summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/imx6q-cpufreq.c
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2013-08-14 18:08:24 +0400
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2013-10-31 03:11:08 +0400
commitd4019f0a92ab802f385cc9c8ad3ab7b5449712cb (patch)
treeebd06695585e457ae1bf219653452b111e7508db /drivers/cpufreq/imx6q-cpufreq.c
parent7dbf694db6ac7c759599316d50d7050efcbd512a (diff)
downloadlinux-d4019f0a92ab802f385cc9c8ad3ab7b5449712cb.tar.xz
cpufreq: move freq change notifications to cpufreq core
Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq/imx6q-cpufreq.c')
-rw-r--r--drivers/cpufreq/imx6q-cpufreq.c37
1 files changed, 15 insertions, 22 deletions
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 07af3b0de069..4b3f18e5f36b 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -42,14 +42,14 @@ static unsigned int imx6q_get_speed(unsigned int cpu)
static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
struct dev_pm_opp *opp;
unsigned long freq_hz, volt, volt_old;
+ unsigned int old_freq, new_freq;
int ret;
- freqs.new = freq_table[index].frequency;
- freq_hz = freqs.new * 1000;
- freqs.old = clk_get_rate(arm_clk) / 1000;
+ new_freq = freq_table[index].frequency;
+ freq_hz = new_freq * 1000;
+ old_freq = clk_get_rate(arm_clk) / 1000;
rcu_read_lock();
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
@@ -64,26 +64,23 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
volt_old = regulator_get_voltage(arm_reg);
dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
- freqs.old / 1000, volt_old / 1000,
- freqs.new / 1000, volt / 1000);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ old_freq / 1000, volt_old / 1000,
+ new_freq / 1000, volt / 1000);
/* scaling up? scale voltage before frequency */
- if (freqs.new > freqs.old) {
+ if (new_freq > old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_err(cpu_dev,
"failed to scale vddarm up: %d\n", ret);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/*
* Need to increase vddpu and vddsoc for safety
* if we are about to run at 1.2 GHz.
*/
- if (freqs.new == FREQ_1P2_GHZ / 1000) {
+ if (new_freq == FREQ_1P2_GHZ / 1000) {
regulator_set_voltage_tol(pu_reg,
PU_SOC_VOLTAGE_HIGH, 0);
regulator_set_voltage_tol(soc_reg,
@@ -103,21 +100,20 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
clk_set_parent(step_clk, pll2_pfd2_396m_clk);
clk_set_parent(pll1_sw_clk, step_clk);
if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
- clk_set_rate(pll1_sys_clk, freqs.new * 1000);
+ clk_set_rate(pll1_sys_clk, new_freq * 1000);
clk_set_parent(pll1_sw_clk, pll1_sys_clk);
}
/* Ensure the arm clock divider is what we expect */
- ret = clk_set_rate(arm_clk, freqs.new * 1000);
+ ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
regulator_set_voltage_tol(arm_reg, volt_old, 0);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/* scaling down? scale voltage after frequency */
- if (freqs.new < freqs.old) {
+ if (new_freq < old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_warn(cpu_dev,
@@ -125,7 +121,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
ret = 0;
}
- if (freqs.old == FREQ_1P2_GHZ / 1000) {
+ if (old_freq == FREQ_1P2_GHZ / 1000) {
regulator_set_voltage_tol(pu_reg,
PU_SOC_VOLTAGE_NORMAL, 0);
regulator_set_voltage_tol(soc_reg,
@@ -133,10 +129,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
}
}
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
+ return 0;
}
static int imx6q_cpufreq_init(struct cpufreq_policy *policy)