media: rc: harmonize infrared durations to microseconds

rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.

Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.

Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.

This affects:
 - rx_resolution member of struct rc_dev
 - timeout member of struct rc_dev
 - duration member in struct ir_raw_event

Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index f9616158bcf4..989dd573c669 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1070,7 +1070,7 @@ static int mceusb_set_timeout(struct rc_dev *dev, unsigned int timeout)
 	struct mceusb_dev *ir = dev->priv;
 	unsigned int units;
 
-	units = DIV_ROUND_CLOSEST(timeout, US_TO_NS(MCE_TIME_UNIT));
+	units = DIV_ROUND_CLOSEST(timeout, MCE_TIME_UNIT);
 
 	cmdbuf[2] = units >> 8;
 	cmdbuf[3] = units;
@@ -1196,7 +1196,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, u8 *buf_in)
 	switch (subcmd) {
 	/* 2-byte return value commands */
 	case MCE_RSP_EQIRTIMEOUT:
-		ir->rc->timeout = US_TO_NS((*hi << 8 | *lo) * MCE_TIME_UNIT);
+		ir->rc->timeout = (*hi << 8 | *lo) * MCE_TIME_UNIT;
 		break;
 	case MCE_RSP_EQIRNUMPORTS:
 		ir->num_txports = *hi;
@@ -1291,9 +1291,9 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 				ir->pulse_tunit += rawir.duration;
 				ir->pulse_count++;
 			}
-			rawir.duration *= US_TO_NS(MCE_TIME_UNIT);
+			rawir.duration *= MCE_TIME_UNIT;
 
-			dev_dbg(ir->dev, "Storing %s %u ns (%02x)",
+			dev_dbg(ir->dev, "Storing %s %u us (%02x)",
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration,	ir->buf_in[i]);
 
@@ -1605,8 +1605,8 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 	rc->dev.parent = dev;
 	rc->priv = ir;
 	rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
-	rc->min_timeout = US_TO_NS(MCE_TIME_UNIT);
-	rc->timeout = MS_TO_NS(100);
+	rc->min_timeout = MCE_TIME_UNIT;
+	rc->timeout = MS_TO_US(100);
 	if (!mceusb_model[ir->model].broken_irtimeout) {
 		rc->s_timeout = mceusb_set_timeout;
 		rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;