summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/vlv_dsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/display/vlv_dsi.c')
-rw-r--r--drivers/gpu/drm/i915/display/vlv_dsi.c1996
1 files changed, 1996 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
new file mode 100644
index 000000000000..e272d826210a
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -0,0 +1,1996 @@
+/*
+ * Copyright © 2013 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Jani Nikula <jani.nikula@intel.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include "i915_drv.h"
+#include "intel_atomic.h"
+#include "intel_connector.h"
+#include "intel_drv.h"
+#include "intel_dsi.h"
+#include "intel_fifo_underrun.h"
+#include "intel_panel.h"
+#include "intel_sideband.h"
+
+/* return pixels in terms of txbyteclkhs */
+static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
+ u16 burst_mode_ratio)
+{
+ return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
+ 8 * 100), lane_count);
+}
+
+/* return pixels equvalent to txbyteclkhs */
+static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
+ u16 burst_mode_ratio)
+{
+ return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
+ (bpp * burst_mode_ratio));
+}
+
+enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt)
+{
+ /* It just so happens the VBT matches register contents. */
+ switch (fmt) {
+ case VID_MODE_FORMAT_RGB888:
+ return MIPI_DSI_FMT_RGB888;
+ case VID_MODE_FORMAT_RGB666:
+ return MIPI_DSI_FMT_RGB666;
+ case VID_MODE_FORMAT_RGB666_PACKED:
+ return MIPI_DSI_FMT_RGB666_PACKED;
+ case VID_MODE_FORMAT_RGB565:
+ return MIPI_DSI_FMT_RGB565;
+ default:
+ MISSING_CASE(fmt);
+ return MIPI_DSI_FMT_RGB666;
+ }
+}
+
+void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
+{
+ struct drm_encoder *encoder = &intel_dsi->base.base;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ u32 mask;
+
+ mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
+ LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
+
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_GEN_FIFO_STAT(port), mask, mask,
+ 100))
+ DRM_ERROR("DPI FIFOs are not empty\n");
+}
+
+static void write_data(struct drm_i915_private *dev_priv,
+ i915_reg_t reg,
+ const u8 *data, u32 len)
+{
+ u32 i, j;
+
+ for (i = 0; i < len; i += 4) {
+ u32 val = 0;
+
+ for (j = 0; j < min_t(u32, len - i, 4); j++)
+ val |= *data++ << 8 * j;
+
+ I915_WRITE(reg, val);
+ }
+}
+
+static void read_data(struct drm_i915_private *dev_priv,
+ i915_reg_t reg,
+ u8 *data, u32 len)
+{
+ u32 i, j;
+
+ for (i = 0; i < len; i += 4) {
+ u32 val = I915_READ(reg);
+
+ for (j = 0; j < min_t(u32, len - i, 4); j++)
+ *data++ = val >> 8 * j;
+ }
+}
+
+static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct intel_dsi_host *intel_dsi_host = to_intel_dsi_host(host);
+ struct drm_device *dev = intel_dsi_host->intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ enum port port = intel_dsi_host->port;
+ struct mipi_dsi_packet packet;
+ ssize_t ret;
+ const u8 *header, *data;
+ i915_reg_t data_reg, ctrl_reg;
+ u32 data_mask, ctrl_mask;
+
+ ret = mipi_dsi_create_packet(&packet, msg);
+ if (ret < 0)
+ return ret;
+
+ header = packet.header;
+ data = packet.payload;
+
+ if (msg->flags & MIPI_DSI_MSG_USE_LPM) {
+ data_reg = MIPI_LP_GEN_DATA(port);
+ data_mask = LP_DATA_FIFO_FULL;
+ ctrl_reg = MIPI_LP_GEN_CTRL(port);
+ ctrl_mask = LP_CTRL_FIFO_FULL;
+ } else {
+ data_reg = MIPI_HS_GEN_DATA(port);
+ data_mask = HS_DATA_FIFO_FULL;
+ ctrl_reg = MIPI_HS_GEN_CTRL(port);
+ ctrl_mask = HS_CTRL_FIFO_FULL;
+ }
+
+ /* note: this is never true for reads */
+ if (packet.payload_length) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_GEN_FIFO_STAT(port),
+ data_mask, 0,
+ 50))
+ DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n");
+
+ write_data(dev_priv, data_reg, packet.payload,
+ packet.payload_length);
+ }
+
+ if (msg->rx_len) {
+ I915_WRITE(MIPI_INTR_STAT(port), GEN_READ_DATA_AVAIL);
+ }
+
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_GEN_FIFO_STAT(port),
+ ctrl_mask, 0,
+ 50)) {
+ DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n");
+ }
+
+ I915_WRITE(ctrl_reg, header[2] << 16 | header[1] << 8 | header[0]);
+
+ /* ->rx_len is set only for reads */
+ if (msg->rx_len) {
+ data_mask = GEN_READ_DATA_AVAIL;
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_INTR_STAT(port),
+ data_mask, data_mask,
+ 50))
+ DRM_ERROR("Timeout waiting for read data.\n");
+
+ read_data(dev_priv, data_reg, msg->rx_buf, msg->rx_len);
+ }
+
+ /* XXX: fix for reads and writes */
+ return 4 + packet.payload_length;
+}
+
+static int intel_dsi_host_attach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *dsi)
+{
+ return 0;
+}
+
+static int intel_dsi_host_detach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *dsi)
+{
+ return 0;
+}
+
+static const struct mipi_dsi_host_ops intel_dsi_host_ops = {
+ .attach = intel_dsi_host_attach,
+ .detach = intel_dsi_host_detach,
+ .transfer = intel_dsi_host_transfer,
+};
+
+/*
+ * send a video mode command
+ *
+ * XXX: commands with data in MIPI_DPI_DATA?
+ */
+static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs,
+ enum port port)
+{
+ struct drm_encoder *encoder = &intel_dsi->base.base;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ u32 mask;
+
+ /* XXX: pipe, hs */
+ if (hs)
+ cmd &= ~DPI_LP_MODE;
+ else
+ cmd |= DPI_LP_MODE;
+
+ /* clear bit */
+ I915_WRITE(MIPI_INTR_STAT(port), SPL_PKT_SENT_INTERRUPT);
+
+ /* XXX: old code skips write if control unchanged */
+ if (cmd == I915_READ(MIPI_DPI_CONTROL(port)))
+ DRM_DEBUG_KMS("Same special packet %02x twice in a row.\n", cmd);
+
+ I915_WRITE(MIPI_DPI_CONTROL(port), cmd);
+
+ mask = SPL_PKT_SENT_INTERRUPT;
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_INTR_STAT(port), mask, mask,
+ 100))
+ DRM_ERROR("Video mode command 0x%08x send failed.\n", cmd);
+
+ return 0;
+}
+
+static void band_gap_reset(struct drm_i915_private *dev_priv)
+{
+ vlv_flisdsi_get(dev_priv);
+
+ vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
+ vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
+ vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
+ udelay(150);
+ vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
+ vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
+
+ vlv_flisdsi_put(dev_priv);
+}
+
+static int intel_dsi_compute_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config,
+ struct drm_connector_state *conn_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
+ base);
+ struct intel_connector *intel_connector = intel_dsi->attached_connector;
+ struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
+ const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+ struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ int ret;
+
+ DRM_DEBUG_KMS("\n");
+ pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+
+ if (fixed_mode) {
+ intel_fixed_panel_mode(fixed_mode, adjusted_mode);
+
+ if (HAS_GMCH(dev_priv))
+ intel_gmch_panel_fitting(crtc, pipe_config,
+ conn_state->scaling_mode);
+ else
+ intel_pch_panel_fitting(crtc, pipe_config,
+ conn_state->scaling_mode);
+ }
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ return -EINVAL;
+
+ /* DSI uses short packets for sync events, so clear mode flags for DSI */
+ adjusted_mode->flags = 0;
+
+ if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB888)
+ pipe_config->pipe_bpp = 24;
+ else
+ pipe_config->pipe_bpp = 18;
+
+ if (IS_GEN9_LP(dev_priv)) {
+ /* Enable Frame time stamp based scanline reporting */
+ adjusted_mode->private_flags |=
+ I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
+
+ /* Dual link goes to DSI transcoder A. */
+ if (intel_dsi->ports == BIT(PORT_C))
+ pipe_config->cpu_transcoder = TRANSCODER_DSI_C;
+ else
+ pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
+
+ ret = bxt_dsi_pll_compute(encoder, pipe_config);
+ if (ret)
+ return -EINVAL;
+ } else {
+ ret = vlv_dsi_pll_compute(encoder, pipe_config);
+ if (ret)
+ return -EINVAL;
+ }
+
+ pipe_config->clock_set = true;
+
+ return 0;
+}
+
+static bool glk_dsi_enable_io(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 tmp;
+ bool cold_boot = false;
+
+ /* Set the MIPI mode
+ * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
+ * Power ON MIPI IO first and then write into IO reset and LP wake bits
+ */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(MIPI_CTRL(port));
+ I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE);
+ }
+
+ /* Put the IO into reset */
+ tmp = I915_READ(MIPI_CTRL(PORT_A));
+ tmp &= ~GLK_MIPIIO_RESET_RELEASED;
+ I915_WRITE(MIPI_CTRL(PORT_A), tmp);
+
+ /* Program LP Wake */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(MIPI_CTRL(port));
+ if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
+ tmp &= ~GLK_LP_WAKE;
+ else
+ tmp |= GLK_LP_WAKE;
+ I915_WRITE(MIPI_CTRL(port), tmp);
+ }
+
+ /* Wait for Pwr ACK */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_MIPIIO_PORT_POWERED,
+ GLK_MIPIIO_PORT_POWERED,
+ 20))
+ DRM_ERROR("MIPIO port is powergated\n");
+ }
+
+ /* Check for cold boot scenario */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ cold_boot |=
+ !(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY);
+ }
+
+ return cold_boot;
+}
+
+static void glk_dsi_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 val;
+
+ /* Wait for MIPI PHY status bit to set */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_PHY_STATUS_PORT_READY,
+ GLK_PHY_STATUS_PORT_READY,
+ 20))
+ DRM_ERROR("PHY is not ON\n");
+ }
+
+ /* Get IO out of reset */
+ val = I915_READ(MIPI_CTRL(PORT_A));
+ I915_WRITE(MIPI_CTRL(PORT_A), val | GLK_MIPIIO_RESET_RELEASED);
+
+ /* Get IO out of Low power state*/
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= DEVICE_READY;
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ usleep_range(10, 15);
+ } else {
+ /* Enter ULPS */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_ENTER | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+ /* Wait for ULPS active */
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_ULPS_NOT_ACTIVE,
+ 0,
+ 20))
+ DRM_ERROR("ULPS not active\n");
+
+ /* Exit ULPS */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_EXIT | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+ /* Enter Normal Mode */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+ val = I915_READ(MIPI_CTRL(port));
+ val &= ~GLK_LP_WAKE;
+ I915_WRITE(MIPI_CTRL(port), val);
+ }
+ }
+
+ /* Wait for Stop state */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_DATA_LANE_STOP_STATE,
+ GLK_DATA_LANE_STOP_STATE,
+ 20))
+ DRM_ERROR("Date lane not in STOP state\n");
+ }
+
+ /* Wait for AFE LATCH */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ BXT_MIPI_PORT_CTRL(port),
+ AFE_LATCHOUT,
+ AFE_LATCHOUT,
+ 20))
+ DRM_ERROR("D-PHY not entering LP-11 state\n");
+ }
+}
+
+static void bxt_dsi_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 val;
+
+ DRM_DEBUG_KMS("\n");
+
+ /* Enable MIPI PHY transparent latch */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ val = I915_READ(BXT_MIPI_PORT_CTRL(port));
+ I915_WRITE(BXT_MIPI_PORT_CTRL(port), val | LP_OUTPUT_HOLD);
+ usleep_range(2000, 2500);
+ }
+
+ /* Clear ULPS and set device ready */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ usleep_range(2000, 2500);
+ val |= DEVICE_READY;
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ }
+}
+
+static void vlv_dsi_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 val;
+
+ DRM_DEBUG_KMS("\n");
+
+ vlv_flisdsi_get(dev_priv);
+ /* program rcomp for compliance, reduce from 50 ohms to 45 ohms
+ * needed everytime after power gate */
+ vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
+ vlv_flisdsi_put(dev_priv);
+
+ /* bandgap reset is needed after everytime we do power gate */
+ band_gap_reset(dev_priv);
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+
+ I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER);
+ usleep_range(2500, 3000);
+
+ /* Enable MIPI PHY transparent latch
+ * Common bit for both MIPI Port A & MIPI Port C
+ * No similar bit in MIPI Port C reg
+ */
+ val = I915_READ(MIPI_PORT_CTRL(PORT_A));
+ I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD);
+ usleep_range(1000, 1500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_EXIT);
+ usleep_range(2500, 3000);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY);
+ usleep_range(2500, 3000);
+ }
+}
+
+static void intel_dsi_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+ if (IS_GEMINILAKE(dev_priv))
+ glk_dsi_device_ready(encoder);
+ else if (IS_GEN9_LP(dev_priv))
+ bxt_dsi_device_ready(encoder);
+ else
+ vlv_dsi_device_ready(encoder);
+}
+
+static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 val;
+
+ /* Enter ULPS */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_ENTER | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ }
+
+ /* Wait for MIPI PHY status bit to unset */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_PHY_STATUS_PORT_READY, 0, 20))
+ DRM_ERROR("PHY is not turning OFF\n");
+ }
+
+ /* Wait for Pwr ACK bit to unset */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_MIPIIO_PORT_POWERED, 0, 20))
+ DRM_ERROR("MIPI IO Port is not powergated\n");
+ }
+}
+
+static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 tmp;
+
+ /* Put the IO into reset */
+ tmp = I915_READ(MIPI_CTRL(PORT_A));
+ tmp &= ~GLK_MIPIIO_RESET_RELEASED;
+ I915_WRITE(MIPI_CTRL(PORT_A), tmp);
+
+ /* Wait for MIPI PHY status bit to unset */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(&dev_priv->uncore,
+ MIPI_CTRL(port),
+ GLK_PHY_STATUS_PORT_READY, 0, 20))
+ DRM_ERROR("PHY is not turning OFF\n");
+ }
+
+ /* Clear MIPI mode */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= ~GLK_MIPIIO_ENABLE;
+ I915_WRITE(MIPI_CTRL(port), tmp);
+ }
+}
+
+static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
+{
+ glk_dsi_enter_low_power_mode(encoder);
+ glk_dsi_disable_mipi_io(encoder);
+}
+
+static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+
+ DRM_DEBUG_KMS("\n");
+ for_each_dsi_port(port, intel_dsi->ports) {
+ /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
+ i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+ BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
+ u32 val;
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
+ ULPS_STATE_ENTER);
+ usleep_range(2000, 2500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
+ ULPS_STATE_EXIT);
+ usleep_range(2000, 2500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
+ ULPS_STATE_ENTER);
+ usleep_range(2000, 2500);
+
+ /*
+ * On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI
+ * Port A only. MIPI Port C has no similar bit for checking.
+ */
+ if ((IS_GEN9_LP(dev_priv) || port == PORT_A) &&
+ intel_wait_for_register(&dev_priv->uncore,
+ port_ctrl, AFE_LATCHOUT, 0,
+ 30))
+ DRM_ERROR("DSI LP not going Low\n");
+
+ /* Disable MIPI PHY transparent latch */
+ val = I915_READ(port_ctrl);
+ I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD);
+ usleep_range(1000, 1500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), 0x00);
+ usleep_range(2000, 2500);
+ }
+}
+
+static void intel_dsi_port_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+
+ if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
+ u32 temp;
+ if (IS_GEN9_LP(dev_priv)) {
+ for_each_dsi_port(port, intel_dsi->ports) {
+ temp = I915_READ(MIPI_CTRL(port));
+ temp &= ~BXT_PIXEL_OVERLAP_CNT_MASK |
+ intel_dsi->pixel_overlap <<
+ BXT_PIXEL_OVERLAP_CNT_SHIFT;
+ I915_WRITE(MIPI_CTRL(port), temp);
+ }
+ } else {
+ temp = I915_READ(VLV_CHICKEN_3);
+ temp &= ~PIXEL_OVERLAP_CNT_MASK |
+ intel_dsi->pixel_overlap <<
+ PIXEL_OVERLAP_CNT_SHIFT;
+ I915_WRITE(VLV_CHICKEN_3, temp);
+ }
+ }
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+ BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
+ u32 temp;
+
+ temp = I915_READ(port_ctrl);
+
+ temp &= ~LANE_CONFIGURATION_MASK;
+ temp &= ~DUAL_LINK_MODE_MASK;
+
+ if (intel_dsi->ports == (BIT(PORT_A) | BIT(PORT_C))) {
+ temp |= (intel_dsi->dual_link - 1)
+ << DUAL_LINK_MODE_SHIFT;
+ if (IS_BROXTON(dev_priv))
+ temp |= LANE_CONFIGURATION_DUAL_LINK_A;
+ else
+ temp |= crtc->pipe ?
+ LANE_CONFIGURATION_DUAL_LINK_B :
+ LANE_CONFIGURATION_DUAL_LINK_A;
+ }
+
+ if (intel_dsi->pixel_format != MIPI_DSI_FMT_RGB888)
+ temp |= DITHERING_ENABLE;
+
+ /* assert ip_tg_enable signal */
+ I915_WRITE(port_ctrl, temp | DPI_ENABLE);
+ POSTING_READ(port_ctrl);
+ }
+}
+
+static void intel_dsi_port_disable(struct intel_encoder *encoder)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+ BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
+ u32 temp;
+
+ /* de-assert ip_tg_enable signal */
+ temp = I915_READ(port_ctrl);
+ I915_WRITE(port_ctrl, temp & ~DPI_ENABLE);
+ POSTING_READ(port_ctrl);
+ }
+}
+
+static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
+ const struct intel_crtc_state *pipe_config);
+static void intel_dsi_unprepare(struct intel_encoder *encoder);
+
+/*
+ * Panel enable/disable sequences from the VBT spec.
+ *
+ * Note the spec has AssertReset / DeassertReset swapped from their
+ * usual naming. We use the normal names to avoid confusion (so below
+ * they are swapped compared to the spec).
+ *
+ * Steps starting with MIPI refer to VBT sequences, note that for v2
+ * VBTs several steps which have a VBT in v2 are expected to be handled
+ * directly by the driver, by directly driving gpios for example.
+ *
+ * v2 video mode seq v3 video mode seq command mode seq
+ * - power on - MIPIPanelPowerOn - power on
+ * - wait t1+t2 - wait t1+t2
+ * - MIPIDeassertResetPin - MIPIDeassertResetPin - MIPIDeassertResetPin
+ * - io lines to lp-11 - io lines to lp-11 - io lines to lp-11
+ * - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds
+ * - MIPITearOn
+ * - MIPIDisplayOn
+ * - turn on DPI - turn on DPI - set pipe to dsr mode
+ * - MIPIDisplayOn - MIPIDisplayOn
+ * - wait t5 - wait t5
+ * - backlight on - MIPIBacklightOn - backlight on
+ * ... ... ... issue mem cmds ...
+ * - backlight off - MIPIBacklightOff - backlight off
+ * - wait t6 - wait t6
+ * - MIPIDisplayOff
+ * - turn off DPI - turn off DPI - disable pipe dsr mode
+ * - MIPITearOff
+ * - MIPIDisplayOff - MIPIDisplayOff
+ * - io lines to lp-00 - io lines to lp-00 - io lines to lp-00
+ * - MIPIAssertResetPin - MIPIAssertResetPin - MIPIAssertResetPin
+ * - wait t3 - wait t3
+ * - power off - MIPIPanelPowerOff - power off
+ * - wait t4 - wait t4
+ */
+
+/*
+ * DSI port enable has to be done before pipe and plane enable, so we do it in
+ * the pre_enable hook instead of the enable hook.
+ */
+static void intel_dsi_pre_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *pipe_config,
+ const struct drm_connector_state *conn_state)
+{
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ struct drm_crtc *crtc = pipe_config->base.crtc;
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ enum port port;
+ u32 val;
+ bool glk_cold_boot = false;
+
+ DRM_DEBUG_KMS("\n");
+
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
+
+ /*
+ * The BIOS may leave the PLL in a wonky state where it doesn't
+ * lock. It needs to be fully powered down to fix it.
+ */
+ if (IS_GEN9_LP(dev_priv)) {
+ bxt_dsi_pll_disable(encoder);
+ bxt_dsi_pll_enable(encoder, pipe_config);
+ } else {
+ vlv_dsi_pll_disable(encoder);
+ vlv_dsi_pll_enable(encoder, pipe_config);
+ }
+
+ if (IS_BROXTON(dev_priv)) {
+ /* Add MIPI IO reset programming for modeset */
+ val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
+ I915_WRITE(BXT_P_CR_GT_DISP_PWRON,
+ val | MIPIO_RST_CTRL);
+
+ /* Power up DSI regulator */
+ I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
+ I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, 0);
+ }
+
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ u32 val;
+
+ /* Disable DPOunit clock gating, can stall pipe */
+ val = I915_READ(DSPCLK_GATE_D);
+ val |= DPOUNIT_CLOCK_GATE_DISABLE;
+ I915_WRITE(DSPCLK_GATE_D, val);
+ }
+
+ if (!IS_GEMINILAKE(dev_priv))
+ intel_dsi_prepare(encoder, pipe_config);
+
+ /* Power on, try both CRC pmic gpio and VBT */
+ if (intel_dsi->gpio_panel)
+ gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
+ intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
+
+ /* Deassert reset */
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
+
+ if (IS_GEMINILAKE(dev_priv)) {
+ glk_cold_boot = glk_dsi_enable_io(encoder);
+
+ /* Prepare port in cold boot(s3/s4) scenario */
+ if (glk_cold_boot)
+ intel_dsi_prepare(encoder, pipe_config);
+ }
+
+ /* Put device in ready state (LP-11) */
+ intel_dsi_device_ready(encoder);
+
+ /* Prepare port in normal boot scenario */
+ if (IS_GEMINILAKE(dev_priv) && !glk_cold_boot)
+ intel_dsi_prepare(encoder, pipe_config);
+
+ /* Send initialization commands in LP mode */
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
+
+ /* Enable port in pre-enable phase itself because as per hw team
+ * recommendation, port should be enabled befor plane & pipe */
+ if (is_cmd_mode(intel_dsi)) {
+ for_each_dsi_port(port, intel_dsi->ports)
+ I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_ON);
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
+ } else {
+ msleep(20); /* XXX */
+ for_each_dsi_port(port, intel_dsi->ports)
+ dpi_send_cmd(intel_dsi, TURN_ON, false, port);
+ intel_dsi_msleep(intel_dsi, 100);
+
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
+
+ intel_dsi_port_enable(encoder, pipe_config);
+ }
+
+ intel_panel_enable_backlight(pipe_config, conn_state);
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
+}
+
+/*
+ * DSI port disable has to be done after pipe and plane disable, so we do it in
+ * the post_disable hook.
+ */
+static void intel_dsi_disable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *old_crtc_state,
+ const struct drm_connector_state *old_conn_state)
+{
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+
+ DRM_DEBUG_KMS("\n");
+
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
+ intel_panel_disable_backlight(old_conn_state);
+
+ /*
+ * According to the spec we should send SHUTDOWN before
+ * MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing
+ * has shown that the v3 sequence works for v2 VBTs too
+ */
+ if (is_vid_mode(intel_dsi)) {
+ /* Send Shutdown command to the panel in LP mode */
+ for_each_dsi_port(port, intel_dsi->ports)
+ dpi_send_cmd(intel_dsi, SHUTDOWN, false, port);
+ msleep(10);
+ }
+}
+
+static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+ if (IS_GEMINILAKE(dev_priv))
+ glk_dsi_clear_device_ready(encoder);
+ else
+ vlv_dsi_clear_device_ready(encoder);
+}
+
+static void intel_dsi_post_disable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *pipe_config,
+ const struct drm_connector_state *conn_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 val;
+
+ DRM_DEBUG_KMS("\n");
+
+ if (is_vid_mode(intel_dsi)) {
+ for_each_dsi_port(port, intel_dsi->ports)
+ vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
+
+ intel_dsi_port_disable(encoder);
+ usleep_range(2000, 5000);
+ }
+
+ intel_dsi_unprepare(encoder);
+
+ /*
+ * if disable packets are sent before sending shutdown packet then in
+ * some next enable sequence send turn on packet error is observed
+ */
+ if (is_cmd_mode(intel_dsi))
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF);
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
+
+ /* Transition to LP-00 */
+ intel_dsi_clear_device_ready(encoder);
+
+ if (IS_BROXTON(dev_priv)) {
+ /* Power down DSI regulator to save power */
+ I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
+ I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT);
+
+ /* Add MIPI IO reset programming for modeset */
+ val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
+ I915_WRITE(BXT_P_CR_GT_DISP_PWRON,
+ val & ~MIPIO_RST_CTRL);
+ }
+
+ if (IS_GEN9_LP(dev_priv)) {
+ bxt_dsi_pll_disable(encoder);
+ } else {
+ u32 val;
+
+ vlv_dsi_pll_disable(encoder);
+
+ val = I915_READ(DSPCLK_GATE_D);
+ val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
+ I915_WRITE(DSPCLK_GATE_D, val);
+ }
+
+ /* Assert reset */
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
+
+ /* Power off, try both CRC pmic gpio and VBT */
+ intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
+ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
+ if (intel_dsi->gpio_panel)
+ gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
+
+ /*
+ * FIXME As we do with eDP, just make a note of the time here
+ * and perform the wait before the next panel power on.
+ */
+ intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay);
+}
+
+static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
+ enum pipe *pipe)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ intel_wakeref_t wakeref;
+ enum port port;
+ bool active = false;
+
+ DRM_DEBUG_KMS("\n");
+
+ wakeref = intel_display_power_get_if_enabled(dev_priv,
+ encoder->power_domain);
+ if (!wakeref)
+ return false;
+
+ /*
+ * On Broxton the PLL needs to be enabled with a valid divider
+ * configuration, otherwise accessing DSI registers will hang the
+ * machine. See BSpec North Display Engine registers/MIPI[BXT].
+ */
+ if (IS_GEN9_LP(dev_priv) && !bxt_dsi_pll_is_enabled(dev_priv))
+ goto out_put_power;
+
+ /* XXX: this only works for one DSI output */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ i915_reg_t ctrl_reg = IS_GEN9_LP(dev_priv) ?
+ BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
+ bool enabled = I915_READ(ctrl_reg) & DPI_ENABLE;
+
+ /*
+ * Due to some hardware limitations on VLV/CHV, the DPI enable
+ * bit in port C control register does not get set. As a
+ * workaround, check pipe B conf instead.
+ */
+ if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ port == PORT_C)
+ enabled = I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
+
+ /* Try command mode if video mode not enabled */
+ if (!enabled) {
+ u32 tmp = I915_READ(MIPI_DSI_FUNC_PRG(port));
+ enabled = tmp & CMD_MODE_DATA_WIDTH_MASK;
+ }
+
+ if (!enabled)
+ continue;
+
+ if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
+ continue;
+
+ if (IS_GEN9_LP(dev_priv)) {
+ u32 tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= BXT_PIPE_SELECT_MASK;
+ tmp >>= BXT_PIPE_SELECT_SHIFT;
+
+ if (WARN_ON(tmp > PIPE_C))
+ continue;
+
+ *pipe = tmp;
+ } else {
+ *pipe = port == PORT_A ? PIPE_A : PIPE_B;
+ }
+
+ active = true;
+ break;
+ }
+
+out_put_power:
+ intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
+
+ return active;
+}
+
+static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_display_mode *adjusted_mode =
+ &pipe_config->base.adjusted_mode;
+ struct drm_display_mode *adjusted_mode_sw;
+ struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ unsigned int lane_count = intel_dsi->lane_count;
+ unsigned int bpp, fmt;
+ enum port port;
+ u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+ u16 hfp_sw, hsync_sw, hbp_sw;
+ u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
+ crtc_hblank_start_sw, crtc_hblank_end_sw;
+
+ /* FIXME: hw readout should not depend on SW state */
+ adjusted_mode_sw = &crtc->config->base.adjusted_mode;
+
+ /*
+ * Atleast one port is active as encoder->get_config called only if
+ * encoder->get_hw_state() returns true.
+ */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (I915_READ(BXT_MIPI_PORT_CTRL(port)) & DPI_ENABLE)
+ break;
+ }
+
+ fmt = I915_READ(MIPI_DSI_FUNC_PRG(port)) & VID_MODE_FORMAT_MASK;
+ bpp = mipi_dsi_pixel_format_to_bpp(
+ pixel_format_from_register_bits(fmt));
+
+ pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
+
+ /* Enable Frame time stamo based scanline reporting */
+ adjusted_mode->private_flags |=
+ I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
+
+ /* In terms of pixels */
+ adjusted_mode->crtc_hdisplay =
+ I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
+ adjusted_mode->crtc_vdisplay =
+ I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
+ adjusted_mode->crtc_vtotal =
+ I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
+
+ hactive = adjusted_mode->crtc_hdisplay;
+ hfp = I915_READ(MIPI_HFP_COUNT(port));
+
+ /*
+ * Meaningful for video mode non-burst sync pulse mode only,
+ * can be zero for non-burst sync events and burst modes
+ */
+ hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port));
+ hbp = I915_READ(MIPI_HBP_COUNT(port));
+
+ /* harizontal values are in terms of high speed byte clock */
+ hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+
+ if (intel_dsi->dual_link) {
+ hfp *= 2;
+ hsync *= 2;
+ hbp *= 2;
+ }
+
+ /* vertical values are in terms of lines */
+ vfp = I915_READ(MIPI_VFP_COUNT(port));
+ vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port));
+ vbp = I915_READ(MIPI_VBP_COUNT(port));
+
+ adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp;
+ adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay;
+ adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start;
+ adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
+ adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
+
+ adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay;
+ adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start;
+ adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
+ adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
+
+ /*
+ * In BXT DSI there is no regs programmed with few horizontal timings
+ * in Pixels but txbyteclkhs.. So retrieval process adds some
+ * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
+ * Actually here for the given adjusted_mode, we are calculating the
+ * value programmed to the port and then back to the horizontal timing
+ * param in pixels. This is the expected value, including roundup errors
+ * And if that is same as retrieved value from port, then
+ * (HW state) adjusted_mode's horizontal timings are corrected to
+ * match with SW state to nullify the errors.
+ */
+ /* Calculating the value programmed to the Port register */
+ hfp_sw = adjusted_mode_sw->crtc_hsync_start -
+ adjusted_mode_sw->crtc_hdisplay;
+ hsync_sw = adjusted_mode_sw->crtc_hsync_end -
+ adjusted_mode_sw->crtc_hsync_start;
+ hbp_sw = adjusted_mode_sw->crtc_htotal -
+ adjusted_mode_sw->crtc_hsync_end;
+
+ if (intel_dsi->dual_link) {
+ hfp_sw /= 2;
+ hsync_sw /= 2;
+ hbp_sw /= 2;
+ }
+
+ hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+
+ /* Reverse calculating the adjusted mode parameters from port reg vals*/
+ hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+
+ if (intel_dsi->dual_link) {
+ hfp_sw *= 2;
+ hsync_sw *= 2;
+ hbp_sw *= 2;
+ }
+
+ crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw +
+ hsync_sw + hbp_sw;
+ crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay;
+ crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw;
+ crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay;
+ crtc_hblank_end_sw = crtc_htotal_sw;
+
+ if (adjusted_mode->crtc_htotal == crtc_htotal_sw)
+ adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal;
+
+ if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw)
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode_sw->crtc_hsync_start;
+
+ if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw)
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode_sw->crtc_hsync_end;
+
+ if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw)
+ adjusted_mode->crtc_hblank_start =
+ adjusted_mode_sw->crtc_hblank_start;
+
+ if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode_sw->crtc_hblank_end;
+}
+
+static void intel_dsi_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ u32 pclk;
+ DRM_DEBUG_KMS("\n");
+
+ pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
+
+ if (IS_GEN9_LP(dev_priv)) {
+ bxt_dsi_get_pipe_config(encoder, pipe_config);
+ pclk = bxt_dsi_get_pclk(encoder, pipe_config);
+ } else {
+ pclk = vlv_dsi_get_pclk(encoder, pipe_config);
+ }
+
+ if (pclk) {
+ pipe_config->base.adjusted_mode.crtc_clock = pclk;
+ pipe_config->port_clock = pclk;
+ }
+}
+
+/* return txclkesc cycles in terms of divider and duration in us */
+static u16 txclkesc(u32 divider, unsigned int us)
+{
+ switch (divider) {
+ case ESCAPE_CLOCK_DIVIDER_1:
+ default:
+ return 20 * us;
+ case ESCAPE_CLOCK_DIVIDER_2:
+ return 10 * us;
+ case ESCAPE_CLOCK_DIVIDER_4:
+ return 5 * us;
+ }
+}
+
+static void set_dsi_timings(struct drm_encoder *encoder,
+ const struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+ enum port port;
+ unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+ unsigned int lane_count = intel_dsi->lane_count;
+
+ u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+
+ hactive = adjusted_mode->crtc_hdisplay;
+ hfp = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_hdisplay;
+ hsync = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
+ hbp = adjusted_mode->crtc_htotal - adjusted_mode->crtc_hsync_end;
+
+ if (intel_dsi->dual_link) {
+ hactive /= 2;
+ if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
+ hactive += intel_dsi->pixel_overlap;
+ hfp /= 2;
+ hsync /= 2;
+ hbp /= 2;
+ }
+
+ vfp = adjusted_mode->crtc_vsync_start - adjusted_mode->crtc_vdisplay;
+ vsync = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start;
+ vbp = adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vsync_end;
+
+ /* horizontal values are in terms of high speed byte clock */
+ hactive = txbyteclkhs(hactive, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio);
+ hsync = txbyteclkhs(hsync, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (IS_GEN9_LP(dev_priv)) {
+ /*
+ * Program hdisplay and vdisplay on MIPI transcoder.
+ * This is different from calculated hactive and
+ * vactive, as they are calculated per channel basis,
+ * whereas these values should be based on resolution.
+ */
+ I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port),
+ adjusted_mode->crtc_hdisplay);
+ I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port),
+ adjusted_mode->crtc_vdisplay);
+ I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port),
+ adjusted_mode->crtc_vtotal);
+ }
+
+ I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
+ I915_WRITE(MIPI_HFP_COUNT(port), hfp);
+
+ /* meaningful for video mode non-burst sync pulse mode only,
+ * can be zero for non-burst sync events and burst modes */
+ I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
+ I915_WRITE(MIPI_HBP_COUNT(port), hbp);
+
+ /* vertical values are in terms of lines */
+ I915_WRITE(MIPI_VFP_COUNT(port), vfp);
+ I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
+ I915_WRITE(MIPI_VBP_COUNT(port), vbp);
+ }
+}
+
+static u32 pixel_format_to_reg(enum mipi_dsi_pixel_format fmt)
+{
+ switch (fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ return VID_MODE_FORMAT_RGB888;
+ case MIPI_DSI_FMT_RGB666:
+ return VID_MODE_FORMAT_RGB666;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ return VID_MODE_FORMAT_RGB666_PACKED;
+ case MIPI_DSI_FMT_RGB565:
+ return VID_MODE_FORMAT_RGB565;
+ default:
+ MISSING_CASE(fmt);
+ return VID_MODE_FORMAT_RGB666;
+ }
+}
+
+static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
+ const struct intel_crtc_state *pipe_config)
+{
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+ const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ enum port port;
+ unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+ u32 val, tmp;
+ u16 mode_hdisplay;
+
+ DRM_DEBUG_KMS("pipe %c\n", pipe_name(intel_crtc->pipe));
+
+ mode_hdisplay = adjusted_mode->crtc_hdisplay;
+
+ if (intel_dsi->dual_link) {
+ mode_hdisplay /= 2;
+ if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
+ mode_hdisplay += intel_dsi->pixel_overlap;
+ }
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ /*
+ * escape clock divider, 20MHz, shared for A and C.
+ * device ready must be off when doing this! txclkesc?
+ */
+ tmp = I915_READ(MIPI_CTRL(PORT_A));
+ tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
+ I915_WRITE(MIPI_CTRL(PORT_A), tmp |
+ ESCAPE_CLOCK_DIVIDER_1);
+
+ /* read request priority is per pipe */
+ tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= ~READ_REQUEST_PRIORITY_MASK;
+ I915_WRITE(MIPI_CTRL(port), tmp |
+ READ_REQUEST_PRIORITY_HIGH);
+ } else if (IS_GEN9_LP(dev_priv)) {
+ enum pipe pipe = intel_crtc->pipe;
+
+ tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= ~BXT_PIPE_SELECT_MASK;
+
+ tmp |= BXT_PIPE_SELECT(pipe);
+ I915_WRITE(MIPI_CTRL(port), tmp);
+ }
+
+ /* XXX: why here, why like this? handling in irq handler?! */
+ I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff);
+ I915_WRITE(MIPI_INTR_EN(port), 0xffffffff);
+
+ I915_WRITE(MIPI_DPHY_PARAM(port), intel_dsi->dphy_reg);
+
+ I915_WRITE(MIPI_DPI_RESOLUTION(port),
+ adjusted_mode->crtc_vdisplay << VERTICAL_ADDRESS_SHIFT |
+ mode_hdisplay << HORIZONTAL_ADDRESS_SHIFT);
+ }
+
+ set_dsi_timings(encoder, adjusted_mode);
+
+ val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
+ if (is_cmd_mode(intel_dsi)) {
+ val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
+ val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
+ } else {
+ val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
+ val |= pixel_format_to_reg(intel_dsi->pixel_format);
+ }
+
+ tmp = 0;
+ if (intel_dsi->eotp_pkt == 0)
+ tmp |= EOT_DISABLE;
+ if (intel_dsi->clock_stop)
+ tmp |= CLOCKSTOP;
+
+ if (IS_GEN9_LP(dev_priv)) {
+ tmp |= BXT_DPHY_DEFEATURE_EN;
+ if (!is_cmd_mode(intel_dsi))
+ tmp |= BXT_DEFEATURE_DPI_FIFO_CTR;
+ }
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
+
+ /* timeouts for recovery. one frame IIUC. if counter expires,
+ * EOT and stop state. */
+
+ /*
+ * In burst mode, value greater than one DPI line Time in byte
+ * clock (txbyteclkhs) To timeout this timer 1+ of the above
+ * said value is recommended.
+ *
+ * In non-burst mode, Value greater than one DPI frame time in
+ * byte clock(txbyteclkhs) To timeout this timer 1+ of the above
+ * said value is recommended.
+ *
+ * In DBI only mode, value greater than one DBI frame time in
+ * byte clock(txbyteclkhs) To timeout this timer 1+ of the above
+ * said value is recommended.
+ */
+
+ if (is_vid_mode(intel_dsi) &&
+ intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
+ I915_WRITE(MIPI_HS_TX_TIMEOUT(port),
+ txbyteclkhs(adjusted_mode->crtc_htotal, bpp,
+ intel_dsi->lane_count,
+ intel_dsi->burst_mode_ratio) + 1);
+ } else {
+ I915_WRITE(MIPI_HS_TX_TIMEOUT(port),
+ txbyteclkhs(adjusted_mode->crtc_vtotal *
+ adjusted_mode->crtc_htotal,
+ bpp, intel_dsi->lane_count,
+ intel_dsi->burst_mode_ratio) + 1);
+ }
+ I915_WRITE(MIPI_LP_RX_TIMEOUT(port), intel_dsi->lp_rx_timeout);
+ I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(port),
+ intel_dsi->turn_arnd_val);
+ I915_WRITE(MIPI_DEVICE_RESET_TIMER(port),
+ intel_dsi->rst_timer_val);
+
+ /* dphy stuff */
+
+ /* in terms of low power clock */
+ I915_WRITE(MIPI_INIT_COUNT(port),
+ txclkesc(intel_dsi->escape_clk_div, 100));
+
+ if (IS_GEN9_LP(dev_priv) && (!intel_dsi->dual_link)) {
+ /*
+ * BXT spec says write MIPI_INIT_COUNT for
+ * both the ports, even if only one is
+ * getting used. So write the other port
+ * if not in dual link mode.
+ */
+ I915_WRITE(MIPI_INIT_COUNT(port ==
+ PORT_A ? PORT_C : PORT_A),
+ intel_dsi->init_count);
+ }
+
+ /* recovery disables */
+ I915_WRITE(MIPI_EOT_DISABLE(port), tmp);
+
+ /* in terms of low power clock */
+ I915_WRITE(MIPI_INIT_COUNT(port), intel_dsi->init_count);
+
+ /* in terms of txbyteclkhs. actual high to low switch +
+ * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
+ *
+ * XXX: write MIPI_STOP_STATE_STALL?
+ */
+ I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(port),
+ intel_dsi->hs_to_lp_count);
+
+ /* XXX: low power clock equivalence in terms of byte clock.
+ * the number of byte clocks occupied in one low power clock.
+ * based on txbyteclkhs and txclkesc.
+ * txclkesc time / txbyteclk time * (105 + MIPI_STOP_STATE_STALL
+ * ) / 105.???
+ */
+ I915_WRITE(MIPI_LP_BYTECLK(port), intel_dsi->lp_byte_clk);
+
+ if (IS_GEMINILAKE(dev_priv)) {
+ I915_WRITE(MIPI_TLPX_TIME_COUNT(port),
+ intel_dsi->lp_byte_clk);
+ /* Shadow of DPHY reg */
+ I915_WRITE(MIPI_CLK_LANE_TIMING(port),
+ intel_dsi->dphy_reg);
+ }
+
+ /* the bw essential for transmitting 16 long packets containing
+ * 252 bytes meant for dcs write memory command is programmed in
+ * this register in terms of byte clocks. based on dsi transfer
+ * rate and the number of lanes configured the time taken to
+ * transmit 16 long packets in a dsi stream varies. */
+ I915_WRITE(MIPI_DBI_BW_CTRL(port), intel_dsi->bw_timer);
+
+ I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(port),
+ intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT |
+ intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
+
+ if (is_vid_mode(intel_dsi))
+ /* Some panels might have resolution which is not a
+ * multiple of 64 like 1366 x 768. Enable RANDOM
+ * resolution support for such panels by default */
+ I915_WRITE(MIPI_VIDEO_MODE_FORMAT(port),
+ intel_dsi->video_frmt_cfg_bits |
+ intel_dsi->video_mode_format |
+ IP_TG_CONFIG |
+ RANDOM_DPI_DISPLAY_RESOLUTION);
+ }
+}
+
+static void intel_dsi_unprepare(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 val;
+
+ if (IS_GEMINILAKE(dev_priv))
+ return;
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ /* Panel commands can be sent when clock is in LP11 */
+ I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
+
+ if (IS_GEN9_LP(dev_priv))
+ bxt_dsi_reset_clocks(encoder, port);
+ else
+ vlv_dsi_reset_clocks(encoder, port);
+ I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
+
+ val = I915_READ(MIPI_DSI_FUNC_PRG(port));
+ val &= ~VID_MODE_FORMAT_MASK;
+ I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
+ }
+}
+
+static void intel_dsi_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+
+ /* dispose of the gpios */
+ if (intel_dsi->gpio_panel)
+ gpiod_put(intel_dsi->gpio_panel);
+
+ intel_encoder_destroy(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dsi_funcs = {
+ .destroy = intel_dsi_encoder_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
+ .get_modes = intel_dsi_get_modes,
+ .mode_valid = intel_dsi_mode_valid,
+ .atomic_check = intel_digital_connector_atomic_check,
+};
+
+static const struct drm_connector_funcs intel_dsi_connector_funcs = {
+ .late_register = intel_connector_register,
+ .early_unregister = intel_connector_unregister,
+ .destroy = intel_connector_destroy,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .atomic_get_property = intel_digital_connector_atomic_get_property,
+ .atomic_set_property = intel_digital_connector_atomic_set_property,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+ .atomic_duplicate_state = intel_digital_connector_duplicate_state,
+};
+
+static enum drm_panel_orientation
+vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
+{
+ struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+ struct intel_encoder *encoder = connector->encoder;
+ enum intel_display_power_domain power_domain;
+ enum drm_panel_orientation orientation;
+ struct intel_plane *plane;
+ struct intel_crtc *crtc;
+ intel_wakeref_t wakeref;
+ enum pipe pipe;
+ u32 val;
+
+ if (!encoder->get_hw_state(encoder, &pipe))
+ return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+
+ crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
+ plane = to_intel_plane(crtc->base.primary);
+
+ power_domain = POWER_DOMAIN_PIPE(pipe);
+ wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
+ if (!wakeref)
+ return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+
+ val = I915_READ(DSPCNTR(plane->i9xx_plane));
+
+ if (!(val & DISPLAY_PLANE_ENABLE))
+ orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+ else if (val & DISPPLANE_ROTATE_180)
+ orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+ else
+ orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+
+ intel_display_power_put(dev_priv, power_domain, wakeref);
+
+ return orientation;
+}
+
+static enum drm_panel_orientation
+vlv_dsi_get_panel_orientation(struct intel_connector *connector)
+{
+ struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+ enum drm_panel_orientation orientation;
+
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ orientation = vlv_dsi_get_hw_panel_orientation(connector);
+ if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ return orientation;
+ }
+
+ return intel_dsi_get_panel_orientation(connector);
+}
+
+static void intel_dsi_add_properties(struct intel_connector *connector)
+{
+ struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+
+ if (connector->panel.fixed_mode) {
+ u32 allowed_scalers;
+
+ allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN);
+ if (!HAS_GMCH(dev_priv))
+ allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER);
+
+ drm_connector_attach_scaling_mode_property(&connector->base,
+ allowed_scalers);
+
+ connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
+
+ connector->base.display_info.panel_orientation =
+ vlv_dsi_get_panel_orientation(connector);
+ drm_connector_init_panel_orientation_property(
+ &connector->base,
+ connector->panel.fixed_mode->hdisplay,
+ connector->panel.fixed_mode->vdisplay);
+ }
+}
+
+#define NS_KHZ_RATIO 1000000
+
+#define PREPARE_CNT_MAX 0x3F
+#define EXIT_ZERO_CNT_MAX 0x3F
+#define CLK_ZERO_CNT_MAX 0xFF
+#define TRAIL_CNT_MAX 0x1F
+
+static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
+{
+ struct drm_device *dev = intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+ u32 tlpx_ns, extra_byte_count, tlpx_ui;
+ u32 ui_num, ui_den;
+ u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
+ u32 ths_prepare_ns, tclk_trail_ns;
+ u32 tclk_prepare_clkzero, ths_prepare_hszero;
+ u32 lp_to_hs_switch, hs_to_lp_switch;
+ u32 mul;
+
+ tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
+
+ switch (intel_dsi->lane_count) {
+ case 1:
+ case 2:
+ extra_byte_count = 2;
+ break;
+ case 3:
+ extra_byte_count = 4;
+ break;
+ case 4:
+ default:
+ extra_byte_count = 3;
+ break;
+ }
+
+ /* in Kbps */
+ ui_num = NS_KHZ_RATIO;
+ ui_den = intel_dsi_bitrate(intel_dsi);
+
+ tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
+ ths_prepare_hszero = mipi_config->ths_prepare_hszero;
+
+ /*
+ * B060
+ * LP byte clock = TLPX/ (8UI)
+ */
+ intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
+
+ /* DDR clock period = 2 * UI
+ * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
+ * UI(nsec) = 10^6 / bitrate
+ * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
+ * DDR clock count = ns_value / DDR clock period
+ *
+ * For GEMINILAKE dphy_param_reg will be programmed in terms of
+ * HS byte clock count for other platform in HS ddr clock count
+ */
+ mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
+ ths_prepare_ns = max(mipi_config->ths_prepare,
+ mipi_config->tclk_prepare);
+
+ /* prepare count */
+ prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
+
+ if (prepare_cnt > PREPARE_CNT_MAX) {
+ DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
+ prepare_cnt = PREPARE_CNT_MAX;
+ }
+
+ /* exit zero count */
+ exit_zero_cnt = DIV_ROUND_UP(
+ (ths_prepare_hszero - ths_prepare_ns) * ui_den,
+ ui_num * mul
+ );
+
+ /*
+ * Exit zero is unified val ths_zero and ths_exit
+ * minimum value for ths_exit = 110ns
+ * min (exit_zero_cnt * 2) = 110/UI
+ * exit_zero_cnt = 55/UI
+ */
+ if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
+ exit_zero_cnt += 1;
+
+ if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
+ exit_zero_cnt = EXIT_ZERO_CNT_MAX;
+ }
+
+ /* clk zero count */
+ clk_zero_cnt = DIV_ROUND_UP(
+ (tclk_prepare_clkzero - ths_prepare_ns)
+ * ui_den, ui_num * mul);
+
+ if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
+ clk_zero_cnt = CLK_ZERO_CNT_MAX;
+ }
+
+ /* trail count */
+ tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
+ trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
+
+ if (trail_cnt > TRAIL_CNT_MAX) {
+ DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
+ trail_cnt = TRAIL_CNT_MAX;
+ }
+
+ /* B080 */
+ intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
+ clk_zero_cnt << 8 | prepare_cnt;
+
+ /*
+ * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
+ * mul + 10UI + Extra Byte Count
+ *
+ * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
+ * Extra Byte Count is calculated according to number of lanes.
+ * High Low Switch Count is the Max of LP to HS and
+ * HS to LP switch count
+ *
+ */
+ tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
+
+ /* B044 */
+ /* FIXME:
+ * The comment above does not match with the code */
+ lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
+ exit_zero_cnt * mul + 10, 8);
+
+ hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
+
+ intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
+ intel_dsi->hs_to_lp_count += extra_byte_count;
+
+ /* B088 */
+ /* LP -> HS for clock lanes
+ * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
+ * extra byte count
+ * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
+ * 2(in UI) + extra byte count
+ * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
+ * 8 + extra byte count
+ */
+ intel_dsi->clk_lp_to_hs_count =
+ DIV_ROUND_UP(
+ 4 * tlpx_ui + prepare_cnt * 2 +
+ clk_zero_cnt * 2,
+ 8);
+
+ intel_dsi->clk_lp_to_hs_count += extra_byte_count;
+
+ /* HS->LP for Clock Lanes
+ * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
+ * Extra byte count
+ * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
+ * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
+ * Extra byte count
+ */
+ intel_dsi->clk_hs_to_lp_count =
+ DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
+ 8);
+ intel_dsi->clk_hs_to_lp_count += extra_byte_count;
+
+ intel_dsi_log_params(intel_dsi);
+}
+
+void vlv_dsi_init(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = &dev_priv->drm;
+ struct intel_dsi *intel_dsi;
+ struct intel_encoder *intel_encoder;
+ struct drm_encoder *encoder;
+ struct intel_connector *intel_connector;
+ struct drm_connector *connector;
+ struct drm_display_mode *current_mode, *fixed_mode;
+ enum port port;
+
+ DRM_DEBUG_KMS("\n");
+
+ /* There is no detection method for MIPI so rely on VBT */
+ if (!intel_bios_is_dsi_present(dev_priv, &port))
+ return;
+
+ if (IS_GEN9_LP(dev_priv))
+ dev_priv->mipi_mmio_base = BXT_MIPI_BASE;
+ else
+ dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
+
+ intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
+ if (!intel_dsi)
+ return;
+
+ intel_connector = intel_connector_alloc();
+ if (!intel_connector) {
+ kfree(intel_dsi);
+ return;
+ }
+
+ intel_encoder = &intel_dsi->base;
+ encoder = &intel_encoder->base;
+ intel_dsi->attached_connector = intel_connector;
+
+ connector = &intel_connector->base;
+
+ drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI,
+ "DSI %c", port_name(port));
+
+ intel_encoder->compute_config = intel_dsi_compute_config;
+ intel_encoder->pre_enable = intel_dsi_pre_enable;
+ intel_encoder->disable = intel_dsi_disable;
+ intel_encoder->post_disable = intel_dsi_post_disable;
+ intel_encoder->get_hw_state = intel_dsi_get_hw_state;
+ intel_encoder->get_config = intel_dsi_get_config;
+ intel_encoder->update_pipe = intel_panel_update_backlight;
+
+ intel_connector->get_hw_state = intel_connector_get_hw_state;
+
+ intel_encoder->port = port;
+ intel_encoder->type = INTEL_OUTPUT_DSI;
+ intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
+ intel_encoder->cloneable = 0;
+
+ /*
+ * On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
+ * port C. BXT isn't limited like this.
+ */
+ if (IS_GEN9_LP(dev_priv))
+ intel_encoder->crtc_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C);
+ else if (port == PORT_A)
+ intel_encoder->crtc_mask = BIT(PIPE_A);
+ else
+ intel_encoder->crtc_mask = BIT(PIPE_B);
+
+ if (dev_priv->vbt.dsi.config->dual_link)
+ intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
+ else
+ intel_dsi->ports = BIT(port);
+
+ intel_dsi->dcs_backlight_ports = dev_priv->vbt.dsi.bl_ports;
+ intel_dsi->dcs_cabc_ports = dev_priv->vbt.dsi.cabc_ports;
+
+ /* Create a DSI host (and a device) for each port. */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ struct intel_dsi_host *host;
+
+ host = intel_dsi_host_init(intel_dsi, &intel_dsi_host_ops,
+ port);
+ if (!host)
+ goto err;
+
+ intel_dsi->dsi_hosts[port] = host;
+ }
+
+ if (!intel_dsi_vbt_init(intel_dsi, MIPI_DSI_GENERIC_PANEL_ID)) {
+ DRM_DEBUG_KMS("no device found\n");
+ goto err;
+ }
+
+ /* Use clock read-back from current hw-state for fastboot */
+ current_mode = intel_encoder_current_mode(intel_encoder);
+ if (current_mode) {
+ DRM_DEBUG_KMS("Calculated pclk %d GOP %d\n",
+ intel_dsi->pclk, current_mode->clock);
+ if (intel_fuzzy_clock_check(intel_dsi->pclk,
+ current_mode->clock)) {
+ DRM_DEBUG_KMS("Using GOP pclk\n");
+ intel_dsi->pclk = current_mode->clock;
+ }
+
+ kfree(current_mode);
+ }
+
+ vlv_dphy_param_init(intel_dsi);
+
+ /*
+ * In case of BYT with CRC PMIC, we need to use GPIO for
+ * Panel control.
+ */
+ if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC)) {
+ intel_dsi->gpio_panel =
+ gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
+
+ if (IS_ERR(intel_dsi->gpio_panel)) {
+ DRM_ERROR("Failed to own gpio for panel control\n");
+ intel_dsi->gpio_panel = NULL;
+ }
+ }
+
+ drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
+
+ connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
+
+ intel_connector_attach_encoder(intel_connector, intel_encoder);
+
+ mutex_lock(&dev->mode_config.mutex);
+ fixed_mode = intel_panel_vbt_fixed_mode(intel_connector);
+ mutex_unlock(&dev->mode_config.mutex);
+
+ if (!fixed_mode) {
+ DRM_DEBUG_KMS("no fixed mode\n");
+ goto err_cleanup_connector;
+ }
+
+ intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
+ intel_panel_setup_backlight(connector, INVALID_PIPE);
+
+ intel_dsi_add_properties(intel_connector);
+
+ return;
+
+err_cleanup_connector:
+ drm_connector_cleanup(&intel_connector->base);
+err:
+ drm_encoder_cleanup(&intel_encoder->base);
+ kfree(intel_dsi);
+ kfree(intel_connector);
+}