summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-rs5c372.c
diff options
context:
space:
mode:
authorJohn Stultz <john.stultz@linaro.org>2011-02-03 04:02:41 +0300
committerJohn Stultz <john.stultz@linaro.org>2011-02-04 00:02:35 +0300
commit16380c153a69c3784d2afaddfe0a22f353046cf6 (patch)
treee923f26334d999a1e456ca80c446fbf8b1c2eedd /drivers/rtc/rtc-rs5c372.c
parentac54cd2bd5b4db4f1c03392d63daf355627ea180 (diff)
downloadlinux-16380c153a69c3784d2afaddfe0a22f353046cf6.tar.xz
RTC: Convert rtc drivers to use the alarm_irq_enable method
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
Diffstat (limited to 'drivers/rtc/rtc-rs5c372.c')
-rw-r--r--drivers/rtc/rtc-rs5c372.c48
1 files changed, 34 insertions, 14 deletions
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index dd14e202c2c8..6aaa1550e3b1 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -299,14 +299,6 @@ rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
if (rs5c->type == rtc_rs5c372a
&& (buf & RS5C372A_CTRL1_SL1))
return -ENOIOCTLCMD;
- case RTC_AIE_OFF:
- case RTC_AIE_ON:
- /* these irq management calls only make sense for chips
- * which are wired up to an IRQ.
- */
- if (!rs5c->has_irq)
- return -ENOIOCTLCMD;
- break;
default:
return -ENOIOCTLCMD;
}
@@ -317,12 +309,6 @@ rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
addr = RS5C_ADDR(RS5C_REG_CTRL1);
switch (cmd) {
- case RTC_AIE_OFF: /* alarm off */
- buf &= ~RS5C_CTRL1_AALE;
- break;
- case RTC_AIE_ON: /* alarm on */
- buf |= RS5C_CTRL1_AALE;
- break;
case RTC_UIE_OFF: /* update off */
buf &= ~RS5C_CTRL1_CT_MASK;
break;
@@ -347,6 +333,39 @@ rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
#endif
+static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct rs5c372 *rs5c = i2c_get_clientdata(client);
+ unsigned char buf;
+ int status, addr;
+
+ buf = rs5c->regs[RS5C_REG_CTRL1];
+
+ if (!rs5c->has_irq)
+ return -EINVAL;
+
+ status = rs5c_get_regs(rs5c);
+ if (status < 0)
+ return status;
+
+ addr = RS5C_ADDR(RS5C_REG_CTRL1);
+ if (enabled)
+ buf |= RS5C_CTRL1_AALE;
+ else
+ buf &= ~RS5C_CTRL1_AALE;
+
+ if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
+ printk(KERN_WARNING "%s: can't update alarm\n",
+ rs5c->rtc->name);
+ status = -EIO;
+ } else
+ rs5c->regs[RS5C_REG_CTRL1] = buf;
+
+ return status;
+}
+
+
/* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI,
* which only exposes a polled programming interface; and since
* these calls map directly to those EFI requests; we don't demand
@@ -466,6 +485,7 @@ static const struct rtc_class_ops rs5c372_rtc_ops = {
.set_time = rs5c372_rtc_set_time,
.read_alarm = rs5c_read_alarm,
.set_alarm = rs5c_set_alarm,
+ .alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
};
#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)