summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/platforms/cell/Kconfig26
-rw-r--r--arch/powerpc/platforms/cell/Makefile3
-rw-r--r--drivers/cpufreq/Kconfig.powerpc18
-rw-r--r--drivers/cpufreq/Makefile3
-rw-r--r--drivers/cpufreq/ppc_cbe_cpufreq.c (renamed from arch/powerpc/platforms/cell/cbe_cpufreq.c)3
-rw-r--r--drivers/cpufreq/ppc_cbe_cpufreq.h (renamed from arch/powerpc/platforms/cell/cbe_cpufreq.h)4
-rw-r--r--drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (renamed from arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c)2
-rw-r--r--drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (renamed from arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c)2
8 files changed, 28 insertions, 33 deletions
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 53aaefeb3386..9978f594cac0 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -113,34 +113,10 @@ config CBE_THERM
default m
depends on CBE_RAS && SPU_BASE
-config CBE_CPUFREQ
- tristate "CBE frequency scaling"
- depends on CBE_RAS && CPU_FREQ
- default m
- help
- This adds the cpufreq driver for Cell BE processors.
- For details, take a look at <file:Documentation/cpu-freq/>.
- If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
- bool "CBE frequency scaling using PMI interface"
- depends on CBE_CPUFREQ
- default n
- help
- Select this, if you want to use the PMI interface
- to switch frequencies. Using PMI, the
- processor will not only be able to run at lower speed,
- but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
- tristate
- depends on CBE_CPUFREQ_PMI_ENABLE
- default CBE_CPUFREQ
-
config PPC_PMI
tristate
default y
- depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+ depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
help
PMI (Platform Management Interrupt) is a way to
communicate with the BMC (Baseboard Management Controller).
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index a4a89350bcfc..fe053e7c73ee 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += iommu.o setup.o spider-pic.o \
obj-$(CONFIG_CBE_RAS) += ras.o
obj-$(CONFIG_CBE_THERM) += cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o
-cbe-cpufreq-y += cbe_cpufreq_pervasive.o cbe_cpufreq.o
obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR) += cpufreq_spudemand.o
obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index e76992f79683..9c926ca0d718 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -1,3 +1,21 @@
+config CPU_FREQ_CBE
+ tristate "CBE frequency scaling"
+ depends on CBE_RAS && PPC_CELL
+ default m
+ help
+ This adds the cpufreq driver for Cell BE processors.
+ For details, take a look at <file:Documentation/cpu-freq/>.
+ If you don't have such processor, say N
+
+config CPU_FREQ_CBE_PMI
+ bool "CBE frequency scaling using PMI interface"
+ depends on CPU_FREQ_CBE
+ default n
+ help
+ Select this, if you want to use the PMI interface to switch
+ frequencies. Using PMI, the processor will not only be able to run at
+ lower speed, but also at lower core voltage.
+
config CPU_FREQ_MAPLE
bool "Support for Maple 970FX Evaluation Board"
depends on PPC_MAPLE
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 3a9ff23ff9d9..17417c7ee135 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -73,6 +73,9 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
##################################################################################
# PowerPC platform drivers
+obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
+ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
+obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
##################################################################################
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
index 718c6a33023d..e577a1dbbfcd 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -27,7 +27,8 @@
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
+
+#include "ppc_cbe_cpufreq.h"
static DEFINE_MUTEX(cbe_switch_mutex);
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
index c1d86bfa92ff..b4c00a5a6a59 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.h
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.h
@@ -1,5 +1,5 @@
/*
- * cbe_cpufreq.h
+ * ppc_cbe_cpufreq.h
*
* This file contains the definitions used by the cbe_cpufreq driver.
*
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
+#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
extern bool cbe_cpufreq_has_pmi;
#else
#define cbe_cpufreq_has_pmi (0)
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
index 20472e487b6f..84d2f2cf5ba7 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c
@@ -30,7 +30,7 @@
#include <asm/hw_irq.h>
#include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
+#include "ppc_cbe_cpufreq.h"
/* to write to MIC register */
static u64 MIC_Slow_Fast_Timer_table[] = {
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 60a07a4f9326..d29e8da396a0 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -35,7 +35,7 @@
#include <asm/time.h>
#endif
-#include "cbe_cpufreq.h"
+#include "ppc_cbe_cpufreq.h"
static u8 pmi_slow_mode_limit[MAX_CBE];