itlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_IFC),d1
+ or 0x00010000,d1 # it's an instruction fetch
+
+ # determine the page address
+ mov (IPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(IPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size itlb_aerror, . - itlb_aerror
+
+###############################################################################
+#
+# Data TLB Address Error handler entry point
+#
+###############################################################################
+ .type dtlb_aerror,@function
+ENTRY(dtlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ mov d1,(sp)
+
+ movhu (MMUFCR_DFC),d1 # is it the initial valid write
+ # to this page?
+ and MMUFCR_xFC_INITWR,d1
+ beq dtlb_pagefault # jump if not
+
+ mov (DPTEL),d1 # set the dirty bit
+ # (don't replace with BSET!)
+ or _PAGE_DIRTY,d1
+ mov d1,(DPTEL)
+ mov (sp),d1
+ add 4,sp
+ rti
+
+ ALIGN
+dtlb_pagefault:
+ mov (sp),d1
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_DFC),d1
+
+ # determine the page address
+ mov (DPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(DPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size dtlb_aerror, . - dtlb_aerror