Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 68 insertions, 2 deletions

diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
index cf3d26c233e8..388e4492b81b 100755
--- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
@@ -1,7 +1,13 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="ping_ipv4 ping_ipv6 multipath_test"
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	multipath_test
+	ping_ipv4_blackhole
+	ping_ipv6_blackhole
+"
 NUM_NETIFS=8
 source lib.sh
 
@@ -280,6 +286,17 @@ multipath_test()
 	multipath4_test "Weighted MP 2:1" 2 1
 	multipath4_test "Weighted MP 11:45" 11 45
 
+	log_info "Running IPv4 multipath tests with IPv6 link-local nexthops"
+	ip nexthop replace id 101 via fe80:2::22 dev $rp12
+	ip nexthop replace id 102 via fe80:3::23 dev $rp13
+
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	ip nexthop replace id 102 via 169.254.3.23 dev $rp13
+	ip nexthop replace id 101 via 169.254.2.22 dev $rp12
+
 	log_info "Running IPv6 multipath tests"
 	multipath6_test "ECMP" 1 1
 	multipath6_test "Weighted MP 2:1" 2 1
@@ -291,6 +308,56 @@ multipath_test()
 	multipath6_l4_test "Weighted MP 11:45" 11 45
 }
 
+ping_ipv4_blackhole()
+{
+	RET=0
+
+	ip nexthop add id 1001 blackhole
+	ip nexthop add id 1002 group 1001
+
+	ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 1001
+	ping_do $h1 198.51.100.2
+	check_fail $? "ping did not fail when using a blackhole nexthop"
+
+	ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 1002
+	ping_do $h1 198.51.100.2
+	check_fail $? "ping did not fail when using a blackhole nexthop group"
+
+	ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 103
+	ping_do $h1 198.51.100.2
+	check_err $? "ping failed with a valid nexthop"
+
+	log_test "IPv4 blackhole ping"
+
+	ip nexthop del id 1002
+	ip nexthop del id 1001
+}
+
+ping_ipv6_blackhole()
+{
+	RET=0
+
+	ip -6 nexthop add id 1001 blackhole
+	ip nexthop add id 1002 group 1001
+
+	ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 1001
+	ping6_do $h1 2001:db8:2::2
+	check_fail $? "ping did not fail when using a blackhole nexthop"
+
+	ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 1002
+	ping6_do $h1 2001:db8:2::2
+	check_fail $? "ping did not fail when using a blackhole nexthop group"
+
+	ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 106
+	ping6_do $h1 2001:db8:2::2
+	check_err $? "ping failed with a valid nexthop"
+
+	log_test "IPv6 blackhole ping"
+
+	ip nexthop del id 1002
+	ip -6 nexthop del id 1001
+}
+
 setup_prepare()
 {
 	h1=${NETIFS[p1]}
@@ -312,7 +379,6 @@ setup_prepare()
 
 	router1_create
 	router2_create
-	routing_nh_obj
 
 	forwarding_enable
 }