summaryrefslogtreecommitdiff
path: root/drivers/char/nsc_gpio.c
diff options
context:
space:
mode:
authorJim Cromie <jim.cromie@gmail.com>2006-06-27 13:54:26 +0400
committerLinus Torvalds <torvalds@g5.osdl.org>2006-06-28 04:32:43 +0400
commit23916a8e3d8f41aa91474e834ac99808b197c39e (patch)
treed5d08172500e1b7bca0317bf29f6dd917b034200 /drivers/char/nsc_gpio.c
parentec312310e43acd5bb8b49314c6d472bb60d2d30c (diff)
downloadlinux-23916a8e3d8f41aa91474e834ac99808b197c39e.tar.xz
[PATCH] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump
Add current pin settings to gpio_dump() output. This adds the last 'word' to the syslog lines, which displays the input and output values that the pin is set to. pc8736x_gpio.0: io00: 0x0044 TS OD PUE EDGE LO DEBOUNCE io:1/1 The 2 values may differ for a number of reasons: 1- the pin output circuitry is diaabled, (as the above 'TS' indicates) 2- it needs a pullup resistor to drive the attached circuit, 3- the external circuit needs a pullup so the open-drain has something to pull-down 4- the pin is wired to Vcc or Ground It might be appropriate to add a WARN for 2,3,4, since they could damage the chip and/or circuit, esp if misconfig goes unnoticed. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/char/nsc_gpio.c')
-rw-r--r--drivers/char/nsc_gpio.c6
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/char/nsc_gpio.c b/drivers/char/nsc_gpio.c
index d0b5d65a73fb..5b91e4e25641 100644
--- a/drivers/char/nsc_gpio.c
+++ b/drivers/char/nsc_gpio.c
@@ -26,7 +26,7 @@ void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index)
u32 config = amp->gpio_config(index, ~0, 0);
/* user requested via 'v' command, so its INFO */
- dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\n",
+ dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\tio:%d/%d\n",
index, config,
(config & 1) ? "OE" : "TS", /* output-enabled/tristate */
(config & 2) ? "PP" : "OD", /* push pull / open drain */
@@ -34,7 +34,9 @@ void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index)
(config & 8) ? "LOCKED" : "", /* locked / unlocked */
(config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
(config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */
- (config & 64) ? "DEBOUNCE" : ""); /* debounce */
+ (config & 64) ? "DEBOUNCE" : "", /* debounce */
+
+ amp->gpio_get(index), amp->gpio_current(index));
}
ssize_t nsc_gpio_write(struct file *file, const char __user *data,