diff options
| -rw-r--r-- | Documentation/driver-api/pm/devices.rst | 27 | ||||
| -rw-r--r-- | drivers/base/power/main.c | 73 | ||||
| -rw-r--r-- | include/linux/pm.h | 16 |
3 files changed, 105 insertions, 11 deletions
diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst index 53c1b0b06da5..b0fe63c91f8d 100644 --- a/Documentation/driver-api/pm/devices.rst +++ b/Documentation/driver-api/pm/devices.rst @@ -788,6 +788,29 @@ must reflect the "active" status for runtime PM in that case. During system-wide resume from a sleep state it's easiest to put devices into the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`. -Refer to that document for more information regarding this particular issue as +[Refer to that document for more information regarding this particular issue as well as for information on the device runtime power management framework in -general. +general.] + +However, it often is desirable to leave devices in suspend after system +transitions to the working state, especially if those devices had been in +runtime suspend before the preceding system-wide suspend (or analogous) +transition. Device drivers can use the ``DPM_FLAG_LEAVE_SUSPENDED`` flag to +indicate to the PM core (and middle-layer code) that they prefer the specific +devices handled by them to be left suspended and they have no problems with +skipping their system-wide resume callbacks for this reason. Whether or not the +devices will actually be left in suspend may depend on their state before the +given system suspend-resume cycle and on the type of the system transition under +way. In particular, devices are not left suspended if that transition is a +restore from hibernation, as device states are not guaranteed to be reflected +by the information stored in the hibernation image in that case. + +The middle-layer code involved in the handling of the device is expected to +indicate to the PM core if the device may be left in suspend by setting its +:c:member:`power.may_skip_resume` status bit which is checked by the PM core +during the "noirq" phase of the preceding system-wide suspend (or analogous) +transition. The middle layer is then responsible for handling the device as +appropriate in its "noirq" resume callback, which is executed regardless of +whether or not the device is left suspended, but the other resume callbacks +(except for ``->complete``) will be skipped automatically by the PM core if the +device really can be left in suspend. diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index db2f04415927..73ec6796d9e1 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -526,6 +526,18 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd) /*------------------------- Resume routines -------------------------*/ /** + * dev_pm_may_skip_resume - System-wide device resume optimization check. + * @dev: Target device. + * + * Checks whether or not the device may be left in suspend after a system-wide + * transition to the working state. + */ +bool dev_pm_may_skip_resume(struct device *dev) +{ + return !dev->power.must_resume && pm_transition.event != PM_EVENT_RESTORE; +} + +/** * device_resume_noirq - Execute a "noirq resume" callback for given device. * @dev: Device to handle. * @state: PM transition of the system being carried out. @@ -573,6 +585,19 @@ static int device_resume_noirq(struct device *dev, pm_message_t state, bool asyn error = dpm_run_callback(callback, dev, state, info); dev->power.is_noirq_suspended = false; + if (dev_pm_may_skip_resume(dev)) { + /* + * The device is going to be left in suspend, but it might not + * have been in runtime suspend before the system suspended, so + * its runtime PM status needs to be updated to avoid confusing + * the runtime PM framework when runtime PM is enabled for the + * device again. + */ + pm_runtime_set_suspended(dev); + dev->power.is_late_suspended = false; + dev->power.is_suspended = false; + } + Out: complete_all(&dev->power.completion); TRACE_RESUME(error); @@ -1074,6 +1099,22 @@ static pm_message_t resume_event(pm_message_t sleep_state) return PMSG_ON; } +static void dpm_superior_set_must_resume(struct device *dev) +{ + struct device_link *link; + int idx; + + if (dev->parent) + dev->parent->power.must_resume = true; + + idx = device_links_read_lock(); + + list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) + link->supplier->power.must_resume = true; + + device_links_read_unlock(idx); +} + /** * __device_suspend_noirq - Execute a "noirq suspend" callback for given device. * @dev: Device to handle. @@ -1125,10 +1166,28 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a } error = dpm_run_callback(callback, dev, state, info); - if (!error) - dev->power.is_noirq_suspended = true; - else + if (error) { async_error = error; + goto Complete; + } + + dev->power.is_noirq_suspended = true; + + if (dev_pm_test_driver_flags(dev, DPM_FLAG_LEAVE_SUSPENDED)) { + /* + * The only safe strategy here is to require that if the device + * may not be left in suspend, resume callbacks must be invoked + * for it. + */ + dev->power.must_resume = dev->power.must_resume || + !dev->power.may_skip_resume || + atomic_read(&dev->power.usage_count) > 1; + } else { + dev->power.must_resume = true; + } + + if (dev->power.must_resume) + dpm_superior_set_must_resume(dev); Complete: complete_all(&dev->power.completion); @@ -1485,6 +1544,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) dev->power.direct_complete = false; } + dev->power.may_skip_resume = false; + dev->power.must_resume = false; + dpm_watchdog_set(&wd, dev); device_lock(dev); @@ -1650,8 +1712,9 @@ static int device_prepare(struct device *dev, pm_message_t state) if (dev->power.syscore) return 0; - WARN_ON(dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) && - !pm_runtime_enabled(dev)); + WARN_ON(!pm_runtime_enabled(dev) && + dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND | + DPM_FLAG_LEAVE_SUSPENDED)); /* * If a device's parent goes into runtime suspend at the wrong time, diff --git a/include/linux/pm.h b/include/linux/pm.h index 65d39115f06d..b5a40b713e9e 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -556,9 +556,10 @@ struct pm_subsys_data { * These flags can be set by device drivers at the probe time. They need not be * cleared by the drivers as the driver core will take care of that. * - * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. + * NEVER_SKIP: Do not skip all system suspend/resume callbacks for the device. * SMART_PREPARE: Check the return value of the driver's ->prepare callback. * SMART_SUSPEND: No need to resume the device from runtime suspend. + * LEAVE_SUSPENDED: Avoid resuming the device during system resume if possible. * * Setting SMART_PREPARE instructs bus types and PM domains which may want * system suspend/resume callbacks to be skipped for the device to return 0 from @@ -572,10 +573,14 @@ struct pm_subsys_data { * necessary from the driver's perspective. It also may cause them to skip * invocations of the ->suspend_late and ->suspend_noirq callbacks provided by * the driver if they decide to leave the device in runtime suspend. + * + * Setting LEAVE_SUSPENDED informs the PM core and middle-layer code that the + * driver prefers the device to be left in suspend after system resume. */ -#define DPM_FLAG_NEVER_SKIP BIT(0) -#define DPM_FLAG_SMART_PREPARE BIT(1) -#define DPM_FLAG_SMART_SUSPEND BIT(2) +#define DPM_FLAG_NEVER_SKIP BIT(0) +#define DPM_FLAG_SMART_PREPARE BIT(1) +#define DPM_FLAG_SMART_SUSPEND BIT(2) +#define DPM_FLAG_LEAVE_SUSPENDED BIT(3) struct dev_pm_info { pm_message_t power_state; @@ -597,6 +602,8 @@ struct dev_pm_info { bool wakeup_path:1; bool syscore:1; bool no_pm_callbacks:1; /* Owned by the PM core */ + unsigned int must_resume:1; /* Owned by the PM core */ + unsigned int may_skip_resume:1; /* Set by subsystems */ #else unsigned int should_wakeup:1; #endif @@ -765,6 +772,7 @@ extern int pm_generic_poweroff_late(struct device *dev); extern int pm_generic_poweroff(struct device *dev); extern void pm_generic_complete(struct device *dev); +extern bool dev_pm_may_skip_resume(struct device *dev); extern bool dev_pm_smart_suspend_and_suspended(struct device *dev); #else /* !CONFIG_PM_SLEEP */ |