Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 14 insertions, 10 deletions

diff --git a/drivers/ptp/ptp_clockmatrix.h b/drivers/ptp/ptp_clockmatrix.h
index 82840d72364a..645de2c66b64 100644
--- a/drivers/ptp/ptp_clockmatrix.h
+++ b/drivers/ptp/ptp_clockmatrix.h
@@ -15,6 +15,7 @@
 #define FW_FILENAME	"idtcm.bin"
 #define MAX_TOD		(4)
 #define MAX_PLL		(8)
+#define MAX_OUTPUT	(12)
 
 #define MAX_ABS_WRITE_PHASE_PICOSECONDS (107374182350LL)
 
@@ -44,18 +45,20 @@
 #define DEFAULT_TOD2_PTP_PLL		(2)
 #define DEFAULT_TOD3_PTP_PLL		(3)
 
-#define POST_SM_RESET_DELAY_MS		(3000)
-#define PHASE_PULL_IN_THRESHOLD_NS	(150000)
-#define PHASE_PULL_IN_THRESHOLD_NS_V487	(15000)
-#define TOD_WRITE_OVERHEAD_COUNT_MAX	(2)
-#define TOD_BYTE_COUNT			(11)
-#define WR_PHASE_SETUP_MS		(5000)
+#define POST_SM_RESET_DELAY_MS			(3000)
+#define PHASE_PULL_IN_THRESHOLD_NS_DEPRECATED	(150000)
+#define PHASE_PULL_IN_THRESHOLD_NS		(15000)
+#define TOD_WRITE_OVERHEAD_COUNT_MAX		(2)
+#define TOD_BYTE_COUNT				(11)
 
-#define OUTPUT_MODULE_FROM_INDEX(index)	(OUTPUT_0 + (index) * 0x10)
+#define PEROUT_ENABLE_OUTPUT_MASK	(0xdeadbeef)
 
-#define PEROUT_ENABLE_OUTPUT_MASK		(0xdeadbeef)
+#define IDTCM_MAX_WRITE_COUNT		(512)
 
-#define IDTCM_MAX_WRITE_COUNT			(512)
+#define FULL_FW_CFG_BYTES		(SCRATCH - GPIO_USER_CONTROL)
+#define FULL_FW_CFG_SKIPPED_BYTES	(((SCRATCH >> 7) \
+					  - (GPIO_USER_CONTROL >> 7)) \
+					 * 4) /* 4 bytes skipped every 0x80 */
 
 /* Values of DPLL_N.DPLL_MODE.PLL_MODE */
 enum pll_mode {
@@ -120,7 +123,7 @@ struct idtcm_channel {
 	enum pll_mode		pll_mode;
 	u8			pll;
 	u16			output_mask;
-	int			write_phase_ready;
+	u8			output_phase_adj[MAX_OUTPUT][4];
 };
 
 struct idtcm {
@@ -129,6 +132,7 @@ struct idtcm {
 	u8			page_offset;
 	u8			tod_mask;
 	char			version[16];
+	u8			deprecated;
 
 	/* Overhead calculation for adjtime */
 	u8			calculate_overhead_flag;