summaryrefslogtreecommitdiff
path: root/drivers/net/phy/sfp.c
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@armlinux.org.uk>2019-12-11 13:57:01 +0300
committerDavid S. Miller <davem@davemloft.net>2019-12-11 22:53:42 +0300
commit9a484621e88ac8386f131596ce8d76668daf7996 (patch)
treead1d99c336007b0c4012fa52f8a64d34e8c66516 /drivers/net/phy/sfp.c
parent75f4d8d10e016f7428c268424483a927ee7a78bb (diff)
downloadlinux-9a484621e88ac8386f131596ce8d76668daf7996.tar.xz
net: sfp: add support for Clause 45 PHYs
Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via the normal I2C address. Detect 10G BASE-T PHYs which may have an accessible PHY and probe for it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/sfp.c')
-rw-r--r--drivers/net/phy/sfp.c44
1 files changed, 40 insertions, 4 deletions
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index d7d2c797c89c..bfe268028154 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1402,12 +1402,12 @@ static void sfp_sm_phy_detach(struct sfp *sfp)
sfp->mod_phy = NULL;
}
-static void sfp_sm_probe_phy(struct sfp *sfp)
+static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
{
struct phy_device *phy;
int err;
- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
+ phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
if (phy == ERR_PTR(-ENODEV)) {
dev_info(sfp->dev, "no PHY detected\n");
return;
@@ -1417,6 +1417,13 @@ static void sfp_sm_probe_phy(struct sfp *sfp)
return;
}
+ err = phy_device_register(phy);
+ if (err) {
+ phy_device_free(phy);
+ dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
+ return;
+ }
+
err = sfp_add_phy(sfp->sfp_bus, phy);
if (err) {
phy_device_remove(phy);
@@ -1487,10 +1494,32 @@ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
}
}
+/* Probe a SFP for a PHY device if the module supports copper - the PHY
+ * normally sits at I2C bus address 0x56, and may either be a clause 22
+ * or clause 45 PHY.
+ *
+ * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with
+ * negotiation enabled, but some may be in 1000base-X - which is for the
+ * PHY driver to determine.
+ *
+ * Clause 45 copper SFP+ modules (10G) appear to switch their interface
+ * mode according to the negotiated line speed.
+ */
static void sfp_sm_probe_for_phy(struct sfp *sfp)
{
- if (sfp->id.base.e1000_base_t)
- sfp_sm_probe_phy(sfp);
+ switch (sfp->id.base.extended_cc) {
+ case SFF8024_ECC_10GBASE_T_SFI:
+ case SFF8024_ECC_10GBASE_T_SR:
+ case SFF8024_ECC_5GBASE_T:
+ case SFF8024_ECC_2_5GBASE_T:
+ sfp_sm_probe_phy(sfp, true);
+ break;
+
+ default:
+ if (sfp->id.base.e1000_base_t)
+ sfp_sm_probe_phy(sfp, false);
+ break;
+ }
}
static int sfp_module_parse_power(struct sfp *sfp)
@@ -1550,6 +1579,13 @@ static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable)
return -EAGAIN;
}
+ /* DM7052 reports as a high power module, responds to reads (with
+ * all bytes 0xff) at 0x51 but does not accept writes. In any case,
+ * if the bit is already set, we're already in high power mode.
+ */
+ if (!!(val & BIT(0)) == enable)
+ return 0;
+
if (enable)
val |= BIT(0);
else