Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 26 insertions, 35 deletions

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
index d60d00f6f6a0..0086f18cb79a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
@@ -4,27 +4,6 @@
 #include "mac.h"
 #include "../dma.h"
 
-static int
-mt7603_init_tx_queue(struct mt7603_dev *dev, int qid, int idx, int n_desc)
-{
-	struct mt76_queue *hwq;
-	int err;
-
-	hwq = devm_kzalloc(dev->mt76.dev, sizeof(*hwq), GFP_KERNEL);
-	if (!hwq)
-		return -ENOMEM;
-
-	err = mt76_queue_alloc(dev, hwq, idx, n_desc, 0, MT_TX_RING_BASE);
-	if (err < 0)
-		return err;
-
-	dev->mt76.q_tx[qid] = hwq;
-
-	mt7603_irq_enable(dev, MT_INT_TX_DONE(idx));
-
-	return 0;
-}
-
 static void
 mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 {
@@ -152,14 +131,16 @@ static int mt7603_poll_tx(struct napi_struct *napi, int budget)
 	dev = container_of(napi, struct mt7603_dev, mt76.tx_napi);
 	dev->tx_dma_check = 0;
 
-	for (i = MT_TXQ_MCU; i >= 0; i--)
-		mt76_queue_tx_cleanup(dev, i, false);
+	mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_WM], false);
+	for (i = MT_TXQ_PSD; i >= 0; i--)
+		mt76_queue_tx_cleanup(dev, dev->mphy.q_tx[i], false);
 
 	if (napi_complete_done(napi, 0))
 		mt7603_irq_enable(dev, MT_INT_TX_DONE_ALL);
 
-	for (i = MT_TXQ_MCU; i >= 0; i--)
-		mt76_queue_tx_cleanup(dev, i, false);
+	mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_WM], false);
+	for (i = MT_TXQ_PSD; i >= 0; i--)
+		mt76_queue_tx_cleanup(dev, dev->mphy.q_tx[i], false);
 
 	mt7603_mac_sta_poll(dev);
 
@@ -191,32 +172,42 @@ int mt7603_dma_init(struct mt7603_dev *dev)
 	mt7603_pse_client_reset(dev);
 
 	for (i = 0; i < ARRAY_SIZE(wmm_queue_map); i++) {
-		ret = mt7603_init_tx_queue(dev, i, wmm_queue_map[i],
-					   MT7603_TX_RING_SIZE);
+		ret = mt76_init_tx_queue(&dev->mphy, i, wmm_queue_map[i],
+					 MT7603_TX_RING_SIZE, MT_TX_RING_BASE);
 		if (ret)
 			return ret;
 	}
 
-	ret = mt7603_init_tx_queue(dev, MT_TXQ_PSD,
-				   MT_TX_HW_QUEUE_MGMT, MT7603_PSD_RING_SIZE);
+	ret = mt76_init_tx_queue(&dev->mphy, MT_TXQ_PSD, MT_TX_HW_QUEUE_MGMT,
+				 MT7603_PSD_RING_SIZE, MT_TX_RING_BASE);
 	if (ret)
 		return ret;
 
-	ret = mt7603_init_tx_queue(dev, MT_TXQ_MCU,
-				   MT_TX_HW_QUEUE_MCU, MT_MCU_RING_SIZE);
+	ret = mt76_init_mcu_queue(&dev->mt76, MT_MCUQ_WM, MT_TX_HW_QUEUE_MCU,
+				  MT_MCU_RING_SIZE, MT_TX_RING_BASE);
 	if (ret)
 		return ret;
 
-	ret = mt7603_init_tx_queue(dev, MT_TXQ_BEACON,
-				   MT_TX_HW_QUEUE_BCN, MT_MCU_RING_SIZE);
+	ret = mt76_init_tx_queue(&dev->mphy, MT_TXQ_BEACON, MT_TX_HW_QUEUE_BCN,
+				 MT_MCU_RING_SIZE, MT_TX_RING_BASE);
 	if (ret)
 		return ret;
 
-	ret = mt7603_init_tx_queue(dev, MT_TXQ_CAB,
-				   MT_TX_HW_QUEUE_BMC, MT_MCU_RING_SIZE);
+	ret = mt76_init_tx_queue(&dev->mphy, MT_TXQ_CAB, MT_TX_HW_QUEUE_BMC,
+				 MT_MCU_RING_SIZE, MT_TX_RING_BASE);
 	if (ret)
 		return ret;
 
+	mt7603_irq_enable(dev,
+			  MT_INT_TX_DONE(IEEE80211_AC_VO) |
+			  MT_INT_TX_DONE(IEEE80211_AC_VI) |
+			  MT_INT_TX_DONE(IEEE80211_AC_BE) |
+			  MT_INT_TX_DONE(IEEE80211_AC_BK) |
+			  MT_INT_TX_DONE(MT_TX_HW_QUEUE_MGMT) |
+			  MT_INT_TX_DONE(MT_TX_HW_QUEUE_MCU) |
+			  MT_INT_TX_DONE(MT_TX_HW_QUEUE_BCN) |
+			  MT_INT_TX_DONE(MT_TX_HW_QUEUE_BMC));
+
 	ret = mt7603_init_rx_queue(dev, &dev->mt76.q_rx[MT_RXQ_MCU], 1,
 				   MT7603_MCU_RX_RING_SIZE, MT_RX_BUF_SIZE);
 	if (ret)