summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts')
-rw-r--r--arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts348
1 files changed, 14 insertions, 334 deletions
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
index b380268750f3..197aa98d49e2 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -1,243 +1,23 @@
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM STM32MP1 variant:
+ * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2
+ * DHCOR PCB number: 587-200 or newer
+ * PDK2 PCB number: 516-400 or newer
*/
+/dts-v1/;
-#include "stm32mp157c-dhcom-som.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pwm/pwm.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-pdk2.dtsi"
/ {
- model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
- compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
-
- aliases {
- serial0 = &uart4;
- serial1 = &usart3;
- serial2 = &uart8;
- ethernet0 = &ethernet0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- clk_ext_audio_codec: clock-codec {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
-
- display_bl: display-bl {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
- default-brightness-level = <8>;
- enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- ethernet_vio: vioregulator {
- compatible = "regulator-fixed";
- regulator-name = "vio";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #size-cells = <0>;
- poll-interval = <20>;
-
- /*
- * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
- * so mark this as polled GPIO key.
- */
- button-0 {
- label = "TA1-GPIO-A";
- linux,code = <KEY_A>;
- gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #size-cells = <0>;
-
- button-1 {
- label = "TA2-GPIO-B";
- linux,code = <KEY_B>;
- gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
-
- button-2 {
- label = "TA3-GPIO-C";
- linux,code = <KEY_C>;
- gpios = <&gpioi 11 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
-
- button-3 {
- label = "TA4-GPIO-D";
- linux,code = <KEY_D>;
- gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
- };
-
- led {
- compatible = "gpio-leds";
-
- led-0 {
- label = "green:led5";
- gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led-1 {
- label = "green:led6";
- gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led-2 {
- label = "green:led7";
- gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led-3 {
- label = "green:led8";
- gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- panel {
- compatible = "edt,etm0700g0edh6";
- backlight = <&display_bl>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-
- sound {
- compatible = "audio-graph-card";
- routing =
- "MIC_IN", "Capture",
- "Capture", "Mic Bias",
- "Playback", "HP_OUT";
- dais = <&sai2a_port &sai2b_port>;
- status = "okay";
- };
-};
-
-&cec {
- pinctrl-names = "default";
- pinctrl-0 = <&cec_pins_a>;
- status = "okay";
-};
-
-&ethernet0 {
- status = "okay";
- pinctrl-0 = <&ethernet0_rmii_pins_a>;
- pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rmii";
- max-speed = <100>;
- phy-handle = <&phy0>;
- st,eth-ref-clk-sel;
- phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
-
- phy0: ethernet-phy@1 {
- reg = <1>;
- };
- };
-};
-
-&i2c2 { /* Header X22 */
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
- /* spare dmas for other usage */
- /delete-property/dmas;
- /delete-property/dma-names;
- status = "okay";
-};
-
-&i2c5 { /* Header X21 */
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
- /* spare dmas for other usage */
- /delete-property/dmas;
- /delete-property/dma-names;
-
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- #sound-dai-cells = <0>;
- clocks = <&clk_ext_audio_codec>;
- VDDA-supply = <&v3v3>;
- VDDIO-supply = <&vdd>;
-
- sgtl5000_port: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sgtl5000_tx_endpoint: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
- };
-
- sgtl5000_rx_endpoint: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
- };
- };
-
- };
-
- polytouch@38 {
- compatible = "edt,edt-ft5x06";
- reg = <0x38>;
- interrupt-parent = <&gpiog>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
- linux,wakeup;
- };
-};
-
-&ltdc {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&ltdc_pins_b>;
- pinctrl-1 = <&ltdc_sleep_pins_b>;
- status = "okay";
-
- port {
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
+ model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)";
+ compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som",
+ "st,stm32mp157";
};
&m_can1 {
@@ -246,103 +26,3 @@
pinctrl-1 = <&m_can1_sleep_pins_a>;
status = "okay";
};
-
-&sai2 {
- clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
- pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
- status = "okay";
-
- sai2a: audio-controller@4400b004 {
- #clock-cells = <0>;
- dma-names = "tx";
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- status = "okay";
-
- sai2a_port: port {
- sai2a_endpoint: endpoint {
- remote-endpoint = <&sgtl5000_tx_endpoint>;
- format = "i2s";
- mclk-fs = <512>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <16>;
- };
- };
- };
-
- sai2b: audio-controller@4400b024 {
- dma-names = "rx";
- st,sync = <&sai2a 2>;
- clocks = <&rcc SAI2_K>, <&sai2a>;
- clock-names = "sai_ck", "MCLK";
- status = "okay";
-
- sai2b_port: port {
- sai2b_endpoint: endpoint {
- remote-endpoint = <&sgtl5000_rx_endpoint>;
- format = "i2s";
- mclk-fs = <512>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <16>;
- };
- };
- };
-};
-
-&timers2 {
- /* spare dmas for other usage (un-delete to enable pwm capture) */
- /delete-property/dmas;
- /delete-property/dma-names;
- status = "okay";
- pwm2: pwm {
- pinctrl-0 = <&pwm2_pins_a>;
- pinctrl-names = "default";
- status = "okay";
- };
- timer@1 {
- status = "okay";
- };
-};
-
-&usart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&usart3_pins_a>;
- status = "okay";
-};
-
-&uart8 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart8_pins_a>;
- status = "okay";
-};
-
-&usbh_ehci {
- phys = <&usbphyc_port0>;
- status = "okay";
-};
-
-&usbotg_hs {
- dr_mode = "peripheral";
- phys = <&usbphyc_port1 0>;
- phy-names = "usb2-phy";
- status = "okay";
-};
-
-&usbphyc {
- status = "okay";
-};
-
-&usbphyc_port0 {
- phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
-};
-
-&usbphyc_port1 {
- phy-supply = <&vdd_usb>;
- vdda1v1-supply = <&reg11>;
- vdda1v8-supply = <&reg18>;
-};