Merge tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The only core work for SPI this time around is the completion of the
  conversion to the new style method for specifying transfer delays,
  meaning we can cope with what most controllers support more directly
  using conversions in the core rather than open coding in drivers.

  Otherwise it's a good stack of cleanups and fixes plus a few new
  drivers.

  Summary:

   - Completion of the conversion to new style transfer delay
     configuration

   - Introduction and use of module_parport_driver() helper, merged here
     as there's no parport tree

   - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon
     Kunpeng, MediaTek MT8195"

* tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits)
  spi: Rename enable1 to activate in spi_set_cs()
  spi: Convert Freescale QSPI binding to json schema
  spi: stm32-qspi: fix debug format string
  spi: tools: make a symbolic link to the header file spi.h
  spi: fsi: add a missing of_node_put
  spi: Make error handling of gpiod_count() call cleaner
  spidev: Add Micron SPI NOR Authenta device compatible
  spi: brcm,spi-bcm-qspi: convert to the json-schema
  spi: altera: Add DFL bus driver for Altera API Controller
  spi: altera: separate core code from platform code
  spi: stm32-qspi: Fix compilation warning in ARM64
  spi: Handle SPI device setup callback failure.
  spi: sync up initial chipselect state
  spi: stm32-qspi: Add dirmap support
  spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer
  spi: stm32-qspi: fix pm_runtime usage_count counter
  spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
  spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
  spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug
  spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
  ...

4 files changed, 38 insertions, 28 deletions

diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index 131b27c97209..9bf58aac0df2 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -223,10 +223,6 @@ struct dma_chan;
 /**
  * struct pl022_ssp_master - device.platform_data for SPI controller devices.
  * @bus_id: identifier for this bus
- * @num_chipselect: chipselects are used to distinguish individual
- *     SPI slaves, and are numbered from zero to num_chipselects - 1.
- *     each slave has a chipselect signal, but it's common that not
- *     every chipselect is connected to a slave.
  * @enable_dma: if true enables DMA driven transfers.
  * @dma_rx_param: parameter to locate an RX DMA channel.
  * @dma_tx_param: parameter to locate a TX DMA channel.
@@ -235,18 +231,15 @@ struct dma_chan;
  *     indicates no delay and the device will be suspended immediately.
  * @rt: indicates the controller should run the message pump with realtime
  *     priority to minimise the transfer latency on the bus.
- * @chipselects: list of <num_chipselects> chip select gpios
  */
 struct pl022_ssp_controller {
 	u16 bus_id;
-	u8 num_chipselect;
 	u8 enable_dma:1;
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 	void *dma_rx_param;
 	void *dma_tx_param;
 	int autosuspend_delay;
 	bool rt;
-	int *chipselects;
 };
 
 /**
@@ -265,8 +258,6 @@ struct pl022_ssp_controller {
  * @duplex: Microwire interface: Full/Half duplex
  * @clkdelay: on the PL023 variant, the delay in feeback clock cycles
  * before sampling the incoming line
- * @cs_control: function pointer to board-specific function to
- * assert/deassert I/O port to control HW generation of devices chip-select.
  */
 struct pl022_config_chip {
 	enum ssp_interface iface;
@@ -280,7 +271,6 @@ struct pl022_config_chip {
 	enum ssp_microwire_wait_state wait_state;
 	enum ssp_duplex duplex;
 	enum ssp_clkdelay clkdelay;
-	void (*cs_control) (u32 control);
 };
 
 #endif /* _SSP_PL022_H */
diff --git a/include/linux/parport.h b/include/linux/parport.h
index f981f794c850..1c16ffb8b908 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -332,9 +332,19 @@ int __must_check __parport_register_driver(struct parport_driver *,
 	__parport_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
 
 /* Unregister a high-level driver. */
-extern void parport_unregister_driver (struct parport_driver *);
 void parport_unregister_driver(struct parport_driver *);
 
+/**
+ * module_parport_driver() - Helper macro for registering a modular parport driver
+ * @__parport_driver: struct parport_driver to be used
+ *
+ * Helper macro for parport drivers which do not do anything special in module
+ * init and exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit().
+ */
+#define module_parport_driver(__parport_driver) \
+	module_driver(__parport_driver, parport_register_driver, parport_unregister_driver)
+
 /* If parport_register_driver doesn't fit your needs, perhaps
  * parport_find_xxx does. */
 extern struct parport *parport_find_number (int);
diff --git a/include/linux/spi/altera.h b/include/linux/spi/altera.h
index 2d42641499a6..2e2a622e56da 100644
--- a/include/linux/spi/altera.h
+++ b/include/linux/spi/altera.h
@@ -5,10 +5,13 @@
 #ifndef __LINUX_SPI_ALTERA_H
 #define __LINUX_SPI_ALTERA_H
 
+#include <linux/interrupt.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 #include <linux/types.h>
 
+#define ALTERA_SPI_MAX_CS		32
+
 /**
  * struct altera_spi_platform_data - Platform data of the Altera SPI driver
  * @mode_bits:		Mode bits of SPI master.
@@ -26,4 +29,22 @@ struct altera_spi_platform_data {
 	struct spi_board_info		*devices;
 };
 
+struct altera_spi {
+	int irq;
+	int len;
+	int count;
+	int bytes_per_word;
+	u32 imr;
+
+	/* data buffers */
+	const unsigned char *tx;
+	unsigned char *rx;
+
+	struct regmap *regmap;
+	u32 regoff;
+	struct device *dev;
+};
+
+extern irqreturn_t altera_spi_irq(int irq, void *dev);
+extern void altera_spi_init_master(struct spi_master *master);
 #endif /* __LINUX_SPI_ALTERA_H */
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 592897fa4f03..360a3bc767ca 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -19,7 +19,7 @@
 #include <uapi/linux/spi/spi.h>
 
 struct dma_chan;
-struct property_entry;
+struct software_node;
 struct spi_controller;
 struct spi_transfer;
 struct spi_controller_mem_ops;
@@ -247,7 +247,6 @@ static inline void *spi_get_drvdata(struct spi_device *spi)
 }
 
 struct spi_message;
-struct spi_transfer;
 
 /**
  * struct spi_driver - Host side "protocol" driver
@@ -510,6 +509,9 @@ struct spi_controller {
 
 #define SPI_MASTER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
 
+	/* flag indicating this is a non-devres managed controller */
+	bool			devm_allocated;
+
 	/* flag indicating this is an SPI slave controller */
 	bool			slave;
 
@@ -832,9 +834,6 @@ extern void spi_res_release(struct spi_controller *ctlr,
  * @delay: delay to be introduced after this transfer before
  *	(optionally) changing the chipselect status, then starting
  *	the next transfer or completing this @spi_message.
- * @delay_usecs: microseconds to delay after this transfer before
- *	(optionally) changing the chipselect status, then starting
- *	the next transfer or completing this @spi_message.
  * @word_delay: inter word delay to be introduced after each word size
  *	(set by bits_per_word) transmission.
  * @effective_speed_hz: the effective SCK-speed that was used to
@@ -946,7 +945,6 @@ struct spi_transfer {
 #define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
 #define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
 	u8		bits_per_word;
-	u16		delay_usecs;
 	struct spi_delay	delay;
 	struct spi_delay	cs_change_delay;
 	struct spi_delay	word_delay;
@@ -1060,14 +1058,6 @@ spi_transfer_del(struct spi_transfer *t)
 static inline int
 spi_transfer_delay_exec(struct spi_transfer *t)
 {
-	struct spi_delay d;
-
-	if (t->delay_usecs) {
-		d.value = t->delay_usecs;
-		d.unit = SPI_DELAY_UNIT_USECS;
-		return spi_delay_exec(&d, NULL);
-	}
-
 	return spi_delay_exec(&t->delay, t);
 }
 
@@ -1409,7 +1399,7 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * @modalias: Initializes spi_device.modalias; identifies the driver.
  * @platform_data: Initializes spi_device.platform_data; the particular
  *	data stored there is driver-specific.
- * @properties: Additional device properties for the device.
+ * @swnode: Software node for the device.
  * @controller_data: Initializes spi_device.controller_data; some
  *	controllers need hints about hardware setup, e.g. for DMA.
  * @irq: Initializes spi_device.irq; depends on how the board is wired.
@@ -1442,12 +1432,11 @@ struct spi_board_info {
 	 *
 	 * platform_data goes to spi_device.dev.platform_data,
 	 * controller_data goes to spi_device.controller_data,
-	 * device properties are copied and attached to spi_device,
 	 * irq is copied too
 	 */
 	char		modalias[SPI_NAME_SIZE];
 	const void	*platform_data;
-	const struct property_entry *properties;
+	const struct software_node *swnode;
 	void		*controller_data;
 	int		irq;