rsi: handle BT traffic in driver

BT frames are passed through coex and hal modules to BUS.
After firmware is loaded, based on the operating mode CARD
READY frame comes for each protocol. When BT card ready is
received, BT attach is called.
Protocol operations are exchanged between the modules
at initialization time.
Build flag CONFIG_RSI_COEX is introduced to enable coex support
if CONFIG_BT_RSIHCI is enabled. Coex operations are valid if
coex mode is greater than 1 only.

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 46 insertions, 3 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 641c388b5666..b3e7d75dafae 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/firmware.h>
+#include <net/rsi_91x.h>
 #include "rsi_mgmt.h"
 #include "rsi_common.h"
 #include "rsi_coex.h"
@@ -35,6 +36,14 @@ u32 rsi_zone_enabled = /* INFO_ZONE |
 			0;
 EXPORT_SYMBOL_GPL(rsi_zone_enabled);
 
+#ifdef CONFIG_RSI_COEX
+static struct rsi_proto_ops g_proto_ops = {
+	.coex_send_pkt = rsi_coex_send_pkt,
+	.get_host_intf = rsi_get_host_intf,
+	.set_bt_context = rsi_set_bt_context,
+};
+#endif
+
 /**
  * rsi_dbg() - This function outputs informational messages.
  * @zone: Zone of interest for output message.
@@ -144,6 +153,9 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 	u32 index, length = 0, queueno = 0;
 	u16 actual_length = 0, offset;
 	struct sk_buff *skb = NULL;
+#ifdef CONFIG_RSI_COEX
+	u8 bt_pkt_type;
+#endif
 
 	index = 0;
 	do {
@@ -185,6 +197,25 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
 			break;
 
+#ifdef CONFIG_RSI_COEX
+		case RSI_BT_MGMT_Q:
+		case RSI_BT_DATA_Q:
+#define BT_RX_PKT_TYPE_OFST	14
+#define BT_CARD_READY_IND	0x89
+			bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
+			if (bt_pkt_type == BT_CARD_READY_IND) {
+				rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
+				if (rsi_bt_ops.attach(common, &g_proto_ops))
+					rsi_dbg(ERR_ZONE,
+						"Failed to attach BT module\n");
+			} else {
+				if (common->bt_adapter)
+					rsi_bt_ops.recv_pkt(common->bt_adapter,
+							frame_desc + offset);
+			}
+			break;
+#endif
+
 		default:
 			rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
 				__func__,   queueno);
@@ -232,6 +263,13 @@ enum rsi_host_intf rsi_get_host_intf(void *priv)
 
 	return common->priv->rsi_host_intf;
 }
+
+void rsi_set_bt_context(void *priv, void *bt_context)
+{
+	struct rsi_common *common = (struct rsi_common *)priv;
+
+	common->bt_adapter = bt_context;
+}
 #endif
 
 /**
@@ -323,13 +361,18 @@ void rsi_91x_deinit(struct rsi_hw *adapter)
 	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
 		skb_queue_purge(&common->tx_queue[ii]);
 
-	common->init_done = false;
-
 #ifdef CONFIG_RSI_COEX
-	if (common->coex_mode > 1)
+	if (common->coex_mode > 1) {
+		if (common->bt_adapter) {
+			rsi_bt_ops.detach(common->bt_adapter);
+			common->bt_adapter = NULL;
+		}
 		rsi_coex_detach(common);
+	}
 #endif
 
+	common->init_done = false;
+
 	kfree(common);
 	kfree(adapter->rsi_dev);
 	kfree(adapter);