summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-ep93xx.c
diff options
context:
space:
mode:
authorH Hartley Sweeten <hartleys@visionengravers.com>2013-07-02 21:09:29 +0400
committerMark Brown <broonie@linaro.org>2013-07-15 14:37:14 +0400
commitd9b65dfd44fdade5c0fde5f7b8a0f267e99f990d (patch)
treee2e4636fe3e3d3e980a3ac84ffa565f31d712360 /drivers/spi/spi-ep93xx.c
parentb2d185edbac9c40adb1d390ad966e6900992e69d (diff)
downloadlinux-d9b65dfd44fdade5c0fde5f7b8a0f267e99f990d.tar.xz
spi: spi-ep93xx: remove 'dss' from per chip private data
This value is only needed to set the bits per word for each transfer of a message. There is no reason to set the value in ep93xx_spi_enable() because ep93xx_spi_process_transfer() sets it again for each transfer. Just pass the t->bits_per_word directly to ep93xx_spi_chip_setup() in ep93xx_spi_process_transfer() and remove 'dss' from the per chip private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers/spi/spi-ep93xx.c')
-rw-r--r--drivers/spi/spi-ep93xx.c17
1 files changed, 7 insertions, 10 deletions
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 7a44163ace50..8d562526abe5 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -139,7 +139,6 @@ struct ep93xx_spi {
* @rate: max rate in hz this chip supports
* @div_cpsr: cpsr (pre-scaler) divider
* @div_scr: scr divider
- * @dss: bits per word (4 - 16 bits)
* @ops: private chip operations
*
* This structure is used to store hardware register specific settings for each
@@ -151,7 +150,6 @@ struct ep93xx_spi_chip {
unsigned long rate;
u8 div_cpsr;
u8 div_scr;
- u8 dss;
struct ep93xx_spi_chip_ops *ops;
};
@@ -329,8 +327,6 @@ static int ep93xx_spi_setup(struct spi_device *spi)
chip->rate = spi->max_speed_hz;
}
- chip->dss = bits_per_word_to_dss(spi->bits_per_word);
-
ep93xx_spi_cs_control(spi, false);
return 0;
}
@@ -407,22 +403,25 @@ static void ep93xx_spi_cleanup(struct spi_device *spi)
* ep93xx_spi_chip_setup() - configures hardware according to given @chip
* @espi: ep93xx SPI controller struct
* @chip: chip specific settings
+ * @bits_per_word: transfer bits_per_word
*
* This function sets up the actual hardware registers with settings given in
* @chip. Note that no validation is done so make sure that callers validate
* settings before calling this.
*/
static void ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
- const struct ep93xx_spi_chip *chip)
+ const struct ep93xx_spi_chip *chip,
+ u8 bits_per_word)
{
+ u8 dss = bits_per_word_to_dss(bits_per_word);
u16 cr0;
cr0 = chip->div_scr << SSPCR0_SCR_SHIFT;
cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT;
- cr0 |= chip->dss;
+ cr0 |= dss;
dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
- chip->spi->mode, chip->div_cpsr, chip->div_scr, chip->dss);
+ chip->spi->mode, chip->div_cpsr, chip->div_scr, dss);
dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0);
ep93xx_spi_write_u8(espi, SSPCPSR, chip->div_cpsr);
@@ -709,9 +708,7 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
return;
}
- chip->dss = bits_per_word_to_dss(t->bits_per_word);
-
- ep93xx_spi_chip_setup(espi, chip);
+ ep93xx_spi_chip_setup(espi, chip, t->bits_per_word);
espi->rx = 0;
espi->tx = 0;