summaryrefslogtreecommitdiff
path: root/drivers/net/igb/e1000_82575.c
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2010-05-22 10:36:56 +0400
committerGrant Likely <grant.likely@secretlab.ca>2010-05-22 10:36:56 +0400
commitcf9b59e9d3e008591d1f54830f570982bb307a0d (patch)
tree113478ce8fd8c832ba726ffdf59b82cb46356476 /drivers/net/igb/e1000_82575.c
parent44504b2bebf8b5823c59484e73096a7d6574471d (diff)
parentf4b87dee923342505e1ddba8d34ce9de33e75050 (diff)
downloadlinux-cf9b59e9d3e008591d1f54830f570982bb307a0d.tar.xz
Merge remote branch 'origin' into secretlab/next-devicetree
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/net/igb/e1000_82575.c')
-rw-r--r--drivers/net/igb/e1000_82575.c35
1 files changed, 11 insertions, 24 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 4a32bed77c71..86438b59fa21 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -104,6 +104,12 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
case E1000_DEV_ID_82580_COPPER_DUAL:
mac->type = e1000_82580;
break;
+ case E1000_DEV_ID_I350_COPPER:
+ case E1000_DEV_ID_I350_FIBER:
+ case E1000_DEV_ID_I350_SERDES:
+ case E1000_DEV_ID_I350_SGMII:
+ mac->type = e1000_i350;
+ break;
default:
return -E1000_ERR_MAC_INIT;
break;
@@ -153,8 +159,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
if (mac->type == e1000_82580)
mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ if (mac->type == e1000_i350)
+ mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
/* reset */
- if (mac->type == e1000_82580)
+ if (mac->type >= e1000_82580)
mac->ops.reset_hw = igb_reset_hw_82580;
else
mac->ops.reset_hw = igb_reset_hw_82575;
@@ -225,7 +233,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
- } else if (hw->mac.type == e1000_82580) {
+ } else if (hw->mac.type >= e1000_82580) {
phy->ops.reset = igb_phy_hw_reset;
phy->ops.read_reg = igb_read_phy_reg_82580;
phy->ops.write_reg = igb_write_phy_reg_82580;
@@ -261,6 +269,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
break;
case I82580_I_PHY_ID:
+ case I350_I_PHY_ID:
phy->type = e1000_phy_82580;
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
phy->ops.get_cable_length = igb_get_cable_length_82580;
@@ -1205,8 +1214,6 @@ void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
/* If the management interface is not enabled, then power down */
if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
igb_power_down_phy_copper(hw);
-
- return;
}
/**
@@ -1445,7 +1452,6 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
**/
static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
{
- u32 mdicnfg = 0;
s32 ret_val;
@@ -1453,15 +1459,6 @@ static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
if (ret_val)
goto out;
- /*
- * We config the phy address in MDICNFG register now. Same bits
- * as before. The values in MDIC can be written but will be
- * ignored. This allows us to call the old function after
- * configuring the PHY address in the new register
- */
- mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT);
- wr32(E1000_MDICNFG, mdicnfg);
-
ret_val = igb_read_phy_reg_mdic(hw, offset, data);
hw->phy.ops.release(hw);
@@ -1480,7 +1477,6 @@ out:
**/
static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
{
- u32 mdicnfg = 0;
s32 ret_val;
@@ -1488,15 +1484,6 @@ static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
if (ret_val)
goto out;
- /*
- * We config the phy address in MDICNFG register now. Same bits
- * as before. The values in MDIC can be written but will be
- * ignored. This allows us to call the old function after
- * configuring the PHY address in the new register
- */
- mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT);
- wr32(E1000_MDICNFG, mdicnfg);
-
ret_val = igb_write_phy_reg_mdic(hw, offset, data);
hw->phy.ops.release(hw);