Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 69 insertions, 3 deletions

diff --git a/tools/testing/selftests/net/psock_fanout.c b/tools/testing/selftests/net/psock_fanout.c
index 2c522f7a0aec..db4521335722 100644
--- a/tools/testing/selftests/net/psock_fanout.c
+++ b/tools/testing/selftests/net/psock_fanout.c
@@ -56,12 +56,15 @@
 
 #define RING_NUM_FRAMES			20
 
+static uint32_t cfg_max_num_members;
+
 /* Open a socket in a given fanout mode.
  * @return -1 if mode is bad, a valid socket otherwise */
 static int sock_fanout_open(uint16_t typeflags, uint16_t group_id)
 {
 	struct sockaddr_ll addr = {0};
-	int fd, val;
+	struct fanout_args args;
+	int fd, val, err;
 
 	fd = socket(PF_PACKET, SOCK_RAW, 0);
 	if (fd < 0) {
@@ -83,8 +86,18 @@ static int sock_fanout_open(uint16_t typeflags, uint16_t group_id)
 		exit(1);
 	}
 
-	val = (((int) typeflags) << 16) | group_id;
-	if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &val, sizeof(val))) {
+	if (cfg_max_num_members) {
+		args.id = group_id;
+		args.type_flags = typeflags;
+		args.max_num_members = cfg_max_num_members;
+		err = setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &args,
+				 sizeof(args));
+	} else {
+		val = (((int) typeflags) << 16) | group_id;
+		err = setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &val,
+				 sizeof(val));
+	}
+	if (err) {
 		if (close(fd)) {
 			perror("close packet");
 			exit(1);
@@ -286,6 +299,56 @@ static void test_control_group(void)
 	}
 }
 
+/* Test illegal max_num_members values */
+static void test_control_group_max_num_members(void)
+{
+	int fds[3];
+
+	fprintf(stderr, "test: control multiple sockets, max_num_members\n");
+
+	/* expected failure on greater than PACKET_FANOUT_MAX */
+	cfg_max_num_members = (1 << 16) + 1;
+	if (sock_fanout_open(PACKET_FANOUT_HASH, 0) != -1) {
+		fprintf(stderr, "ERROR: max_num_members > PACKET_FANOUT_MAX\n");
+		exit(1);
+	}
+
+	cfg_max_num_members = 256;
+	fds[0] = sock_fanout_open(PACKET_FANOUT_HASH, 0);
+	if (fds[0] == -1) {
+		fprintf(stderr, "ERROR: failed open\n");
+		exit(1);
+	}
+
+	/* expected failure on joining group with different max_num_members */
+	cfg_max_num_members = 257;
+	if (sock_fanout_open(PACKET_FANOUT_HASH, 0) != -1) {
+		fprintf(stderr, "ERROR: set different max_num_members\n");
+		exit(1);
+	}
+
+	/* success on joining group with same max_num_members */
+	cfg_max_num_members = 256;
+	fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, 0);
+	if (fds[1] == -1) {
+		fprintf(stderr, "ERROR: failed to join group\n");
+		exit(1);
+	}
+
+	/* success on joining group with max_num_members unspecified */
+	cfg_max_num_members = 0;
+	fds[2] = sock_fanout_open(PACKET_FANOUT_HASH, 0);
+	if (fds[2] == -1) {
+		fprintf(stderr, "ERROR: failed to join group\n");
+		exit(1);
+	}
+
+	if (close(fds[2]) || close(fds[1]) || close(fds[0])) {
+		fprintf(stderr, "ERROR: closing sockets\n");
+		exit(1);
+	}
+}
+
 /* Test creating a unique fanout group ids */
 static void test_unique_fanout_group_ids(void)
 {
@@ -426,8 +489,11 @@ int main(int argc, char **argv)
 
 	test_control_single();
 	test_control_group();
+	test_control_group_max_num_members();
 	test_unique_fanout_group_ids();
 
+	/* PACKET_FANOUT_MAX */
+	cfg_max_num_members = 1 << 16;
 	/* find a set of ports that do not collide onto the same socket */
 	ret = test_datapath(PACKET_FANOUT_HASH, port_off,
 			    expect_hash[0], expect_hash[1]);